Eizo Computer Monitor L352T C User Manual

Users Manual  
Touch Panel Color LCD Monitor  
It shall be assured that the final system is in compliance  
to IEC60601-1-1 requirements.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
TABLE OF CONTENTS  
PRECAUTIONS ...................................................................................4  
1. INTRODUCTION .....................................................................................9  
1-1. Features ........................................................................................................9  
1-2. Package Contents..........................................................................................9  
1-3. Controls & Connectors ..............................................................................10  
2. CABLE CONNECTION .........................................................................12  
2-1. Before connecting .......................................................................................12  
2-2. Connecting the signal cable ........................................................................13  
2-3. Connecting two PCs to the monitor............................................................15  
2-4. Sound Connections.....................................................................................15  
3. ScreenManager....................................................................................16  
3-1. How to use the ScreenManager ..................................................................16  
3-2. Adjustments and Settings............................................................................17  
3-3. Useful Functions .........................................................................................18  
4. ADJUSTMENT ......................................................................................20  
4-1. Screen Adjustment ......................................................................................20  
4-2. Color Adjustment .......................................................................................24  
4-3. Power-save Setup ........................................................................................26  
5. ATTACHING A STAND..........................................................................28  
6.TROUBLESHOOTING...........................................................................29  
7. CLEANING............................................................................................33  
8. SPECIFICATIONS.................................................................................34  
9. GLOSSARY...........................................................................................37  
APPENDIX ...................................................................................................i  
TABLE OF CONTENTS  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
PRECAUTIONS  
IMPORTANT!  
This product has been adjusted specifically for use in the region to which it was  
originally shipped. If operated outside the region to which it was originally shipped,  
the product may not perform as stated in the specifications.  
To ensure personal safety and proper maintenance, please read this section and the  
caution statements on the unit (refer to the figure below).  
[Location of the Caution Statements]  
[Symbols on the unit]  
Symbol  
Location  
This symbol indicates  
Front  
Power button  
Control panel  
Press to turn the monitor’s power on or off.  
Rear  
Alternating current  
Name Plate  
Rear  
Alerting electrical hazard  
Caution  
Name Plate  
Rear  
Name Plate  
Refer to SAFETY SYMBOLS section in this  
manual.  
4
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
If the unit begins to emit smoke, smells like something is burning, or  
makes strange noises, disconnect all power connections immediately  
and contact your dealer for advice.  
Attempting to use a malfunctioning unit can be dangerous.  
Do not dismantle the cabinet or modify the unit.  
Dismantling the cabinet or modifying the unit may result in electric shock or  
burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing covers  
may expose you to dangerous voltage or other hazards.  
Keep small objects or liquids away from the unit.  
Small objects accidentally falling through the ventilation slots into the cabinet  
or spillage into the cabinet may result in fire, electric shock, or equipment  
damage.  
If an object or liquid falls/spills into the cabinet, unplug the unit immediately.  
Have the unit checked by a qualified service engineer before using it again.  
Place the unit on a strong, stable surface.  
A unit placed on an inadequate surface may fall, resulting in injury or  
equipment damage.  
S
I
G
.
A
U
T
O
E
N
T
.
When the unit is dropped, please ask your dealer for advice. Do not continue  
using a damaged unit. Using a damaged unit may result in fire or electric  
shock.  
OK  
Set the unit in an appropriate location.  
Not doing so may cause damage and could result in fire or electric shock.  
*
*
Do not place outdoors.  
Do not place in the transportation system (ship, aircraft, trains, automobiles,  
etc.)  
*
*
*
*
Do not place in a dusty or humid environment.  
Do not place in a location where the steam comes directly on the screen.  
Do not place near heat generating devices or a humidifier.  
Do not place in an inflammable gas environment.  
PRECAUTIONS  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
To avoid danger of suffocation, keep the plastic packing bags away  
from babies and children.  
Use the enclosed power cord and connect to the standard power outlet  
of your country. Be sure to remain within the rated voltage of the  
power cord.  
Not doing so may cause in fire or electric shock.  
To disconnect the power cord, grasp the plug firmly and pull.  
Never tug on the cord, doing so may cause damage and could result in fire or  
electric shock.  
OK  
The equipment must be connected to a grounded main outlet.  
Not doing so may cause in fire or electric shock.  
Use the correct voltage.  
*
Do not overload your power circuit, as this may result in fire or electric  
shock.  
*
The unit is designed for use with a specific voltage only. Connection to  
another voltage than specified in this User’s Manual may cause fire, electric  
shock, or other damage.  
*
Do not overload your power circuit, as this may result in fire or electric  
shock.  
Handle the power cord with care.  
*
*
Do not place the cord underneath the unit or other heavy objects.  
Do not pull on or tie the cord.  
If the power cord becomes damaged, stop using it. Use of a damaged cord  
may result in fire or electric shock.  
Never touch the plug and power cord if it begins to thunder.  
Touching them may result in electric shock.  
6
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
WARNING  
When attaching an arm stand, please refer to the user’s manual of the  
arm stand and install the unit securely with the enclosed screws.  
Not doing so may cause the unit to come unattached, which may result in  
injury or equipment damage. When the unit is dropped, please ask your dealer  
for advice. Do not continue using a damaged unit. Using a damaged unit may  
result in fire or electric shock. When reattaching the tilt stand, please use the  
same screws and tighten them securely.  
Do not touch a damaged LCD panel directly with bare hands.  
The liquid crystal which leaks from the panel is poisonous if it enters the eyes  
or mouth.  
If any part of the skin or body comes in direct contact with the panel, please  
wash thoroughly. If some physical symptoms result, please consult your  
doctor.  
CAUTION  
Handle with care when carrying the unit.  
Disconnect the power cord and cables when moving the unit. Moving the unit  
with the cord attached is dangerous. It may result in injury or equipment  
damage.  
When handling the unit, grip the bottom of the unit firmly with both  
hands ensuring the panel faces outward before lifting.  
Dropping the unit may result in injury or equipment damage.  
S
I
G
.
A
U
T
O
E
N
T
.
OK  
Do not block the ventilation slots on the cabinet.  
*
*
*
Do not place books or any other papers on the ventilation slots.  
Do not install the unit in a closed space.  
Do not use the unit lying down or upside down.  
Using the unit in these ways blocks the ventilation slots and prevents proper  
airflow, leading to fire or other damage.  
Do not touch the plug with wet hands.  
Touching them may result in electric shock.  
PRECAUTIONS  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
CAUTION  
Use an easily accessible power outlet.  
This will ensure that you can disconnect the power quickly in case of a  
problem.  
Periodically clean the area around the plug.  
