Fujitsu Server RX300 S2 User Manual

B7FH-2961-02EN-00

RX300 S2

��

PRIMERGY RX300 S2 Manuals

Manuals for this server can be accessed from the section below of the PRIMERGY Document & Tool CD (Disc 2).

[CD-ROM Drive] :\MANUAL\INDEX.PDF

Manuals can be displayed using Acrobat® Reader® or Adobe® Reader®. If using Acrobat® Reader®, use version 4.0 or later.

Reading and understand-

Checking the items

supplied

ing "Safety Precautions"

Check the contents in the package using

the "Contents List".

If any items are missing, inform an ofﬁce listed in

the "Contact Information".

Before using this server, be sure to read and un-

derstand the attached "Safety Precautions".

Also check it when connecting, installing internal options

and setting up this server.

Installing internal options

If internal options have been purchased separately, install them before installing the Operating System.

Available internal options and

installation locations

When installing internal options, perform operations after

reading the following manuals.

��

"Chapter 7 Installing Internal Options"

��

"PRIMERGY Server Books"/

��

"Supplement"

Install the OS before installing the following options.

Installing the OS after options have been installed will

cause installation operations to end in an error.

- Non-system hard disks

- External SCSI optional devices (DAT unit, Hard disk

cabinet, Backup cabinet, etc.)

��

After installing internal options, check that the order and

place of installation is correct and cables are correctly at-

tached.

Download from Www.Somanuals.com. All Manuals Search And Download.

Insert the server to ﬁt into the rail as-

sembly inside the rack.

Insert the inner rail of the server to the grooves of

the slide rail and slide the server towards the back

to install to into the rack.

Attach the slide rail assemblies and

insert the rack nuts into the rack

holes.

Attach slide rails with washers.

Insert latches of the rack nuts from inside of the

rack bracket.

��

�

��

Rails have lock.

When pulling out the server, press the lock to release.

Left and right slide rails are different.

Check the letter at the slide rail for correct installa-

tion.

- Be careful not to pinch your ﬁngers or catch any cloth-

ing when sliding the server into the cabinet. This could

cause injury.

Tightly fasten the binding head screws

on the rear slide rails.

- For the ﬁrst time installation, make sure to slide the

server backward and ﬁx it to the rack securely.

Fasten the server to the rack.

��

- Dispose unused parts for rack installation.

- Install the attached blank panel to the rack, where

the server or peripheral devices are not installed.

Connecting peripheral devices

Peripheral devices, such as the keyboard and mouse, etc., are connected to the server in the following

order.

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning on the power and setting hardware

Normally, hardware settings are not required to be changed from the default.

However, in the following cases, start each utility and check/change hardware settings.

"Chapter 8 Hardware Conﬁguration / Utilities"

��

BIOS Setup utility

Change the settings in the following cases:

- When changing the drive to start the server

- When installed/removed optional devices

- When performing remote installation

- Print the "Conﬁguration Sheets" - "Conﬁguration sheet" in the PRIMERGY Document & Tool CD (Disc 2) and

then write down the hardware conﬁguration and the setting value of BIOS setup utility.

Power on the peripheral devices, such

as the display.

Set the hardware.

If no hardware settings are performed, skip to the

next step when a message to insert the ServerStart

ﬂoppy disk is displayed.

Turn on the power and insert

ServerStart CD-ROM immediately.

BIOS Setup utility

Press the power switch on the front of the

server.

Press the CD-ROM eject button, and insert

ServerStart CD-ROM.

When the "<F2> BIOS Setup / <F12>

Boot Menu" message appears at the server

startup (during POST), press the [F2] key.

Check/change the settings.

��

Select "Save Changes & Exit" from the

Exit menu and press the [Enter] key.

For the use of Linux distribution with diskless type,

refer to the Fujitsu PRIMERGY website (http://

primergy.fujitsu.com).

��

Download from Www.Somanuals.com. All Manuals Search And Download.

Installing the OS

This section explains the procedures to install the OS using ServerStart.

For details about os installation procedures when not using ServerStart, refer to the "User's Guide".

