Fujitsu Scanner FI 6000NS User Manual

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Chapter 1 Scanner Feature s .................................................... 1

1.1 Scanner Features................................................................1

1.2 From Arrival through Operatio n ........................................2

1.3 Checking the Contents of the Scanner Package .............2

1.4 Names and Functions of Parts ..........................................3

Chapter 2 Setting up the Scanne r ........................................... 4

2.1 Space Requirements ..........................................................4

2.2 Installing the Scanner.........................................................4

2.3 Connecting the Cable s .......................................................4

Chapter 3 Setting up for Network Us e .................................... 5

3.1 Logging in............................................................................5

3.2 Changing the Administrator Password ............................5

3.3 Setting the Scanner Name .................................................6

3.4 Setting the Region/Timezone.............................................6

3.5 Setting the IP Address/DHCP ............................................7

3.6 Setting the DNS Server.......................................................8

3.7 Setting the WINS Serve r .....................................................8

3.8 Checking the Network Connection ...................................9

3.9 Restarting the Syste m ........................................................9

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

NetAdvantage 2005

This product includes software developed by the

University of California, Lawrence Berkeley

Laboratory and its contributors.

This product includes software developed by the

Kungliga Tekniska Hogskolan and its

contributors.

This product includes software developed by Yen

Yen Lim and North Dakota State University.

LEADTOOLS for .NET

WinPcap3.1

di Torino (Italy).

Davis (California).

1994, 1995, 1996, 1997 The Regents of the

University of California.

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

3. All advertising materials mentioning features

or use of this software must display the

3. Neither the name of the Politecnico di Torino,

CACE Technologies nor the names of its

contributors may be used to endorse or

following acknowledgement: "This product

includes software developed by the University

of California, Berkeley and its contributors."

promote products derived from this software

without specific prior written permission.

4. Neither the name of the University nor the

names of its contributors may be used to

endorse or promote products derived from this

software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE

CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF

THIS SOFTWARE IS PROVIDED BY THE

INSTITUTE AND CONTRIBUTORS "AS IS"

AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE

REGENTS OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Network Scanner fi-6000NS Getting Started

iii

Download from Www.Somanuals.com. All Manuals Search And Download.

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE

INSTITUTE OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Redistribution and use in source and binary forms

are permitted provided that the above copyright

notice and this paragraph are duplicated in all such

forms and that any documentation, advertising

materials, and other materials related to such

distribution and use acknowledge that the

software was developed by the University of

California, Berkeley. The name of the University

may not be used to endorse or promote products

derived from this software without specific prior

written permission.

THIS SOFTWARE IS PROVIDED "AS IS" AND

WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT

LIMITATION, THE IMPLIED WARRANTIES

OF MERCHANTIBILITY AND FITNESS FOR

A PARTICULAR PURPOSE.

North Dakota State University. All rights

reserved.

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

Tekniska Hogskolan (Royal Institute of

Technology, Stockholm, Sweden). All rights

reserved.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

3. All advertising materials mentioning features

or use of this software must display the

following acknowledgement: "This product

includes software developed by Yen Yen Lim

and North Dakota State University"

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

4. The name of the author may not be used to

endorse or promote products derived from this

software without specific prior written

permission.

3. All advertising materials mentioning features

or use of this software must display the

THIS SOFTWARE IS PROVIDED BY THE

AUTHOR "AS IS" AND ANY EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, BUT

NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL

THE AUTHOR BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS

following acknowledgement: "This product

includes software developed by the Kungliga

Tekniska Hogskolan and its contributors."

4. Neither the name of the University nor the

names of its contributors may be used to

endorse or promote products derived from this

software without specific prior written

permission.

THIS SOFTWARE IS PROVIDED BY THE

INSTITUTE AND CONTRIBUTORS "AS IS"

AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT

Download from Www.Somanuals.com. All Manuals Search And Download.

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

THIS SOFTWARE IS PROVIDED BY THE

PROJECT AND CONTRIBUTORS "AS IS"

AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT

LIMITED TO, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE

DISCLAIMED. IN NO EVENT SHALL THE

PROJECT OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Corporation.

Permission to use, copy, modify, and distribute

this software for any purpose with or without fee

is hereby granted, provided that the above

in all copies, and that the name of Digital

Equipment Corporation not be used in advertising

or publicity pertaining to distribution of the

document or software without specific, written

prior permission.

THE SOFTWARE IS PROVIDED "AS IS" AND

DIGITAL EQUIPMENT CORP. DISCLAIMS

ALL WARRANTIES WITH REGARD TO THIS

SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS. IN NO EVENT SHALL DIGITAL

EQUIPMENT CORPORATION BE LIABLE

FOR ANY SPECIAL, DIRECT, INDIRECT, OR

CONSEQUENTIAL DAMAGES OR ANY

DAMAGES WHATSOEVER RESULTING

FROM LOSS OF USE, DATA OR PROFITS,

WHETHER IN AN ACTION OF CONTRACT,

NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that: (1) source code distributions retain

the above copyright notice and this paragraph in

its entirety, (2) distributions including binary code

include the above copyright notice and this

paragraph in its entirety in the documentation or

other materials provided with the distribution.

The name of Juniper Networks may not be used to

endorse or promote products derived from this

software without specific prior written permission.

CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

THIS SOFTWARE IS PROVIDED "AS IS" AND

WITHOUT ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, WITHOUT

LIMITATION, THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE.

and 1999 WIDE Project.

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

3. Neither the name of the project nor the names

of its contributors may be used to endorse or

promote products derived from this software

without specific prior written permission.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

rights reserved.

WinDump3.9.5

di Torino (Italy).

Davis (California).

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

•Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

•Redistributions in binary form must reproduce

the above copyright notice, this list of conditions

and the following disclaimer in the

Redistribution and use in source and binary forms,

with or without modification, are permitted

provided that the following conditions are met:

1. Redistributions of source code must retain the

above copyright notice, this list of conditions

and the following disclaimer.

documentation and/or other materials provided

with the distribution.

