Fujitsu Personal Computer CELCIUS M V R User Manual
English  
Workstation  
Operating Manual  
CELSIUS M / V / R  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
This manual was produced by Xerox Global Services.  
Published by  
Fujitsu Siemens Computers GmbH  
AG 11/07  
Edition 6  
Order No.: A26361-K990-Z120-1-7619  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Important notes  
Preparing for use  
Operation  
CELSIUS M / V / R  
Troubleshooting  
and tips  
Operating Manual  
System expansions  
Technical data  
Index  
Edition: November 2007  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CELSIUS is a registered trademark of Fujitsu Siemens Computers GmbH.  
Microsoft, MS, MS-DOS, Windows, Windows NT, Windows 2000, Windows Vista and  
Windows XP are registered trademarks of Microsoft Corporation.  
VESA and DPMS are trademarks of Video Electronics Standards Association.  
PS/2 is a registered trademark of International Business Machines, Inc.  
Pentium is a registered trademark of Intel Corporation, USA.  
Kensington Lock and MicroSaver are registered trademarks of ACCO World Corporation.  
All other trademarks referenced are trademarks or registered trademarks of their respective  
owners, whose protected rights are acknowledged.  
Copyright © Fujitsu Siemens Computers GmbH 2007  
All rights, including rights of translation, reproduction by printing, copying or similar methods,  
in part or in whole, are reserved.  
Offenders will be liable for damages.  
All rights, including rights created by patent grant or registration of a utility model or design,  
are reserved.  
Delivery subject to availability. We reserve the right to make technical changes.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Your CELSIUS..................................................................................................................................... 1  
Notational conventions ......................................................................................................................... 2  
Important notes .................................................................................................................................. 3  
Safety notes.......................................................................................................................................... 3  
Transporting the device........................................................................................................................ 3  
Cleaning the device.............................................................................................................................. 3  
Energy saving, disposal and recycling ................................................................................................. 4  
CE mark................................................................................................................................................ 4  
FCC Class B Compliance Statement ................................................................................................... 5  
Preparing for use................................................................................................................................ 7  
Unpacking and checking the delivery................................................................................................... 7  
Steps for initial setup ............................................................................................................................ 7  
Setting up the device............................................................................................................................ 8  
Connect the monitor, mouse and keyboard.......................................................................................... 9  
Connecting monitor ...................................................................................................................... 9  
Connecting the mouse ............................................................................................................... 10  
Keyboard, connecting................................................................................................................. 10  
Connecting the device to the mains voltage....................................................................................... 11  
Switching on for the first time: installing the software......................................................................... 12  
Switching on monitor and device................................................................................................ 12  
Installing the software................................................................................................................. 13  
External devices, connecting.............................................................................................................. 13  
Ports provided by the device...................................................................................................... 14  
Connecting external devices to the parallel or serial port........................................................... 15  
Connecting external devices to the USB ports........................................................................... 15  
Connecting external devices to the FireWire port ...................................................................... 16  
Operation........................................................................................................................................... 17  
Switching the device on...................................................................................................................... 17  
Switching off the device...................................................................................................................... 17  
Indicators provided by the device....................................................................................................... 18  
Keyboard ............................................................................................................................................ 19  
Important keys and key combinations ........................................................................................ 19  
Working with floppy disks ................................................................................................................... 21  
Settings in BIOS Setup....................................................................................................................... 22  
Property and data protection .............................................................................................................. 22  
Anti-theft protection and lead-sealing......................................................................................... 22  
BIOS setup security functions .................................................................................................... 23  
Access authorisation via SmartCard (optional) .......................................................................... 23  
Access protection with SystemLock (optional)........................................................................... 23  
Troubleshooting and tips................................................................................................................. 25  
Troubleshooting.................................................................................................................................. 26  
Power-on indicator remains unlit after you have switched on your device................................. 26  
The device cannot be switched off with the ON/OFF switch ...................................................... 26  
Screen, stays blank.................................................................................................................... 27  
No mouse pointer displayed on the screen................................................................................ 28  
The floppy disk cannot be read or written................................................................................... 29  
Time and/or date is not correct................................................................................................... 29  
Error messages on the screen ................................................................................................... 29  
Installing new software ....................................................................................................................... 29  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
Hard disk contents, restoring ..............................................................................................................30  
Tips ....................................................................................................................................................30  
System upgrades ..............................................................................................................................31  
Information about boards............................................................................................................31  
Opening the casing.............................................................................................................................32  
Closing the casing...............................................................................................................................34  
Opening front panel.............................................................................................................................36  
Closing front panel ..............................................................................................................................37  
Removing the side fan ........................................................................................................................38  
Installing the side fan ..........................................................................................................................39  
Installing front fan (CELSIUS M).........................................................................................................40  
Removing front fan (CELSIUS M).......................................................................................................41  
Removing ventilation duct (CELSIUS V).............................................................................................42  
Installing ventilation duct (CELSIUS V)...............................................................................................43  
Removing ventilation duct (CELSIUS M)............................................................................................44  
Installing ventilation duct (CELSIUS M)..............................................................................................46  
Removing the ventilation duct (CELSIUS R5xx).................................................................................48  
Installing the ventilation duct (CELSIUS R5xx)...................................................................................49  
Removing the cross-piece ..................................................................................................................50  
Installing the cross-piece ....................................................................................................................51  
Removing cover of power supply (CELSIUS M) .................................................................................52  
Installing cover of power supply (CELSIUS M) ...................................................................................53  
Installing and removing a board..........................................................................................................54  
Installing a board.........................................................................................................................54  
Removing a board.......................................................................................................................56  
Low-profile boards...............................................................................................................................58  
Installing and removing drives ............................................................................................................59  
Removing an accessible drive ....................................................................................................61  
Installing an accessible drive......................................................................................................63  
Floppy disk drive - removing and installing.................................................................................64  
Installing and removing the hard disk drive.........................................................................................65  
Installing a hard disk drive ..........................................................................................................65  
Removing a hard disk drive ........................................................................................................66  
Installing/removing a SmartCard reader (optional) .............................................................................68  
SmartCard reader, installing .......................................................................................................68  
Removing a SmartCard reader...................................................................................................70  
Installing and removing a WLAN module (optional)............................................................................72  
Installing WLAN module..............................................................................................................72  
Removing WLAN module............................................................................................................75  
Extensions to the mainboard...............................................................................................................76  
Main memory, upgrading ............................................................................................................76  
Processor, replacing ...................................................................................................................76  
Battery: lithium battery: changing................................................................................................77  
Technical data ...................................................................................................................................79  
Index...................................................................................................................................................81  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Your CELSIUS...  
... is available with various configuration levels with different hardware and software. You can  
incorporate operable drives (for example DVD drive) as well as other boards.  
This manual tells you how to put your device into operation and how to operate it in daily use. This  
manual applies for all configuration levels. Depending on the configuration level chosen some of the  
hardware components described may not be available on your PC. Please observe the notes on your  
operating system.  
Depending on the configuration selected, the operating system is preinstalled on your hard disk (e.g.  
Microsoft Windows Vista).  
Your device has a number of security features to ensure that no unauthorised persons can access  
your data. The security functions in the BIOS Setup also allow you to protect your data by means of  
passwords. In addition, systems with a SmartCard reader offer additional protection.  
Under certain operating systems, DeskUpdate allows you to quickly and easily install the latest drivers  
and operating system upgrades with just a few mouse clicks. DeskUpdate is contained on the  
"Drivers & Utilities" DVD.  
Further information on this device is provided:  
●
●
●
●
●
●
●
in the poster "Getting Started"  
in the "Safety" manual  
in the "Warranty" manual  
in the operating manual for the monitor  
in the manual for the mainboard  
in your operating system documentation  
in the information files (e.g. *.PDF, *.HTML, *.DOC, *.CHM, *.TXT, *.HLP)  
You will find an electronic version of some of the listed manuals on the "User  
Documentation" or "Drivers & Utilities" DVD.  
i
You can access and view the required information using the Acrobat Reader program,  
which is also on the DVD. If necessary, you can also make a print version of the manual.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
1
 
Your CELSIUS...  
Notational conventions  
The following symbols are used in this manual:  
indicates information which is important for your health or for preventing  
physical damage.  
!
indicates important information which is required to use the system properly.  
i
►
Texts which follow this symbol describe activities that must be performed in  
the order shown.  
This font  
indicates programme names, commands, or menu items.  
"Quotation marks"  
indicate names of chapters, data carriers, and terms that are being  
emphasised.  
2
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important notes  
In this chapter you will find information regarding safety which it is essential to take note of when  
working with your device.  
Safety notes  
Pay attention to the information provided in the "Safety" manual and in the following safety  
notes.  
!
During installation and before operating the device, please observe the instructions on  
environmental conditions in the "Technical data" chapter as well as the instructions in the  
"Preparing for use" chapter.  
The ON/OFF switch does not disconnect the device from the mains voltage. To completely  
disconnect the mains voltage, remove the power plug from the power socket.  
The lithium battery on the mainboard should only be replaced in accordance with the  
instructions in the "Extensions to the mainboard" - "Battery: lithium battery: changing"  
chapter.  
Caution, components in the system can get very hot.  
Transporting the device  
Transport all parts separately in their original packaging or in a packaging which protects  
them from knocks and jolts, to the new site. Do not unpack them until all transportation  
manoeuvres are completed.  
!
Cleaning the device  
Turn off all power and equipment switches and disconnect the power plug from the mains  
outlet.  
!
Do not clean any interior parts yourself, leave this job to a service technician.  
Do not use any cleaning agents that contain abrasives or may corrode plastic.  
Ensure that no liquid enters the system.  
Wipe the casing with a dry cloth. If particularly dirty, use a cloth that has been moistened in mild  
domestic detergent and then carefully wrung out. Use disinfectant wipes to clean the keyboard and  
the mouse.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
 
