Speed Dome
EPTZ1000
USER MANUAL
Date: Mar 2009
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5.3. Corner mount .................................................................................2-22
2.5.4. Multi-Function Keyboard Controller ...........................................2-22
3.
EPTZ1000CAMERA SETUP MENU...............................3-23
3.1. Structure of the Setup Menu.........................................................................3-23
3.1.1. Camera Setup Menu.......................................................................3-24
4.
EPTZ1000FUNCTION SETUP AND OPERATION.........4-30
4.1. Manual Control Mode....................................................................................4-30
4.2. Auto Pan Mode ..............................................................................................4-30
4.3. Position Setting.............................................................................................4-31
4.4. Tour Mode ......................................................................................................4-32
4.5. Alarm Link to a Position/Tour.......................................................................4-33
4.6. Other operations ...........................................................................................4-34
1-2
Download from Www.Somanuals.com. All Manuals Search And Download.
1. EPTZ1000OVERVIEW
1.1. Introduction
EPTZ1000, an intelligent high-speed dome camera is ready to secure your property
with its omni-directional and exact monitoring. An 18X optical and 12X digital zoom
combining with a high-performance chip makes captured images clear and vivid. The
other powerful camera functions this type of speed dome equips with:
¾
¾
¾
¾
PAL / NTSC image format suppose.
Auto and fast focus increases the searching speed and precision.
Auto Iris adjusts the monitoring image to the best brightness.
White Balance function makes the shades of color more natural in different
light conditions.
¾
¾
BLC (Backlight Compensation) function makes objects clear in a high
illumination background.
Color / B&W images auto switching to enhance the sensitivity in a low light
condition or at night.
Furthermore, the micro control unit enables camera a nimble and exact movement
from minimal 0.01°/sec to maximal 360°/sec. It can go to every preset position in 1
second. It also has other advantages such as:
¾
¾
¾
192 preset positions are available.
16 cruise tours can be set, and each tour contains up to 16 positions.
Up to256 speed domes can be supported on a RS485 bus when all speed
domes are controlled by multi-function keyboard controller.
Auto heater and fan to fit all kinds of temperature.
¾
¾
Provide 4 alarm inputs and 1 alarm output.
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
All of the features make the intelligent high-speed dome camera works for a wide
range and demanding application such as banks, airports, stations, casinos, streets
of cities, intelligent buildings, and etc.
1-4
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2. Specifications
Pickup Device
Video Format
Scanning System
1/4'' SONY Type EXview HAD CCD
NTSC or PAL
NTSC: 525 TV lines, 60 fields/sec
PAL: 625 TV lines, 50 fields/sec
Picture Elements
Horizontal Resolution
Sensitivity
768 x 494 ( NTSC ) , 752 x 582 ( PAL )
480 TVL
0.7 Lux/F=1.4
S/N Ratio (AGC OFF)
Electronic Shutter
Digital Slow Shutter
Shutter Selection
Lens Type
Over 50dB
1~1/10,000 (s)
Yes
Yes
18x optical zoom , f=4.1 mm (wide) to 73.8mm (tele) , F1.4 to
F3.0
216x max (18x Optical and 12x Digital Zoom )
Yes
Zoom Ratio
Day/Night
Black Light Comp.
