Dell™ PowerVault™ 750N and 755N NAS Appliances
SYSTEM ADMINISTRATOR’S GUIDE
ww w.d e ll.com
su p p or t.d e ll.com
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1-2
1-3
1-3
System Configuration
Basic Configuration .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
1-3
.
.
.
.
.
.
.
.
1-6
.
.
.
.
.
.
.
.
.
.
.
1-14
Basic Navigation
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-2
2-2
2-3
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-3
Using Shares
Adding a Share
2-4
2-4
2-5
2-6
2-6
2-6
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Removing a Share .
.
.
.
.
.
Removing a Protocol From the Share
Using the PowerVault Advanced Administration Menu
Retrieving Your Service Tag .
.
.
.
.
.
.
.
.
.
.
2-7
.
.
.
.
.
.
.
.
.
.
.
.
2-8
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-8
2-8
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-9
2-10
2-10
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-11
2-11
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-13
2-14
.
.
.
.
.
.
2-14
2-14
2-15
2-15
2-16
2-16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
2-17
2-17
2-17
2-18
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Rescanning for Disks
.
Array Manager Common Tasks .
Creating a New Volume .
Deleting an Existing Volume
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-2
3-2
3-2
3-3
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Expanding an Existing Volume
Contents
4
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-3
3-3
3-4
Right Pane
.
.
.
.
.
.
.
.
.
.
.
3-4
.
.
.
.
.
.
.
.
.
.
.
3-5
3-5
3-5
3-6
3-7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-10
3-10
3-10
3-11
3-11
3-11
3-12
3-12
3-12
Format
Rebuild
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-12
3-13
3-13
3-13
3-13
3-14
3-14
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Disk Management
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-14
3-14
3-15
3-16
3-16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Reactivating Dynamic Disks .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Merging Foreign Disks
.
.
.
Volume Management
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-16
Volume Overview
3-17
Contents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
3-17
3-17
3-18
.
.
.
Delete a Partition or Volume
.
.
.
3-18
3-20
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Extending a Dynamic Simple or Spanned Volume
.
.
.
.
.
.
.
.
.
4-2
Alert Log Messages From Dell OpenManage
.
.
.
.
.
.
.
.
.
.
Configuring SNMP Community Properties
Configuring SNMP Agent Properties
4-4
.
.
.
.
.
.
.
.
.
4-5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-2
5-2
5-3
System State Backup and Restore
.
.
.
.
.
.
.
.
.
.
.
5-3
5-4
5-4
.
.
.
.
.
.
.
.
.
.
.
5-6
5-6
.
.
.
.
.
.
.
.
.
.
.
.
5-7
Installing Network Accelerator Agents
.
.
.
.
.
.
5-7
Third-Party Backup Software for Local Backups
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-7
5-7
5-9
Installing VERITAS Backup Exec .
Installing ARCserve 2000 . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Contents
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing Up Persistent Images
.
.
.
.
.
.
.
.
.
.
.
5-10
5-11
Installing Tape Device Drivers for Windows 2000 Backup
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
5-13
.
.
.
.
.
.
.
.
.
.
.
.
.
6-2
6-3
6-3
6-3
6-3
6-4
6-4
6-4
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Accessing Directories, Folders, and Files
.
.
.
.
.
.
.
.
.
6-5
Scheduling Persistent Images
.
.
.
.
.
.
6-6
6-6
6-6
6-7
6-7
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Using Persistent Images
Taking a New Persistent Image on Demand
Deleting a Persistent Image .
.
.
.
.
.
.
.
.
.
.
6-8
6-8
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
6-9
Setting Persistent Image Retention Weights .
6-9
Configuring the Persistent Image Global Settings
Configuring Persistent Image Volume Settings
6-10
6-10
.
Contents
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessing Stored Persistent Images in ActiveArchive
.
.
.
.
.
.
.
.
.
6-11
6-12
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-2
7-5
7-6
.
.
.
.
.
.
.
7-8
7-9
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-9
Utility .
.
.
.
.
.
.
.
.
.
.
.
7-10
.
.
.
.
.
.
.
.
.
.
7-10
7-11
7-11
7-12
7-13
7-13
7-13
7-15
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Basic Scenarios .
.
.
.
.
.
File Server for Macintosh
Services for NetWare
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-16
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-18
Configuring the NWLink IPX/SPX Compatible Protocol
7-18
8
Cont ent s
Download from Www.Somanuals.com. All Manuals Search And Download.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-19
7-19
7-20
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-25
7-26
Using Secured Socket Layers
7-27
7-27
7-28
7-28
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Using a Custom Certificate
.
.
Certification Authority
.
.
.
.
.
.
.
.
.
.
.
7-28
Console Redirection
.
.
.
.
.
.
.
.
7-29
7-30
7-30
7-30
7-31
7-32
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Configuring Console Redirection on the Client System .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Configuring Special Keys
Defragmenting a Volume Containing Persistent Images .
.
.
.
.
7-36
Features .
.
.
.
.
.
.
.
.
.
8-2
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-3
8-4
Using the Online Server Diagnostics .
Starting the Online Server Diagnostics
Specifying a Target Appliance .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-4
8-4
8-4
8-5
8-5
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Configuring Online Server Diagnostics .
Running Online Server Diagnostics
.
.
Contents
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Exiting Diagnostics
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
8-6
8-6
Learning About Diagnostic Tests .
Tables
Table 7-3.
.
.
.
.
.
.
.
.
.
.
.
.
1-7
7-11
7-30
.
.
VT100/220 Supported Escape
Sequences .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
7-33
7-34
7-35
9-2
Table 7-4.
Table 7-5.
Table 9-1.
ANSI Supported Escape Sequences
Additional Escape Sequences
Troubleshooting Issues
.
.
.
.
.
.
.
.
.
.
10
Cont ent s
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface
This guide provides system administrators, IT professionals, and those responsible for the
Chapters include the following information:
•
•
•
Chapter 1 — “Introduction” provides an overview of the system features, as well as the
information necessary to perform the initial configuration of the system.
and how to find help.
Chapter 3 — “Advanced Disk and Volume Management Using Array Manager”
view.
•
a Dell OpenManage™ Remote Assistant Card (DRAC) and information about Dell
OpenManage Server Assistant.
•
•
recovering from system failure, and how to back up and restore the system state.
Chapter 6 — “Dell ActiveArchive™” provides information on the creation and
volumes using Dell ActiveArchive.
•
and other advanced features.
•
•
Chapter 8 — “Online Server Diagnostics” describes how to install and run the Online
Server Diagnostics on your NAS appliance.
Chapter 9 — “Troubleshooting” lists potential issues with probable causes and
possible solutions.
Warranty and Return Policy Information
Dell Computer Corporation (“Dell”) manufactures its hardware products from parts and
components that are new or equivalent to new in accordance with industry-standard
practices. For information about the Dell warranty for your system, see your System
Information document.
Preface
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety, Regulatory, and Warranty Information
For safety, regulatory, and warranty information for your system, see the System Information
document included with your system.
Other Documents You May Need
In addition to this System Administrator’s Guide, the following documentation is included
with your system:
•
The NAS appliance User's Guide, which describes system features, technical
specifications, and device drivers.
•
The NAS appliance Installation and Troubleshooting Guide provides instructions for
installing system hardware and includes troubleshooting and diagnostic procedures for
testing your system.
•
•
•
•
Supporting system documentation on the NAS appliance Resource CD, that includes
information about all the option cards and software installed.
The NAS appliance Localization CD that contains the Microsoft® Windows®
Multilanguage User Interface (MUI) and language locales.
Your System Information document, which provides basic information about your
system.
The Dell OpenManage Array Manager User’s Guide provides instructions for using the
Dell OpenManage™ Array Manager common interface for configuring and managing
local and remote storage.
•
•
The Dell OpenManage Remote Assistant Card (DRAC) User's Guide provides
instructions for using the DRAC to manage and use a server through a modem or
network connection, even when the server itself is down.
The Dell OpenManage Server Agent Messages Reference Guide describes the event
messages logged by the Dell OpenManage Server Agent 4.0 or later.
You may also have one or more of the following documents:
•
Documentation that is included with options you purchase separately from the
system. This documentation includes information that you need to configure and
install these options in your system.
12
P refa ce
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Technical information files—sometimes called “readme” files—that might be
installed on the hard-disk drive to provide last-minute updates about technical
changes to the system or advanced technical reference material intended for
experienced users or technicians.
Documentation updates that are sometimes included with the system to describe
changes to the system or software. Always read these updates before consulting any
other documentation. These updates often contain information that supersedes the
information in the other documents.
Notational Conventions
The following subsections describe notational conventions used in this document.
Notes, Notices, Cautions, and Warnings
NOTE: A NOTE indicates important information that helps you make better use of your
computer.
NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you
how to avoid the problem.
CAUTION: A CAUTION indicat es a pot ent ially hazardous sit uat ion which, if not
avoided, may result in minor or moderate injury.
WARNING: A WARNING indicates a pot ent ially hazardous sit uat ion which, if not
avoided, may result in severe injury.
Some warnings may appear in alternate formats and may be unaccompanied by an icon. In
such cases, the specific presentation of the warning is mandated by regulatory authority.
Typographical Conventions
The following list defines (where appropriate) and illustrates typographical conventions
used as visual cues for specific elements of text throughout this document:
•
Keycaps, the labeling that appears on the keys on a keyboard, are enclosed in angle
brackets.
Example: < Enter>
•
•
Key combinations are series of keys to be pressed simultaneously (unless otherwise
indicated) to perform a single function.
Example: < Ctrl> < Alt> < Enter>
Preface
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Commands presented in lowercase bold are for reference purposes only and are not
intended to be typed when referenced.
Example: “Use the format command to...”
In contrast, commands presented in the Courier New font are part of an instruction
and intended to be typed.
Example: “Type format a: to format the diskette in drive A.”
•
•
Filenames and directory names are presented in lowercase bold.
Examples: autoexec.bat and c:\windows
Syntax lines consist of a command and all its possible parameters. Commands are
displayed in lowercase bold; variable parameters (those for which you substitute a
value) are displayed in lowercase italics; constant parameters are displayed in lowercase
bold. The brackets indicate items that are optional.
Example: del [drive:] [path] filename [/p]
•
•
Command lines consist of a command and may include one or more of the command’s
possible parameters. Command lines are presented in the Courier New font.
