2mm pitch metric connectors
For pcb connection
Fcn-086 /087 series
noVerVieW
Fujitsu’s 2mm hard metric connector F-PACK-3 (FCN-086/087 series) are connectors for connecting boards
developed to support high-speed transmission/high density packaging of communication equipment,
conforms to IEC 917 (DIN 43355) and IEC 61076-4-101, and supports compact PCI. Product meets Bellcor
1217. To support high-speed transmission, these connectors implement low inductance, low cross-talk, and
matching characteristic impedance (50 ohms), exhibiting superb transmission characteristics.
Connection with the PCB is solderless (press fit) for both the plug/socket side, making mounting cost effective.
Insertion connections are completely unnecessary since a polarity key is supported.
Plug contact has a four level sequence structure that makes connection/disconnection in an active state
possible. Terminals have a five level pin length to support various applications. New customized connectors
can be supported by freely combining the pin lengths of contacts and terminals.
For shield plate products, which support high-speed transmission based on standard products, 5 row 55,
95, 110, 110 (with key) and 125 contact, plugs support 77, 133, 154 and 175 contacts. The shield plate
corresponds to the respective number of contacts, and the standard is post attachment. Sockets can also
be shipped with shields pre-attached.
8 row products are also in the series. Consult factory for your requirements.
Fujitsu has developed a new high density power connector (25% denser) to improve operability.
A double press fit, which can connect two printed boards with one connector, greatly contributes to
improved mounting and decreasing cost. Consult factory for details.
ꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 / 087 series
nterminal conFiguration oF plug
The contact pins have a three-level sequence structure and can be connected/disconnected in an ac-
tive state. The terminal side can support various applications with four types of length. These combi-
nations allow 20 types of terminals.
Relationship between housing and terminals
Terminal types in the series
Contact length
PWB Surface
Lead length
PC Board Face
Contact Types
Contact length
PWB Surface
Lead length
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢁ
Fcn-086 / 087 series
Request Form for Customer Specific Pin Arrangement for 2mm Connectors
Part of the benefit of using the FCN-086 2mm Backplane connector is the flexibility of creating unique
contact loads in the connector body. To define your needs, make a photocopy of the following page(s),
select your connector needs, and fill in the blanks with the specific contact designation (see page 5 for
available contacts). Forward to Fujitsu for quotation and part number assignment. (Please note that the pin
arraignment drawings are "View from the Mating Side").
1. TYPE A (110 pos. with polarization key) (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11
2. TYPE B (125 pos.) (5+2)
1516 17 18 19 20 2122 23 2425
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 2122 23 2425
3. TYPE C (55 pos.) (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11
4. 95 pos. (5+2)
f
e
d
c
b
a
z
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ
Fcn-086 / 087 series
n transmission characteristics
The transmission characteristics were designed to an optimum level by repeating various transmission
characteristics simulations when the structure was designed, so as to improve the transmission character-
istics of this connector. The characteristic impedance and the measurement device of the connector are
shown below.
Measurement Point
Measurement Result
a
b
c
Fujitsu Components
At Start
100 ps
300 ps
500 ps
1 ns
d
e
Frequency: Hz
1.75 GHz
580 MHz
350 MHz
175 MHz
Characteristic Impedance (
Near/Far end cross talk: %
)
45.3 to 64. 0 48.2 to 56.8 49.2 to 54.6 49.3 to 52.8
Ω
Ground
Not connected
1.96/1.14
1.49/0.78
1.06/0.51
0.71/0.27
Measurement signal
Other Supplier
At Start
100 ps
300 ps
500 ps
1 ns
Frequency: Hz
1.75 GHz
580 MHz
350 MHz
175 MHz
Characteristic Impedance (
Near/Far end cross talk: %
)
47.4 to 66. 1 48.2 to 56.8 49.5 to 59.2 47.7 to 53.5
Ω
2.24/1.41
1.57/0.98
1.14/0.67
0.78/0.35
300.0m
Delay Time
signal
10.00m
V/Div.
