DFX 100 Series • Setup Guide
The Extron DFX 100 Series consists of a transmitter (DFX 100 Tx) and receiver (DFX 100 Rx)
that use one multimode fiber optic cable to extend a DVI-D signal up to 984 feet (300 m).
This guide provides basic instructions for an experienced installer to set up and operate the
Installation
Step 1 — Mounting
Mount the DFX 100 Tx close to the DVI source and the DFX 100 Rx close to the DVI display
device. See the DFX 100 Series User Guide for all mounting options. Follow the instructions
provided with the appropriate installation kit.
Step 2 — Cable Connections
DFX 100 Series Front Panel
DFX 100 Tx Rear Panel
DFX 100 Rx Rear Panel
POWER
POWER
DFX 100 Tx
DFX 100 Rx
12V
12V
-
-
A
MAX
-
-
A
MAX
b
d
b
f
a
OUTPUT
INPUT
Extron
c
INPUT
OUTPUT
e
1. Connect one of the provided 12 VDC power supplies to the rear panel captive screw
connectors of the transimtter and the other to the receiver ( ).
b
ATTENTION: Before connecting power to the DFX 100 Tx or Rx, see the attention
box in the “Power Supply” section of the DFX 100 Series User Guide for important
information about power supplies.
NOTES:
•
•
•
When the units receive power but no input signals, the front panel LED ( ) lights
amber.
When the transmitter receives power and a DVI input signal, the front panel LED lights
green
When the receiver receives power and a fiber optic input signal, the front panel LED
lights green.
a
2. Connect the DFX 100 Tx output ( ) to the DFX 100 Rx input ( ) using one multimode
d
f
cable (not provided).
WARNING: Possible Damage to Eyesight. The DFX 100 outputs continuous
invisible light (Class 1 rated), which may be harmful and dangerous to the eyes; use
with caution. Do not look into the rear panel fiber optic cable connector or into the
fiber optic cable itself. Plug the attached dust cap into the optical transceiver when
the fiber optic cable is unplugged.
3. Connect the DVI display to the DVI output connector of the DFX 100 Rx ( ). Power on the
e
display.
Download from Www.Somanuals.com. All Manuals Search And Download.
DFX 100 Series • Setup Guide (Continued)
4. Connect the DVI source to the DVI input connector of the DFX 100 Tx ( ). Power on the
c
source.
NOTE: Although the transmitter and receiver have DVI-I connectors, both devices are
compatible only with a single link DVI-D signal.
Application Diagram
Extron
DFX 100 Tx
Transmitter
DFX 100 Tx
R
E
W
O
P
12V
X
-
A
MA
OUTPUT
T
INPU
Fiber
Up to 300m ( 984 ft )
on Multimode Fiber
DVI
Extron
DFX 100 Rx
Receiver
PC
DFX 100 Rx
R
POWE
12
X
V
-
-
A
MA
T
INPU
OUTPUT
DVI
Flat Panel Display
Extron Headquarters
+800.633.9876 Inside USA/Canada Only
Extron Europe
+800.3987.6673
Inside Europe Only
Extron Asia
+800.7339.8766
Inside Asia Only
Extron Japan
+81.3.3511.7655
FAX:
Extron China
+4000.EXTRON
+4000.398766
Inside China Only
+86.21.3760.1568
FAX:
Extron India
1800.3070.3777
Inside India Only
+91.80.3055.3777
FAX:
+91.80.3055.3737
Extron Korea
Extron USA - West
+1.714.491.1500
Extron USA - East
+1.919.850.1000
+81.3.3511.7656
+31.33.453.4040
+65.6383.4400
Extron Middle East
+971.4.299.1800
FAX:
FAX:
+1.714.491.1517
FAX:
+31.33.453.4050
FAX:
+65.6383.4664
+86.21.3760.1566
+1.919.850.1001
+82.2.3444.1571
FAX: +82.2.3444.1575
+971.4.299.1880
68-2149-50 Rev A 04 13
Download from Www.Somanuals.com. All Manuals Search And Download.
|