Gigabyte Computer Hardware 7VT600 RZ User Manual

7VT600-RZ /  
7VT600-RZ-C  
AMD Athlon/ AthlonXP / DuronSocket A Processor Motherboard  
User's Manual  
Rev. 1003  
12ME-7VT600RZ-1003  
Copyright  
© 2004GIGABYTETECHNOLOGYCO., LTD  
CopyrightbyGIGA-BYTETECHNOLOGYCO.,LTD. ("GBT"). Nopartofthismanualmaybereproduced ortransmitted inanyfrom  
withoutthe expressed,written permission ofGBT.  
Trademarks  
Third-partybrandsand namesare the propertyof theirrespective owners.  
Notice  
Please do not remove anylabelson motherboard, thismayvoid the warrantyofthismotherboard.  
Due to rapid change in technology, some of the specificationsmightbe outofdatebefore publication ofthisbooklet.  
The authorassumesnoresponsibilityfor anyerrorsoromissionsthatmayappearin thisdocument nordoesthe authormake a  
commitmentto updatetheinformationcontained herein.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing Your Computer  
Computer motherboards and expansion cards contain very delicate Integrated Circuit(IC) chips. To  
protectthem againstdamagefrom static electricity, youshouldfollowsomeprecautions wheneveryou  
work on your computer.  
1. Unplug yourcomputer when working onthe inside.  
2. Use agroundedwrist strap beforehandlingcomputer components.Ifyou do nothaveone,  
touch both ofyour hands to a safelygrounded object or to a metal object, such as the power  
supplycase.  
3. Hold components bythe edges and trynottouch the IC chips, leads or connectors, or other  
components.  
4. Place components on agrounded antistatic pad or on thebag thatcame withthe components  
whenever the componentsare separated from the system.  
5. Ensure that theATX power supply is switched off before you plug inor remove the ATX power  
connectoronthemotherboard.  
Installing the motherboard to the chassis  
Ifthemotherboardhasmountingholes,buttheydon'tlineup withtheholesonthebase andthereare  
noslots to attachthe spacers, do notbecome alarmedyou can still attach thespacers to themounting  
holes.Justcutthebottomportionofthespacers (thespacer maybe a littlehard to cutoff,so be carefulof  
your hands).In this way you can still attach the motherboard to the base without worrying aboutshort  
circuits. Sometimes youmayneed to use theplastic springs toisolate the screw from the motherboard  
PCBsurface, because the circuitwire maybe near by the hole. Be careful, don'tlet the screw contact  
anyprintedcircuitwriteor partson thePCB thatare near the fixinghole, otherwise it maydamage the  
boardorcauseboardmalfunctioning.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Content  
Chapter1 Introduction ................................................................................................5  
FeaturesSummary..............................................................................................................................5  
7VT600-RZSeriesMotherboardLayout..............................................................................................7  
BlockDiagram .....................................................................................................................................8  
HardwareInstallation Process ............................................................................................................9  
Step 1: Set System Jumper (JP1) ......................................................................................................9  
Step 2: Install the Central Processing Unit (CPU) ...........................................................................10  
Step 2-1: CPU Installation .........................................................................................................10  
Step 2-2: CPU Cooling Fan Installation ....................................................................................10  
Step 3: InstallMemory Modules ....................................................................................................... 11  
Step4: InstallExpansion Cards .......................................................................................................12  
Step 5: Install I/O Peripherals Cables ..............................................................................................12  
Step 5-1: I/O Back Panel Introduction .......................................................................................12  
Step 5-2: ConnectorsIntroduction .............................................................................................13  
Chapter 2 BIOS Setup ............................................................................................. 21  
The Main Menu (For example: BIOS Ver. : F4c) ............................................................................21  
StandardCMOSFeatures ................................................................................................................23  
Advanced BIOS Features ................................................................................................................25  
IntegratedPeripherals ........................................................................................................................26  
PowerManagementSetup ................................................................................................................28  
PnP/PCIConfigurations ....................................................................................................................30  
PCI Health Status .............................................................................................................................31  
Frequency/VoltageControl ................................................................................................................32  
LoadFail-SafeDefaults ......................................................................................................................34  
LoadOptimizedDefaults ....................................................................................................................34  
SetSupervisor/User Password .......................................................................................................35  
Save & Exit Setup ............................................................................................................................36  
Exit Without Saving ...........................................................................................................................36  
Chapter 3 Install Drivers ........................................................................................... 37  
7VT600-RZ Series Motherboard  
- 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 1 Introduction  
Features Summary  
CPU  
Socket A processor  
AMD AthlonTM/ AthlonTM XP/ DuronTM (K7)  
128K L1 & 512K/256K/64K L2 cache on die  
200/266/333/400MHz FSB  
Supports 1.4GHz and faster  
North Bridge: VIA KT600  
Sourth Bridge: VIA VT8235  
3 184-pin DDR sockets  
Supports DDR DRAM PC2100/PC2700/PC3200  
Supports up to 3.0GB DDR (Max)  
Supports only 2.5V DDR DIMM  
1 AGP slot supports 8X/4X mode(1.5V)  
5 PCI slots supports 33M Hz & PCI 2.2 compliant  
2 IDE controllers provides IDE HDD/CD-ROM (IDE1, IDE2)  
with PIO, Bus M aster (Ultra DM A33/ATA66/ATA100/ATA133)  
operation mode  
Chipset  
Memory  
Slots  
On-Board IDE  
On-Board Floppy  
On-Board Peripherals  
Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M and 2.88M bytes  
1 Parallel port supports Norm al/EPP/ECP mode  
2 Serial port (COM A & COM B)  
6 x USB 2.0/1.1 (4 by cable)  
PS/2 Keyboard interface and PS/2 Mouse interface  
VIA VT6103L  
On-Board LAN *  
On-Board Sound  
1 RJ45 port  
Realtek ALC655 CODEC  
Supports Jack Sensing function  
Line Out / 2 front speaker  
Line In / 2 rear speaker(by s/w switch)  
M ic In / center & subwoofer(by s/w switch)  
SPDIF Out /SPDIF In  
CD In / AUX In / Game Port  
Built in VIA VT8235 Chipset  
Licensed Award BIOS  
Supports Q-Flash  
On-Board USB 2.0  
BIOS  
I/O Control  
Hardware M onitor  
IT8705  
CPU/System Fan Revolution detect  
CPU/System temperature detect  
System voltage detect  
CPU/System fan fail warning  
Therm al shutdown function  
" * " Support 7VT600-RZ only.  
- 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Additional Features  
PS/2 Keyboard power on by password,  
PS/2 M ouse power on by double click  
Exter nal M odem wake up  
STR(Suspend-To-RAM)  
AC Recovery  
Poly fuse for keyboard over-current protection  
USB KB/M ouse wake up from S3  
Supports @BIOS  
Supports EasyTune 4  
Over Voltage (CPU/AGP/DDR/PCI) by BIOS  
Over Clock (CPU/AGP/DDR/PCI) by BIOS  
Overclocking  
Form Factor  
30.5cm x 20.0cm ATX size form factor, 4 layers PCB.  