"Chapter 4 Manual OS Installation"

��

Insert the ServerStart ﬂoppy disk

supplied with this server, and click

[Create].

A network setup window for remote installation

appears.

Click [Start here to create a complete

conﬁguration ﬁle].

The [Open ServerStart Conﬁguration File] window

appears.

Select the conﬁguration ﬁle and click

[Create].

The wizard starts up automatically.

Click [OK].

Click [Build a ServerStart Floppy Disk].

The completion message appears.

Set the server information.

Click the wizard sequentially,

and enter the server information.

Clicking [help] under the wizard window displays

explanations of items and setting hints.

Click [OK].

Please Select your keyboard window appears.

RAID wizard

Select your keyboard language from

the drop-down list and click [OK] .

Conﬁgure RAID.

Disk wizard

The subsequent start procedure may take several

minutes. The [Welcome to ServerStart] window ap-

pears.

Create and format hard disk partitions.

(OS) Install wizard

Set the computer information, user infor-

mation, network protocol, etc.

Click [Click here to prepare and/or initi-

ate an operating system installation].

The [Select the operating system to be installed]

window appears.

Application wizard

It is recommended to install the applica-

tion selected as default.

Click [Special Hints on Operating System Installa-

tion] and read the contents.

Click [Close and save Conﬁguration

File].

Click [Save] and save the conﬁguration ﬁle.

Click[MS Windows Operating Sys-

tems].

Click[Click here, to Start the Installation

of (OS)].

The license window appears.

Click the OS to install.

Click[Prepare & initiate an unattended

installation of (OS)].

Follow the window instructions.

The guided mode for the selected OS starts up.

Incorrect settings will cause errors to be dis-

played.

Enter correct values manually to continue the

process.

When a message indicating installation

completion appears press any key.

Restart the system.

Click [Start] - [Shutdown]. Select [Restart] and

click [OK].

When the system restarts, log on to

the server using the Administrators

account for the local computer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Turning off the power and installing optional devices

Install optional devices to be installed after the OS installation, such as UPS device.

"Chapter 7 Installing Internal Options"

��

After optional devices are installed, set the BIOS

setup utility or WebBIOS as required.

For details about setting procedures, refer to the

"User's Guide Chapter 8 Hardware Conﬁguration/

Utilities" and "PRIMERGY RX300 S2 Onboard

SCSI RAID User's Guide".

Check that no medium is inserted in

the ﬂoppy disk drive or CD-ROM drive.

Exit the operating system (OS).

After the OS is exited, the server is automatically

turned off.

When the power of the server is not off after the OS

is exited, press the power switch on the front of the

server.

When turning on the server again after turning it

off, wait for at least ten seconds and then press the

power switch.

If the server is turned on straight after being turned

off, an error will occur that may cause damage.

Power off the peripheral devices, such

as the display.

Install the optional devices.

Hints for error handling

Support and Service

In preparation of a failure occurring, set the fol-

lowing.

PRIMERGY information

The latest PRIMERGY, driver, and software information is

available at the address below. Use as necessary.

http://primergy.fujitsu.com

"Chapter 5 Operations after OS

Installation"

��

- Set to collect memory dump

If the memory dump is set, debugging information is au-

tomatically saved when the STOP error occurs in the sys-

tem. This helps to analyze the cause of error occurrence.

Before requesting repairs

If an error occurs in this server, refer to "User's Guide 9.2

Troubleshooting". If problems can still not be solved, con-

tact an ofﬁce listed in the "Contact Information".

When contacting the ofﬁce listed in the "Contact Informa-

tion", inform them of the product ID and a manufactures

number which are detailed on labels on the base of the

server.

- Create a system restoration disk

When the system ﬁle or system environments are dam-

aged, the system can be reconstructed with the content

saved in the system restoration disk.

- Store system settings

By storing the BIOS settings, the original information can

be recovered when the setting information is lost.

��

When this server is installed, store and save the BIOS set-

tings by yourself. Be careful not to lose the stored BIOS

setting information as you must provide this when you

contact an ofﬁce listed in the "Contact Information".

