24958
Universal Remote
Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations.on.your.purchase.of.this.
24958.Universal.Remote.Control..The.
24958.is.one.of.the.most.easy.to.use.
remote.controls.available.today..With.the.
24958,.juggling.multiple.remote.controls.is.
a.thing.of.the.past!.Your.24958.controls.up.
to.6.devices,.including.the.most.popular.
brands.of.TV,.DVD,.DVR,.Cable,.etc..
.
In.addition,.this.remote.is.equipped.with.a.
command.learning.feature,.which.lets.the.
remote.learn.commands.from.your.original.
equipment.remote.control!
Note:.Some.functions.from.your.original.
remote.may.not.be.controlled.by.this.
remote..Use.the.original.remote,.if.
available,.to.control.such.functions..
Sometimes.buttons.other.than.described.
in.these.instructions.may.actually.perform.
the.function..For.example,.the.CHAN.and.
VOL.buttons.might.be.used.to.navigate.
through.menu.choices..We.recommend.
you.experiment.with.the.remote.to.
identify.if.such.situations.pertain.to.your.
equipment..
The.24958.is.easy.to.use,.easy.to.
program,.and.it.gives.you.total.control—at.
the.touch.of.your.fingertips!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
1.
27.
26.
25.
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
Note:.The.REC.button.must.be.pressed.twice.to.
record.from.your.DVD/DVR..For.some.DVD/DVR.
brands,.you.might.need.to.press.REC button.once,.
then.press.it.again.for.3.seconds.
Some.buttons.on.the.remote.might.have.functions.
that.are.referred.to.by.different.names.on.the.de-
vice.you.are.controlling..These.differences.depend.
upon.the.brand.and.model.of.your.product..Also,.
this.remote.can.only.operate.features.that.exist.on.
your.product..
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions (cont.)
1. Red Indicator:.Lights.when.any.button.is.pressed.
2. TV, DVD, DVR, etc.: Selects.the.product.to.be.oper-
ated.
3. SETUP: Used.for.setting.up.your.remote.
4. ABCD: Used.to.store.learned.commands.
5. MENU: Brings.up.the.device.Menu.screen.(if.
available).-.use.with.UP,.DOWN,.LEFT,.and.RIGHT
navigation.buttons.
6. UP, DOWN, LEFT, RIGHT: Navigation.buttons.
7. INFO: Displays/selects.on-screen.channel.informa-
tion,.etc.
8. ZOOM: Zooms.or.enlarges.a.specific.area.of.the.
screen..
9. VOLUME UP/DOWN: Changes.the.volume.level.of.
the.product,.normally.the.TV.
10. REPLAY: Replays.the.last.8.seconds.of.a.program.
11. INPUT: For.some.TVs,.press.repeatedly.to.select.
from.available.viewing.sources.(antenna,.cable.box,.
etc.).
12. PAGE UP/DOWN:.Sets.your.Favorites.ratings.(YES/
NO).
13. NUMBERS:.Enter.numbers.for.direct.channel.selec-
tion..Some.products.require.Enter.to.be.pressed.
after.channel.selection.
14. ENTER: Used.after.direct.channel.number.entry.to..
immediately.change.to.the.selected.channel.
15. RECORD, PLAY, STOP, REW, FF, PAUSE:..Control.
buttons.that.operate.your.DVD/DVR.even.when.the.
remote.is.set.to.operate.the.TV..Also.operates.DVD.
Scan.-/+.
16. Dot:.used.for.digital.channels,.e.g.,.2.3.
17. LAST: Returns.to.the.previously.selected.channel.or.
DVD.repeat.toggle.
18. LIVE: Returns.to.live.TV.
19. MUTE:.Turns.off.the.TV.sound.while.the.picture.
remains.
20. CHANNEL UP/DOWN:.Changes.the.channels..Also.
controls.DVD/CD.CHAPTER.+/-.track.selection,.
i.e.,.DVD/CD.Track.Skip.Up/Down..Note.the.DVR
buttons.also.control.the.DVD.when.in.DVD.Mode.
