Extron electronic Stereo Receiver FOX 500 DVI Rx User Manual

Specifications — FOX 500 DVI Series  
The FOX 500 DVI consists of a transmitter (FOX 500 DVI Tx) and a receiver (FOX 500 DVI Rx)  
with one or two fiber optic cables linking the two units. They are available in singlemode or  
multimode versions.  
N
The analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and  
converted back to analog audio in the receiver.  
These transceivers are class 1 laser products. They meet the safety regulations of IEC-60825,  
FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.  
N
N
Optical fiber interconnection between transmitter and receiver  
Number/type �������������������������������� 1 or 2 fiber optic  
Only one fiber is required to transmit video, audio, and unidirectional data. A second fiber is  
required to transmit return data for bidirectional control/communication.  
N
Connectors ������������������������������������� 2 LC connectors  
Operating distance  
Singlemode������������������������� 30 km (18�75 miles) with singlemode (SM) cables with a FOX 500 DVI SM  
Multimode�������������������������� 300 m (985') with 62�5 µm multimode (MM) cables with a FOX 500 DVI MM  
1 km (3280') with 50 µm multimode (MM) cables with a FOX 500 DVI MM  
2 km (6561') with 50 µm 2000 MHz bandwidth laser optimized multimode  
cable with a FOX 500 DVI MM  
Operating distance is approximate. These are typical maximum distances that may vary depending  
on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic  
dispersion, environmental factors, and kinks.  
N
Nominal peak wavelength����������� 850 nm for FOX 500 DVI MM, 1310 nm for FOX 500 DVI SM  
Data rate ����������������������������������������� 4�25 Gbps  
Transmission power  
Singlemode������������������������� -5 dBm, typical  
Multimode�������������������������� -5 dBm, typical  
Maximum receiver sensitivity  
Singlemode������������������������� -18 dBm, typical  
Multimode�������������������������� -12 dBm, typical  
Optical loss budget  
Singlemode������������������������� 13 dB, maximum  
Multimode�������������������������� 7 dB, maximum  
Video  
Resolution range ��������������������������� Single link DVI and HDMI digital video signals are supported, including  
640x480 @ 60 Hz through 1600x1200 @ 60 Hz, and also HDTV signals at  
480p, 720p, 1080i, and 1080p�  
Higher resolutions up to 1920x1200 @ 60 Hz, undersampled  
*Appropriate DVI-D to HDMI cables or adapters are required for HDMI signal input/output.  
The FOX 500 DVI Series can be used to distribute HDMI signals if you use a DVI-to-HDMI  
adapter. However, when using HDMI signals, the FOX units do not transmit audio and CEC  
signals.  
N
N
Formats������������������������������������������ RGB and YCbCr digital video  
Standards���������������������������������������� DVI 1�0, HDMI 1�2  
Video input and loop-through — transmitter (FOX 500 DVI Tx)  
Number/signal type��������������������� 1 DVI-D (or HDMI*) input  
1 DVI-D (or HDMI*) loop-through  
Connectors ������������������������������������� 1 female DVI-I for input  
1 female DVI-I for loop-through  
Nominal level �������������������������������� 0�8 Vp-p  
Impedance�������������������������������������� 100 ohms  
Extron FOX 500 DVI Tx, FOX 500 DVI Rx Fiber Optic Transmitter-Receiver Pair • Specifications  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Serial control pin configurations� Captive screw connectors: 1 = Tx, 2 = Rx, 3 = GND  
Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND  
Program control����������������������������� Extron’s control/configuration program for Windows®  
Extron’s Simple Instruction Set (SIS)  
General  
Power��������������������������������������������� 100 VAC to 240 VAC, 50-60 Hz, 11 watts, internal  
Temperature/humidity��������������� Storage: -40 to +158 °F (-40 to +70 °C) / 10% to 90%, noncondensing  
Operating: +32 to +122 °F (0 to +50 °C) / 10% to 90%, noncondensing  
Cooling ������������������������������������������� Convection, vented left to right, vents on side panels  
Mounting  
Rack mount����������������������� Yes, with optional rack shelf kit  
Furniture mounting holes Yes, with optional under desk mounting kit  
Enclosure type ������������������������������� Metal  
Enclosure dimensions������������������� 1�7" H x 8�7" W x 9�5" D (1U high, half rack wide)  
(4�3 cm H x 22�1 cm W x 24�1 cm D)  
(Depth excludes connectors and knobs�)  
Product weight ������������������������������ 2�3 lbs (1�0 kg) per unit  
Shipping weight ���������������������������� 4 lbs (2 kg) per unit  
Vibration���������������������������������������� ISTA 1A in carton (International Safe Transit Association)  
Regulatory compliance  
Safety����������������������������������� CE, CUL, FDA Class 1, UL  
EMI/EMC �������������������������� CE, C-tick, FCC Class A, ICES, VCCI  
MTBF����������������������������������������������� 30,000 hours  
Warranty����������������������������������������� 3 years parts and labor  
All nominal levels are at 10%.  
Specifications are subject to change without notice.  
N
N
7.6-031709-D6  
Extron FOX 500 DVI Tx, FOX 500 DVI Rx Fiber Optic Transmitter-Receiver Pair • Specifications  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eiki Projector EIP X350 User Manual
ELAN Home Systems VCR V883 User Manual
Elation Professional Work Light 15R User Manual
Exide Battery Charger S47 0079 User Manual
Fellowes Laminator Cosmic2 125 User Manual
Frigidaire Dehumidifier 66166042 User Manual
Fujitsu Laptop T1010 User Manual
Garland Cooktop GI SH GR IN 3500 User Manual
GE Answering Machine 2 9876 User Manual
Genelec Portable Speaker 8040A User Manual