Euro Pro Food Processor EKP110 User Manual

Food Processing Center  
Use and Care Instruction Manual  
Model EKP110  
Read and Understand Instruction Manual Before Use  
EURO-PRO Operating LLC  
Boston, MA, 02465  
1 (800) 798-7398  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Congratulations! As the owner of a new Food Processing Center, you are about to use a very  
versatile and powerful kitchen appliance that will quickly become an indispensable item in  
your kitchen. Euro-Pro products are engineered to meet the highest quality standards and are  
designed to offer the ultimate in ease of operation and convenience.  
IMPORTANT INFORMATION  
Please read all the following instructions carefully.  
IMPORTANT  
For your protection, this appliance has a double safety switch so that it cannot run unless the  
food processor lid (13) is locked in place and either the safety cover (2) or the blender (8) is  
also locked in place.  
PLEASE NOTE  
A. To remove safety cover (2) or blender (8), you must first remove the processor lid (13).  
B. To operate the food processor, the safety cover (2) must be properly locked in place.  
C. To operate the blender (8), processor lid (13) must be locked in place.  
D. When operating blender (8) make sure that all attachments are first removed from the food  
processor bowl (11).  
E. Do not attempt to use both blender and food processor at the same time.  
F. Do not attempt to by-pass the cover (2) safety interlock mechanism or the main lid  
interlock.  
To remove the  
blender, you must  
first unlock and  
remove the  
processor lid (A).  
Then unlock and  
remove the  
WARNING:  
Always remove  
the blender and fit  
the safety cover  
(2) into the  
processor body  
when using the  
processor.  
blender (B) by  
twisting clockwise.  
IMPORTANT: Remove protective blade  
cover(s) before use. Protective blade  
covers to only be used for storage.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Food Processing Center  
120V., 60 Hz., 600 Watts  
MAIN COMPONENTS AND ACCESSORIES  
1. Processor Body  
2. Safety Cover  
3. Safety Cover/Blender  
Location  
4. On/Off Speed Control Dial  
5. Pulse Button  
6. Drive Shaft  
7. Storage Compartment  
8. Blender  
24. Chopping Blade  
Protective Cover  
25. Plastic Dough Blade  
26. Whisk Head  
12. Spindle  
13. Processor Lid  
14. Food Pusher  
15. Storage Dome  
16. Spatula  
27. Whisk Beater  
28. Juice Extractor/Filter  
29. Juice Extractor Lid  
30. Juice Extractor Pusher  
31. Citrus Juice Filter  
32. Juice Reamer  
17. Blade Holder  
18. Fine Shredding Blade  
19. Coarse Shredding Blade  
20. Coarse Slicing Blade  
21. Fine Slicing Blade  
22. French Fry Blade  
23. Chopping Blade  
9. Blender Lid  
10. Measuring Cap  
11. Processor Bowl  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
STORAGE  
The food processing center  
3. Place the protective cover  
(24) onto the chopping  
is designed so that most of  
the attachments can be  
stored on-board.  
blade (23) and place into  
storage compartment. The  
highest part of the blade  
should be placed at the  
back of the compartment.  
Storage Compartment  
1. Lift the lid of the storage  
compartment (7).  
2. Place whisk head (26) in  
storage compartment as  
shown.  
4. Push shaft of whisk beater  
(27) firmly into the hole.  
5. Close the lid of the storage  
compartment.  
Storage Dome  
1. Fit the processor bowl (11)  
& processor lid (13) onto  
the processor base.  
2. Place the the storage  
dome (15) onto the  
processor lid.  
Spatula Storage  
Slide the spatula (16) into the  
slot provided on the side of  
the processor body (1).  
3. Add the spindle (12) into  
the circular hole in the  
storage dome.  
4. Place the plastic blade  
holder (17) & French fry  
blade(22) into the two  
longer slots.  
Cord Storage  
The power supply cord can  
be stored by feeding it into  
the opening at the back of  
the food processor body.  
5. Add the slicing blades  
(20, 21) & the shredding  
blades (18, 19) into their  
slots in the storage dome.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
INSTRUCTIONS FOR USE  
Operating Controls  
The processor and blender  
control dials have settings  
as follows:  
Off/1-9 + Max  
Pulse  
The speed can be adjusted  
while the processor or  
blender is in use.  
5. Fit the spindle (12) onto the  
motor shaft (6) and the  
appropriate attachments  
onto the spindle. Refer to  
the following section  
“Fitting & Using the Tools”.  