Buildup of dust, water, or oil on the plug may result in fire.  
Unplug the unit before cleaning it.  
Cleaning the unit while it is plugged into a power outlet may result in electric  
shock.  
If you plan to leave the unit unused for an extended period, disconnect  
the power cord from the wall socket after turning off the power switch  
for the safety and the power conservation.  
LCD Panel  
In order to suppress the luminosity change by long-term use and to maintain  
the stable luminosity, use of a monitor in lower brightness is recommended.  
The screen may have defective pixels. These pixels may appear as slightly light  
or dark area on the screen. This is due to the characteristics of the panel itself,  
and not the product.  
The backlight of the LCD panel has a fixed life span. When the screen becomes  
dark or begins to flicker, please contact your dealer.  
Do not scratch or press on the panel with any sharp objects, such as a pencil or  
pen as this may result in damage to the panel. Do not attempt to brush with  
tissues as this may scratch the panel.  
When the monitor is cold and brought into a room or the room temperature  
goes up quickly, dew condensation may occur inside and outside the monitor.  
In that case, do not turn the monitor on and wait until dew condensation  
disappears, otherwise it may cause some damages to it.  
8
PRECAUTIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
1. INTRODUCTION  
Thank you very much for choosing an EIZO Color Monitor.  
1-1. Features  
Dual inputs compliant  
DVI (p.37) Digital input (TMDS (p.38)) compliant.  
Horizontal scanning frequency:  
Analog input 24 - 61 kHz  
Digital input 31 - 49 kHz  
Analog input 55 - 75 Hz  
Vertical scanning frequency:  
Digital input 59 - 61 Hz (VGA text: 70 Hz)  
0.8 M pixels (1024 dots x 768 lines)  
Resolution:  
Auto Adjustment compliant  
Support to sRGB (p.38) standard  
Built-in speaker system  
Touch Panel provided  
Touch Panel Pointer “TP1” is available (optional, p.14)  
1-2. Package Contents  
Please contact your local dealer for assistance if any of the listed items are missing or  
damaged.  
LCD Monitor  
Power Cord  
Signal Cable (MD-C87)  
Touch Panel Cable (FD-C38)  
Stereo mini-jack Cable  
User’s Manual  
ScreenManager Quick Reference  
LIMITED WARRANTY  
Mounting Screws: M4 x 12 (mm) x 4 pcs  
CD-ROM for Touch Panel (Contents: Touch Panel Driver, User’s Manual)  
NOTE  
Please retain the packing materials for future transference.  
Regarding the installing the touch panel driver, please follow the instructions in the  
CD-ROM.  
1. INTRODUCTION  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
1-3. Controls & Connectors  
Front  
(1)  
(2)  
S
I
G
.
A
UTO  
E
N T .  
Control Panel  
AUTO  
ENT.  
SIG.  
(3) (4) (5)  
(6)  
(7) (8)  
(1) ScreenManager®  
(2) Speaker*1  
Volume Control  
Mute  
Press the Right and Left Buttons.  
Press the Up or Down Button for a while after  
pressing the Right or Left Button to display the  
volume control bar.  
Press the Right or Left Button to mute off.  
(3) Input Signal Selection Button  
(4) Auto Adjustment Button  
(5) Enter Button  
(6) Control Buttons (Left, Down, Up, Right)  
(7) Power Switch  
(8) Power Indicator*2  
Blue  
Operation  
Yellow  
Power saving  
Flashing yellow (2  
times for each)  
Power save mode Digital only  
Flashing yellow  
slowly  
Power off  
*1 Regarding the sound connection, see page 15.  
*2 Regarding the power indicator for the off timer, see page 18.  
10 1. INTRODUCTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Rear  
(15)  
POWER INPUT  
DVI  
D-SUB  
(14)  
(16)  
Bottom  
(9)  
(10)  
(12)  
(13)  
(11)  
(9) Power Connector  
(10) RS-232C port (Mini DIN 6 pin)  
(11) External line in (stereo mini-jack)  
(12) DVI-D Connector (SIGNAL 1)  
(13) D-Sub mini 15 pin Connector (SIGNAL 2)  
(14) Security Lock Slot*3  
(15) 4 Holes for Mounting a stand*4  
(16) Stand (Detachable)*4  
*3  
Allows for connection of a security cable. This lock supports Kensington’s  
MicroSaver security system.  
For further inforamation, please consult:  
Kensington Technology Group  
2855 Campus Drive, San Mateo, CA 94403 USA  
Tel: 800-650-4242, x3348  
Intl: 650-572-2700, x3348 / Fax: 650-572-9675  
*4  
The LCD monitor can be used with an other stand by removing the stand (see page  
28).  
1. INTRODUCTION 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-1. Before connecting  
Before connecting your monitor to the PC, change the display screen settings (resolution  
(p.37) and frequency) in accordance with the charts below.  
NOTE  
The lower display modes like 640x 480, automatically enlarge to the maximum  
display mode (1024 x 768), and some lines of the characters may become fuzzy. In  
this case, use <Smoothing> function (p.22) to make the lines clear.  
When your computer and display support VESA DDC, the suitable resolution and  
the refresh rate are set by just plugging your display into the computer without any  
manual settings.  
Analog Input  
Resolution  
Frequency  
Dot Clock  
Remarks  
320 x 200  
640 x 480  
720 x 400  
800 x 600  
1024 x 768  
70 Hz  
~75 Hz  
70 Hz  
~75 Hz  
~75 Hz  
79 MHz  
(Max)  
VGA Mode13  
VGA, VESA  
VGA TEXT  
VESA  
VESA  
Digital Input  
Resolution  
Frequency  
Dot Clock  
Remarks  
640 x 480  
720 x 400  
800 x 600  
1024 x 768  
60 Hz  
70 Hz  
60 Hz  
60 Hz  
66 MHz  
(Max)  
VGA  
VGA TEXT  
VESA  
VESA  
12 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-2. Connecting the signal cable  
NOTE  
Be sure that the power switches of both the PC and the monitor are OFF.  
1. Plug the signal cable into the connector at the rear of the monitor  
and the other end of the cable into the video connector on the PC.  
After connecting, secure the connection with the screw-in fasteners.  
Digital Signal  
Input Connecter  
Analog Signal  
Input Connecter  
3.  
Power Cord  
2.  
Touch Panel Cable  
Connector of PC  
1.  