Please set theCPU host frequencyin accordance with your processor'sspecifications.  
We don't recommend you to set the system bus frequency over the CPU's specification  
becausethesespecificbus frequenciesare notthestandardspecificationsforCPU,chipsetand  
mostof theperipherals. Whether your systemcan run under thesespecific busfrequencies  
properlywill depend on yourhardware configurations,including CPU, Memory,Cards… etc.  
7VT600-RZ Series Motherboard  
- 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7VT600-RZ Series Motherboard Layout  
20.0 cm  
CPU_FAN  
KB_MS  
ATX  
SOCKETA  
FDD  
VIA KT600  
AUDIO  
AGP  
CLR_CMOS  
PCI1  
BATTERY  
VT6103L*  
JP1  
PCI2  
PCI3  
VT8 235  
CODEC  
SYS_FAN  
PCI4  
PCI5  
SUR_CEN  
IDE2  
IDE1  
IT8 705  
BIOS  
F_U SB1  
F_U SB2  
CI  
F_PANEL  
AUX_IN  
GAME  
PWR_LED  
SPDIF_IO  
" * " Support 7VT600-RZ only.  
- 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Block Diagram  
CPUCLK+/- (100/133/166/200MHz)  
AMD-K7TM  
AGP 4X/8X  
System Bus100/133/166/200MHz  
AGPCLK  
(66MHz)  
DDR RAM  
HCLK+/- (100/133/166/200MHz)  
GCLK(66MHz)  
VIA  
KT600  
5 PCI  
RJ45*  
33 MHz  
14.318 MHz  
48 MHz  
VIA  
VT6103L*  
VCLK(66MHz)  
BIOS  
VIA  
Game Port  
Floppy  
VT8235  
IT8705  
LPT Port  
24 MHz  
33 MHz  
2 COM  
Ports  
ATA66/100/133  
6 USB  
Ports  
AC97  
IDE Channels  
CODEC  
PCICLK  
(33MHz)  
PS/2 KB/Mouse  
PCICLK (33MHz)  
USBCLK (48MHz)  
14.318 MHz  
HCLK+/- (100/133/166/200MHz)  
CPUCLK+/- (100/133/166/200MHz)  
AGPCLK (66MHz)  
CLK  
GEN  
33 MHz  
V_Link (66MHz) / GCLK (66MHz)  
" * " Support 7VT600-RZ only.  
7VT600-RZ Series Motherboard  
- 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hardware Installation Process  
To set up your computer, you must complete the following steps:  
Step 1- Set System Jum per (JP1)  
Step 2- Install the Central Processing Unit (CPU)  
Step 3- Install memory modules  
Step 4- Install expansion cards  
Step 5- Install I/O Peripherals cables  
Step 3  
Step2  
Step 5  
Step 4  
Step 5  
Step 1  
Step 5  
Step 1: Set System Jumper (JP1)  
The system bus frequency can be switched at 100/133/166/200M Hz by adjusting system jumper (JP1).  
(The internal frequency depend on CPU.)  
Open: Auto  
1
Close: 100MHz (Defualt)  
1
JP1  
1-2  
CPU CLOCK  
100MHz  
Close  
Auto  
Open  
100MHz : Fix FSB 200M Hz CPU  
Auto : Support FSB 266/333/400 MHz CPU  
The "JP1" must set to "Auto" when you are using  
FSB 266/333/400MHz CPU.  
- 9 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2: Install the Central Processing Unit (CPU)  
Before installing the processor, adhere to the following warning:  
1. Please make sure the CPU type is supported by the motherboard.  
2. The processor will overheat without the heatsink and/or fan, resulting in permanent  
irreparable damage.  
3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause  
improper installation. Please change the insert orientation.  
4. Apply therm al grease between the processor and cooling fan.  
5. Never run the processor without the heatsink properly and firmly attached. Permanent  
dam age will result.  
6. Please set the CPU host frequency in accordance with your processor's specifications.  
We don't recommend you to set the system bus frequency over the CPU's specification  
because these specific bus frequencies are not the standard specifications for CPU,  
chipset and most of the peripherals. Whether your system can run under these specific  
bus frequencies properly will depend on your hardware configurations, including CPU,  
Memory, Cards… etc.  
Step 2-1: CPU Installation  
SocketActuationLever  
Figure 2.  
Locate Pin 1 in the socket and look  
for a (golden) cut edge on the CPU  
upper corner. Insert the CPU into  
the socket. (Do not force the CPU into the socket.) Then move the  
socket lever to the locked position while holding pressure on the  
center of the CPU.  
Figure 1.  
Pull the rod to the 90-degree  
directly.  
Step 2-2: CPU Cooling Fan Installation  
Figure 1.  
Figure 2.  
Figure 3.  
Apply the thermal tape(or grease) Fasten the cooling fan support-  
to provide better heat conduction ing-base onto the CPU socket  
between your CPU and cooling on the motherboard.  
fan.  
Make sure theCPU fan isplugged  
to the CPU fan connector, than  
the install completely.  
7VT600-RZ Series Motherboard  
- 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3: Install Memory Modules  
Before installing the mem ory modules, adhere to the following warning:  
1. When DIMM LED is ON, do not install / remove DIMM from socket.  
2. Please note that the DIMM module can only fit in one direction dueto the one notch. Wrong  
orientation will cause improper installation. Please change the insert orientation.  
The motherboard has 3 dual inline mem ory module (DIMM) sockets. The BIOS will automatically detects  
mem ory type and size. To install the mem ory m odule, just push it vertically into the DIMM socket. The  
DIM M module can only fit in one direction due to the notch. Memory size can vary between sockets.  
Notch  
DDR  
Support Unbuffered DDR DIMM Sizes type:  
64 Mbit (2Mx8x4banks)  
64 Mbit(1Mx16x4 banks)  
256Mbit(8Mx8x4 banks)  
512Mbit(8Mx16x4banks)  
128Mbit(4Mx8x4 banks)  
256Mbit(4Mx16x4banks)  
128Mbit(2Mx16x4banks)  
512Mbit(16Mx8x4banks)  
Total System Memory (Max3GB)  
1. The DIM M socket has a notch, so the DIM M  
memory module can only fit in one direction.  
2. Insert the DIM M m emory module vertically into  
the DIMM socket. Then push it down.  
3. Close the plastic clip at both edges of the DIMM  
sockets to lock the DIMM module.  
Reverse the installation steps when you wish to  
remove the DIMM module.  
- 11 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4: Install Expansion Cards  
1. Read the related expansion card's instruction document before install the expansion card into  
the com puter.  
2. Please m ake sure your AGP card is AGP 4X/8X (1.5V).  
AGP 4X/8X notch  
3. Please carefully pull out the small white- drawable bar at the end of the AGP slot when you try to  
install/ Uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly  
down on the slot .M ake sure your AGP card is locked by the sm all white- drawable bar.  