2. Redistributions in binary form must reproduce

the above copyright notice, this list of

conditions and the following disclaimer in the

documentation and/or other materials

provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE

CONTRIBUTOR "AS IS" AND ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING,

BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND

FITNESS FOR A PARTICULAR PURPOSE

ARE DISCLAIMED. IN NO EVENT SHALL

THE COPYRIGHT HOLDERS OR

CONTRIBUTORS BE LIABLE FOR ANY

DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL

DAMAGES (INCLUDING, BUT NOT LIMITED

TO, PROCUREMENT OF SUBSTITUTE

GOODS OR SERVICES; LOSS OF USE, DATA,

OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

3. Neither the name of the Politecnico di Torino,

CACE Technologies nor the names of its

contributors may be used to endorse or

promote products derived from this software

without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE

CONTRIBUTORS "AS IS" AND ANY

EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE

IMPLIED WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE COPYRIGHT

OWNER OR CONTRIBUTORS BE LIABLE

FOR ANY DIRECT, INDIRECT, INCIDENTAL,

SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING,

BUT NOT LIMITED TO, PROCUREMENT OF

SUBSTITUTE GOODS OR SERVICES; LOSS

OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND

ON ANY THEORY OF LIABILITY, WHETHER

IN CONTRACT, STRICT LIABILITY, OR

TORT (INCLUDING NEGLIGENCE OR

OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF

ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Permission to use, copy, modify, and distribute

this program for any purpose and without fee is

hereby granted, provided that this copyright and

permission notice appear on all copies and

supporting documentation, the name of Carnegie

Mellon not be used in advertising or publicity

pertaining to distribution of the program without

specific prior permission, and notice be given in

supporting documentation that copying and

distribution is by permission of Carnegie Mellon

and Stanford University. Carnegie Mellon makes

no representations about the suitability of this

software for any purpose. It is provided "as is"

without express or implied warranty.

This product includes software developed by the

University of California, Lawrence Berkeley

Laboratory and its contributors.

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction

Thank you for purchasing the Network Scanner

fi-6000NS.

Canadian DOC Regulations

This easy-to-operate network scanner may be used to

scan documents for further use.

This digital apparatus does not exceed the Class B

limit for radio noise emissions from digital

apparatus set out in the Radio interference

Regulations of the Canadian Department of

Communications.

This Class B digital apparatus complies with

Canadian ICES-003.

This guide provides useful and detailed information on

setting up, connecting, and caring for your scanner.

The "Network Scanner fi-6000NS Operator's Guide"

contains further information about scanner settings,

scanner administration, and scanner operations, and may

be used as a general reference.

Please also read the Operator’s Guide for your

reference.

Le présent appareil numérique n'émet pas de

parasites radioélectriques dépassant les limites

applicables aux appareils numériques de la classe

B et prescrites dans le Règlement sur le brouillage

radioélectrique dictées par le Ministère des

Communications du Canada.

■ Regulatory Information

Cet appareil numérique de la classe B est

conforme _ la norme NMB-003 du Canada.

FCC Declaration

This equipment has been tested and found to

comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable

protection against harmful interference in a

residential installation. This equipment generates,

uses, and can radiate radio frequency energy and,

if not installed and used in accordance with the

instruction manual, may cause harmful

interference to radio communications. However,

there is no guarantee that interference will not

occur in a particular installation. If this equipment

does cause harmful interference to radio or

television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by

one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment

and receiver.

Bescheimigung des Herstellers /

Importeurs

Für den fi-6000NS wird folgendes bescheinigt:

•In ÅEereinsstimmung mit den Bestimmungen

der EN45014(CE) funkentstört

•Maschinenlärminformationsverordnung 3.

GPSGV: Der höchste Schalldruckpegel beträgt

70 dB (A) oder weniger, gemäß EN ISO 7779.

■ Note of Liability

BEFORE USING THIS PRODUCT, PLEASE

READ THIS MANUAL CAREFULLY. IF THIS

PRODUCT IS NOT USED CORRECTLY,

UNEXPECTED INJURY CAN OCCUR TO

USERS OR BYSTANDERS.

•Connect the equipment into an outlet on a circuit

different from that to which the receiver is

located.

Keep this manual in a safe place so that it can be

easily referred to during use of this product.

•Consult your dealer or an experienced radio/TV

While all efforts have been made to ensure the

accuracy of all information in this manual, PFU

assumes no liability to any party for any damage

caused by errors or omissions or by statements of

any kind in this manual, its updates or

supplements, whether such errors are omissions or

statements resulting from negligence, accidents,

or any other cause. PFU further assumes no

liability arising from the application or use of any

product or system described herein; nor any

liability for incidental or consequential damages

arising from the use of this manual. PFU

disclaims all warranties regarding the information

contained herein, whether expressed, implied, or

statutory.

technician.

FCC warning: Changes or modifications not

expressly approved by the party responsible for

compliance could void the user’s authority to

operate the equipment.

The use of a shielded interface cable is

ATTENTION

required to comply with the Class B limits

of Part 15 of FCC rules.

The length of the AC cable must be 2

meters (6.6 feet) or less.

Network Scanner fi-6000NS Getting Started

vii

Download from Www.Somanuals.com. All Manuals Search And Download.

Use in High-safety Applications

Replacing Batteries

This product has been designed and manufactured

on the assumption that it will be used in office,

personal, domestic, regular industrial, and

general-purpose applications. It has not been

designed and manufactured for use in applications

(simply called "high-safety applications" from

here on) that directly involve danger to life and

health when a high degree of safety is required,

for example, in the control of nuclear reactions at

nuclear power facilities, automatic flight control

of aircraft, air traffic control, operation control in

mass-transport systems, medical equipment for

sustaining life, and missile firing control in

weapons systems, and when provisionally the

safety in question is not ensured. The user should

use this product with adopting measures for

ensuring safety in such high-safety applications.

PFU LIMITED assumes no liability whatsoever

for damages arising from use of this product by

the user in high-safety applications, and for any

claims or compensation for damages by the user

or a third party.

This product has a battery (CMOS RAM battery)

on board to retain data such as

•Warning

• Do not replace the battery yourself, as

there is a risk of explosion if the wrong

type is used. Please contact your

maintenance engineer in charge when

the battery runs low.

• Do not touch the battery. Never install

or remove the battery by yourself.

Doing so may cause electric shock or

static electricity which can damage the

device.

Trademarks

Microsoft and Windows are registered trademarks

of Microsoft Corporation in the United States and/

or other countries.

Adobe, the Adobe logo, and Acrobat are either

registered trademarks of Adobe Systems

Incorporated in the United States and/or other

countries.

ABBYY^TMFineReader^TM7.x Engine © ABBYY

Software House 2005.

About the Use of Mercury

Lamp(s) inside this product contain

mercury and must be recycled or

disposed of according to local, state, or

OCR by ABBYY Software House. All rights

reserved.

federal laws.

ABBYY, FineReader are trademarks of ABBYY

Software House.

Other product names are the trademarks or

registered trademarks of the respective companies.

To avoid unexpected injuries:

•Do not lick or consume the substance contained

in the lamp.

•Do not breathe the chemical liquid contained in

the scanner lamps.

How Trademarks are Indicated in

This Manual

•Do not incinerate, crush, or shred the lamps or

scanner parts.

References to operating systems (OS) and

applications are indicated as follows:

LCD Peculiarities

•The LCD backlight is a fluorescent tube that

contains some mercury.