Signal Cable  
Analog Input  
Signal Cable  
PC  
Signal Cable (enclosed, MD- Video Output  
Standard graphics card  
C87)  
Connector/ D-Sub  
mini 15 pin  
Input Connecor  
(monitor)/ D-Sub  
mini 15 pin  
Digital Input  
Signal Cable  
Connector of PC  
PC  
FD-C39 (Optional)  
Video Output  
Connector DVI-I  
Digital Graphics card  
Input Connecor  
(monitor)/ DVI  
2. CABLE CONNECTION 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2. Plug the enclosed touch panel cable into the RS-232C port of the  
monitor. Then, plug the other end of the cable into the COM port of  
the computer.  
3. Plug the power cord into the power connector on the rear of the  
monitor. Then, plug the other end of the cord into a power outlet.  
WARNING  
Use the enclosed power cord and connect to the standard  
power outlet of your country.  
Be sure to remain within the rated voltage of the power cord.  
Not doing so may cause in fire or electric shock.  
The equipment must be connected to a grounded main  
outlet.  
Not doing so may cause in fire or electric shock.  
4. Turn on the monitor’s main power and then switch on the PC's  
power.  
The monitor’s power indicator will light up (blue).  
If an image does not appear, refer to the “6. TROUBLESHOOTING” (p.29) for  
advice.  
Whenever finished, turn off the PC and the monitor.  
NOTE  
Adjust brightness of the screen depending on the brightness of your environment.  
Too dark or too bright of a screen can cause eyestrain.  
Be sure to take adequate rests. A 10-minute rest period each hour is suggested.  
For the users with gloves, we recommend to use touch panel pointer, “TP1”  
(optional). Regarding the installation, please refer to the User’s Manual of TP1.  
14 2. CABLE CONNECTION  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
2-3. Connecting two PCs to the monitor  
Two PCs can be connected to the monitor through the DVI and the D-Sub mini 15 pin  
connector on the back of the monitor.  
Selecting the active input  
The Input Signal Selection Button on the control panel can be used to select either Signal  
1 or Signal 2 as the active input at any time. Every time the button is pressed, the input  
changes. When switching the signal, the kind of the input signal (Signal1 or 2/Analog or  
Digital) is displayed for a few seconds on the right top corner of the screen.  
Input Signal Selection Button  
AUTO  
ENT.  
SIG.  
2-4. Sound Connections  
NOTE  
Always switch the monitor and audio devices or computers off whenever connecting  
or disconnecting any audio devices (computer or CD player) to the monitor.  
Use the enclosed stereo mini-jack cable for connecting audio devices or computers  
to the monitor.  
1. Connect the stereo mini-jack cable to the external line in of the  
monitor.  
2. Connect the other side of stereo mini-jack cable to the line out of  
audio devices.  
P
O
W
E
R
I
N
P
U
T
DVI  
D-SUB  
Computer or  
CD Player  
Volume control  
Volume control  
Mute  
Press the Right and Left Buttons.  
Press the Up or Down Button for a while after pressing the Right or Left  
Button to display the volume control bar.  
Mute off  
Press the Right or Left Button.  
NOTE  
<Sound> menu of the ScreenManager also controls the sound.  
2. CABLE CONNECTION 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
3. ScreenManager  
3-1. How to use the ScreenManager  
ScreenManager  
Main Menu  
Control Buttons  
Left, Down, Up, Right  
S
I
G
.
A
UTO  
E
N T .  
AUTO  
ENT.  
SIG.  
Auto Adjustment Button  
Enter Button  
1. Entering the ScreenManager  
Press the Enter Button once to display the main menu of the ScreenManager.  
2. Making Adjustments and Settings  
(1) Select the desired sub menu icon using the Control Buttons and press the Enter  
Button. The sub menu appears.  
(2) Use the Control Buttons to select the desired setting icon and press the Enter  
Button. The setting menu appears.  
(3) Use the Control Buttons to make all required adjustments and press the Enter  
Button to save the settings.  
3. Exiting the ScreenManager  
(1) To return to the main menu, select the <Return> icon or press the Down  
Button twice, followed by the Enter Button.  
(2) To exit the ScreenManager, select <Exit> icon or press the Down Button twice,  
followed by the Enter Button.  
NOTE  
Double clicking the Enter Button at any time also exits the ScreenManager menu.  
16 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3-2. Adjustments and Settings  
The following table shows all the ScreenManager’s adjustment and setting menus.  
“*” indicates adjustments of analog input only and “**” indicates digital input only.  
Main menu  
Sub menu  
Reference  
Screen  
Clock  
*
*
*
*
4-1. Screen Adjustment (p.20)  
Phase  
Position  
Range Adjustment  
Smoothing  
Brightness  
Color Mode  
Custom  
Temperature  
Gamma  
Color  
4-2. Color Adjustment (p.24)  
Saturation  
Hue  
Gain  
Reset  
sRGB  
Sound  
Volume  
Control the sound volume.  
Mute the sound.  
Mute  
PowerManager  
DVI DMPM  
VESA DPMS  
Sound  
** 4-3. Power-save Setup (p.26)  
*
Others  
Input Signal  
Set the input signal selection of  
automatic or manual (p.19)  
Off Timer  
Set the power save (p.18)  
VGA Selection  
Menu Position  
Translucent  
Menu Off Timer  
Reset  
Select the display mode. (p.30)  
Adjust the menu position.  
Set the transparency of the menu.  
Set the menu displaying time.  
Return to the factory default settings.  
(p.35)  
Information  
Language  
Information  
Review the ScreenManager’s settings,  
model name, serial number and usage  
time*1.  
English, German,  
French, Spanish,  
Italian and Swedish  
Select the ScreenManager’s language.  
*1 Due to the inspection on the factory, the usage time may not “0 hour” at shipping.  
3. ScreenManager 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
3-3. Useful Functions  
Adjustment Lock  
Use the “Adjustment Lock” function to prevent any accidental changes.  
Locked function  
Auto Adjustment Button adjustments and settings in the  
ScreenManager.  
Unlocked function  
Adjustment of brightness by the Control Buttons.  
Sound control by the Control Buttons.  
Input Signal Selection Button  
[To lock]  
(1) Switch off the monitor’s power by the power switch on the control panel.  
(2) Press on the Auto adjustment button while switching on the monitor’s power.  
[To unlock]  
(1) Switch off the monitor’s power by the power switch on the control panel.  
(2) Hold down the Auto adjustment button once again and turn the power back on.  
Off Timer  
The off timer function causes the monitor to automatically enter a power off state after  
a predetermined amount of time has lapsed. This function was created to reduce  
afterimage characteristics that are particular to LCD monitors when the monitor screen  
is left on for a long period without use.  
[Procedure]  
(1) Select <Off Timer> in the ScreenManager <Others> menu.  
(2) Select “Enable” and press the Right and Left Buttons to adjust the “On Period” (1  
to 23 hours).  