AGP Card  
Step 5: Install I/O Peripherals Cables  
y
Step 5-1: I/O Back Panel Introduction  
y
v
u
{
w
|
}
z
x
u
v
PS/2 Keyboard and PS/2 Mouse connector  
This connector supports standard PS/2 keyboard and PS/2 mouse.  
Parallel port (LPT)  
Device like printer can be connected to Parallel port.  
w/x Serial ports (COMA / COMB)  
Mouse and modem etc. can be connected to Serial port.  
y
z
LAN port *  
LAN is fast Ethernet with 10/100Mbps speed.  
USB port  
Before you connect your device(s) into USB connector(s), please make sure your device(s)  
such as USB keyboard, mouse, scanner, zip, speaker...etc. Have a standard USB interface.  
Also make sure your OS supports USB controller. If your OS does not support USB controller,  
please contact OS vendor for possible patch or driver upgrade. For more information please  
contact your OS or device(s) vendors.  
" * " Support 7VT600-RZ only.  
7VT600-RZ Series Motherboard  
- 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Line In jack  
{
|
Devices like CD-ROM, walkman etc. can be connect to Line In jack.  
Line Out jack  
Connect the stereo speakers or earphone to this connector.  
} MIC In jack  
Microphone can be connect to MIC In jack.  
After installation of the audio driver, you are able to use 2/4/6-channel audio feature by software  
selection. You can connect "Front speaker" to "Line Out" jack, Connect "Rear speaker" to "Line In"  
jack and connect "Center/Subwoofer" to "MIC In" jack.  
Step 5-2: Connectors Introduction  
1
3
5
17  
9
11  
8
2
10  
4
15  
1213 16  
6
7
14  
1) CPU_FAN  
2) SYS_FAN  
3) ATX (ATX Power)  
4) IDE1 / IDE2  
5) FDD  
10) SUR_CEN  
11) CD_IN  
12) AUX_IN  
13) SPDIF_IO  
14) F_USB1 / F_USB2  
15) GAME  
6) PWR_LED  
7) F_PANEL  
8) BATTERY  
9) F_AUDIO  
16) CI (Case Open)  
17) CLR_CMOS  
- 13 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1) CPU_FAN (CPU FAN Connector)  
Please note, a proper installation of the CPU cooler is essential to prevent the CPU from running  
under abnormal condition or damaged by overheating.The CPU fan connector supports Max.  
current up to 600 mA.  
Pin No.  
Definition  
GND  
+12V  
1
2
3
1
Sense  
2) SYS_FAN (System FAN Connector)  
This connector allows you to link with the cooling fan on the system case to lower the system  
temperature.  
Pin No.  
Definition  
GND  
+12V  
1
2
3
Sense  
1
3) ATX (ATXPower Connector)  
AC power cord should only be connected to your power supply unit after ATX power cable and  
other related devices are firmly connected to the mainboard.  
Pin No. Definition  
Pin No. Definition  
1 0  
2 0  
1
3.3V  
11  
3.3V  
2
3.3V  
12  
13  
14  
15  
16  
17  
18  
19  
20  
-12V  
3
GND  
GND  
4
VCC  
PS_ON(soft on/off)  
5
GND  
GND  
GND  
GND  
-5V  
6
VCC  
7
GND  
8
Power Good  
5V SB (stand by +5V)  
+12V  
1
1 1  
9
VCC  
VCC  
10  
7VT600-RZ Series Motherboard  
- 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4) IDE1/ IDE2(IDE1/IDE2 Connector)  
Please connect first harddisk to IDE1 and connect CDROM to IDE2. The red stripe of the ribbon  
cable must be the same side with the Pin1.  
1
2
3 9  
IDE2  
IDE1  
4 0  
5) FDD (Floppy Connector)  
Please connect the floppy drive ribbon cables to FDD. It supports 360K,720K,1.2M,1.44M and  
2.88Mbytes floppy disk types. The red stripe of the ribbon cable m ust be the same side with the  
Pin1.  
3 4  
3 3  
2
1
6) PWR_LED  
PWR_LED is connect with the system power indicator to indicate whether the system is on/off. It  
will blink when the system enters suspend mode. If you use dual color LED, power LED will turn  
to another color.  
Pin No.  
Definition  
MPD+  
MPD-  
1
2
3
1
MPD-  
- 15 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7) F_PANEL (2 x 10 pins Connector)  
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front  
panel to the F_PANEL connector according to the pin assignm ent below.  
Sp eaker Co nne ctor  
Messa ge L ED/  
Po we r/  
Soft Po we r  
Slee p LED  
Con nector  
1
1
1
1
2
1
2 0  
1 9  
1
Reset Switch  
IDE Ha rd Disk Active LED  
HD(IDEHard DiskActive LED)  
SPK(SpeakerConnector)  
Pin 1:LED anode(+)  
Pin 2:LED cathode(-)  
Pin1:VCC(+)  
Pin2-Pin 3:NC  
Pin4:Data(-)  
RST(ResetSwitch)  
Open:NormalOperation  
Close:ResetHardwareSystem  
Open:NormalOperation  
Close:PowerOn/Off  
Pin 1:LED anode(+)  
Pin 2:LED cathode(-)  
NC  
PW(SoftPowerConnector)  
MPD(MessageLED/Power/  
SleepLED)  
NC  
8) BATTERY (Battery)  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced.  
+
Replace only with the same or equivalent type  
recommended by the manufacturer.  
Dispose of used batteries according to the  
manufacturer's instructions.  
If you want to erase CM OS...  
1. Turn off the computer and unplug the power cord.  
2. Rem ove the battery, wait for 30 second.  
3. Re-install the battery.  
4. Plug the power cord and turn on the computer.  
7VT600-RZ Series Motherboard  
- 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9) F_AUDIO (Front Audio Connector)  
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.  
In order to utilize the front audio header, your chassis must have front audio connector. Also please  
make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find  
out if the chassis you are buying support front audio connector, please contact your dealer. Please  
note, you can have the alternative of using front audio connector or of using rear audio connector to  
play sound.  
Pin No.  
Definition  
MIC  
GND  
REF  
Power  
FrontAudio (R)  
RearAudio (R)  
Reserved  
No Pin  
FrontAudio (L)  
RearAudio (L)  
1
2
3
4
5
6
7
8
9
10  
9
1
1 0  
2
10) SUR_CEN (Surround Center Connector)  
Please contact your nearest dealer for optional SUR_CEN cable.  
Pin No.  
1
Definition  
SUROUTL  
SUROUTR  
GND  
No Pin  
CENTER_OUT  
BASS_OUT  
6
5
2
1
2
3
4
5
6
11) CD_IN (CD In Connector)  
Connect CD-ROM or DVD-ROM audio out to the connector.  
Pin No.  
Definition  
CD-L  
GND  
GND  
CD-R  
1
2
3
4
1
- 17 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
12) AUX_IN ( AUX In Connector)  
Connect other device (such as PCI TV Tunner audio out)to the connector.  
Pin No.  