Windows

Windows® operating system

•Be aware that neither of the following is

All the descriptions in this manual assume the

usage of Adobe Acrobat bundled with this

product. However, Adobe Acrobat may be

upgraded without notice. If the descriptions differ

from the screens actually displayed, refer to the

Acrobat’s “Help”.

considered a fault.

• Despite the advanced technologies used

to produce the devices TFT color

LCD's, the large number of pixels

involved means that an occasional

(always-on) bright dot or (always-off)

dark dot may be visible.

• The characteristics of the LCD mean

that there may be some variation in hue

and intensity of colors across the screen.

viii

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer

Symbols Used in This Manual

PFU LIMITED

International Sales Dept., Imaging Business

Division, Products Group

Solid Square East Tower, 580 Horikawa-cho,

Saiwai-ku, Kawasaki-shi Kanagawa 212-8563,

Japan

This symbol alerts operators to particularly

important information. Be sure to read this

information.

ATTENTION

Phone : (81-44) 540-4538

This symbol alerts operators to helpful

HINT

advice regarding operation.

About Maintenance

The user must not perform repairs on this scanner.

Contact your FUJITSU scanner dealer or an

authorized FUJITSU scanner service provider for

repairs to this product.

A TRIANGLE symbol indicates that special

care and attention is required.

The drawing inside the triangle shows the

specific caution.

A CIRCLE with a diagonal line inside

shows action which users may not perform.

The drawing inside or under the circle

shows the specific action that is not

allowed.

Warning Indications Used in This

Manual

This indication alerts operators

to an operation that, if not strictly

observed, may result in severe

injury or death.

Outline characters on a colored

background show instructions users should

follow.

It may also include the drawing that shows

the specific instruction.

This indication alerts operators to

an operation that, if not strictly

observed, may result in safety

hazards to personnel or damage

to equipment.

Warning Label

The glass scanner windows inside the ADF

can become hot when the scanner is used.

Be careful not to touch the surface of the

glass scanner windows.

Do NOT remove from the scanner, stain or

ATTENTION

scratch the warning labels.

Screen Examples in This Manual

The screen examples in this manual are subject to

change without notice in the interest of product

improvement. If the actual displayed screen

differs from the screen examples in this manual,

operate by following the actual displayed screen

while referring to the User's Manual of the scanner

application you are using.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Safety Precautions

Do not install the device in locations that

has oil smoke, steam, humidity, and dust.

Do not install the scanner in locations

subject to oil smoke, steam, humidity, and

dust. Doing so might cause a fire or electric

shock.

Do not damage the AC cable.

A damaged AC cable may cause fire or

electric shock. Do not place heavy objects

on AC cables, or pull, bend, twist, heat,

damage or modify AC cables.

Do not use damaged AC cables or power

plugs, or install any cables or power plugs

to loose wall sockets.

Turn the scanner OFF if it is damaged.

If the scanner is damaged for any reason,

turn the scanner off and unplug the power

cable. Contact your FUJITSU scanner

dealer or an authorized FUJITSU scanner

service provider.

Use only specified AC cables and

connector cables.

Do not put liquids inside the scanner.

Do not insert or drop metal objects in to the

scanner. Do not scan wet documents or

documents with paper clips or staples. Do

not splash or allow the scanner to get wet.

Use only specified AC cables and connector

cables. Failure to use the correct cables

might cause electric shock and/or

equipment failure.

Please do not use the AC cable provided

with this scanner for other devices, since

this might cause equipment failure and

other troubles or an electric shock.

If foreign objects (water, small metal

objects, liquids, etc.) get inside the scanner,

immediately turn off the scanner and

disconnect the power plug from the power

outlet. Then, contact your FUJITSU scanner

dealer or an authorized FUJITSU scanner

service provider. Pay particular attention to

this warning in households where there are

small children.

Use this scanner only at the indicated

power voltage. Do not connect to

multiple-power strips.

Use this scanner only at the indicated

power voltage and current. Improper power

voltage and current might cause fire or

electric shock. Do not connect to multiple-

power strips.

Do not touch the inside of the scanner

unless necessary.

Do not take apart or modify the scanner.

The inside of the scanner contains high-

voltage components. Touching these

components might cause electric shock or

fire.

Do not touch the AC cable with wet

hands.

Do not touch the power plug with wet

hands. Doing so might cause electric shock.

Do not use the scanner if you smell a

strange odor.

If you detect heat coming from the device or

detect other problems such as smoke,

strange smells or noises, immediately turn

off the scanner and then disconnect its

power plug. Make sure that any smoke

coming from it has stopped, before

contacting your FUJITSU scanner dealer or

an authorized FUJITSU scanner service

provider.

Wipe any dust from the power plug.

Wipe off any dust from metal parts on the

power plug or metal fittings with a soft, dry

cloth. Accumulated dust might cause fire or

electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Before moving the scanner, disconnect

the power plug from the power outlet.

Do not install the scanner on unstable

surfaces.

Do not move the scanner with the power

and interface cables connected as this can

damage the cables, which can later cause

fire, electric shock as well as injury.

Before moving the scanner, be sure to

disconnect the power plug from the power

outlet, and all other data cables.

Make sure that the scanner is installed on a

flat, level surface and that none of its parts

extend beyond the surface top, such as a

desk or table. Do not install the scanner on

unstable surfaces. Install the scanner on a

level surface that is free of vibration to

prevent it from falling.

Make sure that the floor is free of any

obstructions.

Install the scanner on a strong surface that

will support the weight of the scanner and

other devices.

Protect the scanner from static electricity.

Install the scanner away from strong

magnetic fields and other sources of

electronic noise. Also, protect the scanner

against any static electricity, which can

cause the scanner to malfunction.

Do not block the ventilation ports.

Do not block the ventilation ports. Blocking

the ventilation ports generates heat inside

of scanner, which may result in fire or

scanner failure.

Do not use aerosol sprays near the

scanner.

Do not place heavy objects or climb on

top of the scanner.

Do not use aerosol sprays to clean the

scanner. Aerosol sprays can blow dirt and

dust inside the scanner, resulting in scanner

failure or malfunction.

Do not place heavy objects on the scanner

or use the scanner's surface top to perform

other work. Improper installation might

cause injuries and equipment failure.

Disconnect the power plug from the

power outlet when the scanner is not used

for a long period of time.

Firmly insert the power plug.

Firmly insert the power plug as far it can go

into the power outlet.

When the scanner is not going to be used

for a long period of time, be sure to

disconnect the power plug from the power

outlet for safety.

Avoid any contact when scanner is in use.

Do not install the scanner in the direct

sunlight.

Avoid touching any scanner mechanism

during scanning since this may cause

injuries.