[Off timer system]  
PC  
Monitor  
Power Indicator  
On Period (1H - 23H)  
Last 15 min. in “On period”  
“On period” expired  
Operation  
Blue  
Advance Notice *1  
Blue Flashing  
Power off  
Flashing yellow slowly  
*1  
Advance notice (Power Indicator flashing blue) will be given 15 minutes before the monitor  
automatically enters the “Power Off” mode. To delay entering the “Power Off” mode, press  
the power switch during the advance notice period. The monitor will continue to operate for  
an additional 90 minutes.  
[Power Resumption Procedure]  
Press the power switch.  
NOTE  
The off timer function works while the PowerManager is active, but there is no  
advance notice before the monitor’s power is switched off.  
18 3. ScreenManager  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
English  
EIZO Logo disappearing function  
When switching on the Power Switch on the control panel, the EIZO logo is displyed  
for a while. If you desire to display or undisplay this logo, use this function. (Default is  
logo appearing.)  
[To undisplay]  
(1) Switch off the monitor’s power by the Power switch on the control panel.  
(2) Hold down the Enter button once again and turn the power back on.  
[To display again]  
(1) Switch off the monitor’s power by the Power switch.  
(2) Hold down the Enter button once again and turn the power back on.  
Automatically selecting the input signal function  
The monitor will automatically detect the inputted signal of either the connection for  
display.  
Connecting two PCs to the monitor  
When the one computer is switched off or entering the power saving mode, the monitor  
will automatically dislay the other signal.  
Use the ScreenManager to switch the input selection to manual.  
[Procedure]  
(1) Select <Input Signal> in the <Others> menu.  
(2) Select “Manual”.  
3. ScreenManager 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
4. ADJUSTMENT  
The monitor displays the digital input image correctly based on its pre-setting  
data. Adjust the brightness (p.23).  
4-1. Screen Adjustment  
Screen adjustments for the LCD monitor should be used in suppressing screen flickering  
and also for adjusting the screen to its proper position. There is only one correct  
position for each display mode. It is also recommended to use the ScreenManager  
function when first installing the display or whenever changing the system.  
Adjustment Procedure  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments.  
1. Press the Auto Adjustment Button on the control panel.  
The message “Your setting will be lost, if you press again now.” appears and  
remains on the screen for 5 seconds. While the message is on the screen, press the  
Auto Adjustment Button again to automatically adjust the clock, phase, and screen  
position. If you do not wish to do adjust the screen, do not press the Auto  
Adjustment Button again.  
NOTE  
The Auto Adjustment function is intended for use on AT-compatible PC running  
Windows. It may not work properly in either of the following cases.  
When running an AT-compatible PC on MS-DOS (Not windows). The  
background color for the “wall paper” or “desktop” pattern is set to black.  
If the appropriate screen can not be made by using the Auto Adjustment  
Button, adjust the screen through the following procedures. If the  
appropriate screen can be made, proceed to step 4.  
20 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
2. We recommend setting the desktop pattern to that as shown in the  
diagram below.  
NOTE  
More precise adjustment is available for using the “Screen Adjustment  
program” utility software. It can be downloaded from the EIZO homepage  
(http://www.eizo.com/).  
3. Adjust by using <Screen> menu in the ScreenManager.  
(1) Vertical bars appear on the screen  
Use the <Clock> (p.37) adjustment.  
Select the <Clock> and eliminate the vertical bars by using the Right and Left  
of the Control Buttons.  
Do not continuously press the Control Buttons, as the adjustment value will  
change quickly and make it difficult to locate the most suitable adjustment  
point. If the horizontal flickering, blur or bars appear, proceed to <Phase>  
adjustment as follows.  
(2) Horizontal bars appear on the screen.  
Use the <Phase> (p.37)adjustment.  
Select the <Phase> and eliminate the horizontal flickering, blurring or bars by  
using the Right and Left Buttons.  
NOTE  
Horizontal bars may not completely disappear from the screen depending on  
the PC.  
4. ADJUSTMENT 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
English  
(3) The screen position is incorrect.  
Use the <Position> adjustment.  
The correct displayed position of the monitor is decided because the number  
and the position of the pixels are fixed. The “Position” adjustment moves the  
image to the correct position.  
Select <Position> and adjust the position by using the Up, Down, Right and  
Left Buttons.  
If vertical bars of distortion appear after finishing the <Position> adjustment,  
return to <Clock> adjustment and repeat the previously explained adjustment  
procedure. ClockPhasePosition  
4. To adjust the output signal range (Dynamic Range) of the signal.  
Use the <Range Adjustment> (p.38) of <Screen> menu.  
This controls the level of output signal range to display the whole color gradation  
(256 colors).  
[Procedure]  
Press the Auto Adjustment Button on the control panel while displaying the  
<Range Adjustment> menu to automatically adjust the range. The screen blanks  
for a moment, and adjusts the color range to display the whole color gradation of  
the current output signal.  
5. To smooth the blurred texts of the enlarged screen of the lower  
resolutions.  
Switch the <Smoothing> setting.  
<Smoothing> is clear-cut the letters or lines.  
Select <Smoothing> in the screen menu and select the suitable level from 1 ~ 5.  
NOTE  
The “Smoothing” is disabled in the resolution 1024 x 768.  
Since the displayed image is enlarged, the blurred texts may not be  
necessarily lost completely.  
22 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
English  
6. To Set the Brightness of the screen.  
Use the <Brightness> adjustment.  
The brightness of the entire screen is controlled by changing the brightness of the  
backlight.  
Select < Brightness > in the screen menu and adjust by using the Up and Down  
Buttons.  
NOTE  
Directly pressing the Up and Down Buttons also adjusts the brightness. Press  
the Enter Button to save and exit the settings after the adjustment.  
4. ADJUSTMENT 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
4-2. Color Adjustment  
The <Color> menu in the ScreenManager enables to change the color of the screen. By  
using the <Color Mode>, the adjustment mode can be selected from <Custom mode> (to  
adjust the color settings according to your preference) and <sRGB> mode.  
In the analog input, perform the “Range Adjustment” (p.22) before making the  
color adjustments.  
NOTE  
Allow the LCD monitor to stabilize for at least 20 minutes before making image  
adjustments. (Allow the monitor to warm up for at least 20 minutes before making  
adjustments.)  
Performing the <Reset> of the <Color> menu returns the color settings to the  
default settings  
The values shown in percentages represent the current level within the specific  
adjustment. They are available only as a reference tool. (To create an uniform white  
or black screen, the percentages for each will probably not be the same.)  