Definition  
AUX-L  
GND  
GND  
AUX-R  
1
2
3
4
1
13) SPDIF_IO (SPDIF In/Out Connector)  
The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data  
to an external Dolby Digital Decoder. Use this feature only when your stereo system has digital input  
and output function. Use SPDIF in feature only when your device has digital output function. Be  
careful with the polarity of the SPDIF_IO connector. Check the pin assignment carefully while you  
connect the SPDIF cable, incorrect connection between the cable and connector will m ake the  
device unable to work or even damage it. For optional SPDIF cable, please contact your local  
dealer.  
Pin No.  
Definition  
VCC  
No Pin  
SPDIF  
SPDIFI  
GND  
1
2
3
4
5
6
2
1
6
5
GND  
7VT600-RZ Series Motherboard  
- 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14) F_ USB1 / F_USB2 (Front USB Connector)  
Be careful with the polarity of the F_USB connector. Check the pin assignment carefully while you  
connect the F_USB cable, incorrect connection between the cable and connector will make the  
device unable to work or even damage it. For optional F_USB cable, please contact your local  
dealer.  
Pin No.  
Definition  
1
2
3
4
5
6
7
8
9
10  
Power  
Power  
1 0  
9
2
1
USB0DX-/USB2DX-  
USB1Dy-/USB3 Dy-  
USB0DX+/USB2DX+  
USB1Dy+/USB3 Dy+  
GND  
GND  
No Pin  
NC  
15) GAME (Game Connector)  
This connector supports joystick, MIDI keyboard and other relate audio devices. Check the pin  
assignment while you connect the game cables. Please contact your nearest dealer for optional  
gam e cables.  
Pin No.  
Definition  
VCC  
Pin No.  
9
Definition  
GPSA1  
GND  
1
2
3
4
5
6
7
8
GRX1_R  
GND  
10  
2
1
1 6  
1 5  
11  
GPY1_R  
VCC  
GPSA2  
VCC  
12  
13  
GPSB1  
MSO_R  
GPSB2  
No Pin  
GPX2_R  
GPY2_R  
MSI_R  
14  
15  
16  
16) CI (Chassis Intrusion, Case Open)  
This 2-pin connector allows your system to enable or disable the "case open" item in BIOS if the  
system case begin rem ove.  
Pin No.  
1
2
Definition  
Signal  
GND  
1
- 19 -  
Hardware Installation Process  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17) CLR_CMOS (Clear CMOS)  
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily shor  
1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.  
Short: Clear CMOS  
1
Open: Normal  
1
7VT600-RZ Series Motherboard  
- 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Chapter 2 BIOS Setup  
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the  
basic system configuration. This type of inform ation is stored in battery-backed CMOS RAM so that it  
retains the Setup information when the power is turned off.  
ENTERING SETUP  
Powering ON the com puter and pressing <Del> immediately will allow you to enter Setup. If you require  
m ore advanced BIOS settings, please go to "Advanced BIOS" setting m enu. To enter  
Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen.  
CONTROL KEYS  
<
>< >< ><  
>
Move to select item  
<Enter>  
<Esc>  
Select Item  
Main M enu - Quit and not save changes into CMOS Status Page Setup Menu  
and Option Page Setup Menu - Exit current page and return to Main M enu  
Increase the numeric value or make changes  
Decrease the num eric value or make changes  
General help, only for Status Page Setup Menu and Option Page Setup M enu  
Item Help  
<+/PgUp>  
<-/PgDn>  
<F1>  
<F2>  
<F5>  
<F6>  
<F7>  
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu  
Load the file-safe default CM OS value from BIOS default table  
Load the Optimized Defaults  
<F8>  
Q-Flash utility  
<F9>  
System Inform ation  
<F10>  
Save all the CMOS changes, only for M ain Menu  
MainMenu  
The on-line description of the highlighted setup function is displayed at the bottom of the screen.  
Status Page Setup Menu / Option Page Setup Menu  
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible  
selections for the highlighted item . To exit the Help Window press <Esc>.  
The Main Menu (For example: BIOS Ver. : F4c)  
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the  
screen. The M ain Menu allows you to select from eight setup functions and two exit choices. Use  
arrow keys to select among the items and press <Enter> to accept or enter the sub-menu.  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI Configurations  
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save & Exit Setup  
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Time, Date, Hard Disk Type...  
- 21 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ifyoucan'tfindthesettingyou want,pleasepress"Ctrl+F1"to searchthe advanced  
optionhidden.  
StandardCMOS Features  
This setup page includes all the item s in standard com patible BIOS.  
AdvancedBIOS Features  
This setup page includes all the items of Award special enhanced features.  
IntegratedPeripherals  
This setup page includes all onboard peripherals.  
PowerManagementSetup  
This setup page includes all the items of Green function features.  
PnP/PCI Configuration  
This setup page includes all the configurations of PCI & PnP ISA resources.  
PC Health Status  
This setup page is the System auto detect Temperature, voltage, fan, speed.  
Frequency/VoltageControl  
This setup page is control CPU clock and frequency ratio.  
LoadFail-Safe Defaults  
Fail-Safe Defaults indicates the value of the system param eters which the system would be in safe  
configuration.  
LoadOptimized Defaults  
Optimized Defaults indicates the value of the system parameters which the system would be in  
best performance configuration.  
Set Supervisor Password  
Change, set, or disable password. It allows you to limit access to the system and Setup, or just  
to Setup.  
Set User Password  
Change, set, or disable password. It allows you to lim it access to the system.  
Save & Exit Setup  
Save CMOS value settings to CM OS and exit setup.  
Exit Without Saving  
Abandon all CMOS value changes and exit setup.  
7VT600-RZ Series Motherboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 22 -  
Standard CMOS Features  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
Standard CMOS Features  
Date (mm:dd:yy)  
Time (hh:mm:ss)  
Fri, Jan 9 2004  
22:31:24  
Item Help  
Menu Level}  
Change the day, month,  
} IDE Primary Master  
} IDE Primary Slave  
} IDE Secondary Master  
} IDE Secondary Slave  
[None]  
[None]  
[None]  
[None]  
year  
<Week>  
Sun. to Sat.  
Drive A  
Drive B  
Floppy 3 Mode Suport  
[1.44M, 3.5"]  
[None]  
[Disabled]  
<Month>  
Jan. to Dec.  
<Day>  
1 to 31 (or maximum  
allowed in the month)  
Holt On  
[All, But Keyboard]  
Base Memory  
Extended Memory  
Total Memory  
640K  
127M  
128M  
<Year>  
1999 to 2098  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
FDate  
The date form at is <week>, <month>, <day>, <year>.  
8Week  
8Month  
8Day  
The week, from Sun to Sat, determined by the BIOS and is display only  
The month, Jan. Through Dec.  
The day, from 1 to 31 (or the maximum allowed in the m onth)  
The year, from 1999 through 2098  
8Year  
FTime  
The tim es format in <hour> <minute> <second>. The time is calculated base on the 24-hour military-  
tim e clock. For example, 1 p.m. is 13:00:00.  