Do not install the scanner under direct

sunlight or near heating apparatus. Doing

so might cause excessive heat to build up

inside the scanner, which can cause

scanner trouble or even fire. Install the

scanner in a well-ventilated location.

Do not use the scanner immediately after

moving it from a cold place into a warm

room.

Do not use the device immediately after

moving it from a cold place into a warm

room. Condensation may occur, which

might lead to scanning errors. Let the

device dry about one or two hours before

you use it.

Before moving the scanner, make sure the

shipping lock is locked.

When moving the scanner, be sure to lock

the shipping lock in order to prevent

damages to the scanner.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

xii

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 1 Scanner Features

1.1 Scanner Features

This easy-to-operate network scanner may be used to scan documents for further use:

• Scanned document files can be sent as an e-mail attachment.

• Scanned document files can be sent by fax.

• Scanned document files can be saved in a network folder.

The scanner has the following security features.

• Login authentication can restrict user access.

• Scans can be converted to password protected PDF files.

Internet

Send e-mail

SMTP Server

Scanner Settings

Orignal

Document

Fax Server

Send Fax

Scanned Data

Scanner

User

Authentication

LDAP Server

File Server

Save

The scanner functions available after login vary in the following ways for different types of user:

• Administrator

Can setup and manage the scanner. The administrator can operate via the scanner's touch

panel or via a computer web browser.

•

For login via the scanner's touch panel, scanner setup and management operations are possible.

For login via the web interface, scanner setup, management, and update operations are possible.

• Regular User

Can scan documents and then send or save the resulting data.

For more details, refer to the "Network Scanner fi-6000NS Operator’s Guide".

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

1.2 From Arrival through Operation

Refer to "1.3 Checking the Contents of the Scanner Package" (page

2).

Check package

Refer to "Chapter 2 Setting up the Scanner" (page 4).

Setup scanner

Refer to "Chapter 3 Setting up for Network Use" (page 5).

Setup network

Refer to "Chapter 4 Downloading the Manual" (page 10). This manual

is the "Network Scanner fi-6000NS Operator’s Guide".

Download manual

Perform scan test

User function settings

Operation

Refer to "Chapter 5 Performing a Scan Test" (page 11).

Refer to "Network Scanner fi-6000NS Operator's Guide".

1.3 Checking the Contents of the Scanner Package

When you open the scanner package, please handle the main unit and its attachments carefully.

Make sure the scanner package contains all the parts listed in the package contents list that is included in the package

box.

If any parts are missing or defective, contact your FUJITSU scanner dealer or an authorized FUJITSU scanner service

provider.

Download from Www.Somanuals.com. All Manuals Search And Download.

■

Removable Parts

1.4 Names and Functions of

Parts

Parts that can be removed from the scanner are

displayed below.

This section describes the scanner parts and their

functions.

Separate shaft

and roller

■

Front

Pad assembly

Pick roller

Sheet guide

ADF

Glass scanner windows

■

Rear

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 2 Setting up the Scanner

2.1 Space Requirements

The following space is required to set up the scanner:

Depth: 700mm

Width: 400mm

Height: 500mm

2.2 Installing the Scanner

2. Connect the AC adapter connector to the

scanner's DC inlet.

When lifting the scanner, always

hold it by the indentations on the

bottom of each side to ensure a

stable grip.

Holding the scanner in any other

way may cause it to be dropped

or damaged.

3. Connect the LAN cable to the LAN connector.

1. Place the scanner at its installation site.

2. Attach the ADF paper chute.

4. Attach the back cover.

Hold the ADF paper chute and insert its tabs into

the corresponding slots in the scanner as shown in

the following figure.

The side guides of the ADF paper chute should

face up.

Attach the cover with the connected AC cable or

LAN cable protruding out of the lower part of

the cover.

Tab

5. Connect the other end of the LAN cable to the

network hub.

2.3 Connecting the Cables

6. Insert the AC cable into a power outlet.

1. Connect the AC cable to the AC adapter.

⇒ The power is connected but the scanner is not

yet ready for operation.

Use only the AC adapter provided by the

ATTENTION

manufacturer.

Continue setting up the network.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 3 Setting up for Network Use

3. Enter the password.

3.1 Logging in

Password is case sensitive.

Enter "password" here.

To set up the network connection, you must login as the

administrator. The user name and initial password for

the administrator are as follows:

4. Press the [Login] button.

• User Name: admin

• Password: password

⇒ If the administrator name and password are

valid, the "System Settings" screen appears.

1. Press the startup button.

3.2 Changing the Administrator

Password

The administrator password can be changed.

1. Select the [System Settings] tab on the top

menu.

Startup button

2. Press the [Down] button on the left side menu.

⇒ Scroll the left side menu down until the

[Admin Password] tab appears.

⇒ After system startup, the "Login" screen

appears..

3. Select the [Admin Password] tab on the left

side menu.

After turning the power off, wait for at

ATTENTION

least ten seconds before turning the

power back on again.

If touch panel responses seem out of

HINT

alignment with the positions of objects on

the LCD screen, calibrate the screen.

For details, refer to "Appendix A Calibrating

the Touch Panel" (page 13).

2. Enter the user name.

⇒ The "Admin Password" screen appears.

User name is case sensitive. Enter "admin" here.

4. Enter the "Current Password", "New

Password", and "Confirm New Password".

Passwords must be between 7 and 127 characters

long.

Alphanumeric characters (case sensitive) and

symbols may be entered.

5. Press the [OK] button.

⇒ The new admin password is set.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

3.3 Setting the Scanner Name

If the scanner name is the same as one

already in use, network communication

problems will occur. In this case, try the

following steps:

HINT

A scanner name may be set to provide a network alias

for the device.

1. Disconnect the LAN cable and turn the

scanner off.

Do not use a name that is already

being used in the network.

Name duplication will cause a network

connection error.

2. Reboot the scanner with the LAN cable

still disconnected, and enter a non-

duplicate scanner name.

ATTENTION

3. Reboot the scanner again.

4. Re-connect the LAN cable to the scanner.

Restart may be performed after all necessary settings

have been completed.

1. Select the [System Settings] tab on the top

menu.

Continue with the Region/Timezone settings.

2. Select the [Scanner Name] tab on the left side

menu.

3.4 Setting the Region/Timezone

1. Select the [System Settings] tab on the top

menu.

2. Select the [Region/Timezone] tab on the left

side menu.

⇒ The "Scanner Name" screen appears.

3. Enter a scanner name.

Scanner names may be up to 15 characters long.

Use only alphanumeric characters (case sensitive)

and hyphens.

Scanner names cannot consist of numbers only.

⇒ The "Region/Timezone" screen appears.

4. Press the [OK] button.

3. Press the [List] button for the "Timezone" input

field.

⇒ The restart confirmation screen appears.