Adjustment Contents  
Menu  
Color Mode  
Custom sRGB  
Function Descriptions  
Adjustable range  
0 100%  
Brightness  
To set the brightness of the  
screen  
Temperature  
(p.37)  
-
To set the color temperature  
4,000 10,000 K  
in 500 K increments  
(including 9,300 K).  
Default setting is off  
(normal white)  
NOTE  
The values shown in the Kelvin are available only as a  
reference tool.  
Setting the temperature under 4,000 K or over 10,000  
K invalidates the color temperature setting. (The color  
temperature’s setting turns “OFF”.)  
Gamma  
(p.37)  
-
To set the gamma value  
1.8 2.6  
NOTE  
If setting the gamma value, the using the monitor in  
the digital signal input is recommended.  
If using the monitor in the analog input signal, set the  
gamma value from 1.8 to 2.2.  
24 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
Menu  
Color Mode  
Custom sRGB  
Function Descriptions  
Adjustable range  
-128 127  
Saturation  
-
To change the saturation  
Setting the minimum  
level (-128) turns the  
image to the  
monochrome.  
NOTE  
The <Saturation> adjustment may cause  
undisplayable color tone.  
Hue  
-
-
To change the flesh color,  
etc.  
-32 32  
NOTE  
The <Hue> adjustment may cause undisplayable color  
tone.  
Gain (p.37)  
To change each color (red,  
green and blue)  
0 100%  
By adjusting the red,  
green and blue color  
tones for each mode,  
custom colors can be  
defined. Display a  
white or gray  
background image and  
adjust the <Gain>.  
NOTE  
The values shown in the percentage are available only  
as a reference tool.  
Setting the <Temperature> (p.37) invalidates the  
<Gain> adjustment. <Gain> setting returns to the  
default.  
Reset  
-
To return the color settings  
to the default settings  
Select the “Reset”.  
4. ADJUSTMENT 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
4-3. Power-save Setup  
The <PowerManager> menu in the ScreenManager enables to set the power-save setup.  
NOTE  
Do your part to conserve energy, turn off the monitor when you are finished using it.  
Disconnecting the monitor from the power supply is recommended to save energy  
completely.  
Analog Input  
This monitor complies with the VESA DPMS (p.38).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “VESA DPMS” from the <PowerManager> menu.  
[Power saving system]  
PC  
Monitor  
Power Indicator  
Operation  
Operation  
Blue  
STAND-BY  
SUSPEND  
OFF  
Power saving  
Power saving  
Yellow  
[Power Resumption Procedure]  
Operate the mouse or keyboard to return to a normal screen.  
Digital Input  
This monitor complies with the DVI DMPM (p.37).  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select “DVI DMPM” from the < PowerManager > menu.  
[Power saving system]  
PC  
Monitor  
Power Indicator  
Operation  
Operation  
Blue  
Power saving  
Power saving  
Yellow  
Flashing yellow  
(2 times for each)  
Off mode  
Power saving*1  
*1  
Power saving through the PC’s off mode is only supported when “Manual” is selected on  
the ScreenManager’s <Input Signal>.  
[Power Resumption Procedure]  
Operate the mouse or keyboard to return to a normal screen from the Power save mode  
of the PC.  
Power on the PC to return a normal screen from the Off mode of the PC.  
26 4. ADJUSTMENT  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
English  
Power save for speaker  
When the monitor is in the power-saving mode, sound of speaker also erases  
simultaneously can be performed.  
[Procedure]  
(1) Set the PC’s power saving settings.  
(2) Select <Sound>.  
(3) Select “Disable”. (“Enable” is selected to leave sound.)  
4. ADJUSTMENT 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
5. ATTACHING A STAND  
The LCD monitor can be used with other stand by removing the tilt stand and attaching  
the stand to the LCD monitor.  
NOTE  
If you will use the other stand, confirm the followings to the manufacturers before  
selecting.  
- Hole spacing on the stand mounting: 75 mm x 75 mm (VESA compliant)  
- Supportable Weight: Total weight of the monitor (without stand) and attaching  
equipment such as a cable  
- TÜV/GS approved stand  
Please connect cables after attaching a stand.  
Setup Procedure  
1. Lay the LCD monitor down. Do not scratch the panel.  
2. Remove the tilt stand by loosening the screws (2 pcs of M4 x 10  
mm).  
3. Attach a stand to the LCD monitor securely.  
stand  
4 Mounting Screws (enclosed): M4 x 12 mm  
28 5. ATTACHING A STAND  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
6.TROUBLESHOOTING  
If a problem persists even after applying the suggested remedies, contact an EIZO dealer.  
No picture problems : See No.1 ~ No.2  
Imaging problems : See No.3 ~ No.9  
Other problems : See No.10 ~ No.13  
Touch Panel Problems: See No. 14 ~ No.16  
Problems  
1. No picture  
Points to check with possible solutions  
Check that the power cord is correctly  
connected. If the problem persists, turn off the  
monitor power for a few minutes, then turn it  
back on and try again.  
Indicator status: Off  
Check the “Brightness” setting.  
Indicator status: Blue  
Switch the signal input by pressing the Input  
Signal Selection Button on the front control  
panel.  
Try pressing a key on the keyboard, or clicking  
Indicator status: Yellow  
the mouse. (p.26)  
Try pressing the power of the computer.  
Indicator status: Flashing Yellow  
(twice for each)  
These message appear when the signal is not  
inputted correctly, even if the monitor functions  
properly.  
2.  
The message below appears.  
This message appears when no signal  
is input. (This is displayed for about  
40 seconds.)  
When the image is displayed correctly after a  
short time, there is no problem with the  
monitor. (Some PCs do not output the signal  
soon after powering on.)  
Check that the PC is turned ON.  
Check that the signal cable is properly  
connected to the PC or graphics board.  
Switch the signal input by pressing the Input  
Signal Selection Button on the front control  
panel.  
Use the graphics board’s utility software to  
change the frequency setting. (Refer to the  
manual of the graphics board.)  
The signal frequency is out of range.  
Error signal frequency will be  
displayed in red.  
6. TROUBLESHOOTING 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
Problems  
Points to check with possible solutions  
Adjust the image position using the <Position>  
3. Display position is incorrect.  
(p.22)  
The two display modes, VGA 720 x 400 (70  
Hz) and 320 x 200 (70 Hz), have the same  
signal timings. Using this adjustment selects the  
appropriate display mode. (This function effects  
only when the resolution is VGA 720 x 400 (70  
Hz) or 320 x 200 (70 Hz).  
If the problem persists, use the graphics board’s  
utility software to change the display position if  
available.  
Decrease the vertical bars using the <Clock>.  
4. Vertical bars of distortion appear.  
(p.21)  
Decrease the horizontal bars using the <Phase>.  