FIDE Primary Master, Slave / Secondary Master, Slave  
The category identifies the types of hard disk from drive C to F that has been installed in the  
computer. There are two types: auto type, and m anual type. Manual type is user-definable; Auto  
type which will automatically detect HDD type.  
Note that the specifications of your drive must match with the drive table. The hard disk will not work  
properly if you enter improper information for this category.  
If you select User Type, related information will be asked to enter to the following items. Enter the  
information directly from the keyboard and press <Enter>. Such information should be provided in  
the documentation form your hard disk vendor or the system m anufacturer.  
8Capacity:  
The hard disk size. The unit is Mega Bytes.  
8Access Mode: The options are: Auto / Large / LBA / Normal.  
8Cylinder:  
8Head  
The cylinder number of hard disk.  
The read / Write head number of hard disk.  
8Precomp  
8Landing Zone  
The cyliner number at which the disk driver changes the write current.  
The cylinder number that the disk driver heads(read/write) are seated when  
the disk drive is parked.  
8SECTORS  
The sector num ber of each track define on the hard disk.  
If a hard disk has not been installed select NONE and press <Enter>.  
- 23 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FDrive A / Drive B  
The category identifies the types of floppy disk drive A or drive B that has been installed in the  
computer.  
8None  
No floppy drive installed  
8360K, 5.25 “.  
81.2M, 5.25 ”.  
5.25 inch PC-type standard drive; 360K byte capacity.  
5.25 inch AT-type high-density drive; 1.2M byte capacity  
(3.5 inch when 3 Mode is Enabled).  
8720K, 3.5 “.  
81.44M, 3.5 “.  
82.88M, 3.5 “.  
3.5 inch double-sided drive; 720K byte capacity  
3.5 inch double-sided drive; 1.44M byte capacity.  
3.5 inch double-sided drive; 2.88M byte capacity.  
FFloppy 3 Mode Support (for Japan Area)  
8Disabled  
8Drive A  
8Drive B  
8Both  
Normal Floppy Drive. (Default value)  
Enabled 3 mode function of Drive A.  
Enabled 3 mode function of Drive B.  
Drive A & B are 3 mode Floppy Drives.  
FHalt on  
The category determines whether the computer will stop if an error is detected during power up.  
8NO Errors  
The system boot will not stop for any error that may be detected  
and you will be prompted.  
8All Errors  
Whenever the BIOS detects a non-fatal error the system will be stopped.  
8All, But Keyboar The system boot will not stop for a keyboard error; it will stop for  
all other errors. (Default value)  
8All, But Diskette The system boot will not stop for a disk error; it will stop for all  
other errors.  
8All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will  
stop for all other errors.  
Memory  
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.  
BaseMemory  
The POST of the BIOS will determ ine the amount of base (or conventional) memory  
installed in the system.  
The value of the base mem ory is typically 512 K for systems with 512 K memory  
installed on the m otherboard, or 640 K for systems with 640 K or more memory  
installed on the motherboard.  
ExtendedMemory  
The BIOS determines how much extended memory is present during the POST.  
This is the amount of memory located above 1 M B in the CPU memory address  
map.  
7VT600-RZ Series Motherboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 24 -  
Advanced BIOS Features  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
Advanced BIOS Features  
Item Help  
Menu Level}  
Select Boot Device  
First Boot Device  
Second Boot Device  
Third Boot Device  
[Floppy]  
[HDD-0]  
[CDROM]  
priority  
Password Check  
[Setup]  
[Floppy]  
Boot from floppy  
[LS120]  
Boot from LS120  
[HDD-0]  
Boot from First HDD  
[HDD-1]  
Boot from Second HDD  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
FFirst / Second / Third Boot device  
M This feature allows you to select the boot device priority.  
8Floppy  
8LS120  
8HDD-0~3  
8SCSI  
8CDROM  
8LAN  
8USB-CDROM  
8USB-ZIP  
8USB-FDD  
8USB-HDD  
8ZIP  
Select your boot device priority by Floppy.  
Select your boot device priority by LS120.  
Select your boot device priority by HDD-0~3.  
Select your boot device priority by SCSI.  
Select your boot device priority by CDROM.  
Select your boot device priority by LAN.  
Select your boot device priority by USB-CDROM.  
Select your boot device priority by USB-ZIP.  
Select your boot device priority by USB-FDD.  
Select your boot device priority by USB-HDD.  
Select your boot device priority by ZIP.  
8Disabled  
Disabled this function.  
F PasswordCheck  
8System  
The system can not boot and can not access to Setup page will be denied  
if the correct password is not entered at the prompt.  
8Setup  
The system will boot, but access to Setup will be denied if the correct  
password is not entered at the prom pt. (Default value)  
- 25 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Integrated Peripherals  
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software  
Integrated Peripherals  
[Enabled]  
OnChip IDE Channel0  
Item Help  
OnChip IDE Channel1  
AC97 Audio  
[Enabled]  
[Auto]  
Menu Level u  
VIA Onboard LAN *  
USB 1.1 Controller  
USB 2.0 Controller  
USB Keyboard Support  
USB Mouse Support  
VIA LAN Boot ROM *  
Onboard Serial Port 1  
Onboard Serial Port 2  
Onboard Parallel Port  
UART Mode Select  
[Enabled]  
[Enabled]  
[Enabled]  
[Disabled]  
[Disabled]  
[Disabled]  
[3F8/IRQ4]  
[2F8/IRQ3]  
[378/IRQ7]  
[Normal]  
[SPP]  
Parallel Port Mode  
Game Port Address  
Midi Port Address  
Midi Port IRQ  
[201]  
[330]  
10  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
F OnChip IDE Channel0  
MWhen enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is  
used, set at Disabled.  
8Enabled  
8Disabled  
Enable onboard 1st channel IDE port. (Default value)  
Disable onboard 1st channel IDE port.  
F OnChip IDE Channel1  
MWhen enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card  
is used, set at Disabled.  
8Enabled  
8Disabled  
Enable onboard 2nd channel IDE port. (Default value)  
Disable onboard 2nd channel IDE port.  
F AC97 Audio  
8Enabled  
BIOS will automatically detect onboard AC97 Audio. (Default value)  
Disabled AC97 Audio.  
8Disabled  
F VIA Onboard LAN *  
8Enabled  
8Disabled  
Enable VIA Onboard LAN function. (Default value)  
Disable this function.  
F USB 1.1 Controller  
MDisable this option if you are not using the onboard USB feature.  
8Enabled  
Enabled USB Controller. (Default value)  
8Disabled  
Disabled USB Controller.  
F USB 2.0 Controller  
MDisable this option if you are not using the onboard USB 2.0 feature.  
8Enabled  
Enabled USB 2.0 Controller. (Default value)  
8Disabled  
Disabled USB 2.0 Controller.  
" * " For 7VT600-RZ-C only.  
7VT600-RZ Series Motherboard  
- 26 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F USB Keyboard Support  
MWhen a USB keyboard is installed, please set at Enabled.  