5. Press the [Later] button.

The default timezone is "(GMT+09:00) Osaka,

Sapporo, Tokyo".

⇒ A list of timezones appears.

4. Select a timezone.

⇒ The current scanner name, or changed scanner

name after next restart, is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

5. Select whether "Daylight Savings Time" should

be on or off.

3. Set the scanner's IP address. This may be

done automatically, by pressing the DHCP [On]

button.

This option is not shown for timezones where

daylight savings time is not used.

The IP address may also be set manually, by

pressing the DHCP [Off] button and entering

the following numerical addresses:

6. Press the [OK] button.

• IP Address

• Subnet Mask

• Default gateway

⇒ The Region/Timezone is set.

Continue with IP address/DHCP settings.

3.5 Setting the IP Address/DHCP

An IP address must be set in order to connect the

scanner to a network.

Do not use an IP address that already

ATTENTION

exists in the network.

IP address duplication will cause an

error during setup.

1. Select the [Network Settings] tab on the top

menu.

4. Press the [OK] button.

⇒ The information entered is set.

2. Select the [IP Address] tab on the left side

menu.

If the IP address is the same as one

HINT

already in use, network communication

problems will occur. In this case, try the

following steps:

1. Disconnect the LAN cable and turn the

scanner off.

2. Reboot the scanner with the LAN cable

still disconnected, and enter a non-

duplicate IP address.

3. Re-connect the LAN cable to the scanner.

When DHCP is set to "On", the following

settings are assigned by the DHCP:

•

IP Address

Subnet Mask

Default Gateway

DNS Server

WINS Server

⇒ The IP address/DHCP screen appears.

Even if DNS or WINS server is set, priority

is given to the scanner settings over the

DHCP settings.

Continue with the DNS settings.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

3.6 Setting the DNS Server

3.7 Setting the WINS Server

A primary DNS and secondary DNS can be set.

A primary WINS and secondary WINS can be set.

1. Select the [Network Settings] tab on the top

menu.

1. Select the [Network Settings] tab on the top

menu.

2. Select the [DNS Server] tab on the left side

menu.

2. Select the [WINS Server] tab on the left side

menu.

⇒ The "WINS Server" screen appears.

⇒ The "DNS Server" screen appears.

3. Enter the following numerical addresses:

• Primary WINS

• Primary DNS

• Secondary WINS

• Secondary DNS

If a WINS server setting is not required, enter

"0.0.0.0".

If a DNS server setting is not required, enter

"0.0.0.0".

A Secondary WINS cannot be set

without a Primary WINS.

A Secondary DNS cannot be set

without a Primary DNS.

ATTENTION

4. Press the [OK] button.

⇒ The information entered is set.

Continue with the WINS settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

6. Press the [Ping] button.

3.8 Checking the Network

Connection

⇒ A ping test is performed and the results are

displayed. If the result shows "Lost=0 (0%

loss)", the network connection is functioning

normally. For any other result, refer to

"Checking Basic Network Operation with a

Ping Test" (page 16).

The network connection may be checked by performing

a ping test.

1. Select the [Network Settings] tab on the top

menu.

2. Press the [Down] button on the left side menu.

⇒ Scroll the left side menu down until the [Ping]

tab appears.

3. Select the [Ping] tab on the left side menu.

After performing all settings, restart the system.

3.9 Restarting the System

1. Press the [Logout] button.

⇒ The restart confirmation screen appears.

⇒ The "Ping" screen appears.

2. Press the [Restart] button.

4. Select whether to set a server name or IP

address.

The [Server Name] and [IP Address] buttons

cannot both be selected.

5. Enter the target server name or IP addresses

(selected in Step 4).

• If the [Server Name] button is selected:

Enter a Fully Qualified Domain Name (FQDN)

or server name in the input field. This may be up

to 255 characters long.

⇒ The scanner restarts, and the "Login" screen

• If the [IP Address] button is selected:

appears.

Enter a numerical IP address.

Next, download the "Network Scanner fi-6000NS

Operator's Guide".

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 4 Downloading the Manual

In addition to this "Getting Started" guide, a "Network

Scanner fi-6000NS Operator's Guide" is also available.

The "Network Scanner fi-6000NS Operator's Guide"

contains information about scanner settings, scanner

administration, and scanner operations.

2. Press the [Download Manual] button.

Consult this manual when using the scanner.

download the "Network Scanner fi-6000NS Operator's

Guide".

The download procedure is as follows:

To download the manual from the scanner, the

following requirements apply:

Software

English versions:

• Microsoft® Internet Explorer 6 SP2

or later

⇒ The "File Download" screen appears.

• Adobe® Reader® (*)

• Any Windows® operating system

3. Press the [Save] button.

which supports the above software

Hardware • Any client PC which runs the

supported software

• XGA monitor or better

• LAN cable

* Adobe® Reader® can be downloaded from the

following site.

⇒ The "Save As" window appears.

http://www.adobe.com/

4. Select a folder and enter a file name.

1. Specify the scanner name as a URL in the web

browser's location bar.

For example, when the scanner name is

"SCAN001":

use "http://SCAN001/"

For URL's, an IP address can be set instead of a

scanner name. If the IP address is

xxx.xxx.xxx.xxx, the specified URL is

http://xxx.xxx.xxx.xxx/.

⇒ The "Login" screen appears on the web

5. Press the [Save] button.

browser.

⇒ The file is saved.

The "Network Scanner fi-6000NS Operator's Guide" is

a PDF file, and can be viewed with Adobe® Reader®.

Next, perform a scan test.

Download from Www.Somanuals.com. All Manuals Search And Download.

Chapter 5 Performing a Scan Test

Perform a scan test to determine if the scanner is

working properly. Login as a regular user to perform the

scan test.

4. Select the [Maintenance] button on the "Main

Menu" screen.

1. Load the documents to be test scanned.

S i d e

R e v e r s e

⇒ The "Login" screen appears.

⇒ The "Maintenance" screen appears.

2. On the "Login" screen, enter a "User Name"

and "Password".

5. Press the [Scan Test] button.

Enter "guest" for both fields here.

⇒ The scan settings information for the scan test

is displayed.

3. Press the [Login] button.

6. Press the [Scan] button.

⇒ If the user name and password are valid, the

"Main Menu" screen appears.

⇒ Scanning starts. When the scan has

completed, the "Scan Viewer" opens.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

If a multifeed is detected

7. Check the scanned data.

• Message

Feed Error: Document(s) may not match the set

paper size, ADF may have grabbed more than

one sheet, or documents may not be suitable for

scanning. Remove the documents from the ADF,

check them and try again. If problem persists,

consult the manual.

• Action

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. Remove the

document for which multifeed was detected, and

try the scan test again.

If a paper jam occurs

• Message

Paper jam has occurred. Remove the documents

from the ADF and try again.