21. BACKLIGHT: Turns.backlighting.On/Off.
22. DVR LIST:.Press.to.display.list.of.recorded.shows.
on.your.DVR.
23. GUIDE: Displays.satellite.or.cable.on-screen.pro-
gram.guide.
24. OK: Selects.menu.items.for.the.device.you.are.con-
trolling..
25. EXIT: Exits.on-screen.menus,.returns.to.previous.
on-screen.selection.
26. LEARN: Used.to.setup.learning.functions.
27. POWER: Turns.device.on.or.off.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial Setup
Battery Installation
1.. On.the.back.of.the.remote,.push.down.on.the.
tab.and.lift.the.cover.off.
2.. Match.the.batteries.to.the.+.and.-.marks.inside.
the.battery.case,.then.insert.2.AAA.Alkaline.
batteries.
3.. Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.
are.depressed.more.than.30.seconds..This.will.
save.your.batteries.should.your.remote.get.stuck.in.
a.place.where.the.buttons.remain.depressed.(e.g.,.
or.for.instance,.between.the.sofa.cushions).
Code Saver
Codes.are.stored.in.permanent.memory.while.you.
are.changing.batteries.so.that.you.will.not.lose.any.
codes.stored.in.the.remote.while.you.are.changing.
batteries..
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..
You.can.either.setup.the.remote.using.the.code.
for.your.brand.of.product,.from.the.code.tables.(on.
separate.sheet),.or.you.can.search.through.the.
library.of.codes.until.you.find.a.code.that.works.for.
your.product.
Please.refer.to.“Code.Search”.on.page.8.for.more.
information.on.using.the.code.search.feature.to.
learn.how.to.search.through.the.library.of.codes.for.
your.products.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct Code Entry
Direct Code Entry
NOTE:.You.can.store.any.kind.of.code.under.any.
mode.(except.TV)..I.E..you.can.store.a.VCR.code.
under.the.CBL button,.or.a.DVD.code.under.the.
AUX button,.etc..However,.you.can.only.store.TV.
codes.under.the.TV button.
1....Press.and.hold.the.SETUP button.until.the.red.
indicator.stays.on,.then.release.the SETUP
button.
2....Press.and.release.the.desired.mode.button.
(TV, DVD,.etc.)..The.red.indicator.blinks,.then.
stays.lit...
3.. Enter.the.4.digit.code.from.the.code.tables.(on.
separate.sheet)..Note:.after.a.valid.code.entry,.
the.red.indicator.turns.off...For.an.invalid.code,.
the.red.indicator.flashes.
4.. With.your.device.on,.press CHANNEL UP (or
POWER)..If.the.device.responds,.no.further.
programming.is.required..Note:.If.some.buttons.
do.not.operate.your.equipment,.try.one.of.the.
other.codes.for.your.brand.
Write.your.codes.down.here.for.easy.reference.
later.
Type
TV
Type stored
TV
Code
DVD
DVR
CBL
AMP
AUX
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Search
Code Search
If.your.product.does.not.respond.after.you.have.
tried.all.the.codes.for.your.brand,.or.if.your.brand.is.
not.listed,.try.searching.for.your.code.by.following.
these.steps.
1.. Manually.turn.on.the.device.(TV,.DVD,.etc.).to.
be.controlled.
2.. Press.and.hold.the.SETUP button.until.the.red.
indicator.stays.on,.then.release.the.SETUP
button.
3...Press.and.quickly.release.the.desired.mode.
button.(TV,.DVD,.etc.)..The.red.indicator.blinks.
off.once.
4.. Press.the.CHANNEL UP.button.repeatedly.(up.
to.300.times).until.the.device.to.be.controlled.
changes.channel..The.red.indicator.blinks.off.
with.each.button.press..If.you.accidentally.
overshoot.the.code.required,.press.the.
CHANNEL DOWN button.to.backtrack.through.
the.library.until.the.device.changes.channel..
Pressing.CHANNEL UP.changes.direction.to.
forward.again..
5.. Press.and.release.ENTER to.install.the.code..
.