8Enabled  
Enabled USB Keyboard Support.  
8Disabled  
Disabled USB Keyboard Support. (Default value)  
F USB Mouse Support  
8Enabled  
Enabled USB M ouse Support.  
8Disabled  
Disabled USB Mouse Support. (Default value)  
F VIA LAN Boot ROM *  
This function decide whether to invoke the boot ROM of the onboard LAN chip.  
8Disabled  
8Enabled  
Disable this function. (Default Value)  
Enable this function.  
F Onboard Serial Port 1  
8Auto  
BIOS will autom atically setup the port 1 address.  
83F8/IRQ4  
82F8/IRQ3  
83E8/IRQ4  
82E8/IRQ3  
8Disabled  
Enable onboard Serial port 1 and address is 3F8,Using IRQ4. (Default value)  
Enable onboard Serial port 1 and address is 2F8,Using IRQ3.  
Enable onboard Serial port 1 and address is 3E8,Using IRQ4.  
Enable onboard Serial port 1 and address is 2E8,Using IRQ3.  
Disable onboard Serial port 1.  
F Onboard Serial Port 2  
8Auto  
BIOS will autom atically setup the port 2 address.  
83F8/IRQ4  
82F8/IRQ3  
Enable onboard Serial port 2 and address is 3F8,Using IRQ4.  
Enable onboard Serial port 2 and address is 2F8,Using IRQ3. (Default Value)  
83E8/IRQ4  
82E8/IRQ3  
8Disabled  
Enable onboard Serial port 2 and address is 3E8,Using IRQ4.  
Enable onboard Serial port 2 and address is 2E8,Using IRQ3.  
Disable onboard Serial port 2.  
F OnBoard Parallel port  
MThis feature allows you to select from a given set of param eters if the parallel port uses the  
onboard I/O controller.  
8378/IRQ7  
8278/IRQ5  
83BC/IRQ7  
8Disabled  
Enable onboard LPT port and address is 378, Using IRQ7.(Default Value)  
Enable onboard LPT port and address is 278,Using IRQ5.  
Enable onboard LPT port and address is 3BC,Using IRQ7.  
Disable onboard parallel port.  
F UART Mode Select  
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.  
Normal  
IrDA  
Set onboard I/O chip UART to Normal Mode. (Default Value)  
Set onboard I/O chip UART to IrDA M ode.  
ASKIR  
SCR  
Set onboard I/O chip UART to ASKIR Mode.  
Set onboard I/O chip as Smart Card interface.  
" * " For 7VT600-RZ-C only.  
- 27 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F Parallel Port Mode  
MThis feature allows you to connect with an advanced print via the port mode it supports.  
8SPP  
8EPP  
8ECP  
8ECP+EPP  
Using Parallel port as Standard Parallel Port using IRQ7. (Default Value)  
Using Parallel port as Enhanced Parallel Port IRQ5.  
Using Parallel port as Extended Capabilities Port using IRQ7.  
Using Parallel port as ECP & EPP mode.  
F Game Port Address  
8Disabled  
Disabled this function.  
8201  
8209  
Set Gam e PortAddress to 201. (Default Value)  
Set Game Port Address to 209.  
F Midi Port Address  
8Disabled  
Disabled this function. (Default Value)  
8300  
8330  
Set Midi Port Address to 300.  
Set Midi Port Address to 330.  
F Midi Port IRQ  
85  
Set 5 for M idi Port IRQ.  
810  
Set 10 for Midi Port IRQ.(Default value)  
Power Management Setup  
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software  
Power Management Setup  
[S1(POS)]  
ACPI Suspend Type  
Item Help  
x USB Device Wake-Up From S3  
Power LED in S1 state  
Soft-Off by PWRBTN  
AC Back Function  
Disabled  
Menu Level u  
[S1]  
[Blinking]  
[Instant-off]  
[Soft-Off]  
[Disabled]  
[Disabled]  
[Enabled]  
[Enabled]  
[Disabled]  
Everyday  
Set suspend type to  
Power On Suspend under  
ACPI OS  
Keyboard Power On  
Mouse Power On  
[S3]  
PME Event Wake Up  
Set suspend type to  
Suspend to RAM under  
ACPI OS  
ModemRingOn/WakeOnLAN  
Resume by Alarm  
x Date (of Month) Alarm  
x Time (hh:mm:ss) Alarm  
0 : 0 : 0  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
7VT600-RZ Series Motherboard  
- 28 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F ACPI Suspend Type  
8S1(POS)  
Set suspend type to Power On Suspend under ACPI OS(Power On  
Suspend). (Default value)  
8S3(STR)  
Set suspend type to Suspend To RAM under ACPI OS (Suspend To RAM).  
F USB Device Wakeup From S3(When ACPI Suspend Type is set [S3(STR)])  
USB device wakeup From S3 can be set when ACPI standby state set to S3/STR.  
8Enabled  
8Disabled  
USB Device can wakeup system from S3.  
USB Device can’t wakeup system from S3. (Default value)  
F Power LED in S1 state  
8Blinking  
8Dual/Off  
In standby m ode(S1), power LED will blink. (Default value)  
In standby m ode(S1):  
a. If use single color LED, power LED will turn off.  
b. If use dual color LED, power LED will turn to another color.  
F Soft-off by PWRBTN  
8Instant-off  
8Delay 4 Sec.  
Press power button then Power off instantly. (Default value)  
Press power button 4 sec to Power off. Enter suspend if button is pressed  
less than 4 sec.  
F ACBack Function  
8Memory  
8Soft-Off  
8Full-On  
System power on depends on the status before AC lost.  
Always in Off state when AC back. (Default value)  
Always power on the system when AC back.  
F Keyboard Power On  
This feature allows you to set the m ethod for powering-on the system.  
The option "Password" allows you to set up to 8 alphanum eric characters to power-on the system.  
The option "Keyboard 98" allows you to use the standard keyboard 98 to power on the system.  
8Password  
Enter from 1 to 8 characters to set the Keyboard Power On Password.  
8Disabled  
Disabled this function. (Default value)  
8Keyboard 98  
If your keyboard have "POWER Key" button, you can press the key to  
power on your system .  
F Mouse Power On  
8Disabled  
Can't Power on system by Mouse Event. (Default value)  
Can Power on system by M ouse Event.  
8Enabled  
F PME Event Wake up  
When set at Enabled, any PCI-PM event awakes the system from a PCI-PM controlled state.  
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.  
8Disabled  
Disabled PM E Event Wake up function.  
8Enabled  
Enabled PME Event Wake up function. (Default Value)  
- 29 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F ModemRingOn/WakeOnLAN (When AC Back Function set to [Soft-Off])  
You can enable wake on LAN feature by the "ModemRingOn/WakeOnLAN" or "PME Event Wake  
up" when the M /B has "WOL" onboard connector. Only enabled the feature by "PME Event Wake  
up". An incoming call via modem awakes the system from its soft-off m ode. When set at Enabled,  
an input signal comes from the other client.  
