BL01071-200
EN
DIGITAL CAMERA
Before You Begin
First Steps
FINEPIX REAL 3D W3
Owner’s Manual
Basic Photography and Playback
More on Photography
More on Playback
Movies
Thank you for your purchase of this prod-
uct. This manual describes how to use
your FUJIFILM FINEPIX REAL 3D W3 digital
camera and the supplied software. Be sure
that you have read and understood its con-
tents before using the camera.
Connections
C
Taking
Pictures
Menus
For best results, position yourself at the appropriate distance from your sub-
ject (pg. 16) and be careful not to obstruct the lenses (pg. 17).
Technical Notes
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Troubleshooting
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
Power Lines: An outside antenna sys-
tem should not be located in the
vicinity of overhead power lines or
other electric light or power circuits,
or where it can fall into such power
lines or circuits. When installing an
outside antenna system, extreme
care should be taken to keep from
touching such power lines or circuits
as contact with them might be fatal.
Replacement Parts: When replace-
ment parts are required, be sure
the service technician has used
replacement parts specified by the
manufacturer or have the same
characteristics as the original part.
Unauthorized substitutions may
result in fire, electric shock or other
hazards.
Use
Service
Cleaning: Unplug this video product Servicing: Do not attempt to service
from the wall outlet before clean- this video product yourself as open-
ing. Do not use liquid cleaners or ing or removing covers may expose
aerosol cleaners. Use a damp cloth you to dangerous voltage or other
for cleaning.
hazards. Refer all servicing to quali-
fied service personnel.
Object and Liquid Entry: Never push
objects of any kind into this video Damage Requiring Service: Unplug this
product through openings as they video product from the wall outlet
may touch dangerous voltage and refer servicing to qualified ser-
points or short out parts that could vice personnel under the following
result in a fire or electric shock. Never conditions:
Safety Check: Upon completion of any
service or repairs to this video prod-
uct, ask the service technician to
perform safety checks to determine
that the video product is in proper
operating condition.
EXAMPLE OF ANTENNA GROUNDING
AS PER NATIONAL ELECTRICAL CODE
spill liquid of any kind on the video When the power-supply cord or
product.
Ground Clamp
Antenna
plug is damaged.
Lead in Wire
If liquid has been spilled, or objects
have fallen into the video product.
If the video product has been ex-
posed to rain or water.
If the video product has been
dropped or the cabinet has been
damaged.
If the video product does not op-
erate normally be following the
operating instructions. Adjust only
those controls that are covered by
the operating instructions as an im-
proper adjustment of other controls
may result in damage and will often
require extensive work by a qualified
technician to restore the video prod-
uct to its normal operation.
Lightning: For added protection for
this video product receiver during
a lightning storm, or when it is left
unattended and unused for long pe-
Electric
Service
Equipment
Antenna
Discharge Unit riods of time, unplug it from the wall
(NEC SECTION
810-20)
Grounding
Conductors
(NEC SECTION
810-21)
Ground
Clamps
outlet and disconnect the antenna
or cable system. This will prevent
damage to the video product due to
lightning and power-line surges.
Power Service
Grounding Electrode
System (NEC ART 250.
PART H)
When the video product exhibits a
distinct change in performance - this
indicates a need for service.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
Be sure to read this notes before using
Safety Notes
WARNING
Do not allow water or foreign objects to enter the camera.
If water or foreign objects get inside the camera, turn the camera
off, remove the battery and disconnect and unplug the AC power
adapter.
• Make sure that you use your camera correctly. Read these Safety Notes and
your Owner’s Manual carefully before use.
Continued use of the camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer.
• After reading these Safety Notes, store them in a safe place.
About the Icons
Do not use the camera in the bathroom or shower.
This can cause a fire or electric shock.
The icons shown below are used in this document to indicate the severity of
the injury or damage that can result if the information indicated by the icon
is ignored and the product is used incorrectly as a result.
Do not use in
the bathroom
or shower.
Never attempt to disassemble or modify (never open the case).
Failure to observe this precaution can cause fire or electric shock.
This icon indicates that death or serious injury can result if the infor-
mation is ignored.
Do not disas-
semble
WARNING
Should the case break open as the result of a fall or other accident, do not
touch the exposed parts.
Failure to observe this precaution could result in electric shock or in
injury from touching the damaged parts. Remove the battery im-
mediately, taking care to avoid injury or electric shock, and take the
product to the point of purchase for consultation.
This icon indicates that personal injury or material damage can result
if the information is ignored.
CAUTION
Do not touch
internal
parts
The icons shown below are used to indicate the nature of the information
which is to be observed.
Triangular icons tell you that this information requires attention (“im-
portant”).
Do not change, heat or unduly twist or pull the connection cord and do not
place heavy objects on the connection cord.
These actions could damage the cord and cause a fire or electric
shock.
• If the cord is damaged, contact your FUJIFILM dealer.
Circular icons with a diagonal bar tell you that the action indicated is
prohibited (“Prohibited”).
Filled circles with an exclamation mark tell you an action that must be
performed (“Required”).
Do not place the camera on an unstable surface.
This can cause the camera to fall or tip over and cause injury.
Never attempt to take pictures while in motion.
Do not use the camera while you are walking or driving a vehicle. This
can result in you falling down or being involved in a traffic accident.
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from the
lightning discharge.
WARNING
If a problem arises, turn the camera off, remove the battery, disconnect and
unplug the AC power adapter.
Continued use of the camera when it is emitting smoke, is emitting
any unusual odor, or is in any other abnormal state can cause a fire
Unplug
from power
socket.
or electric shock.
Do not use the battery except as specified.
Load the battery as aligned with the indicator.
• Contact your FUJIFILM dealer.
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
WARNING
CAUTION
Do not heat, change or take apart the battery. Do not drop or subject the bat-
tery to impacts. Do not store the battery with metallic products. Do not use
chargers other than the specified model to charge the battery.
Any of these actions can cause the battery to burst or leak and cause
fire or injury as a result.
Do not place heavy objects on the camera.
This can cause the heavy object to tip over or fall and cause injury.
Do not move the camera while the AC power adapter is still connected. Do not
pull on the connection cord to disconnect the AC power adapter.
This can damage the power cord or cables and cause a fire or electric
shock.
Do not use the AC power adapter when the plug is damaged or the plug socket
connection is loose.
Use only the battery or AC power adapters specified for use with this camera.
Do not use voltages other than the power supply voltage shown.
The use of other power sources can cause a fire.
If the battery leaks and fluid gets in contact with your eyes, skin or clothing.
Flush the affected area with clean water and seek medical attention or call an
emergency number right away.
This could cause a fire or electric shock.
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.
This can cause heat to build up and distort the casing or cause a fire.
Do not use the charger to charge batteries other than those specified here.
The Ni-MH battery charger is designed for FUJIFILM HR-AA Ni-MH
batteries. Using the charger to charge conventional batteries or other
types of rechargeable batteries can cause the battery to leak fluid,
overheat or burst.
When carrying the battery, install it in a digital camera or keep it in the hard
case. When storing the battery, keep it in the hard case. When discarding,
cover the battery terminals with insulation tape.
When you are cleaning the camera or you do not plan to use the camera for
an extended period, remove the battery and disconnect and unplug the AC
power adapter.
Failure to do so can cause a fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause a fire.
Using a flash too close to a person’s eyes may temporarily affect the eyesight.
Take particular care when photographing infants and young chil-
dren.
Contact with other metallic objects or battery could cause the bat-
tery to ignite or burst.
When a memory card is removed, the card could come out of the slot too quick-
ly. Use your finger to hold it and gently release the card.
Keep Memory Cards out of the reach of small children.
Because Memory Cards are small, they can be swallowed by children.
Be sure to store Memory Cards out of the reach of small children. If
a child swallows a Memory Card, seek medical attention or call an
emergency number.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric shock.
• Contact your FUJIFILM dealer to request internal cleaning every 2
years.
• Please note this is not a free of charge service.
CAUTION
Do not use this camera in locations affected by oil fumes, steam, humidity or
dust.
This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temperatures.
Do not leave the camera in locations such as a sealed vehicle or in
direct sunlight. This can cause a fire.
Keep out of the reach of small children.
This product could cause injury in the hands of a child.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
If you are using a heating pad, take
care not to place the battery di-
rectly against the pad. The camera
may not operate if you use a de-
pleted battery in cold conditions.
• Dispose of used battery promptly.
• Do not drop the battery or other-
wise subject it to strong impacts.
• Do not expose the battery to wa-
ter.
■ Battery Life
Power Supply and Battery
At normal temperatures, the bat-
tery can be used at least 300 times.
If the time for which the battery
provides power shortens markedly,
this indicates that the battery has
reached the end of its effective life
and should be replaced.
* Confirm your battery type before read-
ing the following descriptions.
The following explains proper use of
batteries and how to prolong their
• Always keep the battery terminals
clean.
life. Incorrect use of batteries can ■ Charging the Battery
cause shorter battery life, as well as • You can charge the battery using
• Do not store batteries in hot plac-
es. Also, if you use the battery for
a long period, the camera body
and the battery itself will become
warm. This is normal. Use the AC
power adapter if you are taking
pictures or viewing images for a
long period of time.
leakage, excessive heat, fire or explo-
sion.
the battery charger (included).
- The battery can be charged
at ambient temperatures be-
tween 0°C and +40°C (+32°F
and +104°F). Refer to the Owner’s
Manual for the time of charging
battery.
- You should charge the battery
at an ambient temperature be-
tween +10°C and +35°C (+50°F
and +95°F). If you charge the
battery at a temperature outside
this range, charging takes longer
because the performance of the
battery is impaired.
- You cannot charge the battery
at temperatures of 0°C (+32°F) or
below.
• The Rechargeable Lithium-ion Bat-
tery does not need to be fully dis-
charged or exhausted flat before
being charged.
■ Notes on storage
• If a battery is stored for long periods
while charged, the performance of
the battery can be impaired. If the
battery will not be used for some
time, run the battery out before
storing it.
• If you do not intend to use the
camera for a long period of time,
remove the battery from the cam-
era.
• Store the battery in a cool place.
- The battery should be stored in
a dry location with an ambient
temperature between +15°C and
+25°C (+59°F and +77°F).
Camera uses the Rechargeable
Lithium-ion Battery
1
* When shipped, the battery is not
fully charged. Always charge the
battery before using it.
* When carrying the battery, install it
in a digital camera or keep it in the
soft case.
Camera uses AA-size alkaline or Ni-MH
(nickel-metal hydride) rechargeable
batteries
2
■ Battery Features
* For details on the batteries that
you can use, refer to the Owner’s
Manual of your camera.
• The battery gradually loses its
charge even when not used. Use
a battery that has been charged
recently (in the last day or two) to
take pictures.
■ Cautions for Using Battery
• Do not heat the batteries or throw
them into a fire.
- Do not leave the battery in hot or
extremely cold places.
• To maximize the life of the battery,
turn the camera off as quickly as
possible when it is not being used.
• The number of available frames will
be lower in cold locations or at low
temperatures. Take along a spare
fully charged battery. You can also
increase the amount of power pro-
duced by putting the battery in
your pocket or another warm place
to heat it and then loading it into
the camera just before you take a
picture.
• Do not carry or store batteries with
metal objects such as necklaces or
hairpins.
• Do not expose the batteries to wa-
ter, and keep batteries from getting
wet or stored in moist locations.
• Do not attempt to take apart or
change the batteries, including
battery casings.
• Do not subject the batteries to
strong impacts.
• Do not use batteries that are leak-
ing, deformed, discolored.
■ Handling the Battery
Cautions for Your Safety:
• Do not carry or store battery with
metal objects such as necklaces or
hairpins.
• Do not heat the battery or throw it
into a fire.
• Do not attempt to take apart or
change the battery.
• Do not recharge the battery with
chargers other those specified.
• The battery may feel warm after it
has been charged or immediately
after being used. This is perfectly
normal.
• Do not recharge a fully charged
battery.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
• Do not store batteries in warm or
humid places.
• Keep the batteries out of reach of
babies and small children.
• Make sure that the battery polarity
(C and D) is correct.
• Do not use new with used batter-
ies. Do not use charged and dis-
charged batteries together.
If any liquid at all leaks from
the batteries, wipe the battery
compartment thoroughly and
then load new batteries.
• Ni-MH batteries have
a
limited
CAUTION
service life. If a battery can only
be used for a short time even after
repeated discharge-charge cycles,
it may have reached the end of its
service life.
Do not use the “Discharging re-
chargeable batteries” function when
alkaline batteries being used.
• To charge Ni-MH batteries, use the
quick battery charger (sold sepa-
rately). Refer to the instructions
supplied with the charger to make
sure that the charger is used cor-
rectly.
If any battery fluid comes into
contact with your hands or
clothing, flush the area thor-
oughly with water. Note that
battery fluid can cause loss
of eyesight if it gets into your
eyes. If this occurs, do not rub
your eyes. Flush the fluid out
with clean water and contact
your physician for treatment.
■ Disposing of Batteries
• When disposing of batteries, do
so in accordance with your local
waste disposal regulations.
• Do not use different types or
brands of batteries at the same
time.
• Do not use the battery charger to
charge other batteries.
• Note that the batteries feel warm
after being charged.
Notes on both models (
,
)
3
1
2
• If you do not intend to use the
camera for a long period of time,
remove the batteries from the
camera. Note if the camera is left
with the batteries removed, the
time and date settings are cleared.
• The batteries feel warm right af-
ter being used. Before removing
the batteries, turn the camera off
and wait for the batteries to cool
down.
• Since batteries do not work well in
cold weather or locations, warm
the batteries by placing them in-
side your garments before use.
Batteries do not work well when
cold. They will work again when
the temperature returns to normal.
• Soil (such as fingerprints) on the
battery terminals makes the bat-
teries charge less reducing the
number of images. Carefully wipe
the battery terminals with a soft
dry cloth before loading.
■ AC Power Adapter
Always use the AC Power Adapter
with the camera. The use of an AC
Power adapter other than FUJIFILM
AC Power Adapter can be damaged
to your digital camera.
For details on the AC power adapter,
refer to the Owner’s Manual of your
camera.
• Due to the way the camera is con-
structed, a small amount of current
is used even when the camera is
turned off. Note in particular that
leaving Ni-MH batteries in the
camera for a long period will over-
discharge the batteries and may
render them unusable even after
recharging.
• Ni-MH batteries will self-discharge
even when not used, and the time
for which they can be used may be
shortened as a result.
• Ni-MH batteries will deteriorate
rapidly if over-discharged (e.g.
by discharging the batteries in a
flashlight). Use the “Discharging re-
chargeable batteries” function pro-
vided in the camera to discharge
the batteries.
■ Using the AA-size Ni-MH batteries
correctly
• Ni-MH batteries left unused in
storage for long periods can be-
come “deactivated”. Also, repeat-
edly charging Ni-MH batteries
that are only partially discharged
can cause them to suffer from the
“memory effect”. Ni-MH batteries
that are “deactivated” or affected
by “memory” suffer from the prob-
lem of only providing power for a
short time after being charged. To
prevent this problem, discharge
and recharge them several times
using the camera’s “Discharging
rechargeable batteries” function.
Deactivation and memory are spe-
cific to Ni-MH batteries and are not
in fact battery faults.
• Use the AC power adapter for in-
door use only.
• Plug the connection cord plug se-
curely into the DC input terminal.
• Turn off the FUJIFILM Digital cam-
era before disconnecting the cord
from the DC input terminal. To dis-
connect, pull out the plug gently.
Do not pull on the cord.
• Do not use the AC power adapter
with any device other than your
camera.
• During use, the AC power adapter
will become hot to the touch. This
is normal.
See Owner’s Manual for the proce-
dure for “Discharging rechargeable
batteries”.
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
• Do not take apart the AC power unless intended only for personal
adapter. Doing so could be dan- use. Note that some restrictions ap-
■ Trademark Information
■ Explanation of Color Television
System
• E and xD-Picture Card™ are
trademarks of FUJIFILM Corpora-
tion.
• IBM PC/AT is a registered trademark
of International Business Machines
Corp. of the U.S.A.
• Macintosh, QuickTime, and Mac OS
are trademarks of Apple Inc. in the
U.S.A. and other countries.
• Windows 7, Windows Vista and the
Windows logo are trademarks of
the Microsoft group of companies.
• IrSimple™ Trademark is owned by
the Infrared Data Association®.
• IrSS™ Trademark or IrSimpleShot™
Trademark is owned by the Infra-
red Data Association®.
• SDHC logo is a trademark.
• HDMI logo is a trademark.
• YouTube is a trademark of Google
Inc.
NTSC: National Television System
Committee, color television
gerous.