Most.users.store.DVD.codes.under.DVD..Cable.
codes.appear.under.CBL,.etc..If.you.want.to.store.
a.Satellite.code.under.CBL,.for.example,.first.fol-
low.the.procedure.for.Direct.Code.Entry.and.select.
CBL in.Step.2.of.Direct.Code.Entry..Then.enter.
any.Satellite.code.in.Step.3.of.Direct.Code.Entry..
Then.follow.the.steps.above.for.Code.Search..
Note:..Code.Search.starts.from.the.currently.
stored.4.digit.number.under.that.mode..Sometimes.
the.first.code.that.“works”.with.your.device.may.
only.allow.limited.functionality.(e.g..the.MENU
button.might.not.work)..There.may.be.a.code.
that.performs.more.functions..Continue.the.code.
search.process.until.the.best.code.is.found.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Identification Feature
Code Identification Feature
The.Code.Identification.Feature.allows.you.to.
identify.the.4.digit.library.code.stored.under.your.
device.key..For.example,.if.you.want.to.find.out.
what.4.digit.code.is.stored.under.your.TV.device.
key,.follow.the.six.steps.below:
1.. Press.and.hold.the.SETUP button.until.the.red.
indicator.stays.on..Release.the SETUP button.
2.. Press.and.release.the.desired.mode.button.
(TV,.DVD,.etc.)..The.red.indicator.blinks,.then.
stays.lit...
3.. Press.and.release.the.SETUP button..The.red.
indicator.blinks.off.
4.. To.find.the.first.digit.for.the.code.stored.under.
the.mode.key.pressed.in.step.2,.press.each.
numeric.key.from.0-9.in.turn..When.the.red.
indicator.blinks.off.the.number.you.pressed.is.
the.first.digit.for.the.code.you.are.searching.for.
5.. To.find.the.second.digit,.repeat.step.4,.this.
time.when.the.red.indicator.blinks.off.this.is.the.
second.digit.
6.. Repeat.step.4.to.find.the.third.and.fourth.digits.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Programming Combo Device Codes
Some.combo.(combination).devices.(TV/DVR,.TV/
DVD,.DVD/DVR,.etc.).require.you.to.set.up.2.dif-
ferent.modes.to.control.both.parts.of.the.combo..
For.example,.if.you.have.a.TV/DVD.combo,.you.
might.need.to.set.up.one.code.under.the.TV mode.
to.control.the.TV.and.a.separate.code.(under.other.
modes).to.control.the.DVD..
DVD/DVR Punch-Through Feature
This.remote.allows.the.6.DVD/VCR.transport.
buttons.(i.e..PLAY,.PAUSE,.STOP,.FF,.REWIND,.
and.REC).to.Punch-through.from.any.Mode.
programmed.with.TV,.SAT.or.Cable.codes.to.the.
last.DVD,.or.VCR.programmed.Mode.you.used,.
i.e.,.the.transport.keys.control.your.DVD.or.VCR.
player.even.when.you.are.in.TV,.SAT.or.Cable.
mode..If.you.use.a.SAT/DVR,.Cable/DVR,.etc.,.you.
may.want.to.disable.this.Punch-through.feature.
to.allow.the.transport.keys.to.control.your.DVR.
device..The.following.steps.will.disable.the.punch-
through.feature:.
1.. Press.and.hold.SETUP until.the.red.indicator.
stays.on,.then.release.the.SETUP button..
2.. Press.and.hold.PAUSE until.the.red.indicator.
turns.off,.then.release.the.PAUSE button..The.
PAUSE button.needs.held.for.about.3.seconds.
before.the.red.indicator.turns.off..
The.punch-through.feature.can.be.enabled.again.
by.repeating.the.above.steps.
Volume/Mute Control and Punch-
Through Feature
Your.remote.allows.you.to.select.which.device.
mode.controls.VOLUME.and.MUTE..This.remote.
is.initially.set.for.all.device.modes.to.use.their.own.
Volume/Mute.control.if.present..
If.the.programmed.code.does.not.have.Volume/
Mute.operation,.then.VOLUME.and.MUTE will.