• Action

8. Press the [OK] button.

⇒ The "Maintenance" screen is shown again.

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. If the "Scan

Viewer" screen appears with partially scanned

data, just click the [OK] button. Remove any

unscanned documents from the ADF. Open the

scanner's top cover, remove the jammed

document from the scanner, and close the

scanner's top cover. From the "Maintenance"

screen, try the test scan again.

■

If Scanning Completes

Successfully

Continue with the setting procedures described in

Chapter 1 of the "Network Scanner fi-6000NS

Operator's Guide".

System settings or user data can be

HINT

backed up from [Maintenance], [User Data

If a USB cable becomes disconnected

Store] or [System Settings File]. This can

only be performed via Web interface.

Backup should be performed regularly.

For more details, refer to the "Network

Scanner fi-6000NS Operator's Guide".

• Message

Scanner initialization has failed. Try turning the

power off and back on again. The administrator

should contact the FUJITSU scanner dealer or

an authorized FUJITSU scanner service provider

for help.

• Action

■

If Scanning does not Complete

Successfully

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. Check that

all cables are firmly connected, and try the scan

test again.

If the top cover is open

• Message

Top cover may be open. Close the top cover,

reload the documents and try again.

• Action

If an error occurs

• Message

An error has occurred. Try turning the power off

and back on again. The administrator should

contact the FUJITSU scanner dealer or an

authorized FUJITSU scanner service provider

for help.

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. Close the

top cover, and try the scan test again.

If no document is loaded

• Message

Document not found. Load a document into the

• Action

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. Contact your

FUJITSU scanner dealer or an authorized

FUJITSU scanner service provider.

ADF, making sure the side guides are adjusted

correctly and try again.

• Action

Click the [OK] button on the error dialog to

return to the "Maintenance" screen. Load a

document, and try the scan test again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix A Calibrating the Touch Panel

This should be done if and when the touch panel

responses seem out of alignment with the positions of

objects on the LCD screen.

The keyboard may also be used on the

calibration screen:

HINT

•

Press the [Home] key to jump straight to

the post-calibration test screen.

1. Login as the administrator.

•

Use the arrow keys to move the "+" to a

different calibration point. This allows a

bad touch to be redone.

For details, refer to "3.1 Logging in" (page 5).

⇒ The "System Settings" screen appears.

•

Press the [Esc] key to stop the calibration

process and return to the "Screen

Calibration" screen.

2. Select the [System Settings] tab on the top

menu.

Press the [Enter] key to close the error

dialog. (Not normally needed.)

3. Select the [Screen Calibration] tab on the left

side menu.

⇒ The "Calibration Screen" appears.

Repeat until the test screen appears, with the

following "Calibration" dialog box:

4. Press the [Calibrate Screen] button.

6. Trace a line on the screen with your fingertip.

⇒ A corresponding line will appear on-screen.

If the line does not appear correctly, press the

[Calib screen] button to return to Step 5.

If the screen becomes cluttered, press the

[CLR screen] button to remove all the lines.

Press the [Cursor on/off] button to toggle

ATTENTION

the mouse cursor between its "visible"

and "hidden" states.

⇒ A blank calibration screen appears, with a red

"+" (adjustment mark) in the top-left corner.

7. When you are satisfied with the touch screen

response, press the [Update] button.

5. Touch the "+" with your fingertip.

After being touched, the "+" will move to

the next calibration position. Each time

it stops, touch it again.

⇒ This saves the current calibration data,

completing the calibration process, and

returns you to the "Screen Calibration"

screen.

If the calibration is not performed

ATTENTION

carefully, or the [Enter] key is pressed

before all the calibration points have been

touched, the following error message may

appear:

Parameter Error. Please input, again.

Press the [Enter] key to dismiss the error

dialog, and perform the calibration again,

being careful to touch each calibration

point accurately.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix B Scanner Care

The glass scanner windows

inside the ADF can become hot

when the scanner is used.

The scanner must be cleaned more

frequently when the following types of

documents are used:

ATTENTION

Before cleaning inside the

•

Coated paper

scanner or replacing any parts,

turn off the power, unplug the AC

adapter from the outlet, and wait

for at least 15 minutes.

Documents with large areas of printing

Chemically treated paper such as

carbonless paper

•

Paper containing large amounts of

calcium carbonate filler

The power does not need to be

turned off when cleaning the

feed rollers.

•

Documents written in pencil

Documents with insufficiently fused

toner

■ Cleaning Materials

For more details, refer to "5.2 Cleaning the ADF " in the

"Network Scanner fi-6000NS Operator's Guide".

Cleaning

Materials

Parts No.

Remarks

1 bottle

Moisten the cloth with

this fluid and use to

wipe parts clean.(*)

■ Cleaning the LCD Touch Panel

Cleaner F1

(or isopropyl

alcohol)

PA03950-

0352

To prevent the touch panel screen from becoming dirty,

it should be regularly cleaned with a soft, dry cloth.

Take care when cleaning the touch panel. It can be

easily damaged, and should never be scratched or

banged with hard objects.

Soft, dry cloth

Any commercially available lint-free

product

* To obtain Cleaner F1, contact your FUJITSU dealer or

an authorized FUJITSU scanner service provider.

Always use a dry (not damp) cloth to

ATTENTION

clean the screen. Do not apply Cleaner

F1.

If dust is allowed to collect and harden

around the frame of the screen, it can

cause the touch panel to malfunction.

■ Cleaning Method

Clean the ADF with a soft cloth moistened with cleaner

F1.

■ Which Parts and When

■ Cleaning the Keyboard

Clean all parts after every 1,000 sheets scanned.

• Pad assembly

To prevent the keyboard from becoming dirty, it should

also be regularly cleaned with a soft, dry cloth.

• Feed rollers

• Pick roller

• Idler rollers

• Glass scanner windows

• Ultrasonic sensor

Always use a dry (not damp) cloth to

clean the keyboard. Do not apply

Cleaner F1.

ATTENTION

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix C Replacing Consumable Parts

The glass scanner windows

inside the ADF can become hot

when the scanner is used.

Use only the PFU LIMITED parts

ATTENTION

specified. Do not use consumable parts

made by other manufacturers.

Before cleaning inside the

scanner or replacing any parts,

turn off the power, unplug the AC

adapter from the outlet, and wait

for at least 15 minutes.

The following diagram shows the locations of the

consumable parts in the scanner. For more details, refer

to "5.5 Replacing Parts" in the "Network Scanner

fi-6000NS Operator's Guide".

■ Pad Assembly (PAD ASSY)

■ Replacement Part No. and

Standard Replacement Cycles

The usage count of consumable parts can be checked in

administrator mode on the "Usage Status" screen.