• Do not use the AC power adapter performances, entertainments and
in a hot and humid place. exhibits, even when intended purely
• Do not subject the AC power for personal use. Users are also asked
adapter to strong shocks. to note that the transfer of Memory
• The AC power adapter may emit a Card containing images or data pro-
ply to the photographing of stage
telecasting
specifications
adopted mainly in the U.S.A.,
Canada and Japan.
PAL: Phase Alternation by Line, a
color television system ad-
opted mainly by European
countries and China.
humming. This is normal.
tected under copyright laws is only
• If used near a radio, the AC power permissible within the restrictions
adapter may cause static. If this imposed by those copyright laws.
happens, move the camera away
from the radio.
■ Handling Your Digital Camera
To ensure that images are recorded
■ Exif Print (Exif ver. 2.3)
Exif Print Format is a newly revised
digital camera file format that con-
tains a variety of shooting informa-
tion for optimal printing.
correctly, do not subject the camera
to impact or shock while an image is
being recorded.
Before Using the Camera
Do not aim the camera at extremely
bright light sources, such as the sun
■ Liquid Crystal
in a cloudless sky. Failure to observe
this precaution could damage the
camera image sensor.
If the LCD monitor is damaged, take
particular care with the liquid crystal
in the monitor. If any of the follow-
ing situations arise, take the urgent
action indicated.
• If liquid crystal comes in contact
with your skin:
Wipe the area with
IMPORTANT NOTICE: Read Before
Using the Software
Direct or indirect export, in whole or
in part, of licensed software without
the permission of the applicable
governing bodies is prohibited.
■ Test Shots Prior to Photography
For important photographs (such as
weddings and overseas trips), always
take a test shot and view the im-
age to make sure that the camera is
working normally.
• FUJIFILM Corporation cannot ac-
cept liability for any incidental
losses (such as the costs of photog-
raphy or the loss of income from
photography) incurred as a result
of faults with this product.
• Other company or product names
are trademarks or registered trade-
marks of the respective compa-
cloth and
nies.
a
then wash thoroughly with soap
and running water.
■ Notes on Electrical Interference
If the camera is to be used in hos-
pitals or aircrafts, please note that
this camera may cause interference
to other equipment in the hospital
or aircraft. For details, please check
with the applicable regulations.
• If liquid crystal gets into your eye:
Flush the affected eye with clean
water for at least 15 minutes and
then seek medical assistance.
• If liquid crystal is swallowed:
Flush your mouth thoroughly with
water. Drink large quantities of wa-
ter and induce vomiting. Then seek
medical assistance.
■ Notes on Copyright
Images recorded using your digital
camera system cannot be used in
ways that infringe copyright laws
without the consent of the owner,
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
Before using the camera, read this manual and the warnings on pages ii–viii. For information on spe-
cific topics, consult the sources below.
✔ Cameraa Q & A ......................................................pg. x ✔ Table of Contents .............................................pg. xiii
Know what you want to do but don’t know the The “Table of Contents” gives an overview of the
name for it? Find the answer in “Camera Q & A.” entire manual. The principal camera operations
are listed here.
✔ Troubleshooting ...............................................pg. 89 ✔ Warning Messaageess aand DDiisplaayyss ........................pg. 96
Having a specific problem with the camera? Find out what’s behind that flashing icon or error
Find the answer here.
message in the monitor.
✔ Gloossssaarryy .........................................................pg. 100 ✔ Resttrriiccttiioonnss oonn CCaammeerraa SSettings..............Baasic Manual
The meanings of some technical terms may be See the Basic Manual for restrictions on the op-
found here.
tions available in each shooting mode.
Memory Cards
Pictures can be stored in the camera’s internal memory or on optional SD and SDHC memory cards. In this
manual, SD memory cards are referred to as “memory cards.” For more information, see page 9.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Q & A
Find items by task.
Camera SSetup
Quueesttion
Key phrase
Date and time
See paage
13
How do I set the camera clock?
Can I set the clock to local time when I travel?
How do I keep the display from turning off automatically?
How do I make the display brighter or darker?
Time difference
Auto power off
LCD brightness
Operation and shutter volume
Silent mode
81
84
79
79
How do I stop the camera beeping and clicking?
18
Can I change the sound the shutter makes?
What do the icons in the display mean?
How much charge is left in the battery?
Shutter sound
Displays
Battery level
79
3
16
Sharriinngg PPiiccttuurreess
Quueesttion
Key phrase
See paage
49
55
Can I print pictures on my home printer?
Can I copy my pictures to my computer?
* For information on printing C pictures, visit http://fujifilm.com/3d/print/.
Printing pictures*
Viewing pictures on a computer
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Q & A
Taking Picctures
Quueesttion
Key phrase
See paage
15
21
44
How do I take C photographs?
How do I take D photographs?
How do I shoot movies in C or D?
Taking C photographs
Taking D photographs
Recording movies
How can I make good portraits?
Can I choose my own settings for different scenes?
How do I shoot close-ups?
Intelligent Face Detection
Scene position
Macro mode (close-ups)
67
22
34
How do I keep the flash from firing?
How do I stop my subjects’ eyes glowing red when I use the flash?
How do I “fill-in” shadows on back-lit subjects?
How do I take a series of pictures in a single burst?
How do I take a group portrait that includes the photographer?
Can I choose shutter speed or aperture?
Flash mode
35
Continuous mode
Self-timer mode
P, A, and M modes
66
37
24–26
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
Camera Q & A
Viewingg PPiiccttuurreess
Quueesttion
Key phrase
See paage
How do I switch between C and D views?
How do I view C pictures?
How do I view D pictures?
How do I view my pictures?
How do I delete the current picture?
Can I select other pictures for deletion?
Can I zoom in on pictures during playback?
How do I view a lot of pictures at once?
How do I view all pictures taken on the same day?
Can I protect my pictures from accidental deletion?
Can I hide the icons in the display when viewing my pictures?
Switching between C and D
Viewing C pictures
Viewing D pictures
Single-frame playback
The bbutton
39
20
21
39
20
42
40
41
41
72
39
Deleting pictures
Playback zoom
Multi-frame playback
Sort by date
Protect
Choosing a display format
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
For Your Safety ................................................................................. ii
About This Manual......................................................................... ix
Camera Q & A..................................................................................... x
More on PPhotoography
Shooting Mode...............................................................................22
B AUTO ..........................................................................................22
SP1/SP2 SCENE POSITION........................................................22
M MANUAL .....................................................................................24
A APERTURE PRIORITY AE.........................................................25
P PROGRAM AE.............................................................................26
I ADVANCED 2D ...................................................................27
V TELE/WIDE ............................................................................28
X 2-COLOR.................................................................................28
W 2-SENSITIVITY.......................................................................28
H ADVANCED 3D ...................................................................29
A INDIVID. SHUTTER 3D .......................................................30
B INTERVAL 3D SHOOTING.................................................31
Focus Lock ........................................................................................32
F Macro Mode (Close-ups) ......................................................34
N Using the Flash (Super Intelligent Flash) .......................35
hUsing the Self-Timer...............................................................37
Beffore You Beggiin
Introduction....................................................................................... 1
Symbols and Conventions.......................................................... 1
Supplied Accessories.................................................................... 1
Parts of the Camera....................................................................... 2
Camera Displays .......................................................................... 3
The Mode Dial .............................................................................. 4
First Steps
Charging the Battery ..................................................................... 5
Inserting the Battery...................................................................... 6
Inserting a Memory Card............................................................. 9
Turning the Camera on and Off...............................................12
Shooting Mode.............................................................................12
Playback Mode..............................................................................12
Basic Setup .......................................................................................13
Moorree on PPllayback
Playback Options...........................................................................39
Playback Zoom..............................................................................40
Multi-Frame Playback.................................................................41
Sort by Date....................................................................................41
ADeleting Pictures....................................................................42
Basic Photograpphy andd Playback
Taking C Pictures in Auto Mode .........................................15
Viewing C Pictures....................................................................20
Shooting and Viewing D Pictures......................................21
Taking Pictures in D.................................................................21
Viewing Pictures in D..............................................................21
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Movies
Menus
FRecording Movies...................................................................44
aViewing Movies .......................................................................46
Using the Menus: Shooting Mode .........................................60
Using the Shooting Menu.........................................................60
Shooting Menu Options............................................................61
NISO............................................................................................63
OIMAGE SIZE............................................................................64
TIMAGE QUALITY ..................................................................65
PFINEPIX COLOR....................................................................65
DWHITE BALANCE.................................................................66
RCONTINUOUS.......................................................................66
bFACE DETECTION (D Only)..........................................67
CPHOTOMETRY......................................................................68
F2D AF MODE (D Only) ...................................................68
Using the Menus: Playback Mode..........................................69
Using the Playback Menu .........................................................69
Playback Menu Options.............................................................69
iPARALLAX CONTROL (C Only)...................................70
ISLIDE SHOW .........................................................................70
BRED EYE REMOVAL (D Only) .......................................71
DPROTECT ................................................................................72
GCROP........................................................................................73
ORESIZE .....................................................................................74
CIMAGE ROTATE (D Only)...............................................75
ECOPY........................................................................................76
Connections
Viewing Pictures on TV...............................................................47
Viewing Pictures on a 3D TV.....................................................48
Printing Pictures via USB (D Only) .....................................49
Connecting the Camera ............................................................49
Printing Selected Pictures ........................................................50
Printing the DPOF Print Order ................................................52
Creating a DPOF Print Order....................................................53
Viewing Pictures on a Computer............................................55
Installing the Software...............................................................55
Connecting the Camera ............................................................57
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
The Setup Menu.............................................................................78
Using the Setup Menu ...............................................................78
Setup Menu Options...................................................................79
NTIME DIFFERENCE...............................................................81
KFORMAT..................................................................................82
AIMAGE DISP. ..........................................................................82
BFRAME NO.............................................................................83
wHDMI OUTPUT .....................................................................83
MAUTO POWER OFF..............................................................84
DDIGITAL ZOOM (D Only)...............................................84
qOPT AXIS CONTROL...........................................................85
o3DREC .....................................................................................85
r3D CAUTION DISP ..............................................................85
Techniccal Notees
Optional Accessories ...................................................................86
Accessories from FUJIFILM.......................................................87
Caring for the Camera.................................................................88
Troublesshootinng
Troubleshooting ............................................................................89
Warning Messages and Displays............................................96
Appendix
Glossary .......................................................................................... 100
Internal Memory/Memory Card Capacity....................... 102
Specifications............................................................................... 103
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Caution: Using the FinePix REAL 3D W3
D display is recommended for young children (up to the age of about six) whose visual system is still maturing
and for individuals with notable differences in vision between their two eyes, who may find it difficult or impos-
sible to observe the C effect. Should you experience fatigue or discomfort while viewing C images, cease use
immediately. A ten-minute break is recommended about once every half hour. Switch to D immediately if C
images still appear double after you have adjusted parallax. Individuals with a history of photosensitive epilepsy
or heart disease or who are unwell or suffering from fatigue, insomnia, or the affects of alcohol should refrain from
viewing C images. Viewing C images while in motion may cause fatigue or discomfort.
To avoid adverse effects on vision, images displayed on HDMI devices should be viewed from a distance equal to
at least twice the width of the screen, and the screen should be no larger than 65 in. Select D when viewing
images on displays larger than 65 in.
File Formats
C pictures are recorded in one of two new formats: multi-picture format for photographs (pg. 20, 100) and 3D
movie format for movies (pg. 44, 100). D images are recorded in existing formats.
xvi
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Symbols and Conventions
The following symbols are used in this manual:
3 Caution: This information should be read before use to ensure correct operation.
1Note: Points to note when using the camera.
2 Tip: Additional information that may be helpful when using the camera.
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the
monitor display may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
CD-ROM
NP-50 rechargeable battery
BC-45W battery charger
USB cable
Attaching the Strap
Attach the strap as shown.
• Basic Manual
• Strap
3 Caution
To ensure that you do not drop the camera,
wear the strap on your wrist.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Parts of the Camera
For more information, refer to the page listed to the right of each item.
Selector button
Move cursor up
m(monitor brightness) button (see below)
b(delete) button (pg. 20)
Move cursor left
F (macro) button
(pg. 34)
Move cursor right
N (fl a s h ) button
(pg. 35)
Move cursor down
MENU/OK button (pg. 13)
h(self-timer) button (pg. 37)
1
2
3
Zoom control..............................16, 40, 45 10 Monitor............................................................. 3 20 DISP (display)/BACK button................17, 39
Shutter button...........................................19 11 a(playback) button..........................20, 39 21 Battery-chamber cover.......................... 6
Flash..................................................................35 12 Indicator lamp............................................19 22 Tripod mount
4 Q(parallax) control ..................................15 13 Mode dial........................................................ 4 23 HDMI mini connector ...........................48
5
6
7
8
9
Left lens
Right lens
14 F(movie/photo) button........................... 44 24 USB and A/V connector........47, 49, 57
15 Strap eyelet.................................................... 1 25 Battery chamber..................................6, 10
Microphone................................................ 44 16 Terminal cover.....................47, 48, 49, 57 26 Battery latch ............................................. 6, 7
On/off switch and lens cover ...........12 17 C mode indicator................................15 27 Memory card slot.....................................10
Illuminator
18 3D (C/D) button .........15, 21, 39, 44
Self-timer lamp..........................................38 19 Speaker...........................................................46
2 Tip: Monitor Brightness
Pressing the mbutton briefly increases monitor brightness, making the display easier to see in bright light. Nor-
mal brightness is restored when a photograph is taken.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Camera DDiissplaayys
The following indicators may appear during shooting and playback:
■ Shoooting
1
2
3
4
5
6
7
Internal memory indicator* ................. 9 13 Focus frame.........................................18, 68
Focus warning ...................................18, 96 14 Date and time.....................................13, 79
Blur warning........................................35, 96 15 Number of available frames...........102
Silent mode indicator............................18 16 Sensitivity......................................................63
Continuous mode ...................................66 17 Image quality/size............................64, 65
Metering........................................................68 18 Bright monitor indicator........................ 2
M
9
800
N
3D
12/31/2050 10:00 AM
12
02
Intelligent Face Detection
19 FINEPIX color...............................................65
-
50
F5
3
indicator.........................................................67 20 White balance............................................66
Shooting mode.........................................61 21 Battery level.................................................16
Flash mode...................................................35 22 Parallax display...........................................15
8
9
* a: indicates that no memory card
is inserted and that pictures will
be stored in the camera’s internal
memory (pg. 9).
10 Macro (close-up) mode.............................34 23 Lens obstruction warning..................96
11 Self-timer indicator.................................37 24 Exposure compensation.....................61
12 C/D mode indicator
......................................................15, 21, 39, 44
■ Playback
1
2
3
4
Gift image.....................................................39
Silent mode indicator............................18 8 C/D mode indicator
Red-eye removal indicator ................71
Intelligent Face Detection
7
DPOF print indicator..............................54
100-0001
800
3D
......................................................15, 21, 39, 44
9 C image .....................................................20
4:3
N
indicator.................................................40, 71 10 Frame number...........................................83
Playback mode indicator............20, 39 11 Parallax display...........................................15
Protected image.......................................72
5
6
12/31/2050 10:00 AM
02
-
12
50
F5
3
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thee MMooddee DDiiaall
To select a shooting mode, align the mode icon with the mark next to the
mode dial.
I (ADVANCED 2D): Use the left and right
lens to take two D photos simultane-
ously with different settings applied to
each (pg. 27).
H (ADVANCED 3D): Take two pictures
with the left lens for greater freedom in
framing C photos (pg. 29).
B
(AUTO):
A
simple “point-and-shoot”
P, A, M: Select for full control over camera
settings, including aperture (M and A)
and/or shutter speed (M; pg. 24).
mode recommended for first-time users
of digital cameras (pg. 15).
SP1, SP2 (SCENE POSITION): Choose
a
scene suited to the subject or shooting
conditions and let the camera do the rest
(pg. 22).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
The battery is not charged at shipment. Charge the battery before use.
Plug the charger in.
Plug the charger into a power outlet. The
charging indicator will light.
Batteries
2
The camera uses an NP-50 rechargeable battery.
Place the battery in the charger.
1
The Charging Indicator
The charging indicator shows battery charge
status as follows:
Insert the battery into the supplied battery
charger as shown, making sure that the bat-
tery is in the orientation indicated by the
CBD label.
Chaarrginng inndiicator Batttteerryy sstaatuus
Action
Insert the
battery.
Battery not
inserted.
Battery fully Remove the
Battery
Off
Charge lamp
Arrow
charged.
battery.
Battery
charging.
On
—
Unplug the
charger and
remove the
battery.
DFC label
Blinks
Battery fault.