Important notes  
Energy saving, disposal and recycling  
Further information can be found on the "User Documentation" or "Drivers & Utilities" DVD provided  
with your computer.  
CE mark  
CE mark for devices without radio component  
The shipped version of this device complies with the requirements of the EC  
Guidelines 2004/108/EC "Electromagnetic compatibility" and 2006/95/EC "Low  
voltage directive".  
4
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important notes  
FCC Class B Compliance Statement  
The following statement applies to the products covered in this manual, unless otherwise specified  
herein. The statement for other products will appear in the accompanying documentation.  
NOTE:  
This equipment has been tested and found to comply with the limits for a "Class B" digital device,  
pursuant to Part 15 of the FCC rules and meets all requirements of the Canadian Interference-  
Causing Equipment Standard ICES-003 for digital apparatus. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This equipment  
generates, uses and can radiate radio frequency energy and, if not installed and used in strict  
accordance with the instructions, may cause harmful interference to radio communications. However,  
there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
●
●
●
Reorient or relocate the receiving antenna.  
Increase the separation between equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
●
Consult the dealer or an experienced radio/TV technician for help.  
Fujitsu Siemens Computers GmbH is not responsible for any radio or television interference caused  
by unauthorized modifications of this equipment or the substitution or attachment of connecting  
cables and equipment other than those specified by Fujitsu Siemens Computers GmbH. The  
correction of interferences caused by such unauthorized modification, substitution or attachment will  
be the responsibility of the user.  
The use of shielded I/O cables is required when connecting this equipment to any and all optional  
peripheral or host devices. Failure to do so may violate FCC and ICES rules.  
A26361-K990-Z120-1-7619, Edition 6  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Important notes  
6
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparing for use  
Please observe the safety information in the "Important notes" chapter.  
!
Unpacking and checking the delivery  
It is recommended not to throw away the original packaging material! It may be required for  
reshipment at some later date.  
►
►
►
Unpack all the individual parts.  
Check the delivery for damage incurred during transportation.  
Check whether the delivery agrees with the details in the delivery note.  
Should you discover that the delivery does not correspond to the delivery note, notify your local sales  
outlet immediately.  
Steps for initial setup  
Only a few steps are necessary to put your new device into operation for the first time:  
●
●
●
●
Select location for device and set up device  
Connect the monitor, mouse and keyboard  
Check the voltage at the mains outlet and connect the device to an electrical outlet  
Switching the device on  
You will learn more about the individual steps in the following sections.  
External devices  
If you have received other devices in addition to your device (e.g. a printer or a modem),  
do not connect these until after the initial installation. The following sections contain a  
description of how to connect these external devices.  
i
Drives and boards  
If you have received drives or boards with your device, please do not install them until  
after first-time setup. How to install drives and boards is described in the "Fehler! Kein  
gültiges Resultat für Tabelle." chapter.  
i
A26361-K990-Z120-1-7619, Edition 6  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparing for use  
Setting up the device  
When installing your device, give consideration to the safety notes in the "Safety" manual.  
!
The device should only be set up in the intended orientation, i.e. in a vertical position.  
We recommend that you place your device on a surface with good anti-slip qualities. In  
view of the multitude of different finishes and varnishes used on furniture, it is possible that  
the feet of the device will mark the surface they stand on.  
Do not expose the device to extreme environmental conditions (see "Technical data").  
Protect the device from dust, humidity, and heat.  
Make sure that the device is adequately ventilated. In order to avoid overheating, do not  
cover the ventilation area of the monitor or the device.  
Depending on the location of your device, bothersome vibrations and noises may occur.  
To prevent this, a distance of at least 3 mm should be maintained from other devices on  
casing sides without ventilation surfaces. In addition, we recommend placing the device on  
support feet, as these buffer vibrations.  
Screwing on the base foot (CELSIUS V, CELSIUS R6xx)  
To ensure a secure stance, the base foot must be screwed on prior to start-up.  
2
2
1
►
►
Lift the device slightly at the rear.  
Push the base foot under the device in the direction of the arrow (1).  
Make sure that the screw holes for the screws are aligned.  
►
Screw on the base foot with the knurled screws (2).  
8
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparing for use  
Unscrewing the base foot (CELSIUS V, CELSIUS R6xx)  
1
2
1
►
►
Unscrew the knurled screws (1).  
Pull off the base foot in the direction of the arrow (2).  
Connect the monitor, mouse and keyboard  
The ports for the monitor, mouse, and keyboard are on the front and rear of the device.  
Keyboard port, purple  
Monitor port, blue  
USB port, black  
PS/2 mouse port, green  
Connecting monitor  
►
Follow the instructions contained in the monitor manual to prepare the monitor for operation  
(e.g. connecting cables).  
►
►
Plug the data cable into the monitor port of the device.  
Plug the monitor power cable into the grounded mains outlet.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
9
 
Preparing for use  
Connecting the mouse  
Depending on the equipment level selected, your device will be supplied with a PS/2 mouse or a  
USB mouse.  
PS/2 mouse: connecting  
►
Connect the PS/2 mouse to the PS/2 mouse port of the device.  
Connecting USB mouse  
►
Connect the USB mouse to the USB port of the device.  
If you do not attach a mouse at the PS/2 mouse port, you can disable the mouse controller  
in the BIOS Setup in order to free the IRQ12 for a different application.  
i
Keyboard, connecting  
Depending on the equipment level selected, your device will be supplied with a standard keyboard or  
a USB keyboard.  
Connecting standard keyboard  
Use the supplied keyboard cable only.  
►
Plug the rectangular connector of the keyboard cable into the rectangular socket on the  
underside or on the rear of the keyboard.  
►
Plug the round plug of the keyboard cable into the keyboard port on the device.  
Connecting USB keyboard  
Use the supplied keyboard cable only.  
►
Plug the rectangular connector of the keyboard cable into the socket on the underside or on the  
rear of the keyboard.  
►
Insert the flat rectangular USB plug of the keyboard cable into a USB port of the device.  
10  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparing for use  
Connecting the device to the mains voltage  
The device is fitted with a wide voltage range power supply. This means you do not need  
to set the nominal voltage manually for these devices. Therefore there is no switch  
available for the voltage setting.  
i
2
1
►
►
Connect the power cable to the device (1).  
Plug the power plug into a grounded mains outlet (2).  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
11  
 
Preparing for use  
Switching on for the first time: installing the software  
If the device is integrated into a network, the user and server details as well as the network protocol  
are required during the software installation. Contact your network administrator if you have any  
questions about these settings.  
When you switch on the device for the first time, the supplied software is installed and configured.  
Plan a reasonable amount of time for this, as this process must not be interrupted.  
Once the installation has been started the device must not be switched off, unless the  
installation has been completed.  
!
During installation, the device may only be rebooted when you are requested to do so!  
The installation will otherwise not be carried out correctly and the contents of the hard disk  
must be completely restored.  
You may need the licence number for Windows during the installation. The licence number is located  
on a sticker on your device.  
Switching on monitor and device  
►
Switch the monitor on (see the operating manual for the monitor).  
1
►
Press the ON/OFF switch (1) on the front of the device.  
The power-on indicator lights green and the device is started.  
12  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparing for use  
Installing the software  
►
►
During installation, follow the instructions on screen.  
Consult the operating system manual if there is anything unclear about the requested input  
data.  
You will find further information about the system, drivers, utilities, and updates on the  
"Drivers & Utilities" DVD supplied.  
i
External devices, connecting  
Read the documentation on the external device before connecting it.  
!
With the exception of USB devices, always remove all power plugs before connecting  
external devices!  
Do not connect or disconnect cables during a thunderstorm.  
Always take hold of the actual plug. Never unplug a cable by pulling the cable itself.  
Connect and disconnect the cables in the order described below.  
Connecting cables  
►
►
►
Turn off all power and equipment switches.  
Remove all power plugs from the grounded mains outlets.  
Plug all cables into the device and peripherals. You must observe the information provided in  
the "Important notes" chapter.  
►
►
Plug all data communication cables into the utility sockets.  
Plug all power cables into the grounded mains outlets.  
Disconnecting cables  
►
►
►
►
Turn off all power and equipment switches.  
Remove all power plugs from the grounded mains outlets.  
Unplug all data communication cables from the utility sockets.  
Unplug all cables from the device and peripherals.  
USB devices are hot-pluggable. This means you can connect and disconnect USB cables  
while your device is switched on.  
i
Additional information can be found in the "Connecting external devices to the USB ports"  
section and in the documentation for the USB devices.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
 