“punch-through”.(hand-over).control.to.the.TV-
mode.device.without.you.needing.to.change.to TV.
mode..Note: Any.mode.chosen.for.Volume/Mute.
control.must have.its.own.Volume/Mute.function.or.
else.VOLUME and.MUTE will.not.function.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup (cont.)
Setting ALL Volume/Mute Controls to
Any Mode
You.can.set.all.modes.to.“punch-through”.to.any.
mode.for.Volume/Mute.control.without.needing.to.
change.to.that.mode.by.doing.the.following.
1...Press.and.hold.SETUP until.the.indicator.
remains.on,.then.release.SETUP.
2...Press.and.hold.MUTE.until.the.indicator.blinks.
off,.then.release.the.button.
3...Press.and.release.SELECT to.select.the.
desired.mode.(TV,.DVD,.etc.).for.Volume/Mute.
control;.the.indicator.blinks,.then.stays.on.
4...Press.and.release.MUTE;.the.indicator.turns.
off..Note: The.indicator.will.blink.rapidly.for.3.
seconds.if.the.mode.you.have.selected.does.
not.have.Volume/Mute.control..
5...All.other.modes.will.now.“punch-through”.to.
your.chosen.mode.for.Volume/Mute.control.
Setting Any Mode to Use its Own
Volume/Mute Control
You.can.set.any.mode.to.use.only.its.own.Volume/
Mute.control..
Note:.If.your.chosen.mode.does.not.have.Volume/
Mute.functions,.then.this.remote’s.VOLUME and.
MUTE.will.not.operate.
1...Press.and.hold.SETUP until.the.indicator.
remains.on,.then.release.SETUP.
2...Press.and.hold.MUTE.until.the.indicator.blinks.
off,.then.release.the.button.
3...Press.and.release.SELECT to.select.the.
desired.mode.(TV,.DVD,.etc.);.the.indicator.
blinks,.then.stays.on.
4...Press.and.release.VOLUME-.(down);.the.
indicator.blinks,.then.stays.on.
5...Press.and.release.MUTE;.the.indicator.turns.
off..
6...All.modes.will.now.“punch-through”.to.the.
respective.modes.you.have.chosen.for.Volume/
Mute control.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Learning
commands.
g. Place.the.original.remote.end-to-end.with.the.
Learning.Remote.so.the.IR.transmitters.on.both.
remotes.are.directly.in.line.with.each.other..You.
may.need.to.adjust.the.height.of.either.remote.
to.achieve.this..Use.the.IR.Transmitter.Finder.
feature.to.assist.you.
h. Keep.the.distance.between.the.two.remotes.
to.approximately.1.inch.and.do.not.move.or.
change.the.distance.between.the.two.remotes.
until.you.have.learned.all.the.required.buttons.
for.that.Mode.
i. When.Learning,.do.not.release.the.button.being.
Learned.until.the.red.indicator.has.blinked.off.
for.half.a.second.
j. Avoid.learning.your.original.remote.Volume/
Mute.buttons.unless.you.are.sure.these.operate.
the.same.device.e.g..some.original.DVD.
remotes.include.TV.Volume/Mute.button.control.
and.can.be.two.different.types.of.code.
k. Avoid.learning.your.original.remote.DVD.
transport.buttons.unless.you.are.sure.these.
operate.the.same.device.e.g..some.original.TV.
remotes.include.DVD.button.control.and.can.be.
two.different.types.of.code.
l. If.learning.the.first.or.second.buttons.for.a.
Mode.results.in.continuous.errors.then.try.the.
following:
i.....End.the.Learn.session.by.pressing.the.SETUP
button.
ii....Clear.out.the.learned.commands.for.that.Mode.
iii...Check.the.IR.transmitters.are.correctly.
aligned.between.the.two.remotes.(use.the.IR.
Transmitter.Finder.facility).
iv...Adjust.the.distance.between.the.two.remotes.
to.be.closer.(e.g..half.an.inch).or.a.further.away.
(e.g..2.inches).from.each.other.
v... Try.learning.the.original.remote.for.that.Mode.
again.
