MEMORY CARD CONNECTORS
(PCMCIA CONFORMABLE)
560H SERIES
■ FEATURES
• The connectors conform to the Japan Electronic Industry
Development Association (JEIDA) and Personal
Computer Memory Card International Association
(PCMCIA) standards Ver. 4.
• Contact pitch of 1.27 mm (0.050 in.) x 1.27 mm (0.050 in.).
Incorrect insertion is prevented. Hot system plugging is
possible (contact detection).
• Plugs have an easy-to-use ejection mechanism.
• Raised mounting type connectors (under which
components can be mounted) and low-profile connectors
are available.
• In addition to connectors for type I and type II cards, a
connector for type III cards has been provided.
• The sockets are of the SMT type. A straddle-type socket for double-sided mounting and a socket for single-sided
mounting are available.
■ PIN CONNECTOR (PLUG) CONTACT LENGTH
■ SPECIFICATIONS
Contact type
Pin No.
Contact length
Specification
Item
Power, ground pins 1, 17, 34, 35, 51, 68 5.0 mm (0.196 in.)
– 55°C to + 85°C
Operating temperature range
Current rating
Card detection pins
Other signal pins
36, 67
Others
3.5 mm (0.137 in.)
4.25 mm (0.167 in.)
DC 0.5 A
AC 250 V
Voltage rating
40 mΩ max (6 VDC, 0.1 A)
1000 MΩ min. (500 VDC)
500 VAC for 1 minute
Industrial environment: 5,000 times
Office environment: 10,000 times
Contact resistance
■ MATERIALS
Insulation resistance
Dielectric withstanding voltage
Insertion/withdrawal life
Specification
Item
Plug body: PPS resin UL94V-0
: 6T nylon (for type III card connector) UL94V-0
Ejector: Polyester
Insulating material
:
PPS resin (for SMT and type III card connectors)
Copper alloy
Conductor
Plating
Contact: Gold over palladium over nickel
(PAGOS)
Terminal: Palladium
Specifications
subject to change
Dimensions are in millimeters (inches)
1
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGH HOLE TYPE (WITH NO EJECTOR, STANDARD TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/C-V4
3 (0.118)
50.8 (2)
2.5mm (0.098)
deep spot facing
41.91 (1.65)
2- ø 2.8 (0.110)
1.27 (0.05)
59.7(2.35)
50.8 (2)±0.1 (0.0039)
No.1
No.2
41.91 (1.65)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
7 (0.276)
1.27 (0.05)
No.17
No.1
No.34
No.51
1.905 (0.075)±0.05 (0.0020)
No.68
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
No.68 Unit: mm (in.)
No.35
•
Models with a board lock (metal fitting for direct mounting) are also available. Part number: FCN-565P068-G/12-V4 (for 1.2 mm (0.047 in.) to 1.6 mm (0.063 in.) thick PC board)
FCN-565P068-G/08-V4 (for 1.0 mm (0.039 in.) thick PC board)
• Long-terminal models are also available.
Part number: FCN-565P068-G/13-V4 (4 mm (0.157 in.))
FCN-565P068-G/02-V4 (10 mm (0.394 in.))
Part number: FCN-565P068-G/17-V4
• Models which support Type III are also available.
FCN-565P068-G/18-V4 (with board lock, for 1.2 mm (0.047 in.) to 1.6 mm
(0.063 in.) thick PC board )
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, LOW-PROFILE TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/01-V4
50.8 (2)
3
(0.118)
4
2.5mm (0.098)
deep spot facing
1.27 (0.05) × (34-1) = 41.91 (1.65)
(0.157)
1.27 (0.05)
3.6 (0.141)
58.7 (2.31)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (34-1) = 41.91 (1.65)
No.1
No.2
41.91(1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
1.27 (0.05)
No.1
No.34
1.905 (0.075) ±0.05 (0.0020)
No.68
3.810 (0.15) ±0.05 (0.0020)
5.715 (0.225) ±0.05 (0.0020)
No.35
No.68
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
(Card insertion side)
Use M2.5 (0.098 in) nut and screws. Screw torque is 3.2 kg/cm.
