Dynex Network Card DX NUSB User Manual

Wireless N USB Network Adapter  
DX-NUSB  
USER GUIDE  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product features  
3
Package contents  
• Wireless N USB network adapter  
• Desktop adapter base  
• Quick Installation Guide  
• Installation software CD  
• This User Guide  
System requirements  
• PC-compatible desktop computer with one available USB port and CD/DVD drive  
• Windows® 2000, Windows XP, or Windows Vista®  
Components  
Activity LED  
USB  
adapter  
Component  
Description  
USB adapter  
Connects to your computer’s USB port or the desktop  
adapter base.  
Activity LED  
Lights up and flashes when the network adapter is active  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
4
Setting up your wireless network adapter  
Windows Vista™  
Important note: Install the software before inserting the card.  
To install the software and the adapter with Windows Vista:  
1
Insert the Installation Software CD into your CD/DVD drive. The AutoPlay box opens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting up your wireless network adapter  
5
2
Double-click Run Installer.exe. If you see a window titled, “An unidentified program  
wants access to your computer,” click Allow. The InstallShield Wizard screen opens.  
3
Click Next to begin the installation process.  
You may see a window titled, “Windows can't verify the publisher of this driver  
software.” This is normal and does not indicate a problem. Our software has been fully  
tested and is compatible with this operating system.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
6
4
Click Install this driver software anyway, then, when prompted, plug in your card.  
When the installation completes, the InstallShield Wizard Complete screen opens.  
5
6
Click Finish. Your installation is now complete.  
To connect to the Internet, open the Network and Sharing Center by clicking Start,  
Control Panel, Network and Internet - View network status and tasks. The  
Network and Sharing Center opens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
7
7
Click Connect to a network. The Connect to a network screen opens.  
8
Select an available wireless network, then click Connect. Your card attempts to  
connect to the selected network.  
9
Depending on the security settings of your wireless network, you may be prompted to  
enter in a network security key or a passphrase.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
8
10 Enter the network security key or passphrase, then click Connect. The successful  
connection screen opens.  
After connecting to the network, you may choose to save this network and connect  
automatically after your card is in range.  
The Network and Sharing Center should now show the network connection that you  
have just made. The links on the left of the window let you configure your network  
connections.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
9
All other Windows versions  
Important note: Install the software before inserting the card.  
To install the software:  
1
Insert the Installation Software CD into your computer’s CD/DVD drive. The  
InstallShield Wizard Welcome screen opens.  
Note: If the InstallShield Wizard Welcome screen does not open, double-click My Computer,  
then double-click the CD/DVD drive where the installation CD was placed. Double-click  
the Files folder, then double-click setup.exe.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
10  
2
Click Next. The Choose Destination Location screen opens.  
3
Click Next. The Please plug in your USB Adapter now screen opens.  
Note: If at any time during the install a warning appears that the software has not passed  
Windows® logo testing, click the Continue anyway button to proceed. This software is  
designed to run on Windows.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
11  
4
Firmly insert the USB adapter into an available USB slot. The Welcome to the Found  
New Hardware Wizard Welcome screen opens.  
Note: If your system did not prompt you to insert your Card, do so now.  
5
Click No, not this time, then click Next. The Found New Hardware Wizard Install  
screen opens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
12  
6
Click Install the software automatically (Recommended), then click Next. The  
Completing the Found New Hardware Wizard opens.  
7
Click Finish. The Setup has finished installing screen opens.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
13  
8
Click Yes, I want to restart my computer now, then click Finish. Your computer  
will restart and the Dynex Wireless Networking Utility opens.  
Note: In order to see your available networks, you must be near a working wireless router.  
9
Select a network to connect to from the Available Networks list, then click Connect.  
Note: If the Dynex Wireless Networking Utility did not open automatically, double-click the  
Wireless Utility icon in the system tray near the clock.  
Windows Vista™ Users: Connect to a wireless network through the Network and  
Sharing Center, accessible through your computer's Control Panel.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
14  
Connecting to your network  
To use the wireless networking utility:  
1
After restarting your computer, double-click the Wireless Networking Utility (WNU)  
icon located on the desktop screen.  