If.problems.reoccur.with.the.same.button.check.
the.original.remote.button.being.learned.–.does.it.
transmit?.Does.it.operate.the.target.device?..Try.
learning.that.button.under.a.different clear.Mode...
If.it.learns.okay.then.it.is.likely.to.be.a.different.
code.type.from.the.others.and.cannot.be.learned.
under.the.same.Mode.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips On Learning (cont.)
The.learning.feature.lets.you.“learn”.functions.
from.your.original.remote.control..For.example.
-.you.may.want.to.use.your.remote.to.operate.
the.RANDOM.PLAY.feature.from.your.original.
CD.remote.control..This.remote.is.equipped.with.
an.“easy.learning”.feature.that.lets.you.“learn”.
features.(such.as.RANDOM.PLAY.from.your.
original.CD.remote).
Tips on Learning
You.can.only.learn.one.device.type.under.any.one.
Mode.button.e.g..only.learn.TV.codes.under.the.
TV Mode,.DVD.codes.under.the.DVD Mode,.etc..If.
you.are.trying.to.learn.from.a.“Universal”.remote,.it.
might.have.more.than.one.code.type.stored.under.
a.Mode..Try.learning.from.another.remote.to.see.if.
there’s.a.problem.with.the.type.or.brand.of.remote.
you.are.trying.to.learn.from..
a. Some functions from some types of remotes
might not be able to be learned.
b. No functions may be stored under LEARN,
SETUP, or BACKLIGHT buttons.
c. Only one original device type can be learned
per individual Mode.
d. Use.fresh.batteries.for.both.the.Learning.
Remote.and.the.Original.Remote.
e. Keep.at.least.three.feet.away.from.
incandescent.or.low-energy.lights.when.
learning.
f. Perform.a.Master.Clear.(see.page.16).before.
learning.and.try.learning.2.or.3.commands.
initially..Then.carry.out.a.Master.Clear.before.
completely.learning.your.original.remote’s.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
IR Transmitter Finder
This.feature.assists.you.in.identifying.where.your.
original.remotes.IR.transmitter.is.located.and.
is.particularly.useful.if.your.original.remote’s.IR.
transmitter.is.hidden.behind.a.lens..
1...Point.both.remotes.facing.each.other.by.
approximately.1.inch.apart.(see.Tips.on.
Learning.on.previous.pages).
2...Press.and.hold.the.SETUP button.until.the.red.
indicator.turns.on,.then.release.the.button.
3...Press.and.release.the.desired.Mode.button.(TV,.
DVD,.etc.),.the.red.indicator.blinks.then.stays.
on.
4...Press.and.release.the.LEARN button,.the.red.
indicator.blinks.then.stays.on..
5...Press.and.hold.any.Original Remote button.
and.move.the.Original Remote.to.the.left.
and.right,.and/or,.up.and.down.in.front.of.
the.Learning.remote.IR.transmitter...The.
red.indicator.will.remain.on.if.no.IR.from.the.
Original.remote.is.found.and.the.red.indicator.
will.blink.on.and.off.more.rapidly.when.the.IR.
transmitters.are.lining.up...The.point.where.the.
red.indicator.blinks.most.rapidly.is.where.the.
two.IR.transmitters.are.aligned...Note.some.
original.remotes.will.only.transmit.IR.on.the.
initial.button.press.then.stop...In.these.cases,.
quickly.press.and.release.the.original.remote.
button.repeatedly.during.this.procedure.
6...You.can.now.learn.a.button.from.your.original.
remote.by.continuing.from.“Step 4”.in.the.
“Learning Commands”.section.on.the.next.
page,.or,.to.exit.at.this.point,.press.and.release.
the.SETUP button
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning Commands
1...Press.and.hold.the.SETUP button.until.the.red.
indicator.turns.on,.then.release.the.button.
2...Press.and.release.the.desired.mode.button.
(TV,.DVD,.etc.),.the.red.indicator.blinks.then.
stays.on.
3...Press.and.release.the.LEARN button,.the.red.
indicator.blinks.then.stays.on..
4...Press.and.release.the.Learning Remote button.
that.you.want.to.teach.(e.g..POWER).