Example: del c:\myfile.doc
Screen text is text that appears on the screen of your monitor or display. It can be a
system message, for example, or it can be text that you are instructed to type as part of
a command (referred to as a command line). Screen text is presented in the Courier
New font.
Example: The following message appears on your screen:
No boot device available
Example: “Type md c:\programs and press < Enter> .”
•
Variables are placeholders for which you substitute a value. They are presented in
italics.
Example: DIMMx (where x represents the DIMM socket designation).
14
P refa ce
Download from Www.Somanuals.com. All Manuals Search And Download.
This chapter provides an overview of the Dell™ PowerVault™ 750N and 755N network
attached storage (NAS) appliances features, as well as the information necessary to perform
the initial configuration of the system.
These systems are “headless” systems that are managed through the onboard Ethernet
connection; they operate without a keyboard, monitor, or mouse. While it is possible to
connect these peripherals to a system, it is generally not necessary unless you are
troubleshooting the system. These systems are managed and monitored via a Web-based
user interface, the NAS Manager. You can also manage these systems remotely from a client
computer attached to the network.
The Boot Process
The internal drives in your NAS appliance are logical small computer system interface
(SCSI) drives that are controlled by a hardware redundant array of independent disks
(RAID) controller. The Microsoft® Windows® Powered operating system and boot sectors
are installed on two RAID 1 (mirrored) hard-disk drives.
The PowerVault 755N NAS appliance, which is a rack mounted system, uses a split bus and
has five drives. One drive is in the drive media bay and four drives are in the standard bay.
The operating system is installed on two mirrored RAID 1 drives. Data is stored on the
remaining three drives that are configured as RAID 5 drives.
The PowerVault 750N NAS appliance, which can be a tower or rack mounted system, uses a
split bus and has eight drives. Two drives are in the drive media bay and six drives are in the
drive internal bay. The operating system is installed on the two drives in the media bay,
which are configured as mirrored RAID 1 drives. Data is stored on the remaining six drives
that are configured as RAID 5 drives.
The boot sequence is as follows:
•
•
•
CD-ROM drive
Diskette drive
Operating system hard-disk drive
1-2
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
System Configuration
You can perform most configuration tasks through the NAS Manager, which is a web
browser interface to the NAS appliance. The NAS Manager menus consist of common
management tasks grouped under tabs on a menu bar. Each tab on the main menu bar has
an associated secondary menu bar associated with it. The secondary menu bar lists the tasks
you can perform from that page. The NAS Manager allows you to perform routine
administrative tasks such as shutdown, restart, new share creation, and set user
configuration. The NAS Manager home page displays a status indicator and provides a link
to the Messages page, which contains details about logged events.
You can access the Terminal Services Advanced Client from the NAS Manager to perform
tasks not available directly through the NAS Manager. See “Advanced Features” for more
information.
Administrator User Name and Password
To log on to the NAS Manager, you must enter the administrator user name and password.
The default administrator user name is administrator and the default password is
powervault. To change the user name and password, click Set Administrator Password in
the Welcome window.
Basic Configuration
This section includes information to enable you get your system up and running. You will
users, shares, and so on.
NOTICE: If you do not use Kick-Start to configure your system, you must disable Kick-Start
immediately. If Kick-Start is enabled, the system logs in automatically as administrator, which
creates a security risk. Kick-Start also takes up system resources by constantly checking for
configuration information. For additional information, see “Disabling the Kick-Start Utility.”
There are several ways to configure your system, depending on whether or not you are using
Dynamic Host Configuration Protocol (DHCP):
•
If DHCP is installed on your network, your system automatically configures the
network settings.
•
If DHCP is not installed on your network, you can configure your system using a serial
connection or the Dell OpenManage™ Kick-Start utility.
Introduction
1-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring Your System With DHCP
NOTICE: If you do not use Kick-Start to configure your system, you must disable Kick-Start
immediately. If Kick-Start is enabled, the system logs in automatically as administrator, which
creates a security risk. Kick-Start also takes up system resources by constantly checking for
configuration information. For additional information, see "Disabling the Kick-Start Utility."
When the system is powered on for the first time, it invokes the DHCP client to get
parameters (the Internet protocol (IP) address, gateway subnet mask, and domain naming
system (DNS) server address) from a DHCP system. The default system name
(“Dellxxxxxxx”, where xxxxxxx is the system’s service tag number) is entered as the DNS
server name. Connect to the system using Microsoft Internet Explorer 5.0 or later (or for
Red Hat Linux only, use Netscape Navigator 6.0 or later) by entering the system name in
the Web browser.
®
NOTE: Microsoft Internet Explorer 4.0 may be used only with Windows NT 4.0 with Service
Pack 4 or later. All other browsers are not supported.
If DHCP fails, you need to set the IP address, gateway subnet mask, and DNS server using
either a serial connection or the Kick-Start utility.
You can configure the system using the NAS Manager. The NAS Manager is served on port
1279 and is accessed by the URL,https://< systemname | system_ipaddress> :1279, where
systemname is the DELL< service_tag> . Port 1279 uses secured socket layers (SSL) to
encrypt data going to and coming from the NAS appliance to provide some data security.
NOTICE: Although port 1278 can be used, it uses plain text authentication, which can be a
significant security risk. Therefore, using port 1278 is not recommended.
In a system without a DNS server, you can use Internet Explorer (or for Linux only, use
Netscape 6.0 or later) to search for the default hostname of the system (“Dellxxxxxxx”,
where xxxxxxx is the system’s service tag number).
NOTE: The NAS Manager default administrator user name is administrator and the
default password is powervault.
Configuring Your System Using a Serial Connection
NOTICE: If you do not use Kick-Start to configure your system, you must disable Kick-Start
immediately. If Kick-Start is enabled, the system logs in automatically as administrator, which
creates a security risk. Kick-Start also takes up system resources by constantly checking for
configuration information. For additional information, see “Disabling the Kick-Start Utility.”
NOTE: You must be logged in as Administrator to perform these steps.
1-4
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
On a system running Windows 2000, perform the following steps to connect to the NAS
Manager through the Administration port:
1
Connect the serial cable included with your system from the system you are using for
configuration to the administration port (serial port 1) on your system.
2
3
4
5
Click the Start button, point to Settings, and then click Control Panel.
In the Control Panel, click Phone and Modem Options.
On the Modems tab, click Add for the Add/Remove Hardware Wizard.
Click the Don't detect my modem; I will select it from a list checkbox and then click
Next.
6
7
In the drop-down menu for Manufacturers, click (Standard Modem Types).
In the drop-down menu for Models, click Communications cable between two
computers, and then click Next.
8
9
Click the Selected ports radio button, select the appropriate communication port
from the list, and then click Next.
Click Finish to close the Add/Remove Hardware Wizard, and then click OK to close
the Phone and Modem Options dialog box.
10 On the desktop, right-click My Network Places and click Properties.
11 In the Properties window, double-click Make New Connection.
The Network Connection Wizard displays.
12 Click Next.
13 Select the radio button for Connect Directly To Another Computer and click Next.
14 Select the radio button for Guest and click Next.
15 In the drop-down menu, click the COM port that you are using and then click Next.
16 Click Only for myself and then click Next.
17 Enter the name of the connection and then click Finish.
After you configure your direct serial connection, the Connect Direct Connection
window displays.
18 Click Properties.
19 Click the General tab.
20 Under Select a Device, click Communication cable between two computers.
Introduction
1-5
Download from Www.Somanuals.com. All Manuals Search And Download.
21 Click Configure.
This selection opens the Modem Configuration window.
22 In the Maximum Speed (bps) drop-down menu, click 115200.
23 Click OK to close the Modem Configuration window.
24 Click OK to close the Direct Connection window.
The Connect Direct Connection box prompts you for a user name and password.
25 Enter the user name and password for your system.
26 Click Connect.
This action connects the system you are using for configuration.
27 Start the Web browser on the system you are using to configure the NAS appliance.
28 Type in the name of the PowerVault 750N or 755N system.
The PowerVault NAS Manager displays.
Configuring Your System Using the Kick-Start Utility
The Kick-Start utility is software shipped with your system. This utility is used to define the
initial network configuration of a system, which makes the system available on the network
for complete configuration using the NAS Manager. This utility is intended for customers
who have one or more systems to configure but do not want to use the default DHCP
assigned address and system name.
A NAS appliance requires configuration information before it can function on the web. You
can specify this information locally using the Kick-Start utility installed on the NAS
appliance.
You can also supply configuration information using the Remote Kick-Start utility (a
browser-based Java applet) to save the configuration information on a diskette or send it to
one or more systems across an IP network from another system on the same IP subnet.
NOTE: The system you use to create configuration files must be running Windows 2000 and
have one of the following browsers installed: Microsoft Internet Explorer 5.0 or higher or
Netscape 6.0 or higher. If you use a Netscape browser, you must install the Java plug-in, which
is available at http://java.sun.com/.
NOTE: The Remote Kick-Start utility provides an integrated DHCP service that can supply a
temporary IP address to discovered NAS appliances that you add to your network before
configuring them. If your network already provides DHCP services, the Remote Kick-Start
utility detects this and does not turn on the integrated DHCP service.
1-6
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 1 - 1 . K ic k - S t a r t Co n f i g u r a t i o n Ove r v i e w
St ep 1 Step 2
Record the following informat ion:
Use this guide and the Resource NIC 0: IP Address
CD included with your system. NIC 0: Subnet Mask
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_ _ _ . _ _ _ . _ _ _ . _ _ _
_____________________
_____________________
_____________________
____________________
NIC 0: Gateway
NIC 1: IP Address
NIC 1: Subnet Mask
NIC 1: Gateway
Host Name
DNS Server
Administrator/Root Password
Additional User/Password (if
any)
St ep 3
Perform one of the following methods of configurat ion:
Appliance does not have a
Appliance does not have a
monitor and keyboard
attached and is not
connected to an IP network
Remote Diskett e
Appliance has a monit or and
keyboard attached
monitor and keyboard
attached but is connected
t o an IP network
Remot e IP Network
Local
a Go to a workstation on your
network, insert the
Resource CD, and run
Remote Kick-Start.
a Go to a workstation on your
network, insert a diskette,
and then insert the
Resource CD. Run Remote
Kick-Start to copy
a Turn on the NAS appliance.
The Kick-Start utility
appears.
b Follow the screen
b Enter information collected
in step 2 and save the
configuration.
instructions and enter data
you collected in step 2.