DFC label
Battery charger
3 Cautions
Charge the battery.
• Unplug the charger when it is not in use.
• Remove dirt from the battery terminals with a
clean, dry cloth. Failure to observe this precau-
tion could prevent the battery from charging.
• Charging times increase at low temperatures.
3
Remove the battery when charging is com-
plete. See page 106 for information on
charging times.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Battery
Insert the battery in the camera as described below.
Open the battery-chamber cover.
Insert the battery.
Align the orange stripe
on the battery with the
1
2
orange battery latch
and slide the battery
into the camera, keep-
ing the battery latch pressed to one side.
Confirm that the battery is securely latched.
1Note
Be sure the camera is off before opening the bat-
tery-chamber cover.
3 Cautions
• Do not open the battery-chamber cover when
the camera is on. Failure to observe this pre-
caution could result in damage to image files or
memory cards.
• Do not use excessive force when handling the
battery-chamber cover.
Orange stripe
Battery latch
3 Caution
Insert the battery in the correct orientation. Do
NOT use force or attempt to insert the battery up-
side down or backwards. The battery will slide in
easily in the correct orientation.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Battery
3 Cautions
Close the battery-chamber cover.
3
• Do not affix stickers or other objects to the battery.
Failure to observe this precaution could make it im-
possible to remove the battery from the camera.
• Do not short the battery terminals. The battery could
overheat.
• Read the cautions on page vi.
Removing the Battery
• Use only batteries designated for use with this cam-
era. Failure to observe this precaution could result in
product malfunction.
• Do not remove the labels from the battery or attempt
to split or peel the outer casing.
After turning the camera off,
open the battery-chamber cover,
press the battery latch to the
side, and slide the battery out of
the camera as shown.
• The battery gradually loses its charge when not in
use. Charge the battery one or two days before use.
Battery latch
3 Caution
Turn the camera off before removing the battery.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting the Battery
2 Tips: Using an AC Power Adapter
• The camera can be powered by an optional AC power adapter and DC coupler (sold separately). Lift up and
rotate the cover for the DC coupler cable channel as shown and the insert the DC coupler into the battery
chamber, making sure that the DC coupler cable passes through the cable channel. See the manuals provided
with the AC power adapter and DC coupler for details.
Cover for DC coupler cable
channel
• If the camera is powered by an AC power adapter, demo mode slides will be displayed when the camera is
turned on. Press the shutter-release button halfway to cancel demo mode. Demo mode can be disabled using
the sDEMO MODE option in the setup menu (pg. 80).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a Memory Card
Although the camera can store pictures in internal memory, optional SD memory cards (sold sepa-
rately) can be used to store additional pictures.
When no memory card is inserted, a appears in the monitor and internal memory is used for recording
and playback. Note that because camera malfunction could cause internal memory to become cor-
rupted, the pictures in internal memory should periodically be transferred to a computer and saved on
the computer hard disk or on removable media such as CDs or DVDs. The pictures in internal memory
can also be copied to a memory card (see page 76). To prevent internal memory from becoming full,
be sure to delete pictures when they are no longer needed.
When a memory card is inserted as described below, the card will be used for recording and playback.
■ Compattible MMemoorryy CCaarrddss
FUJIFILM and SanDisk SD and SDHC memory cards have been approved for use in the camera. A com-
plete list of approved memory cards is available at http://www.fujifilm.com/products/digital_cameras/
index.html. Operation is not guaranteed with other cards. The camera can not be used with xD-Picture
Cards or MultiMediaCard (MMC) devices.
3 Caution
SD memory cards can be locked, making it impossible to format the card or to record or
delete images. Before inserting an SD memory card, slide the write-protect switch to the
unlocked position.
Write-protecctt sswwiittcch
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a Memory Card
■ Inserting aa MMemmory Card
Open the battery-chamber cover.
Close the battery-chamber cover.
1
3
1Note
Be sure the camera is off before opening the bat-
tery-chamber cover.
Removing Memory Cards
Turn the camera off and then
press the card in and release it
slowly. The card can now be re-
moved by hand.
Insert the memory card.
2
Holding the memory card in the orientation
shown, slide it in until it clicks into place at
the back of the slot.
3 Cautions
• The memory card may spring out if you remove
your finger immediately after pushing the card in.
• Memory cards may be warm to the touch after be-
ing removed from the camera. This is normal and
does not indicate a malfunction.
Click
Be sure card is in correct orientation; do not
insert at an angle or use force. If the memory
card is not correctly inserted, pictures will be
recorded to internal memory.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting a Memory Card
3 Cautions
• Do not turn the camera off or remove the memory card while the memory card is being formatted or data are being recorded to or
deleted from the card. Failure to observe this precaution could damage the card.
• Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer
or other device. For more information on formatting memory cards, see page 82.
• Memory cards are small and can be swallowed; keep out of reach of children. If a child swallows a memory card,
seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions of an SD card may not eject
normally; if the card does not eject, take the camera to an authorized service representative. Do not forcibly
remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD memory card. Use a card with a class 6 write speed
(6MB/s) or better when shooting movies.
• The data in internal memory may be erased or corrupted when the camera is repaired. Please note that the
repairer will be able to view pictures in internal memory.
• Formatting a memory card or internal memory in the camera creates a folder in which pictures are stored. Do
not rename or delete this folder or use a computer or other device to edit, delete, or rename image files. Always
use the camera to delete pictures from memory cards and internal memory; before editing or renaming files,
copy them to a computer and edit or rename the copies, not the originals.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning the Camera on and Off
Shooting Mode
Playback Mode
To turn the camera on, open the lens cover as To turn the camera on and begin playback with-
shown below. The camera turns off when the out opening the lens cover, press the abutton
lens cover is closed.
for about a second.
Camera on
Camera off
To turn the camera off, open and close the lens
cover.
2 Tip: Switching to Playback Mode
Press the abutton for about a second to start play-
back. Press the shutter button halfway to return to
shooting mode.
2 Tip: Switching to Shooting Mode
To exit to shooting mode, press the shutter button
halfway. Press the abutton to return to playback.
3 Caution
Pictures can be affected by fingerprints and other
marks on the lenses. Keep the lenses clean.
2 Tip: Auto Power Off
The camera will turn off automatically if no operations are performed for the length of time selected in the
MAUTO POWER OFF menu (pg. 84). To turn the camera on, close and reopen the lens cover or press the a
button for about a second.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as
described below (for information on resetting the clock or changing languages, see page 79).
Choose a language.
1
1.1 Press the selector up, down, left, or right to highlight a language.
1.2 Press MENU/OK.
Set the date and time.
2
2.1 Press the selector left or right to highlight the year, month, day,
hour, or minute and press up or down to change. To change the
order in which the year, month, and day are displayed, highlight
the date format and press the selector up or down.
2.2Press MENU/OK.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Setup
Choose power management options.
3
3.1 Press the selector up or down to highlight one of the following:
• v POWER SAVE 1/w POWER SAVE 2: Save battery power. Choose
v POWER SAVE 1 to display C images in D for increased
savings.
• p QUICK AF: Reduce focusing time for a quick shutter response
.
3.2 Press MENU/OK.
2 Tip: The Camera Clock
If the battery is removed for an extended period, the camera clock will be reset and the language-selection dialog
will be displayed when the camera is turned on. If the battery is left in the camera for about four days, the battery
can be removed for about a week without resetting clock, language selection, or power management options.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking C Pictures in Auto Mode
This section describes how to take C pictures in B (auto) mode.
Turn the camera on.
Fully open the lens cover.
Parallax (pg. 101)
1
2
The appearance of C images
can be adjusted using the Q
control (pg. 2). The percent-
age is displayed in the monitor.
Press the shutter button to take
a picture at the current setting,
Rotate the mode dial to B.
C will be displayed
in the monitor and the
C mode indicator will
light.
or press the 3D button twice to reset parallax.
Note that adjusting parallax re-
duces horizontal frame cover-
age. The new crop is shown by
black borders in the display.
2 Tip: Auto Parallax
For automatic parallax adjustment, select ON for
iAUTO PARALLAX CONTROL (pg. 62). Parallax
can still be adjusted manually when ON is selected.
3 Caution: Excessive Parallax
Too much parallax may make it impossible to per-
ceive the 3D effect.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking C Pictures in Auto Mode
Check the battery level.
Check the battery level in
the display.
Frame the picture.
3
4
Position the main subject in the focus frame
and use the zoom control to frame the pic-
ture in the display.
Select jto zoom out
Select ito zoom in
Indicator
D
Descripption
Battery partially discharged.
(white)
C
Zoom indicator
Battery more than half discharged.
(white)
B
Low battery. Charge as soon as pos-
(red) sible.
A
Battery exhausted. Turn camera off
(blinks red) and charge battery.
1Note: C
The C effect may not be
visible at high zoom ratios
or with subjects that are outside the suggested
range (pg. 103), poorly lit, or at the edge of the
frame. For best results, shoot from about 1.5–
2m/4.9–6.6 ft. (wide angle).
Approx. 1.5–2 m
(4.9–6.6 ft.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking C Pictures in Auto Mode
Holding the Camera
Shooting Information
To choose the shooting information and guides dis-
played, press the DISP/BACK button.
Hold the camera steady with both hands and brace
your elbows against your sides. Shaking or unsteady
hands can blur your shots.
Indicators displayed
Indicators hidden
Best framing
Hiding indicators makes it easier to see the C effect.
To use best framing, position the main subject at the
intersection of two lines or align one of the horizontal
lines with the horizon. Use focus lock (pg. 32) to focus
on subjects that will not be in the center of the frame
in the final photograph.
To avoid interfering with the C effect and to pre-
vent pictures that are out of focus or too dark (under-
exposed), keep your fingers and other objects well
away from the lenses and flash. Note that the C
effect may not be visible if the display is viewed at
an angle.
2 Tip: Focus Lock
Use focus lock (pg. 32) to focus on subjects that are not
in the focus frame.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking C Pictures in Auto Mode
Focus.
Silent Mode
5
Press the shutter button halfway to focus on
the main subject in the focus frame.
In situations in which camera sounds or lights may be
unwelcome, hold the DISP/BACK button down until o
is displayed (silent mode can also be selected using
the oSILENT MODE option in the setup menu as
described on page 79).
Press
halfway
Focus frame
1Note
Camera selects small focus
frame and focuses on subject
The lenses may make a noise when the camera
focuses. This is normal.
The speaker, flash, illuminator, and self-timer lamp
turn off and flash and volume settings can not be
adjusted (note that the flash will still fire when C
is selected in scene mode). To restore normal opera-
tion, press the DISP/BACK button until the o icon is no
longer displayed.
If the camera is able to focus with both lenses, it
will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame
will turn red, s will be displayed, and the
indicator lamp will blink green. Change the
composition or use focus lock (pg. 32).
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking C Pictures in Auto Mode
Shoot.
The Indicator Lamp
6
Smoothly press the shutter button
the rest of the way down to take
the picture.
Indicator lamp
2 Tip: The Shutter Button
The shutter button has two positions. Pressing the
The indicator lamp shows camera status as follows:
shutter button halfway ( ) sets focus and exposure;
q
Indicatoor lamp
Camera status
to shoot, press the shutter button the rest of the way
down ( ).
w
Glows green Focus locked.
Blur, focus, or exposure warning. Pic-
ture can be taken.
Blinks green
Double
beep
Click
Blinks green and Recording pictures. Additional pictures
orange
can be taken.
q
w
Recording pictures. No additional pic-
tures can be taken at this time.
Flash charging; flash will not fire when
picture is taken.
Lens or memory error (internal memory
or memory card full or not formatted,
format error, or other memory error).
Glows orange
Blinks orange
Blinks red
Press halfway
Press the rest of
the way down
1Note
If the subject is poorly lit, the flash may fire when the
picture is taken. For information on using the flash
when lighting is poor, see page 35.
2 Tip: Warnings
Detailed warnings appear in the display. See pages
96–99 for more information.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing C Pictures
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and
check the results. C pictures are stored in multi-picture (“.mpo”) format; JPEG copies can be recorded
by selecting MPO+JPEG for the o3DREC option in the setup menu.
Press the abutton.
Deleting Pictures
1
2
The most recent picture
will be displayed in the
monitor. Pictures taken in
C are indicated by a g
icon; confirm that C ap-
pears in the display.
To delete the picture currently displayed
in the monitor, press the selector up (b).
The following dialog will be displayed.
View additional pictures.
Press the selector right to
view pictures in the order
recorded, left to view pictures in reverse or-
der.
To delete the picture, highlight OK and
press MENU/OK. To exit without deleting
the picture, highlight CANCEL and press
MENU/OK.
Press the shutter button to exit to shooting
mode.
2 Tip: The Playback Menu
Pictures can also be deleted from the playback menu
(pg. 42).
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting and Viewing D Pictures
Taking Pictures in D
Viewing Pictures in D
To shoot pictures in D, press the 3D button to D pictures can be viewed as described on page
select D mode.
20. Note that when C pictures are viewed in
D, only the image recorded with the left lens
will be displayed.
Take pictures as described on pages 15–19. D
is displayed in the monitor and photographs are
taken using the left lens and saved in JPEG (“.jpg”)
format (Exif 2.3).
Images that were originally recorded in D are
indicated by the absence of a g icon.
Note that the picture angle of photographs taken
in D differs from that of C images.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
Choose a shooting mode according to the scene or type of subject. To choose a shooting mode, rotate
the mode dial to the desired setting (pg. 4). The following modes are available:
Press the selector up or down to
highlight a scene (pg. 23).
B AUTO
2
Choose for crisp, clear snapshots (pg. 15). This
mode is recommended in most situations.
Press MENU/OK to select the high-
lighted option.
3
SP1/SP2 SCENE POSITION
The camera offers a choice of “scenes,” each
adapted to particular shooting conditions or a
specific type of subject, which can be assigned
to the SP1 and SP2 positions on the mode dial.
Each position can be assigned a different scene:
Press DISP/BACK to return to shooting
mode.
4
Select SP1 or SP2 and press MENU/OK
to display the following menu.
1
Note: If the shooting menu is
displayed, highlight ASCENE
POSITION and press MENU/OK.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
Scene
Descripption
Choose EANTI-BLUR (picture stabilization) mode for fast shutter speeds that reduce blur caused by
camera shake or subject movement. Recommended for photographs of children and pets.
E ANTI-BLUR
Get good results with backlit subjects and other difficult lighting. The camera takes two shots: one without
the flash and one with.
Capture natural light indoors, under low light, or where the flash can not be used. The flash turns off and
sensitivity is raised to reduce blur.
CNATURAL & N
D NATURAL LIGHT
L
PORTRAIT
Choose for soft-toned portraits with natural skin tones.
M
LANDSCAPE
Choose for crisp, clear daylight shots of buildings and landscapes.
Choose when photographing moving subjects. p QUICK AF is automatically selected for SPOWER
MANAGEMENT and priority is given to faster shutter speeds.
Choose this mode for poorly lit twilight or night scenes. Sensitivity is automatically raised to reduce blur
caused by camera shake.
N
O
SPORT
NIGHT
H NIGHT (TRIPOD) Choose this mode for slow shutter speeds when shooting at night. Use a tripod to prevent blur.
Q
R
S
F
U
SUNSET
SNOW
BEACH
Record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
UNDERWATER Choose for vivid blues when taking photographs of subjects in an aquarium.
PARTY
Capture indoor background lighting under low-light conditions.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
M MANUAL
In this mode, you choose both shutter speed and aperture. If desired, exposure can be altered from
the value suggested by the camera.
Select mode M and press MENU/OK to
display the shooting menu.
Press the selector up or down to
choose the aperture, left or right to
choose the shutter speed.
1
4
Press MENU/OK.
5
6
Press the selector up or down to
highlight dSET SHUTTERSPEED,
APERTURE..
Press DISP/BACK to return to shooting
mode.
2
3
Take pictures.
7
Press MENU/OK. Shutter speed and
aperture will be displayed.
The Exposure Indicator
The amount the picture will be
under- or over-exposed at cur-
rent settings is shown by the ex-
posure indicator.
Shutter speed
Aperture
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
A APERTURE PRIORITY AE
In this mode, you choose the aperture while the camera adjusts shutter speed for optimal exposure.
Select mode A and press MENU/OK to
display the shooting menu.
Press the selector up or down to
choose exposure compensation, left
or right to choose the aperture.
1
4
Press MENU/OK.
5
6
Press the selector up or down to
highlight dSETTING APERTURE.
Press DISP/BACK to return to shooting
mode.
2
3
Take pictures. If the correct exposure can not
be achieved at the selected aperture, shutter
speed will be displayed in red when the shut-
ter button is pressed halfway. Adjust aperture
until the correct exposure is achieved.