In order to avoid damage to the connector, do not pull out the card at an angle.
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TO BE MOUNTED ON
THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/F-V4
(2) M2.5 (0.098 in.)
thread nut
59.7 (2.35)
50.8 (2)
7 (0.276)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
2.5
1.27 (0.05)
(0.098)
<To be mounted on back of PC board>
50.8 (2)±0.05 (0.0039)
1.27 (0.05) × (68/2-1) =
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.68
No.35
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
1.27 (0.05)
No.68
No.51
No.35
No.34
2- ø 2.8 (0.110)
No.1
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
No.34
No.17
No.1
(Card insertion side)
• A model with no nuts buried is available. Part number: FCN-565P068-G/H-V4
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, RAISED MOUNTING
TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/J-V4 (SUPPORTS TYPE I, II CARD)
Part number: FCN-565P068-G/J-4V (SUPPORTS TYPE I, II, III CARD)
3 (0.118)
59.7 (2.35)
50.8 (2)
4.5 (0.177)
50.8 (2) ±0.1 (0.0039)
No.1
No.2
7 (0.276)
1.27 (0.05) × (34 – 1) = 41.91 (1.65)
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
1.27 (0.05)
No.1
No.17
No.34
No.68
8.5
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)±0.05 (0.0020)
5.715 (0.225)±0.05 (0.0020)
±0.05 (0.0020)
68- ø 1 (0.039)
2- ø 2.8 (0.110)±0.1 (0.0039)
No.35
53.7 (2.114)
No.51
No.68
(Card insertion side)
• Applicable screw: Self-tapping screw M2.5 (0.098 in.) x 5 mm (0.197 in.) (for 1.6 mm (0.063 in.) thick PC board)
• A model mounted on bottom of a PC board is also available. Part number: FCN-565P068-G16-V4 (supports type I, II)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, SUNK MOUNTING TYPE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P068-G/A-V4
50.8 (2)
2.5mm (0.098)
deep spot facing
1.27 (0.05) × (34–1) = 41.91 (1.65)
3 (0.118)
4.5 (0.177)
1.27 (0.05)
50.8 (2)±0.1 (0.0039)
59.7 (2.35)
1.27 (0.05) × (68/2-1) =
No.1
No.34
41.91 (1.65)±0.1 (0.0039)
6 (0.236)
±0.05 (0.0020)
1.27 (0.05)
1.27 (0.05) × (34–1) = 41.91 (1.65)
1.27 (0.05)
No.17
No.68
No.1
No.34
No.35
1.905 (0.075)±0.05 (0.0020)
3.810 (0.15)
5.715 (0.225)±0.05 (0.0020)
68- ø 1 (0.039)±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
±0.05 (0.0020)
No.35
No.51
No.68
Unit: mm (in.)
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, TWO LAYER STACK TYPE)
■ DIMENSIONS AND PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
Part number: FCN-565P136-G/0-V4
59.7 (2.35)
7
7
(0.276) (0.276)
50.8 (2)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
No.1
±0.1 (0.0039)
= 41.91 (1.65)
No.1
No.35
No.35
±0.05 (0.0020)
1.27 (0.05)
No.34
No.68
No.34
No.68
No.34
No.68
No.34
No.68
No.1
No.35 136- ø 1 (0.039) ±0.05 (0.0020)
No.1
No.35
2- ø 2.8 (0.110)±0.1 (0.0039)
1.905 (0.075)±0.05 (0.0020)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR, WITH GUIDE)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/C34-V4
7
(0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
59 (2.32)
No.1
No.34
Unit: mm (in.)
