24V DRIVE, ULTRA HIGH SPEED LINE THERMAL PRINTER
2” MECHANISM, WITH AVAILABLE CUTTER
FTP-621MCL301/302
■ OVERVIEW
This thermal printer (driven by 24 VDC) and cutter provide high speed
printing for 2- inch wide paper (60 mm). This printer is small in size, light
weight, and has low power consumption. The print head is designed with
open construction for easy maintenance.
This printer is suitable for a variety of applications, such as POS
terminals, ticket machines, label printers, measuring devices and
medical equipment.
In addition to the interface board, a driving LSI (MCU + Gate Array) is
also available.
FTP-621MCL301/302 shown after
assembly with FTP-621CT001cutter
■ HIGHLIGHTS
• Ultra high speed printing
It can print at 100 mm/s (800 dotlines/s) by using Fujitsu
Components' unique head drive control system.
• Auto cutter
Full or partial cutting are available by normal or reverse rotation of
the motor (command set).
• Low power consumption
The peak current for head driving is approximately 3.5 A (at 50 mm/s
printing speed, 50% printing ratio).
FTP-621CU102, FTP-633GA101
• Easy head access
Open head construction makes head maintenance easy, especially
for head cleaning.
• Paper auto loading function
The thermal paper can be loaded without head-up lever operation.
• High resolution
8 dots/mm head provides clear print output.
• Selectable paper paths
Front or rear insertion types are available.
FTP-621MCL302 can print on paper thicknesses of up to 150 µm.
FTP-621DCL012
1
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-621MCL301/302
(Continued)
Item
Specifications
24 VDC ± 5%, average:*2
0.25 (1.29) A (at 25 mm/s printing speed, 25% printing ratio)
0.43 (1.72) A (at 50 mm/s printing speed, 25% printing ratio)
1.66 (3.01) A (at 100 mm/s printing speed, 25% printing ratio)
For head
(
): Peak
Power supply
For motor
For logic
24VDC ± 5%, 1.0 A maximum
5VDC ± 5%, 0.5 A maximum
Weight
Mechanism with cutter: approx. 440 g. Interface board: approx. 100 g
Mechanism + cutter
Interface board
107 (W) × 60 (D) × 71.0 (H) mm (excluding connector)
140 (W) × 89 (D) × 24.0 (H) mm
Dimensions
Pulse durability : 1 × 108 pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Thermal head
Life
Wear resistance : 50 km (at 25% printing ratio)
Cutter
Cutting life: 3 × 105 times
Operating temperature
Operating humidity
Storage temperature
Storage humidity
Head temperature
Paper out/Mark detect
Head-up
+5 to +40°C*3
20 to 85% RH (no condensation)
–20 to +60°C (excluding paper)
5 to 95% RH (no condensation)
By thermistor (applied energy control, abnormal temperature detection)
By photointerrupter (command set)
Environmental
conditions
Detection
By microswitch
+0
Paper width
60 mm
–1
1 ply paper in roll
Thicker paper in roll
:
:
FTP-020P0020
FTP-020PJ102*4
Recommended thermal sensitive
paper*5
*1: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*2: At 25°C, maximum applied voltage, minimum head resistance, specified paper, stable printing ratio.
*3: Temperature range for guaranteed printing density. It can operate at 0 to +40°C.
*4: Printer mechanism FTP-621MCL302 is to be used.
*5: Please contact us for other thermal papers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-621MCL301/302
■ DIMENSIONS
Printer mechanism with cutter
1 1 . 8
2.5 (Mounting hole)
JAPAN
2 5 . 4
35.5 (Mounting hole)
40.5
7.5 (300)
68 (At cutter open)
12
60
Unit: mm
4
Download from Www.Somanuals.com. All Manuals Search And Download.
FTP-621MCL301/302
Interface board
139.7
129.6
113.1
73.7
14.0
22.9
4—ø3.6
(5.1)
CN9
CN3
CN4
CN2
CN7
88.9
78.8
28.0
CN11
25.4
CN5
CN6
CN1
CN10
(5.1)
(5.1)
(5.1)
(5.1)
14.0
31.8
15.3
88.9
17
Height of devices side
Height of soler side
23.6
1.6
5
Unit: mm
■ INTERFACE, COMMAND, OPTIONS
Please refer to the FTP-621DCL002/012 DATA SHEET for Interface, Command, and Options.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|