Press MENU/OK. Exposure compensa-
tion and aperture will be displayed.
7
Exposure compensation
3 Caution
If the subject is outside the metering range of the cam-
era, the shutter speed display will show “---”. Press the
shutter button halfway to measure exposure again.
Aperture
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
P PROGRAM AE
In this mode, the camera sets aperture and shutter speed automatically. Exposure can be adjusted
using the dEXP. COMPENSATION option in the shooting menu.
3 Caution
If the subject is outside the metering range of the camera, the shutter speed and aperture displays will show “---”.
Press the shutter button halfway to measure exposure again.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
I ADVANCED 2D
The camera simultaneously takes two D pictures—one with each lens—with different options se-
lected for each.
Select I and press MENU/OK to
display I options.
Press MENU/OK to select the high-
lighted option.
1
2
3
4
Press DISP/BACK to return to shooting
mode.
Press the selector up or down to
highlight one of the following op-
tions:
• V TELE/WIDE: Zoom for the left lens can be
adjusted using the zoom control. The right
lens is zoomed all the way out (pg. 28).
• X 2-COLOR: The two pictures use different
settings for FINEPIX color (pg. 28).
• W 2-SENSITIVITY: The camera sets sensitivity
separately for each lens (pg. 28).
3 Caution: I Mode
In mode, the camera displays the view through the left lens only. Be careful not to ob-
struct the right lens during shooting.
I
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
V TELE//WIDE
W 2-SENSIITIIVITY
Zoom for the left lens can be
adjusted using the zoom con-
trol. The right lens is zoomed
all the way out.
If lighting permits, sensitivity is set higher for the
right lens than for the left (the maximum value for
the left lens is ISO 400, that for the right lens ISO
1600; note that the same value may be used for
both lenses if the subject is brightly lit).
Sensiitivity
X 2-COLOR
Lightinng
Dark
Left lens
ISO 400
Right leens
ISO 1600
Select the desired combination of color options
using the j2-COLOR SETTING option in the
shooting menu (pg. 61).
ISO 100
ISO 100
ISO 400
ISO 100
Bright
The selected combination is
shown by an icon in the display.
Higher sensitivities permit faster shutter speeds.
If you pan the camera to follow a moving object,
the background in the shot taken with the right
lens will be less blurred than in the shot taken
with the left, producing different speed effects. If
lighting is poor, the shot taken with the right lens
will be less blurred, while the shot taken with the
left lens will have less noise.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
H ADVANCED 3D
This mode offers greater C flexibility than B mode. The camera takes two shots with the left lens
and combines them to form a C picture.
Select H and press MENU/OK to
display H options.
Press MENU/OK to select the high-
lighted option.
1
2
3
4
Press DISP/BACK to return to shooting
mode.
Press the selector up or down to
highlight one of the following op-
tions:
• B INTERVAL 3D SHOOTING: The camera auto-
matically takes the two shots at a fixed inter-
val (pg. 31).
• A INDIVID. SHUTTER 3D: One shot is taken each
time you press the shutter button (pg. 30).
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
A INDIVIIDD.. SSHHUUTTTTEERR 33DD
Use this option to combine two shots taken from
different angles to create a C picture. Use in
macro mode, to create C pictures of distant ob-
ject, and in other situations in which the desired
results can not be achieved in B (auto) mode.
Take the first shot.
2
3
1Note
To exit without taking the second shot, press DISP/
BACK or turn the camera off. Note that the camera
will turn off and shooting will be cancelled if no
operations are performed for the length of time se-
lected for MAUTO POWER OFF (pg. 84).
The first shot will be superimposed on the
view through the lens. Using the first shot as
a guide, reposition the camera and take the
second shot to create a C picture. Note that
the 3D effect may not be visible if the paral-
lax between the two positions is too great; the
best results will be achieved if the distance the
camera is moved between the two shots is
Choose the order in which the shots will be
taken (left first or right first) using the lTURN
option in the shooting menu (pg. 61).
1
th
th
1
1
/
/
between 30 and 50 of the distance to the
subject.
First shot shown by E
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
B INTERVAAL 3D SHOOTTING
Use this option to take C pictures of distant ob-
jects from a moving vehicle.
Choose the order in which the shots will be
taken (left first or right first) using the lTURN
option in the shooting menu (pg. 61). Choose
the order that matches the direction of mo-
tion.
2
3
Select the delay between the two shots us-
1
ing the k3D INTERVAL TIME option in the
shooting menu (pg. 61). Choose shorter delays
for less distant objects or faster-moving ve-
hicles (the best results will be achieved if the
First shot shown by E
Take the first shot. A timer
distance the camera moves between the two
th
shots is between 1 30 and 1 50th of the distance
to the subject). The 3D effect may not be vis-
ible if the parallax between the two shots is
too great or if another object is between the
camera and your subject.
is displayed after the first
shot; the second shot is tak-
en when the timer reaches
zero. No operations can
be performed while the timer is active; if the
camera is turned off before the second shot is
taken, no picture will be recorded.
/
/
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lock
To compose photographs with off-center subjects:
Position the subject in the focus frame.
Recompose the picture.
Keeping the shutter button pressed halfway,
recompose the picture.
1
3
4
Focus.
2
Press the shutter button halfway to set fo-
cus and exposure. Focus and exposure (and
in C mode, parallax; pg. 15) will remain
locked while the shutter button is pressed
halfway (AF/AE lock).
Shoot.
Press the shutter-release button the rest of
the way down to take the picture.
Press the rest of
the way down
Press
halfway
Repeat steps 1 and 2 as desired to refocus
before taking the picture.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Focus Lock
Autofocus
Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed
below. If the camera is unable to focus using autofocus, use focus lock (pg. 32) to focus on another subject at
the same distance and then recompose the photograph.
• Very shiny subjects such as mir-
rors or car bodies.
• Fast-moving subjects.
• Subjects photographed through a window or other reflective object.
• Dark subjects and subjects that absorb rather than reflect light, such as hair or fur.
• Insubstantial subjects, such as smoke or flame.
• Subjects that show little contrast with the background (for example, subjects in clothing that is the same color
as the background).
• Subjects positioned in front of or behind a high-contrast object that is also in the focus frame (for example, a
subject photographed against a backdrop of highly contrasting elements).
Auto Parallax
Although the camera boasts highly precise parallax control, auto parallax may not produce the desired results
with the subjects listed under “Autofocus” (above) or with subjects outside the recommended range (particu-
larly if the subject is close to the camera), repeating rectangular patterns such as venetian blinds or the windows
in an office building, or straight lines such as poles or wires. Use focus lock (pg. 32) or adjust parallax manually
(pg. 15).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
F Macro Mode (Close-ups)
For close-ups, press the selector left (F) to display macro close-up options. Press the selector left or
right to highlight F and press MENU/OK.
Choose from F (macro mode)
or OFF (macro mode off)
When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the
zoom control to compose pictures (pg. 16).
To exit macro mode, press the selector left (F) and select OFF.
1Notes
• Use of a tripod is recommended to prevent blur caused by camera shake.
• The flash may fail to light the entire subject at very short ranges. Increase the distance to the subject and try
again.
3 Caution
C pictures taken in macro mode may not produce the desired results when viewed on TV.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
N Using the Flash (Super Intelligent Flash)
When the flash is used, the camera’s Super Intelligent Flash system instantly analyzes the scene based
on such factors as the brightness of the subject, its position in the frame, and its distance from the
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the
flash when lighting is poor, for example when shooting at night or indoors under low light.
Choose a flash mode.
1
Press the selector right (N). The following options will be displayed;
press the selector left or right to highlight an option and press MENU/OK.
In modes other than A, the current mode is indicated by an icon in
the display.
Mode
Descripption
A (AUTO FLASH)
The flash fires when required. Recommended in most situations.
As above, except that camera minimizes “red-eye” caused when light from the flash is re-
flected from the subject’s retinas.
K (RED EYE REDUCTION)
The flash fires whenever a picture is taken. Use for backlit subjects or for natural coloration
when shooting in bright light.
N
(FORCED FLASH)
L(FORCED FLASH)
As for fill flash, except that camera minimizes “red-eye.”
The flash does not fire even when the subject is poorly lit. k will appear in the monitor
P (SUPPRESSED FLASH) at slow shutter speeds to warn that pictures may be blurred. Use of a tripod is recom-
mended.
Capture both the main subject and the background under low light (note that brightly lit
scenes may be overexposed).
O (SLOW SYNCHRO)
M (RED EYE & SLOW)
As for slow sync, except that camera minimizes “red-eye.”
35
Download from Www.Somanuals.com. All Manuals Search And Download.
N Using the Flash (Super Intelligent Flash)
Focus.
2
3
Press the shutter button halfway to focus. If the flash will fire, p will be displayed when
the shutter button is pressed halfway. At slow shutter speeds, k will appear in the dis-
play to warn that pictures may be blurred; choose another flash mode or use a tripod.
Shoot.
Press the shutter button the rest of the way down to shoot.
3 Caution
The flash may fire several times with each shot. Do not move the camera until shooting is com-
plete.
Red-Eye Reduction
Red-eye reduction minimizes “red-eye” caused when light from the flash is reflected from the sub-
ject’s retinas as shown in the illustration at right.
2 Tip: Red-Eye Removal (D Only)
When ON is selected for both bFACE DETECTION in the shooting menu (D only; pg. 67) and BRED EYE
REMOVAL in the setup menu (pg. 79), pictures are processed to remove red-eye and the flash mode can be
selected from K, L, and M. Unprocessed copies of pictures taken using red-eye removal can be saved using
nSAVE ORG IMAGE in the setup menu (pg. 80).
36
Download from Www.Somanuals.com. All Manuals Search And Download.
hUsing the Self-Timer
The camera offers a ten-second timer that allows photographers to appear in their own photographs,
and a two-second timer that can be used to avoid blur caused by the camera moving when the shutter
button is pressed. The self-timer is available in all shooting modes.
Set the timer.
1
The current self-timer mode is displayed in the monitor. To choose a different setting, press the
selector down (h). Self-timer options will be displayed; press the selector left or right to highlight
an option and press MENU/OK.
Choose from T (self-timer off),
S (10 s delay), or R (2 s delay)
Focus.
2
Press the shutter button halfway to focus.
3 Caution
Stand behind the camera when using the shutter button. Standing in front
of the lens can interfere with focus and exposure.
Start the timer.
3
Press the shutter button the rest of the way down to start the timer.
The display in the monitor shows the number of seconds remaining
until the shutter is released. To stop the timer before the picture is
taken, press DISP/BACK.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
hUsing the Self-Timer
The self-timer lamp on the front of the camera will blink
immediately before the picture is taken. If the two-sec-
ond timer is selected, the self-timer lamp will blink as the
timer counts down.
Intelligent Face Detection (D)
Because it ensures that the faces of portrait subjects will be in focus, Intelligent Face Detection (pg. 67) is recom-
mended when using the self-timer for group portraits or self-portraits. To use the self-timer with Intelligent Face
Detection, turn Intelligent Face Detection on, set the timer as described in Step 1, and then press the shutter
button all the way down to start the timer. The camera will detect faces while the timer is counting down and
adjust focus and exposure immediately before the shutter is released. Be careful not to move until the picture
has been recorded.
1Note
The self-timer turns off automatically when the picture is taken, a different shooting mode is selected, playback
mode is selected, or the camera is turned off.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options
To view the most recent picture in the monitor,
press the abutton.
Choosing a Display Format
Press the DISP/BACK button to cycle through playback
display formats as shown below.
Press the selector right to view pictures
in the order recorded, left to view pic-
tures in reverse order. Keep the selector
pressed to scroll rapidly to the desired
frame.
Indicators
displayed
Indicators
hidden
C
D
Switching Between
and
Press the 3D button to switch be-
tween C and D display (note
that D pictures are always dis-
played in D). In C playback,
use the Q control to adjust
parallax.
12/31
Sort by date
Hide indicators for improved C viewing.
1Note
Pictures taken using other cameras are indicated by a m (“gift image”) icon during playback.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options
Playback Zoom
Select i to zoom in on pictures displayed in
single-frame playback; select j to zoom out.
When the picture is zoomed in, the selector can
be used to view areas of the image not currently
visible in the display.
Intelligent Face Detection (D Only)
Pictures taken with Intelligent
Face Detection (pg. 67) are in-
dicated by a g icon. Press the
selector down to zoom in on the
subject selected with Intelligent
Face Detection. You can then
Zoom indicator
Navigation window shows
portion of image currently
displayed in monitor
use the zoom control to zoom in and out.
Press DISP/BACK to exit zoom.
1Note
Playback zoom is not available with cropped copies
saved at a size of a or copies created with ORESIZE
(pg. 74).
3 Caution: C Playback
C pictures are best viewed with the camera held
horizontally. The 3D effect may not be visible at high
zoom ratios or when the monitor is viewed at an angle.
If C pictures appear blurred even after parallax is ad-
justed, select D playback.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback Options
Multi-Frame Playback
To change the number of images dis-
played, select j when a picture is
shown full-frame in the monitor.
Sort by Date
Choose sort-by-date mode to view pictures taken
on a selected date.
Press DISP/BACK until the sort-by-date
screen is displayed.
1
Select j to increase the number of
pictures displayed to five, nine, or a
hundred.
3D
12/31
Select ito reduce the number of im-
ages displayed.
Use the selector up or down to
2
highlight a date. Keep the selector
pressed to scroll rapidly to the de-
sired date.
Use the selector to highlight images and press
MENU/OK to view the highlighted image full frame.
In the nine- and hundred-frame displays, press
the selector up or down to view more pictures.
Press the selector left or right to
3
scroll through the pictures taken on
the highlighted date. Keep the se-
lector pressed to scroll rapidly to the
desired frame.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
ADeleting Pictures
The AERASE option in the playback menu can be used to delete still pictures and movies, increasing
the amount of space available on the memory card or in internal memory (for information on deleting
pictures in single-frame playback, see page 20). Note that deleted pictures can not be recovered. Copy
important pictures to a computer or other storage device before proceeding.
2 Tips: Deleting Pictures
Press MENU/OK to display the play-
back menu.
1
2
• When a memory card is inserted, pictures will be de-
leted from the memory card; otherwise, pictures will
be deleted from internal memory.
• Protected pictures can not be deleted. Remove pro-
tection from any pictures you wish to delete (pg. 72).
• If a message appears stating that the selected images
are part of a DPOF print order, press MENU/OK to delete
the pictures.
Press the selector up or down to
highlight AERASE.
Press the selector right to display de-
lete options.
3
4
Press the selector up or down to
highlight FRAME or ALL FRAMES.
Press MENU/OK to display options for
the selected item (pg. 43).
5
42
Download from Www.Somanuals.com. All Manuals Search And Download.
ADeleting Pictures
■ FRAME: Deletingg Sellected IImages
Selecting FRAME displays the
dialog shown at right.
■ ALLLL FFRRAAMMEESS:: DDeelleetting Alll Images
Selecting ALL FRAMES dis-
plays the confirmation shown
at right.
Press the selector left or right
to scroll through pictures and
press MENU/OK to delete the
current picture (the picture is
deleted immediately; be care-
ful not delete the wrong picture).
Highlight OK and press MENU/
OK to delete all unprotected
pictures.
The dialog shown at right is dis-
played during deletion. Press
DISP/BACK to cancel before all
Press DISP/BACK to exit when all the desired pic- pictures have been deleted
tures have been deleted. (any pictures deleted before
the button was pressed can not be recovered).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
FRecording Movies
Shoot short movies. C movies are recorded in 3D movie format (pg. 100), D movies in motion
JPEG format with stereo sound recorded via the built-in microphone (be careful not to cover the mi-
crophone during recording).
Press the Fbutton.
Choosing the Frame Size
1
To choose the frame size when
recording movies to a memory
card, press MENU/OK and select
Display shows time
available
OQUALITY.
Choose
j
(1280×720 pixels) for an aspect
ratio of 16:9 (High Definition), f
(640×480 pixels) for high-quality standard definition
movies, or g (320×240 pixels) for longer movies (if
no memory card is inserted, movies will be recorded
at a frame size of g). Press MENU/OK to return to movie
recording mode.
Use the 3D button to choose
between C and D re-
cording. The current mode
is shown in the monitor.
2
1Note: Auto Parallax
If ON is selected for iAUTO PARALLAX CON-
TROL (pg. 62), parallax will be adjusted automati-
cally when the shutter button is pressed halfway.
If OFF is selected, adjust parallax manually before
recording begins (pg. 15).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
FRecording Movies
Frame the scene using the zoom control.
Press the shutter button halfway to end record-
ing. Recording ends automatically when the
movie reaches maximum length or memory is
full.