No.35
No.68
*A 60.48 mm (2.381 in.) model is also available. FCN-565P068-G/C32-V4
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
±0.1 (0.0039)
= 41.91 (1.65)
No.1
No.34
1.27 (0.05) ±0.05 (0.0020)
2- ø 2.8 (0.110)±0.1 (0.0039)
5.715 (0.225) ±0.05 (0.0020)
68- ø 1 (0.039) ±0.05 (0.0020)
±0.05 (0.0020)
3.810 (0.15)
1.905 (0.075) ±0.05 (0.0020)
No.35
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XC-V4 (Type I, II Card, Button color: Black)
Part number: FCN-565P068-G/XC-4V (Type I, II, III Card, Button color: Black)
Part number: FCN-565P068-G/PC-V4 (Type I, II Card, Button color: Beige)
67.31 (2.65)
7 (0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.17 No.18 No.34
No.1
Unit: mm (in.)
No.35
No.51 No.52
No.68
A model with an FG accessory for ESD protection is also available. Specify part number FCN-565P068-G/C23-E4,
instead of FCN-565P068-G/XC-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
No.1
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.2
2- ø 2.8 (0.110)±0.1 (0.0039)
No.3
No.68
34 (1.339)±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
7
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR)
SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/MC-V4 (Button color: Black)
Part number: FCN-565P068-G/C22-V4 (Button color: Beige)
67.31 (2.65)
7 (0.276)
3 (0.118)
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.1 No.17 No.18
No.34
Unit: mm (in.)
No.35
No.51 No.52
No.68
Models with an FG accessory ESD protection are also available. Specify part number FCN-565P068-G/KC-E4 instead of
FCN-565P068-G/MC-V4, or specify FCN-565P068-G/C33-E4 instead of FCN-565P068-G/C22-V4.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.2
2- ø 2.8 (0.110)±0.1 (0.0039)
No.3
No.68
34 (1.339)±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
(Card insertion side)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, TO BE
MOUNTED ON THE BACK OF THE PC BOARD) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/XF-V4 (Button color: Black)
Part number: FCN-565P068-G/PF-V4 (Button color: Beige)
67.31 (2.65)
7 (0.276)
2.5
59.7 (2.35)
50.8 (2)
2.5mm (0.098)
deep spot facing
34 (1.339)
4.8 (0.189)
10 (0.394)
78.5 (3.091)
59 (2.323)
42 (1.654)
35.5 (1.398)
No.35
No.68
No.34
Unit: mm (in.)
No.1
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)±0.1 (0.0039)
1.27 (0.05) × (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.35
Nut buried
No.34
No.1
34 (1.339) ±0.05 (0.0020)
67.31 (2.65)~68.0 (2.677)
Regardless of how the connector is mounted on the PC
board, a card can be inserted with its face upward.
Ejector button
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, SUNK
MOUNTING TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/W-V4
67.31 (2.65)
59.7 (2.35)
50.8 (2)
3 (0.118)
4.5
2- ø 2.8 (0.110)
(0.177)
34 (1.339)
6 (0.236)
2.5 (0.098)
2.1
(0.083)
5 (0.197)
3 (0.118)
10 (0.394)
42 (1.654)
35.5 (1.398)
78.5 (3.091)
No.1
No.17
No.34
No.68
Unit: mm (in.)
No.35
No.51
2.5 (0.098)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1(0.0039)
No.1
No.2
41.91 (1.65)±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
No.3
±0.05 (0.0020)
5.715 (0.225)
2- ø 2.8 (0.110) ±0.1(0.0039)
68- ø 1 (0.039) ±0.05 (0.0020)
3.810 (0.15) ±0.05 (0.0020)
1.905 (0.075) ±0.05 (0.0020)
Unit: mm (in.)
No.68
(Card insertion side)
■ MOUNTING EXAMPLE
Nut
Mounting height
4.5mm(0.177in.)
Nut
M2.5 screw
Unit: mm (in.)