Preparing for use  
Ports provided by the device  
The connections are located on the front and back of the device. The ports available on your device  
depend on the configuration level you have selected. The standard ports are marked with the  
symbols shown below (or similar). Detailed information on the location of the connections is provided  
in the manual for the mainboard.  
Keyboard port, purple  
Parallel port/Printer, burgundy  
1
2
Serial port 1, teal or turquoise  
Monitor port, blue  
Serial port 2, teal or turquoise  
Microphone jack (mono), pink  
Headphones port, orange or light  
green  
Audio input (Line in), light blue  
SCSI connection  
Audio output (Line out), light green  
USB - Universal Serial Bus, black  
LAN  
LAN port  
1394  
PS/2 mouse port, green  
FireWire™, grey  
Some of the connected devices require special drivers (see the documentation for the  
connected device).  
i
14  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Preparing for use  
Connecting external devices to the parallel or serial port  
External devices can be connected to the parallel or serial port (e.g. a printer or a modem).  
►
►
Connect the data cable to the external device.  
Depending on the device, connect the data cable to the parallel port or the serial port.  
For an exact description of how to connect external devices to the corresponding port, please see  
the external device documentation.  
Port settings  
You can change the port settings (e.g. address, interrupt) in the BIOS Setup.  
i
Device drivers  
The devices connected to the parallel or serial port require drivers. Your operating system  
already includes many drivers. If the required drive is missing, install it. Current drivers are  
usually available on the Internet or will be supplied on a data carrier.  
i
Connecting external devices to the USB ports  
You can connect a wide range of external devices to the USB ports (e.g. printer, scanner, modem or  
keyboard).  
USB devices are hot-pluggable. This means you can connect and disconnect devices  
while your operating system is running.  
i
Additional information can be found in the documentation for the USB devices.  
►
►
Connect the data cable to the external device.  
Connect the data cable to a USB port .  
Device drivers  
The devices you connect to the USB ports usually require no driver of their own, as the  
required software is already included in the operating system. However, if the USB device  
requires its own software, please install it from the data carrier provided with the USB  
device.  
i
To ensure USB 2.0, only a 3 m long cable may be used from the front USB port to the  
USB peripheral device.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
 
Preparing for use  
Connecting external devices to the FireWire port  
External devices such as digital audio/video devices or other high-speed devices can be connected  
to the FireWire port. The FireWire port operates at a speed of up to 400 Mbit per second.  
FireWire devices are hot-pluggable. Therefore, the cables of FireWire devices can be  
connected and disconnected with the system switched on.  
i
Additional information is provided in the documentation of the FireWire devices.  
►
►
Connect this data cable of the external devices to the FireWire port of the device.  
Plug the power cable of the external device into a grounded mains outlet.  
16  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation  
Switching the device on  
►
If necessary, switch the monitor on (see the operating manual for the monitor).  
►
Press the ON/OFF switch on the front of the device.  
The power-on indicator lights green and the device is started.  
Switching off the device  
►
Shut down the operating system properly. In Windows: via the Start menu and the Exit function.  
►
If the operating system does not automatically switch the device into an energy-saving mode or  
switch it off, press the ON/OFF switch.  
The device then consumes a minimum amount of energy.  
The ON/OFF switch does not disconnect the device from the mains voltage. To completely  
disconnect the mains voltage, remove the power plug from the power socket.  
!
►
If necessary, switch the monitor off (see the operating manual for the monitor).  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
17  
 
Operation  
Indicators provided by the device  
The indicators are on the front of the casing. Which indicators are available on your device depends  
on the configuration level you have selected.  
3
5
2
4
1
1 = Hard disk indicator  
2 = Power-on indicator  
3 = Drive indicator, e.g. DVD  
4 = Floppy disk indicator (optional)  
5 = SmartCard reader indicator (optional)  
Hard disk indicator  
The indicator lights up when the hard disk drive of the device is accessed.  
Power-on indicator  
●
The indicator lights up green:  
The device is switched on.  
The display can also light up green if the device has been switched off by  
holding the ON/OFF switch (see "Troubleshooting and tips").  
i
●
The indicator lights up orange:  
The device is ready-to-operate or in energy-saving mode. After being switched on with the  
power button, the device switches on or returns to the state it was in before the energy-saving  
mode.  
In the energy-saving mode the device may not be disconnected from the mains  
supply, as this may otherwise result in data loss.  
!
●
The indicator does not light up:  
The device is switched off.  
18  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation  
Drive indicator, e.g. DVD  
The indicator lights up when the CD-ROM or DVD drive is accessed. You may only remove the DVD  
when the indicator is dark.  
Floppy disk indicator (optional)  
The indicator lights up when the floppy disk drive of the device is accessed. You may only remove  
the floppy disk when the indicator is unlit.  
SmartCard reader indicator (optional)  
The indicator lights up when the SmartCard reader is ready-to-use.  
The indicator flashes when the SmartCard is accessed.  
Keyboard  
1
2
3
4
5
1 = Function keys  
2 = Power button (optional)  
3 = Alphanumeric keypad  
4 = Cursor keys  
5 = Numeric keypad (calculator keypad)  
The illustrated keyboard is an example and may differ from the model you use.  
i
Important keys and key combinations  
The description of the following keys and key combinations applies to Microsoft operating systems.  
Details of other keys and key combinations can be found in the documentation of the relevant  
application programme.  
ON/OFF switch (optional)  
Depending on the setting in the BIOS Setup, the system can be switched on, off, or on  
and off with this button. Some operating systems allow you to configure additional  
functions of the ON/OFF switch in the Control Panel.  
With some keyboards the ON/OFF switch can only be used with an ACPI (Advanced  
Configuration and Power Management Interface). Otherwise the key is inoperative.  
The mainboard must support this function.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
19  
 
Operation  
Enter key  
confirms the marked selection. The enter key is also referred to as the "Return" key.  
Start key  
calls up the Windows Start menu.  
Menu key  
calls up the menu for the marked item (Windows).  
Shift key  
enables upper-case letters and the upper key symbols to be used.  
Alt Gr (e.g. German keyboard)  
produces a character shown on the right-hand side of a key (e.g. the character @ on  
the key Q ).  
Alt Gr  
Num  
Num key  
Switches the numeric key pad between number mode ("Num" indicator lights up)  
and editing mode ("Num" indicator does not light up).  
When the Num Lock indicator is lit the digit and comma keys are active.  
When the Num Lock indicator is not lit the cursor control functions are active in the  
Numeric keypad.  
Ctrl key  
Ctrl  
Starts key combination actions. The Ctrl (Strg) key is also called "Control" or  
"Control key".  
Warm boot  
Del  
Ctrl  
Alt  
+
+
restarts your device. Press simultaneously the keys Ctrl (Strg),  
Alt + Del (Entf). Under some operating systems the Task  
Manager appears first. Then you must press all three keys again  
to re-boot.  
20  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Working with floppy disks  
Follow the instructions supplied by the vendor of the floppy disks.  
i
Do not clean the floppy disk drive with cleaning floppy disks. Any attempt would destroy  
the read/write head in the disk drive within 20 seconds.  
5
7
6
4
1
2
3
3 = Write protection tab for a 1.44 MB floppy disk  
4 = Identification of a 1.44 MB floppy disk or write protect switch on a 120 MB floppy disk  
To insert a floppy disk  
►
Push the floppy disk into the drive in the insertion direction (1) until it engages. The label should  
be facing upward.  
To remove a floppy disk  
Push the eject button (5).  
►
Protect the floppy disk against being overwritten or erased  
Slide the write-protect slider (3) into position (6). The hole is now visible.  
►
The disk is write-protected.  
Deactivate write protection  
►
Slide the write-protect slider (3) into position (7). The hole is now covered.  
The disk is not write-protected.  
A26361-K990-Z120-1-7619, Edition 6  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation  
Settings in BIOS Setup  
In BIOS Setup you can set the system functions and the hardware configuration of the device. When  
the PC is delivered, the default entries are valid (see "BIOS Setup" manual or manual for the  
mainboard). You can customise these settings to your requirements in the BIOS Setup.  
Property and data protection  
Software functions and mechanical locking offer a broad range of functions for protecting your device  
and your personal data from unauthorised access. You can also combine these functions.  
Anti-theft protection and lead-sealing  
1
2
1 = Holes for padlock  
2 = Device for "Kensington Lock"  
Anti-theft protection  
You can protect your device from theft.  
●
with the Kensington Lock device (2) and with a Kensington MicroSaver.  
Consult the manual for your Kensington Lock.  
with the holes (1), a padlock and a chain, which you have connected to a fixed object  
beforehand.  
●
Lead-sealing  
To prevent unauthorised persons from opening the casing, the casing can be sealed. To do this,  
feed the sealing chain through the holes (1) and seal the chain with the lead seal.  
22  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Operation  
BIOS setup security functions  
The Security menu in BIOS Setup offers you various options for protecting your personal data against  
unauthorised access, e.g.:  
●
●
●
●
●
●
Preventing unauthorised access to the BIOS Setup.  
Preventing unauthorised system access  
Preventing system booting from the diskette drive  
Virus warnings, activating  
BIOS: Protecting BIOS from overwriting  
Protecting the device from being switched on by an external device  
You can also combine these functions.  
You will find a detailed description of the Security menus and how to assign passwords in the manual  
for the mainboard or in the "BIOS Setup" manual.  
Access authorisation via SmartCard (optional)  
In systems equipped with a SmartCard reader, access can be restricted to those users who have a  
corresponding SmartCard.  
Access protection with SystemLock (optional)  
With SystemLock you can protect your system from unauthorised booting. Then a system can only be  
booted when the user inserts a valid SmartCard in the SmartCard reader and enters his/her personal  
code number (PIN). To use SystemLock you require the following components:  
●
●
●
External or internal SmartCard reader  
SystemLock installed (see "BIOS Setup" manual)  
SmartCard  
SystemLock controls access to your device. When a SmartCard is initialised, permissions are  
assigned for system access (system, setup, system+setup, admin). You can configure several  
SmartCards for one system and initialise them with different permissions. In addition you can protect  
access to your hard disk.  
In this way users can be divided into user groups. Users of a user group use SmartCards with the  
same permissions.  
More information on SystemLock  
If you also want to use other security software in addition to SystemLock (e.g.  
SMARTY), please read the documentation on your security software beforehand.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
23  
 