Characteristic
Impedance
in
out
200.0m
49.00n
50.00n
100.0p S/Div
PC board part
PC board part PC board part
1.Measurement voltage: Vin = 5.0V
2.Rise time: Tr = 100ps, 300ps, 500ps, 1ns
3.Measurement device: TDR measurement device CSA803 and SD24 (Tektronix)
4.Measurement system
Coaxiaclableformeasurement
Ω
50Ω terminaticoonnnect
o
Plug
Socket
CSA 80.3
SD 24
Measurementboard
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Fcn-086 /087 series compact pci / Vme
nstandard and hot sWap part numbers
Coding Keys for Daughter Card
Coding Keys for Midplane/Backplane
FCN-086A3456 - 3.3V
FCN-086B1278 - 3.3V
P1
or
J1
or
FCN-086A2348 - 5.0V
FCN-086B2348 - 5.0V
Backplane
Female
Receptacles
MalePin
Headers
Female
Receptacles
1
J5
4
5
P5
P4
RJ5 1
2
3
1
J4
J3
J2
RJ4
RJ3
RJ2
2
3
1
6
4
P3
P2
Standard
5
2
J1
HotSwap P1
7
Reference
Number
Part Number
Designations
160.0(63.0)
J5, J2, RJ5,
RJ2
1
FCN-086J110-G111A-BCR
FCN-086J110-G111-BCR
2
3
4
5
6
7
8
9
J4, J1, RJ4
ncomputer telephony part numbers
FCN-086J095-G111A-BCR J3, RJ3
FCN-086P154-G/111A-BCR P5, P2
Coding Keys for Midplane/
Backplane
FCN-086A3456 - 3.3V
Coding Keys for Daughter Card
FCN-086P154-G/104-BCR
P4, P1
FCN-086B1278 - 3.3V
or
J1
FCN-086P133-G/111A-BCR P3
P1
or
FCN-086B2348 - 5.0V
FCN-086B3567 - J4
FCN-086P154-G/114-BCR
Future Products
P1
FCN-086A2348 - 5.0V
FCN-086B1248 - P4
J4, P5
P4
FCN-086P154-G/516-BCR
Backplane
Female
Receptacles
Male Pin
Headers
Female
Receptacles
P5
8
J5
1
RJ5
RJ3
1
9
P4
P3
P2
8
3
1
J4
J3
3
6
4
J2
J1
2
P1
7
160.0 (6.30)
80.0 (3.15)
Specifications
subject to change
Dimensions are in millimeters (inches)
6-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 /087 series compact pci / Vme
pꢁ type ꢁ
STRAIGHT PLUG (133 POSITIONS)
nmounting hole layout
ndimensions
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: φ0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): φ0.6±0.05
mm (.024)
+0.2
9.7
0
3.7
(0.146)
+0.008
(0.382
)
0
+0.2
11.2
0
3.7
(0.146)
+0.008
(0.440
)
0
2x(7-1)=12
(0.472)
2
2x(19-1)=36±0.1 (1.417±0.004)
2±0.5
(0.079±0.002)
(0.079)
2
2
(0.079)
2x(7-1)=12
(0.079)
2x(19-1)=36 (1.417)
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P133-G/111A-BCR
pꢁ type b male Feed through
STRAIGHT PLUG (133 POSITIONS)
ndimensions
nmounting hole layout
Thickness: 1.4 to 5.6 mm (.055 to .220
+0.2
11.2
0
3.7
(0.146)
in.)
+0.008
(0.440
)
0
Drill hole Diameter: φ0.7±0.025 mm (.028
+0.2
0
(0.039
8.2
in.)
+0.008
)
16 (0.630)
16 (0.630)
+0.2
11.2
0
+0.008
0
(0.440
)
2x(7-1)=12
(0.472)
2x(19-1)=36 ±0.1 (1.417±0.004)
2
2±0.5 (0.079±0.002)
(0.079)
2
2
(0.079)
(0.079)
2x(19-1)=36 (1.417)
2x(7-1)=12
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P133-G/502A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 /087 series compact pci / Vme
pꢀ/pꢂ type a
STRAIGHT PLUG (154 POSITIONS)
nmounting hole layout
ndimensions
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
+0.2
0
8.2
3.7
(0.146)
+0.008
(0.039
)
+0.2
0
+0.008
9.7
3.7
(0.146)
(0.382
)
+0.2
0
11.2
3.7
(0.146)
+0.008
0
(0.440
)
8±0.5
(0.315±0.002)
2x(11-1)=20±0.5
2x(11-1)=20±0.5
2x(7-1)=12
(0.472)
(0.787±0.002)
(0.787±0.002)
4±0.5
(0.157±0.002)
2±0.5
(0.079±0.002)
2
(0.079)
2
(0.079)
2
(0.079)
2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
2x(7-1)=12
24 (0.945)
(0.472)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/104-BCR
P2/P5 TYPE B
STRAIGHT PLUG (154 POSITIONS)
ndimensions
nmounting hole layout
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