When you finish, the
system restarts.
configuration settings to
the diskette.
b Enter information collected
in step 2 and save the
configuration to the
diskette.
c Select a NAS appliance,
select the configuration,
and click Apply.
c Start the NAS Manager in a
browser from a remote
workstation using this
address:
https://myappliance:1279,
where myappliance is your
system name.
d Start the NAS Manager in a
browser from a remote
workstation using this
address:
https://myappliance:1279,
where myappliance is your
system name.
c Insert the diskette into the
NAS appliance diskette
drive.
d Start the NAS Manager in a
browser from a remote
workstation using this
address:
https://myappliance:1279,
where myappliance is your
system name.
Introduction
1-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration Methods
You can specify configuration information using the following methods:
•
Method 1: Remote Configuration — Use the Remote Kick-Start utility located on
the Resource CD to enter configuration information. This method does not require
you to attach a mouse, keyboard, or monitor to the NAS appliance (a system without
input devices is sometimes called a headless system). You can remotely configure a
NAS appliance in one of the following ways:
–
Preparing the configuration information for one or more NAS appliances on a
diskette that you create on another system. You can save one configuration or an
ordered set of configuration files on a diskette.
–
Sending the configuration information to the NAS appliance over an IP network.
The system you use must be on the same IP subnet as the NAS appliance.
•
Method 2: Local Server Configuration — Use the Kick-Start utility provided on the
NAS appliance to specify configuration information directly on the system, which
requires you to attach a monitor, keyboard, and mouse to the NAS appliance. This
native version of the Kick-Start utility starts when you turn on the system.
Method 1: Configuring NAS Appliances Remotely
information to the NAS appliance either on a Kick-Start diskette or sent from another
system on the same network IP subnet.
This method is probably the easiest if you are configuring multiple systems. For more
information about the multiple configuration feature, see “Notes on NAS Appliance
Multiple Configuration Files.”
Starting the Remote Kick-Start Utilit y
The first step in configuring one or more NAS appliances remotely is to start the Remote
Kick-Start utility on another system. On a system running Microsoft Internet Explorer 5.0
or higher or Netscape 6.0 or higher, perform the following steps:
1
Insert the Resource CD into the CD drive.
The Resource CD main menu should appear automatically. If it does not, double-click
My Computer on the desktop, right-click the CD drive, and click Autoplay.
2
On the main menu, click Dell OpenManage Kick-Start or click the Kick-Start tab.
1-8
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Click Dell OpenManage Kick-Start 2.1.
A confirmation message that asks whether you want to grant permission for a Java
applet from Dell to access your system.
Click Yes or Grant, depending on your browser, to grant permission so you can
complete the remaining configuration tasks.
The Kick-Start window appears where you can create, view, and save configurations by
name. You can then apply them to selected NAS appliances that have been discovered
on the network or save the configurations on a diskette or on your local hard-disk drive.
The following procedures explain how to perform these tasks.
Creating Configurations
After you start the Kick-Start utility, you are ready to prepare the configuration information
that you will apply to one or more NAS appliances. This process works the same way,
whether you apply this data using a diskette or using an IP network.
You can save configurations by name and assign them an order within a named set, such as
config001, config002, and so on. Also, you can view or edit configurations.
To prepare configuration information, perform the following steps:
1
2
3
Double-click Defined Configurations.
Click PowerVault NAS Appliance.
Click New in the Remote Kick-Start window. The Configurations List changes to
display the Configuration Form.
4
Select or type the following configuration information:
•
Configuration Name — Each configuration file you create must have a name.
Using the + (plus) and – (minus) buttons beside the name, you can change the
three-digit number that is appended to this name. This number lets you create an
ordered set of configuration files on a diskette. An ordered set of configuration files
on the diskette can be used to apply configurations in sequence to a group of NAS
appliances.
•
•
Time Zone — You can change the time zone by selecting an entry from this list.
This is a required field.
Language — You can change the default system language and locale by selecting a
language in the drop-down list. This is a required field.
NOTE: This change does not install the Multilanguage User Interface (MUI). To install the
MUI or other languages than those that are listed in the Kick-Start menu, use the
Localization CD.
Introduction
1-9
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The Kick-Start utility Ethernet 0 matches Windows Local Area Connection, and
Ethernet 1 matches Local Area Connection 2.
•
•
Ethernet Port 0 — This port is the built-in Ethernet port on your system closest
to the outside edge of the system. You can optionally enter the IP address
information for this port. Enter the IP address, subnet mask, and the default
gateway IP address. Kick-Start ensures that you have entered all portions of an IP
address and checks for a valid IP subnet mask. (Optional field — If you do not
complete this field, the system will use DHCP to try to obtain an IP address.)
Ethernet Port 1 — This port is the built-in Ethernet port on your system farthest
from the outside edge of the system. You can optionally enter the IP address
information for this port. Enter the IP address and subnet mask. The gateway IP
address is optional. Kick-Start ensures that you have entered all portions of an IP
address and checks for a valid IP subnet mask. (Optional field — If you do not fill
in this field, the system will use DHCP to try to obtain an IP address.)
•
•
DNS IP Addresses — You can optionally enter one or two DNS IP addresses.
Kick-Start ensures that you have entered all portions of an IP address.
Host/Machine Name and Domain — The host/machine name is required. It is
composed of a base host name and a DNS Domain name. Domain indicates a
DNS domain (for example, dell.com) and does not indicate a Windows domain.
The domain name is optional.
•
•
Administrator Password — This field is required. You must enter the
administrator password twice, and it must be at least six characters long. For
security purposes, the password does not appear on the screen, but each character
of the password shows an asterisk (*) placeholder.
User Name and Password — You can optionally enter a user login name and
password (enter the password twice). For security purposes, the password will not
be seen on the screen, but each character of the password will display as an asterisk
(*). Passwords of less than six characters will not be accepted.
5
6
Click Save when you finish.
Repeat this process to create and save another configuration if you want to configure
more than one NAS appliance. Click the + or – buttons to increment or decrement
the series number at the right of the configuration name to create an ordered set that
use the same name.
You are ready to apply the configuration to the NAS appliance either using an IP
network connection or by saving the configurations on a diskette.
1-10
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring NAS Appliances Over an IP Net work
If you are configuring multiple NAS appliances on the same IP subnet as the system you use
to run Remote Kick-Start, this is probably the fastest configuration method. After starting
the Remote Kick-Start utility and creating configurations, perform the following steps:
1
Select the NAS appliance you want to configure from the Discovered Dell Systems
List. If it does not appear, scroll down and click the Integrated DHCP Server check
box and wait a few seconds for the system to be assigned a temporary IP address and
discovered by Remote Kick-Start.
NOTE: You must configure the DHCP scope before using the embedded DHCP server. See
"Using the Integrated DHCP Server" in the Kick-Start online help for more information
about configuring the DHCP scope.
2
3
Select an existing configuration file from the list.
Click a NAS appliance in the Discovered Dell Systems List, and click Apply. If the
configuration was successful, the status of the NAS appliance in the Remote
Kick-Start window changes to Configured (a check mark icon).
NOTE: If more than one Remote Kick-Start utility runs on your network, you can reserve
the right to configure a system by locking it first. To do this, select the system in the
Discovered List and click Lock.
Configuring NAS Appliances Using a Kick-Start Disket te
If the NAS appliance is not on an IP network, you might prefer to create the configuration
on a diskette. If you want to configure several NAS appliances with a single diskette, create
an ordered set of configuration files on the diskette, then you can use that diskette locally at
each system to configure it.
After starting the Remote Kick-Start utility and creating configurations, perform the
following steps on the system where you have been running Remote Kick-Start:
1
Insert your Kick-Start diskette into the diskette drive of the system where you created
your configurations.
2
Select the configurations you created and saved in the Configurations List and click
Write Diskette.
Applying Configurat ion Informat ion Using a Kick-St art Disket t e
After you have created configuration files on a Kick-Start diskette, you can use the diskette
to set up one or more NAS appliances. The Kick-Start utility uses an automatic reading and
loading sequence that is especially useful for setting up headless NAS appliances.
Introduction
1-11
Download from Www.Somanuals.com. All Manuals Search And Download.
When you insert the configuration diskette into a NAS appliance diskette drive, Kick-Start
looks for configuration files on the Kick-Start diskette. If a configuration file is found, a
20-second countdown timer begins. If the keyboard or mouse are inactive during the
Kick-Start looks for the configuration files on the diskette. If found, it selects and applies a
configuration to the NAS appliance, AND then marks the file as having been applied.
Configuration files for NAS appliances have a .nas file extension. For more information
about the multiple configuration feature, see “Notes on NAS Appliance Multiple
Configuration Files.”
The Kick-Start utility skips files marked Applied the next time you use the diskette to
configure a system and advances to the next nonapplied file in the list.
To set up one or more NAS appliances, perform the following steps:
1
2
Turn on your NAS appliance.
Insert the configured Kick-Start diskette into the diskette drive of the first NAS
appliance you want to set up.
For the first 30 seconds, the diskette drive light turns on and indicates that the
diskette drive is active while Kick-Start reads and loads a configuration file for the NAS
appliance. When the drive light turns off for more than 30 seconds, Kick-Start has
finished applying the configuration.
The NAS appliance automatically reboots.
3
If you customized the Kick-Start diskette to contain multiple configurations, go to the
next NAS appliance and repeat steps 1 and 2.
Method 2: Configuring a NAS Appliance Locally
This section describes how to enter configuration information locally on a NAS appliance.
You do not need a Kick-Start diskette for this method.
NOTE: Configuring the NAS appliance locally requires a keyboard and monitor. A mouse is
optional, but it can be used in this procedure for simplicity.
Connect a monitor, keyboard, and mouse to your NAS appliance, and then perform the
following steps:
1
Start your NAS appliance.
The Kick-Start window appears, prompting you to either insert a configuration
diskette or click Enter Configuration Information to directly configure the server. On
the left side of the screen you may select from the available languages.
1-12
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Click Enter Configuration Information.
Select the items you want to configure and click Next.
Your choices are:
•
•
Ethernet port 0
Ethernet port 1
NOTE: The Kick-Start utility Ethernet 0 matches Windows Local Area Connection, and
Ethernet 1 matches Local Area Connection 2.
•
•
Domain name server (DNS)
Host/system name and domain (domain is a DNS Domain, not a Windows
domain. For example, www.dell.com.)
•
•
Administrator password
User name and password
NOTE: The user you set up in this step does not have administrator privileges.
4
5
Type your configuration information into the provided text boxes and click Next.
Click Yes when prompted to apply your configuration settings to this system.