Auto Gain Control
White Balance
Video Output
Sync. Mode
ON/OFF
Auto
Auto/Indoor/Outdoor
BNC 1.0Vp-p , 75ohm
Line Lock/Internal Sync
24VAC
Power Source
Power Consumption
Operating Temperature
Focus Control
Horizontal Rotation
Speed
18W; 70W with heater
-40°C~50°C ; -40°F~122°F
One push/Auto/Manual
0.1°/s~360°/s (1-239 grade shift gears)
Horizontal Rotation
Range
360° unlimited rotation
Tilt Rotation Range
Auto Flip
90° pendulum motion
Rotates 180° when camera tilts to the vertical position
Control speed auto-adjusted according to zoom length changing
Auto Zoom Speed
Control
Auto Pan, 2 Points
Scanning
Can set freely
Auto Pan Speed
Dwell Time (2 points)
1~239 grades available
1~239 second available
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preset Positions
Running to Position
Speed
192 positions
1－239 grade available,0.1º/s - 360º/s
Dwell Time at Preset
Position
1~239 second available
Tour
16 groups
Tour Point per Group
Fan & Heater
16 preset positions
Fan & Heater auto starts
Position Accuracy
Alarm
±0.1°
4 in 1 out with tour/position auto triggering
Yes
Built-in Menu for
Functions
Communication
Communication Speed
Built-in Protocols
Address Editable
Speed Dome Address
Manual Pan/tilt speed
Weatherproof Ratings
Dimensions
RS-485
1200/2400/4800/9600 bps
Auto, EVF, Plus-D, A-Type, Pelco-D, Pelco-P
Yes (through DIP switch)
0-255
Pan: 0.1º ~ 180º/s
Tilt: 0.1º ~ 180º/s
IP66
218.5mm (W) x 267.5mm (H) /
8.6" (W) x 10.5" (H)
4.2kg/9.25lbs
Weight
Certifications
CE ; FCC
1-6
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3. Feature
1.3.1. Hardware Overview
EPTZ1000
Wall Mount Bracket
M5 Bolt (Hex) x3
Base PCB board
Control board
Housing
Connection Bus
Power Cable
BNC Cable
Inner Housing
M3 Bolt x3
RS485 Cable
Mechanical Part
Camera Module
Bulb
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
1.3.2. Base Board
The base board that is on the bottom of the housing connects to power cable, video cable,
control cable, alarm cable, fan and heater (fan and heater are for EPTZ1000 only). In
order to connect to cables, the board needs to be taken off, and put back after finishing
connecting to all cables. The connectors of cable names are marked on the board in white
text. The details of the alarm connector (JP5) are shown on the APPENDIX A.
For EPTZ1000, JP1, JP3 and JP6 that are two-pin connectors on the base board need to
be taken off during installation. JP1 and JP3 are connectors for heater, and they can be
switched. JP6 is a fan controller connector that turns on/off of the fan. The 3 cables are too
short to be connected to a wrong connector when putting them back.
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
JP4
JP6
JP3
JP1
EPTZ1000 Baseboard
1.3.3. EPTZ1000Control Board
The PCB board with two dipswitches is the control board of speed dome. The two
switches are used to set address, protocol, Baud Rate, video format and terminator
resistance.
1-8
Download from Www.Somanuals.com. All Manuals Search And Download.
CPU
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
SW1
1.4. EPTZ1000Connection
110V AC
24V AC
POWER
24V AC / 3.5 A
Adapter
BNC
1.0Vpp ± 0.2V, 75
Video Out
Ω
RS485 Tx(+)
RS485 Tx(-)
RS485 Control Line
EPTZ1000DN/
EPTZ500DN
Alarm 1
Alarm 2
Alarm 3
Alarm 4
4 ALARM INPUTS
GROUND
ALARM OUTPUTS
N.C.
N.O.
COM
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
1.5. EPTZ1000 Quick Operation Guide
EPTZ1000and EKB500 (Keyboard) can work together by using factory default
setting. You just need to connect cables by following the steps:
1. Connect the RS485 cable to EPTZ1000and a Keyboard (EKB500).
2. Connect a video cable from EPTZ1000to a monitor.
3. Connect the power to the EPTZ1000and a Keyboard (EKB500) .
After the speed dome finishes the self-test mode, you can start to operate the speed
dome via the keyboard.
To operate the EPTZ1000:
UP
IRIS
+
Focus
F.
Zoom
In
Zoom OUT
Zoom IN
LEFT
RIGHT
-
N.
Out
DOWN
1. Shift the Joystick up/down or right/left to view from camera.
2. Turn the top of the Joystick to zoom in/out.
3. Press Zoom In/Out, Focus F. /N. and IRIS +/- function keys to operate the
EPTZ1000.
1-10
Download from Www.Somanuals.com. All Manuals Search And Download.