+0.2
9.7
0
3.7
(0.146)
+0.008
0
(0.382
)
+0.2
11.2
3.7
0
+0.008
0
(0.146)
(0.440
)
2x(22-1)=42±0.1 (01.654±0.004)
2x(7-1)=12
(0.472)
2±0.5
(0.079±0.002)
2
(0.079)
2
2 (0.079)
(0.079)
2x(22-1)=42(1.654)
2x(7-1)=12
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/111A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
6-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 /087 series compact pci / Vme
pꢀ type a hot sWap ꢀꢀ0 signal connector
STRAIGHT PLUG (154 POSITIONS)
nmounting hole layout
ndimensions
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
+0.2
0
+0.008
8.2
3.7
(0.146)
(0.039
)
+0.2
0
+0.008
9.7
3.7
(0.146)
(0.382
)
+0.2
11.2
3.7
0
(0.146)
+0.008
0
(0.440
)
8±0.5
(0.315±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
2x(7-1)=12
(0.472)
2±0.5
(0.079±0.002)
4±0.5
(0.157±0.002)
2
(0.079)
2
(0.079)
2
(0.079)
2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
2x(7-1)=12
(0.472)
24 (0.945)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/114-BCR
pꢂ type a male Feed through
STRAIGHT PLUG (154 POSITIONS)
ndimensions
nmounting hole layout
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
+0.2
0
(0.039
8.2
+0.008
)
16 (0.630)
16 (0.630)
+0.2
0
11.2
+0.008
0
(0.440
)
2x(7-1)=12
(0.472)
8±0.5
(0.315±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
2x(11-1)=20±0.5
(0.787±0.002)
4±0.5
2
2±0.5
(0.079±0.002)
(0.079)
(0.157±0.002)
2
(0.079)
2
(0.079)
2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
2x(7-1)=12
24 (0.945)
(0.472)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154G/401-BCR
Specifications
Dimensions are in millimeters (inches)
subject to change
6-ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 /087 series compact pci / Vme
type 2 Feed through
STRAIGHT PLUG (154 POSITIONS)
nmounting hole layout
ndimensions
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
Ø0.6±0.05 mm (.024)
8.2+0.2
0
(0.039+0.008
)
16 (0.630)
16 (0.630)
11.20+0.2
(0.440+0.008
)
0
2x(7-1)=12
(0.472)
2
2x(22-1)=42±0.1
(0.079)
(1.654±0.004)
2±0.5 (0.079±0.002)
2
(0.079)
154 - Ø0.6±0.05
(0.024±0.002)
2
(0.079)
2x(22-1)=42 (1.654)
2x(7-1)=12
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/401A-BCR
type 2 Feed through
STRAIGHT PLUG (154 POSITIONS)
ndimensions
nmounting hole layout
11.20+0.2
(0.440+0.008
3.7
(0.146)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
Ø0.6±0.05 mm (.024)
)
0
8.2+0.2
0
(0.039+0.008
0
)
16 (0.630)
11.20+0.2
16 (0.630)
(0.440+0.008
)
0
2x(7-1)=12
(0.472)
2x(22-1)=42±0.1 (1.654±0.004)
2
2±0.5
(0.079±0.002)
(0.079)
154 - Ø0.6±0.05
(0.024±0.002)
2
2
(0.079)
2x(22-1)=42 (1.654)
(0.079)
2x(7-1)=12
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/502A-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
6-ꢀ0
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 /087 series compact pci / Vme
P5 TYPE B FEEd THRU COmPUTER TELEPHONY CONNECTOR
STRAIGHT PLUG (154 POSITIONS)
nmounting hole layout
ndimensions
+0.2
0
11.2
3.7
(0.146)
+0.008
0
(0.440
)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
+0.2
0
8.2
+0.008
0
(0.039
)
16 (0.630)
+0.2
0
11.2
+0.008
0
(0.440
)
16 (0.630)
2x(7-1)=12
(0.472)
2x(22-1)=42±0.1 (1.654±0.004)
2±0.5
(0.079±0.002)
2
(0.079)
154 - Ø0.6±0.05
(0.024±0.002)
2
(0.079)
2
2x(22-1)=42 (1.654)
(0.079)
2x(7-1)=12
(0.472)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/503A-BCR
pꢂ type a computer telephony connector
STRAIGHT PLUG (154 POSITIONS)
ndimensions
nmounting hole layout