■ Pick Roller

Pick Roller

When parts need to be replaced soon, the "Status"

information field becomes orange. When parts need to

be replaced immediately, the "Status" information field

becomes red.

The following table specifies the replacement part

numbers and the standard replacement cycles.

Part name

Replacement cycle

Pad Assembly

(PA03289-0111)

After every 50,000 sheets scanned or

once a year

Pick Roller

(PA03289-0001)

After every 100,000 sheets scanned

or once a year

To obtain these parts, contact your FUJITSU dealer or

an authorized FUJITSU scanner service provider.

These replacement cycles are rough guidelines when

Pick Roller's Shaft

using 64 g/m²(17 lb) A4/Letter woodfree or wood

containing paper. They may vary according to the type

of documents scanned, scanner usage, and cleaning

frequency.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix D Network Connection Troubleshooting

■ Checking Basic Network Operation with a Ping Test

If a network connection is not possible, refer to "3.8 Checking the Network Connection" (page 9) for ping results and

how to deal with them.

Server

name

setting

Connection

Result

Action

status

"Ping statistics" shows "Lost=0

(0% loss)"

IP address /

server name

None

"Ping statistics" shows "Lost=4

(100% loss)"

IP address /

server name

Check that the ping target IP address or server name is

correct.

IP Address

If the ping target IP address is correct, refer to "Failure

to Connect to a Remote Computer using its IP Address"

(page 17) for further solutions.

Server name On the "Network Status" screen, change [Link speed /

Duplex mode] from "Auto-Negotiation" to a fixed mode.

This can be changed as follows:

1. Select the [Network Settings] tab on the top menu.

2. Press the [Down] button on the left side menu.

3. Select the [Network Status] tab on the left side

menu.

4. On the "Network Status" screen, select [Link

Speed/Duplex Mode].

5. Press the [OK] button.

"Ping statistics" shows "Lost=N NG

(1 to 99% loss)"

IP address /

server name

There may be a problem with the quality of the LAN

cable. Replace the LAN cable and try again.

IP address /

server name

On the "Network Status" screen, change [Link speed /

Duplex mode] from "Auto-Negotiation" to a fixed mode.

This can be changed as follows:

1. Select the [Network Settings] tab on the top menu.

2. Press the [Down] button on the left side menu.

3. Select the [Network Status] tab on the left side

menu.

4. On the "Network Status" screen, select [Link

Speed/Duplex Mode].

5. Press the [OK] button.

"Hardware error"

IP address /

server name

The LAN cable may have become disconnected during

the Ping test. Check the status of the LAN cable and try

again.

"Ping request could not find

host xxx.xxx.xxx. Please check

the name and try again."

Server name Check that the ping target server name is correct.

Check that the DNS server or WINS server settings are

correct.

If the ping target server name is correct, refer to "Failure

to Connect to a Remote Computer using its Server

Name" (page 18) for further solutions.

OK: Connection is operating normally. NG: Connection is faulty.

Download from Www.Somanuals.com. All Manuals Search And Download.

■ Failure to Connect to a Remote Computer using its IP Address

If a remote computer cannot be connected to using its IP address, and does not respond to a ping test, try the following

steps:

No.

Problem

Action

Connection error between a remote computer

and the scanner, or problem with the LAN

cable.

Check that the LAN cable has been attached to both the scanner and

remote computer correctly.

If the remote computer is connected using a LAN cable (straight

type), in case auto-mdi (automatic selection) is not supported, a LAN

cable (crossover type), switch, or router is required between the

scanner and remote computer.

If this is not the case, the LAN cable may be faulty. Find a LAN cable

that functions normally and try again.

IP address or subnet mask is invalid.

On the "IP Address" screen, check that the IP address or subnet mask

settings are correct.

For more details about the "IP Address" screen, refer to "3.5 Setting

the IP Address/DHCP" (page 7).

When using DHCP, the DHCP server does not Check the DHCP server connection status and the details of the server

settings.

operate normally, or there is a problem with

the DHCP server settings.

If using DHCP, on the "Network Status" screen, check that IP

address, subnet mask, and default gateway settings are all correct.

If these settings are not correct, the DHCP server may not operate

normally, or the DHCP server may not assign valid IP addresses

because of restricted number of leases or MAC address validation.

If the DHCP server operating environment is changed, restart the

scanner.

The "Network Status" screen can be displayed as follows:

1. Select the [Network Settings] tab on the top menu.

2. Press the [Down] button on the left side menu.

3. Select the [Network Status] tab on the left side menu.

Another host or communication device is

connected using the same IP address as the

scanner.

If the same IP address has already been used by another host or

communication device, then even if the other device has been given a

different IP address the remote computer may not recognize the

scanner’s "duplicate" IP address until it is rebooted. Restart the

remote computer.

If a duplicate IP address connection from another host or

communication device exists on a LAN, both it will be unusable.

If a duplicate IP address connection from another host or

communication device exists, pull out its LAN cable and restart the

remote computer.

Access is denied due to the establishment of a If a firewall has been established between the remote computer and

firewall between the remote computer and the the scanner, check that it has not been set to deny access to the

scanner.

network.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

No.

Problem

Action

The network link speed/duplex mode for the

scanner and remote computer are invalid, or

Auto-Negotiation is not supported by the

remote computer.

For this scanner, the default [Link Speed/Duplex Mode] setting is

"Auto-Negotiation".

On the "Network Status" screen, match the scanner and remote

computer's network link speed/duplex mode settings.

If the problem persists in spite of having set both the scanner and

remote computer's network link speed/duplex settings to "Auto-

Negotiation", change "Auto-Negotiation" to a fixed mode and check

again.

On the "Network Status" screen, change [Link speed / Duplex mode]

from "Auto-Negotiation" to a fixed mode.

This can be changed as follows:

1. Select the [Network Settings] tab on the top menu.

2. Press the [Down] button on the left side menu.

3. Select the [Network Status] tab on the left side menu.

4. On the "Network Status" screen, select [Link Speed/Duplex

Mode].

5. Press the [OK] button.

■ Failure to Connect to a Remote Computer using its Server Name

If connection to a remote computer using a FQDN is not possible even after the server name has been checked using a

ping test, try the following steps:

No.

Problem

Action

Same as in "Failure to Connect to a Remote

Computer using its IP Address" (page 17).

Check if a network connection is possible by trying the same solution

for "Failure to Connect to a Remote Computer using its IP Address"

(page 17).

The scanner's DNS server or WINS server

settings are invalid.

Check that the DNS and WINS server settings are correct.

The DNS server or WINS server is not

Ping the DNS and WINS servers to check they are functioning

functioning normally, or there is an error with normally.

the DNS or WINS server network connection. If the DNS or WINS server is not functioning, request the network

administrator to check its status.

