®
Epson Stylus Pro 4900
QUICK REFERENCE GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
Printer Parts
Front
Edge guide
Paper support
Roll paper feeder
Roll paper cover
Spindle holders
Rear manual feeder
Printer cover
Front cover
Print head
Alert light
Control
panel
Cartridge cover (left)
Paper cassette
Ink cartridges
Output tray
Paper eject support
Cartridge cover (right)
Ink maintenance tank
Borderfree maintenance tank
Front manual feeder
Back
Bordless printing spacer
3” Core adapters
Spindle
Rear access panel
AC inlet
Roll paper holder unit connector
Paper stop (gray)
Paper stop (black)
USB interface
Airflow vents
Network interface
Status lights
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Roll Paper
1
7
Slide the black paper stop off the end of the spindle.
Insert the leading edge of the roll paper into the roll
paper feeder until the message on the LCD screen
changes to “Press the button”.
Note: To use paper with a 2-inch core, remove the
gray adapters from the paper stops at each end.
See your User’s Guide for details.
2
Position the roll as shown, then slide it onto the
spindle. The gray end should be on the right with the
paper unwinding from the top.
8
9
Press the button. The printer automatically feeds
the paper to the printing position.
Close the roll paper cover.
3
Slide the black paper stop back onto the spindle and
insert it firmly into the end of the roll.
10 Slide out the output tray. Do not raise the paper
stopper. If the paper stopper is raised while printing,
the paper may not eject correctly.
4
Open the roll paper cover.
5
Place the roll paper in the printer as shown. (The
black end of the spindle goes on the left.)
11 Set up the paper eject support for your paper type (see
your User’s Guide for details)
6
Make sure the printer is turned on, then press the
button on the control panel.
.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing Roll Paper
1
4
Open the roll paper cover.
Remove the black paper stop from the spindle.
2
Press the button. The paper rewinds
automatically.
Note: Make sure the roll paper is rewound before
removing the spindle.
3
Hold both ends of the spindle and lift up from the
spindle holder.
5
6
Remove the roll paper from the spindle.
Place the roll in its original package.
Loading Paper in the Paper Cassette
Make sure the printer is on.
3
If your paper size is A3 or larger, extend the paper
cassette to match the size of the paper.
1
Lift the edge of the output tray to remove it.
4
Slide the edge guides outward.
2
Slide open the paper cassette, lift it slightly and then
pull it out.
5
Thumb through a stack of paper, then
gently tap it on a flat surface to even
the pages.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Loading Paper in the Tray (continued)
6
8
Load the sheets in the portrait orientation, short
edge first, with the printable side face-down. Place
the paper all the way back, against the right side of
the tray.
Insert the paper cassette. Push it firmly into the
printer.
Don’t load paper above the arrow mark inside the
edge guide.
9
Attach the output tray and extend it to fit your
paper size.
Caution: When you add more paper, always line up
the edges with the paper already in the tray.
7
Slide the edge guides against the paper, but not too
tightly.
10 Check the printer’s control panel and press the
paper source button to select the correct media
type, if necessary.
Configuring Auto Nozzle Check and Cleaning
Automatically Checking and
Cleaning the Print Head
Prior to a print job, the printer automatically checks the
nozzles and cleans them if necessary. You can specify how
often you want this to happen.
•
OFF—The printer will not perform automatic
nozzle checks and cleaning cycles.
Note: You can also run nozzle checks and head cleaning
cycles from your computer using Epson Printer Utility4
(Macintosh®) or the Utility tab in your printer driver
(Windows®). See your User’s Guide for more information.
1 Press the Menu button. PRINTER SETUP is
highlighted. Press again.
2 Press until AUTO NOZZLE CHECK is
highlighted, then press .
3 Select one of the following, then press OK:
•
ON: PERIODICALLY—The printer periodically
checks its nozzles and runs a cleaning cycle if
necessary (default setting).
•
ON: EVERY JOB—The printer automatically
checks its nozzles and runs a cleaning cycle if
necessary before each print job. This process
uses a very small amount of ink (and no paper)
and is useful if you are running large print jobs
unattended.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Auto Nozzle Check and Cleaning (continued)
Manually Checking and Cleaning the
Print Head
1
Make sure paper is loaded.
2
3
Press the
button to display the Ink Menu.
Press until NOZZLE CHECK is selected, then
press .
4
Press to select AUTO NOZZLE CHECK, then
press OK to start checking nozzles.
The LCD screen will report any color that has a clog and
prompt if you want to clean it.
If no clog is detected, the message “Nozzle clog was not
detected” will appear on the LCD screen.
Aligning the Print Head
If your prints look grainy or blurry, or you see
misregistration or “ghosting,” you need to align the
print head.
7
Press to highlight AUTO, then press again.
UNI-D (uni-directional) is highlighted. This is the type
of alignment to start with.