��

When the settings are completed, make sure to

check notes before operation.

Also read the points to note about requesting repairs before-

hand in "User's Guide 9.9.2 Contacting Maintenance Sup-

port".

"5.5 Note before Operating the Server"

��

Print the "Conﬁguration Sheets" - "Accident sheet" and en-

ter the checked information.

Be careful not to lose this sheet, as you must provide this

information when you contact an ofﬁce listed in the "Con-

tact Information".

For details about maintenance after operations have

started, refer to "User's Guide Chapter 9 Operating

and Maintenance".

Download from Www.Somanuals.com. All Manuals Search And Download.

Non-durable components

Depending on the environment and period of usage there

will be non-durable components that require replacement

within the warranty period. Customers who have signed up

to hardware maintenance contract will be provided with re-

placement parts free of charge and will have higher priority

for replacement.

Recycle

When disposing of this server, contact an ofﬁce listed in

the "Contact Information".

This server must be disposed of as industrial waste.

Customers not signed up to hardware maintenance contract

will be charged for operation cost (including the mainte-

nance parts) separately.

- Service life of non-durable components

The service life of non-durable components is decided

based on the presumption that the server is used in an ap-

propriate environment.

The temperature of the operating environment is between

10°C and 35°C. However the service life is calculated us-

ing 25°C as the average temperature so air conditioning

should be used.

- Non-durable component

Item

Description

Battery for RAID Regardless of how long power has been turned on

Ctrl 2-Channel

128MB w/BBU

or off, non-durable components will be replaced

after 3 years but the there will be an effect on the

life span of the battery. For details, refer to "User

Guide" for RAID Ctrl 2-Channel 128MB w/BBU.

Contact Information

Australia:

Philippines:

Fujitsu Philippines, Inc.

Tel: +63-2-812-4001

Fax: +63-2-817-7576

Address: 2nd Floor, United Life Building, A. Arnaiz

Legaspi Village, Makati, Metro Manila Philippines

Singapore:

Fujitsu Asia Pte. Ltd.

Tel: +65-6777-6577

Fujitsu Australia Limited

Tel: +61-2-9776-4555

Fax: +61-2-9776-4556

Address: 2 Julius Avenue (Cnr Delhi Road)

North Ryde, Australia N.S.W. 2113

China:

Fujitsu (China) Holdings Co., Ltd.

Tel: +86-21-5292-9889

Fax: +86-21-5292-9566

Address: 18F, Citic Square, 1168 West Nanjing Road Shanghai, China

S200041

Fax: +65-6771-5502

Address: 20, Science Park Road, #03-01 TeleTech Park,

Singapore Science Park II, Singapore 117674

Taiwan:

Fujitsu Taiwan Limited

Tel: +886-2-2311-2255

Fax: +886-2-2311-2277

Address: 19F, No.39, Section 1, Chung hwa Road Taipei, Taiwan

Thailand:

Fujitsu Systems Business (Thailand) Ltd.

Tel: +66-2-500-1500

Fax: +66-2-500-1555

Address: 12th Floor, Olympia Thai Tower, 444 Rachadapisek Road

Samsennok, Huaykwang, Bangkok, Thailand 10310

Vietnam:

Fujitsu Vietnam Limited

Tel: +84-4-831-3895

Hong Kong:

Fujitsu Hong Kong Limited

Tel: +852-2827-5780

Fax: +852-2827-4724

Address: 10/F., Lincoln House, 979 King's Road

Taikoo Place, Island East, Hong Kong

Indonesia:

PT. Fujitsu Systems Indonesia Ofﬁces Headquarters

Tel: +62-21-570-9330 (Hunting)

Fax: +62-21-573-5150

Address: Wisma Kyoei Prince 10th Floor Jl. Jend. Sudirman Kav 3-4

Jakarta, Indonesia 10220

Korea:

Fujitsu Korea Ltd.