■ Failure to Connect to the Scanner using a Web Browser

If the login screen does not appear after the scanner's URL is specified in the web browser, try the following steps:

No.

Problem

Action

Same as in "Failure to Connect to a Remote

Computer using its IP Address" (page 17).

Check if a network connection is possible by trying the same solution

for "Failure to Connect to a Remote Computer using its IP Address"

(page 17).

Download from Www.Somanuals.com. All Manuals Search And Download.

No.

Problem

Action

The DNS server or WINS server is not

For the URL in the web browser, use the following IP address to

functioning normally, or the scanner name has check the connection.

not been registered in the DHCP or WINS

server.

Example: http://192.168.1.200/

If it is possible to connect the scanner from the web with a specified

IP address, specify the scanner's IP address in the DNS or WINS

server. Also, check the DNS or WINS server settings on the web

browser terminal.

A misconfigured firewall between the web

browser and the scanner is denying access.

If there is a firewall between the computer running the web browser

and the scanner, check that it settings are not preventing access.

In Microsoft® Internet Explorer, in the

"Tools" menu, "Internet Options", [Security]

tab, the security level for the corresponding

zone is set as "high", or in [Custom Level],

"Scripting", "Active Scripting" is set to

"Prompt" or "Disable".

If the URL includes a scanner name, the scanner will be connected

using an Intranet Zone. If the URL includes an IP address, the

scanner will be connected using the Internet Zone.

In Microsoft® Internet Explorer, in the "Tools" menu, "Internet

Options", try the following settings for the corresponding zone.

• To enable "Active Scripting", set in one of the following ways:

• In the [Security] tab, set the required "Security level for this

zone" to "Medium".

• In the [Security] tab, click the [Custom Level] button. Then,

set the "Scripting", "Active Scripting" to "Enable".

• If connecting via the Internet zone, on the [Privacy] tab, set the

level to below "Medium High".

After the above settings have been performed, in "Temporary

Internet Files", press the [Delete Cookies] button to delete all

temporary internet files.

■ Problems when Connecting to the Scanner using a Web Browser

If, when connecting to the scanner via a web browser the "Scripts are usually safe. Do you want to allow scripts to run?"

message appears, or if, when connecting to the scanner via a web browser, the "Login" screen appears but the buttons

can not be selected, try the following steps:

No.

Problem

Action

In Microsoft® Internet Explorer, in the "Tools"

menu, "Internet Options", [Security] tab, the

security level for the corresponding zone is set as

"high", or in [Custom Level], "Scripting", "Active

Scripting" is set to "Prompt" or "Disable".

If the URL includes a scanner name, the scanner will be

connected using an Intranet Zone. If the URL includes an IP

address, the scanner will be connected using the Internet Zone.

In Microsoft® Internet Explorer, in the "Tools" menu, "Internet

Options", try the following settings for the corresponding zone.

• To enable "Active Scripting", set in one of the following

ways:

• In the [Security] tab, set the required "Security level for

this zone" to "Medium".

• In the [Security] tab, click the [Custom Level] button.

Then, set the "Scripting", "Active Scripting" to "Enable".

• If connecting via the Internet zone, on the [Privacy] tab, set

the level to below "Medium High".

• After the above settings have been performed, in

"Temporary Internet Files", press the [Delete Cookies]

button to delete all temporary internet files.

Network Scanner fi-6000NS Getting Started

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix E Troubleshooting

Problem

Check Item

Suggestion

Press the Startup button.

Scanner cannot be

turned on.

Has the Startup button been pressed?

Are the AC cable and AC adapter

properly connected to the scanner?

Connect the AC cable and the AC adapter.

Disconnect the AC cable from the scanner, wait at least

ten seconds, then reattach the cable and turn the power

back on again. If the problem persists, contact your

FUJITSU scanner dealer or an authorized FUJITSU

scanner service provider.

Scanning does not

start.

Has the document been loaded correctly

into the ADF paper chute?

Reload the documents into the ADF paper chute.

Is the ADF completely closed?

Close the top cover completely.

Does the same problem occur after

turning the scanner power off and back

on again, and re-logging in?

If the error status persists, contact your FUJITSU

scanner dealer or an authorized FUJITSU scanner

service provider.

Multifeed errors

occur frequently.

Do the documents satisfy the required

quality conditions?

Use documents which satisfy the quality conditions.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Has the document been loaded correctly

into the ADF paper chute?

Riffle and realign the document stack, then load it back

into the ADF paper chute.

Is the document stack more than 5 mm

thick?

Remove sheets from the stack to reduce it to a thickness

of 5mm or less.

Is the pad assembly dirty?

Clean the pad assembly.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Is the pad assembly worn out?

Replace the pad assembly.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Paper is not fed into

the scanner.

(Pick errors are

Do the documents satisfy the required

quality conditions?

Use documents which satisfy the quality conditions.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

frequent or document

feed stops midway)

Is the pick roller dirty?

Clean the pick roller.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Is the pick roller worn out?

Replace the pick roller.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Is there any foreign matter in the

document feed path?

Clean the document feed path.

Scanned data is

elongated.

Are the feed rollers dirty?

Clean the feed rollers.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Shadow on the

leading edge of the

scanned data.

Are the feed rollers dirty?

Clean the feed rollers.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Vertical line on the

scanned data.

Are the glass scanner windows dirty?

Clean the glass scanner windows.

For more details, refer to "Network Scanner fi-6000NS

Operator's Guide".

Scanned data appears Has the document been loaded correctly? Load the document correctly.

skewed or distorted.

Quality of scanned

data is poor.

Are the glass scanner windows dirty?

Clean the glass scanner windows.

Download from Www.Somanuals.com. All Manuals Search And Download.

Network Scanner fi-6000NS

Getting Started

P3PC-1862-01EN

Date of issuance: May 2007

Issuance responsibility: PFU LIMITED

z Copying of the contents of this manual in whole or in part and

copying of the scanner application is forbidden under the copyright

law.

z The contents of this manual are subject to change without notice.

z PFU LIMITED. is not liable whatsoever for any damages resulting

from use of this scanner and procedures described in this manual,

profit due to defects, and any claims by a third party.

Download from Www.Somanuals.com. All Manuals Search And Download.

Elation Professional Work Light 12 Brick User Manual
Estate Clothes Dryer EED4400W User Manual
Extron electronic Car Satellite TV System 330 D User Manual
Fisher Paykel Oven OB60SL7 User Manual
Frigidaire Oven FGEW2745K User Manual
Frigidaire Refrigerator Artic Air Commerical Glass Door Refrigerator User Manual
Fujitsu Server V610 User Manual
Garmin All in One Printer PRO 4900 User Manual
GE Double Oven JMP28 User Manual
Gitzo Camcorder Accessories GT1550T User Manual