ZGU384LSMSS/ZGU384NSMSS
GE Monogram® 30" Stainless Steel Gas Cooktop
Dimensions and Installation Information (in inches)
21-5/8”
Deep at Center
30-3/4”
3-3/4”
12” Min.
from Cutout
to Side Walls
19-5/8”
2-7/8“ Min.
28-1/2”
from Cutout
to Rear Vertical
Combustibles
2-1/2” Min.
from Cutout
to Front of
Countertop
30” Min.
Cabinet Base
Note: Reference Instructions, GE Monogram 30”
Stainless Steel Cooktop Installation, packed with
product, for complete details.
Note: The cooktop cutout is rectangular.
The bowed front edge of the cooktop will sit on top
of the counter.
These cooktops may be installed in combination with a
Monogram downdraft vent, a Monogram single oven or a
Monogram warming drawer. See installation instructions
for details.
The house gas supply should be at least 1" from
the back wall.
The electrical outlet should be 12" below the
countertop and within reach of the 4 ft. power cord.
Model ZGU384NSMSS - Natural Gas
Model ZGU384LSMSS - Liquid Propane
These stainless steel cooktops are factory set for natural or
liquid propane gas. Be sure to order the correct model for
the installation situation.
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 6/07
130241
Download from Www.Somanuals.com. All Manuals Search And Download.
|