2
The WNU screen will appear. Select a network to connect to by selecting a network  
from the Available Networks list, then click Connect.  
Note: In order to see your available networks, you must be near a working wireless router (or  
access point).  
3
The WNU icon can also be found on the system tray.  
Note: Double-clicking on the WNU icon on the system tray will bring up the Utility screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
15  
Accessing the wireless networking utility  
To access the WNU from the Windows system tray:  
• Right-click the WNU icon on the Windows system tray in the lower right corner of the  
desktop.  
If the icon is not present, click on Start, Programs, Dynex, Wireless Networking  
Utility.  
The WNU’s default screen is the Current Status tab, which displays the current  
network status and available networks.  
Network Status  
This area displays the connectivity status of the current network, between the computer and  
router and between the router and the Internet. In the event of a problem, use the Network  
Status area to determine the source (for example, computer, router, or Internet/modem).  
Available Networks  
This area displays the available networks at the current location as well as the SSID, Signal  
Strength, Security Type, Channel, and Network Type.  
Lost Wireless Connection  
If the current wireless connection is lost, a window opens and the WNU attempts to  
reconnect.  
Connection Failure  
Other options will appear during attempts to reconnect. To stop trying to connect, click Stop.  
To re-try connecting, click Retry.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
16  
Network Status and Solution Tips  
To further understand the current Network Status, click Open Wireless Utility. The default  
screen is the Current Status tab and the Network Status section determines which  
connections are good or faulty.  
Setting Wireless Network Profiles  
The My Connections tab on the WNU lets you add, edit, and delete connection profiles. It  
also displays signal strength, security, and network type.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
17  
Securing your Wi-Fi® Network  
If your router has security (WEP or WPA) set, you will see this box when you try to connect.  
When this box opens, type the encryption key you set on your router, then click Connect.  
The next few pages are advanced options of setting the security through the adapter instead  
of the router.  
Note: When you select a network using encryption, you will first see the simple security  
screen. Click the Advanced button to see other security options (below).  
Wireless Equivalent Privacy (WEP) is a less secure, but more widely adopted wireless  
security protocol. Depending on the security level (64- or 128-bit), the user will be asked to  
input a 10- or 26-character hex key. A hex key is a combination of letters, a–f, and numbers,  
0–9.  
Wi-Fi Protected Access (WPA) is the new standard in the wireless security. However, not  
all wireless cards and adapters support this technology. Please check your wireless adapter’s  
user guide to check if it supports WPA. Instead of a hex key, WPA uses only passphrases,  
which are much easier to remember.  
The following section, intended for the home, home office, and small office user, presents a  
few different ways to maximize the security of your wireless network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting up your wireless network adapter  
18  
Currently, there are four encryption methods available:  
64-Bit Wired  
Equivalent  
Privacy  
128-Bit Wired  
Equivalent  
Privacy  
Wi-Fi Protected  
Access-TKIP  
Wi-Fi Protected  
Access 2  
64-bit WEP  
128-bit WEP  
WPA-TKIP/AES (or just WPA2-AES (or just  
Acronym  
WPA)  
WPA2)  
Good  
Better  
Best  
Best  
Security  
Features  
Static keys  
Static keys  
Dynamic key  
encryption and  
mutual  
Dynamic key  
encryption and  
mutual  
authentication  
authentication  
Encryption keys based More secure than  
on RC4 algorithm 64-bit WEP using a  
TKIP (Temporal Key  
Integrity Protocol)  
AES (Advanced  
Encryption Standard)  
(typically 40-bit keys) key length of 104 bits added so that keys are does not cause any  
plus 24 additional bits rotated and  
of system generated encryption is  
data  
throughput loss  
strengthened  
WEP  
WEP is a common protocol that adds security to all Wi-Fi-compliant wireless products. WEP  
gives wireless networks the equivalent level of privacy protection as a comparable wired  
network.  