The connector is mounted on a PC board so that only its terminal connection part rests on the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 4.5 MM
(0.177 IN.) RAISED TYPE) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J25-V4 (supports type I, II card)
Part number: FCN-565P068-G/J25-4V (supports type I, II, III card)
59.7 (2.35)
3(0.118)
50.8 (2)
4.5 (0.177)
4.8 (0.189)
10 (0.394)
59 (2.323)
8 (0.315)
42 (1.654)
35.5 (1.398)
No.1
No.34
Unit: mm (in.)
No.35
No.68
8 (0.315)
50.8 (2)
■
PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
■ MOUNTING EXAMPLE
50.8 (2)±0.1 (0.0039)
No.1
1.27 (0.05) × (68/2-1)
No.34
±0.1 (0.0039)
= 41.91 (1.65)
1.27 (0.05) ±0.05 (0.0020)
No.68
68- ø 1 (0.0394) ±0.05 (0.0020)
No.35
4 - ø 2.8 (0.110) ±0.1 (0.0039)
51.7 (2.035) +0
–0
61.7 (2.429)
• Components with a height of 4.3 mm (0.169 in.) maximum can
be installed under the connector.
• Use M2.5 mm (0.098 in.) x 5 mm (0.197in.) self-tapping screws
(when a 1.6 mm (0.063 in.) thick PC board is used) to mount
the connector to the board.
41.7 (1.642) +0
±0.1 (0.0039)
50.8 (2)
Unit: mm (in.)
–0
61.7 (2.429)
Component mounting is prohibited in the hatched areas.
Specifications
subject to change
Dimensions are in millimeters (inches)
11
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT-BUTTON EJECTOR, 5 mm
(0.197 in.) RAISED TYPE, WITH OR WITHOUT FG CLIP) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/0442-E4 (with FG clip)
Part number: FCN-565P068-G/0426-V4 (with no FG clip)
3 (0.118)
5 (0.197)
59.7 (2.35)
50.8 (2)
3 (0.118)
5 (0.197)
59.7 (2.35)
50.8 (2)
12.9
12.9
4.8 (0.189)
4.8 (0.189)
10 (0.394)
10 (0.394)
71.85 (2.83)
59 (2.32)
1.2 (0.047)
71.85 (2.83)
59 (2.32)
1.2 (0.047)
8.5
(0.335)
8.5
(0.335)
42 (1.654)
35.5 (1.398)
No.34
42 (1.654)
35.5 (1.398)
No.34
No.1
No.1
No.35
No.68
No.35
22 (0.866)
No.68
34 (1.339)
22 (0.866) 34 (1.339)
57.51 (2.26)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
61.7 (2.43) –0
61.7 (2.43) –0
50.8 (2) ±0.1 (0.0039)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2–1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05) ±0.05 (0.0020)
1.27 (0.05) ±0.05 (0.0020)
∗2.
∗2.
34 (1.339)±0.1 (0.0039)
22 (0.866) ±0.1 (0.0039)
57.15 (2.25)±0.1 (0.0039)
34 (1.339)±0.1 (0.0039)
22 (0.866)±0.1 (0.0039)
∗2. Component mounting is prohibited in the
∗2. Component mounting is prohibited in the
Unit: mm (in.)
hatched areas.
hatched areas.
• Use M3 mm (0.118 in.) x 5.5 mm (0.217 in.) thread self-tapping screws (when a 1.6 mm (0.063 in.) thick PC board is
used) to mount the connector to the board.
Specifications
subject to change
Dimensions are in millimeters (inches)
12
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT-BUTTON EJECTOR, 4.5 mm (0.177 in.)
RAISED TYPE, WITH FG CLIP FOR ESD PROTECTION) SUPPORTS TYPE I, II CARDS
■ DIMENSIONS
Part number: FCN-565P068-G/J38-E4
3 (0.118)
67.31 (2.65)
59.7 (2.35)
50.8 (2)
34 (1.34)
SMT•FG Clip
4.8 (0.189)
10 (0.394)
78.5 (3.09)
59 (2.32)
8 (0.315)
42 (1.65)
35.5 (1.40)
No.1
No.34
No.35
No.68
2 (0.079)
Unit: mm (in.)
