Usefull Phone Numbers
PS-79Ci
PS-79Ci
Europe
00-800-1810-1810
Japan
+81-(0)-3-5496-2401
+60-(0)-35122-1231
+65-6221-3811
Malaysia
Espana
+34-91-748-05-01
Singapore
United Kingdom
+44-(0)-1302-836836
Please read these instructions before use.
Do not discard: keep for future reference.
1789 Norwood Avenue, Itasca, Illinois 60143-1095 • USA • 630-893-1600
felllloowweess..ccoom
Australia
Benelux
Canada
China
Deutscchland
España
France
Italia
Japan
Korea
Polska
Singaapore
United Kingdom
Unitedd States
felllloowwess..com
2008 Fellowes, Inc. Part No. 403321
Download from Www.Somanuals.com. All Manuals Search And Download.
12
®
Technology
B. Paper entry
G. Disconnect power switch
J. Overheat (red)
K. Bin open (red)
L. Bin full (red)
uto correcting button (blue)
R. On/off (blue)
®
C. See safety instructions
D. CD/Card flap
M. Remove paper (red)
®
indicator (yellow)
A
UT
TO
O
O. Sheet capacity indicator
Will shred: Paper, credit cards, CD/DVD’s, staples and small paper clips
Maximum:
Sheets per pass
CDs/Cards per pass
Paper entry width
12*
1*
9” (230mm)
Will not shred: Adhesive labels, continous form paper, transparencies, newspaper,
cardboard, large paper clips, laminates, file folders, X-rays or plastic other than noted
above
*8.5”x11”, 20lb., (75g) paper at 120V, 60 Hz, 4Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended daily usage rates:
Paper shred size:
Cross-Cut
5/32” x 1-1/2” (3.9 x 38mm)
25–50 shredding passes per day, 25 credit cards; 10 CDs.
12 sheets per pass.
Fellowes SafeSense® shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
Jam Proof System
® Technology
Stops shredder immediately when
hands are too close to the paper entry.
SilentShredTechnology
SilentShred™ noise quality
shreds without noisy disruptions
Eliminates frustrating jams by
preventing overloads and powering
through misfed paper.
TECHNICAL EXPLANATION
TECHNICAL EXPLANATION
TECHNICAL EXPLANATION
Sheet capacity indicator tells you
when you have too many or too few
sheets to maximize productivity
Shredder will stop automatically and
indicator will light up when hands
are too close to the paper entry
SilentShred™ motor
features whisper-quiet,
efficient shredding
performance without
the noisy disruptions
1
Shredder will resume normal
operation when hands are no
longer near the paper entry
Shredder will not operate when too many
sheets are fed into paper entry (red
light). Reduce sheet quantity and refeed
1
2
Flashing indicator warns when
technology has been
shut off
If misfed, shredder will automatically
adjust to power through or reverse
out paper
®
12
• Keep away from children and pets. Keep hands away from paper
entry. Always set to off or unplug when not in use.
• This shredder has a Disconnect Power Switch (G) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
AU
TO
AUTO
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away
from shredder openings. If object enters top opening, switch to
Reverse ( ) to back out object.
• Avoid touching exposed cutting blades under shredder head.
• Rotate CD flap entry for shredding CDs/cards. Keep finger away from
CD hole. Jam Proof System is disabled when flap is in CD position.
• Never use aerosol products, petroleum based lubricants or other flammable
products on or near shredder. Do not use canned air on shredder.
• Do not put foreign objects in paper entry.
• Do not use if damaged or defective. Do not disassemble shredder. Do
not place near or over heat source or water.
• The grounded socket-outlet shall be installed near the equipment and shall be
easily accessible.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
CASTER INSTALLATION
1
3
4
5
PAPER OR CD/CARD
1
2
4
5
6
12
12
12
AU
T
O
AUT
O
AUT
O
Continuous operation:
12-minute maximum
Plug in and put
CD flap into place
Hold CD/card at edge,
feed into CD/Card flap
entry and release
shredding set
Press ( ) ON to
activate (blue)
disconnect power
paper entry and release
Shredder runs briefly
after each pass to clear entry.
Continuous operation beyond
12-minutes will trigger
switch in ON (I) position
to OFF (
)
20-minute cool down period.