WEP Encryption Keys—After selecting either the 64-bit or 128-bit WEP encryption mode,  
it is critical that you generate an encryption key. If the encryption key is not consistent  
throughout the entire wireless network, your wireless networking devices will be unable to  
communicate with one another. You can enter your key by typing in the hex key manually, or  
you can type a passphrase into the “Passphrase” field and click “Generate” to create a key. A  
hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9. For 64-bit  
WEP, you need to enter 10 hex characters. For 128-bit WEP, you need to enter 26 hex  
characters.  
For instance:  
AF 0F 4B C3 D4 = 64-bit WEP key  
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key  
The WEP passphrase is NOT the same as a WEP key. Your network adapter uses this  
passphrase to generate your WEP keys, but different hardware manufacturers might have  
different methods on generating the keys. If you have multiple vendors’ equipment in your  
network, the easiest thing to do is to use the hex WEP key from your wireless router (or  
access point) and enter it manually into the hex WEP key table in your network adapter’s  
configuration screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
19  
WPA  
WPA is a new Wi-Fi standard that improves upon the security features of WEP. To use WPA  
security, the drivers and software of your wireless equipment must be upgraded to support  
it. These updates will be found on your wireless vendor’s Web site. There are three types of  
WPA security: WPA-PSK (no server), WPA (with radius server), and WPA2.  
WPA-PSK (no server) uses what is known as a pre-shared key as the network key. A network  
key is a password that is between eight and 63 characters long. It can be a combination of  
letters, numbers, or characters. Each client uses the same network key to access the network.  
Typically, this is the mode that will be used in a home environment.  
WPA (with radius server) is a system where a radius server distributes the network key to the  
clients automatically. This is typically found in a business environment.  
WPA2 requires Advanced Encryption Standard (AES) for encryption of data, which offers  
much greater security than WPA. WPA uses both Temporal Key Integrity Protocol (TKIP) and  
AES for encryption.  
Most Wi-Fi products ship with security turned off. So once you have your network working,  
you need to activate WEP or WPA and make sure all your wireless devices are sharing the  
same network key.  
IMPORTANT: You must now set all wireless network cards/adapters to match these settings.  
Configuring your Wireless N USB adapter to use security  
You should already have your wireless router set to use WPA or WEP. To make a wireless  
connection you need to set your Wireless N USB network adapter to use the same security  
settings.  
Changing the Wireless Security Settings  
The Wireless N USB network adapter supports the latest WPA security feature as well as the  
legacy WEP security standard. By default, wireless security is disabled.  
Your Dynex wireless adapter is equipped with the latest security standard called Wi-Fi  
Protected Access 2 (WPA2™) and the legacy security standard called Wired Equivalent Privacy  
(WEP). It also supports the Wi-Fi Protected Setup (WPS) specification, which simplifies the  
setup of a wireless network. WPS uses familiar methodologies, such as typing in a Personal  
Identification Number (PIN) or pushing a button, to enable you to automatically configure  
network names and strong WPA/WPA2 data encryption and authentication.  
Using Wi-Fi protected setup:  
• Encryption key if not using WPS  
• Personal Identification Number (PIN) method: Your wireless adapter generates a PIN  
to be entered into your router.  
• Push Button Configuration (PBC) method: Your wireless adapter can also connect by  
using the software pushbutton.  
• Manual configuration method: This section lists the default security settings to be set  
if you are not using WPS.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
20  
WPS uses WPA2 for encryption. It does not provide additional security, but standardized the  
method for securing your wireless network. On your client utility, WPS-enabled networks are  
indicated by a key icon. You can use either the PBC method or the PIN method to let a device  
access your wireless network.  
To use the PBC method:  
1
Push and hold the WPS button (located on the back of your router) for three seconds.  
Initiate the WPS procedure on the client utility within two minutes.  
2
Open the WNU and select the network name, then click Connect. Your client  
automatically exchanges security information and is added to your wireless network.  
You can also initiate the PBS method from the client side.  
To use the PIN method:  
1
2
Open the WNU and select the WPS-enabled network, then click Connect.  
Choose the PIN method option, then complete the WPS procedure on your router. Your  
client is automatically enrolled in your wireless network within two minutes.  