After a 10–15 second delay, your NAS appliance reboots when the configuration
process is complete. At the prompt, you can log in as administrator with the password
you specified in step 3.
Notes on NAS Appliance Multiple Configuration Files
Using Remote Kick-Start, you can create multiple configuration files on the Kick-Start
diskette. At the top of each configuration form, a Configuration Name field appears. You
can use this field to enter information that helps you identify a particular machine, such as,
rack1-slot2, netserver-1, and so on.
Using the + (plus) and – (minus) buttons next to this field, you can change the three-digit
number that Remote Kick-Start appends to the configuration name. The name of the
configuration file is formed by appending this three-digit number at the end of the
configuration name. Files with the same name but a different three-digit number are called
an ordered set.
The configuration process uses the three-digit number at the end of the filename to
determine which configuration to apply next. Because names of the configuration files are
important to the configuration process, you must not alter the configuration filenames after
they are written to the diskette.
Introduction
1-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not save more than one ordered set of configuration files on a single diskette, which
creates more than one file with the same three-digit number. Kick-Start uses these
three-digit numbers exclusively to decide which configuration to apply next. Thus, putting
multiple configuration sets on a single diskette prevents you from knowing which
configuration you are applying.
For example, if the Aaaa# 001.nas and Bbbb# 001.nas files are both stored on the same
configuration diskette, there is no guarantee that Aaaa# 001.nas will be applied first (even
though it is alphabetically first).
Disabling the Kick-Start Utility
If you do not use Kick-Start to configure your system, you must disable Kick-Start
immediately. If Kick-Start is enabled, the system logs in automatically as administrator,
which creates a security risk. Kick-Start also takes up system resources by constantly
checking for configuration information.
To disable Kick-Start, perform the following steps:
1
2
3
4
From the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log onto the system as an administrator.
Click the X on the top, right-hand corner of the Kick-Start window.
A Warning window displays that asks whether you want the Dell OpenManage
Kick-Start configuration tool to run automatically each time the machine starts.
5
Click No. If you click Yes, Kick-Start closes; however, it will run again the next time
the system is rebooted.
1-14
Int roduction
Download from Www.Somanuals.com. All Manuals Search And Download.
The Dell™ PowerVault™ NAS Manager is a Web-based user interface that is the primary
way to configure NAS appliances. This chapter describes basic navigation of the NAS
Manager. See “How To Find Online Help” for more information.
NOTE: To use the NAS Manager you must be logged in as Administrator. The NAS Manager
default administrator user name is administrator and the default password is
powervault.
Basic Navigation
The NAS Manager displays when you access a PowerVault 750N or 755N system from a
Microsoft® Internet Explorer 5.0 or later (or for Red Hat Linux only, Netscape Navigator
6.0 or later) Web browser.
®
NOTE: Microsoft Internet Explorer 4.0 may be used only in Windows NT 4.0 with Service
Pack 4 or later. All other browsers are not supported.
When navigating the NAS Manager, use the browser buttons to go backward and forward.
In addition, there are two associated menu bars.
The top of each page of the interface is composed of a status area, as well as primary and
secondary menu bars. The body of each page of the Web user interface (UI) is composed of
the content area.
Status Area
The following information displays from left to right:
•
Logo
–
Clicking the logo sends you to http://support.dell.com.
•
•
System host name
System status
The status might be:
–
–
–
–
Normal (green text)
Informational (grey text)
Warning (yellow text)
Critical (red text)
Clicking Status: < status type> sends you to the Messages page.
•
Microsoft Windows® Powered logo
2-2
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Bar
The main menu bar has the following tabs:
•
•
•
Home — Provides links to the other tabs.
Network — Provides access to basic network setup tasks such as changing passwords.
Disks — Allows you to configure disks and volumes, set disk quotas, and take
persistent images.
•
Services — Enables you to manage services such as network file system (NFS) and file
transfer protocol (FTP).
•
•
•
Users — Enables you to manage local users and groups.
Shares — Enables you to manage local folders and create or modify file shares.
Maintenance — Allows you to perform maintenance tasks such as backup and restore,
check logs, and access the Terminal Services Advanced Client.
•
Help — Provides access to Windows Help for network attached storage.
How To Find Online Help
There are two kinds of help available to you through NAS Manager. The NAS Manager
Online Help documents NAS Manager content. The Windows 2000 Help, which you can
access through the Terminal Services on the Maintenance page, documents Windows 2000
content.
To access help in the NAS Manager, select one of two methods:
•
•
When you click Help on the primary menu, the NAS Manager screen is replaced by a
split-screen Help screen that has the Table of Contents of help topics on the left, and
the topic content on the right.
Click the ? icon at the far right of the primary menu to access the context-sensitive
help topic related to the page you are on.
In addition to the Online Help for your system, you can also access help for Microsoft
Windows 2000 through Terminal Services.
To start Windows 2000 Help, perform the following steps:
1
2
3
On the NAS Manager main menu, click Maintenance.
Click Terminal Services.
Log into the system.
NAS Ma na ger
2-3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Perform one of the following procedures:
•
•
From the Start menu, click Help.
On the Advanced Administration Menu, click Administrative Tools and then
click Windows Powered Help.
Using Shares
A folder on your NAS appliance can be shared with other systems on the network, whether
those systems are running a Microsoft Windows operating system or a Unix operating
system.
A NAS appliance supports the following methods of sharing folders:
•
CIFS — The Common Internet File System protocol is used by clients running a
Windows operating system.
•
•
NFS — The Network File System protocol is used by clients running UNIX®.
AppleTalk — The Appletalk protocol is used by clients running a Macintosh operating
system.
•
•
NCP (Novell® NetWare®) — The NCP protocol is used by NetWare clients.
FTP — The File Transfer Protocol is an alternative way of accessing a file share from
any operating system.
•
HTTP — The Hyptertext Transfer Protocol is the protocol for accessing a file share
from Web browsers.
When you create a share on the appliance, you can enable any or all of the listed protocols.
You can add and manage shares from the NAS Manager.
Managing Shares
The Shares page allows users to create, open, delete, or configure a variety of network
folders. The Shares page displays a Shared Folders table that has the following columns:
•
•
Share Name lists each shared folder by name.
To create, open, delete, or configure the properties of a given share, click the radio
button next to the name of the share you want to modify.
Share Path displays the share path.
2-4
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Type indicates the share type:
–
–
–
–
–
–
W = Windows (CIFS)
U = UNIX (NFS)
F = FTP
H = HTTP
A = Apple (AppleTalk)
N = NetWare (NCP)
•
•
Comment displays a brief description of the share, if one has been provided.
Tasks lists the tasks that can be performed for each selected item.
Use this table to select a share, and then click the task you want to perform from the Tasks
list (located to the right of the table).
Adding a Share
To create a share, you must supply a share name (the name of the directory on the NAS
appliance that is to be shared) that is unique from all other shares on the system. Some
protocols also support the inclusion of a comment or brief description of the share.
Additionally, you must enable at least one of the available protocols.
Although a single user interface is provided for creating a share for all protocols, it actually
creates a separate share for each protocol. You can remove a share for one protocol without
removing the share for the other protocols; however, this process can be quite confusing.
Therefore, it must be done carefully.
NOTICE: Do not create any data shares on the operating system hard-disk drive. Using the
Reinstallation CD will destroy all data on the operating system hard-disk drive.
To add a share, perform the following steps:
1
2
3
On the NAS Manager primary menu, click Shares.
In the Tasks list on the Shared Folders page, click New.
On the General tab, enter the Share Name, Share Path, (and if desired) a brief
description of the share in the Comment field.
NOTE: The Comment field is ignored for NFS, FTP, and HTTP shares.
4
Check the appropriate box(es) to specify which types of protocols to enable. The
available options are: Microsoft Windows (CIFS), UNIX (NFS), Novell NetWare,
Apple Macintosh, FTP or HTTP
NAS Ma na ger
2-5
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Use the protocol tabs to configure the specific properties of each type of share.
NOTE: Services for NetWare (SFN) are compatible with Novell NetWare Bindery service
for authentication and file access using the internetwork packet exchange/sequenced packet
exchange (IPX/SPX) network protocol. You must log into the NAS appliance using a
Netware client before you can connect to the NetWare shares.
Modifying Share Properties
Use the Shares page to view and modify share properties.
To modify share properties, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Shares.
On the Shares page, click Shares.
In the Object/Task Selector, select the share for which the properties will be modified.
On the Shared Folders page, in the Tasks list, click Properties.
The General property page is displayed. Use this page to change the name, path, and
description of the share. You can also select the type of client from which the share is
accessible.
Removing a Share
You can remove shares entirely, or you can disable one or more protocols. When you remove a
share, access to the share is removed; however, the actual files remain on the NAS appliance.
To remove a share and all protocols for that share, perform the following steps:
1
2
3
On the NAS Manager primary menu, click Shares.
On the Shares page, click Shares.
In the Shared Name list on the Shared Folders page, select the share that is to be
removed.
4
5
In the Tasks list on the Shared Folders page, click Delete.
A confirmation dialog appears.
Click OK to confirm the deletion, or click Cancel to keep the share.
Removing a Protocol From the Share
To remove one or more specific protocols from a share, perform the following steps:
1
On the NAS Manager primary menu, click Shares.
2-6
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
On the Shares page, click Shares.
In the Shared Name list on the Shared Folders page, select the share for which you
want to modify properties.
4
In the Tasks list on the Shared Folders page, click Properties.
The General property page is displayed.
5
6
Uncheck the protocol(s) to remove from the share.
Click OK to confirm the removal, or click Cancel to keep the protocol(s) for the share.
Using the PowerVault Advanced Administration
Menu
The PowerVault Advanced Administration Menu is a software application that is installed
on your NAS appliance. It provides links to common administrative tools for your appliance.
This menu automatically runs when you access the Terminal Services Advanced Client.
The Advanced Administration Menu provides the following information:
•
Administrative Tools — Provides a list of tools that you can use to monitor the status
of and to perform administrative tasks on your NAS appliance.
•
System Management — Provides a list of tools that you can use to manage your NAS
appliance.
•
•
Logoff — Ends the Terminal Services Advanced Client session
Exit — Exits the PowerVault Advanced Administration Menu and returns you to the
NAS Manager desktop.
To access the Advanced Administration menu, perform the following steps:
1
2
From the NAS Manager, click Maintenance.
Click Terminal Services and log on to the appropriate system. The PowerVault
Advanced Administration Menu displays.