2. EPTZ1000INSTALLATION
2.1. Packing List
There are 3 boxes that are housing, bulb and mechanical part with a camera module, one
wall mount bracket, one power adapter and one accessory packet in the package. The
detail accessories list below:
¾
¾
¾
¾
¾
¾
Housing x1
Bulb x1
Mechanical part with a camera module x1
Wall mount bracket x1
Adapter x1
Accessory packet
— Glove x2
— M5 Hex Allen wrench x1
— Pin connector x1
— M5 screw (Hex) x3 for wall mount bracket fixing
— M3 screw x3 for bulb fixing
— Anchor nut and wall mount screw x4
2.2. Cable Needed
- Power Cable
An adapter with 24V AC/3.5A output provides the power to the speed dome. An
extension power line may be needed.
Note: The input AC voltage range of an adapter depends on different area.
Please make sure the voltage range before installing.
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
- Video Cable
A BNC cable is used for connecting a speed dome to a DVR or a monitor. An amplifier
may be needed if the video cable is too long.
- Control Cable
Basically, EPTZ1000uses a differential pair to connect to other devices by cascading.
A cable that has low signal decline can be used as a control cable.
- Alarm Cable
An alarm cable is not included in the packing list. A suitable wire can be used as an
alarm cable.
2.3. Initial Setup
Initial setup includes dome address, communication protocol, transmission speed, video
format, and terminator resistance settings. All of the settings should be confirmed before
the dome is installed. The control-related setting that is address, communication protocol
and transmission speed have to be set consistently with the control device such as a
keyboard or a DVR.
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-12
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.1. Address Setting
The address code of the EPTZ1000should be set to correspond properly with a control
device to control multiple dome cameras. The address codes are made up by the
dipswitch SW1 (8 bits) on the PCB board. The 8 bits dipswitch indicates the binary
coded of the address, and there are 256 addresses can be selected (0 ~ 255, 28 = 256).
It also means that there up to 256 dome cameras can cascade on the RS485 bus. The
dipswitch setting and the indicated address are represented in the following chart.
Note: The factory default address is 1.
Notice: Please make sure the power is off before setting, and restart the speed dome
to enable a new value after changing.
CPU
SW2
ID1
ID2
ID3
ID4
ID5
ID6
ID7
ID8
SW1
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Address
Switch
Address
Sw
i
tch
Address
Sw
i
t
ch
Addre
ss
ON
ON
ON
ON
0
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
1
1
1
1
1
ON
ON
ON
ON
2
1
1
1
1
ON
ON
ON
ON
3
1
1
1
1
ON
ON
ON
ON
4
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
1
1
1
1
ON
ON
ON
ON
5
1
1
1
1
ON
ON
ON
ON
6
1
1
1
1
ON
ON
ON
ON
7
1
1
1
1
ON
ON
ON
ON
8
1
1
1
1
ON
ON
ON
ON
9
1
1
1
1
ON
ON
ON
ON
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
2-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Switch
Address
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
Switch
Address
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
Switch
Address
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
Switch
Address
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
ON
ON
ON
ON
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
1
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
7
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
8
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
ON
ON
ON
ON
1
1
1
1
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.2. Communication Protocol Setting
The 1st, 2nd and 3rd bits of the SW2 are used to set communication protocol. The factory
default protocol is EVF.
EVF - 1
PELCO-D
PELCO-P
TYPE-A
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
Set all of protocol switches to ON; the EPTZ1000will enter a self-test mode.
2.3.3. Transmission Speed Setting (Baud Rate Setting)
The 4th and 5th bits of the SW2 on the PCB board are used to set the Baud Rate. The
default baud rate setting is 9600.
9600 BPS 4800 BPS 2400 BPS 1200 BPS
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-16
Download from Www.Somanuals.com. All Manuals Search And Download.
2.3.4. Video Format Setting
The 6th bits of the SW2 on the PCB board are used to set the video format. The default
video format depends on the factory setting. Please do not change it.
NTSC
PAL
SW2
Protocol
Baud Rate
PAL / NTSC
Maching Resistance
Notice: Please make sure the power is off before setting, and restart the speed dome to
enable a new value after changing.