To enable security, you will first need to determine which standard is used by the router. (See  
your wireless router’s guide for directions on how to access the security settings.)  
To access the security settings on your card:  
1
2
Open the WNU.  
Click the My Connections tab, then click the connection you want to change.  
3
Click Edit, then click Advanced to change settings.  
To access the security settings on your network adapter, click the My Connections tab and  
point to the connection for which you want to change security settings. Click Edit to change  
settings.  
Setting up WEP  
To set up 64-Bit WEP encryption:  
1
Select OPEN from the Network Authentication menu on the Wireless Network  
Properties tab on the Edit information for a network page.  
2
Select WEP from the Data Encryption menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
21  
3
After selecting your WEP encryption mode, enter your key by typing in the hex key  
manually, or type in a passphrase in the Passphrase field, then click Generate to  
create a key.  
A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9.  
For 64-bit WEP, you need to enter 10 hex characters.  
For instance:  
AF 0F 4B C3 D4 = 64-bit WEP key  
4
Click Save to finish. Encryption in the wireless router is now set. Each of your  
computers on your wireless network will now need to be configured with the same  
security settings.  
Caution: If you are using a wireless client to turn on the security settings in your wireless  
router, you will temporarily lose your wireless connection until you activate security on  
your wireless client. Please record the key prior to applying changes in the wireless router.  
If you don’t remember the hex key, your client will be locked out of the wireless router.  
Setting up 128-bit WEP encryption:  
1
Select OPEN from the Network Authentication menu on the Wireless Network  
Properties tab on the Edit information for a network page.  
2
Select WEP from the Data Encryption menu.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
22  
3
After selecting your WEP encryption mode, enter your key by typing in the hex key  
manually, or type in a passphrase in the Passphrase field, then click Generate to  
create a key.  
A hex (hexadecimal) key is a combination of numbers and letters from A–F and 0–9.  
For 128-bit WEP, you need to enter 26 hex characters.  
For instance:  
C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key  
4
Click Save to finish. Encryption in the wireless router (or access point) is now set. Each  
of your computers on your wireless network will now need to be configured with the  
same security settings.  
Caution: If you are using a wireless client to turn on the security settings in your wireless  
router, you will temporarily lose your wireless connection until you activate security on  
your wireless client. Please record the key prior to applying changes in the wireless router.  
If you don’t remember the hex key, your client will be locked out of the wireless router.  
To set up WPA-PSK (no server):  
Note: Choose this setting if your network does not use a radius server. WPA-PSK or  
WPA2-PSK (no server) is typically used in home and small office networking.  
1
2
Select WPA-PSK or WPA2-PSK (no server) from the Network Authentication menu  
on the Wireless Network Properties tab on the Edit information for a network page.  
Select TKIP or AES from the list.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting up your wireless network adapter  
23  
3
Enter your network key. This can be from eight to 63 characters and can be letters,  
numbers, or symbols. This same key must be used on all of the clients (network cards)  
that you want to include in your network.  
4
Click Save to finish. You must now set all clients (network cards) to match these  
settings.  
Wireless networking utility options  
The Options tab on the Wireless Networking Utility (WNU) lets you customize your WNU  
settings.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
24  
WNU Help  
The WNU Help tab lets you access online and telephone support, as well as advanced  
diagnostic tools.  
Advanced diagnostic tools  
The Advanced Diagnostic Tools section is the central control panel for all the settings of  
the hardware and software components of the wireless network. It provides an array of tests  
and connectivity services to ensure optimal network performance.  
Troubleshooting  
Placement of your wireless networking hardware for  
optimal performance  
Your wireless connection will be stronger the closer your computer is to your wireless router  
(or access point). Typical indoor operating range for your wireless devices is between 100 and  
200 feet. In the same way, your wireless connection and performance will degrade  
somewhat as the distance between your wireless router (or access point) and connected  
devices increases. This may or may not be noticeable to you. As you move farther from your  
wireless router (or access point), connection speed may decrease.  