Tel: +82-2-3787-6000

Fax: +82-2-3787-6066

Address: Susong Tower Building, 83-1 Susong-Dong

Jongno-Gu, Seoul, Republic of Korea 110-140

Malaysia:

Fujitsu (Malaysia) Sdn. Bhd.

Tel: +60-3-8318-3700

Fax: +84-4-831-3898

Address: Unit 802-8th ﬂoor, Fortuna Tower Hanoi 6B Lang ha Street,

Ba dinh District, Hanoi Socialist Republic of Vietnam

United States:

Fujitsu Computer Systems Corporation

Tel: +1-800-831-3183

Fax: +1-408-496-0575

Address: 1250 East Arques Avenue, Sunnyvale, CA USA 94088-3470

Fax: +60-3-8318-8700

Address: 1st Floor, No.3505 Jalan Technokrat 5

63000 Cyberjaya, Selangor Darul Ehsan Malaysia

For the latest information, refer to the Fujitsu PRIMERGY website (http://primergy.fujitsu.com).

Download from Www.Somanuals.com. All Manuals Search And Download.

Notes

Data Backup

To protect data stored in this device (including basic software and application software), perform backup and other necessary operations. Note that data protection is

not guaranteed when repairs are performed. It is the customer's responsibility to maintain backup copies in advance.

In case of data loss, Fujitsu assumes no liability for data maintenance or restoration and damages that occur as a result of the data loss for any reason, except for items

covered under warranty.

High Safety

The Products are designed, developed and manufactured as contemplated or general use, including without limitation, general ofﬁce use, personal use, household use,

and ordinary industrial use, but are not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high

safety is secured, could lead directly to death, personal injury, severe physical damage, or other loss (hereinafter "High Safety Required Use"), including without limi-

tation, nuclear reaction control in nuclear facility, aircraft ﬂight control, air trafﬁc control, mass transport control, medical life support system, missile launch control

in weapon system. You shall not use this Product without securing the sufﬁcient safety required for the High Safety Required Use. If you wish to use this Product for

High Safety Required Use, please consult with our sales representatives in charge before such use.

Problems may occur with this device in the event of an instantaneous voltage drop of the power supply due to lightning, etc. To prevent an instantaneous voltage drop

of the power supply, we recommend that you use an uninterruptible power supply system.

Software License Agreement

Please read the following terms and conditions before you use the software preinstalled in the server you purchased or the software attached to the server ( hereinafter

collectively "Software"). By using the Software, you are agreeing to be bound by all of the following terms and conditions. Notwithstanding the foregoing, if any soft-

ware subject to any other terms and conditions than those of this agreement is preinstalled in or attached to the server as a part of Software, you shall comply with such

other terms and conditions.

I. License and Copyrights

Fujitsu Limited (hereinafter "Fujitsu") grants you a limited, non-exclusive, license to:

(i) use the Software solely on the server, which the Software is preinstalled in or is attached to.;

(ii) copy the Software for installation and backup purpose; and

(iii) embed the Software to other software, in whole or in part, in accordance with the procedure described in the applicable documentation.

For the avoidance of doubt, you are only granted the right to use this Software and all copyright, title and other ownership rights to this Software and any derivative

works thereof is retained by FUJITSU and/or its suppliers.

II. Copies

1. You may only copy the Software as set forth in Clause I (ii) and (iii) above. If you embed the Software in another software pursuant to Clause I (iii), you may not

make copies of such software as so embedded other than one (1) backup copy unless expressly otherwise licensed by Fujitsu. If, however, a copy protection mechanism

is implemented in the Software, you cannot and are prohibited from making any copies of the Software.

2. You shall include all copyright notices and proprietary legends on all copies of the Software and shall not modify, delete or conceal such notices and legends.

3. All terms and conditions contained herein shall apply to the copies of the Software.

III. Assignment

You may not assign the Software, except the case where you assign the Software with all materials related to the Software, including the media of the Software attached

to the server, the documentation, and the backup copy, together with the server. Notwithstanding the foregoing, you may not rent, lease, sublicense, create lien against

the Software.