WARNING  
TO REDUCE THE RISK OF  
INJURY, NEVER PLACE  
THE CUTTING BLADE ON  
THE BASE WITHOUT FIRST  
PUTTING THE BOWL  
PROPERLY IN PLACE.  
Using the pulse button (5)  
allows greater control over  
the texture of the food  
processed. It is only  
intended to be used for  
short “bursts” of processing  
or blending.  
6. Holding the processor lid  
(13) by the feed tube, fit the  
lid by rotating  
counterclockwise.  
Operating the Food Processor  
7. Ensure that the lid tab has  
“clicked” into place and the  
arrows are lined up.  
Setting up  
1. CAUTION: Make sure  
that the unit is unplugged  
from power source and  
operation button is on  
“OFF” before inserting or  
removing any  
8. Plug the processor and  
switch on. If the processor  
does not come on, check  
that the machine cover and  
processor lid are both  
correctly fitted.  
attachments and before  
cleaning.  
FOR SAFETY, ALWAYS  
USE THE FOOD PUSHER  
WHEN PUTTING FOOD  
INTO THE FEEDER TUBE.  
NEVER FEED BY HAND.  
2. Fit the safety cover (2)  
into the food processor  
body and turn  
counterclockwise firmly  
until it “clicks” into place  
(the arrows will now be  
lined up). IMPORTANT  
THE FOOD PROCESSOR  
WILL NOT OPERATE  
WITHOUT THE SAFETY  
COVER IN PLACE.  
WARNING:  
ALWAYS REMOVE THE  
BLENDER AND FIT THE  
SAFETY COVER (2) INTO  
THE PROCESSOR BODY  
WHEN USING THE  
PROCESSOR.  
3. Place the processor bowl  
(11) onto the processor  
body (1). There is no need  
to turn the bowl.  
4. When fitted correctly, the  
handle will be to the right of  
the assembly, and the ridge  
on the base of the bowl will  
fit into the slot at the back  
of the processor body.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
FITTING & USING THE TOOLS  
In general, all attachments which are fitted within the processor bowl must be firmly  
attached to the spindle (12). Always adjust the attachments until you are sure that they  
are correctly fitted.  
Chopping Blade (23)  
1. Fit the processor bowl and spindle as detailed previously.  
2. Remove the chopping blade protective cover (24) from the metal chopping blade.  
3. Fit the blade over the spindle and press firmly into place.  
WARNING:  
USE EXTREME CAUTION - BLADES ARE SHARP. ALWAYS HANDLE THE CHOPPING  
BLADE BY ITS CENTRAL PLASTIC HUB.  
4. Place the food into the bowl.  
5. Fit the lid and click into place as detailed in the “Setting Up” Section (page 4).  
6. Insert power cord into electrical wall outlet.  
• Keep hands and utensils away from cutting blades while chopping food to reduce the risk of  
injury to persons or damage to the food chopper. A scraper may be used, but must be used  
only when food processor is not running.  
• Do not leave the appliance unsupervised when it is operating, i.e. when it is “ON”.  
7. Never feed by hand. Always use the food pusher (14) to push food into the food processor  
bowl (11) through the feeder tube.  
8. WARNING: When the processing is completed, unplug, then remove the spindle (12) and  
blade from the bowl before removing the processed food.  
9. AFTER CLEANING, ALWAYS REPLACE THE PROTECTIVE COVER (24) ON THE  
METAL CHOPPING BLADE (23).  
Processing Examples With the Chopping Blade  
The processing times indicated below are approximate and also depend on the quantity of the  
food to be processed and the degree of fineness you require.  
RECOMMENDED  
PRODUCT  
Meat*  
QUANTITY  
OPERATION TIMES  
SPEED  
Max.  
5-6  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
21 oz / 600 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
4 slices  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
20 seconds  
Onions  
Nuts  
8-Max.  
1-8  
Fish*  
Cheese  
Liquids (soups)  
Carrots  
Bread  
1-8  
1-8  
6-8  
40-50 seconds  
40 - 50 seconds  
10 - 30 seconds  
10 seconds  
6-8  
Apples  
24.5 oz / 700 gr.  
Max 4 bundles  
Max 4 cups/1 liter  
8-Max.  
Max.  
8-Max.  
Parsley  
Mayonnaise  
30 seconds  
* Always allow food to cool before placing in the bowl.  
* Remove all bones before processing.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plastic Dough Blade (25)  
CAUTION: Make sure that the unit is unplugged from the power  
source and the operating button is “OFF” before inserting or  
removing attachments.  