5. Horizontal bars of distortion  
appear.  
(p.21)  
Switch the <Smoothing> mode. (p.22)  
6. Letters and lines appear blurred.  
Adjust the <Contrast and brightness> (The  
baklight of the LCD monitor has a fixed life  
span. When the screen becomes dark or begins  
to flicker, please consult your dealer.)  
7. The screen is too bright or too  
dark.  
Do you use the screen saver or timer when  
displaying the same image for extended periods  
of time? (p.18)  
8. Afterimages appear.  
Afterimages are particular to LCD monitors.  
Avoid displaying the same image for extended  
periods of time.  
This is due to the characteristics of the panel  
9. The screen has defective pixels  
(e.g. slightly light or dark).  
itself, and not the LCD product.  
30 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
Problems  
Points to check with possible solutions  
<Smoothing> is disabled when the screen is  
10.The <Smoothing> cannot be  
selected.  
displayed in the 1024 x768.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto Adjustment Button switch,  
the power on. (p.18)  
11.The Main menu of ScreenManager  
does not operate.  
The adjustment lock is probably on. To unlock:  
switch the LCD monitor off. Then, while  
pressing the Auto Adjustment Button switch,  
the power on. (p.18)  
12.The Auto Adjustment Button does  
not operate.  
The Auto sizing function is intended for use on  
the AT-compatible PC running Windows. It may  
not work properly in either of the following  
cases.  
When running an AT-compatible PC on MS-  
DOS (Not windows).  
The background color for the “wall paper”  
or “desktop” pattern is set to black.  
Some signals from a graphics board may not  
function properly.  
The computer with digital may be in the off  
mode (power indicator flashing yellow). Try to  
press the monitor’s power switch and press the  
Input Signal Selection Button again.  
13.The signal Selection Button does  
not operate.  
6. TROUBLESHOOTING 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Touch Panel problems  
Problems  
Points to check with possible solutions  
The influence of metal may cause jittery cursor.  
14.Cursor is jittery. / Drawing lines  
are not straight and smooth.  
Using the monitor with dual-monitor system  
may cause jittery cursor.  
Run the Stabilize Cursor option from the  
TouchWare (Touch Panel driver).  
When cursor position is incorrect or cursor  
15.Cursor position is not correct. /  
Cursor jumps.  
jumps, turn off and on the monitor.  
The drawing touch (touch operation with  
dragging the finger on the touch panel) to  
draw the picture may cause incorrect cursor  
position.  
Changing the position or angle of the  
monitor while the monitor operation will  
cause cursor jump.  
Keep metals away from the panel surface.  
Point and touch with one finger only. Keep  
other fingers away from the touch screen.  
Do not rest the hand in the monitor or bezel  
while touching the screen.  
Do not touch the screen while the computer  
is starting. Touch the screen after  
disappearing TouchWare starting window.  
Do not touch the screen while turning on the  
monitor. Touch the screen one second later  
after appearing the image.  
The spray for preventing static electricity  
may influences the sensibility of the touch  
panel. Do not use it on cleaning.  
When setting up the baud rate for the touch  
panel, select 9600 bps (default setting), 4800  
bps or 2400 bps. The baud rate of 1200 bps  
may cause continuous touch sound or much  
time requirement for executing touch screen  
calibration or cursor stabilization.  
16.Continuous touch sound./  
Much time requirement for  
executing touch screen  
calibration or cursor stabilization.  
32 6. TROUBLESHOOTING  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
7. CLEANING  
Periodic cleaning is recommended to keep the monitor looking new and to prolong its  
operation lifetime.  
NOTE  
Never use thinner, benzene, ethanol, abrasive cleaners, or other strong solvents, as  
these may cause damage to the cabinet or panel.  
Never use spray for preventing static electricity, as it may influence the sensibility of  
the touch panel.  
Cabinet  
To remove stains, wipe the cabinet with a soft, lightly moistened cloth using a mild  
detergent. Do not spray wax or cleaner directly into the cabinet. (For details, refer to the  
manual of the PC.)  
Panel  
The Panel surface can be cleaned with a soft cloth, such as cotton or lens paper.  
If necessary, stubborn stains can be removed by moistening part of a cloth with water  
or isopropyl alcohl to enhance its cleaning power.  
7. CLEANING 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
8. SPECIFICATIONS  
LCD Panel  
38 cm (15.0 inch), TFT color LCD panel with Anti-Glare  
Hard Coating, Viewing Angle: H: 150°, V: 160° (CR5)  
Response Time: approx. 25 ms  
Dot Pitch  
0.297 mm  
Horizontal Scan Frequency  
Analog: 24 ~ 61 kHz (Automatic)  
Digital: 31 ~ 49 kHz  
Vertical Scan Frequency  
Analog: 55 ~ 75 Hz (Automatic)  
Digital: 59 ~ 61 Hz, (VGA Text : 70Hz)  
0.8 M pixels (1024 dots x 768 lines)  
Resolution  
Dot Clock (Max.)  
Analog: 79 MHz  
Digital: 66 MHz  
Display Colors  
Display Area  
16 million colors (max.)  
304.1 mm (H) ×228.1 mm (V) (11.9” (H) x 8.9” (V))  
(Viewable image size: 381 mm (15.0”))  
Touch Panel OS  
Microsoft Windows 2000/XP  
(Not compatible with MacOS)  
Communication RS-232C serial  
protocol  
Detective method Analog capacitive technology, finger touch  
Power Supply  
100-120/200-240 VAC±10%, 50/60 Hz,  
0.6-0.5 A/0.35-0.3 A  
Power Consumption  
Max.: 35 W (with speaker)  
Power Saving Mode: Less than 3 W  
Input Connector  
D-Sub mini 15 pin, DVI-D  
Separate, TTL, Positive/Negative  
0.7Vp-p/75Positive  
TMDS (Single Link)  
Analog Input Signal (Sync)  
Analog Input Signal (Video)  
Input Signal (Digital)  
Signal registration  
Plug & Play  
Analog: 45 (Factory preset: 12)  
VESA DDC 2B  
Amplifier Output (max.)  
Line input  
1 W + 1 W  
Input impeadance 11 k(min.)  
Input sensitivity: 500 mV  
Dimensions with stand  
without stand  
346 mm (W) x 369 mm (H) x 157 mm (D)  
(13.4”(W) x 14.5”(H) x 6.2”(D))  
346 mm (W) x 301 mm (H) x 54.5 mm (D)  
(13.4”(W) x 11.6”(H) x 1.9”(D))  
Weight  
with stand  
5.0 kg (11.2 lbs.)  