Factors that can weaken signals simply by getting in the way of your network’s radio waves  
are metal appliances, obstructions, and walls.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Troubleshooting  
25  
If you have concerns about your network’s performance that might be related to range or  
obstruction factors, try moving the computer to a position between five and 10 feet from the  
wireless router (or access point) in order to see if distance is the problem. If difficulties  
persist, refer to the user guide for your wireless router.  
Note: While some of the items listed below can affect network performance, they will not  
prohibit your wireless network from functioning. If you are concerned that your network  
is not operating at its maximum effectiveness, this checklist may help.  
You cannot connect to the Internet wirelessly  
If you are unable to connect to the Internet from a wireless computer, check the following  
items:  
• Look at the lights on your wireless router. If you’re using a Dynex Wireless Router, the  
lights should be as follows:  
The power light should be on.  
The connected light should be on, and not blinking.  
The WAN light should be either on or blinking.  
• Open your Wireless Networking Utility (WNU) software by clicking on the icon in the  
system tray at the bottom right corner of the screen. The tray icon should look like this  
(the icon may be red or green):  
• The window that opens should have a list of Available Networks. Available networks  
are wireless networks to which you can connect.  
If you are using a Dynex 802.11n router, Dynex is the default name.  
If you are using a Dynex 802.11g (54g) router, Dynex54g is the default name.  
If you are using a Dynex 802.11b router, the default name should be WLAN.  
If you are NOT using a Dynex router, please consult your router manufacturer’s user  
guide for the default name.  
The name of your wireless network appears in Available Networks list.  
If the correct network name is listed in the Available Networks list, follow these steps to  
connect wirelessly:  
1
2
Click on the correct network name in the Available Networks list.  
If the network has security (encryption) enabled, enter the network key. For more  
information regarding security, see “Securing your Wi-Fi® Network” on page 17.  
3
Within a few seconds, the tray icon in the lower right corner of your screen should turn  
green, indicating a successful connection to the network.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
26  
The name of your wireless network DOES NOT appear in the list of  
Available Networks.  
If the correct network name is not listed under “Available Networks” in the WNU, try the  
following troubleshooting steps:  
1
Temporarily move the computer, if possible, to 5 to 10 feet away from the wireless  
router. Close the WNU and reopen it. If the correct network name now appears under  
Available Networks, you may have a range or interference problem. See the  
suggestions listed in “Placement of your wireless networking hardware for optimal  
performance” on page 24.  
2
Using a computer that is connected to the wireless router through a network cable (as  
opposed to wirelessly), make sure that Broadcast SSID is enabled. This setting is  
found on the router’s wireless Channel and SSID configuration page. For detailed  
instructions on accessing this page and changing settings, refer to the user guide for  
your wireless router.  
The installation CD does not start WNU  
If the installation CD does not start the WNU automatically, it could be that the computer is  
running other applications that are interfering with the CD drive.  
To start the installation manually:  
1
2
3
If the WNU screen does not appear within 15-20 seconds, open up your CD drive by  
double-clicking on the My Computer icon.  
Double-click on the CD drive that the installation CD has been placed in to start the  
installation.  
Double-click the Files folder, then double-click the Setup.exe icon.  
The power LED does not come ON. The network adapter is  
not working  
If the LED indicators are not ON, the problem may be that the network adapter is not  
connected or is not installed correctly.  
Make sure that the network adapter is plugged firmly into the USB port of your computer.  
Check to see that the drivers for the network adapter have been installed. Right-click on the  
My Computer icon on your desktop. Choose Properties and navigate to the Device  
Manager and see if your network adapter is listed without any errors. If an error is indicated,  
contact Technical Support.  
The link LED is blinking slowly. You cannot connect to a  
wireless network or the Internet  
If your network adapter appears to be functioning correctly, but you cannot connect to a  
network or you have a red wireless icon at the bottom of your screen, the problem may be  
that there is a mismatch between the network name (SSID) settings in your wireless network  
properties.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
27  
Check the SSID settings to see if they match. The SSID is case-sensitive and the spelling on  
each computer must be exactly the same in order for the network adapter to connect to the  
wireless router (or access point).  
