Fujitsu LifeBook
S Series
BIOS Guide
LifeBook S Series Model:
S6240
Document Date: 6/24/2005
Document Number: FPC58-1353-01
F U J I T S U C O M P U T E R S Y S T E M S
1
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. Follow the instructions for Navi-
gating Through The Setup Utility to make any changes.
(See Navigating Through the Setup Utility on page 2 for
more information)
the field’s function and any special information needed
to help understand the field’s use. Note that the actual
drive labels shown may vary.
System time and date can also be set from
your operating system without using the
setup utility. Use the Date and Time icon
on your Windows Control panel or type
time or date from the MS-DOS prompt.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[02:34:56]
[06/22/2005]
Adjust calendar clock.
Serial ATA Port 0 [FUJITSU MHT2060AT PL-PATA]
Primary Master
[MATSHITADVD-RAM UJ-840S-(PM)]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Language:
[English (US)]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
Serial ATA Port 0:
The product # of
the Serial ATA/IDE
Drive
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Serial ATA Port 0 submenu
allowing additional device configuration options for this interface.
Selects the Serial
ATA Port 0
submenu.
Primary Master:
Language:
Selects Primary
Master submenu
The product # of
the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
■
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
■
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu identifies what Serial
ATA/IDE devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Serial ATA Port 0 [FUJITSU MHT2060AT PL-PATA]
Item Specific Help
Type:
[Auto]
LBA Format
Select Serial ATA/IDE
drive installed here.
Total Sectors:
Maximum Capacity:
117210240
60012MB
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 2. Serial ATA Port 0 Submenu
Menu Field
Options
Default
Description
■
■
Type:
Auto
None
[Auto]
Select Auto to have the type of Serial or Parallel ATA device auto-
matically identified by the BIOS at POST. If None is selected, the fol-
lowing Set-up items do not appear.
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
---
---
Maximum
Capacity:
The maximum capacity of your hard disk
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what primary
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [MATSHITADVD-RAM UJ-840S-(PM)]
Item Specific Help
Type:
[Auto]
Select ATA/ATAPI drive
installed here.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Auto]
The BIOS auto-types the
drive on boot time.
Ultra DMA Mode:
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 3. Primary Master Submenu
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Type:
Auto
None
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the device (CD-
ROM, CD-R/RW, DVD-ROM, etc.) automatically identified by the BIOS
at POST. If None is selected, the following Set-up items do not appear.
■
■
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
[Disabled]
[Disabled]
This option cannot be changed when Auto is selected. Specify the num-
ber of sectors per block for multiple sector transfer.
■
■
■
■
16 Sectors
■
LBA Mode
Control:
Disabled
Enabled
Enables or disables Logical Block Addressing in place of Cylinder, Head,
Sector addressing. This option cannot be changed when Auto is selected.
■
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Table 3: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu
Menu Field
Options
Default
Description
■
Transfer Mode:
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Standard]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
■
■
■
■
■
■
■
■
■
■
■
■
■
Ultra DMA
Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
■
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the
internal hard drive. The boot sequence ignores the new drive designations, however, your application
software will use the new designations.
■
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu or to move to another menu.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
■
Set the I/O addresses for the serial and parallel ports.
Set the features of the keyboard/mouse.
Select between the display panel and/or an external
■
(See Navigating Through the Setup Utility on page 2 for
more information)
■
CRT display.
Set internal device configurations
Configure USB and CPU features.
Configure miscellaneous features such as Wake Up On
■
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function, and any special information
needed to help understand the field’s use.
■
■
LAN.
■
Configure DMI Event Logging.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
Serial/Parallel Port Configurations
Keyboard/Mouse Features
Video Features
Configures serial ports
and parallel ports
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 4. Advanced Menu
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
Serial/Parallel Port
Configurations
When selected, opens the Serial/Parallel Port Configurations submenu which allows the user to modify
settings for serial, infrared and parallel ports.
Keyboard/Mouse Features
Video Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and
internal keyboard and mouse parameters.
When selected, opens the Video Features submenu, which allows setting of the display parameters,
including routing of video signals to different displays.
Internal Device Configurations
CPU Features
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling
the modem, IDE, and LAN Controllers.
When selected, opens the CPU Features submenu, which allows you to change the Intel(R) Speed-
Step(R) Technology settings.
USB Features
Configures USB features.
Miscellaneous Configurations
Event Logging
Configures miscellaneous features, such as Wake Up On LAN and Power Button.