3
4
Click Administrative Tools or System Management to display the list of selectable
options.
Click the desired tool or setting. (See “Retrieving Your Service Tag” for an example of
a system setting you can obtain using this procedure.)
NAS Ma na ger
2-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Retrieving Your Service Tag
1
On the Advanced Administrative Menu, click Administrative Tools to present the list
of options.
2
Click Retrieve Dell Service Tag to display the service tag of the NAS appliance.
Disk Quotas
Disk quotas track and control the use of disk space for volumes. You can configure the
volumes on your NAS appliance to do the following:
•
•
Prevent further disk space use and log an event when a user exceeds a specified disk
space limit.
Log an event when a user exceeds a specified disk space warning level.
When you enable disk quotas, you can set both the disk quota limit and the disk quota
warning level.
•
•
The disk quota limit specifies the amount of disk space a user is allowed to use.
The warning level specifies the point at which a user is nearing his or her quota limit.
For example, you can set a user's disk quota limit to 50 megabytes (MB), and the disk quota
warning level to 45 MB. With these settings, the user can store no more than 50 MB on the
volume. If the user stores more than 45 MB on the volume, you can set the disk quota
system to log a system event to the event log.
In addition, you can specify a quota limit for the users but let the users exceed that quota
limit. Enabling quotas and not limiting disk space use is useful when you want to track disk
space use on a per-user basis, but do not want to deny users access to a volume when they
exceed that limit. You can also specify whether or not the system should log an event when
a user exceeds either their quota warning level or their quota limit.
Enabling Disk Quota Management
To enable or disable quota management on a volume, perform the following steps:
1
2
3
4
On the primary menu of the NAS Manager, click Disks.
Click Disk Quota.
On the Volumes and Quotas page, select the volume to manage.
On the Tasks list, select Quota.
2-8
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
On the Default Quota for volume page, click the appropriate check box to enable or
disable quota management.
Select the desired quota size and settings for this volume.
Adding Disk Quota Entries
The Quota Entries page allows you to add, delete, or configure disk quotas for any user of
the NAS appliance.
When you enable disk quotas for an existing volume, volume usage is automatically tracked
for new users from that point on. However, existing volume users have no disk quotas
applied to them. You can apply disk quotas to those existing volume users by adding new
quota entries in the Quota Entries window.
To add a new quota entry, perform the following steps:
1
2
3
4
5
6
On the NAS Manager primary menu, click Disks.
On the Disks page, select Disk Quota.
On the Disk Quota page, select the volume to manage.
From the Tasks list, select Quota Entries.
On the Tasks list, select New….
Select a local user from the list box, or type the name of a domain account in the text
box (using the < domain name\user name> ).
7
8
To allow unlimited disk space usage, click the Do not limit disk usage radio button.
Otherwise, go to step 8.
To limit disk space, perform the following procedure:
a
Click the Limit disk space to radio button.
b
In the text box, enter a numerical value to specify the amount of disk space to
assign to a particular user or group. Use the drop-down box to indicate kilobytes
(KB), megabytes (MB), gigabytes (GB), terabytes (TB), petabytes (PB), or
exabytes (EB).
c
Enter the amount of disk space which, when filled, will trigger a warning to the
user or group member that the used disk space is near the disk capacity limit. Use
the drop-down box to indicate KB, MB, GB, TB, PB, or EB.
9
Click OK.
NAS Ma na ger
2-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Modifying Quota Properties
1
2
3
4
5
On the NAS Manager primary menu, click Disks.
On the Disks page, select Disk Quota.
On the Disk Quota page, select the volume to manage.
From the Tasks list, select Quota Entries.
On the Quota Entries page for the selected volume, select a user account from the
Logon name field of the Object/Task Selector.
6
7
On the Tasks list, click Properties.
On the Quota entry for user page, perform one of the following procedures:
•
•
a
b
To allow unlimited disk use, click the Do not limit disk usage radio button.
To limit disk space, perform the following procedure:
Click the Limit disk space to radio button.
In the text box, enter a numerical value to specify the amount of disk space to
assign to a particular user or group. Use the drop-down box to indicate KB, MB,
GB, TB, PB, or EB.
c
Enter the amount of disk space which, when filled, will trigger a warning to the
user or group member that the used disk space is near the disk capacity limit. Use
the drop-down box to indicate KB, MB, GB, TB, PB, or EB.
8
Click OK.
Removing Disk Quota Entries
1
2
3
4
5
On the NAS Manager primary menu, click Disks.
On the Disks page, select Disk Quota.
On the Disk Quota page, select the volume to manage.
From the Tasks list, select Quota Entries.
On the Quota Entries page, select the Logon name from which you want to remove
the quota entry.
6
7
On the Tasks list, select Delete.
Click OK.
2-10
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Logs
A log file is a file that stores messages, which are sometimes called events or event log
entries, generated by an application, service, or operating system. These messages are used
to track the operations performed by the system. Log files are usually plain text (ASCII)
files and usually have .log extensions.
You can use the PowerVault NAS Manager to access these log files to monitor the operation
of your system.
Managing Logs
You can use the Logs feature to download, view, clear, and configure several types of event
logs that are provided by the system. The available logs are as follows:
•
•
•
•
•
•
•
Application log
FTP log
NFS log
Security log
System log
Web (HTTP) shares log
Web administration log
Downloading Log Files
The Download Log Files page on the NAS Manager allows you to download specific log
files to your NAS appliance.
1
2
3
4
5
6
On the PowerVault NAS Manager primary menu, click Maintenance.
On the Maintenance page, click Logs.
On the Logs page, select the type of log you want to download.
In the Tasks list on the Log Type Log page, click Download.
In the File Download dialog window, select Save this file to disk.
Click OK to download the log file.
NAS Ma na ger
2-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Downloaded Log Files
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
On the Maintenance page, click Terminal Services.
Log in to a Terminal Services Advanced Client session.
On the Terminal Services desktop, right-click My Computer and select the Manage
pop-up menu item.
The Computer Management window opens.
5
6
In the left column of the Computer Management window, select Event Viewer.
In the right column of the Computer Management window, select the log you want to
view.
Viewing Log Entry Details
You can view details such as the date, time, source, event ID, description, and data of
specific log files.
1
2
3
4
5
6
On the NAS Manager primary menu, click the Maintenance tab.
On the Maintenance page, select Logs.
On the Logs page, select the type of log you want to view.
Click the radio button next to the log entry you want to view.
In the Tasks list, click Event Details.
On the Log Details page, click the Up and Down buttons to scroll through the log
files.
7
Click Back to close the Log Details page and to return to the log entry list on the Logs
page.
Modifying Log Properties
You can specify the maximum log size and determine how the system will handle log entries
when the maximum capacity of the server appliance is reached. To modify the properties of
a log file, perform the following steps:
1
2
3
On the PowerVault NAS Manager primary menu, click Maintenance.
On the Maintenance page, click Logs.
On the Logs page, select the type of log you want to configure.
2-12
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
In the Tasks list, click Log Properties.
In the Maximum log size text box on the Log Properties page, enter the maximum
size (in kilobytes) of the log.
6
Determine how you want the system to handle log file entries after the maximum log
file size has been reached, and click one of the following choices:
•
Overwrite events as needed — The system writes over older events with new
events as they occur.
•
Overwrite events older than ____ days — The system retains the event entries for
the specified number of days before the events can be written over by current
event entries.
•
Do not overwrite events — The system retains all events in the log and appends
new events to the end of the file.
Clearing Log Files
You can clear specific log files by performing the following steps:
1
2
3
4
5
On the NAS Manager primary menu, select Maintenance.
On the Maintenance page, select Logs.
On the Logs page, select the type of log you want to clear.
In the Tasks list, click Clear Log.
On the Clear Log page, click OK to clear the log.
Using Other Languages
The NAS Manager is available in English and Japanese. To change the NAS Manager
language, perform the following steps:
1
2
3
On the NAS Manager primary menu, select Maintenance.
On the Maintenance page, click Language.
Click the radio button next to the desired language. (For example, click the radio
button for Japanese if you want to use Japanese.)
4
Click OK.
NAS Ma na ger
2-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Shutting Down the NAS Appliance
You can shut down, shut down and restart, or schedule a shut down of the NAS appliance
from the NAS Manager by performing the following steps:
1
2
3
4
On the NAS Manager primary menu, select Maintenance.
On the Maintenance page, click Shutdown.
Click the action you want to perform.
For Shut Down and Restart, proceed to step 5. For Scheduled Shutdown, specify
when the shut down should occur and click OK.
5
On the Confirmation page, click OK to confirm the action.
If you selected to restart the NAS appliance, the Restarting page displays.
NOTE: While the Restarting Page is displayed, the NAS Manager checks periodically to
determine whether the appliance is back online. If the NAS Manager detects that the
appliance has come back online, it automatically returns the NAS Manager to the home
page.
The NAS Manager allows you to perform the most often used volume management tasks on
the external disk arrays. With the NAS Manager, you can create, delete, and expand external
volumes.
NOTE: For managing internal hard-disk drives and to perform advanced tasks on your external
disk arrays, see “Advanced Disk and Volume Management Using Array Manager.”
Creating a Volume
When you create a new volume, you must select a minimum of three disks. The new
volume is created with RAID 5 fault tolerance.
NOTE: The maximum supported volume size is 2 TB.
To create a new volume, perform the following steps:
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select Volumes.
In the Tasks list, click New....
2-14
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
4
In the Adapter column of the Configure, create, or delete volumes page, select the
adapter you wish to create the volume on by clicking the appropriate radio button.
5
6
In the Tasks list, click Select....
Select the disks to be used for the new volume and then click OK.
NOTE: You cannot expand an internal RAID group.
This option prepares a volume to be expanded. The new volume retains the same fault
tolerance level. During reconstruction, the original volume is still accessible. This option is
not available after the volume has been prepared for expansion.
NOTE: See “Advanced Disk and Volume Management Using Array Manager” for advance
operations on all RAID controllers.
To prepare a volume to expand, perform the following steps:
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select Volumes.
In the Volumes column of the Configure, create, or delete volumes, select the volume
to prepare for expansion by clicking on the adjacent radio button.
4
5
6
On the Tasks list, click Prep Expand....
Select the disks you want to add to this volume.
Click OK.
The RAID status changes to show the process is occurring. When completed, the volume is
ready to expand.
NOTE: This process may take several hours to complete.
Expanding a Volume
NOTE: You cannot expand an internal RAID group.
After a volume has been prepared to expand, the RAID status is marked as Ready to
Expand.