1. Fit the processor bowl and spindle as described previously on page 4.  
2. Fit the plastic dough blade over the spindle and press firmly into place.  
3. Place the ingredients into the bowl.  
4. Fit the lid and click into place as described in the “Setting Up” section  
(page 4).  
5. Plug in the processor.  
6. Turn the processor on selecting maximum speed. Maximum capacity  
for processing dough is based on the mixture of 21 oz. (600 g.) of  
flour and 14 oz. (400 g.) of water in order to obtain 2.2 Lbs. (1 kg.) of  
dough.  
7. Remove the blade from the bowl before removing the dough.  
WHEN KNEADING DOUGH, DO NOT OPERATE THE MACHINE  
LONGER THAN 20 SECONDS. AFTERWARDS WAIT AT LEAST 2  
MINUTES BEFORE OPERATING THE MACHINE AGAIN.  
FOR SAFETY, ALWAYS LEAVE THE PUSHER IN PLACE WHILE  
OPERATING THE PROCESSOR.  
Whisk Head (26), Whisk Beater (27)  
CAUTION: Make sure that the unit is unplugged from the power  
source and the operating button is “OFF” before inserting or  
removing attachments.  
1. Fit the processor bowl and spindle as described previously on page 4.  
2. Click the whisk beater (27) into the short extension of the whisk head  
(26).  
3. Place the long extension of the whisking head onto the motor shaft (6).  
4. Add ingredients to the bowl.  
5. Fit the lid and click into place as detailed in the “Setting Up” section  
(page 4).  
6. Plug the processor into the wall outlet.  
7. Turn the processor on selecting maximum speed.  
For your safety, the pusher must stay in its place while operating the  
appliance. Keep hands, hair, clothing as well as spatulas and other  
utensils away from beaters during operation to reduce the risk of injury  
and/or damage to the appliance.  
IMPORTANT WARNING: NEVER USE THE WHISK ATTACHMENT  
FOR DOUGH KNEADING.  
DO NOT IMMERSE THE WHISK HEAD (26) IN ANY LIQUID.  
To clean the whisk beater (27), remove it from the whisk head (26)  
and wash.  
Wipe the whisk head (26) clean with a damp cloth.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Slicing & Shredding Blades  
French Fry Blade (22)  
1. Fit the processor bowl and spindle  
as detailed previously.  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the operating button is “OFF” before  
inserting or removing attachments.  
1. Place the blade of your choice on the  
blade holder (17). Inserting the longer  
tab on the side of the blade first.  
2. Press the other end of the blade until it  
clicks into place.  
3. Fit the processor bowl and spindle as  
detailed on the page 4.  
4. Using the finger holes in the blade  
holder, fit it over the spindle and press  
firmly into place as indicated.  
2. Using the finger holes in the  
french fry blade, fit it over the  
spindle and press firmly into place  
as indicated.  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE  
SHARP.  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
5. Fit the lid and click into place as  
described in the Setting Up section  
(page 4).  
3. Fit the lid and click into place as  
indicated in Setting Up section  
(page 4).  
4. Plug in the processor.  
5. WARNING: USE THE FOOD  
PUSHER (14) TO ADD FOOD  
INTO THE PROCESSOR BOWL  
(11) THROUGH THE FEEDER  
TUBE.  
6. Plug in the processor.  
7. WARNING: USE THE FOOD  
PUSHER (14) TO ADD FOOD INTO  
THE PROCESSOR BOWL (11)  
THROUGH THE FEEDER TUBE.  
Do not overload the bowl. In one  
operation, you can process  
maximum 2.2 Lbs. of food.  
Processing Examples  
For fine slicing: Blade A (21)  
Recommended speed level is between 5-6  
(Cucumbers, raw potatoes, lettuce, carrots)  
For coarse shredding: Blade D (19)  
Recommended speed level is between 5-6  
(Lettuce, carrots, apples)  
For coarse slicing: Blade B (20)  
Recommended speed level is between 5-6  
(Cabbage, carrots, onions)  
For French Fries: Disc (22)  
Recommended speed level is between 5-6  
For fine shredding: Blade C (18)  
Recommended speed level is between 5-6  
(Carrots, cucumbers, cabbage)  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Juice Extractor  
CAUTION: Make sure that the unit is unplugged from the power  
source and the operating button is “OFF” before inserting or  
removing attachments.  
1. Fit the processor bowl as detailed previously (page 4).  
2. Fit the juice extractor/filter (28) into the processor bowl.  
3. Fit the juice extractor lid (29) over the extractor and rotate  
counter clockwise ensuring that the lid tab has clicked into place.  