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
SET-UP AND TESTING
MISFED PAPER
3
3
2
2
12
AUTO
O
1
1
If Remove Paper icon (
illuminated, press reverse and
remove paper
) is
If too many sheets, indicator will
light up to red and shredder will
not take paper
shredder will take the paper
Automatic correcting action
will power through the misfed
paper, so shredding can
continue (do not add more
paper during flashing)
12
12
AUT
O
AUTO
O
Feed into paper entry
If paper is misfed and
stops shredding, all
indicator lights will
illuminate and shredder
will pause for 3-6
seconds
3
2
2
3
12
12
AUTO
O
AU
TO
Shredder will take fewer sheets,
but if indicator is below yellow,
you can add more sheets without
fear of jamming
being fed up to the top yellow light
to maximize your productivity
If there is too much paper for
the shredder to power through,
it will reverse the paper out for
easy removal
Reduce paper quantity to an
acceptable amount and refeed into
paper entry
*100% Jam Proof when used in accordance with user manual
3
Download from Www.Somanuals.com. All Manuals Search And Download.
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
4
3
2
Stops shredder immediately when hands are too close to the paper entry.
12
12
AUT
O
SET-UP AND TESTING
FLASHING INDICATOR
AUTO
O
1
2
3
1
2
3
*Apply oil across entry
Press forward
Shred one sheet
Press and hold forward (
2-3 seconds
)
2
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
AU
U
AU
TOO
TO
• All cross-cut shredders require oil for peak performance. If not oiled, a machine may experience diminished sheet capacity, intrusive noise when shredding and could
ultimately stop running. To avoid these problems, we recommend you oil your shredder each time you empty your waste bin.
®
®
Turn the shredder ON
Touch test area and
look for the SafeSense
indicator to illuminate
SafeSense is active and
working properly
SafeSense is deactivated when
Shift override switch to
the “active” position,
Confirm the indicator is no longer
flashing and retest by putting
your hand on the test area
®
®
(
) to activate SafeSense
indicator is flashing
®
reactivating SafeSense
Paper detection sensors are designed for maintenance free operation. However, on rare occasions the sensors may become blocked by paper dust causing the motor to run
even if there is no paper present (Note: two paper detection sensors are located in the center of the paper entry)
TO CLEAN THE SENSORS
2
3
4
5
12
12
AUT
O
Eliminates frustrating jams by preventing overloads and powering through misfed paper.
AU
TO
AU
TO
DISABLING THE FEATURE
Turn off and unplug
shredder
Lift CD flap
Locate Auto-start
infared sensor
Dip cotton swab in
rubbing alcohol
Using cotton swab, wipe
away any contamination
from the paper sensors
4
5
2
3
1
12
12
12
AU
TO
AUT
O
AUT
O
AUTO
AUTO
• Run shredder once a day in reverse for 15 seconds to clear cutters
Should you choose to disable Once disabled, the blue
If jam occurs, press and
hold forward ( ) key until
the document is completely
through the shredder
If not cleared, press
reverse ( ) briefly
(repeat steps 4 and 5
until shredded)
If steps 4 and 5 do not clear
jam, reverse paper all the
way out, remove several
sheets and refeed
Shredding can continue with
the system disabled, however a
paper jam may occur with too
many sheets and Remove
• Empty wastebasket when bin full indicator light is illuminated using bag # 36052
• Shredder will not function if the pull-out bin is not pushed all the way in, or if bin needs to be emptied.
the system, press and hold
the auto button (blue) and
reverse ( ) key at the
same time
Auto light is no longer
illuminated (To re-engage,
repeat step 1)
• When shredding for a prolonged period of time, the motor can become warm and require a cool down period. When this occurs the overheat indicator will alert you to the
problem, this model will require 20 minutes to cool down.
Paper icon
(
)
will illuminate
*100% Jam Proof when used in accordance with user manual
Maintenance is an important part of protecting your investment. Don’t forget oil and shredder bags.
Stops shredder immediately when hands are too close to the paper entry.
®
DISABLING THE FEATURE
5
3
6
Shredder oil – #35250
PS-79Ci Shredder
plastic bag – #36052
®
Should the SafeSense
The shredder will stop and
SafeSense will need to
be deactivated
To deactivate, shift override Once deactivated, the
To clear paper, press
and hold forward (
key until paper is
shredded
Once the paper is cleared,
reactivate the SafeSense
feature (To re-engage,
see Operations)
Fellowes is committed to giving our customers the support and service they deserve. That is why we offer several options for you to find technical information, step-by-step
assistance and personal attention.
®
®
indicator stay lit without
touching the opening
switch to the “not active“
position
indicator will flash and
the SafeSense feature
)
®
will not function
• www.fellowes.com features an extensive on-line support section with a number of self-service options
• Our customer service professionals are dedicated to resolve any of your issues
4
5
Download from Www.Somanuals.com. All Manuals Search And Download.
|