NOTE: See “Advanced Disk and Volume Management Using Array Manager” for advanced
operations on all RAID controllers.
NAS Ma na ger
2-15
Download from Www.Somanuals.com. All Manuals Search And Download.
To expand a volume, perform the following steps:
1
2
3
On the PowerVault NAS Manager primary menu, select Disks.
On the Disks page, select Volumes.
In the Volumes column of the Configure, create, or delete volumes, select the volume
to expand.
4
5
On the Tasks list, click Expand....
Click OK.
Deleting a Volume
NOTICE: You must delete all shares and persistent images from your volume before deleting it.
If a volume is removed before all shares of that volume have been removed, the NAS Manager
might not display shares correctly.
When you delete a volume, the operation can not be undone. All the data in the volume
will be lost.
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select Volumes.
In the Volume column of the Configure, create, or delete page, select the volume to
be deleted by clicking the adjacent radio button.
4
5
6
In the Tasks list, click Delete....
Click OK.
On the confirmation page, click OK to continue or Cancel to abort the operation.
Viewing Volume Properties
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select Volumes.
In the Volumes column of the Configure, create, or delete volumes, select the volume
for which you want to view properties.
4
5
On the Tasks list, click Properties....
Click OK to return to the Volume list.
2-16
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
The NAS Manager allows you to perform the most often used disk management tasks on
the external disk arrays. With the NAS Manager, you can list available disks, rescan for disks,
create a hot spare, free a hot spare, and force a disk online.
NOTE: See “Advanced Disk and Volume Management Using Array Manager” for advance
operations on all RAID controllers.
Listing Available Disks
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
On the Tasks list, click Select....
A page titled with the adapter name that contains a list of disk drives displays.
Rescanning for Disks
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
5
In the Tasks list, click Select....
In the Tasks list on the adapter page, click Rescan....
Creating a Hotspare
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
In the Tasks list, click Select....
NAS Ma na ger
2-17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
In the Physical Disks column of the adapter page, select the disk to use to create a
hotspare.
In the Tasks list on the adapter page, click Make Hotspare....
Freeing a Hotspare
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
5
6
In the Tasks list, click Select....
In the Physical Disks column of the adapter page, select the hotspare disk to free.
In the Tasks list on the adapter page, click Free Hotspare....
Forcing a Disk Online
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
5
6
In the Tasks list, click Select....
In the Physical Disks column of the adapter page, select the disk to force online.
In the Tasks list on the adapter page, click Force Online....
Viewing Disk Properties
1
2
3
On the NAS Manager primary menu, select Disks.
On the Disks page, select the Disks.
In the Adapter column on the Configure, create, or delete volumes page, select the
adapter to list disks for by clicking the adjacent radio button.
4
5
6
In the Tasks list, click Select....
In the Physical Disks column of the adapter page, select the disk to force online.
In the Tasks list on the adapter page, click Properties....
2-18
NAS Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Although the Dell OpenManage™ Array Manager provides a comprehensive solution to
storage management, you should use it only for advanced features that cannot be performed
from the Disks tab in the NAS Manager. You can access the Array Manager through the
Terminal Services Advanced Client in the NAS Manager.
Array Manager allows you to configure your storage devices and the logical volumes
contained in your system. Array Manager displays storage configuration in both a physical
and a logical view. The physical view shows the physical connections between the storage
devices. The logical view shows a logical representation of your storage as logical volumes.
Array Manager provides a single console for array and volume configuration, from which
you can do the following:
•
•
Manage the hardware redundant array of independent disks (RAID) solution
Display all of your storage information in a graphical environment
Array Manager Common Tasks
This section provides a high-level description of the most common procedures performed
under Array Manager.
Creating a New Volume
1
2
3
4
5
Create a RAID 5 virtual disk from the available pool of physical drives.
Write a signature to the disk created.
Upgrade the disk to dynamic.
Create a new volume on the upgraded disk.
Assign the next available drive letter and format the volume NT File System (NTFS).
NOTE: The PowerVault 750N and 755N only support NTFS partitions. Formatting all
partitions as NTFS allow for advanced features only available under that file system.
Deleting an Existing Volume
1
2
3
4
Select and delete the desired volume.
Revert the disk that contained the volume to a basic disk.
Determine the virtual disk that corresponds to the basic disk.
Delete that virtual disk.
3-2
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Expanding an Existing Volume
1
2
Find the virtual disk that corresponds to the volume you are going to expand.
Add a member to that virtual disk.
NOTE: After adding a member to a virtual disk, the virtual disk is reconstructed by the
adapter. This operation will take several hours.
3
4
After the virtual disk has completed the reconstruction process, perform a rescan.
Extend the specified volume with the new space available to the virtual disk.
Array Manager Console
The Array Manager console display uses a tree view to display storage objects in the left
pane of the window, and tabbed views in the right pane to display additional information on
storage objects. The following sections provide more information about the left and right
panes.
Left Pane
The left pane shows the objects detected by the Array Manager software. The major storage
objects are the local computer object, arrays, disks, and volumes. By clicking the plus sign
(+ ) in front of a storage object, you can see the subordinate storage objects under that
object.
•
•
•
•
Arrays represent the physical and logical storage subsystems connected to RAID
controllers.
Disks represent the disks recognized by the Microsoft® Windows® Powered operating
system.
Volumes include dynamic RAID volumes created in Array Manager, primary and
extended partitions, logical drives associated with extended partitions.
My Network Places, History, and Favorites provide remote connection functionality
not supported by the PowerVault 750N and 755N systems and should be ignored.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Right Pane
The right pane identifies the various objects and their status, and displays any error
conditions that might exist. The four tabbed views in the system’s right pane console view
include the following:
•
The General tab displays parameters based on the objects you select in the console's
tree view. The parameters are as follows:
–
–
Name is the name of the object.
Status can vary, depending on the object. Common status conditions are Online,
Healthy, and Resynching.
–
–
–
–
–
Type identifies the object, such as Array Disk.
Disk Group shows an entry for disks in a basic or dynamic group.
Capacity is the maximum size of the disk.
Unallocated Space is the amount of free hard-disk space still available.
Graphical Layout is a graphical representation of how much of the disk is being
used.
–
–
Progress shows the current progress (percentage of completion) for tasks.
Device is the type of disk: small computer system interface (SCSI), integrated
drive electronics (IDE), and so on.
–
Port identifies the controller card. A SCSI port has zero or more target IDs, and a
target ID has one or more logical unit numbers (LUNs).
–
–
–
LUN is the logical unit number.
Target is the SCSI ID, which uniquely identifies the disk on the controller card.
Vendor identifies the vendor on hardware objects.
•
•
The Events tab displays event log messages associated with storage objects.
The Disk View tab displays a graphical layout of the disks on your system, including
CD or other removable media.
•
The DM View tab is grayed-out on the Array Manager console.
Launching Array Manager From the NAS
Manager
NOTE: To use the NAS Manager you must be logged in as Administrator. The NAS Manager
default administrator user name is administrator and the default password is
powervault.
3-4
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
You can launch the Array Manager from the NAS Manager
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log into the Terminal Services session.
From the Advanced Administration Menu, click Disk Management under System
Management.
Managing Disk Arrays
This section describes how to configure and manage arrays with the Dell™ PowerEdge™
Expandable RAID Controller 3/Dual Channel (PERC 3/DC) and PERC 3/QC controllers
that are included with the PowerVault 750N or 755N NAS appliance. The PERC 3/DC and
PERC 3/QC controllers are high-performance intelligent PCI-to-SCSI host adapters with
RAID capabilities. Each channel supports SCSI data transfer rates of up to 160 megabytes
(MB) per second per channel. You can create a maximum of 40 virtual disks per controller.
The following topics are discussed:
•
•
•
•
Recommended virtual disk configuration
Creating virtual disks
Deleting virtual disks
Reconfiguring and managing virtual disks
Recommended Virtual Disk Configuration
It is recommended that each virtual disk created on your system's external SCSI enclosures
contain 11 physical drives and be configured as a RAID-5 virtual disk. Virtual disks
configured in this manner are optimized by the PERC 3/DC or PERC 3/QC adapter to
provide the best performance. You are also recommended to assign a global hotspare within
the same enclosure for each virtual disk.
Creating Virtual Disks
NOTE: The maximum supported volume size is 2 terabytes (TB).
The first step in configuring your system for improved system management is creating
virtual disks.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-5
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: When you create virtual disks, you might want to consider how virtual disks will be
deleted. Virtual disks created on the PERC 3/DC or PERC 3/QC controller must be deleted in
reverse order of their creation. In other words, you must delete the most recently created virtual
disk first and continue to delete in reverse order.
NOTE: To take advantage of all the system features such as Defrag and Encryption, you are
recommended to use the default value of 64 KB for the stripe size when creating a virtual disk.
To create a virtual disk, perform the following steps:
1
2
3
Right-click on an array group.
Click Create Virtual Disk to launch the Create Virtual Disk Wizard.
Read the Welcome screen and click Next to continue.
The Select Creation Mode dialog box displays. You can cancel the operation at any
time by clicking Cancel.
4
5
Select Custom Mode and click Next to continue.
The Select Disks and Virtual Disk Attributes screen displays.
Select the disks and confirm information presented in the wizard.
NOTE: The PowerVault 750N and 755N only supports NTFS partitions. Formatting all
partitions NTFS allows for advanced features only available under that file system.
6
7
Click Next to continue.
The Completing the Create Virtual Disk Wizard dialog box displays.
Click Finish to create a virtual disk or Back to return to the previous screen.
Array Manager confirms the creation of the virtual disk.
The Rescan Disk Layout checkbox is selected by default. Rescan Disk Layout allows
the Microsoft® Windows® Powered operating system to recognize the new virtual
disk. You can perform a Rescan Disk Layout later if the box is not checked when you
create the virtual disk.
Deleting Virtual Disks
Deleting a virtual disk permanently deletes all information contained on that disk. Virtual
disks created on the PERC 3/DC or PERC 3/QC controller must be deleted in the reverse
order that they were created. In other words, the last disk that you created must be deleted
first.
NOTICE: All data on the virtual disk is lost when the disk is deleted.
3-6
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Right-click the last virtual disk that was created.
Click Delete.
A confirmation dialog box appears.
3
Click OK to continue.
The virtual disk disappears from the left pane. If the disk was not the last one created,
the delete option is grayed out.
Reboot your system after deleting a virtual disk and before creating new virtual disks.