3
4
5
Zoom indicator
3 Caution
Zoom can not be adjusted once recording
begins.
The indicator lamp lights while movies are being re-
corded. Do not open the battery chamber cover dur-
ing shooting or while the indicator lamp is lit. Failure to
observe this precaution could prevent the movie from
being played back.
Press the shutter button all the way down to
start recording.
zREC and time
remaining are
displayed
2 Tip
There is no need to keep the shutter button pressed
during recording.
1Note
Focus is set when recording begins; exposure and
white balance are adjusted automatically through-
out recording. The color and brightness of the im-
age may vary from that displayed before recording
begins.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
aViewing Movies
During playback, movies are
displayed in the monitor as
shown at right. The following
operations can be performed
while a movie is displayed:
Progress is shown in the monitor during play-
back.
Progress bar
Operration
Descripption
Start/pause Press the selector down to start playback.
playback Press again to pause.
2 Tip: Viewing Movies on a Computer
Copy movies to the computer before viewing.
End
Press the selector up to end playback. If
playback/ playback is not in progress, pressing the
delete selector up will delete the current movie.
Press the selector right to advance, left to
Advance/ rewind. If playback is paused, the movie
rewind will advance or rewind one frame each
time the selector is pressed.
3 Cautions
• Do not cover the speaker during playback.
• Vertical or horizontal streaks may appear in movies
containing very bright subjects. This is normal and
does not indicate a malfunction.
• HD movies recorded with this camera can not be
viewed on FINEPIX HDP-L1 HD players or FINEPIX
REAL 3D V1 photo frames.
• Movies recorded with this camera can not be viewed
on FINEPIX REAL 3D W1 cameras. This camera can
display movies recorded with the FINEPIX REAL 3D
W1, but can not be used to display such movies on
HDMI devices.
Press MENU/OK to pause playback and dis-
Adjust play volume controls. Press the selector
volume up or down to adjust the volume; press
MENU/OK again to resume playback.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on TV
Connect the camera to a TV and tune the television to the video channel to show pictures to a group.
The optional A/V cable connects as shown below. Turn the camera off before connecting the cable.
Connect yellow plug
to video-in jack
Insert into A/V cable
connector
Connect white plug
to audio-in jack
Press a for about a second to turn the camera on. The camera monitor turns off and pictures are
played back on the TV, with C images displayed in D. Note that the camera volume controls have
no effect on sounds played on the TV; use the television volume controls to adjust the volume.
1Note
Image quality drops during movie playback.
3 Caution
When connecting the cable, be sure the connectors are fully inserted.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a 3D TV
A high-speed HDMI cable (available from third-party suppliers; pg. 86) can be used to connect the
camera to High Definition (HD) devices (playback only).
Insert into HDMI
connector
Insert into HDMI
connector
HDMI Mini Connector
1Note
While an HDMI cable is connected, the television will be used for playback only and the USB cable can not be con-
nected. The display format for HDMI output can be selected from 3D, 2D, and SIDE-BY-SIDE using the wHDMI
OUTPUT option in the setup menu (pg. 83). Note that if the television supports 3D display, playback zoom,
parallax adjustment, and the ORESIZE and GCROP options in the playback menu will not be available and
the following types of C picture will be displayed in D: pictures taken using H, 3D still images and movies
created using MyFinePix Studio, cropped or resized images, and still images and movies for which parallax has
been adjusted using the iPARALLAX CONTROL option in the playback menu (pg. 70).
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
If the printer supports PictBridge, the camera can be connected directly to the printer and
pictures can be printed without first being copied to a computer. Note that depending on the
printer, not all the functions described below may be supported.
Printing in C
C pictures in MPO format can not be printed via direct USB connection, although JPEG copies created when
MPO+JPEG is selected for o3DREC can be printed in D (pg. 85). For information on C prints, visit http://
fujifilm.com/3d/print/.
Connecting the Camera
Connect the supplied USB cable as shown and
turn the printer on.
Press the abutton for about a second to turn
the camera on. t USB will be displayed in
the monitor, followed by the PictBridge display
shown below at right.
1
2
1Notes
• Print pictures from internal memory or a memory card that has been formatted in the camera.
• Default printer page size and print quality settings are used when printing via direct USB connection.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
Printing Selected Pictures
Press the selector left or right to dis-
play a picture you wish to print.
Press MENU/OK to display a confirma-
tion dialog.
1
3
4
1Note
To print one copy of the current picture, proceed
directly to Step 3.
Press the selector up or down to
2
choose the number of copies (up to
99). Repeat steps 1–2 to select addi-
tional pictures.
Press MENU/OK to start printing.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
2 Tip: Printing the Date of Recording
During Printing
To print the date of recording on pictures, press DISP/
BACK in steps 1–2 to display the PictBridge menu (see
“Printing the DPOF Print Order,” below). Press the se-
lector up or down to highlight PRINT WITH DATE s
and press MENU/OK to return to the PictBridge display
(to print pictures without the date of recording, select
PRINT WITHOUT DATE). To ensure that the date is cor-
rect, set the camera clock before taking pictures. Note
that the PRINT WITH DATE s option is only available
with printers that support date printing.
The message shown at right is
displayed during printing. Press
DISP/BACK to cancel before all
pictures are printed (depending
on the printer, printing may end
before the current picture has printed).
If printing is interrupted, press ato turn the camera
off and then on again.
Disconnecting the Camera
Confirm that the above message is not displayed and
turn the camera off. Disconnect the USB cable.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
Printing the DPOF Print Order
To print the print order created with KPRINT ORDER (DPOF) in the playback menu (pg. 69):
In the PictBridge display, press DISP/
BACK to open the PictBridge menu.
Press MENU/OK to display a confirma-
tion dialog.
1
2
3
Press the selector up or down to
highlight u PRINT DPOF.
Press MENU/OK to start printing.
4
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
Creating a DPOF Print Order
The KPRINT ORDER (DPOF) option in the play- Press MENU/OK and follow the steps below.
back menu can be used to create a digital “print
Press the selector left or right to dis-
1
order” for PictBridge-compatible printers (pg. 49)
play a picture you wish to include in
or devices that support DPOF.
or remove from the print order.
DPOF
Press the selector up or down to
2
DPOF (Digital Print Order Format) is standard
choose the number of copies (up
that allows pictures to be printed from “print
to 99). To remove a picture from the
orders” stored in internal memory or on a
memory card. The information in the order includes
the pictures to be printed and the number of copies
of each picture.
order, press the selector down until
the number of copies is 0.
Total number of prints
Number of copies
■ WITH DAATE s/ WWITHOUT DATE
To modify the DPOF print order, select KPRINT
ORDER (DPOF) in the playback menu and press
the selector up or down to highlight WITH
DATE s or WITHOUT DATE.
2 Tip: Intelligent Face Detection
If the current picture was created with Intelligent
Face Detection (pg. 67), pressing the selector down
sets the number of copies to the number of faces
detected.
WITH DATE s: Print date of record-
ing on pictures.
WITHOUT DATE: Print pictures without
date.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB (D Only)
Repeat steps 1–2 to complete the
print order. Press MENU/OK to save
the print order when settings are complete,
or DISP/BACK to exit without changing the print
order.
■ RESET AALL
3
4
To cancel the current print or-
der, select RESET ALL in the
KPRINT ORDER (DPOF)
menu. Theconfirmationshown
at right will be displayed; press
The total number of prints is dis-
played in the monitor. Press MENU/OK
to exit.
MENU/OK to remove all pictures from the order.
1Notes
• Remove the memory card to create or modify a print
order for the pictures in internal memory.
• Print orders can contain a maximum of 999 pictures.
The pictures in the current
print order are indicated by a
u icon during playback.
• If a memory card is inserted con-
taining a print order created by
another camera, the message
shown at right will be displayed.
Pressing MENU/OK cancels the
print order; a new print order
must be created as described above.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a Computer
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,
organized, and printed. Before proceeding, install the software as described below. Do NOT connect the
camera to the computer until installation is complete.
Installing the Software
Confirm that the computer meets the following system requirements:
1
Windows 7*
Windowss Vista*
Windoows XP*
2GHz Pentium 4 or better†
512MB or more‡
CPU
RAM
3GHz Pentium 4 or better†
1GB or more
15GB or more
Free disk space
2GB or more
• 1024×768 pixels or more with 24-bit color or better
• A graphics processing unit (GPU) that supports DirectX 7 or later
Video
• Built-in USB port recommended. Operation is not guaranteed with other USB ports.
Other
• Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use
auto update feature, and when performing such tasks as sharing pictures online or via e-mail.
* Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.
† 2.4GHz Core Duo 2 or better recommended when viewing C HD movies.
‡ 1GB or more recommended when viewing C HD movies.
Start the computer. Log in to an account with administrator privileges before proceeding.
2
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a Computer
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.
3
Windows 7/Windows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;
click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-
structions to install MyFinePix Studio.
If the Installer Does Not Start Automatically
If the installer does not start automatically, select Computer or My Computer from the Start menu, then
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.
If prompted to install Windows Media Player, DirectX, or .NET Framework, follow the on-screen in-
structions to complete installation.
4
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer
CD in a dry location out of direct sunlight in case you need to re-install the software. The version
number is printed at the top of the CD label for reference when updating the software or contacting
customer support.
Installation is now complete. Proceed to “Connecting the Camera” on page 57.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a Computer
Connecting the Camera
If the pictures you wish to copy are stored on a
Press the abutton for about a second to turn
the camera on. MyFinePix Studio will start au-
tomatically; follow the on-screen instructions
to copy pictures to the computer. To exit with-
out copying pictures, click Cancel.
1
3
memory card, insert the card into the camera
(pg. 10). If no card is inserted, pictures will be
copied from internal memory.
1Note
The Windows CD may be required when the soft-
ware is started for the first time.
3 Caution
If the software does not start automatically, it may
not be correctly installed. Disconnect the camera
and reinstall the software.
3 Caution
Loss of power during transfer could result in loss of
data or damage to internal memory or the memory
card. Charge the battery before connecting the
camera.
For more information on using the supplied soft-
ware, start the application and select the appro-
priate option from the Help menu.
Turn the camera off and connect the supplied
2
USB cable as shown, making sure the connec-
tors are fully inserted. Connect the camera di-
rectly to the computer; do not use a USB hub
or keyboard.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a Computer
3 Cautions
• If a memory card containing a large number of images is inserted, there may be a delay before the software
starts and you may be unable to import or save images. Use a memory card reader to transfer pictures.
• Make sure that the computer does not display a message stating that copying is in progress and that the indica-
tor lamp is out before turning the camera off or disconnecting the USB cable (if the number of images copied is
very large, the indicator lamp may remain lit after the message has cleared from the computer display). Failure
to observe this precaution could result in loss of data or damage to internal memory or the memory card.
• Disconnect the camera before inserting or removing memory cards.
• In some cases, it may not be possible to access pictures saved to a network server using the supplied software
in the same way as on a standalone computer.
• The user bears all applicable fees charged by the phone company or Internet service provider when using ser-
vices that require an Internet connection.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Pictures on a Computer
Disconnecting the Camera
After confirming that the indicator lamp is out, follow the on-screen instructions to turn the camera off and
disconnect the USB cable.
Uninstalling the Supplied Software
Only uninstall the supplied software when it is no longer required or before beginning reinstallation. After quitting
the software and disconnecting the camera, open the control panel and use “Programs and Features” (Windows
7/Windows Vista) or “Add or Remove Programs” (Windows XP) to uninstall MyFinePix Studio. One or more confir-
mation dialogs may be displayed; read the contents carefully before clicking OK.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
The shooting menu is used to adjust settings for a wide range of shooting conditions.
Using the Shooting Menu
Press MENU/OK to display the shoot-
ing menu.
Press the selector up or down to
highlight the desired option.
1
2
4
Press the selector up or down to
highlight the desired menu item.
Press MENU/OK to select the high-
lighted option.
5
6
Press the selector right to display op-
tions for the highlighted item.
Press DISP/BACK to exit to shooting
mode.
3
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
Shooting Menu Options
Menu item
Descripption
Opptions
Default
E/C/D/L/M/N/O/ SP1: C
ASCENE POSITION
Choose scenes for SP1 and SP2 modes (pg. 22).
Choose a D shooting mode for I mode (pg. 27).
Choose a C shooting mode for H mode (pg. 29).
H/Q/R/S/F/U
V/X/W
SP2: E
ASHOOTING MODE
(advanced D)
ASHOOTING MODE
(advanced C)
V
B/A
A
a
Choose color reproduction options for pictures recorded us-
ing X 2-COLOR (pg. 28).
Choose the time lag for pictures recorded with B INTERVAL
3D SHOOTING (pg. 31).
Choose the order in which pictures are taken in H mode
j2-COLOR SETTING
k3D INTERVAL TIME
lTURN
a/b/c
MIN. /1.0 /1.5 /2.0 /3.0 /5.0 /10
G/H
MIN.
G
(pg. 30, 31).
dSET SHUTTERSPEED,
APERTURE.
Adjust exposure for bright, dark, or high-contrast scenes in
dSETTING APERTURE modes M, A, and P (pp. 24–26).
—
—
dEXP. COMPENSATION
AUTO (1600) /AUTO (800) /
AUTO (400) /1600 /800 /400 / AUTO (800)
200 /100
Adjust ISO sensitivity (pg. 63). Choose higher values when the
subject is poorly lit.
NISO
O 4 : 3 /O 3 : 2 /O 16 : 9 /
P 4 : 3 /P 3 : 2 /P 16 : 9 /
Q 4 : 3 /Q 3 : 2 /Q 16 : 9
OIMAGE SIZE
Choose image size and aspect ratio (pg. 64).
Choose image quality (pg. 65).
O 16 : 9
TIMAGE QUALITY
F /N
N
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
Menu item
Descripption
Opptions
Default
Shoot pictures in standard or saturated color or in black-and-
white (pg. 65).
PFINEPIX COLOR
c/a/b
>
DWHITE BALANCE
RCONTINUOUS
Adjust color for different light sources (pg. 66).
Shoot a series of pictures (pg. 66).
AUTO/i/j/k/l/m/n/g
J/I/OFF
AUTO
OFF
Choose whether the camera automatically detects and sets
focus and exposure for human portrait subjects. Can be
combined with red-eye removal (pg. 67).
bFACE DETECTION
ON /OFF
OFF
CPHOTOMETRY
F2D AF MODE
Choose how the camera meters exposure (pg. 68).
Choose how the camera selects a focus area (pg. 68).
o/p/q
r/s
o
r
iAUTO PARALLAX
Choose ON for auto C parallax adjustment (pg. 15).
ON/OFF
ON
CONTROL
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
NISO
Control the camera’s sensitivity to light. Higher values can be used to reduce blur when lighting is
poor; note, however, that mottling may appear in pictures taken at high sensitivities. If AUTO (1600),
AUTO (800), or AUTO (400) is selected, the camera will adjust sensitivity automatically in response to
shooting conditions. The maximum values that will be selected by the camera at settings of AUTO
(1600), AUTO (800), and AUTO (400) are 1600, 800, and 400 respectively.
1Note
Sensitivity is not reset when the camera is turned off.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
OIMAGE SIZZE
Choose the size and aspect ratio at which still pic-
tures are recorded. Large pictures can be printed
at large sizes with no drop in quality; small pic-
tures require less memory, allowing more pictures
to be recorded.
Aspect Ratio
Pictures with an aspect ratio of 4:3 have the same
proportions as the camera display. Pictures with an
aspect ratio of 3:2 have the same proportions as a
frame of 35-mm film, while an aspect ratio of 16:9 is
suited to display on High Definition (HD) devices.
Opption
O 4 : 3
O 3 : 2
O 16 : 9
P 4 : 3
P 3 : 2
P 16 : 9
Q 4 : 3
Q 3 : 2
Q 16 : 9
Prints at ssizes up tto
31×23cm (12×9in.)
31×21cm (12×8in.)
30×17cm (12×7in.)
22×16cm (9×6in.)
22×15cm (9×6in.)
22×12cm (9×5in.)
17×13cm (7×5in.)
17×11cm (7×4in.)
16×9cm (6×4in.)
4 : 3
3 : 2
16 : 9
The number of pictures that can be taken at cur-
rent settings (pg. 102) is shown in the monitor.
1Note
Image size is not reset when the camera is turned off or
another shooting mode is selected.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
TIMAGE QUALIITY
PFINEPPIIX COLOR
Choose how much image files are compressed. Enhance contrast and color saturation or take pic-
Select FINE (low compression) for higher image tures in black and white.
quality, NORMAL (high compression) to increase
Opption
Displaayed in
Standard contrast and saturation.