1 Make sure the printer is turned on. Load Epson
Enhanced Matte paper. (You can also use Epson
Doubleweight Matte or Ultra Premium Photo Paper
Luster.)
8 Press , then press OK to start the alignment process.
Each head alignment takes about 7 minutes.
Caution: Make sure you don’t open the front cover or
turn off the printer during the alignment process.
2 Press the Menu button.
9 When the uni-directional alignment is finished, press
the Menu button, select HEAD ALIGNMENT,
select ALIGNMENT, then select AUTO.
3 Press the or button until HEAD ALIGNMENT
is highlighted. Then press .
4 Press twice and choose the type of paper you
loaded. Then press , choose a specific paper and
press OK.
10 Select BI-D ALL, press , then press OK to start the
bi-directional alignment.
11 When done, press the
button.
5
Press 3 times.
6
Press to highlight ALIGNMENT.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Ink Levels and Replacing Ink Cartridges
Before you begin a large print job, you should check your
ink levels. If one of your cartridges is low, you can replace
it before you start. Or you can wait until the ink runs
out, replace the cartridge, and then continue the job.
When one of the icons has an X and REPLACE INK
CARTRIDGE is displayed, the cartridge is expended. To
replace the cartridge, first make sure the printer is on.
1 Press the ink compartment cover to open it.
Checking Ink and Maintenance Tank
Levels
The easiest way to check ink levels is from the control
panel. The numbers above the ink cartridge icons
correspond to the 11 cartridge slots in the printer.
Ink gauges for
11 cartridges
listed below
Maintenance
tank gauges
Replacing Ink Cartridges
2 Push in the low or expended cartridge to release it.
When one of the ink icons flashes, and INK LOW is
displayed on the LCD screen, the cartridge is nearly
expended. Check the LCD screen to see which cartridge
is low, and make sure you have the correct replacement
cartridge.
Epson UltraChrome® HDR ink cartridges
Ink Bay
Slot no.
Cartridge
Part no.
Left
1
2
3
4
5
6
7
8
Green (GR)
Light Light Black (LLK)
Yellow (Y)
Light Cyan (LC)
Vivid Light Magenta (VLM)
Orange (OR)
Matte Black (MK)
Vivid Magenta (VM)
Light Black (LK)
Cyan (C)
T653B00
T653900
T653400
T653500
T653600
T653A00
T653800
T653300
T653700
T653200
T653100
3 Remove the expended ink cartridge from the printer.
Warning: Do not shake the expended cartridge, or
ink may leak. If ink gets on your hands, wash them
thoroughly with soap and water. If ink gets in your
eyes, flush them immediately with water.
Right
9
10
11
Photo Black (PK)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking Ink Levels and Replacing Ink Cartridges (continued)
4 Make sure the replacement cartridge is the correct
color and remove it from its package. Gently
shake the cartridge before installing it.
6 Close the ink cover.
5 Hold the cartridge with the
arrow mark pointing toward
the printer. Then insert the
cartridge into the slot. Don’t
force it.
Note: If you can’t insert the cartridge smoothly,
you may have the wrong cartridge or are trying
to insert it into the wrong slot. Check the package
and part number. If the Ink light remains on
after installing the cartridge, try removing and
then reinserting it.
Replacing Printer Parts
4 Use a cross-head screwdriver to remove the four
screws holding the front cover in place, then remove
the front cover.
Replacing the Paper Cutter
If you notice that the paper isn’t cut cleanly, you may
need to replace the cutter (part # C1C815351).
1 Turn off the printer.
2 Open the ink cartridge covers.
3 Open the printer cover.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing Printer Parts (continued)
Replacing the Ink Maintenance Tank
5 Open the cutter cover.
1 Open the right ink cartridge cover.
2 Pull out the maintenance
tank as shown.
6 Loosen the screw holding the cutter in place, then
carefully remove the cutter.
Caution: Do not tilt the
tank or ink may spill out
Warning:The blade is sharp. Be careful when
removing it.
3 Place the used tank in the plastic bag included with
the new tank and dispose of it carefully.
4 Insert the new tank, then close
the cartridge cover.
7 Insert the new cutter. Make sure the cutter pin goes
into the hole. Tighten the screw using a cross-head
screwdriver.
8
Align the cutter cover, then press it in until it snaps
into place.
Replacing the Borderfree Maintenance Tank
1 Remove the output tray.
Note: If optional
SpectroProofer is
installed, remove it.
2 Release the tank lock.
9 Replace the front cover.
Note: If you are using the optional SpectroProofer,
install it without replacing the front cover.
3 Pull out the maintenance
tank as shown.
10 Close the printer cover and ink cartridge covers.
Caution: Do not tilt the
tank or ink may spill out.
Replacing the Maintenance Tanks
The Epson Stylus Pro 4900 has two maintenance tanks:
Ink (part# T619000) and Borderfree (part# T619100).
You need to replace each maintenance tank when the LCD
screen instructs you to do so.