4. Plug in processor.  
5. Turn speed control to low (use only on low speed).  
6. Use the juice extractor pusher (30) to add fruit into the food tube.  
7. If the juice extractor becomes clogged during use, turn the  
processor off and remove the juice extractor. The excess pulp  
can now easily be removed using the spatula.  
Be sure to switch the appliance to “OFF” position after each use.  
Make sure the motor stops completely and unplug the unit before  
disassembling.  
FOR SAFETY, ALWAYS USE THE PUSHER WHEN PUTTING  
FRUIT INTO THE FEEDER TUBE - NEVER FEED BY HAND.  
Do not put your fingers or other objects into the juicer opening  
while it is operation. If food becomes lodged in the opening, use  
food pusher or another piece of fruit or vegetable to push it down.  
When this method of removing food lodged in the opening is not  
possible, turn the motor off, unplug unit and disassemble juicer to  
remove the remaining food.  
Citrus Juice Filter (31)  
WARNING: ALWAYS OPERATE THE JUICER AT LOWEST SPEED  
ONLY. DO NOT OPERATE THE CITRUS JUICER AT HIGHER  
SPEEDS.  
CAUTION: Make sure that the unit is unplugged from the power source and the operating  
button is “OFF” before inserting or removing attachments.  
4. Insert the juice reamer into the center  
of the citrus juice filter (31) with its shaft  
inside the central column of the bowl.  
1. Fit the processor bowl  
as detailed previously  
(page 4).  
2. Fit the citrus juice filter  
(31) into the processor  
bowl.  
3. Rotate counter  
clockwise. Ensure that  
the citrus juice filter tab  
has clicked into place.  
5. Plug in processor.  
6. Place fruit on juice reamer and hold with  
a cupped hand.  
7. Operate at lowest speed.  
WARNING: ALWAYS OPERATE THE  
JUICER AT LOWEST SPEED ONLY.  
DO NOT OPERATE THE CITRUS  
JUICER AT HIGHER SPEEDS.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Blender (8)  
CAUTION: Make sure that the  
unit is unplugged from the  
power source and the operating  
button is “OFF” before inserting  
or removing attachments and  
before cleaning.  
TO REMOVE THE  
BLENDER, YOU  
MUST FIRST  
UNLOCK AND  
REMOVE THE  
PROCESSOR LID (A).  
THEN UNLOCK ANS  
RMOVE THE  
1. Remove the processor bowl  
and lid.  
2. Remove the safety cover (2).  
This can only be done once the  
processor lid has been  
removed.  
3. Place the blender (8) into its  
location on the processor body  
with the handle to the left.  
Turn counter clockwise until  
the blender clicks into place  
and the arrows are aligned.  
Warning: Use extreme caution -  
blades are sharp. Handle  
carefully.  
BLENDER (B) BY  
TWISTING  
CLOCKWISE.  
WARNING  
4. Place food in blender.  
5. Place the blender lid (9) and  
the measuring cap (10) on the  
blender.  
6. Replace the processor bowl  
and processor lid. Ensure that  
the lid tab has clicked into  
place. The blender will not  
operate if the processor lid is  
not clicked in place.  
ALWAYS REMOVE  
THE BLENDER AND  
FIT THE SAFETY  
COVER (2) INTO THE  
RPOCESSOR BODY  
(1) WHEN USING THE  
PROCESSOR.  
7. Plug in the processor.  
8. Always operate the blender  
with the lid in place.  
CAUTION: Never operate the blender with more than 42 oz. (1250 ml) of liquid or when empty.  
• Recommended speed levels for blending are between 5 - Max.  
• Do not overload past the MAX level on the blender.  
• You can crush 10 oz. of ice cubes in 15-20 seconds in the blender.  
To prevent spilling, do not operate the blender with more than 42 oz. (1250 ml) of liquid.  
Avoid contact with moving parts at all times.  
• Do not blend boiling liquid.  
• To reduce the risk of severe injury to people or damage to the blender, keep hands, hair,  
clothing as well as spatulas and other utensils out of container while blending.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLEANING AND MAINTENANCE  
CAUTION: Make sure that the unit is unplugged from power source and control  
button is on “OFF” before inserting or removing any attachments and  
before cleaning.  
• Never immerse the unit, cord or plug in water or any other liquid.  
• Clean the motor block with a damp cloth only.  
• Only the stainless steel blades can be washed in the dishwasher.  
• All other parts can be cleaned in warm sudsy water using regular dishwashing liquid.  
• Cleaning the blender jar (flask):  
*Fill with sudsy warm water.  
*Place lid on jar.  