Operation  
SystemLock permissions  
You can initialise a SmartCard with one of the following permissions:  
System  
The system starts following entry of the user PIN. You can change the user PIN.  
Setup  
You can open and change the BIOS Setup and change the user PIN.  
System+Setup  
The system starts following entry of the user PIN. You can open and change the  
BIOS Setup and change the user PIN.  
Admin  
The system starts following entry of the user PIN. You can change the user PIN  
an the administrator PIN, unlock locked SmartCards, open and change the  
BIOS Setup and generate additional SmartCards for this system.  
For instructions on how to install and operate SystemLock, and how to initialise SmartCards, see the  
"BIOS Setup" manual.  
SmartCard reader: operating  
●
Operating the internal SmartCard reader  
Depending on the configuration level, the device can be switched on by inserting your SmartCard. If  
the SmartCard reader has been released, the SmartCard reader indicator on the front of the device  
lights green.  
●
Operating the external SmartCard reader  
After the device is switched on, you will be prompted to insert your SmartCard.  
24  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting and tips  
Refer to the safety notes in the "Safety" manual and in the "Preparing for use" chapter  
when connecting or disconnecting cables.  
!
If a fault occurs, try to correct it as described in the following places:  
●
●
●
●
in this chapter  
in the documentation of the connected devices  
in the help systems of the software used  
in the documentation of your operating system  
If you fail to correct the problem, proceed as follows:  
►
►
►
►
Switch the device off.  
Make a note of the steps and the circumstances that led to the fault.  
Make a note of any error messages displayed.  
Note the ID number of your device. The Ident-No. can be found on the type rating plate on the  
back of the casing.  
►
Contact your sales outlet or our customer service centre.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
25  
 
Troubleshooting and tips  
Troubleshooting  
Power-on indicator remains unlit after you have switched on  
your device  
Cause  
Troubleshooting  
The mains voltage supply is faulty.  
►
Check whether the power cable is plugged properly  
into the device and a grounded mains outlet.  
►
►
Switch the device on.  
Internal power supply overloaded.  
Pull the power plug of the device out of the mains  
outlet.  
►
►
Wait for a moment.  
Plug the power plug into a properly grounded mains  
outlet again.  
►
Switch the device on.  
The device cannot be switched off with the ON/OFF switch  
Cause  
Troubleshooting  
The device has not been switched on  
with the ON/OFF switch.  
►
Press the ON/OFF switch again.  
System crash  
►
Press the ON/OFF switch for at least 4 seconds,  
until the device switches off.  
The operating system is not shut-down properly in the  
process. Error messages are therefore possible the next  
time the system is booted.  
26  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting and tips  
Screen, stays blank  
Cause  
Troubleshooting  
Monitor is switched off.  
►
Switch your monitor on.  
Press any key on the keyboard.  
Power saving has been activated  
(screen is blank)  
►
or  
►
Deactivate the screen saver. If necessary, enter the  
appropriate password.  
Brightness control is set to dark  
Power cable not connected  
►
Adjust the brightness control. For detailed  
information, please refer to the operating manual  
supplied with your monitor.  
►
►
Switch off the monitor and the device.  
Check that the monitor power cable is properly  
connected to the monitor and to a grounded mains  
outlet or to the monitor socket of the device.  
►
►
Check that the device power cable is properly  
plugged into the device and a grounded mains  
outlet.  
Switch on the monitor and the device.  
Monitor cable not connected  
►
►
Switch off the monitor and the device.  
Check that the monitor cable is properly connected  
to the device and monitor.  
►
Switch on the monitor and the device.  
Wrong monitor has been set under  
Window XP  
►
►
Restart the device.  
Press F8 while the system is booting.  
Either the Windows Advanced Start Options menu or the  
menu for selecting the operating system appears.  
►
If the menu for selecting the operating system  
appears, press F8 .  
►
►
Select Safe Mode or Safe Mode with Network.  
Set the correct values for the attached monitor as  
described in the operating manual of the monitor by  
selecting Start - Settings - Control Panel - Display and  
then the Appearance, Themes, Settings tabs.  
A26361-K990-Z120-1-7619, Edition 6  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting and tips  
Cause  
Troubleshooting  
Wrong setting for the monitor under  
Windows Vista  
►
►
Restart the device.  
Press F8 while the system is booting.  
Either the Windows Advanced Start Options menu or the  
menu for selecting the operating system appears.  
►
If the menu for selecting the operating system  
appears, press F8 .  
►
►
Select Safe Mode or Safe Mode with Network .  
Set the correct values for the connected monitor, as  
described in the operating manual of the monitor, by  
selecting Start - (Settings) - Control Panel - Display -  
Settings.  
The wrong RAM modules have been  
inserted  
►
See the technical manual for the mainboard for  
information on which memory modules can be used.  
No mouse pointer displayed on the screen  
Cause  
Troubleshooting  
The mouse is not correctly  
connected.  
►
►
►
Shut down the operating system properly.  
Schalten Sie das Gerät aus.  
Check that the mouse cable is properly connected  
to the system unit.  
If you use an adapter or extension lead with the  
mouse cable, check the connections.  
►
►
Make sure that only one mouse is connected.  
Switch the device on.  
The mouse controller is not enabled.  
The mouse controller must be enabled if you use a PS/2  
mouse on the PS/2 mouse port.  
►
Check in the BIOS Setup that the mouse controller is  
Enabled.  
►
Check that the mouse driver is properly installed  
and is present when the application programme is  
started. Detailed information can be found in the  
user guide for the mouse and application  
programme.  
28  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Troubleshooting and tips  
The floppy disk cannot be read or written  
Cause  
Troubleshooting  
The write protection of the floppy disk  
or the floppy disk drive is activated.  
►
Check that the write protection of the floppy disk or  
the floppy disk drive is activated (refer to the "BIOS  
Setup" manual and if necessary to the manual for  
the mainboard).  
The floppy disk drive controller is not  
enabled.  
►
►
Check the relevant entries for floppy disk drive in the  
Main menu of the BIOS Setup.  
Check that the floppy disk drive controller is enabled  
(refer also to the manual for the mainboard or in the  
"BIOS Setup" manual).  
The floppy disk drive is not  
connected.  
►
Check that the cables of the floppy disk drive are  
properly connected (see "Floppy disk drive -  
removing and installing").  
Time and/or date is not correct  
Cause  
Troubleshooting  
The time and date are incorrectly set.  
►
Set the correct time and date within the operating  
system you are using.  
or  
►
Set the correct time and/or date in the BIOS Setup.  
The on-board backup battery in the  
device is flat.  
►
If the time and date are repeatedly wrong when you  
switch on your device, replace the lithium battery  
(see "Battery: lithium battery: changing".)  
Error messages on the screen  
Error messages and their explanation are contained:  
●
●
in the technical manual for the mainboard  
in the documentation for the programmes used  
Installing new software  
When installing programmes or drivers, important files may be overwritten and modified. To be able  
to access the original data in the event of any problems following installation, you should backup  
your hard disk prior to installation.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
 