Server on the LAN awaks the system from a soft off state if connected over LAN.  
8Disabled  
Disabled Modem Ring On / Wake On LAN function.  
8Enabled  
Enabled Modem Ring On / Wake On LAN function. (Default Value)  
F Resumeby Alarm  
You can set "Resume by Alarm" item to enabled and key in Data/time to power on system.  
8Disabled  
8Enabled  
Disable this function. (Default Value)  
Enable alarm function to POWER ON system.  
If RTC Alarm Lead To Power On is Enabled.  
Date (of Month) Alarm :  
Everyday, 1~31  
Time (hh: m m: ss) Alarm : (0~23) : (0~59) : (0~59)  
PnP/PCI Configurations  
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software  
PnP/PCI Configurations  
PCI1/PCI5 IRQ Assignment  
[Auto]  
[Auto]  
[Auto]  
Item Help  
PCI2 IRQ Assignment  
PCI3 IRQ Assignment  
Menu Levelu  
PCI4 IRQ Assignment  
[Auto]  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
7VT600-RZ Series Motherboard  
- 30 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F PCI1/PCI5 IRQ Assignment  
8Auto  
Auto assign IRQ to PCI 1/ PCI 5. (Default value)  
Set 3,4,5,7,9,10,11,12,14,15 to PCI1/ PCI5.  
83,4,5,7,9.,10,11,12,14,15  
F PCI2 IRQ Assignment  
8Auto  
Auto assign IRQ to PCI 2. (Default value)  
Set 3,4,5,7,9,10,11,12,14,15 to PCI2.  
83,4,5,7,9.,10,11,12,14,15  
F PCI3 IRQ Assignment  
8Auto  
Auto assign IRQ to PCI 3. (Default value)  
Set 3,4,5,7,9,10,11,12,14,15 to PCI3.  
83,4,5,7,9.,10,11,12,14,15  
F PCI4 IRQ Assignment  
8Auto  
Auto assign IRQ to PCI 4. (Default value)  
Set 3,4,5,7,9,10,11,12,14,15 to PCI4.  
83,4,5,7,9.,10,11,12,14,15  
PCI Health Status  
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software  
PC Health Status  
Reset Case Open Status  
Case Opened  
[Disabled]  
Item Help  
No  
Menu Level u  
Vcore  
1.810V  
1.248V  
3.280V  
4.919V  
11.968V  
5.053V  
27oC  
DDR Vtt  
[Disabled]  
+3.3V  
Don't reset case  
open status  
+5V  
+12V  
5VSB  
[Enabled]  
Current System Temperature  
Current CPU Temperature  
Current CPU FAN Speed  
Current SYSTEM FAN Speed  
CPU FAN Fail Warning  
SYSTEM FAN Fail Warning  
Clear case open  
status at next boot  
37oC  
4687 RPM  
0
RPM  
[Disabled]  
[Disabled]  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
- 31 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
F Reset CaseOpen Status  
F CaseOpened  
If the case is closed, "Case Opened" will show "No".  
If the case have been opened, "Case Opened" will show "Yes".  
If you want to reset "Case Opened" value, set "Reset Case Open Status" to "Enabled" and save  
CM OS, your computer will restart.  
F Current Voltage (V) Vcore / DDR Vtt / +3.3V/ +5V / +12V / 5VSB  
Detect system 's voltage status autom atically.  
F CurrentSystem Temperature(°C)  
Detect System Tem p. automatically.  
F Current CPU Temperature (°C)  
Detect CPU Temp. autom atically.  
F Current CPU FAN / SYSTEM FAN Speed (RPM)  
Detect Fan speed status automatically.  
F Fan Fail Warning (CPU / SYSTEM)  
8Disabled  
8Enabled  
Don't m onitor current fan speed. (Default value)  
Alarm when stops.  
Frequency/Voltage Control  
CMOS Setup Utility-Copyright (C) 1984-2003 Award Software  
Frequency/Voltage Control  
Spread Spectrum Modulated  
CPU Host Clock Control  
øCPU Host Frequency(MHz)  
øPCI/AGP Frequency(MHz)  
[Enabled]  
Item Help  
[Disable]  
133  
33/66  
Menu Level u  
DRAM Clock(MHz)  
CPU OverVoltage Control  
[Auto]  
[Auto]  
AGP OverVoltage Control  
DIMM OverVoltage Control  
[Auto]  
[Auto]  
higf: Move Enter: Select  
F5: Previous Values  
+/-/PU/PD: Value F10: Save  
F6: Fail-Save Default  
ESC: Exit F1: General Help  
F7: Optimized Defaults  
øThose items will be available when "CPU Host Clock Control" is set to Enabled.  
7VT600-RZ Series Motherboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 32 -  
FSpreadSpectrum Modulated  
8Disabled  
8Enabled  
Disable clock spread spectrum.  
Enable clock spread spectrum.(Default value)  
FCPU Host Clock Control  
Note: If system hangs up before enter CMOS setup utility, wait for 20 sec for times out reboot . When  
tim e out occur, system will reset and run at CPU default Host clock at next boot.  
8Disable  
Disable CPU Host Clock Control.(Default value)  
8Enable  
Enable CPU Host Clock Control.  
FCPU Host Frequency (MHz) (By switch SW1)  
8100  
8133  
8166  
8200  
Set CPU Host Clock to 100MHz~132M Hz.  
Set CPU Host Clock to 133MHz~165M Hz.  
Set CPU Host Clock to 166MHz~200M Hz.  
Set CPU Host Clock to 200MHz~254M Hz.  
FPCI/AGP Frequency(MHz)  
8The values depend on CPU Host Frequency(Mhz) .  
FDRAM Clock (MHz)  
8Please set DRAM Clock according to your requirement. (Default value: Auto)  
If you use DDR266 DRAM module, please set "DRAM Clock(MHz)" to "133-DDR266". If you use  
DDR333 DRAM module, please set "DRAM Clock(MHz)" to "166-DDR333". If you use DDR400  
DRAM module, please set "DRAM Clock(MHz)" to "200-DDR400".  
Incorrect using it may cause your system broken. For power End-User use only!  
FCPU OverVoltage Control  
Increase CPU voltage m ay get stable for Over_Clock. But it may damage to CPU when enable this  
feature.  
8Auto  
Supply voltage as CPU reguired. (Default value)  
8+5% / +7.5% / +10% Increase voltage range as user selected.  
FAGP OverVoltage Control  
Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when enable this  
feature.  
8Auto  
8+0.1V ~ +0.3V  
Supply voltage as AGP Card reguired. (Default value)  
Set AGP voltage from 1.6V~1.8V.  
FDIMM OverVoltage Control  
Increase DRAM voltage may get stable for Over_Clock. But it may dam age to DRAM m odule when  
enable this feature.  
8Auto  
8+0.1V ~ +0.3V  
Supply voltage as DRAM module reguired. (Default value)  
Set DIMM voltage from 2.6V~2.8V.  