Recommended in most situations.
the number of pictures that can be stored.
cF-STANDARD
Vivid contrast and color. Choose
for vivid shots of flowers or en-
hanced greens and blues in land-
scapes. Not available in SP mode.
aF-CHROME
bF-B&W
Take pictures in black and white.
Settings other than cF-STANDARD are shown
by an icon in the monitor.
1Notes
• PFINEPIX COLOR is not reset when the camera is
turned off or another shooting mode is selected.
• Depending on the subject, the effects of aF-
CHROME may not be visible in the monitor.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
DWHITTEE BBALLANNCCE
RCONTINNUOUS
For natural colors, choose a setting that matches Capture motion in a series of pictures.
the light source (for an explanation of “white bal- • J TOP 40 (HIGH SPEED): The camera takes up to 40
ance,” see the Glossary on page 101).
pictures at high speed while the shutter button
is pressed. Not available in C.
• I TOP 40: The camera takes up to 40 pictures
while the shutter button is pressed.
• OFF: The camera takes one picture each time the
shutter button is pressed.
Opption
AUTO
i
Descripption
White balance adjusted automatically.
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under “daylight” fluorescent lights.
Use under “warm white” fluorescent lights.
Use under “cool white” fluorescent lights.
Use under incandescent lighting.
For underwater subjects in an aquarium.
1Notes
l
• The flash turns off automatically. The previously-se-
lected flash mode is restored when OFF is selected
for RCONTINUOUS.
m
n
g
• Frame rate varies with shutter speed.
If AUTO does not produce the desired results (for
example, when taking close-ups), choose the op-
tion that matches the light source.
1Notes
• Auto white balance is used with the flash. Turn the
fl a s h o ff (pg. 35) to take pictures at other settings.
• Results vary with shooting conditions. Play pictures
back after shooting to check colors in the monitor.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
bFACEE DETEECCTTIIOONN ((D Only)
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for
group portraits (in vertical or horizontal orientations) to prevent the camera from focusing on the back-
ground.
2 Tip: Intelligent Face Detection
When Intelligent Face Detection is on, the selected face is indicated by a green border (note
that, in some shooting modes, exposure is adjusted for the current shooting mode and may
not be optimized for the selected subject). If more than one face is detected, the camera
will select the face closest to the center of the frame; other faces are indicated by white bor-
ders (note that some time may be required for face detection if the number of faces is very
large). Intelligent Face Detection is recommended when using the self-timer for group- or
self-portraits (pg. 38).
Green border
When a picture taken with Intelligent Face Detection is displayed, the camera can automatically select faces for
red-eye removal (pg. 71), playback zoom (pg. 40), slide shows (pg. 70), printing (pg. 53), and cropping (pg. 73).
3 Cautions
• If no face is detected when the shutter button is pressed halfway (pg. 19), the camera will focus on the subject
at the center of the display and red-eye will not be removed.
• If the subject moves as the shutter button is pressed, their face may not be in the area indicated by the green
border when the picture is taken.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
CPHOTOMMETRY
Choose how the camera meters exposure when This option controls how the camera selects the
Intelligent Face Detection (pg. 67) is off. focus area when Intelligent Face Detection (pg.
F2D AF MODE (D Only)
• o MULTI: Automatic scene recognition is used 67) is off. Regardless of the option selected, the
to adjust exposure for a wide range of shooting camera will focus on the subject in the center of
conditions.
the monitor when macro mode is on (pg. 34).
• p SPOT: The camera meters lighting conditions • r CENTER: The camera focuses on the subject in
at the center of the frame. Recommended when
the background is much brighter or darker than
the center of the frame. This option can be used
with focus lock (pg. 32).
the main subject. Can be used with focus lock • s MULTI: When the shutter button is pressed
(pg. 32) to meter off-center subjects.
halfway, the camera detects high-contrast sub-
jects near the center of the frame and selects
the focus area automatically (if the focus frame is
not displayed, select r CENTER and use focus
lock; pg. 32).
• q AVERAGE: Exposure is set to the average for
the entire frame. Provides consistent exposure
across multiple shots with the same lighting,
and is particularly effective for landscapes and
portraits of subjects dressed in black or white.
M
Press
halfway
Focus frame
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
The playback menu is used to manage the pictures in internal memory or on the memory card.
Using the Playback Menu
Playback Menu Options
Opption
Descripption
Press the a button to enter play-
1
Create copies of
C
pictures with
back mode.
iPARALLAX CONTROL
modified parallax (pg. 70).
Press MENU/OK to display the play-
back menu.
AERASE
ISLIDE SHOW
Delete all or selected pictures (pg. 42).
View pictures in a slide show (pg. 70).
Create copies with reduced red eye (pg.
71).
Protect pictures from accidental dele-
tion (pg. 72).
2
BRED EYE REMOVAL
DPROTECT
Press the selector up or down to
highlight the desired menu item.
3
Create cropped copies of pictures (pg.
73).
Create small copies of pictures (pg. 74).
Rotate pictures (pg. 75).
Copy pictures between internal memo-
ry and a memory card (pg. 76).
Press the selector right to display op-
tions for the highlighted item.
GCROP
4
ORESIZE
CIMAGE ROTATE
Press the selector up or down to
highlight the desired option.
5
ECOPY
Select pictures for printing on DPOF-
and PictBridge-compatible devices
(pg. 52, 53).
KPRINT ORDER
Press MENU/OK to select the high-
lighted option.
6
(DPOF)
Press DISP/BACK to exit to playback.
7
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
iPARALLLAAXX CCOONNTTROOLL ((C Only)
ISLIDE SHOW
If the current picture is marked with a g icon to View pictures in an automated slide show. Choose
indicate that it was taken in C, this option can be the type of show and press MENU/OK to start. Press
used to create a copy with modified parallax.
DISP/BACK at any time during the show to view on-
screen help. When a movie is displayed, movie play-
back will begin automatically, and the slide show
will continue when the movie ends. The show can
be ended at any time by pressing MENU/OK.
Use the
Q
control to adjust
parallax (pg. 15), and then
select iPARALLAX CON-
TROL in the playback menu to
display the options shown at
Opption
Displaayed in
Press selector left or right to go back or
skip ahead one frame. Select FADE-IN
for fade transitions between frames.
As above, except that camera automati-
cally zooms in on faces selected with
Intelligent Face detection.
NORMAL
right. Press MENU/OK to create a copy with modi-
fi e d p a r a lla x .
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE Display several pictures at once.
3D FADE C images fade in from D to C.
1Note
The camera will not turn off automatically while a slide
show is in progress.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
BRED EYE REMMOVAL (D Only)
If the current picture is marked with a gicon to indicate that it was taken with Intel-
ligent Face Detection, this option can be used to remove red-eye. Press MENU/OK to
analyze the image; if red-eye is detected, the image will be processed to create a
copy with reduced red-eye.
1Notes
• Red eye may not be removed if the camera is unable to detect a face or the face is in profile. Results may differ
depending on the scene. Red eye can not be removed from pictures that have already been processed using
red-eye removal or pictures created with other devices.
• The amount of time needed to process the image varies with the number of faces detected.
• Copies created with BRED EYE REMOVAL are indicated by a e icon during playback.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
DPROTECT
Protect pictures from accidental deletion. The following options are available.
■ FRAME
Protect selected pictures.
■ SET ALL
Press MENU/OK to protect all
pictures, or press DISP/BACK to
exit without changing picture
status.
Press the selector left or right to dis-
play the desired picture.
1
■ RESET AALL
Press MENU/OK to remove pro-
tection from all pictures, or
press DISP/BACK to exit without
changing picture status.
Picture not protected
Protected picture
Press MENU/OK to protect the picture.
If the picture is already protected,
pressing MENU/OK will remove pro-
tection from the image.
2
3
If the number of pictures affected is very large, a
message will be displayed while the operation is
in progress. Press DISP/BACK to exit before the op-
eration is complete.
Repeat steps 1–2 to protect addi-
tional images. Press DISP/BACK to exit
when the operation is complete.
3 Caution
Protected pictures will be deleted when the memory
card or internal memory is formatted (pg. 82).
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
GCROOP
To create a cropped copy of a picture, play the picture back and select GCROP in the playback
menu.
Use the zoom control to zoom in and out and
use the selector to scroll the picture until the
desired portion is displayed (to exit to single-
frame playback without creating a cropped
copy, press DISP/BACK).
Press MENU/OK to view the copy size.
Larger crops produce larger copies;
all copies have an aspect ratio of 4:3.
1
2
3
Press MENU/OK to save the cropped
copy to a separate file.
Zoom indicator
Navigation window
shows portion of im-
age currently displayed
in monitor
If the size of the final copy will be a, YES will
be displayed in yellow.
2 Tip: Intelligent Face Detection (D Only)
If the picture was shot with In-
telligent Face Detection (pg.
67), gwill be displayed in the
monitor. Press the selector
down to zoom in on the se-
lected face.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
ORESIZE
To create a small copy of a picture, play the picture back and select ORESIZE in the playback menu.
Press the selector up or down to high-
light a STANDARD or b SMALL.
Press MENU/OK to select the high-
lighted option.
1
2
3
Press MENU/OK to copy the picture at
the selected size.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
CIMAGE ROOTATE (D Only)
By default, pictures taken in tall orientation are
displayed in wide orientation. Use this option to
display pictures in the correct orientation in the
monitor. It has no effect on pictures displayed on
a computer or other device.
Press the selector down to rotate the
picture 90° clockwise, up to rotate
the picture 90° counterclockwise.
1
2
1Notes
• C images and protected pictures can not be rotat-
ed. Remove protection before rotating D images
(pg. 72).
• The camera may not be able to rotate pictures cre-
ated with other devices.
To rotate a picture, play the picture back and se-
lect CIMAGE ROTATE in the playback menu.
Press MENU/OK to confirm the opera-
tion (to exit without rotating the pic-
ture, press DISP/BACK).
The next time the picture is played back, it will
automatically be rotated.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
ECOPY
Copy pictures between internal memory and a memory card.
Press the selector up or down to
highlight a INTERNAL MEMORY
y b CARD (copy from internal
memory to the memory card) or b CARD y
a INTERNAL MEMORY (copy from a memo-
ry card to internal memory).
Press the selector up or down to
highlight FRAME or ALL FRAMES.
1
3
Press MENU/OK.
4
2 Tip: Copying Pictures Between Memory Cards
To copy pictures between two memory cards, insert
the source card and copy the pictures to internal mem-
ory, then remove the source card, insert the destination
card, and copy the pictures from internal memory.
Press the selector right to display op-
tions for the highlighted item.
2
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Playback Mode
■ FRAME
Copy selected frames.
■ ALLL FFRRAAMESS
Press MENU/OK to copy all pic-
tures, or press DISP/BACK to exit
without copying pictures.
3 Cautions
• Copying ends when the destination is full.
• DPOF print information is not copied (pg. 53).
Press the selector left or right to dis-
play the desired picture.
1
Press MENU/OK to copy the picture.
2
3
Repeat steps 1–2 to copy additional
images. Press DISP/BACK to exit when
the operation is complete.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Using the Setup Menu
Display the setup menu.
Adjust settings.
1 1.1 Press
2 2.1 Press the selector up or down
MENU/OK to display the
menu for the current mode.
to highlight a menu item.
1.2 Press the selector left to high-
light the tab for the current
menu.
2.2Press the selector right to dis-
play options for the highlighted
item.
1.3 Press the selector down to
2.3 Press the selector up or down
highlight the setup menu tab.
to highlight an option.
1.4 Press the selector right to dis-
play the setup menu.
2.4 Press MENU/OK to select the
highlighted option.
Exit.
3 Press DISP/BACK to exit the menus.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Setup Menu Options
Menu item
Descripption
Set the camera clock (pg. 13).
Set the clock to local time (pg. 81).
Opptions
—
h/g
Default
—
h
FDATE/TIME
NTIME DIFFERENCE
La
Choose a language (pg.13).
See page 105
ENGLISH
OFF
Select ON in situations in which camera sounds or lights may be
unwelcome (pg. 18).
oSILENT MODE
ON /OFF
Reset all settings except FDATE/TIME, NTIME DIFFERENCE,
O BACKGROUND COLOR, QVIDEO SYSTEM, and sDEMO
MODE to default values. A confirmation dialog will be displayed,
press the selector left or right to highlight OK and press MENU/OK.
Format internal memory or memory cards (pg. 82).
Choose how long pictures are displayed after shooting (pg. 82).
Choose how files are named (pg. 83).
Adjust the volume of camera controls.
Adjust the volume of the shutter sound.
Choose the sound made by the shutter.
Press the selector up or down to adjust playback volume and press
RRESET
—
—
—
—
KFORMAT
AIMAGE DISP.
BFRAME NO.
GOPERATION VOL.
HSHUTTER VOLUME
eSHUTTER SOUND
3 SEC /1.5 SEC / ZOOM /OFF 1.5 SEC
CONT. /RENEW
b (high) /c (mid) /
d (low) /eOFF (mute)
CONT.
c
i
7
i/j
IPLAYBACK VOLUME
JLCD BRIGHTNESS
—
MENU/OK to select.
Press the selector up or down to adjust monitor brightness and
press MENU/OK to select.
—
0
MAUTO POWER OFF
BRED EYE REMOVAL
DDIGITAL ZOOM
qOPT AXIS CONTROL
o3DREC
Choose the auto power off delay (pg. 84).
Turn red-eye removal on or off (pg. 36).
Enable or disable digital zoom (pg. 84).
Align the optical axes of the twin lenses (pg. 85).
Choose MPO+JPEG to save JPEG copies of C images (pg. 85).
5 MIN /2 MIN /OFF
ON /OFF
ON /OFF
—
MPO+JPEG /MPO
2 MIN
OFF
OFF
0
MPO+JPEG
79
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
Menu item
Descripption
Opptions
Default
OFF
Choose whether to save unprocessed copies of pictures taken ON
selected for BRED EYE REMOVAL (pg. 79).
nSAVE ORG IMAGE
ON /OFF
OBACKGROUND COLOR Choose a color scheme for menus and cursors.
cGUIDANCE DISPLAY Choose whether to display tool tips.
—
ON /OFF
—
ON
Disable C to prevent fatigue or display a warning after 30 min-
utes of use (pg. 85).
r3D CAUTION DISP
ON /OFF /NOT 3D
ON
QVIDEO SYSTEM
wHDMI OUTPUT
Choose a video mode for connection to a TV.
Choose a display format for output to HDMI devices (pg. 83).
NTSC /PAL
3D /SIDE-BY-SIDE /2D
—
3D
Optimize camera performance for increased battery life or quick
focus (pg. 14).
SPOWER MANAGEMENT
v/w/p
v
If ON is selected when the camera is powered by an AC power
adapter, a demo will play when the camera is turned on. Press the
shutter button to exit demo mode.
sDEMO MODE
ON /OFF
ON
80
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
NTIME DIFFFERENCE
When traveling, use this option to switch the camera clock instantly from your home time zone to the
local time at your destination.
Specify the difference between local time
Switch between local time and your home
1 and your home time zone.
2 time zone.
To set the camera clock to local time, high-
light g LOCAL and press MENU/OK. To set
the clock to the time in your home time
zone, select h HOME. If g LOCAL is se-
lected, g will be displayed in the monitor
for three seconds after the camera enters
shooting mode, and the date will be dis-
played in yellow.
1.1 Press the selector up or down
to highlight g LOCAL.
1.2 Press the selector right to dis-
play the time difference.
1.3 Press the selector left or right
to highlight +, –, hours, or min-
utes; press up or down to edit.
The minimum increment is 15 minutes.
3D
1.4 Press MENU/OK when settings
are complete.
After changing time zones, check that the
date and time are correct.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
KFORMAT
AIMAGEE DIISSP.
Format internal memory or a memory card. If a Choose how long pictures are displayed in the
memory card is inserted in the camera, this op- monitor after shooting.
tion will format the memory card. If no memory • 3 SEC/1.5 SEC: Pictures are displayed for the speci-
card is inserted, a will be displayed in the format
dialog and this option will format internal mem-
ory. Press the selector left to highlight OK and
press MENU/OK to begin formatting.
fied time before being recorded to the memory
card. Colors may differ from those in the final
picture.
• ZOOM (CONTINUOUS): Pictures are displayed until
the MENU/OK button is pressed. Pictures can be
zoomed in to check fine details. Not available
in C or I mode or when an option oth-
er than OFF is selected for RCONTINUOUS
(pg. 66).
3 Cautions
• All data—including protected pictures—will be de-
leted. Be sure important files have been copied to a
computer or other storage device.
• Do not open the battery-chamber cover during for-
matting.