When selected, opens the event logging submenu.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Serial/Parallel Port Configuration Submenu of the Advanced Menu
The Serial/Parallel Port Configuration submenu
provides the ability to set the I/O addresses and
interrupt levels for the serial, infrared, and parallel
ports of your notebook.
I/O addresses, DMA channels, and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices,
serial or parallel, have the same I/O
address assigned your notebook will not
function normally. Please keep a record of
original settings before making any
changes in the event that a restoration is
required. See your hardware and software
documentation as well as the setup utility
to determine settings, limitations, etc.
■
Use of the parallel and serial ports with
this system is possible only with the
optional port replicator.
■
To prevent IRQ and address conflicts,
avoid changing the default settings. If
you must change the settings, you can
call 1-800-8Fujitsu for technical assis-
tance.
■
The BIOS will warn you of resource con-
flicts by placing a yellow asterisk next to
each device that is in conflict.
■
All I/O addresses in Table 5 are in hexa-
decimal.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
Serial/Parallel Port Configurations
Serial Port:
[Enabled]
[3F8-3FF]
[IRQ 4]
[Enabled]
[FIR]
[2E8 - 2EF]
[IRQ 3]
[400-43F]
[DMA 3]
[Enabled]
[Bi-directional]
[378-37F]
[IRQ 7]
[Disabled]
The port is disabled.
I/O Address:
Interrupt:
Infrared Port:
Mode:
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
Parallel Port:
Mode:
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
I/O Address:
Interrupt:
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 5. Serial/Parallel Port Configuration Submenu
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Table 5: Fields, Options and Defaults for Serial/Parallel Port Configuration Submenu of Advanced Menu
Menu Field
Options
Default
Description
■
Serial Port:
Disabled
Enabled
Auto
[Enabled]
Configures the serial port using either no configuration (Disabled), a user
defined configuration (Enabled), or by allowing the BIOS or OS to choose
the configuration (Auto).
■
■
■
■
■
■
I/O Address:
Interrupt:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[3F8 - 3FF]
[IRQ 4]
Allows user to set the serial port base I/O address when serial port is
Enabled.
■
■
■
■
IRQ 3
IRQ 4
IRQ 10
IRQ 11
Allows user to set the serial port interrupt when serial port is Enabled.
■
■
■
Infrared Port:
Disabled
Enabled
Auto
[Enabled]
Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
■
■
Mode:
IrDA
FIR
[FIR]
When the infrared port is enabled this option is available allowing the user
to set the mode for the infrared port. Standard IrDA (IrDA 1.0) transmits
data at up to 115.2 Kbps; FIR (IrDA 1.1) transmits at up to 4Mbps.
■
■
■
■
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF]
Allows user to set the infrared port I/O address when the infrared port is
Enabled.
■
■
■
■
Interrupt:
IRQ 3
IRQ 4
IRQ 10
IRQ 11
[IRQ 3]
Allows user to set the infrared port interrupt when the infrared port is
Enabled.
■
■
■
■
I/O Address:
400-43F
480-4BF
500-53F
580-5BF
400-43F
Allows user to set the FIR port I/O address when the infrared port is
Enabled.
■
■
DMA Channel:
Parallel Port:
DMA 1
DMA 3
[DMA 3]
[Enabled]
Allows user to set the infrared port DMA Channel when the infrared port
mode is set to FIR.
■
■
■
Disabled
Enabled
Auto
Configures the parallel port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
■
■
■
Mode:
Output Only
Bi-directional
ECP
[Bi-directional]
When the parallel port is enabled this option is available allowing the user
to set the mode for the parallel port. Bi-directional allows two-way
transfer of information between your notebook and a parallel device.
Output Only (Half Duplex) allows information to be transferred in only
one direction, from your notebook to the printer or similar device. ECP
Mode allows communication with the ECP class of parallel I/O devices.
■
■
■
I/O Address:
Interrupt:
378 - 37F
278 - 27F
3BC - 3BF
[378 - 37F]
[IRQ 7]
Allows user to set the parallel port base I/O address when the parallel port
is Enabled.
■
■
IRQ 5
IRQ 7
Allows user to set the parallel port interrupt when the parallel port is
Enabled.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and
keyboard.
PhoenixBIOS Setup Utility
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
Item Specific Help
Numlock:
Hot Plug:
[Auto]
[Enabled]
Selects power-on state
for Numlock.
Internal Pointing Device: [Auto Disabled]
Initialization on Resume: [Fast]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Numlock:
Auto
On
Off
[Auto]
Sets the NumLock function state when the computer completes boot-
ing.