IV. Modiﬁcation

You may not modify or, except to the extent expressly permitted by applicable law, reverse engineer (including, without limitation, decompile and disassemble) the

Software, and you may not permit any third party to do so.

V. Limited Warranty

1. You acknowledge that Fujitsu cannot guarantee that your use of the Software will be uninterrupted, that the Software will be error free or that all Software errors

will be corrected. However, (i) within ninety (90) days following your acquisition of the server you notify the reseller from whom you have acquired the server of non-

conformance of the Software to the description in the documentation, or (ii) within one (1) month following your acquisition of the server you notify the reseller from

which you have acquired the server of physical defects of the media containing the Software, Fujitsu will, at its sole discretion, correct the non-conformance or provide

you with information necessary to correct the non-conformance, or replace the defective media with new media. Only if you inform such reseller of your problem with

the Software during the above mentioned warranty period and provide satisfactory evidence of the date you acquired the server Fujitsu will be obligated to honor this

warranty.

2. Except for Clause V Section 1, Fujitsu disclaims all other warranty, express or implied, and expressly disclaims any implied, including without limitation, allwar-

ranty of merchantability, ﬁtness for a particular purpose or non-infringement of third parties' rights. In no event will Fujitsu be liable for any direct, indirect, incidental

or consequential damages (including, but not limited to, loss of proﬁts, interruption of business, loss of business information, and other pecuniary damages) resulting

from or arising out of the use or inability to use the Software even if Fujitsu has been advised of the possibility of such damages.

3. Even if a part of the Software has been developed by a third party, the warranty and remedy for such part of the Software are limited to those provided for in Clause

V Section1 and 2 above, and such third party shall have no liability for any claim arising out of the use, performance or non-conformance of the Software.

VI . Law

This Agreement and all matters arising out of or relating to this Agreement will be governed by the laws of Japan without giving effect to any choice of law rule.

VII. High Safety

These Software are designed, developed and manufactured as contemplated for general use, including without limitation, general ofﬁce use, personal use, household

use, and ordinary industrial use, but are not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely

high safety is secured, could lead directly to death, personal injury, severe physical damage, or other loss (hereinafter "High Safety Required Use"), including without

limitation, nuclear reaction control in nuclear facility, aircraft ﬂight control, air trafﬁc control, mass transport control, medical life support system, missile launch con-

trol in weapon system. You shall not use this Software without securing the sufﬁcient safety required for the High Safety Required Use.

VII Export

You shall comply fully with all relevant export laws and regulations with respect to this Software, including, but not limited to, the export laws and regulations of Ja-

pan. Without limiting the generality of the foregoing, You will not export or transfer this Software, or any product thereof (including any your application program), to

any destinations prohibited by any such laws and regulations.

IV. Entire Agreement

The terms and conditions hereof represent the complete agreement concerning this license between the parties and supersede all prior or contemporaneous written

communications between them. In the event that any additional terms or conditions are provided in the accompanied documentation, you must also comply with such

terms and conditions.

Fujitsu Limited

Microsoft, Windows, Windows Server are registered trademarks of the Microsoft Corporation in the USA and other countries.

Linux is a trademark or registered trademark of Linus Torvalds in the USA and other countries.

Adobe, Adobe Acrobat, Acrobat Reader are registered trademarks of Adobe Systems Incorporated.

All other hardware and software names used are trademarks or registered trademarks of their respective manufacturers.

Other product names are copyrights of their respective manufacturers.

Screen shot(s) reprinted with permission from Microsoft Corporation.

Download from Www.Somanuals.com. All Manuals Search And Download.

Edimax Technology Network Router BR 6104KP User Manual
Euro Pro Carpet Cleaner SE3318H User Manual
Fender Guitar Starcaster User Manual
First Alert Speaker System CM2837 User Manual
Fisher Price Baby Toy C6325 User Manual
Fitness Quest Home Gym 386da User Manual
Fluke Power Supply 2625A User Manual
Furuno Medical Alarms BR 500 User Manual
GE Air Conditioner 10 AZA User Manual
GN Netcom Computer Drive GN8110 User Manual