5...Point.both.remotes.facing.each.other.by.ap-
proximately.1.inch.apart.(see.tips.on.page.12).
6...Press.and.hold.the.Original Remote button.
(e.g..Power).until.the.red.indicator.blinks.once.
and.stays.on..If.there.is.a.learning.problem,.the.
indicator.blinks.for.three.seconds.and.stays.on..
If.this.happens,.repeat.Steps.4.to.6.
7...Repeat.Steps.4-6.for.other.buttons.you.want.to.
learn.
8...Press.and.release.the SETUP button.when.all.
desired.remote.commands.are.learned..Code.
Learning.is.now.complete.
4.
1.
3.
2.
Line up your remotes (that you’re learning from)
in front of the learning remote on a hard surface
approx. 1-inch apart.
6.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Commands
To Clear all Learned Commands under
a mode
1.. Press.and.hold.the.SETUP button.until.the.red.
indicator.turns.on..Release.the.SETUP button.
2.. Press.and.release.the.button.for.the.mode.you.
want.to.clear.(TV,.DVD,.etc.)..The.red.indicator.
blinks.off.
3.. Press.and.release.the.LEARN button.TWICE...
The.red.indicator.blinks.off.
4.. Press.and.release.the.SETUP button..The.red.
indicator.turns.off..All.learned.Commands.under.
that.mode.are.now.cleared.
Master Clear - To Clear all Learned
Commands under all modes
1.. Press.and.hold.the.SETUP button.until.the.red.
indicator.turns.on..Release.the.SETUP button.
2.. Press.and.release.the.LEARN button.TWICE..
The.red.indicator.blinks.off.
3.. Press.and.release.the.SETUP button..The.red.
indicator.turns.off..All.Learned.commands.in.the.
remote.are.now.cleared.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Remote does not operate your product
1.. Select.the.mode.for.the.product.you.want.to.
control.
2.. Program.the.remote.with.a.new.code.
3.. Install.new.batteries.in.the.remote..(You.might.
have.to.reprogram.your.remote.after.installing.
new.batteries.)
4.. If.these.steps.do.not.work,.the.remote.might.not.
be.compatible.with.your.product.
Remote does not operate some
features of your product
1.. Program.remote.with.a.new.code.
2.. If.this.does.not.work,.your.remote.might.not.be.
able.to.operate.all.features.of.your.product.or.
the.button.names.might.be.different.than.your.
product.
Indicator blinks after you program a
product code
1.. This.means.the.remote.did.not.accept.the.code.
2.. Try.to.program.the.code.again.or.try.a.different.
code.
Lost Your Codes?
Enclosed.with.this.remote.is.a.sticker.on.which.
you.should.write.the.codes.for.each.device.you.
programmed..Apply.the.sticker.to.the.back.of.
the.remote.or.somewhere.convenient.for.future.
reference.
Also.on.the.sticker.is.our.website.address.which,.
should.you.lose.your.codes.or.programming.
instructions,.you.can.find.available.on.our.website:
www.jascoproducts.com
17
Download from Www.Somanuals.com. All Manuals Search And Download.
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.
to.be.free.from.manufacturing.defects.for.a.period.
of.ninety.days.from.the.original.date.of.consumer.
purchase...This.warranty.is.limited.to.the.repair.
or.replacement.of.this.product.only.and.does.not.
extend.to.consequential.or.incidental.damage.to.
other.products.that.may.be.used.with.this.unit...
This.warranty.is.in.lieu.of.all.other.warranties.
express.or.implied...Some.states.do.not.allow.
limitations.on.how.long.an.implied.warranty.lasts.
or.permit.the.exclusion.or.limitation.of.incidental.or.
consequential.damages,.so.the.above.limitations.
may.not.apply.to.you...This.warranty.gives.you.
specific.rights,.and.you.may.also.have.other.rights.
that.vary.from.state.to.state....If.unit.should.prove.
defective.within.the.warranty.period,.return.prepaid.
with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114-2205
18
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
......24958
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK..73114-2205
Made.in.China. ..................................24958-1/10
Download from Www.Somanuals.com. All Manuals Search And Download.
|