8.2+0.2
0
3.7
(0.146)
Thickness: 1.4 to 5.6 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
(0.039+0.008
)
0
9.7+0.2
3.7
(0.146)
(0.382+00.008
0
)
11.20+0.2
3.7
(0.146)
(0.440+0.008
)
0
8±0.5
2x(11-1)=20±0.5
2x(11-1)=20±0.5
(0.315±0.002)
(0.787±0.002)
(0.787±0.002)
2x(7-1)=12
4±0.5
(0.157±0.002)
(0.472)
2±0.5
(0.079±0.002)
2
(0.079)
2
(0.079)
2
(0.079)
2x(11-1)=20 (0.787)
2x(11-1)=20 (0.787)
24 (0.945)
2x(7-1)=12
(0.472)
48 (1.890)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086P154-G/516-BCR
Specifications
subject to change
Dimensions are in millimeters (inches)
6-ꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 / 087 series
SOCKET: 55 CONTACTS
ndimensions
2 x (11-1) = 20 (.787)
2 (.079)
10.95 (0.431)
3.7
(0.146)
3.4
(0.134)
2.35
(.093)
2
(.079)
e
d
nmounting hole layout
b
a
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
25 (.984)
2 x (11-1) = 20 (.787)
2 (.079)
2
(.079)
2 x (5-1) = 8 (.315)
11.4 (0.449)
2±0.05 (.079±0.002)
Section A-A
2x (11-1)=20±0.05
(0.787±0.002)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086J055-G/101-BCR
FCN-086J055-G/111-BCR (with pre-attached upper shield)
shield plate
ndimensions
ndimensions
4 x (6-1)=20 (0.787)
4±0.2
(0.157±0.008)
4 x (5-1)=16 (0.630)
4±0.2
(0.157±0.008)
21.7±0.2 (0.854±0.008)
21.7±0.2 (0.854±0.008)
2±.1
2±.1
(.079±.004)
0.40-0.1
(.079±.004)
90°
0.40-0.1
(0.0160-0.004
)
(0.0160-0.004
)
1
0.7±0.1
(0.039)
(0.0281±0.004)
0.7±0.1
(0.0281±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
2 x (11-1)=20 (0.787)
1
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
(0.039)
21.15 MAX.
(0.833)
2 x (11-1)=20 (0.787)
21.15 MAX.
Unit: mm (in.)
(0.833)
Unit: mm (in.)
n
ordering part number:
n
ordering part number:
FCN-086J055-G/LSD-BCR (bottom shield
FCN-086J055-G/USD-BCR (top shield plate)
plate)
Specifications
Dimensions are in millimeters (inches)
subject to change
ꢀ2
Download from Www.Somanuals.com. All Manuals Search And Download.
Fcn-086 / 087 series
SOCKET: 95 NTACTS
ndimensions
2 x (19-1) = 36 (1.41
2 (.079)
10.95 (0.431)
2
3.7
(0.146)
3.4
2.35
(.093) (.079)
(0.134)
e
d
A
nmounting hole layout
b
a
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05
mm (.024)
A
38 (1.470)
2
(9)
2 x (19-1) = 36 (1.417)
2 x (5-1) = 8 (.315)
2 (.079)
11.4 (0.449)
Section A-A
2±0.05 (.079±0.002)
2x (19-1)=36±0.05
(1.417±0.002)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086J095-G/101A-BCR
FCN-086J5-G/11A-BCR (with pre-attached upper shield)
shield plate
dimensio
ndimensions
4 x (10-1)=36 (1.417)
4±0.2
(0.157±0.008)
4 x (9-1)=3(1.260)
(0.15±0.8)
37.7±0.2 (1.484±0.0)
21
(.79±.04)
2±.1
0.0-0.1
(.079±.004)
(0.0160
)
0.40-0.1
(0.0160
)
-0.004
0.7±0.1(0.028
1±0.1 004)
2±0.1(0.079±0.004
2 x (19-1)=36(1.417)
37.15 MAX. (1.463)
0.7±0.1(0.0281±0.004)
1
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
(0.039)
1
2 x (19-1)=36(1.417)
37.15 MAX. (1.463)
(0.039)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number:
n
ordering part number:
FCN-086J095-G/VSD-BCR (top shield plate)
FCN-086J095-G/MSD-BCR (bottom shield plate)
Specifications
Dimensions are in millimeters (inches)
subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢁ
Fcn-086 / 087 series
socKet: ꢀꢀontacts
ndimensions
48 (1.890)
2 x (11-1
2 x (11-120 (0.898)
2 (.079)
10.95 (0.431)
2
3.7
2.35
(0.146)
3.4
(.093) (.079)
(0.134)
e
d
nmounting hole layout
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: Ø0.7±0.025 mm (.028 in.)