- 33 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Load Fail-Safe Defaults  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
PnP/PCI Load Fail-Safe Defaults(Y/N)?N
PC Health Status  
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Load Fail-Safe Defaults  
Fail-Safe defaults contain the m ost appropriate values of the system parameters that allow minim um  
system performance.  
Load Optimized Defaults  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI
PC Health S
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Load Optimized Defaults (Y/N)? N  
iii
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Load Optimized Defaults  
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system autom atically  
detects.  
7VT600-RZ Series Motherboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 34 -  
Set Supervisor/User Password  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI Enter Password:  
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Change/Set/Disable Password  
When you select this function, the following message will appear at the center ofthe screen to assist you  
in creating a password.  
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the  
password. Type the password again and press <Enter>. You may also press <Esc> to abort the  
selection and not enter a password.  
To disable password, just press <Enter> when you are prompted to enter password. A m essage  
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is  
disabled, the system will boot and you can enter Setup freely.  
The BIOS Setup program allows you to specify two separate passwords:  
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS  
Setup program function. When enabled, the Supervisor password is required for entering the BIOS  
Setup program and having full configuration fields, the User password is required to access only basic  
items.  
If you select "System " at "Password Check" in Advance BIOS Features Menu, you will be prom pted  
for the password every time the system is rebooted or any tim e you try to enter Setup M enu.  
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted only  
when you try to enter Setup.  
- 35 -  
BIOS Setup  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Save & Exit Setup  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Save to CMOS and EXIT(Y/N)?Y
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Save Data to CMOS  
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.  
Type "N" will return to Setup Utility.  
Exit Without Saving  
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software  
}
}
}
}
}
}
}
Standard CMOS Features  
Advanced BIOS Features  
Integrated Peripherals  
Power Management Setup  
PnP/PCI
PC Health Status  
Load Fail-Safe Defaults  
Load Optimized Defaults  
Set Supervisor Password  
Set User Password  
Quit Without Saving (Y/N)? N
Exit Without Saving  
Frequency/Voltage Control  
ESC: Quit  
higf: Select Item  
F8: Q-Flash  
F10: Save & Exit Setup  
Abandon all Data  
Type "Y" will quit the Setup Utility without saving to RTC CM OS.  
Type "N" will return to Setup Utility.  
7VT600-RZ Series Motherboard  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 36 -  
Chapter 3 Install Drivers  
Install Drivers  
Picture below are shown inWindows XP  
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the  
driver CD-title will auto start and show the installation guide. If not, please double click the  
CD-ROM device icon in "My com puter", and execute the setup.exe.  
INSTALL CHIPSET DRIVER  
This page shows the drivers that need to be installed for the system. Click each item to install the driver  
manually or switch to the  
to install the drivers automatically.  
The "Xpress Install" uses the"Click and GO" technology to install the drivers automatically. Just select the  
drivers you want then click the "GO" button. The  
will finish the installation for you automatically.  
Massage: Some device drivers will restart  
your system automatically. After restarting  
your system the "Xpress Install" will  
continue to install other drivers.  
We recommend that you install all com ponents in the list.  
- 37 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Driver Installation  
Driver install finished !  
You have to reboot system !  
Item Description  
n
n
n
n
n
VIA 4IN1 Driver  
For INF, AGP, IDE and DM A Driver  
USB Path for WinXP  
This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP  
VIA Lan Driver *  
VIA 10/100 LAN driver for VT6103L chips  
RealTek AC97 Audio Driver  
Audio driver for Realtek AC97 codec chipset  
VIA USB 2.0 Controller  
USB 2.0 Driver information for XP  
For USB2.0 driver support under Windows XP operating system, please use Windows  
Service Pack. After install Windows Service Pack, it will show a question mark "?" in  
"Universal Serial Bus controller" under "Device Manager". Please remove the question mark  
and restart the system (System will auto-detect the right USB2.0 driver).  
" * " For 7VT600-RZ-C Only.  
7VT600-RZ Series Motherboard  
- 38 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
- 39 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Driver Installation  
CONTACT US  
Contactus via the information in this page all over the world.  
Taiwan  
The Netherlands  
Gigabyte TechnologyCo., Ltd.  
Address:No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,  
Taiwan,R.O.C.  
Giga-ByteTechnologyB.V.  
Address:Verdunplein8 5627 SZ,Eindhoven,The Netherlands  
Tel:+3140 2902088  
Tel:886 (2)8912-4888  
Fax:886(2)8912-4004  
Tech.Support:  
NLTech.Support:0900-GIGABYTE(0900-44422983, 0.2/M)  
BETech.Support:0900-84034 ( 0.4/M)  
Fax:+31 40 290 2089  
Non-Tech.Support(Sales/Marketingissues):  
Tech.Support:  
Non-Tech.Support(Sales/Marketingissues):  
China  
USA  
G.B.T.INC.  
Address:17358 Railroad St, CityofIndustry, CA91748.  
Tel:1(626)854-9338  
NINGBOG.B.T. Tech.Trading CO., Ltd.  
Tech.Support:  
Fax:1(626)854-9339  
Tech.Support:  
http://cn.giga-byte.com/TechSupport/ServiceCenter.htm  
Non-Tech.Support(Sales/Marketingissues):  
Beijing  
Non-Tech.Support(Sales/Marketingissues):  
Germany  
Tel:86-10-82856054,86-10-82856064,86-10-82856094  
Fax:86-10-82856575  
G.B.T.TechnologyTradingGmbH  
Tel:49-40-2533040  
Chengdu  
Tel:86-28-85236930  
49-01803-428468 (Tech.)  
Fax:86-28-85256822  
Fax:49-40-25492343(Sales)  
49-01803-428329 (Tech.)  
GuangZhou  
Tel:86-20-87586273  
Tech.Support:  
Fax:86-20-87544306  
http://de.giga-byte.com/TechSupport/ServiceCenter.htm  
Non-Tech.Support(Sales/Marketingissues):  
Shanghai  
Tel:86-21-64737410  
Fax:86-21-64453227  
Shenyang  
Japan  
Tel:86-24-23960918,86-24-23960893  
Wuhan  
NipponGiga-ByteCorporation  
Tel:86-27-87854385,86-27-87854802  
Fax:86-27-87854031  
Xian  
Tel:86-29-5531943  
Fax:86-29-5539821  
U.K  
G.B.T. TECH.CO. LTD.  
Tel:44-1908-362700  
Fax:44-1908-362709  
Tech.Support:  
Non-Tech.Support(Sales/Marketingissues):  
7VT600-RZ Series Motherboard  
- 40 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Everex Laptop VA4100M User Manual
Everpure Water System CG53 10 User Manual
Exakta Digital Camera Varex VX User Manual
Exmark Lawn Mower Diesel User Manual
Fisher Price Baby Toy C6326 User Manual
Fisher Price Baby Walker B9639 User Manual
Frigidaire Refrigerator FSC23R5DB0 User Manual
Gefen Switch EXT TV MFS User Manual
GE Microwave Oven 350A4502P592 02 07 ATS User Manual
GE Microwave Oven JES1133WD User Manual