4 Place the used tank in the plastic bag included with the
new tank and dispose of it carefully.
5 Insert the new tank. Push
it in firmly.
1 Check the LCD screen to determine which tank needs
to be replaced (Ink or Borderfree).
6 Set the lock, then replace
Note: The printer will not print if one of the
maintenance tanks is full.
the output tray.
Note:The printer will not
print if the tank is unlocked.
2 Turn off the printer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Menus
Boldface type indicates the default setting. Press the Menu button to access the menus. See theUser’s Guide for details.
Menu
Item
Settings / Explanation
PRINTER SETUP
PLATEN GAP
STANDARD, NARROW, WIDE, WIDER, WIDEST
PAGE LINE
ON, OFF
ROLL PAPER MARGIN
PAPER SIZE CHECK
PAPER SKEW CHECK
REFRESH MARGIN
AUTO NOZZLE CHECK
PRINT NOZZLE PATTERN
CHANGE BLACK INK
AUTO ROLL FEEDING
INITIALIZE SETTINGS
DEFAULT, 3mm, 15m, TOP/BOTTOM 15mm, TOP 35/BOTTOM 15mm
ON, OFF
ON, OFF
ON, OFF
ON: PERIODICALLY, ON: EVERY JOB, OFF
OFF, ON: EVERY PAGE, ON: EVERY 10 PAGES
MANUAL, AUTO
ON, OFF
Restores default settings
TEST PRINT
STATUS SHEET
Printer settings, total prints, and maintenance tank capacity remaining
NETWORK STATUS SHEET
JOB INFORMATION
Network settings
Date andTime and Ink and paper used for the last 10 jobs; most
recent job is number 0
CUSTOM PAPER
Information about registered paper configurations
MAINTENANCE
CUTTER ADJUSTMENT
CLOCK SETTING
Adjusts cutter position
MM/DD/YY HH:MM
PRINTER STATUS
VERSION
Current firmware version
INK LEVEL
Percentage of ink remaining in each cartridge
Percentage of capacity remaining in each maintance tank
MAINTENANCE BOX
JOB HISTORY
Ink in milliliters and paper in square centimeters for each saved job;
most recent job is number 0
TOTAL PRINTS
Number of pages printed
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Control Panel Menus (continued)
PAPER SETUP
ROLL PAPER REMAINING
REMAINING PPR SETUP
ROLL PAPER LENGTH
ROLL LENGTH ALERT
PAPER TYPE
Setting appears only when no paper is loaded
OFF, ON
From 15 to 300 ft
From 4 to 50 ft
Media type loaded in the printer
Paper No 1 to 10
CUSTOM PAPER
PAPER TYPE
Photo, Proofing, Fine Art, Matte, Plain, Others
STANDARD, NARROW, WIDE, WIDER
PRINT
PLATEN GAP
THICKNESS PATTERN
PAPER FEED ADJUST A
PAPER FEED ADJUST B
DRYING TIME
-0.70% to 0.70%
-0.70% to 0.70%
0.0 sec. to 10.0 sec.
PAPER SUCTION
SET ROLL PAPER TENSION
REMOVE SKEW
STANDARD, -1, -2, -3, -4
NORMAL, HIGH, EXTRA HIGH
ON, OFF
HEAD ALIGNMENT
PAPER THICKNESS
PAPER TYPE
Media type loaded in the printer.
PAPER THICKNESS
ALIGNMENT
8 mil (0.2 mm), 4 mil to 60 mil (0.1 to 1.5 mm)
AUTO
UNI-D, BI-D 2-COLOR, BI-D ALL, BI-D #1, BI-D #2, BI-D #3, BI-D #4
UNI-D, BJ-D 2-COLOR, BI-D ALL
MANUAL
NETWORK SETUP
NETWORK SETTINGS
IP ADDRESS SETTING
IP, SM, DG SETTING
BONJOUR
HIDE, SHOW
AUTO, PANEL
IP address, subnet mask, default gateway
ON, OFF
WSD
OFF, ON
INIT NETWORK SETTING
Resets all network settings
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Where To Get Help
SM
Epson Preferred Unit ID number
Service
Access
Date of purchase
Telephone support
Call (888) 377-6611. Make sure you have your
Unit ID number.
Serial number
If you experience any difficulty with the toll-free number or your Unit ID number, call (562) 276-1305.
Internet
Go to epson.com/support to download drivers and firmware, access product documentation and
troubleshooting, and get technical advice through e-mail.
Support for non-Epson RIP
Contact the RIP manufacturer.
Epson and Epson Stylus are registered trademarks and Epson ExceedYour Vision is a registered logomark of Seiko Epson Corporation.
Epson UltraChrome is a registered trademark, ePlaten is a trademark, and Epson Preferred is a service mark of Epson America, Inc.
© 2010 Epson America, Inc.
10/10
11
Download from Www.Somanuals.com. All Manuals Search And Download.
|