■
■
■
On/Padlock Off
■
■
Hot Plug:
Disabled
Enabled
[Enabled]
Enables and disables the ability to plug a mouse or keyboard into
the PS/2 port and have it immediately recognized and active.
■
■
■
■
Internal Pointing
Device:
Auto Disabled
Manual Setting
Always Enabled
Always Disabled
[Auto Disabled]
Sets the device controlling the mouse cursor on the screen. Always
Enabled makes the pointing device always enabled whether there is an
external mouse or not. Always Disabled makes the pointing device
always disabled. Auto Disabled disables the internal pointing device
when an external pointing device is connected to the PS/2 port. Note
that use of the PS/2 port with this system is possible only when using
an optional port replicator.
■
■
Initialization on
Resume:
Fast
Normal
[Fast]
When Fast is selected, initialization for the external devices is
optimized to speed up on Resume. When Normal is selected, initializa-
tion is not optimized.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Video Features
Item Specific Help
[Auto]
Display:
Select display terminal.
Compensation: [Enabled]
* This setting is not
effective after
operating system
starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Display:
Internal Flat Panel
External
Auto
[Auto]
Selects where the video signal will be routed. Note that
the Windows video driver settings override this setting.
■
■
■
■
Compensation:
Disabled
Enabled
[Enabled]
Enables or disables display compensation.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
[Disabled]
Serial ATA Controller: [Enabled]
AHCI COnfiguration: [Disabled]
Serial ATA port is
disabled.
IDE Contoller:
LAN Controller:
Wireless LAN:
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Serial ATA port is
enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Serial ATA Controller:
Disabled
Enabled
[Enabled]
Enables or disables serial ATA devices.
■
■
AHCI Controller:
Disabled
Enabled
[Disabled]
Enables or disables the AHCI (Advanced Host Controller Interface).
This selection does not appear when Serial ATA Controller is dis-
abled.
■
■
IDE Controller:
LAN Controller:
Wireless LAN:
Disabled
Enabled
[Enabled]
[Enabled]
[Enabled]
Enables or disables the IDE port.
■
■
Disabled
Enabled
Enables or disables the LAN controller.
Enables or disables the Wireless LAN device.
■
■
Disabled
Enabled
■
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu allows you to change the settings for Intel(R) SpeedStep(R) Technology for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
CPU Features
Item Specific Help
[Enabled]
[Battery Optimized]
[Maximum Performance]
SpeedStep(R) Technology:
On Battery:
Select Enhanced
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
On AC:
XD Bit functionality:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
SpeedStep(R)
Technology:
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology which allows the
user to determine the CPU performance when the tablet is run-
ning on AC or battery. This technology decreases power consump-
tion by decreasing CPU speeds.
■
■
On Battery:
On AC:
Maximum Performance
Battery Optimized
Automatic
[Battery
Optimized]
Allows the user to select the CPU performance when the system is
running on battery power.
■
■
■
Maximum Performance
Battery Optimized
Automatic
[Maximum
Performance]
Allows the user to select the CPU performance when the system is
running on AC power.
■
■
■
XD Bit
functionality:
Enabled
Disabled]
[Enabled]
Allows the user to enable and disable the Execute Disable
Bit functionality. Execute Disable Bit allows the processor
to classify areas in memory where application code can
and cannot execute. In the event an internet worm
attempts to insert code in the buffer, the processor
disables code execution to prevent damage or worm
propagation.
■
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
USB Features Submenu of the Advanced Menu
The USB Features Submenu enables and disables legacy USB support for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
[Enabled]
[Enabled]
Legacy USB Support:
SCSI SubClass Support:
[Disabled]
The feature is disabled.
[Enabled]
Legacy USB Emulation
is enabled and USB
devices are available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Legacy USB Support:
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is disabled. When
Enabled is selected, legacy USB emulation is enabled and USB
devices are available without USB-aware OS.
■
■
SCSI SubClass Support:
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the SCSI sub-
class in the mass storage class (e.g., USB Memory Key) are enabled.
■
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures the miscellaneous features for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Miscellaneous Configurations
Power Button:
Wake up on LAN:
Volume Setting:
[Disabled]
[Disabled]
[Middle]
Configures the power
button.
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
■
Power Button:
Disabled
Power Off
[Disabled]
When Disabled is selected, the power button does not respond to a
press. When Power Off is selected, the button turns the power off.