Note: To check the SSID settings or look for an available network, double-click the Signal  
Indicator icon to bring up the Wireless Networks screen. Click Add if you do not see the  
network you are trying to connect to and type in the SSID.  
For more information about setting up an SSID, please refer to your router manufacturer’s  
user guide.  
Link LED is solid, but I cannot connect to the Internet  
If you have a signal but cannot get online or obtain an IP address, the problem may be that  
there is a mismatch between the encryption key settings in your computer and wireless  
router.  
Check the WEP key settings to see if they match. The key is case-sensitive and the spelling on  
each computer and wireless router must be exactly the same in order for the network  
adapter to connect to the router (or access point). For more information about encryption,  
please see “Securing your Wi-Fi® Network” on page 17.  
Data transfer is sometimes slow or signal strength is poor  
performance between devices decreases when the distance between devices increases.  
Other factors that cause signal degradation are obstructions such as walls and metal  
appliances. As a result, the typical indoor range of your wireless devices will be between 100  
to 200 feet. Note also that connection speed may decrease as you move farther from the  
wireless router (or access point).  
In order to determine if wireless issues are related to range, we suggest temporarily moving  
the computer, if possible, to 5 to 10 feet away from the wireless router. See “Placement of  
your wireless networking hardware for optimal performance” on page 24.  
Changing the wireless channel - Depending on local wireless traffic and interference,  
switching the wireless channel of your network can improve performance and reliability. The  
default channel the router is shipped with is channel 11. You may choose from several other  
channels depending on your region; see your router's (or access point's) user manual for  
instructions on how to choose other channels.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
28  
Limiting the wireless transmit rate - Limiting the wireless transmit rate can help  
improve the maximum wireless range, and connection stability. Most wireless cards have the  
ability to limit the transmission rate. To change this property, click Start, Control Panel,  
Network Connections, then double-click your card's connection. In the Properties dialog,  
select the Configure button on the General tab (Windows 98 users will have to select the  
Wireless Card in the list box and then click Properties), then choose the Advanced tab and  
select the rate property. Wireless client cards are usually set to automatically adjust the  
wireless transmit rate for you, but doing so can cause periodic disconnects when the wireless  
signal is too weak; as a rule, slower transmission rates are more stable. Experiment with  
different connection rates until you find the best one for your environment; note that all  
available transmission rates should be acceptable for browsing the Internet. For more  
assistance, see your wireless card's literature.  
Why are there two wireless utilities in my system tray?  
Which one should I use?  
There are several features and advantages to using the WNU over the Windows XP Wireless  
Zero Configuration utility. We offer a site survey, detailed link information, and adapter  
diagnosis, to name a few.  
It’s essential to know which utility is managing your adapter. We recommend using the WNU.  
To use the WNU:  
1
2
3
Right-click on the network status icon in the system tray and select View Available  
Wireless Networks.  
Click Advanced in the lower left-hand corner of the Available Wireless Networks  
window.  
From the Advanced tab, uncheck Use Windows to configure my wireless  
network. After the box is unchecked, click OK to close the window.  
You are now using the WNU to configure the network adapter.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
29  
What's the difference between 802.11b, 802.11g, 802.11a, and  
802.11n?  
Currently there are four levels of wireless networking standards, which transmit data at very  
different maximum speeds. Each is based on the designation for certifying network  
standards. The most common wireless networking standard, 802.11b, transmits information  
at 11 Mbps; 802.11a and 802.11g work at 54 Mbps; and Pre-N works at 108 Mbps. The  
802.11n release promises speeds that exceed 802.11g, and up to twice the wireless coverage  
area. See the following chart for more detailed information.  