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
2.4. Rack and Speed Dome Installation
2.4.1. Installation Requirements
1. Installation should be handled by a qualified service agent and should comply with
all local regulations. Service personnel should expect potential problems such as
surface strength, surface material, falling objects, outer breaches, building vibration
or other similar conditions.
2. Check for all necessary materials, and ensure if the selected installation location is
suitable for the speed dome.
2.4.2. EPTZ1000 Dome Camera Wall Mount Installation
Notice: Installation location that is a wall, a pole or a ceiling needs to support above five
times the total weight of the camera assembly (about 16 kg) to avoid shaken images, and
dropping.
1. Set wall mount bracket on the wall. Mark the center of the holes on the wall against
the bracket holes. Use a drill to make 4 holes that can be nailed 4 0.25” X 1.25”
screws at the marks.
Notice: The length of the screws depends on the surface material. The mentioned screws
are used in the normal concrete surface.
2-18
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Thread the cable through the hole in the wall mount bracket, and screw in 4 M8
nuts for mounting the bracket.
3. Take off the housing from the packing, and take off the baseboard (4 bolts on it.)
inside the housing. Thread the cable through the top of the housing. Fix the
housing on the wall mount bracket, and screw in 3 M5 bolts (Hex) on the top of the
bracket with the attached Hex Allen wrench to fix the housing.
M5 Bolt
Hex Allen wrench
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
AC24
JP4
JP6
JP3
JP1
4. Connect the cable connectors to the nodes on the baseboard, and then fix the
baseboard in the housing by screwing 4 bolts on it.
Notice: Please notice the polarity of control line. The EPTZ1000 will not work if the
polarity of control line is mis-connected.
2-19
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Align the two screw holes on the bottom of mechanical part to the two bolts on the
base of the housing, and twist the mechanical part clockwise a little bit in order to
engage it with the base. Screw the two bolts on the base, and then connect and fix
the connection bus to the PCB board on the mechanical part.
Notice: The camera module on the mechanical part is very sensitive. Please be careful
when installing this part.
6. Remove the lens protection cover before installing the bulb. Align the 3 bolt holes
into the 3 housing bolt holes, and screw thee M3 bolts with the attached small
screw driver to fix the bulb.
M3 Blot
M3 Blot
GLOVE
2-20
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice: In order to protect the bulb from dirt and scrape, please put on the gloves before
installing the bulb.
7. Turn on the power, and start to operate the EPTZ1000.
Note: When turning on the power, the EPTZ1000 will enter self-inspection mode, and carry
out a self-testing program. After finishing self-inspection, you can start to operate
the EPTZ1000.
2-21
Download from Www.Somanuals.com. All Manuals Search And Download.
2.5. Separately Sold Accessories
2.5.1. Pole mount
The pole mount is used for installing a speed dome on the ceiling
indoors or outdoors.
The extension poles are available for the pole mount.
2.5.2. Pole adapter
The pole adapter is used for installing a wall mount bracket to a
pole indoors or outdoors.
2.5.3. Corner mount
The corner mounts are used for installing a wall mount bracket to a
270° corner of walls indoors or outdoors.
2.5.4. Multi-Function Keyboard Controller
Multi-Function System Controller
Capable of controlling PTZ, DVR and Monitor
3D Joystick control of PTZ function
2-22
Download from Www.Somanuals.com. All Manuals Search And Download.
3. EPTZ1000CAMERA SETUP MENU
In this section, setup and operation guide of EPTZ1000will be introduced. There are
25 items of the setting menu. However, there is only one line on the line display, so
using some combination keys to operate is necessary.
3.1. Structure of the Setup Menu
Press MENU to enter camera setup menu.
Press Shift + Joystick up/down to change subentries, and right/left to change the setting.