Troubleshooting and tips  
Hard disk contents, restoring  
Should you need to restore your hard disk, the instructions are provided on the case of the  
"Recovery-CD/DVD" (delivered with your system).  
Tips  
Topic  
Tip  
Out of system resources  
If you have too many applications running at once, you  
may experience problems due to a lack of system  
resources.  
►
Or  
►
Close unnecessary applications.  
Run the applications in a different order.  
Other manuals  
Additional manuals are provided as PDF files on the  
"User Documentation" or "Drivers & Utilities" DVD.  
30  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
As the device has to be shut down in order to install/deinstall system hardware  
components, it is a good idea to print out the relevant sections of this chapter.  
i
It may be necessary to update the BIOS when carrying out a system expansion or  
hardware upgrade. Additional information is contained in the "BIOS Setup" manual or  
possibly in the technical manual for the mainboard.  
When installing components that become very hot, make sure that the maximum  
permissible temperature is not exceeded.  
The devices are very similar to each other. Therefore, only the Celsius V is shown in the  
following illustrations. In case of differences, this will be pointed out at the appropriate  
point.  
The device must be switched off when installing/removing the system expansions and may  
not be in the energy-saving mode.  
!
Remove the power plug before opening the device.  
This chapter describes all the activities required to modify your device hardware (e.g. installing  
boards or drives).  
Read the supplied documentation before installing new drives and/or boards.  
Refer to the technical manual for the mainboard before making any extensions to the mainboard.  
Information about boards  
Take care with the locking mechanisms (catches and centring pins) when you are replacing boards  
or components on boards.  
To prevent damage to the board or the components and conductors on it, please take care when you  
insert or remove boards. Make sure expansion boards are inserted straight.  
Never use sharp objects (screwdrivers) for leverage.  
Boards with electrostatic sensitive devices (ESD) are identifiable by the label  
shown.  
When you handle boards fitted with ESDs, you must, under all  
circumstances, observe the following points:  
●
You must always discharge static build up (e.g. by touching a  
grounded object) before working.  
●
●
●
The equipment and tools you use must be free of static charges.  
Always hold boards with ESDs by their edges.  
Never touch pins or conductors on boards fitted with ESDs.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
 
System upgrades  
Opening the casing  
►
Switch the device off. The device must not be in the energy-saving mode!  
Please take note of the safety information in the "Important notes" chapter.  
Pull the power plug out of the mains outlet.  
!
Only insert the power plug after you have closed the casing.  
►
►
Remove any connected cables in the unit that obstruct you.  
Place the device in a convenient working position.  
Variant A (version with knurled screws)  
►
Unscrew the two knurled screws (1) on  
the back of the casing.  
1
1
32  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
a
►
►
Slide the side cover approximately 2 cm (a) in the direction of the arrow (1), until the stop.  
Pull the side cover in the direction of the arrow (2) of the casing.  
Variant B (version with a locking lever)  
►
Unscrew the locking bolt for the side cover on the rear panel of the casing.  
1
►
Pull the locking lever (1).  
The side panel is now free and can be detached.  
A26361-K990-Z120-1-7619, Edition 6  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System upgrades  
Closing the casing  
Variant A (version with knurled screws)  
a
►
Hook the side cover into the upper and lower guide rail of the casing in the direction of the  
arrow (1).  
Make sure that the side cover is offset by approximately 2 cm (a).  
►
►
Press the side cover onto the casing.  
Push the side cover as far as it will go in the direction of the arrow (2).  
34  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
►
Press the side cover onto the casing (1)  
at the rear and tighten the two knurled  
screws (2) with the other hand.  
2
2
1
►
►
Return the system unit to its original position.  
Reconnect any disconnected cables (power cord, cables to external devices, etc.).  
Variant B (version with a locking lever)  
1
►
►
►
►
►
Hook the side panel into the cutouts in the upper and lower guide rails.  
Close the locking lever in the direction of the arrow (1).  
Tighten the locking bolt for the side cover on the rear panel of the casing.  
Return the system unit to its original position.  
Reconnect any disconnected cables (power cord, cables to external devices, etc.).  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
35  
System upgrades  
Opening front panel  
►
Open the casing (see "Opening the casing").  
1
1
1
2
►
►
►
Detach the three locking tabs on the left side of the front panel (1).  
Fold open the front in the direction of the arrow (2).  
If necessary, detach the hinge on the right-hand side of the front panel from the casing and  
carefully remove the front panel.  
36  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Closing front panel  
2
2
2
1
►
►
If necessary, hook in the hinge on the right-hand side of the front panel.  
Close the front panel in the direction of the arrow (1) so that the three locking tabs on the left-  
hand side of the front panel engage (2).  
►
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
 
System upgrades  
Removing the side fan  
You will need to remove the side fan inside the casing in order to install boards or upgrade the main  
memory.  
a
2
1
►
►
►
►
►
Open the casing (see "Opening the casing").  
Release the side fan by pressing the locking hook (a) in the direction of the arrow (1).  
Pull the bottom edge of the side fan in the direction of the arrow (2) out of the casing.  
Disconnect the cable of the fan from the mainboard.  
Remove the side fan from the casing.  
38  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing the side fan  
1
1
2
a
►
►
Connect the fan cable to the corresponding plug contact on the mainboard (refer also to the  
manual of the mainboard).  
Position the side fan at a slight angle in the direction of the arrow (1) and hook the fan lugs into  
the cutouts on the cross piece.  
►
►
Press the side fan into the casing in the direction of the arrow (2) so that the catch (a) engages.  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
39  
 
System upgrades  
Installing front fan (CELSIUS M)  
You must install a front fan when converting the hard disks to SCSI hard disks.  
Securing front fan on fan bracket  
►
Lay the fan on the fan bracket in the  
direction of the arrow (1).  
When doing so, ensure the proper rotating and  
air-flow direction.  
1
►
Press the fan firmly into the fan bracket until  
it is felt to engage.  
Installing the front fan  
►
►
Open the casing (see "Opening the casing").  
Open the front panel (see "Opening front panel").  
1
2
►
►
Connect the fan cable.  
Insert the fan into the casing in the direction of the arrow (1) so that the lower edge of the fan is  
flush with the bottom of the device.  
Make sure that the power supply cable is not pinched when doing so.  
►
Slightly pull back the green expansion rivet (2) until the tip of the expansion rivet is no longer  
spread.  
40  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
►
►
Press the green expansion rivet (2) into the hole on the casing.  
Secure the fan by pressing the green expansion rivet (2) into the casing until the tip of the  
expansion rivet is spread again.  
►
►
Close the front panel (see "Closing front panel").  
Close the casing (see "Closing the casing").  
Removing front fan (CELSIUS M)  
►
Open the casing (see "Opening the casing").  
►
Open the front panel (see "Opening front panel").  
2
1
►
Detach the green expansion rivet (1).  
Make sure that the green expansion rivet (1) is not pulled off the fan.  
►
►
►
►
►
►
Tilt the fan toward the front in the direction of the arrow (2) and remove it from the casing.  
Disconnect the fan cable.  
Pull the fan cable out of the casing.  
Remove the fan.  
Close the front panel (see "Closing front panel").  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
41  
 
System upgrades  
Removing ventilation duct (CELSIUS V)  
Before you can upgrade the main memory or the processor, or before you can replace the processor  
or the lithium battery, you must remove the ventilation duct.  
1
2
3
►
►
►
Unlock the ventilation duct by pressing locking hooks in the direction of the arrow (1).  
Pull the ventilation duct a few millimetres in the direction of the arrow (2).  
Lift the ventilation duct in the direction of the arrow (3) out of the housing and disconnect the  
fan cables if required.  
When removing the ventilation duct, be careful not to damage the processor cooler(s) on  
the mainboard.  
i
42  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing ventilation duct (CELSIUS V)  
When routing the fan cable, make sure that it is not kinked or pinched.  
i
When fitting the ventilation duct, be careful not to damage the processor cooler(s) on the  
mainboard.  
a
2
1
b
b
►
►
Reconnect the fan cables if required.  
Insert the ventilation duct into the casing in the direction of the arrow (1). When doing so, the  
lower and upper cutouts on the ventilation duct must fit over the designated pins (b) of the  
cross-piece and the power supply duct.  
►
►
Press the ventilation duct into the casing in the direction of the arrow (2) so that the hooks (a)  
are felt to engage.  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
 
System upgrades  
Removing ventilation duct (CELSIUS M)  
Before you can upgrade the main memory or the processor, or before you can replace the processor  
or the lithium battery, you must remove the ventilation duct.  
The ventilation duct is permanently connected to the fan.  
i
1
1
1
a
1
►
Press the lever (a) in the direction of the arrow until the lever unhooks.  
The hooks (1) on the back of the casing release.  
►
Carefully unhook the hooks (1).  
44  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
1  
2
1
►
Pull the ventilation duct and the fan a few millimetres in the direction of the arrow (1) to release  
the hooks at the back of the casing.  
►
►
Remove the ventilation duct and the fan from the casing in the direction of the arrow (2).  
Disconnect the cable of the fan from the mainboard.  
When removing the ventilation duct, be careful not to damage the processor cooler(s) on  
the mainboard.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
45  
System upgrades  
Installing ventilation duct (CELSIUS M)  
►
Pull the fan cable off the fan before the ventilation duct is installed in the device.  
►
Connect the fan cable to the corresponding plug contact on the mainboard (refer also to the  
manual of the mainboard).  
When routing the fan cable, make sure that it is not kinked or pinched.  
i
When fitting the ventilation duct, be careful not to damage the processor cooler(s) on the  
mainboard.  
2
2
3
1
2
a
2
►
Place the ventilation duct and the fan in the casing at a slight angle in the direction of the  
arrow (1). When doing so, the hooks of the ventilation duct must hook into the openings (2) in  
the back of the casing.  
►
►
Push bothersome cables aside if necessary.  
Press the ventilation duct and the fan into the casing in the direction of the arrow (3) until the  
ventilation duct engages noticeably.  
The fan is properly engaged when the locking lug (a) protrudes slightly at the back of the casing.  
►
Connect the fan cable to the fan.  
46  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
a
►
►
Press the lever (a) of the ventilation duct in the direction of the arrow until the lever (a) hooks  
in.  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
System upgrades  
Removing the ventilation duct (CELSIUS R5xx)  
Before you can upgrade the main memory or the processor, or before you can replace the processor  
or the lithium battery, you must remove the ventilation duct.  
1
2
1
►
►
Release the ventilation duct by pressing the locking hooks in the direction of the arrow (1).  
Grasp the ventilation duct by the cutouts and pull it in the direction of the arrow(2) out from the  
casing.  
When removing the ventilation duct, be careful not to damage the processor cooler(s) on  
the mainboard.  
i
If necessary disconnect the cable to the mainboard.  
48  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing the ventilation duct (CELSIUS R5xx)  
When routing the fan cable, make sure that it is not kinked or pinched.  
i
When fitting the ventilation duct, be careful not to damage the processor cooler(s) on the  
mainboard.  
1
►
►
Slide the ventilation duct in the direction of the arrow (1) into the casing until the locking  
hooks noticeably engage.  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
 