4.1 kg (9.0 lbs.)  
without stand  
34 8. SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
Environment Temperature  
conditions  
Operating: 0 °C ~ 35 °C (32 °F ~ 95 ° F)  
Storage: -20 °C ~ 60 °C (-4 °F ~ 140 ° F)  
Humidity  
Pressure  
30% to 80% R.H. Non-condensing  
860 to 1,060 hPa  
Certifications and Standards  
100-120 VAC  
CB, NRTL/C-TÜV, FCC-B  
200-240 VAC  
CE(93/42/EEC), CB, TÜV Rheinland/GM  
Type of protection against electric shock: Class I  
EMC class: EN60601-1-2 2001: Group1 Class B  
Classification of Equipment  
Classification of medical device (MDD 93/42/EEC): Class I  
Default settings  
Analog input  
Digital input  
Brightness  
Smoothing  
Temperature  
PowerManager  
Input Signal  
Off Timer  
100%  
3
Off (normal white: approx. 6500 K)  
VESA DPMS  
Auto  
DVI DMPM  
Disable  
English  
Language  
Optional  
Touch Panel Pointer  
TP1  
Dimensions  
Unit mm (inches)  
30  
3
54.5  
(2.15)  
346 (13.6)  
306 (12.0)  
32.7  
(1.29)  
23.3  
(0.9)  
1
(0.04)  
135 (5.3)  
157 (6.2)  
8. SPECIFICATIONS 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
English  
Pin Assignment  
D-Sub mini 15 pin connector  
4
3
2
1
5
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
10  
9
8
7
6
11  
14 13 12  
15  
1
2
3
4
5
Red video  
Green video  
Blue video  
Ground  
6
7
8
9
10  
Red ground  
Green ground  
Blue ground  
No pin  
11  
12  
13  
14  
15  
Ground Shorted  
Data (SDA)  
H. Sync  
V. Sync  
Clock (SCL)  
No pin  
Ground Shorted  
DVI-D Connector  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
Pin  
No.  
Signal  
3
1
9
17  
2
4
12  
20  
6
7
8
16  
24  
5
13  
21  
10 11  
19  
14 15  
22 23  
18  
1
2
3
TMDS Data2-  
TMDS Data2+  
TMDS Data2/4  
Shield  
9
10  
11  
TMDS Data1-  
TMDS Data1+  
TMDS Data1/3  
Shield  
17  
18  
19  
TMDS Data0-  
TMDS Data0+  
TMDS Data0/5  
Shield  
4
5
6
7
8
NC*  
NC  
12  
13  
NC  
NC  
+5V Power  
20  
21  
NC  
NC  
DDC Clock (SCL) 14  
DDC Data (SDA) 15 Ground (For +5V) 23  
Analog Vertical  
Sync  
22 TMDS Clock shield  
TMDS Clock+  
TMDS Clock-  
16  
Hot Plug Detect  
24  
(*NC: No Connection)  
RS-232C Port (Mini DIN 6 pin)  
Pin No.  
Signal  
6
5
1
2
3
4
5
6
RXD  
RTS  
CTS  
GND  
TXD  
GND  
4
3
2
1
36 8. SPECIFICATIONS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
English  
9. GLOSSARY  
Clock  
With the analog input signal display, the analog signal is converted to a digital signal  
by the LCD circuitry. To convert the signal correctly, the LCD monitor needs to  
produce the same number clock pulse as the dot clock of the graphics system. When  
the clock pulse is not correctly set, some vertical bars of distortion are displayed on  
the screen.  
Color Temperature (Temperature)  
Color Temperature is a method to measure the white color tone, generally indicated  
in degrees Kelvin. At high temperatures the white tone appears somewhat blue, while  
at lower temperatures it appears somewhat red. Computer monitors generally give  
best performance at high temperature settings.  
5,000 K: Slightly reddish white.  
6,500 K: Warm-white tone, similar to white paper or daylight.  
9,300 K: Slightly bluish white.  
DVI  
(Digital Visual Interface)  
A digital flat panel interface. DVI can transmit digital data from the PC directly  
without loss with the signal transition method “TMDS”.  
There are two kinds of DVI connectors. One is DVI-D connector for digital signal  
input only. The other is DVI-I connector for both digital and analog signal inputs.  
DVI DMPM  
(DVI Digital Monitor Power Management)  
The Power management system for the digital interface. The “Monitor ON” status  
(operation mode) and the “Active Off” status (power-saving mode) are indispensable  
for the DVI-DMPM as the monitor’s power mode.  
Gain Adjustment  
Adjusts each color parameter for red, green and blue. The color of the LCD monitor  
is displayed through the color filter of the LCD panel. Red, green and blue are the  
three primary colors. The colors on the monitor are displayed by combining these  
three colors. The color tone can change by adjusting the illumination amount passed  
through each color’s filter.  
Gamma  
Generally, the relationship that the light intensity values of a monitor change  
nonlinearly to the input signal level is called “Gamma Characteristic”. On the  
monitor, low gamma values display the whitish images and high gamma values  
display the high contrast images.  
9. GLOSSARY 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
English  
Phase  
The phase adjustment decides the sampling timing point for converting the analog  
input signal to a digital signal. Adjusting the phase after the clock adjustment will  
produce a clear screen.  
Range Adjustment  
The Range Adjustment controls the level of output signal range to display the whole  
color gradation.  
Resolution  
The LCD panel consists of a fixed number of pixel elements which are illuminated to  
form the screen image. The EIZO L352T-C display panel consists of 1024 horizontal  
pixels and 768 vertical pixels. At a resolution of 1024 x768, all pixels are displayed  
as a full screen.  
sRGB (Standard RGB)  
“International Standard for Red, Green, and Blue color space”  
A color space was defined with the aim of the color matching between applications  
and hardware devices, such as monitors, scanners, printers and digital cameras. As a  
standard default space, sRGB allows Internet users to closely match colors.  
TMDS  
(Transition Minimized Differential Signaling)  
A signal transition method for the digital interface.  
VESA DPMS  
(Video Electronics Standards Association - Display Power Management Signaling)  
The acronym VESA stands for “Video Electronics Standards Association”, and  
DPMS stands for “Display Power Management Signaling.”DPMS is a communication  
standard that PCs and graphics boards use to implement power savings on the  
monitor side.  
38 9. GLOSSARY  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
APPENDIX/ANHANG/ANNEXE  
Preset Timing Chart for Analog input  
Timing-Übersichten für Analog Eingang  
Synchronisation des Signaux pour Analog numerique  
Based on the signal diagram shown below 12 factory presets have been registered in the  
monitor's microprocessor.  
Der integrierte Mikroprozessor des Monitors unterstützt 12 werkseitige  
Standardeinstellungen (siehe hierzu die nachfolgenden Diagramme).  