Wireless  
Technology  
802.11b  
11Mbps  
802.11g  
54Mbps  
802.11a  
54Mbps  
802.11n  
600% faster than  
standard 802.11g*  
Speed  
Common household Common household 5GHz- uncrowded  
Common household  
devices such as  
cordless phones and  
microwave ovens  
may interfere with  
the unlicensed band  
2.4GHz  
devices such as  
devices such as  
band  
cordless phones and cordless phones and  
Frequency  
microwave ovens  
may interfere with  
microwave ovens  
may interfere with  
the unlicensed band the unlicensed band  
2.4GHz  
2.4GHz  
Compatible with  
802.11g  
Compatible with  
802.11b  
Incompatible with  
Compatible with  
Compatibility  
Coverage*  
802.11b or 802.11g 802.11g or 802.11b  
Depends on  
Depends on  
Interference range is Up to 800% wider  
interference-typicall interference-typicall typically 50-100 ft. coverage than  
y 100-200 ft. indoors y 100-200 ft. indoors  
standard 802.11g*  
Mature-legacy  
Advantage technology  
Common-widesprea Less interference-  
Leading edge- best  
d use for Internet  
sharing  
great for multimedia coverage and  
application throughput  
*Distance and connection speeds will vary depending on your networking environment.  
Specifications  
Host Interface  
USB 2.0 interface  
Power Consumption  
Operating Temperature  
Storage Temperature  
Humidity  
Tx/Re peak 510/250mA @ 3.3VDC (max.)  
32 to 140° F (0 to 60° C)  
-4 to 176° F (-20 to 80° C)  
Max. 90% (non-condensing)  
Typical Operating Range 100–200 ft. (30–60 m) indoors  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Legal notices  
30  
Legal notices  
FCC Statement  
DECLARATION OF CONFORMITY WITH FCC RULES FOR  
ELECTROMAGNETIC COMPATIBILITY  
We, the Dynex Corporation, 7601 Penn Avenue South, Richfield, Minnesota, U.S.A., declare  
under our sole responsibility that the product, F5D7001, to which this declaration relates,  
complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:  
(1) this device may not cause harmful interference, and (2) this device must accept any  
interference received, including interference that may cause undesired operation.  
Caution: Exposure to Radio Frequency Radiation.  
The radiated output power of this device is far below the FCC radio frequency exposure limits.  
Nevertheless, the device shall be used in such a manner that the potential for human contact  
during normal operation is minimized. When connecting an external antenna to the device,  
the antenna shall be placed in such a manner to minimize the potential for human contact  
during normal operation. In order to avoid the possibility of exceeding the FCC radio  
frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8  
inches) during normal operation.  
FCC warning  
Changes or modifications not expressly approved by the party responsible for compliance  
with the FCC Rules could void the user’s authority to operate this equipment.  
DHHS and FDA safety certification  
This product is made and tested to meet safety standards of the FCC, requirements and  
compliance with safety performance of the U.S. Department of Health and Human Services,  
and also with FDA Radiation Performance Standards 21 CFR Subchapter J.  
Canada ICES-003 statement  
This Class B digital apparatus complies with Canadian ICES-003.  
FCC Part 15  
This device complies with Part 15 of the FCC Rules. Operation of this product is subject to the  
following two conditions: (1) this device may not cause harmful interference, and (2) this  
device must accept any interference received, including interference that may cause  
undesired operation.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Legal notices  
31  
This equipment has been tested and found to comply within the limits for a class B digital  
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment  
generates, uses, and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications.  
However, there is no guarantee that interference will not occur in a particular installation. If  
this equipment does cause harmful interference to radio or television reception, which can  
be determined by turning the equipment off and on, the user is encouraged to try to correct  
the interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
• Increase the separation between the equipment and receiver.  
• Connect the equipment into an outlet on a circuit different from that to which the  
receiver is connected.  
• Consult the dealer or an experienced technician for help.  
RSS 210 statement  
To reduce potential radio interference to other users, the antenna type and its gain should be  
so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that  
permitted for successful communication.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legal notices  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legal notices  
33  
One-Year Limited Warranty  
Dynex Products (“Dynex”) warrants to you, the original purchaser of this new DX-NUSB (“Product”), that the  
Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1)  
year from the date of your purchase of the Product (“Warranty Period”). This Product must be purchased from an  
authorized dealer of Dynex brand Products and packaged with this warranty statement. This warranty does not  
cover refurbished product. If you notify Dynex during the Warranty Period of a defect covered by this warranty  
that requires service, terms of this warranty apply.  