System upgrades  
Removing the cross-piece  
To upgrade the main memory or replace the processor you will need to remove the cross-piece.  
b
a
b
2
1
►
Remove the ventilation duct (see "Removing ventilation duct (CELSIUS V)" or "Removing the  
ventilation duct (CELSIUS R5xx)").  
►
►
►
►
►
Remove the side fan (see "Removing the side fan").  
Grasp the cross-piece by the lug (a) and unhook it from the brackets in the casing.  
Pull the cross-piece slightly out of the casing in the direction of the arrow (1).  
Detach the cross-piece from the brackets (b) on the rear of the casing.  
Remove the cross-piece from the casing in the direction of the arrow (2).  
50  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing the cross-piece  
a
a
2
2
1
c
b
►
Insert the cross-piece into its brackets (a) on the rear of the casing at a slight angle.  
Make sure that the plexiglass plate of the cross-piece is not trapped between the memory slots.  
►
Press the cross-piece into the casing in the direction of the arrow (1) until the lugs (b) of the  
cross-piece hook into the brackets (c) in the casing.  
►
►
Install the side fan (see "Installing the side fan").  
Install the ventilation duct (see "Installing ventilation duct (CELSIUS V)" or "Installing the  
ventilation duct (CELSIUS R5xx)").  
►
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
 
System upgrades  
Removing cover of power supply (CELSIUS M)  
On the CELSIUS M the connector P11 is located behind the cover of the power supply. When  
changing the hard disk equipment, you must remove the cover.  
2
3
1
►
►
►
Unscrew the knurled screw (1).  
Pull the cover a few millimetres in the direction of the arrow (2).  
Lift the cover out of the casing in the direction of the arrow (3).  
52  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing cover of power supply (CELSIUS M)  
2
1
3
►
►
►
Insert the cover into the casing in the direction of the arrow (1).  
Slide the cover in the direction of the arrow as far as it will go (2).  
Fasten the cover with the knurled screw (3).  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
 
System upgrades  
Installing and removing a board  
Please take note of the section "Information about boards".  
!
The number, position and arrangement of the board slots on the mainboard can be found in the  
manual for the mainboard. Boards may already be installed on shipment.  
Installing a board  
►
►
►
Open the casing (see "Opening the casing").  
Remove the fan (see "Removing the side fan").  
Remove the cross-piece if it is in the way (see "Removing the cross-piece”).  
1
2
1
3
►
►
►
Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.  
Fold open the locking rail in the direction of the arrow (2).  
Remove the slot cover from the slot (3).  
Do not dispose of the slot cover. For cooling, protection against fire and in order to comply  
with EMC regulations, you must refit the slot cover if you remove the board.  
!
►
►
Take the new board out of its packaging.  
Make the required settings for the board.  
54  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
1
2
2
3
►
►
►
►
Push the board up to its slot (1).  
Press the board into the slot so that it engages.  
If necessary, connect the cables.  
Fold the locking rail (3) closed by pressing the clips (2) through the notches on the casing rear  
panel from the outside until they engage.  
►
►
►
If you have removed the cross-piece, install it now (see "Installing the cross-piece").  
Install the fan (see "Installing the side fan").  
Close the casing (see "Closing the casing").  
If you have installed or removed a PCI board, please check the relevant PCI slot settings in  
the BIOS Setup. If necessary, change the settings. Further information is provided in the PCI  
board documentation.  
The slots 1, 3, 5 and 7 are suitable for low-profile cards with an adapter. The slots are  
counted from the bottom to the top.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
55  
System upgrades  
Removing a board  
►
►
►
►
Open the casing (see "Opening the casing").  
Remove the fan (see "Removing the side fan").  
Remove the cross-piece if it is in the way (see "Removing the cross-piece”).  
Disconnect the cables connected to the board.  
1
2
1
3
►
►
►
►
►
Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.  
If the board in question is a graphics card, undo the catch.  
Fold open the locking rail in the direction of the arrow (2).  
Pull the board out of the slot (3).  
Place the board into appropriate packaging.  
For cooling, protection against fire, and in order to comply with EMC (electromagnetic  
compatibility) regulations, you must refit the slot cover.  
!
56  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
a
1
2
2
3
►
►
Push the slot cover into the slot (1).  
Ensure that the projection (a) on the slot cover engages into the appropriate recess. If it  
does not, you will find it difficult to close the locking rail. There is a danger of damage.  
!
Fold the locking rail (3) closed by pressing the clips (2) through the notches on the casing rear  
panel from the outside until they engage.  
►
►
►
If you have removed the cross-piece, install it now (see "Installing the cross-piece").  
Install the fan (see "Installing the side fan").  
Close the casing (see "Closing the casing").  
If you have installed or removed a PCI board, please check the relevant PCI slot settings  
in the BIOS Setup. If necessary, change the settings. Further information is provided in the  
PCI board documentation.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
57  
System upgrades  
Low-profile boards  
For units with a particularly low overall height, there are so-called low-profile boards with a slot cover  
with a lower overall height to match the low-profile units. To also install these low-profile boards in  
normal board slots, you must mount a corresponding slot adapter beforehand  
Two-piece board slot covers are fitted to the slots intended for low-profile boards. The two pieces are  
connected together with a screw.  
►
►
Remove the desired board slot cover and undo the screw.  
Make the required settings for the board.  
Do not dispose of the slot cover. If you remove the board again, you must reinstall the slot  
cover (cooling, fire protection or EMC regulations to be complied with).  
!
Mounting slot adapter  
►
Fit the slot adapter on the slot cover of the  
low-profile board (1) and screw it on (2).  
1
Now you can install the low-profile board in a  
suitable slot like a normal board (see "Installing a  
board").  
2
Removing slot adapter  
►
Unscrew the screw (1) and remove the slot  
adapter (2).  
2
1
58  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing and removing drives  
The casing can accommodate a total of seven drives:  
●
●
three accessible drives  
(two 5¼" drives and one 3½" drive)  
four non-accessible drives  
(3½" drives)  
"Accessible drives" are e.g. DVD or CD ROM drives, into which a data carrier can be inserted from  
outside. Non-accessible drives are e.g. hard disk drives.  
Serial ATA drives and SCSI drives  
You can install S-ATA drives or SCSI drives/SAS drives (Serial Attached SCSI drives) in your device.  
Your device is equipped with corresponding adapter cables. S-ATA drives are supported by default  
(refer also to the manual for the mainboard). Mixed equipment is also possible. When simultaneously  
installing S-ATA hard disks and SCSI hard disks, you must ensure the proper assignment of the  
cables to the corresponding connectors.  
On the CELSIUS M the connector P11 is located behind the cover of the power supply.  
When changing the hard disk equipment, you must remove the cover (see "Removing  
cover of power supply (CELSIUS M)").  
i
For CELSIUS M only:  
The internal wiring of your device is shown in the following wiring diagrams.  
Wiring diagram for S-ATA drives, SCSI drives or SAS drives (CELSIUS M)  
DVD  
SV  
CD ROM  
FD  
P11  
P5  
HD 1  
HD 2  
SATA  
HD 3  
SCSI  
SAS  
HD 4  
If you only install S-ATA drives, SCSI drives or SAS drives, connect the hard disk connections to the  
connector P11.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
59  
 
System upgrades  
Wiring diagram for mixed equipment with S-ATA and SCSI/SAS drives (CELSIUS M)  
DVD  
SV  
CD ROM  
FD  
P11  
P5  
HD 1  
HD 2  
SATA  
HD 3  
HD 4  
SCSI/SAS  
If you install two S-ATA drives and two SCSI drives or two SAS drives, you must connect the S-ATA  
hard disks to the connector P11 and the SCSI/SAS hard disks to the connector P5.  
60  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System upgrades  
Removing an accessible drive  
►
Open the casing (see "Opening the casing").  
1
2
1
3
►
►
►
Pull the data and the power supply connectors from the desired drive.  
Loosen the screws (1).  
Slide the drive out of the bay in the direction of the arrow (2) from behind.  
The drive now protrudes slightly out of the casing.  
►
►
Slide the drive out of the casing (3).  
If necessary, make the required settings on the remaining hard disk drives.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
61  
 