12 signaux ont été enregistrés en usine dans le microprocesseur du moniteur,  
conformément au diagramme de synchronisation ci-dessous.  
Sync Polarity  
Frequencies  
H kHz V Hz  
Dot Clock  
MHz  
Mode  
H
V
VGA Mode13  
320 × 200  
25.2  
25.2  
28.3  
31.5  
31.5  
36.0  
40.0  
50.0  
49.5  
65.0  
75.0  
78.8  
Nega. Nega.  
Nega. Nega.  
Nega. Posi.  
Nega. Nega.  
Nega. Nega.  
31.47  
31.47  
31.47  
37.86  
37.50  
35.16  
37.88  
48.08  
46.88  
48.36  
56.48  
60.02  
70.09  
59.94  
70.09  
72.81  
75.00  
56.25  
60.32  
72.19  
75.00  
60.00  
70.07  
75.03  
VGA  
640 × 480  
VGA  
720 × 400  
VESA  
640 × 480  
VESA  
640 × 480  
VESA  
800 × 600  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
Posi.  
VESA  
800 × 600  
VESA  
800 × 600  
VESA  
800 × 600  
VESA  
1024 × 768  
Nega. Nega.  
Nega. Nega.  
VESA  
1024 × 768  
VESA  
Posi.  
Posi.  
1024 × 768  
APPENDIX/ANHANG/ANNEXE  
i
Download from Www.Somanuals.com. All Manuals Search And Download.  
For U.S.A, Canada, etc. (rated 100-120 Vac) Only  
FCC Declaration of Conformity  
We, the Responsible Party  
EIZO NANAO TECHNOLOGIES INC.  
5710 Warland Drive, Cypress, CA 90630  
Phone: (562) 431-5011  
declare that the product  
Trade name: EIZO  
Model: FlexScan L352T  
is in conformity with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause undesired  
operation.  
This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide  
reasonable protection against harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio frequency energy and, if not installed and  
used in accordance with the instructions, may cause harmful interference to radio  
communications. However, there is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause harmful interference to radio or  
television reception, which can be determined by turning the equipment off and on, the user  
is encouraged to try to correct the interference by one or more of the following measures.  
* Reorient or relocate the receiving antenna.  
* Increase the separation between the equipment and receiver.  
* Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
* Consult the dealer or an experienced radio/TV technician for help.  
Changes or modifications not expressly approved by the party responsible for compliance  
could void the user’s authority to operate the equipment.  
Note  
Use the attached specified cable below or EIZO signal cable with this monitor so as to keep  
interference within the limits of a Class B digital device.  
- AC Cord  
- Shielded Signal Cable  
- Stereo mini-jack cable  
Canadian Notice  
This Class B digital apparatus complies with Canadian ICES-003.  
Cet appareil numérique de le classe B est comforme à la norme NMB-003 du Canada.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hinweise zur Auswahl des richtigen Schwenkarms für Ihren Monitor  
Dieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum  
Standardzubehör gehörige Schwenkarm verwendet wird, muss statt dessen ein geeigneter  
anderer Schwenkarm installiert werden. Bei der Auswahl des Schwenkarms sind die  
nachstehenden Hinweise zu berücksichtigen:  
Der Standfuß muß den nachfolgenden Anforderungen entsprechen:  
a) Der Standfuß muß eine ausreichende mechanische Stabilität zur Aufnahme des Gewichtes  
vom Bildschirmgerät und des spezifizierten Zubehörs besitzen. Das Gewicht des  
Bildschirmgerätes und des Zubehörs sind in der zugehörenden Bedienungsanleitung  
angegeben.  
b) Die Befestigung des Standfusses muß derart erfolgen, daß die oberste Zeile der  
Bildschirmanzeige nicht höher als die Augenhöhe eines Benutzers in sitzender Position ist.  
c) Im Fall eines stehenden Benutzers muß die Befestigung des Bildschirmgerätes derart  
erfolgen, daß die Höhe der Bildschirmmitte über dem Boden zwischen 135 – 150 cm  
beträgt.  
d) Der Standfuß muß die Möglichkeit zur Neigung des Bildschirmgerätes besitzen (max.  
vorwärts: 5°, min. nach hinten 5°).  
e) Der Standfuß muß die Möglichkeit zur Drehung des Bildschirmgerätes besitzen (max.  
180°). Der maximale Kraftaufwand dafür muß weniger als 100 N betragen.  
f) Der Standfuß muß in der Stellung verharren, in die er manuell bewegt wurde.  
g) Der Glanzgrad des Standfusses muß weniger als 20 Glanzeinheiten betragen (seidenmatt).  
h) Der Standfuß mit Bildschirmgerät muß bei einer Neigung von bis zu 10° aus der  
normalen aufrechten Position kippsicher sein.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recycle Auskunft  
Die Rücknahme dieses Produktes nach Nutzungsende übernimmt EIZO in Deutschland  
zusammen mit dem Partner eds-r gmbh rucknahmesysteme. Dort werden die Geräte in ihre  
Bestandteile zerlegt, die dann der Wiederverwertung zugeführt werden. Um einen Abholtermin  
zu vereinbaren und die aktuellen Kosten zu erfahren, benutzen Sie bitte folgende Rufnummer:  
02153-73 35 00. Weitere Informationen finden Sie auch unter der Internet-Adresse:  
Recycling Information for customers in Switzerland:  
All recycling information is placed in the SWICO’s website.  
Recycling-Information für Kunden in der Schweiz:  
Alle Informationen zum Thema Recycling finden Sie auf der Homepage des Brancheverbandes  
SWICO.  
Renseignements de recyclage pour les clients en Suisse:  
Vous trouvez tous les renseignements pour le sujet de recyclage sur la page WEB de I’UNION  
DE BRAN CHE SWICO.  
Recycling Information for customers in USA:  
All recycling information is placed in the EIZO Nanao Technologies, Inc’s website.  
Återvinnings information för kunder i Sverige:  
All information om återvinning finns på Eizo Europe AB:s hemsida:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edimax Technology Home Theater Server WP S1000 User Manual
Electro Voice Portable Speaker EJ1 X User Manual
Extron electronic Power Supply VSC 900 User Manual
Fellowes Paper Shredder 99705 User Manual
Fujitsu Printer DL1150 1250 User Manual
FUNAI CRT Television CR270TT8 User Manual
Fusion Marine Instruments MS RA50 User Manual
Fusion Speaker NVSW12 User Manual
GE Oven JKP20 JTP20 JKP28 JKP48 JTP28 JTP48 User Manual
Global Machinery Company Air Compressor MOC6L User Manual