• OFF: Pictures are not automatically displayed af-
ter shooting.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
BFRAME NO.
wHDMII OOUTPUT
Choose a display format for output to HDMI de-
vices.
• 3D: Choose for output to devices that support
3D display.
• SIDE-BY-SIDE: Choose for output to devices that
support side-by-side 3D display. Be sure to con-
figure the television for side-by-side display as
described in the television manual.
Frame number
New pictures are stored in im-
age files named using a four-
digit file number assigned
by adding one to the last file
number used. The file num-
ber is displayed during playback as shown at
right. BFRAME NO. controls whether file num-
bering is reset to 0001 when a new memory card
100-0001
Directory
number
File
number
is inserted or the current memory card or internal • 2D: Choose for output to High Definition (HD)
memory is formatted.
devices.
• CONTINUOUS: Numbering continues from the last
file number used or the first available file num-
ber, whichever is higher. Choose this option to
reduce the number of pictures with duplicate
fi le n a m e s .
• RENEW: Numbering is reset to 0001 after format-
ting or when a new memory card is inserted.
1Notes
• If the frame number reaches 999-9999, the shutter
release will be disabled (pg. 98).
• Selecting RRESET (pg. 79) resets BFRAME NO. to
CONTINUOUS but does not reset frame numbering.
• Frame numbers for pictures taken with other cam-
eras may differ.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
MAUTO POWWEERR OFFF
DDIGITAL ZZOOM (D Only)
Choose the length of time before the camera If ON is selected, selecting i at the maximum
turns off automatically when no operations are optical zoom position will trigger digital zoom,
performed. Shorter times increase battery life; if further magnifying the image. To cancel digital
OFF is selected, the camera must be turned off zoom, zoom out to the minimum digital zoom
manually (note that the camera will turn off au- position and select j.
tomatically after five minutes if p QUICK AF is
selected for SPOWER MANAGEMENT or if the
Zoom
camera enters standby while in movie mode). Re-
indicator
gardless of the option selected, the camera will
not turn off automatically when connected to a
printer (pg. 49) or computer (pg. 57) or when a
slide show is in progress (pg. 70).
Zoom indicator,
DIGITAL ZOOM off
Zoom indicator,
DIGITAL ZOOM on
j
i j
i
2 Tip: Reactivating the Camera
To reactivate the camera after it has turned off auto-
matically, open the lens cover or press the abutton
for about a second (pg. 12).
Optical zoom
Optical zoom
Digital
zoom
3 Caution
Digital zoom produces lower quality images than opti-
cal zoom.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
The Setup Menu
qOPT AXIS CONTROOLL
r3D CAUTIOON DIISP
Reposition the lenses to verti-
cally align their optical axes for
C photography. A setting
of 0 is recommended in most
circumstances; to choose a dif-
To prevent fatigue, C can be disabled or a warn-
ing can be displayed after prolonged use.
• ON: C enabled, but a warning is displayed after
30 minutes of continuous use (measured from
when this option is selected or the start of C
display).
ferent setting, press the selector up or down and
press MENU/OK to select. Positive values raise the • OFF: C enabled with no warning displayed af-
left lens.
ter prolonged use.
• NOT 3D DISP: C disabled.
o3DREC
Choose MPO to save C images in multi-picture
(MPO) format, MPO+JPEG to save a JPEG copy in
addition to the multi-picture file. For information
on file formats, see the Glossary on page 100.
1Note
MPO files can not be printed in D (pg. 49). The sup-
plied MyFinePix Studio is required to view MPO files on
a computer (pg. 55).
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.
■ Computer Related
■ Digitaall VViewers
Note: DirectX 8.0 runtime required to view
movies (Windows only). Movies must be cop-
ied to computer before viewing.
FINEPIX
REAL 3D W3
FinePix REAL 3D V1
(sold separately)
USB cable (supplied)
■ Auddiioo//VVisual
SD card slot or card reader
A/V cable (sold separately)
SD/SDHC
memory card
Computer (available from
third-party suppliers)
Standard TV (available from
third-party suppliers)
■ Printing
USB cable
(supplied; D
HDMI cable (sold separately)
images only)
3D HDTV (available from
third-party suppliers)
PictBridge-compatible printer
(available from third-party suppliers)
HDMI cable (sold separately)
HDMI cable
(sold separately)
Printer (available from
third-party suppliers)
HDP-L1
HD player
HDTV (available from
third-party suppliers)
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the latest information on the acces-
sories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.
com/products/digital_cameras/index.html.
Rechhaarggeeaablle
Li-ion batteriies
Additional NP-50 rechargeable batteries can be
purchased as required.
NP-50
Replacement battery chargers can be purchased as
required. The BC-45W charges an NP-50 battery in
about 150 minutes at +20°C (+68°F).
Batttteerryy cchhaarrgeers BC-45W
Use for extended playback or when copying pic-
tures to a computer (shape of adapter and plug
vary with region of sale).
AC-5VX (requires CP-50
DC coupler)
AC power addaaptters
DC coouuplers
CP-50 (for use with AC-5VX
AC power adapter)
Connect the AC-5VX to the camera.
HDP-L1 (requires HDMI
cable, available from third-
party suppliers)
Connect to a High Definition (HD) TV to view pho-
tographs and movies from SD memory cards.
HD players
AV cables
AVC-1
Connect the camera to video devices.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Caring for the Camera
To ensure continued enjoyment of the product, observe the following precautions.
Sttorage aanndd UUse
■ Condeennssatioonn
If the camera will not be used for an extended pe-
riod, remove the battery and memory card. Do
not store or use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
• exposed to direct sunlight or very high tempera-
tures, such as in a closed vehicle on a sunny day
• extremely cold
Sudden increases in temperature, such as occur
when entering a heated building on a cold day,
can cause condensation inside the camera. If this
occurs, turn the camera off and wait an hour be-
fore turning it on again. If condensation forms on
the memory card, remove the card and wait for
the condensation to dissipate.
Cleaning
• subject to strong vibration
Use a blower to remove dust from the lens and
monitor, then gently wipe with a soft, dry cloth.
Any remaining stains can be removed by wiping
gently with a piece of FUJIFILM lens-cleaning pa-
per to which a small amount of lens-cleaning fluid
has been applied. Care should be taken to avoid
scratching the lens or monitor. The camera body
can be cleaned with a soft, dry cloth. Do not use
alcohol, thinner, or other volatile chemicals.
• exposed to strong magnetic fields, such as near
a broadcasting antenna, power line, radar emit-
ter, motor, transformer, or magnet
• in contact with volatile chemicals such as pesti-
cides
• next to rubber or vinyl products
■ Water and Saannd
Exposure to water and sand can also damage the
camera and its internal circuitry and mechanisms.
When using the camera at the beach or seaside,
avoid exposing the camera to water or sand. Do
not place the camera on a wet surface.
Traveling
Keep the camera in your carry-on baggage.
Checked baggage may suffer violent shocks that
could damage the camera.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Power and Battery
Problem
Possiblle cause
The battery is exhausted.
Solluution
Charge the battery or insert a fully-charged
spare battery.
Page
5, 6
The battery is not in the correct orientation. Reinsert the battery in the correct orientation.
The battery-chamber cover is not latched. Latch the battery-chamber cover.
6
6–7
The camera does
not turn on.
The AC power adapter and DC coupler are Make sure that the AC power adapter and DC
8
not connected properly.
The battery is cold.
coupler are properly connected.
Warm the battery by placing it in a pocket or
other warm place and re-insert it in the camera vi
immediately before taking a picture.
Power
supply
There is dirt on the battery terminals.
Clean the terminals with a soft, dry cloth.
The battery has reached the end of its charging
life. Purchase a new battery.
—
The battery runs
down quickly.
The battery has been charged many times.
—
p QUICK AF is selected for SPOWER Select a power saving option to reduce the
80
5, 6
8
MANAGEMENT.
drain on the battery.
Charge the battery or insert a fully-charged
spare battery.
The battery is exhausted.
The camera turns
off suddenly.
The AC power adapter or DC coupler has Make sure that the AC power adapter and DC
been disconnected.
coupler are properly connected.
The battery is not correctly inserted.
The battery is not in the correct orientation. Reinsert the battery in the correct orientation.
Reinsert the battery in the charger.
5
5
Charging does
not start.
Charging is slow. The temperature is low.
Charge the battery at room temperature.
Clean the terminals with a soft, dry cloth.
The battery has reached the end of its charging
vi
—
Battery
charger
There is dirt on the battery terminals.
The charging
lamp lights, but
the battery does
not charge.
The battery has been charged many times. life. Purchase a new battery. If the battery still vi
fails to charge, contact your FUJIFILM dealer.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Menus and Displays
Problem
Menus and displays are not English is not selected for the La
Possiblle cause
Solluution
Solluution
Page
Select ENGLISH.
Select OFF or ON.
79
in English.
option in the setup menu.
C/D
Problem
Possiblle cause
NOT 3D DISP is selected for r3D CAU-
TION DISP .
Page
C mode not available.
85
C display not available in v POWER SAVE 1 is selected for SPOW-
Select another power management option.
80
C mode.
ER MANAGEMENT.
Shooting
Problem
Possiblle cause
Solluution
Page
Memory is full.
Memory is not formatted.
Insert a new memory card or delete pictures. 9, 42
Format the memory card or internal memory. 82
There is dirt on the memory card contacts. Clean the contacts with a soft, dry cloth.
—
9
No picture is taken
when the shutter
button is pressed.
The memory card is damaged.
Insert a new memory card.
Taking
pictures
Charge the battery or insert a fully-charged
spare battery.
The battery is exhausted.
5, 6
12
The camera has turned off automatically. Turn the camera on.
The monitor goes
dark after shoot- The flash has fired.
ing.
The monitor may darken while the flash
charges. Wait for the flash to charge.
19
The subject is close to the camera.
The subject is far away from the camera.
The subject is not suited to autofocus.
Select macro mode.
Cancel macro mode.
Use focus lock.
34
32
The camera does
not focus.
Focus
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possiblle cause
Solluution
Page
The flash is not available in the current
shooting mode.
Choose a different shooting mode.
22
Charge the battery or insert a fully-charged
spare battery.
The battery is exhausted.
5, 6
66
The flash does
not fire.
An option other than OFF is selected for
RCONTINUOUS.
Turn RCONTINUOUS off.
The camera is in silent mode.
The flash is off (P).
Turn silent mode off.
Choose a different flash mode.
18
35
Flash
The desired flash mode is not available in
the current shooting mode.
The camera is in silent mode.
Choose a different shooting mode.
22
Flash mode not
available.
Turn silent mode off.
18
The flash does
not fully light the
subject.
Face detection
not available.
The subject is not in range of the flash.
Position the subject in range of the flash.
104
The flash window is obstructed.
Hold the camera correctly.
17
22
Intelligent Face Detection is not available in
the current shooting mode.
Choose a different shooting mode.
The subject’s face is obscured by sunglass-
es, a hat, long hair, or other objects.
Remove the obstructions.
The subject’s face occupies only a small Change the composition so that the subject’s
area of the frame. face occupies a larger area of the frame.
The subject’s head is at an angle or the sub- Ask the subject to face the camera and hold
—
Intelligent
Face
Detection
No face is de-
tected.
ject is not facing the camera.
their head straight.
The camera is tilted.
The subject’s face is poorly lit.
Hold the camera straight.
Shoot in bright light.
17
—
Wrong subject
selected.
The selected subject is closer to the center Recompose the picture or turn face detection
of the frame than the main subject. off and frame the picture using focus lock.
32
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possiblle cause
Solluution
Page
Macro mode is
not available.
Macro mode is not available in the current
shooting mode.
Close-ups
Choose a different shooting mode.
22
The lens is dirty.
The lens is blocked.
Clean the lens.
Keep objects away from the lens.
88
17
Pictures are
blurred.
s is displayed during shooting and the
focus frame is displayed in red.
k is displayed during shooting.
Check focus before shooting.
Use the flash or a tripod.
96
35
Problem
images
Pictures are
mottled.
Slow shutter speed selected when ambient This is characteristic of CCD image sensors
temperature is high. and does not indicate a malfunction.
—
—
Vertical lines ap- The camera has been used continuously at Turn the camera off and wait for it to cool
pear in pictures. high temperatures.
down.
Turn the camera off before connecting the AC
power adapter/DC coupler. Leaving the cam-
era on can result in corrupted files or damage
to the memory card or internal memory.
Pictures are not
recorded.
Recording
Power was interrupted during shooting.
—
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Playback
Problem
Possiblle cause
Solluution
Page
The pictures were taken with a different make
or model of camera.
The pictures were created using ORESIZE
Pictures are grainy.
—
—
Pictures
Playback zoom
unavailable.
—
40
79
—
—
or with a different make or model of camera.
Playback volume is too low.
The microphone was obstructed.
The speaker is obstructed.
Adjust playback volume.
Hold the camera correctly during recording.
Hold the camera correctly during playback.
No sound in
movie playback.
Movies
Selected pictures Some of the pictures selected for deletion are Remove protection using the device with
Deletion
72
are not deleted. protected.
which it was originally applied.
Connections
Problem
Possiblle cause
Solluution
Page
The camera is not properly connected.
Connect the camera correctly.
47, 48
An A/V cable was connected during movie Connect the camera once movie playback
46, 47
—
playback.
has ended.
No picture or
sound.
Input on the television is set to “TV”.
Set input to “VIDEO”.
TV
The camera is not set to the correct video Match the camera QVIDEO SYSTEM set-
80
standard.
ting to the TV.
The volume on the television is too low.
Adjust the volume.
—
The camera is not set to the correct video Match the camera QVIDEO SYSTEM set-
standard. ting to the TV.
No color.
80
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Problem
Possiblle cause
Solluution
Page
The pictures were created using H or
MyFinePix Studio, were modified using
iPARALLAX CONTROL, or are cropped or
resized copies of C photos.
2D is selected for wHDMI OUTPUT in the
camera setup menu.
The pictures described at left can not be dis-
played in C. This is normal and does not 48
indicate a malfunction.
C pictures are
not displayed
in 3D
3D TV
Select another wHDMI OUTPUT option.
83
—
Television is not configured for 3D display.
Adjust TV controls.
The computer
Computer does not recog- The camera is not properly connected.
Connect the camera correctly.
57–59
nize the camera.
The camera is not properly connected.
The printer is off.
Connect the camera correctly.
Turn the printer on.
49
—
Pictures can not
be printed.
Only one copy is
printed.
The date is not
printed.
PictBridge
The printer is not PictBridge-compatible.
—
—
80
AC power Demo slides are
adapter displayed.
Press the shutter button to exit demo and
select OFF for sDEMO MODE.
ON is selected for sDEMO MODE.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Miscellaneous
Problem
Possiblle cause
Solluution
Page
Remove and reinsert the batteries or discon-
nect and reconnect the AC power adapter/DC 6–7, 8
coupler.
Temporary camera malfunction.
Nothing happens
when the shutter but-
ton is pressed.
Charge the battery or insert a fully-charged
The battery is exhausted.
5, 6
spare battery.
Remove and reinsert the battery or discon-
The camera does not
function as expected.
nect and reconnect the AC power adapter/DC
coupler. If the problem persists, contact your
FUJIFILM dealer.
Turn silent mode off.
Temporary camera malfunction.
The camera is in silent mode.
6–7, 8
No sound.
18
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Messages and Displays
The following warnings are displayed in the monitor:
Warning
Descripption
Solluution
B (red)
The battery is low.
A (blinks red) The battery is exhausted.
Charge the battery or insert a fully-charged spare bat-
tery.
k
Slow shutter speed. Picture may be blurred. Use the flash or mount the camera on a tripod.
• Use focus lock to focus on another subject at the
same distance, then recompose the picture (pg. 32).
• If the subject is poorly lit, try focusing at a distance of
about 2m (6.6ft.).
s
(displayed in red The camera can not focus.
with red focus frame)
• Use macro mode to focus when taking close-ups.
Aperture or shutter The subject is too bright or too dark. The pic-
speed shown in red ture will be over- or under-exposed.
If the subject is dark, use the flash.
G
Lens is obstructed by a finger or other object. Remove the obstruction.
FOCUS ERROR
ZOOM ERROR
LENS CONTROL ERROR
Turn the camera off and then on again, taking care not
to touch the lens. If the message persists, contact a
FUJIFILM dealer.
Camera malfunction.
No memory card inserted when ECOPY is
selected in the playback menu.
NO CARD
Insert a memory card.
The memory card or internal memory is not Format the memory card or internal memory using
formatted or the memory card was formatted the KFORMAT option in the camera setup menu
in a computer or other device.
(pg. 82).