Reconfiguring and Managing Virtual Disks
This section summarizes how you can change the virtual disk configuration through the
NAS Manager. The following topics are discussed:
•
•
•
•
•
•
Using add member
Using transform type
Using change policy
Using check consistency
Initializing disks
Properties
NOTE: Because of hardware restrictions, the PERC 3/DC and PERC 3/QC controllers will not
detect a drive status change until you attempt to read from or write to the drive. For example,
when an unconfigured drive is removed, the controller will not detect the change until a you
perform a manual rescan or read/write to the drive.
Using Add Member
Perform the following steps to add array disks to a virtual disk or to change the virtual disk's
RAID level:
1
2
Right-click a virtual disk.
Click Add Member.
A Virtual Disk Add Member dialog box appears. The available disks are listed in the
left pane. You can choose appropriate disks to add by selecting them and using Add
Disk to move them to the right pane.
3
Choose the RAID level in the Virtual Disk Type pull-down menu.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
Click OK to continue or Cancel to cancel the operation.
Add Member shows progress information in the right pane.
To view your progress, click the parent of the virtual disk.
The status of the virtual disk will be Reconstructing, and progress information displays
until the Add Member operation is finished. At the end of the operation, the Type
category shows the changed RAID level.
Using Transform Type
The following is a list of supported RAID level migrations:
•
•
RAID 1 to RAID 0
RAID 5 to RAID 0
To change a RAID level of a virtual disk without adding or removing disks, perform the
following steps:
1
Right-click on the virtual disk whose type you want to transform.
The Virtual Disk Transform Type dialog box appears.
2
3
Select RAID Type or Stripe Size from the available choices.
Click OK to continue or Cancel to quit the operation.
A warning dialog box appears asking if you want to continue.
4
5
Click Yes.
Transform Type displays progress information in the right pane.
To view progress, click the parent of the virtual disk.
The status of the virtual disk will be Reconstructing, and progress information displays
until the operation is finished. At the end of the operation, the Type category shows
the changed RAID level.
Using Change Policy
To change the cache policies of a virtual disk, perform the following steps:
1
2
Right-click a virtual disk.
Click Change Policy.
The Virtual Disk Change Policy dialog box displays.
3-8
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
From the pull-down menu, choose the policies you want.
You can enable or disable the write-cache or enable or disable the read-cache.
Click OK to continue or Cancel to quit the operation.
When you are finished, click Properties to verify if the policy changes occurred.
Using Check Consistency
If your disk is in a degraded state, using Check Consistency might enable you to restore
your disk to Ready status.
To check mirror synchronization and rebuild parity if necessary, perform the following steps:
1
2
Right-click the virtual disk to be checked.
Click Check Consistency.
The Check Consistency operation displays progress information in the right pane.
3
To view progress, click the parent of the virtual disk.
The status of the virtual disk is Resynching, and progress information displays until
the operation is finished.
Initializing Virtual Disks
Initialize any virtual disk before you use it.
Perform the following procedure on any virtual disk on a PERC 3/DC or PERC 3/QC
controller system.
NOTICE: All data on the virtual disk is lost when the disk is initialized.
1
2
Right-click the virtual disk that you want to initialize.
Click Initialize.
The status of the disk displays Initializing in the right pane until the operation is
finished.
Properties
This command displays a window that shows the properties associated with the virtual disk.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Array Disk Commands
This section describes the following commands for working with array disks.
•
•
•
•
•
•
•
•
Format
Rebuild
Assign a global hot spare
Unassign a global hot spare
Online array disk
Offline array disk
Prepare to remove
Properties
Format
The Format command performs a low-level formatting of the array disk. To format the array
disk, perform the following steps:
1
2
Right-click the disk that you want to format.
Click Format.
The right pane shows the status of the format. The status displays Formatting until
the operation is finished.
Rebuild
The Rebuild command is enabled only when a disk is failed. You can rebuild only on failed
disks in redundant arrays (RAID 1 or RAID 5) by performing the following steps:
1
2
Right-click the failed disk that you want to rebuild.
Click Rebuild.
In the right pane, the status of the disk is Rebuilding and a progress bar shows the
percentage of completion.
NOTE: This process may take several hours.
3-10
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Assign Global Hot Spare
A hot spare is an unused backup disk that is part of the array group. Hot spares remain in
standby mode. When an array disk in a virtual disk fails, the assigned hot spare will be
activated to replace the failed array disk without interrupting the system or requiring your
intervention.
You can change the hot-spare disk assignment by unassigning a disk and choosing another
disk to assign, as needed.
To assign a global hot-spare, perform the following steps:
1
2
Right-click the array disk that you want to use as a hot spare.
Click Assign Global Hot Spare.
The Assign Hot Spare dialog box appears.
3
Confirm the successful completion of the operation by checking the properties
displayed in the right pane.
The status of the array disk must be Ready and the type must be Spare Array Disk.
Unassign Global Hot Spare
The Unassign Global Hot Spare command unassigns the hot-spare disk. To unassign the
hot-spare disk, perform the following steps:
1
2
3
Right-click on the disk that is assigned as a hot spare.
Click Unassign Global Hot Spare.
Confirm the successful completion of the operation by checking the properties
displayed in the right pane.
The status of the array disk must be Ready and the type must be Array Disk.
Online Array Disk
You can only set to online an array disk that is part of a virtual disk that has been set to
offline.
1
2
Right-click on the disk that you want to set to online.
Click Online.
In the right pane, the status of the disk is changed from Offline to Online.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Offline Array Disk
You can only set to offline an array disk that is part of a virtual disk that has been set to
online.
1
2
Right-click on the disk that you want to set to offline.
Click Offline.
A confirmation dialog box appears.
3
Click OK to continue.
In the right pane, the status of the disk will be changed from Online to Failed.
Prepare to Remove
Use this procedure to prepare for removing an array disk from a PERC 3/DC or PERC 3/QC
controller.
NOTICE: To prevent data loss, it is recommended that you perform this operation before you
remove any physical disk from an enclosure.
1
2
Right-click on the disk that you want to remove.
Click Prepare to Remove, and then click OK to continue.
When the lights on the disk you have prepared to remove stop blinking, the disk is
ready to be physically removed. The disk will not be listed in the array group.
Properties
Use this command to display the array disk properties.
General Controller Commands
This section describes the general controller operations:
•
•
•
•
•
•
Rescan controller
Flush cache
Enable sound
Disable sound
Rebuild rate
Properties
3-12
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
Rescan Controller
The Rescan Controller command can be used to check whether there are any new disks
that were attached after a configuration was set. To rescan the controller, perform the
following steps:
1
2
Right-click the controller you want to rescan.
Click Rescan Controller.
After the operation is finished, the console is refreshed and the newly attached disks (if
there are any) will appear under the Array Disk Group object and under the controller
object.
Flush Cache
The Flush Cache command forces the PERC 3/DC and PERC 3/QC controllers to write
the contents of cache memory onto the virtual disks. You might want to use this option if
you find your application or disks in an unstable condition.
Enable Sound
The Enable Sound command enables the controller alarm setting. When enabled, the
alarm sounds in the event of a device failure.
To enable the alarm sound, perform the following steps:
1
2
Right-click a controller.
Click Enable Sound.
Disable Sound
The Disable Sound command disables the alarm. If disabled, the alarm does not sound in
the event of a device failure.
To disable the alarm sound, perform the following steps:
1
2
Right-click a controller.
Click Disable Sound.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Rebuild Rate
The Rebuild Rate command changes the rebuild rate settings. The rebuild rate is the
fraction of the compute cycles dedicated to rebuilding failed drives. A rebuild rate of
100 percent means the system is totally dedicated to rebuilding the failed drive.
NOTICE: The default rebuild rate is 30%. System performance might be degraded if you
change the rebuild rate to a higher value than the default.
The PERC 3 rebuild rate can be configured between 0% and 100%. At 0%, the rebuild is
only done if the system is not doing anything else. At 100%, the rebuild rate has a higher
priority than any other system activity.
Properties
The Properties command displays controller attributes.
To view properties, perform the following steps:
1
2
Right-click on the appropriate controller.
Click Properties.
A Controller Properties dialog box appears displaying Name, Vendor, Status, Type,
Firmware Version, and Cache Size of the controller.
Disk Management
This section describes conceptual and procedural information about how Array Manager
implements basic and dynamic disks.
The following topics are discussed:
•
•
•
•
Writing a disk signature
Upgrading a basic disk to a dynamic disk
Reactivating dynamic disks
Merging foreign disks
Writing a Disk Signature
When you create a virtual disk and perform a rescan, the newly created virtual disk appears
under the Disks node. The unsigned disk displays an error bitmap on the icon. The Disk
Type is Unsigned Disk. The unsigned disk cannot be used cannot be used until it has a
signature on it.
3-14
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
To write a disk signature, right-click on the unsigned disk. A menu displays showing the
Write Signature command. (The Write Signature command appears only if a disk does not
have a signature on it.) Select this command to write a signature on the disk.
After a signature is written on a disk, the disk displays as a Basic Disk. You can create
partitions on the basic disk, or you can upgrade the disk to dynamic to create volumes on it.
NOTE: Upgrade all data disks on the system to dynamic before creating any volumes. This
allows the system to support online volume extension. Even though it is possible to upgrade disks
with existing volumes to dynamic, those volumes cannot be extended. Only volumes created on
disks that are already dynamic can be extended.
NOTICE: Because of system recovery limitations, the operating system disk must remain a
basic disk. All other disks should be upgraded to dynamic during creation.
Upgrading a Basic Disk to a Dynamic Disk
Because only dynamic disks can be used for online volume extension, you are recommended
to use Array Manager to upgrade all data disks on your system to dynamic. The upgrade
includes new disks, which are added to the system as basic disks.
NOTICE: Because of system recovery limitations, the operating system disk must remain a
basic disk. Do not upgrade your operating system disk to dynamic.
To upgrade a basic disk to a dynamic disk, perform the following steps:
1
Right-click the disk you want to upgrade and click Upgrade Dynamic Disk.
The Upgrade Disk Wizard provides information about upgrading.
2
Click Next to continue.
You are asked to select the disks to upgrade.
3
4
Add the basic disks you want to upgrade to the list of dynamic disks and click Next.
Click Finish.
NOTE: After a disk is upgraded to dynamic it cannot be reverted back to basic unless all
volumes on that disk are removed. You are strongly recommended not to revert a disk back to
basic after data volumes are present.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Reactivating Dynamic Disks
A dynamic disk might appear as a missing disk when it is corrupted, powered down, or
disconnected. You can reactivate a dynamic disk to bring it back online by performing the
following steps:
1
2
Right-click the disk marked Missing or Offline dynamic disk.