How long does the coverage last?  
The Warranty Period lasts for one year (365 days) from the date you purchased the Product. The purchase date is  
printed on the receipt you received with the Product.  
What does this warranty cover?  
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is  
determined to be defective by an authorized Dynex repair center or store personnel, Dynex will (at its sole option):  
(1) repair the Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt  
comparable products or parts. Products and parts replaced under this warranty become the property of Dynex  
and are not returned to you. If service of products and parts are required after the Warranty Period expires, you  
must pay all labor and parts charges. This warranty lasts as long as you own your Dynex Product during the  
Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.  
How to obtain warranty service?  
If you purchased the Product at a retail store location, take your original receipt and the Product to the store you  
purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the  
same amount of protection as the original packaging. If you purchased the Product from an online web site, mail  
your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in  
its original packaging or packaging that provides the same amount of protection as the original packaging.  
To obtain in-home warranty service for a television with a screen 25 inches or larger, call 1-888-BESTBUY. Call  
agents will diagnose and correct the issue over the phone or will have an Dynex-approved repair person  
dispatched to your home.  
Where is the warranty valid?  
This warranty is valid only to the original purchaser of the Product in the United States, Canada, and Mexico.  
What does the warranty not cover?  
This warranty does not cover:  
Customer instruction  
Installation  
Set up adjustments  
Cosmetic damage  
Damage due to acts of God, such as lightning strikes  
Accident  
Misuse  
Abuse  
Negligence  
Commercial use  
Modification of any part of the Product  
Plasma display panel damaged by static (non-moving) images applied for lengthy periods (burn-in).  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Legal notices  
34  
This warranty also does not cover:  
Damage due to incorrect operation or maintenance  
Connection to an incorrect voltage supply  
Attempted repair by anyone other than a facility authorized by Dynex to service the Product  
Products sold as is or with all faults  
Consumables, such as fuses or batteries  
Products where the factory applied serial number has been altered or removed  
REPAIR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS YOUR EXCLUSIVE REMEDY. DYNEX SHALL NOT BE  
LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY EXPRESS OR IMPLIED  
WARRANTY ON THIS PRODUCT, INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF USE OF YOUR PRODUCT, LOST  
BUSINESS OR LOST PROFITS. DYNEX PRODUCTS MAKES NO OTHER EXPRESS WARRANTIES WITH RESPECT TO THE  
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO, ANY  
IMPLIED WARRANTIES OF AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE  
LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE AND NO WARRANTIES, WHETHER EXPRESS OR  
IMPLIED, WILL APPLY AFTER THE WARRANTY PERIOD. SOME STATES, PROVINCES AND JURISDICTIONS DO NOT  
ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO  
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE OR PROVINCE TO PROVINCE.  
Contact Dynex:  
For customer service please call 1-800-305-2204  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Avenue South, Richfield, Minnesota, U.S.A. 55423-3645  
© 2008 Best Buy Enterprise Services, Inc.  
All rights reserved. DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All  
other products and brand names are trademarks of their respective owners.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legal notices  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
08-1599  
PM01442  
© 2008 Best Buy Enterprise Services, Inc. All rights reserved.  
DYNEX is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries. All other  
products and brand names are trademarks of their respective owners.  
Distributed by Best Buy Purchasing, LLC  
7601 Penn Ave. South, Richfield, MN 55423 U.S.A.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Coleman Camping Equipment 5344 User Manual
Cuisinart Frozen Dessert Maker ICE 45 User Manual
Curtis Turntable RCD822 B User Manual
Delta Electronics Power Supply 45V~ 55V User Manual
Desa Portable Generator Rgh3000 Rgh3000pr Rgh5500a Rgh5500aie Rgh7500aie And Rgh11000aie User Manual
DigiTech Guitar CM 2 User Manual
Euro Pro Food Processor EKP110 User Manual
Evo Fitness Projector XGA User Manual
FEIN Power Tools Drill DDSK 672 1 User Manual
Gitzo Camcorder Accessories G1228LVL User Manual