Items
Option
CAM ID
-----------------
DZOOM
FOCUS
IRIS
OFF / ON
AUTO / MAN / ONE PUSH
AUTO / MAN
NEGATIVE
OFF / ON
OFF / AUTO
S.SHUTTER
COLOR
OFF / ON
OFF / ON
DISPLAY
BACKLIGHT
WBC MODE
TITLE DISPLAY
AUTO FLIP
ALM-IN1 SET
ALM-IN2 SET
ALM-IN3 SET
ALM-IN4 SET
ALM-IN PRIO
ALM-OUT
OFF / ON
AUTO / INDOOR / OUTDOOR
OFF / ON
OFF / ON
NIGHT N.O./ NIGHT N.C./ N.O. / N.C. / OFF
N.O. / N.C. / OFF
N.O. / N.C. / OFF
N.O. / N.C. / OFF
1234 / 2341 / 3421 / 4123
OFF/ LATCH / 3 /5 /10 /20 /30 /60 SEC
OFF/ LIMIT ENT
MOTION
ENT
TOUR
X CNT
0000000000
0000000000
Y CNT
0000000000
PO CNT
LOAD DEFAULT
EXIT MENU
-----------------
-----------------
3-23
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1.1. Camera Setup Menu
Press MENU to enter camera setup menu.
Press Shift + Joystick up/down to change subentries, and right/left to change the setting.
1. CAM ID： The name assigned to the camera.
2. DZOOM： Digital zoom enable or disable.
ON: Enable a digital zoom.
OFF: Disable a digital zoom.
3. FOCUS： Focus type, auto focus and manual focus are available.
AUTO: Auto focus is enabled.
MAN: Manual focus is enabled.
ONE PUSH: Enable the one push trigger focus mode. The focus lens holds the same
position until the next trigger command is received. This function prevents
the wrong focus in dark. This option is the default value.
4. IRIS： IRIS type, auto iris and manual IRIS are available.
AUTO: Auto IRIS is enabled.
MAN: Manual IRIS is enabled.
5. NEGATIVE： Negative image.
ON: Enable a negative image.
OFF: Disable a negative image.
3-24
Download from Www.Somanuals.com. All Manuals Search And Download.
6. S.SHUTTER : (this function is only available for EPTZ1000)
OFF: Disable auto slow shutter.
AUTO: Auto Slow electrical shutter. In order to enhance the view in the low lux
environment, slow shutter allows more light go through the shutter.
7. COLOR： Color display.
ON: Enable a color display.
OFF: Disable a color display, and show a B&W display.
8. DISPLAY： Display system information and status.
ON: To display the system information and status on the screen.
OFF: Not to display the system information and status on the screen.
9. BACKLIGHT： Backlight compensation.
ON: Enable backlight compensation.
OFF: Disable backlight compensation.
10. WBC MODE： White balance mode.
AUTO: Auto white balance mode.
INDOOR: Indoor white balance mode.
OUTDOOR: Outdoor white balance mode.
11. TITLE DISPLAY : Display the title.
ON: Enable title display.
OFF: Disable title display.
3-25
Download from Www.Somanuals.com. All Manuals Search And Download.
12. AUTO FLIP： Flip the camera when it tilts to the 90° end.
ON: Enable auto flip.
OFF: Disable auto flip.
13. ALM-IN1： The status of input alarm 1.
NIGHT N.O.: Dome turns to “Night mode” if external contact open. Dome turns to “Day
mode” if external contact closed.
NIGHT N.C.: Dome turns to “Night mode” if external contact closed. Dome turns to “Day
mode” if external contact open.
N.O.: Enable a normal open alarm input.
N.C.: Enable a normal close alarm input.
OFF: Disable alarm input.
14. ALM-IN2： The status of input alarm 2.
N.O.: Enable a normal open alarm input.
N.C.: Enable a normal close alarm input.
OFF: Disable alarm input.
15. ALM-IN3： The status of input alarm 3.
N.O.: Enable a normal open alarm input.
N.C.: Enable a normal close alarm input.
OFF: Disable alarm input.
16. ALM-IN4： The status of input alarm 4.
N.O.: Enable a normal open alarm input.
N.C.: Enable a normal close alarm input.
3-26
Download from Www.Somanuals.com. All Manuals Search And Download.
OFF: Disable alarm input.
17. ALM-IN PRIO： The priority of alarms.
1234: The alarm priority is 1>2>3>4.
2341: The alarm priority is 2>3>4>1.