■
■
Wake up on LAN:
Volume Setting:
Disabled
Enabled
[Disabled]
[Middle]
When Enabled is selected, the system will wake up when the internal
LAN device receives a Magic Packet while the system is powered off.
■
■
Off
Minimum
Middle
Maximum
Allows you to set or disable the system volume level.
■
■
■
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log
Capacity:
Space Available
Display only.
Event Log Validity:
View Event Log:
Event Logging:
Valid
Display only.
■
Enter
[Enter]
[Enabled]
Allows you to view content of event log.
Turns event logging on and off for all DMI events.
■
Disabled
Enabled
■
■
System Boot
Event:
Disabled
Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Allows you to make all events currently in the event log as read.
■
■
Clear All Event
Logs:
No
Yes
■
■
Mark Events as
Read:
Enter
[Enter]
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs and
to view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup
Utility on page 2 for more information)
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
■
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access
to your secured functions and data.
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
■
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the
password setting process.
Entering a password incorrectly three times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled]to be displayed. If
this happens, restart the computer by
turning off and on the power with the
power switch and use the correct
password on reboot.
■
If the Password on Boot is Disabled you
will not have to type your password
upon resuming the system from the Sus-
pend or Save-to-Disk modes.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length: [0]
[Enter]
[Enter]
Password on Boot:
On Automatic Wake up:
KB Lock on Resume:
Boot from Removable Media:
Flash Write:
[Disabled]
Then password entry is
required to enter BIOS
Setup.
[Disabled]
[Disabled]
[All]
[Enabled]
Hard Disk Security
Owner Information
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 13. Security Menu
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
Set Supervisor
Password
[Enter]
[Enter]
Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to seven characters long and include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New Pass-
word field and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
Set User Password
[Enter]
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
seven characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
Minimum User
[0]
[0]
Sets the minimum length for User Password.
Password Length:
■
Password on Boot:
Disabled
First Boot
Every Boot
[Disabled]
When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read from
a disk. When set to Disabled no password is required. If no Supervisor
Password is set this feature is not available and no password is required.
■
■
■
■
On Automatic
Wake up:
Disabled
Enabled
[Disabled]
[Disabled]
This field is active only when Password On Boot is set to First Boot or
Every Boot. When disabled, password entry is not required on automatic
wake up on LAN or Real Time Clock. When enabled, the password is still
required on automatic wake up.
■
■
KB Lock on
Resume:
Disabled
Enabled
When set to Enabled, the PS/2 keyboard and mouse inputs are locked
out upon Suspend from Resume or Save-to-Disk mode until the pass-
word is entered. When both passwords are set, the User password is
always used to lock. Password entry before OS boot is disabled upon
unattended boot.
■
■
Boot from
Removable Media:
All
[All]
Enable password allows supervisor access only.
Supervisor only
■
■
Flash Write:
Disabled
Enabled
[Enabled]
–—
When disabled, the BIOS Flash memory is write protected.
Hard Disk Security:
–—
–—
When selected, opens the Hard Disk Security submenu, which allows you
to configure hard disk security features.
Owner
Information:
–—
When selected, opens the Owner Information submenu, which allows
you to set Owner information.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Serial ATA Port 0 Password Is:
Primary Master Password Is:
Clear
Not Available
Set Serial ATA Port 0 Password
Set Primary Master Password
[Enter]
[Enter]
Password Entry on Boot:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field
Options
Default
Description
Serial ATA Port 0
Password Is::
---
---
A display-only field. Set is displayed when the Serial ATA Port 0 Password is set
and Clear when it is not.
Primary Master
Password Is:
---
---
---
A display-only field. Not Available is displayed.
Set Serial ATA Port
0 Password
[Enter]
Sets, changes or cancels Serial ATA Port 0 Password. The password may be up to
seven characters long and include only letters or numbers (no symbols). Passwords
are NOT case- sensitive. To cancel a password press the Enter key instead of enter-
ing characters in the Enter New Password field and in the Re-enter New Password
field. When a Serial ATA Port 0 Password is set it must be used to access the hard
disk. Data on the hard disk cannot be read on other systems.
Set Primary
---
[Enter]
Not currently available.
Master Password
■
Password Entry on
Boot:
Disabled
Enabled
[Enabled]
When this is disabled, it is not necessary to enter the password before booting.The
hard disk is still password-protected without entering a password.
■
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set
without having entered a supervisor’s password.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
Press <Enter> key to
set owner information.
Up to 80 characters can
be set. Available
characters are ASCII
codes from 32 through
126.