System upgrades  
2
1
2
►
If you are not installing a new drive, slide the empty slide-in insert into the casing until it  
noticeably engages.  
►
►
Secure the empty slide-in module with the screws (2).  
Close the casing (see "Closing the casing").  
It may be necessary to modify the entry for the remaining drives in the BIOS Setup.  
i
62  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System upgrades  
Installing an accessible drive  
►
►
Open the casing (see "Opening the casing").  
If a slide-in module is fitted, remove this first. To do this, proceed in the same way as when  
removing an accessible drive (see "Removing an accessible drive").  
Do not dispose of the empty slide-in module. For cooling, protection against fire, and in  
order to comply with EMC regulations, you must refit the empty slide-in module if you  
remove the drive again later.  
!
►
►
Take the new drive out of its packaging.  
Make the desired settings on the new drive (if necessary, to the settings of drives already  
installed as well (Master/Slave)).  
2
1
2
►
►
►
►
Slide the accessible drive into the casing as far as the stop (1).  
Plug the data and the power supply connectors into the drive. Make sure the polarity is correct.  
Fasten the drive into place with the screws (2).  
Close the casing (see "Closing the casing").  
It may be necessary to modify the entry for the drive in the BIOS Setup.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
63  
 
System upgrades  
Floppy disk drive - removing and installing  
Removing the floppy disk drive  
►
Remove the floppy disk drive (see "Removing an accessible drive").  
1
2
1
2
►
►
Remove the screws (1) on both sides of the slide-in module.  
Pull the disk drive out of the slide-in module (2).  
Installing the floppy disk drive  
►
Take the new floppy disk drive out of its packaging.  
2
2
►
►
►
Slide the floppy disk drive into the slide-in module (1).  
Fasten the floppy disk drive with the screws (2) on both sides of the slide-in module.  
Install the floppy disk drive (see "Installing an accessible drive").  
64  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing and removing the hard disk drive  
Installing a hard disk drive  
►
►
►
Open the casing (see "Opening the casing").  
Take the new hard disk drive out of its packaging.  
Only for SCSI drives: Make the required settings on the drive.  
►
Secure the EasyChange rails on the side of the  
hard disk by inserting the pins (a) of the  
EasyChange rail in the corresponding holes (b) of  
the hard disk.  
a
b
1
2
1
►
►
Press the EasyChange rails in the direction of the arrows (1).  
Push the hard disk drive into the casing (2) until the EasyChange rails engage.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
65  
 
System upgrades  
►
CELSIUS M only: Remove the cover of the power supply (see "Removing cover of power  
supply (CELSIUS M) ").  
►
►
Connect the data and power supply cables to the hard disk drive or to the hard disk drives.  
CELSIUS M with SCSI hard disk only: Install the front fan (see "Installing front fan (CELSIUS  
M)").  
Removing a hard disk drive  
►
Open the casing (see "Opening the casing").  
1
2
2
1
►
►
Press the EasyChange rails in the direction of the arrows (1).  
Pull the hard disk drive out of the carrier (2).  
66  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
►
►
Pull the EasyChange rails off the hard disk  
drive.  
If necessary, make the required settings on  
the remaining hard disk drive.  
►
►
CELSIUS M only: Install the front fan if necessary (see "Installing front fan (CELSIUS M)").  
Close the casing (see "Closing the casing").  
It may be necessary to modify the entry for the drive in the BIOS Setup.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
67  
System upgrades  
Installing/removing a SmartCard reader (optional)  
You can also install a SmartCard reader in the bay of the floppy disk drive in place of the drive.  
You can install either a WLAN module or a SmartCard reader in your device.  
i
SmartCard reader, installing  
Screwing SmartCard reader onto carrier  
►
►
Push the SmartCard reader - with the  
component side facing downwards - in the  
direction of the arrow (1) into the guide (a).  
2
2
Fasten the SmartCard reader with the  
screws (2).  
a
1
a
SmartCard reader, installing  
►
►
►
Open the casing (see "Opening the casing").  
If necessary, open the front panel (see "Opening front panel").  
Remove the floppy disk drive (see "Removing the floppy disk drive").  
2
1
2
►
►
Slide the SmartCard reader into the slide-in module (1).  
Fasten the SmartCard reader with the screws (2) on both sides of the slide-in module.  
68  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
1
1
►
►
►
Hook the cover into the openings (1).  
Press the cover in the direction of the arrow (2) until the clips engage.  
Install the insert with the SmartCard reader (see "Installing an accessible drive").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
69  
System upgrades  
Removing a SmartCard reader  
►
Remove the insert with the SmartCard reader (see "Removing an accessible drive").  
1
1
2
►
Detach the locking mechanisms (1) and remove the bezel (2).  
1
2
1
2
►
►
Remove the screws on both sides of the slide-in module (1).  
Pull the SmartCard reader out of the slide-in module (2).  
70  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
2
2
►
Install the floppy disk drive again (see "Installing the floppy disk drive").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
71  
System upgrades  
Installing and removing a WLAN module (optional)  
You can install either a WLAN module or a SmartCard reader in your device.  
i
Installing WLAN module  
►
►
Open the casing (see "Opening the casing").  
Open the front panel (see "Opening front panel").  
Initial installation of a WLAN module  
The slot on the WLAN module inside of the front panel is protected by a metal cover when the device  
is shipped.  
►
Break the pre-stamped metal cover (1)  
out of the WLAN opening with a  
screwdriver.  
1
72  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Installing WLAN module  
1
2
2
►
Slide the WLAN module into the slot on the front of the casing in the direction of the arrow (1).  
Make sure that the screw holes for the screws are aligned.  
Fasten the WLAN module with the screws (2).  
►
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
73  
System upgrades  
1
►
►
Thread the USB data cable of the WLAN module through the opening in the direction of the  
arrow (1).  
Connect the USB data cable of the WLAN module onto the corresponding connector on the  
mainboard (also see the manual for the mainboard).  
►
►
Close the front panel (see "Closing front panel").  
Close the casing (see "Closing the casing").  
More detailed information on the use of Wireless LAN can be found in the "Wireless LAN"  
manual.  
i
This manual is provided as PDF file on the "User Documentation" or "Drivers & Utilities"  
DVD.  
74  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System upgrades  
Removing WLAN module  
►
►
►
Open the casing (see "Opening the casing").  
Open the front panel (see "Opening front panel").  
Detach the USB data cable of the WLAN module from the mainboard (see the manual for the  
mainboard).  
2
1
1
►
►
►
►
Loosen the screws (1).  
Pull the WLAN module out of the bay the direction of the arrow (2).  
Close the front panel (see "Closing front panel").  
Close the casing (see "Closing the casing").  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
75  
 
System upgrades  
Extensions to the mainboard  
Details on how you can upgrade the main memory or the processor of your device are provided in  
the manual for the mainboard.  
Main memory, upgrading  
►
►
Open the casing (see "Opening the casing").  
CELSIUS V/R only: Remove the ventilation duct (see "Removing ventilation duct (CELSIUS V)"  
and "Removing the ventilation duct (CELSIUS R5xx)").  
►
►
Upgrade the memory according to the description in the manual for the mainboard.  
CELSIUS V/R only: Install the ventilation duct (see "Installing ventilation duct (CELSIUS V)"  
and "Installing the ventilation duct (CELSIUS R5xx)").  
►
Close the casing (see "Closing the casing").  
Processor, replacing  
►
►
Open the casing (see "Opening the casing").  
Remove the ventilation duct (see "Removing ventilation duct (CELSIUS M)", "Removing  
ventilation duct (CELSIUS V)" and "Removing the ventilation duct (CELSIUS R5xx)").  
►
►
Upgrade the processor according to the description in the manual for the mainboard.  
Install the ventilation duct (see "Installing ventilation duct (CELSIUS M)", "Installing ventilation  
duct (CELSIUS V)" and "Installing the ventilation duct (CELSIUS R5xx)").  
►
Close the casing (see "Closing the casing").  
76  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
System upgrades  
Battery: lithium battery: changing  
In order to permanently save the system information, a lithium battery is installed to provide the  
CMOS-memory with a current. A corresponding error message notifies the user when the charge is  
too low or the battery is empty. The lithium battery must then be replaced.  
Incorrect replacement of the lithium battery may lead to a risk of explosion!  
!
The lithium battery may be replaced only with an identical battery or with a type  
recommended by the manufacturer.  
Do not throw lithium batteries into the household waste. They must be disposed of in  
accordance with local regulations concerning special waste.  
Make sure that you observe the correct polarity when replacing the lithium battery. The  
plus pole must be on the top!  
The lithium battery holder exists in different designs that function in the same way.  
3
2
2
3
1
►
Press the catch in the direction of the arrow (1).  
The battery jumps out of the holder slightly.  
►
►
Remove the battery (2).  
Push the new lithium battery of the identical type into the holder and press it downward until it  
engages.  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
77  
 