3412: The alarm priority is 3>4>1>2.
4123: The alarm priority is 4>1>2>3.
18. ALM-OUT： Duration time of the alarm output.
OFF: Disable alarm output.
3 / 5 / 10 / 20 / 30 / 60 SEC: The duration of the alarm output sustains in seconds.
LATCH: The alarm output will not stop until there is any operation on keyboard.
19. MOTION: This is used to set a limitation for Auto Pan function. When Motion is ON,
you can use Auto Pan function simply by pressing “Shift“+ “A.Pan “of the keyboard
(according to A. Pan position you have set).
OFF: Motion limitation function is disabled.
LIMIT: Press “Enter” first.
The message NOW LIMIT OFF shows up, press “Enter” again.
The message CHANGE ON shows up, press “Enter” to change.
To change the value back to OFF, simply follow the same steps again.
If you need to reset, press “IRIS –“ of the keyboard to exit.
20. TOUR：Tour setting or tour run option. Press “Enter” first to enter tour mode.
Shift joystick to right and left (< >), shift SET or RUN option. (Shift the joystick up for
returning to previous setting). Press “Enter” to confirm.
3-27
Download from Www.Somanuals.com. All Manuals Search And Download.
For Tour setting: Shift joystick to right and left (< >) for changing Set Numeral
(T01A~T16A), then press “Enter” to confirm.
Shift joystick to right and left for selecting PRE Numeral (position) from 01~99, then press
“Enter” to confirm.
Shift joystick up and down to adjust DWL (dwell) time from 0~99 sec, then press “Enter” to
confirm.
Shift joystick to right and left for adjusting speed (5~235, with an interval of 5), then press
“Enter” to confirm.
For Tour Run:
Shift joystick to right and left for selecting RUN NUM (T01A~T16A) of the tour that you
previously set. Press “Enter” to start running the tour.
Alternatively, you could run the tour without entering MENU. Press “Position + 97” to run
the tour that you have previously set, please be informed that this function is only valid for
T01A.
If you need to reset, press “IRIS –“ of the keyboard to exit.
21. X CNT： X-axis counter. This counter counts the x axis movement, and 1 is counted
when the speed dome pans 360°.
22. Y CNT： Y-axis counter. This counter counts the y axis movement, and 1 is counted
when the speed dome tilts 180°.
23. PO CNT： Position counter. This counter counts the go-position times, 1 is counted
when speed dome goes to a position once.
24. LOAD DEFAULT： Load default setting.
3-28
Download from Www.Somanuals.com. All Manuals Search And Download.
Select this item, and then press “Enter” to load default setting.
Press “Clr” + “Menu” whenever you want to quit menu setting.
25. EXIT : To exit.
Select this item, and then press “Enter” to quit setting.
Press “Clr” + “Menu” whenever you want to quit menu setting.
3-29
Download from Www.Somanuals.com. All Manuals Search And Download.
4. EPTZ1000FUNCTION SETUP AND OPERATION
4.1. Manual Control Mode
¾
Manual control: Shift Joystick Up/Down/Left/Right, and turn it
Clockwise/Counterclockwise to control speed dome.
Use the control keys which are Zoom, Focus and IRIS function keys on the
keyboard to zoom In/Out, focus N (near)/F (Far), or IRIS +/-.
Note: Zoom In/Out control keys will be disabled when entering to OSD menu
mode.
¾
HOME Mode: The camera view will go back to the home position when there is no
keyboard operation in a specific time. The home position and the specific time can
be set by press Set + Home.
If you set the time to 0 minute, then the camera will go back to home if there is no
keyboard operation in 5 seconds. This is the minimum no action time for HOME
mode.
Note: If "HOME" function is enabled, dome will go to home immediately after
powering on.
4.2. Auto Pan Mode
¾ Two point auto pan: Press A.Pan to enter the auto pan mode, and then the
system will ask you to enter the auto pan speed (1~239). Press Enter to start auto
pan.
In order to set the two points, press Set + A.Pan, and then enter the dwell time
(1~239 seconds) of each point. EPTZ3000 begins to pan from point A to point B
clockwise.