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
The owner information
is always displayed at
the bottom line of the
screen during POST.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Note: The fields on this submenu cannot be changed unless the Supervisor Password is set.
Menu Field
Options
Default
Description
Owner
–—
Clear
Display only.
Information Is:
Set Owner
Information:
–—
[Enter]
[Gray]
Field to write owner infor-
mation, e.g., your name.
■
■
■
■
■
■
■
■
■
■
■
■
■
Foreground
Color:
Black
Blue
Green
Red
Gray
Light Red
Light Magenta
Yellow
Set foreground color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Cyan
Bright White
■
■
■
■
■
■
■
■
■
■
■
■
■
Background
Color:
Black
Blue
Green
Cyan
Red
Gray
Light Red
Light Magenta
Yellow
[Black]
Sets background color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Bright White
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating Through the
Setup Utility on page 2 for more information)
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Quick Boot:
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
[Enabled]
[Disabled]
[Enabled]
[Enabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Boot Menu
Table 16: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
■
Quick Boot:
Disabled
Enabled
[Enabled]
Turns on and off booting with a truncated set of Power On Self
Tests. (Fewer tests mean faster turn on.)
■
■
Boot Time
Diagnostic Screen:
Disabled
Enabled
[Disabled]
[Enabled]
Turns on and off display of test results instead of Fujitsu logo screen
during Power On Self Test.
■
■
Boot Menu:
Disabled
Enabled
When disabled, the boot menu is disabled and the F12 key is
ignored. When enabled, the boot menu is enabled. Note: This field
cannot be changed unless the Supervisor Password is set.
■
■
Preboot Execution
Environment:
Disabled
Enabled
[Enabled]
__
Turns on and off boot from network server options.
■
Boot Device
Priority:
Selects the Boot Device
Priority submenu
This menu allows setting up the source for the operating system.
See “Boot Device Priority Submenu” in the following section.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the
order of checking of sources for the operating system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Keys used to view or
configure devices:
Network Boot
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 17. Boot Device Priority Submenu
Table 17: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Network Boot*
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the [+]
or [-] key to change the order number for that source. Be sure to save your changed order when you exit the BIOS
setup utility.
* Network Boot only appears if Preboot Execution Environment is enabled.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
■
Be aware of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
■
Booting from a Thumb (Flash) Drive: To boot up the system using a thumb (flash) drive, perform the
following steps (note that a third party utility is required in order to make the USB drive bootable):
1. Insert the drive into a USB port and power up the system.
2. When the Fujitsu logo appears, press the [F2] key.
3. Go to the Boot tab and scroll down to Boot Device Priority and press the [Enter] key.
4. Arrow down to Hard Disk Drive and press the [Enter] key.
5. Arrow down to select the XXXMB Hard Drive (USB).
6. Press the Space bar until the USB Hard Drive moves to the top of the list.
7. Press the [F10] button, then click Yes to exit the setup utility.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your notebook.
The information, including CPU type and
The following table shows the names of the menu fields
for the Info menu and the information displayed in
those fields. These fields are for information purposes
only, and are not editable.
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
BIOS Version:
BIOS Date:
1.06
04/19/2005
BIOS Area:
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M processor 750
1.86 GHz
64 KB
2048 KB
Total Memory:
512 MB
Memory Slot 1: None
Memory Slot 2: 512 MB DDR2 SDRAM
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 18. Info Menu
Table 18: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon your system configuration.
Menu Field
Default
Menu Field
Default
BIOS Version:
1.06
L1 Cache:
64 KB
BIOS Date:
BIOS Area:
CPU Type:
CPU Speed:
04/19/2005
E000h – FFFFh
L2 Cache:
2048 KB
512 MB
None
Total Memory:
Memory Slot 1:
Memory Slot 2:
Intel(R) Pentium(R) M processor 750
1.86 GHz
512 MB DDR2 SDRAM
27
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
S
S e r i e s N o t e b o o k B I O S
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating Through the Setup Utility on page 2 for more information). The following table
shows the names of the menu fields for the Exit menu, the default settings and a description of the field's function and
any special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Save Changes
Save Changes and Power Off
Exit System Setup and
save your changes to
CMOS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 19. Exit Menu
Table 19: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and
then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes]
[No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Discard Changes
Save Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load
previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To
return to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return
to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.
Save Changes
and Power Off
Selecting Save Changes and Power Off will cause the new settings in all menus to be written to the BIOS memory,
then power the system off. The message Save configuration changes and power off now? [Yes]
[No] will be displayed. When confirmed, the setup utility shut down the system.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
|