System upgrades  
78  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Technical data  
Electrical data  
Regulations complied with:  
EN 60950  
UL 60950  
CSA 22.2 No.950  
I
Protection class:  
Rated voltage range:  
Rated frequency:  
100 V - 240 V  
50 Hz - 60 Hz  
Max. rated current (CELSIUS M):  
100 V – 127 V : 6 A  
200 V – 240 V : 3 A  
100 V – 127 V : 9 A  
200 V – 240 V : 4.5 A  
100 V – 127 V : 7.5 A  
200 V – 240 V : 4.0 A  
100 V – 127 V : 9 A  
200 V – 240 V : 4,5 A  
100 V – 127 V : 12 A  
200 V – 240 V : 6 A  
Max. rated current (CELSIUS V8XX):  
Max. rated current (CELSIUS R5XX):  
Max. rated current (CELSIUS R6XX):  
or:  
Dimensions  
Width/Depth/Height (CELSIUS M / R5xx):  
Width/Depth/Height (CELSIUS V / R640):  
Weight  
215 mm/520 mm/446 mm  
215 mm/620 mm/446 mm  
in basic configuration (CELSIUS M / R5xx):  
in basic configuration (CELSIUS V / R640):  
Environmental conditions  
approx. 24 kg  
approx. 26 kg  
Environment class (3K2)  
Environment class (2K2)  
Temperature  
EC 721 part 3-3  
IEC 721 part 3-2  
Operating (3K2)  
15°C .... 35°C  
-25°C .... 60°C  
Transport (2K2)  
Condensation in operating must be avoided.  
The data sheets of these devices contains further technical data. You will find the data  
sheets on the internet at www.fujitsu-siemens.com.  
i
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
79  
 
Technical data  
80  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Connecting  
device 11  
3
keyboard 10  
mouse 10  
3 1/2-inch drive 60  
PS/2 mouse 10  
standard keyboard 10  
USB keyboard 10  
5
5 1/4-inch drive 60  
Connecting FireWire devices 16  
Connecting standard keyboard 10  
A
Access permission, SmartCard 23  
Accessible drive  
Contents of delivery  
Cover, installing 54  
Cover, removing 53  
Cross-piece 77  
installing 52  
7
installing 64  
removing 62  
Alphanumeric keypad 19  
Anti-theft protection 22  
ATA drive, serial 60  
Audio devices, connecting 16  
Audio input 14  
removing 51  
Ctrl+Alt+Del 20  
Cursor keys 19  
Audio output 14  
D
Data protection 22  
Date  
not correct 30  
Device  
B
Base foot  
screwing on  
unscrewing  
8
9
Anti-theft protection 22  
cannot boot 26  
checking rated voltage 11  
Battery 78  
BIOS setup  
settings 22  
BIOS Setup 22  
cleaning  
3
connecting 11  
Extensions 32  
indicators 18  
lead-sealing 22  
opening 33  
configuration 22  
security functions 23  
system settings 22  
Board 32  
installing 55  
removing 55, 57  
ports 14  
setting up  
8
Button  
ON/OFF switch 20  
switching off 17  
switching on 12, 17  
transporting  
Device drivers  
3
C
Cable  
connecting 13  
disconnecting 13  
Casing  
parallel port 15  
serial port 15  
Devices  
connecting 15  
Disposal  
Drive 60  
closing 36  
lead-sealing 22  
locking 36  
4
accessible 60  
installing 64  
non-accessible drive 60  
removing 62  
opening 33  
CD-ROM drive  
indicator 19  
CD-ROM indicator 19  
CE mark  
Chain 22  
Closing front panel 38  
DVD drive  
indicator 19  
DVD indicator 19  
4
A26361-K990-Z120-1-7619, Edition 6  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Index  
E
Interfaces 14  
Electromagnetic compatibility  
4
EMC, Electromagnetic compatibility 59  
Energy saving  
K
4
Kensington Lock 22  
Key  
Ergonomic, video workstation  
Error  
8
Alt Gr 20  
Control 20  
Ctrl 20  
cursor keys 19  
Enter 20  
enter key 20  
Num 20  
Return 20  
date 30  
device 26  
mouse 28  
screen 27  
time 30  
Error message 30  
ESD 32  
Extensions  
Shift 20  
Device 32  
Key combination 20  
Keyboard 19  
alphanumeric keypad 19  
cursor keys 19  
function keys 19  
numeric keypad 19  
port 9, 10  
mainboard 77  
External devices  
connecting 15  
ports 14  
F
FireWire 14  
FireWire port 16  
Floppy disk  
Keyboard port 14  
Keyboard, connecting 10  
Keys 20  
inserting 21  
removing 21  
working with 21  
write-protection 21  
Ctrl key 20  
Ctrl+Alt+Del 20  
Menu key 20  
Shift key 20  
Start key 20  
write-protection, disabling 21  
Floppy disk drive  
changing 65  
indicator 19  
installing 65  
L
LAN port 14  
Lead-sealing 22  
Line in 14  
Line out 14  
Lithium battery 77  
replacing 78  
removing 65  
Function keys 19  
H
Hard disk contents, restoring 30  
Hard disk drive  
installing 60, 66  
version A 66  
Low voltage directive  
Low-profile boards 59  
4
mounting slot adapter 59  
removing slot adapter 59  
removing 60, 66  
version A 67  
M
replacing 66  
Main memory 77  
Main memory, upgrading 77  
Mainboard, extensions 77  
Manuals, further 31  
Memory  
Headphones 14  
I
Important notes  
Indicators  
3
insufficient 31  
device 18  
Installation  
not enough 31  
Microphone jack 14  
Monitor  
new software 30  
software 12, 13  
switching on for the first time 12  
Installing front fan (CELSIUS M) 41  
connecting  
port  
switching off 17  
9
9
82  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
switching on 12, 17  
PS/2 mouse port 14  
transporting  
Monitor port 14  
Mouse  
3
R
Ready-to-operate 17  
Recycling  
Removing front fan (CELSIUS M) 42  
Replacing  
connecting 10  
error 28  
4
port  
9
Mouse Cursor 28  
Mouse port 14  
lithium battery 78  
Retransportation  
3
N
S
New installation, software 30  
Notational conventions  
Note  
boards 32  
Notes  
Safety notes  
SAS-Drives 60  
Screen  
3
2
no screen display 27  
stays blank 27  
CE mark  
disposal  
energy saving  
important  
recycling  
4
4
SCSI connection 14  
SCSI drive 60  
Securing front fan on fan bracket 41  
Security functions  
BIOS setup 23  
4
3
4
safety  
3
SmartCard 23  
SmartLock 23  
Numeric keypad 19  
Security measures 22  
serial ATA drive 60  
Serial Attached SCSI-Drive 60  
Serial port 14, 15  
connecting devices 15  
settings 15  
O
ON/OFF switch 17, 20  
Opening front panel 37  
Operation 17  
Other manuals 31  
Setup see BIOS Setup  
Side fan  
P
installation 40  
removal 39  
Packing material  
unpacking  
Parallel port 14, 15  
7
7
Signs and symbols  
2
SmartCard reader 69  
indicator 19  
connecting devices 15  
settings 15  
installing 69  
Port  
installing or removing 69  
operating 24  
removing 69, 71  
Software  
SCSI 14  
Power-on indicator 17, 18  
dark 26  
flashes 18  
installing 12, 13  
new installation 30  
Summer time 30  
System expansion 32  
System settings  
BIOS Setup 22  
lights green 18  
lights orange 18  
Power-on LED  
fails to light 18, 26  
Preparing for first use, overview  
7
Preparing for use  
overview  
Printer 14  
Processor 77  
7
7
T
Time  
Processor, replacing 77  
Property protection 22  
PS/2 mouse  
not correct 30  
Time, daylight savings 30  
Tips 25, 31  
connecting 10  
port 9, 10  
Transport  
Trouble  
3
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
83  
Index  
device 26  
V
mouse 28  
screen 27  
Troubleshooting 25  
Ventilation  
Ventilation duct  
installing 44, 47, 50  
8
removing 43, 45, 49  
Video devices, connecting 16  
U
USB  
Video workstation  
8
9
Universal Serial Bus 14  
USB devices  
connecting 15  
USB port 10  
connecting devices 15  
W
Warm boot 20  
WLAN module  
installing 73  
removing 76  
connecting keyboard 10  
connecting mouse 10  
removing and installing 73  
Write protection, floppy disk 21  
84  
A26361-K990-Z120-1-7619, Edition 6  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Echo Pole Saw Pole Pruner User Manual
Electro Voice Speaker EVH 1152D 66 User Manual
Extreme Networks Switch Px Series User Manual
Extron electronic Network Card 134xi User Manual
FIC Laptop M295 User Manual
Firstech LLC Two Way Radio 2W900FMR 2ND 5P User Manual
Fundex Games Games 3872 User Manual
Gefen TV Receiver GTV WHD 1080P SR User Manual
Gemini Musical Instrument UMX 3 User Manual
Global Upholstery Co Indoor Furnishings Stacking Chair User Manual