CARD NOT INITIALIZED
Clean the contacts with a soft, dry cloth. If the mes-
The memory card contacts require cleaning. sage is repeated, format the memory card (pg. 82). If
the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
PROTECTED CARD
BUSY
The memory card is locked.
The memory card is incorrectly formatted.
Unlock the memory card (pg. 9).
Use the camera to format the memory card (pg. 82).
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Messages and Displays
Warning
Descripption
Solluution
The memory card is not formatted for use in
the camera.
Format the memory card (pg. 82).
Clean the contacts with a soft, dry cloth. If the mes-
sage is repeated, format the memory card (pg. 82). If
the message persists, replace the memory card.
The memory card contacts require cleaning or
the memory card is damaged.
CARD ERROR
Incompatible memory card.
Camera malfunction.
Use a compatible memory card.
Contact a FUJIFILM dealer.
b MEMORY FULL
a MEMORY FULL
The memory card or internal memory is full; Delete pictures or insert a memory card with more free
pictures can not be recorded or copied.
Memory card error or connection error.
space.
INTERNAL MEMORY IS FULL
INSERT A NEW CARD
Re-insert the memory card or turn the camera off
and then on again. If the message persists, contact a
FUJIFILM dealer.
WRITE ERROR
READ ERROR
Not enough memory remaining to record ad- Delete pictures or insert a memory card with more free
ditional pictures.
space.
The memory card or internal memory is not
formatted.
Format the memory card or internal memory (pg. 82).
The file is corrupt or was not created with the
camera.
The file can not be played back.
Clean the contacts with a soft, dry cloth. If the mes-
The memory card contacts require cleaning. sage is repeated, format the memory card (pg. 82). If
the message persists, replace the memory card.
Camera malfunction.
Contact a FUJIFILM dealer.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Messages and Displays
Warning
Descripption
Solluution
Format the memory card and select RENEW for the
The camera has run out of frame numbers (cur- BFRAME NO. option in the set-up menu. Take a pic-
FRAME NO. FULL
rent frame number is 999-9999).
ture to reset frame numbering to 100-0001, then return
to the BFRAME NO. menu and select CONTINUOUS.
Date for which more than 4,999 pictures exist
selected in sort-by-date view.
TOO MANY FRAMES
Choose a different date.
FCAN NOT EXECUTE
m CAN NOT EXECUTE
Red-eye removal can not be applied to the se-
lected picture or movie.
—
An attempt was made to delete or rotate a pro-
tected picture.
PROTECTED FRAME
Remove protection before deleting or rotating pictures.
Select a different source.
b NO IMAGE
a NO IMAGE
The source device selected in the playback
ECOPY menu contains no pictures.
aCAN NOT CROP
An attempt was made to crop a apicture.
These pictures can not be cropped.
The picture selected for cropping is damaged
or was not created with the camera.
CAN NOT CROP
The DPOF print order on the current memory Copy the pictures to internal memory and create a new
DPOF FILE ERROR
CAN NOT SET DPOF
card contains more than 999 images.
print order.
The picture can not be printed using DPOF.
—
—
—
—
FCAN NOT SET DPOF Movies can not be printed using DPOF.
CAN NOT ROTATE The picture can not be rotated.
FCAN NOT ROTATE Movies can not be rotated.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Messages and Displays
Warning
Descripption
Solluution
PRESS AND HOLD
An attempt was made to choose a flash mode
Exit silent mode before choosing a flash mode or ad-
justing the volume.
THE DISP BUTTON TO or adjust the volume with the camera in silent
DEACTIVATE SILENT MODE mode.
A connection error occurred while pictures
COMMUNICATION ERROR were being printed or copied to a computer or
other device.
Confirm that the device is turned on and that the USB
cable is connected.
Check printer (see printer manual for details). To resume
printing, turn the printer off and then turn it back on.
PRINTER ERROR
Printer out of paper or ink, or other printer er-
ror.
PRINTER ERROR
RESUME?
Check printer (see printer manual for details). If printing
does not resume automatically, press MENU/OK to resume.
Movies and some pictures created with other devices
An attempt was made to print a movie, a pic- can not be printed. If the picture was created with the
CAN NOT BE PRINTED ture not created with the camera, or a picture camera, check the printer manual to confirm that the
in a format not supported by the printer.
printer supports the JFIF-JPEG or Exif-JPEG format. If it
does not, the pictures can not be printed.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
3D movie format: FUJIFILM has extended the generic Motion JPEG format to create an AVI movie file format that
supports 3D. 3D movie files have the extension “*.AVI” and can be played back on the camera in 3D with stereo
sound. When viewed in Windows Media Player, only the images recorded with the left lens will be displayed.
Digital zoom: Unlike optical zoom, digital zoom does not increase the amount of visible detail. Instead, details vis-
ible using optical zoom are simply enlarged, producing a slightly “grainy” image.
DPOF (Digital Print Order Format): A standard that allows pictures to be printed from “print orders” stored
in internal memory or on a memory card. The information in the order includes the pictures to be
printed and the number of copies of each picture.
EV (Exposure Value): The exposure value is determined by the sensitivity of the image sensor and the amount
of light that enters the camera while the image sensor is exposed. Each time the amount of light doubles, EV
increases by one; each time the amount of light is halved, EV decreases by one. The amount of light entering the
camera can be controlled by adjusting aperture and shutter speed.
Exif Print: A standard that allows information stored with pictures to be used for optimal color reproduction dur-
ing printing.
JPEG (Joint Photographic Experts Group): A compressed file format for color images. The higher the compression
rate, the greater the loss of information and more noticeable drop in quality when the picture is displayed.
Motion JPEG: An AVI (Audio Video Interleave) format that stores sound and JPEG images in a single file. Motion JPEG
files can be viewed on a computer using Windows Media Player (requires DirectX 8.0 or later).
Multi-picture format: An image file format that allows multiple images to be stored in a single file. This camera
stores 3D images in multi-picture files with the extension “*.MPO”.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Parallax: Changes in the apparent position and orientation of a subject when viewed from different angles.
Smear: A phenomenon specific to CCDs which causes white streaks to appear when very bright light sources, such
as the sun or reflected sunlight, appear in the frame.
White balance: The human brain automatically adapts to changes in the color of light, with the result that objects
that appear white under one light source still appear white when the color of the light source changes. Digital
cameras can mimic this adjustment by processing images according to the color of the light source. This process
is known as “white balance.”
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Memory/Memory Card Capacity
The following table shows the file size and recording time or number of available frames at different
image sizes (the figures for capacity assume that MPO+JPEG is selected for o3DREC as described
on page 85; multiply by about 1.5 for MPO-only files and by about 3 for 2D images). All figures are ap-
proximate; file size varies with the scene recorded, producing wide variations in the number of files that
can be stored. The number of exposures or length remaining may not diminish at an even rate.
Capacity
Inteerrnnaall mmemory
(approx.. 34 MB)
FINE NORMAL
4 GB
8 GB
File size
MPO
Image/fraammee ssiizzee
O4 : 3
FINE
260
370
530
710
NORMAL
530
730
1040
1400
1630
1880
FINE
530
740
1060
1430
1680
2510
NORMAL MPO+JJPPEG
JPEG
4.9MB
3.6MB
2.5MB
1.8MB
1.6MB
1.0MB
—
—
—
—
—
2
3
4
6
1070
1470
2090
2820
3270
3770
14.7MB
10.7MB
7.5MB
5.5MB
4.7MB
3.1MB
—
9.8MB
7.1MB
5.0MB
3.7MB
3.1MB
2.1MB
—
—
—
—
—
O16 : 9
P4 : 3
P16 : 9
Q4 : 3
4
8
6
7
10
12
14
16
830
1250
Q16 : 9
j*
—
—
26sec.
—
—
46sec.
10min.
27min.
50min.
20min.
50min.
87min.
21min.
54min.
100min.
42min.
100min.
176min.
C f†
g†
j†
D f†
g†
—
—
—
—
—
—
—
* When a movie reaches a size of 4GB, recording will briefly pause and then resume in a new file. The recording times displayed
by the camera assume a maximum file size of about 4GB.
†Total length of all movie files. Individual movies can not exceed 2GB, regardless of capacity of memory card.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Model
FinePix REAL 3D W3
Effective pixels
CCD
10.17 million
Two 1 2.3 -in. CCDs
/
Storage media
File system
• Internal memory (approx. 34MB)
Compliant with Design Rule for Camera File System (DCF), Exif 2.3, multi-picture format (MPO), and
Digital Print Order Format (DPOF)
• SD/SDHC memory cards (see page 9)
File format
• Still pictures (C): MPO+JPEG or MPO
• Still pictures (D): Exif 2.3 JPEG (compressed)
• Movies (C): Stereo AVI with 2 image channels
• Movies (D): Motion JPEG with stereo audio recorded in AVI
Image size (pixels;
fi le s iz e )
• O4 : 3: 3,648×2,736 (10M)
• P4 : 3: 2,592×1,944 (5M)
• Q4 : 3: 2,048×1,536 (3M)
• O3 : 2: 3,648×2,432 (8.9M)
• P3 : 2: 2,592×1,728 (4.5M)
• Q3 : 2: 2,016×1,344 (2.7M)
• O16 : 9: 3,584×2,016 (7.2M)
• P16 : 9: 2,560×1,440 (3.7M)
• Q16 : 9: 1,920×1,080 (2M)
Lens
Focal length
Two Fujinon 3× optical zoom lenses, F/3.7 (wide angle)–4.2 (telephoto)
f=6.3mm–18.9mm (35-mm format equivalent: 35 mm–105 mm)
Zoom
• C/I: Combined optical and digital zoom up to approx. 3.8× (35-mm format equivalent: 39 mm–149 mm)
• H: 3× optical zoom
• D: 3× optical zoom with up to approx. 5.7× digital zoom (maximum combined zoom approx. 17.1 ×)
Digital zoom
Approx. 5.7× (up to 17.1 × when combined with optical zoom)
Aperture
F3.7/F5.0/F8.0 (wide angle), F4.2/F5.6/F9.0 (telephoto)
Focus range (distance
from front of lens)
Approx. 60cm (2.0ft.)–infinity
• Macro (D): Approx. 8cm–80cm/0.3ft.–2.6ft. (wide angle); 60cm–3m/2.0ft.–9.8ft. (telephoto)
• Macro (C): Approx. 38cm–70cm/1.2ft.–2.3ft. (wide angle); 1.1m–2.3m/3.6ft.–7.5ft. (telephoto)
•
Quick AF: Approx. 1m (3.3ft.)–infinity
Recommended shooting • Auto parallax off: Approx. 1.3m/4.3ft.–infinity (wide angle); 4.1m/13.5ft.–infinity (telephoto)
distance (C)
• Auto parallax on (as measured by FUJIFILM): Approx. 1.3m/4.3ft.–infinity (wide angle); 4.1m/13.5ft.–infinity (telephoto)
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Sensitivity
Metering
Exposure control
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600; AUTO (400), AUTO (800), AUTO (1600)
256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE
Program and aperture-priority autoexposure; manual exposure
/
Exposure compensation –2EV–+2EV in increments of 1 3 EV (P and A modes)
Scene modes
E(ANTI-BLUR), C(NATURAL AND FLASH LIGHTING; in C mode, images are recorded at size Q),
D(NATURAL LIGHT), L (PORTRAIT), M (LANDSCAPE), N (SPORT), O (NIGHT), H (NIGHT
TRIPOD), Q (SUNSET), R (SNOW), S (BEACH), F (UNDERWATER), U (PARTY)
V (TELE/WIDE), X (2-COLOR), W (2-SENSITIVITY)
B (INTERVAL 3D SHOOTING), A (INDIVID. SHUTTER 3D)
None
Advanced 2D modes
Advanced 3D modes
Picture stabilization
Intelligent Face Detection Available (D only)
Shutter speed
Continuous
• O: 1 8 s– 500 s • H: 3s– 500 s • M: 1 2 s– 1,000 s • Other modes: 1 4 s– 1,000 s
1
1
1
1
/
/
/
/
/
/
/
• I (C): Up to 2fps (size Q); max. 40 frames
• J (D): Up to 3fps (size Q); max. 40 frames
• Mode: Single AF
• I (D): Up to 1fps; max. 40 frames
Focus
• Autofocus system: Contrast-detect TTL AF
• Focus-area selection (Intelligent Face Detection off): Center (C/D), auto-area (D)
Auto; seven manual preset modes for direct sunlight, shade, daylight fluorescent, warm white fluores-
cent, cool white fluorescent, incandescent, and underwater lighting
Off, 2sec., 10sec.
Auto flash; effective range when sensitivity is set to ISO 800 is approx. 60cm–3.6m/2ft.–11.8ft. (wide
angle), 60cm–3.1m/2ft.–10.2ft. (telephoto), or in macro mode (D only) 30cm–80cm/1ft.–2.6ft. (wide angle),
60cm–1.5m/2ft.–4.9ft. (telephoto)
White balance
Self-timer
Flash
Flash modes
Auto, fill flash, off, slow sync (red-eye removal off); auto with red-eye removal, fill flash with red-eye removal,
off, slow sync with red-eye removal (red-eye removal on)
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Monitor
3.5-in., 1,150k-dot C/D color lenticular LCD monitor; frame coverage approx. 100%
Movies
Shooting options
j(1,280 × 720/720p, 24 fps), f(640 × 480/VGA, 30 fps), g(320 × 240/QVGA, 30 fps); stereo sound
• C: Auto parallax, power management, framing guide, and frame number memory
• D: Intelligent Face Detection with red-eye removal, power management, framing guide, and
frame number memory
Playback options
Other options
• C: Parallax adjustment, micro thumbnails, multi-frame playback, sort-by-date, cropping, resize,
and slide show
• D: Intelligent Face Detection, red-eye removal, micro thumbnails, multi-frame playback, sort-by-
date, cropping, resize, slide show, and image rotation
PictBridge, Exif Print, language selection (Arabic, Simplified Chinese, Traditional Chinese, Czech, Dan-
ish, Dutch, English, Farsi, Finnish, French, German, Greek, Hebrew, Hungarian, Indonesian, Italian, Japa-
nese, Korean, Lithuanian, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak, Spanish, Swedish,
Thai, Turkish, Ukrainian, and Vietnamese), time difference, silent mode
Input/output terminals
A/V OUT (audio/video output) 8-pin multi-connector for NTSC or PAL output with monaural sound
HDMI output
HDMI mini connector
Digital input/output
USB 2.0 High Speed (shares A/V OUT connector); PTP (Picture Transfer Protocol)/MTP (Media Transfer Protocol)
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power supply/other
Power sources
NP-50 rechargeable battery; AC-5VX AC power adapter and CP-50 DC coupler (sold separately)
Battery life (approximate
number of frames that
can be taken with fresh or
fully charged batteries)
Batttteeryy tyype
NP-50
Approximate number of frames
150
CIPA standard, measured in C B mode using battery supplied with camera and SD memory card.
Note: Number of shots that can be taken with battery varies with battery charge level and will decline
at low temperatures.
Camera dimensions
(W × H × D)
Camera weight
Shooting weight
Operating conditions
124.0mm×65.9mm×27.8 (21.0*)mm/4.9in. ×2.6in. ×1.1 (0.8)in.
* excluding projecting parts, measured at the thinnest part
Approx. 230g/8.1oz., excluding batteries, accessories, and memory cards
Approx. 250g/8.8oz., including batteries and memory card
• Temperature: 0°C to +40°C/+32°F to +104°F
• Humidity: 80% or less (no condensation)
NP-50 rechargeable battery
BC-45W battery charger
Nominal voltage
Nominal capacity
Operating temperature 0°C–+40°C/+32°F–+104°F
Dimensions (W × H × D) 35.4mm×40.0mm×6.6mm/
1.4in. ×1.6in. ×0.3in.
DC 3.6V
1000mAh
Rated input
Input capacity
Rated output
Supported batteries
Charging time
100V–240V AC, 50/60Hz
8.0VA (100V)/12VA (240V)
4.2V DC, 550mA
NP-50 rechargeable batteries
Approx. 150 minutes (at 20°C/68°F)
Weight
Approx. 18g/0.6oz.
Dimensions (W × H × D) 91 mm × 62 mm × 23 mm/
3.6in. ×2.4in. ×0.9in.,
excluding projections
Weight
Approx. 67g/2.4oz., excluding battery
Operating temperature 0°C–+40°C/+32°F–+104°F
Note: Weight and dimensions vary with the country or region
of sale.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Notices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for damages resulting from
errors in this manual.
• Although the monitor is manufactured using advanced high-precision technology, small bright points and
anomalous colors may appear, particularly in the vicinity of text. This is normal for this type of monitor and does
not indicate a malfunction; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static electric-
ity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com
Download from Www.Somanuals.com. All Manuals Search And Download.
|