*Run blender at maximum speed for 30 seconds. Rinse and repeat if necessary.  
Hints & Tips  
• The metal blade (23) can be used for chopping meat, fish, vegetables, cheese, etc. setting  
the speed to maximum.  
• For finer chopping, increase the length of time you process.  
• For coarser chopping, use the pulse button for a few seconds and monitor food texture.  
• Pre-cut larger pieces to make them fit into the feed tube. When chopping hard foods (e.g.  
meat, cheese) cut into 1 “/2.4 cm cubes.  
• For shredding, place food horizontally into the feed tube, for slicing place the food  
vertically.  
• When blending, pour the liquids in first and then add the solid food. Begin blending at the  
lower speed and increase when needed.  
RE-SETTABLE THERMAL SAFETY DEVICE  
Your Euro-Pro Food Processing Center has been designed with a unique safety system which  
prevents damage to the unit’s motor and drive system, should you inadvertently overload your  
appliance. The safety system will automatically cut the electric power to the appliance when the  
device senses an overload or excessive temperature in the motor or drive system. Should this  
occur during use and the appliance stops functioning, follow the re-setting procedure below:  
1. Turn the “ON/OFF” speed control (4) to the “OFF” position  
2. Unplug the unit from the wall receptacle.  
3. Remove and empty either the blender flask or processor bowl (whichever is being used).  
Ensure that no food is jamming the cutting blades or attachments.  
4. Allow the appliance to cool down for a minimum of 30 minutes.  
5. Re-install the processor bowl or blender flask and re-plug appliance in the wall outlet.  
6. Proceed to use the appliance as before. Should the appliance still fail to operate, turn the  
“ON/OFF” speed control (4) to the “OFF” position and unplug from the wall outlet. Allow  
the appliance to cool down for an additional 1 to 2 hours. After this time has passed,  
repeat the restart procedure, steps 5 and 6 above.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO OPERATING LLC warrants this product to be free from defects in material and workmanship  
for a period of one (1) year from the date of purchase when utilized for normal household use.  
If your appliance fails to operate properly while in use under normal household conditions within the  
warranty period, return the complete appliance and accessories, freight prepaid. For customer service  
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC will repair  
or replace it free of charge. Proof of purchase date and $14.95 to cover the cost of return shipping and  
handling must be included.*  
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or replacement of the  
unit at our option. This warranty does not cover normal wear of parts and does not apply to any unit that has  
been tampered with or used for commercial purposes. This limited warranty does not cover damage caused  
by misuse, abuse, negligent handling or damage due to faulty packaging or mishandling in transit.  
This warranty is extended to the original purchaser of the unit and excludes all other legal and/or  
conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to the specific  
obligations expressly assumed by it under the terms of the limited warranty. In no event is EURO-PRO  
Operating LLC liable for incidental or consequential damages of any nature whatsoever. Some states do  
not permit the exclusion or limitation of incidental or consequential damages, so the above may not apply to  
you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from state to  
state.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of purchase  
date and to attach tag to item before packing with your name, complete address and phone number  
with a note giving purchase information, model number and what you believe is the problem with  
item. We recommend you insure the package (as damage in shipping is not covered by your  
warranty). Mark the outside of your package “ATTENTION CUSTOMER SERVICE”.  
OWNERSHIP REGISTRATION CARD  
FOR CANADIAN CONSUMERS ONLY  
Please complete and return within ten (10) days of purchase. The registration will enable us to contact you  
in the event a product defect is discovered. By returning this card you acknowledge to have read and  
understood the instructions for use, and warnings set forth in the accompanying instructions.  
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, QC H4S 1A7  
PURCHASER: ………………………………………………………………………………………………………………………  
ADDRESS: ………………………………………………………………………………………………..…………………………  
EKP110  
DATE OF PURCHASE: …………………….. MODEL: ………………. SERIAL NO: .……………..…………………………  
NAME AND ADDRESS OF STORE: …………………………………………………………………..…………………………  
Printed in Turkey  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cobra Electronics Automobile Electronics CDR 900 User Manual
Compaq Personal Computer DESKTOP 330 User Manual
Cooper Lighting Indoor Furnishings 201 IW User Manual
Craftsman Saw 3152145 User Manual
Craftsman Saw 13724885 User Manual
Crane Humidifier EE 3184 4138 User Manual
Crate Amplifiers Musical Instrument Amplifier BX50 DLX User Manual
Cub Cadet Lawn Mower 108 User Manual
Cypress Computer Hardware CY62167DV18 User Manual
DuPont Authentication Insect Control Equipment H 63377 User Manual