Through hole diameter (after plating): Ø0.6±0.05 mm
(.024)
b
a
50 (1.969)
48 (1.890)
(.079)
2 x (5-1) = 8 (.315)
2 x (11-1) = 20 (0.898)
2 x (11-1) = 20 (0.898)
2 (.079)
2 (.079)
11.4 (0.449)
Seion A-A
2±0.05 (.079±0.002)
2x (25-1)=48±0.05
(1.890±0.002)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FN-086J110-G/101-BCR
FCN-086J110-G/111-BCR (with pre-attached upper shield)
shield plate
ndimensions
ndimensi
4 x (13-1)=48 (1.890)
4 x (12-1)=(1.2)
4±0.2
4±0.2
157±0.)
(0.157±0.008)
49.70.2 (1.957±0.008)
49.7±0.2 (1.957±0.008)
2±.1
2
(.079±.004)
0.40-0.1
.004
)
(0.0160-0.004
)
00.1
(0.02±0.004)
±.1(.004)
2±.17)
2 x 11-1
0.7±0.1
(0.0281±0.004)
6.35±0.15
(0.25±0.006)
1 (0.139)
6.35±0.15
(0.25±0.006)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
1
2 x (11-1)=20 (0.787)
2 x (11-1)=20
(0.787)
(0.039)
49.15 MAX. (0.78)
(1.935)
2 x (11-1)=20 (0.787)
49.15 MAX.
(1.935)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number:
n
ordering part number:
FCN-086J110-G/USD-BCR (with key, top
shield plate)
FCN-086J110-G/LSD-BCR (with key,
bottom, shield plate)
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀꢂ
Fcn-086 / 087 series
socKet: ꢀꢀ0 contacts Without Key
ndimensons
2 x (24(1.654)
2 (.079)
10.95 (0.431)
3.7
2.35
(.093)
(0.146)
3.4
(0.134)
2
(.079)
e
d
nmounting hole layout
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
∅0.6±0.05 mm (.024)
b
a
44 (1.732)
2 x (22-1) = 42 (1.654)
2
(.079)
2 (9)
2 x ) = 8 (.31
11.4 (0.44
Section A-A
2±0.05 (.079±0.002)
2x (22-1)=36±0.05
(1.654±0.002)
Unit: mm (in.
Unit: mm (in.)
n
ordering part number: FCN-086J110-G/101A-BCR
FCN-086J110-G/111A-BCR (with pre-attached upper shield)
shield plate
ndimensions
ndimensions
4 x (11-1)=40 (1.575)
4±0.2
(0.157±0.008)
ꢃꢈ[ꢈꢆꢅꢅꢄꢉ ꢃꢁꢈꢆꢅꢂꢍꢎꢍꢉ
ꢃꢁꢂꢋꢈ
ꢁꢂꢅꢍꢎꢁꢂꢁꢁꢌꢉ
ꢃꢊꢂꢎꢁꢂꢋꢈꢆꢅꢋꢁꢁꢂꢁꢁꢌꢉ
43.7±0.2 (1.720±0.008)
ꢋꢂꢅ
2±.1
(.079±.004)
ꢆꢂꢁꢎꢀꢂꢁꢁꢃꢉ
ꢁꢂꢃꢁꢄꢁꢂꢅ
ꢆꢁꢂꢁꢅꢇ
0.40-0.1
ꢁꢈꢈꢈꢈꢈꢈꢈꢈꢈ
ꢄꢁꢂꢁꢁꢃ
ꢉ
(0.0160-0.004 )
ꢅ
0.7±0.1
(0.0281±0.004)
ꢁꢂꢁꢂꢁꢋꢌꢅꢁꢂꢁꢁꢃꢉ
1
ꢆꢁꢂꢁꢊꢀꢉ
ꢅꢁꢂꢅꢈꢆꢁꢂꢅꢊꢀꢁꢂꢁꢁꢃꢉ
ꢋꢁꢂꢅꢁꢎꢀꢁꢂꢁꢁꢃꢉ
(0.039)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
ꢋꢈ[ꢈꢆꢋꢋꢄꢅꢉ ꢃꢋꢇꢍꢃꢉ
ꢃꢊꢂꢅꢍꢈ0ꢂꢈꢆꢅꢂꢇꢀꢀꢉ
2 x (22-1)=42(1.654)
43.15 MAX.
(1.699)
Unit: mm (in.)