28.45 (1.12)
• Models with a right-button ejector, and with or without an ESD/FG clip are also available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2) ±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
No.1
= 41.91 (1.65) ±0.1 (0.0039)
No.34
1.27 (0.05)±0.05 (0.0020)
No.68
No.35
4 (0.157) ±0.1 (0.0039)
34 (1.34)±0.05 (0.002)
67.31 (2.65)~68.0 (2.68)
29.45 ±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH LEFT EJECTOR BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0221-E4
83.38 (3.28)
40 (1.57)
11
(.433)
35.2 (1.39)
11.2 (.441)
1.8
(.071)
R1.4
40 (1.574)
1 (.039)
1 (.039)
11 (.433)
8 (.315)
5 (.197)
10.5 (.413)
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002
)
6-0 (.236-0)
5-0(.197-0)
4.4-0 (.173-0)
9.5-0 (.347-0)
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2
NOTE 3
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
1.905±0.05 (.075±0.002
)
3.810±0.05 (.150±0.002
5.715±0.05 (.225±0.002
)
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Note 2
)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
14
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, 5 mm (0.197 in.)
RAISED TYPE, WITH ESD CLIPS
■ DIMENSIONS
Part number: FCN-565P068-G/0231-E4
11 (.433)
8 (.315)
10.5 (.413)
5 (.197)
1 (.039)
40 (1.574)
1 (.039)
11.2 (.441)
35.2 (1.39)
40 (1.57)
1.8
(.071)
83.38 (3.28)
11
(.433)
0.51(0.020)
1.905 (0.075)
3.810 (0.150)
5.715 (0.225)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
40±0.1 (1.57±.002
)
6-0 (.236-0)
5-0(.197-0)
4.4-0 (.173-0)
9.5-0 (.347-0)
Note 3
PCB Foot Print Viewed
from Connector Side
NOTE 2
NOTE 3
COMPONENT CON NOT BE
MOUNTED IN THIS AREA
COMPONENTS THAT HAVE
5mm HEIGHT CAN BE
MOUNTED IN THIS AREA
1.905±0.05 (.075±0.002
)
3.810±0.05 (.150±0.002
5.715±0.05 (.225±0.002
)
NOTE 4
UNLESS OTHERWISE SPECIFIED
TOLERANCES ARE ±0.5mm (0.002 in.)
Note 2
)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
RIGHT-ANGLE PLUG, THROUGHHOLE TYPE (WITH RIGHT EJECT BUTTON, TWO LAYER EJECT TYPE)
■ DIMENSIONS
Part Number: FCN-565P136-G/Z-V4
67.31 (2.65)
7
7
59.7 (2.35)
50.8 (2)
(0.276)
(0.276)
34 (1.34)
Connector with the left and right ejector
buttons
Part Number: FCN-565P 136G/005-V4
67.31 (2.65)
7
7
59.7 (2.35)
50.8 (2)
(0.276) (0.276)
34 (1.34)
4.8 (0.189)
4.8 (0.189)
10 (0.394)
78.5 (3.09)
59 (2.32)
42 (1.65)
No.1
No.35
No.34
No.68
35.5 (1.40)
4.8 (0.189)
4.8 (0.189)
10
(0.394)
10
(0.394)
42 (1.654)
42 (1.654)
35.5 (1.398)
No. 1
35.5 (1.398)
No. 34
No. 68
No.35
No.1
No.68
No.34
No. 35
No. 1
No. 68
No. 35
Unit: mm (in.)