¾
360° auto pan: Press Shift + A.Pan to enter the 360° auto pan. System will ask you
4-30
Download from Www.Somanuals.com. All Manuals Search And Download.
to enter 360° auto pan speed (1~239). The camera will turn 360° automatically, but
not tilt.
4.3. Position Setting
¾
Focus on a preset position: Press the number key, and then press Position to
focus on the number of preset position; or you can press Position, then enter the
preset position number, and then press Enter to focus on the number of preset
position.
¾
Preset a position: Shift the Joystick to the position you would like to preset, and
then press Shift + Position. The system will ask you to enter the preset position
number (1~192), and then press Enter to save the position. There are up to 192
positions can be preset.
Three specific preset positions can be set as follows:
92 => Set Left Limit Stop (A position)
93 => Set Right Limit Stop (B position)
95 => Enter Menu mode (Use keyboard control keys to control OSD items; Focus F.
to go downward, Focus N. to go upward. IRIS + go to previous setting and IRIS –
to exit).
You can directly go to the following specific preset positions:
33 => Rotation of 180 degree
34 => Go to Home position (if Home Position is set by EVF Keyboard)
96 => Stop Scan
97 => Start running tour
98 => Frame scan (60 degree / step)
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting
speed.
4-31
Download from Www.Somanuals.com. All Manuals Search And Download.
Dwell time: default is 2 sec; It can be changed by EVF Keyboard Set + A.Pan
setting dwell time of A pos or B pos.
99 => Auto scan (360 degree)
Default speed is 32. It can be changed by EVF Keyboard (Shift + A.Pan setting
speed).
For EPTZ1000, We can even set camera’s ICR Day/Night function with RS-485
command via keyboard. How to do this? Press Position + 88 to link to Day mode or
Position + 89 to link to Night mode, “ICR AUTO” message will be shown on the
right-bottom part of the screen. If OSD Day/Night ICR mode is “AUTO”, it cannot be
controlled by preset position setting.
¾
Set the parameter of a preset position: Press Set + Position to set the parameter
of a preset position. You can set the going-to speed (1~239), dwell time (1~239
seconds), and the title of the position. Shift the joystick Right/Left to change bits,
and shift the Joystick Up/Down to change the alphanumeric characteristic. The
available alphanumeric characteristics are 0~9, A~Z, &, ?, !, :, ‘, ., ,, /, -, and a
space.
¾
Delete a preset position: Press Clr + Position to delete a preset position. The
system will ask you to enter the position number that you would like to delete, and
then press Enter.
4.4. Tour Mode
In the tour mode, you can set a tour for viewing. There are 16 tours can be set, and 16
preset positions in a tour.
4-32
Download from Www.Somanuals.com. All Manuals Search And Download.
¾
One-way tour Mode: Press Tour to enter the tour mode. The system will ask you
to enter the tour number you would like to run, and starts the tour after pressing
Enter. To preset a tour before running it is necessary.
Preset a one-way tour: Press Set + Tour to preset a one-way tour. The system will
ask you to enter preset position numbers (The positions need to be preset). After
finish entering all positions, press Stop to quit, and then press Enter to save the
tour.
¾
To-and-fro tour mode: Press Shift + Tour to run a to-and-fro tour. The system will
ask you to enter the tour number you would like to run, and starts the tour after
pressing Enter. To preset a tour before running it is necessary.
Note 1: The difference between the One-way tour mode and To-and-fro tour mode is their
return modes. For example: There is a tour with 3 preset positions 1, 2 and 3. The camera
runs 1→2→3→1→2→3 in the One-way tour mode, and 1→2→3→2→1 in the To-and-fro
tour mode.
Note 2: You could set a pattern tour. Press Set + Tour, and input 0, press Enter. Sway the
joystick to record the entire tour. Press Stop to stop recording tour. To view this pattern
tour, simply press Tour, and input tour number 0.
4.5. Alarm Link to a Position/Tour
The EPTZ1000has 4 alarm inputs that can be set to link to a position or a tour when an
alarm is triggered.