nit: mm (in.)
n
ordering part number:
n
ordering part number:
FCN-086J110-G/VSD-BCR (without key, top
shield plate)
FCN-086J110-G/MSD-BCR (without key,
bottom shield plate)
Specifications
Dimensions are in millimeters (inches)
subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Fcn-086 / 087 series
SOCKET: 125 CONTACTS
ndimensions
1.890)
2 (.079)
10.95 (0.431)
2
3.7
(0.146)
3.4
2.35
(.093) )
(0.134)
e
d
nmounting hole layout
b
Thickness: 1.4 to 2.0 mm (.055 to .220 in.)
Drill hole Diameter: ∅0.7±0.025 mm (.028 in.)
Through hole diameter (after plating):
∅0.6±0.05 mm (.024)
50 (1.969)
2 x (25-1) = 48 (1.890)
2 (.079)
2
(.079)
2 x (58 5)
11.4 (9)
SA
2±0.05 (.079±0.002)
2x (25-1)=48±0.1
(1.890±0.004)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number: FCN-086J125-G/101-BCR
FCN-086J125111-BCR (with pre-attached upper shield)
shield plate
ndimensions
ndiensions
4 x (13-1)=48 (1.890)
4 12-1)=44 (1.732)
4±0
4±0.2
(0.157±0.008)
(0.157±0.00
49.7±0.2 (57±0.008)
49.7±0.2 (1.957±0.008)
2±.1
2±.1
(.079±.004
(.079±.004)
0.40-0.1
0.40-0.1
(0.0160-0.004
)
(0.0160-0.004
)
1(0.039)
1
0.7±0.1
(0.0281±0.004)
0.7±0.1
(0.0281±0.004)
(0.039)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
1±0.1 (0.139±0.004)
2±0.1(0.079±0.004)
2 x (25-1)=48(1.890)
2 x (25-1)=48(1.890)
49.15 MAX.
(1.935)
49.15 MAX.
(1.935)
Unit: mm (in.)
Unit: mm (in.)
n
ordering part number:
n
ordering part number:
FCN-086J125-G/LSD-BCR (bottom shield plate)
FCN-086J125-G/USD-BCR (top shield plate)
Specifications
Dimensions are in millimeters (inches)
subject to change
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ6
Fcn-086 / 087 series
coding Key
ndimensions
ndimensions
9.2 (0.362)
8.9 (0.350)
n
ordering part number:
FCN-086B1247
n
n
ordering part number:
FCN-086A3568
Quanties: 50 pieces/package; minium order quanity: 500 piecs
combination oF coding Keys
Plug
Plug
Jack
Jack
Color
Color
Nut brown
Reseda green
4578
4567
3567
3457
2348
1346
1258
1248
1247
1236
1238
1248
1268
1567
2578
3467
3567
3568
Ultramarine
blue
Slate gray
Strawberry
red
Antique pink
Pastel orange
Olive yellow
Brilliant blue
n
ordering part numbers:
Plug Coding Key: FCN-086A****
Jack Coding Key: FCN-086B****
****: Add Coding Key number: eg: FCN-086A1268
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ7
Fcn-086 / 087 series
Fujitsu Components International Headquarter Offices
Japan
europe
Fujitsu Component Limited
Gotanda-Chuo Building
3-5, Higashigotanda 2-chome, Shinagawa-ku
Tokyo 141, Japan
Fujitsu Components Europe B.V.
Diamantlaan 25
2132 WV Hoofddorp
Netherlands
Tel: (81-3) 5449-7010
Fax: (81-3) 5449-2626
Email: [email protected]
Tel: (31-23) 5560910
Fax: (31-23) 5560950
Email: [email protected]
Web: emea.fujitsu.com/components/
North and South America
Fujitsu Components America, Inc.
250 E. Caribbean Drive
Sunnyvale, CA 94089 U.S.A.
Tel: (1-408) 745-4900
Asia Pacific
Fujitsu Components Asia Ltd.
102E Pasir Panjang Road
#01-01 Citilink Warehouse Complex
Singapore 118529
Fax: (1-408) 745-4970
Tel: (65) 6375-8560
Email: [email protected]
Fax: (65) 6273-3021
Email: [email protected]
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. August 15, 2007
Specifications
subject to change
Dimensions are in millimeters (inches)
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ8
|