Unit: Nom. 34 m (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
50.8 (2)±0.1 (0.0039)
1.27 (0.05) × (68/2-1)
= 41.91 (1.65) ±0.1 (0.0039)
1.27 (0.05)±0.05 (0.0020)
No.1
No.35
No.34
No.68
No.34
No.68
No.1
No.35
±0.1 (0.0039)
4- ø 2.8 (0.110)
34 (1.339)±0.05 (0.0020)
67.31 (2.65)±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
FCN-560A*** EJECTORS FOR FCN-564/565 HEADERS
■ DIMENSIONS
Button
ESD
Right Button
FCN-560A08
FCN-560A14
11 (.433)
Color
25 (.984)
50.6 (1.99)
7 (.275)
BLACK
7.22 (.284)
BEIGE
8 (.315)
2.1 (.083)
4 (.157)
Unit: mm (in.)
Button
ESD
Left Button
FCN-560A16
FCN-560A22
Color
8 (.315)
4 (.157)
2.1 (.083)
BLACK
BEIGE
7.22 (.284)
25 (.984)
50.6 (1.99)
7 (.275)
11 (.433)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE LOW PROFILE
■ DIMENSIONS
Part number: FCN-564P068-G/A-V4
59.74 (2.35)
5.715 (0.225)
1.905 (0.075)
1.27 x (34-1) = 41.9 (1.65)
1.27 (0.05)
No.1
No.17
No.51
No.34
No.68
No.35
7.00 (.276)
44.80 (1.76)
51.80 (2.039)
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
1.27 x (68/2-1) = 41.91 (1.65)±0.1 (0.0039)
No.1
±0.05 (0.0020)
1.27 (0.05)
No. 35
No.68
51.8 (2.039)±0.1 (0.0039)
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH NO EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/0-V4
Polarization Post
74 (2.91)
66.04 (2.6)
5.715 (0.225)
1.905 (0.075)
50.8 (2)
41.91 (1.65)
1.27 (0.05)
59.7 (2.35)
41.91 (1.65)
7 (0.394)
1.27 (0.05)
No.1
No.17
No.34
No.68
No.51
No.35
Unit: mm (in.)
• A model with the feature of preventing mismated board mounting is available. Contact Fujitsu.
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
±0.05 (0.0020)
No.2
1.27 (0.05)
No.3
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
19
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
STRAIGHT PLUG, THROUGHHOLE TYPE (WITH EJECTOR)
■ DIMENSIONS
Part number: FCN-564P068-G/X0-V4
74 (2.91)
67.31 (2.65)
66.04 (2.6)
4 (0.157)
34 (1.34)
5.715 (0.225)
50.8 (2)
41.91 (1.65)
1.905 (0.075)
2 – Ø 2.8 (0.110)
1.27 (0.05)
4.8 (0.177)
10 (0.394)
78.5 (3.09)
42 (1.653)
35.5 (1,40)
No.1
No.17
No.51
No.34
No.68
No.35
Unit: mm (in.)
■ PC BOARD MOUNTING HOLE LAYOUT (MOUNTING SIDE)
66.04 (2.6)±0.1 (0.0039)
No.1
41.91 (1.65) ±0.1 (0.0039)
No.2
1.27 (0.05)±0.05 (0.0020)
No.3
No.68
Unit: mm (in.)
Specifications
subject to change
Dimensions are in millimeters (inches)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
560H Series Connector Conforming to Ver. 4
Europe
Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141-0022, Japan
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Fujitsu Components
International
Headquarter
Offices
Asia Pacific
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Tel: (65) 6375-8560
Fax: (1-408) 745-4970
Fax: (65) 6273-3021
Email: [email protected]
Email: [email protected]
© 2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the prop-
erty of their respective owners. Fujitsu Components America, Inc. or its affiliates do not warrant that the content of the
datatasheet is error free. In a continuing effort to improve our products, Fujitsu Components America, Inc. or its
affiliates reserve the right to change specifications/datasheets witout prior notice. Rev. November 2, 2007.
Specifications
subject to change
Dimensions are in millimeters (inches)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|