¾
Set an alarm link:
Press F1 to set an alarm link. Enter the alarm number, and then press Enter.
Switch the Joystick up/down to select a position or a tour, enter a position or tour
number, and then press Enter to confirm the alarm link setting.
4-33
Download from Www.Somanuals.com. All Manuals Search And Download.
If you set the position number to 99, the dome will do a 360 degree auto scan or AB
two point pan if limit is ON. If you set the position number to 98, the dome will do a
frame scan.
¾
Delete an alarm link:
Press Clr + F1 to delete a link of alarm to position/tour.
Note 1: After alarm output signal is terminated, the speed dome will resume action
or return to its original position.
Note 2: After powering on the speed dome, it will detect alarm status automatically.
4.6. Other operations
The EPTZ1000can work with a DVR that has PTZ control functions, and a
matching protocol. The available control functions depend on different DVRs.
The EPTZ1000can work with a keyboard that has PTZ control functions, and a
matching protocol. The available control functions depend on different keyboards.
4-34
Download from Www.Somanuals.com. All Manuals Search And Download.
APPENDIX A: The Alarm I/O Connection
There are 4 alarm inputs and 1 alarm output available. The alarm I/O connector that is
marked as JP5 is a nine-pin connector. It is located on the PCB board of the housing.
JP5
1 ~ 9
JP5
RELAY
RELAY
JP5
Video +
Video -
RS485 +
RS485 -
AC24
JP5
AC24
JP4
JP6
JP3
JP1
1 ~ 9
EPTZ1000 base board
Pin #
Function
Alarm Input 4
Ground
1
2
3
4
5
6
7
8
9
Alarm Input 3
Alarm Input 2
Ground
Alarm Input 1
Normal Open (N.O.)
Common (COM)
Normal Close (N.C.)
4-35
Download from Www.Somanuals.com. All Manuals Search And Download.
EverFocus Electronics Corp.
Europe Office:
Head Office:
Albert-Einstein-Strasse 1
D-46446 Emmerich, Germany
TEL: 49-2822-9394-0
12F, No.79 Sec. 1 Shin-Tai Wu Road,
Hsi-Chih, Taipei, Taiwan
TEL: +886-2-26982334
FAX: +886-2-26982380
China Beijing Office:
Room B-05D-1, KESHI PLAZA , Shangdi Information
USA L.A. Office:
Industry Base,
1801 Highland Ave. Unit A
Duarte, CA 91010, U.S.A.
TEL: +1-626-844-8888
FAX: +1-626-844-8838
Haidian District, Beijing China
100085
TEL: +86-10-62973336/37/38/39
FAX: +86-10-62971423
USA N.Y. Office:
Japan Office:
415 Oser Avenue Unit S
Hauppauge, NY 11788
Tel: 631-436-5070
1809 WBG MARIBU East 18F,
2-6 Nakase.Mihama-ku.
Chiba city 261-7118, Japan
TEL : +81-43-212-8188
FAX : +81-43-297-0081
Fax: 631-436-5027
Your EverFocus product is designed and
manufactured with high quality materials and
components which can be recycled and reused.
This symbol means that electrical and electronic
equipment, at their end-of-life, should be
disposed of separately from your household
waste.
Please, dispose of this equipment at your local
community waste collection/recycling centre.
In the European Union there are separate
collection systems for used electrical and
electronic product.
Please, help us to conserve the environment we
live in!
Ihr EverFocus Produkt wurde entwickelt und
hergestellt mit qualitativ hochwertigen Materialien
und Komponenten, die recycelt und wieder
verwendet werden können.
Dieses Symbol bedeutet, dass elektrische und
elektronische Geräte am Ende ihrer Nutzungsdauer
vom Hausmüll getrennt entsorgt werden sollen.
Bitte entsorgen Sie dieses Gerät bei Ihrer örtlichen
kommunalen Sammelstelle oder im Recycling
Centre.
Helfen Sie uns bitte, die Umwelt zu erhalten, in der
wir leben!
P/N: MW01G0040B Ver. C
4-36
Download from Www.Somanuals.com. All Manuals Search And Download.
|