Click Reactivate Disk on the menu.
The disk should be marked Online after the disk is reactivated.
Merging Foreign Disks
Dynamic disks with a foreign status are disks that have been moved from another system.
You cannot reactivate a foreign disk; you must merge the disk to the system. To change the
status of a foreign disk and enable it to be seen as a part of the current system, use the
command Merge Foreign Disk.
Perform the following steps to merge foreign disks:
1
2
From the PowerVault NAS Manager, log on to the Terminal Services Advanced Client.
Launch the Dell OpenManage Array Manager by clicking the System Management in
the Advanced Administration Menu, and then clicking Computer Management.
Foreign disks will appear in the disk list and graphical views as Foreign.
3
4
Right-click a foreign disk and click Merge Foreign Disks.
The Merge Foreign Disk Wizard displays.
Select the foreign disks that you would like to merge to the system.
By default all foreign disks are selected to be merged.
5
6
7
Click Next.
Click Next again to validate the volume status of each foreign disk.
Click Finish.
Volume Management
This section describes conceptual and procedural information about how Array Manager
implements basic and dynamic volumes.
3-16
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
The following topics are discussed:
•
•
•
•
Volume overview
Checking volume properties
Formatting a partition or volume
Deleting a partition or volume
Volume Overview
A volume is a logical entity that is made up of portions of one or more physical disks. A
volume can be formatted with a file system and can be accessed by a drive letter.
Like disks, volumes can be basic or dynamic. In Array Manager, basic volumes refer to all
volumes that are not on dynamic disks. Dynamic volumes are logical volumes created from
dynamic disks with Array Manager.
In your system, create all data volumes and dynamic volumes on dynamic disks. Only the
operating system drive should remain basic because of system recovery limitations.
Checking Partition or Volume Properties
1
2
Right-click the partition or volume to be checked.
Choose Properties from the context menu.
The Properties window displays.
3
Check the properties for your volume.
Formatting a Partition or Volume
1
2
Right-click the volume or partition you want to format and then click Format.
Choose NTFS as the file system type.
NOTE: The PowerVault 750N and 755N only supports NTFS partitions. Formatting all
partitions as NTFS allow for advanced features only available under that file system.
3
4
Enter a label for the volume.
The label appears on the Array Manager console. If a name has been selected, this
name appears in the Name field. You can change the name by typing a different name.
Enter an allocation size or use the default, which is automatically selected.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Select file system type and formatting options:
•
Quick format – This option formats the volume or partition without scanning for
bad sectors in the volume or partition. Check this box to use this format method.
•
Enable file and folder compression – This option can be used only if you selected
NTFS format. Check this box to use this format method.
Click OK to begin formatting.
A progress bar displays in the list view.
Delete a Partition or Volume
NOTICE: You must delete all shares and persistent images from your volume before deleting it.
If a volume is removed before all shares of that volume have been removed, the NAS Manager
might not display shares correctly.
1
2
Right-click the designated volume and click Delete Volume.
Click Yes to delete or No to cancel.
The volume is removed immediately if you click Yes.
Working With Dynamic Volumes
Dynamic volumes are volumes created on dynamic disks with Array Manager. This section
discusses how to create and extend dynamic volumes.
Creating a Dynamic Volume
NOTE: To take advantage of all the system features such as defrag and encryption, it is
recommended that you use the default value of 64 KB for the allocation unit size when creating
a virtual disk.
NOTE: The maximum supported volume size is 2 TB.
1
2
From the toolbar, click the Create Volume icon.
The Create Volume Wizard appears.
Click Next.
You are asked to select whether to create a partition or a volume. Make sure that the
Dynamic volume button is highlighted.
The dynamic group to which the volume will belong is automatically created and
appears selected.
3-18
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Click Next.
You are prompted for the volume layout and size of the volume to create.
Select the concatenated dynamic volume types.
NOTE: Software mirroring, striping, and software RAID are not recommended because of
performance degradation.
5
6
Provide a size in MB or GB.
Click Next.
When you create the volume, you will see a Query Max Size button. Query Max Size
works differently depending on whether you have one disk or multiple disks selected.
•
•
If you have no disks selected and you click Query Max Size, the size shown in the
Total volume size entry field will be the maximum for all available disks.
If a disk or disks are selected and you click Query Max Size, the size indicated will
be the maximum size for the selected disk(s). However, if you click Query Max
Size a second time, the size will be the maximum for all available disks.
7
After all selections are made, verify your settings and click Next.
You can choose a different disk for the volume you are creating.
8
9
Click Modify to display the Modify Disks dialog box.
Click the disk you want to change, and then click the arrow to select a disk from the
drop-down menu.
10 Choose a drive letter.
11 Click Next.
12 Format the volume using NTFS as the volume type.
13 Select an allocation unit size, if you chose to use a size other than the default.
14 Choose the file system type and, if desired, a formatting option.
NOTE: Quick format formats the disk without checking for bad sectors.
15 Click Next and then click Finish.
Adva nced Disk a nd Volume Ma nagement Using Ar ra y Ma na ger
3-19
Download from Www.Somanuals.com. All Manuals Search And Download.
Extending a Dynamic Simple or Spanned Volume
You can extend a volume only if the following are true:
•
•
•
The volume is formatted as NTFS.
The volume was originally created on a dynamic disk.
There is unallocated space on a dynamic disk onto which volume can be extended.
You cannot extend a volume if any of the following are true:
•
•
•
The volume is formatted as FAT or FAT32.
The volume is using software RAID (striped, mirrored, or RAID 5 volume).
There is no unallocated space available on a dynamic disk.
You can extend simple and spanned volumes on dynamic disks onto a maximum of 32
dynamic disks. After a volume is extended, it cannot be mirrored or striped using software
RAID. No portion of a spanned volume can be deleted without deleting the entire spanned
volume.
1
2
3
Right-click the simple or spanned volume you want to extend and then click Extend
Volume.
The selected volume appears in the dialog box along with its current size.
Enter the amount to extend the volume and click OK.
Ignore any system messages that you might see while the volume extends. You do not
have to run any special utilities.
Click OK.
The volume now shows the size of the extended volume.
3-20
Adva nced Disk a nd Volume Ma na gement Using Ar r a y Ma na ger
Download from Www.Somanuals.com. All Manuals Search And Download.
This chapter provides information about system management for your PowerVault™ 750N
or 755N NAS appliance. The following topics are discussed:
•
•
•
•
Dell OpenManage™ Remote Assistant Card (DRAC)
Alert log messages from Dell OpenManage Server Agent
Configuring Simple Network Management Protocol (SNMP) community properties
Configuring SNMP agent properties
Dell OpenManage Remote Assistant Card
The DRAC is an optional server management card designed to provide remote manage
capabilities. With the addition of the DRAC, system administrators can manage and
monitor a system through a modem or network connection, even when the system itself is
down.
If you purchased a DRAC with your PowerVault 750N or 755N system, you will need to
install the DRAC software as outlined in this chapter.
After the server software has been installed, you will need to install the DRAC Web Client
software on the system that you plan to use as the DRAC client. This software is included
on the Resource CD. See the DRAC documentation on the Resource CD for more
information on how to install the DRAC Web Client software.
The DRAC must already be installed in your system. See the Dell OpenManage Remote
Assistant Card User's Guide on the Resource CD for instructions on installing this card in
your system.
To install and configure the DRAC software on your PowerVault 750N or 755N system using
the Terminal Services Advanced Administration Menu, perform the following steps:
1
Connect to the system through NAS Manager.
NOTE: To use the NAS Manager you must be logged in as Administrator. The NAS Manager
default administrator user name is administrator and the default password is
powervault.
2
3
Click Maintenance and then click Terminal Services.
If required in the Terminal Services Client window, log in to the Terminal Services
Client by entering your user name and password.
4
Click the Advanced Administration Tool icon to access the Advanced Administration
Menu.
4-2
S yst em Ma na gement
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
At the System Management menu, click Dell Remote Assistant Setup.
The Dell Remote Assistant Card Setup and Configuration window displays.
Click Install DRAC Software.
The Setup/Install Wizard starts. You can install the management software. Ensure
that you use the default install directory (C:\Program Files\DRAC\Host).
7
Reboot your system.
NOTE: Rebooting disconnects the NAS Manager.
Repeat steps 1 through 4 after the system has rebooted.
Click Configure DRAC Card.
8
9
The Advanced Administration Window displays. You can edit the configuration file,
apply the configuration, and reset the DRAC. DRAC uses the RacConf utility as
described in the Dell OpenManage Remote Assistant Card User's Guide.
10 Click Edit Config File.
Edit the configuration file and customize the DRAC.
The following is an example of setting information for both user and Internet protocol
(IP) address:
[AdminEntry0]
Administrator Alias = drac
Password = password
[NetConfig]
IpAddr = 10.4.1.200
SubnetMask = 255.255.0.0
GatewayAddr = 0.0.0.0
NOTE: When you create the username and password, ensure there are no spaces before or
after the username or password.
11 Click Configure.
You can load the configuration file information into the DRAC after the file has been
edited and saved.
After the configuration file has loaded, the user name and password will be
automatically removed from the configuration file as a security precaution.
12 Click Soft Reset.
S yst em Ma na gement
4-3
Download from Www.Somanuals.com. All Manuals Search And Download.
For more information about your DRAC, see the Dell OpenManage Remote Assistant Card
User's Guide on the Resource CD.
Alert Log Messages From Dell OpenManage
Server Agent
Server Agent server management software generates alert messages that appear in the
SNMP event log file. Alert log messages consist of information, status, warning, and failure
messages for drive, temperature, fan, and power conditions. To see the trap logs, from the
NAS Manager Maintenance page, go to the Logs page or go to Terminal Services to log
onto your server and click the Event Viewer link under Administrative Tools in the
Advanced Administration Menu to view logged events.
Configuring SNMP Community Properties
1
2
3
4
Click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session.
Click the Advanced Administration Tool icon to access the PowerVault Advanced
Administration Menu.
5
From the PowerVault Advanced Administration Menu, select System Management,
and click Computer Management.
6
7
8
9
From the Computer Management console tree, click Services and Applications.
Click Services.
In the details pane, right-click SNMP Service.
From the Action menu, click Properties.
10 From the Security tab, click Send authentication trap.
Select this option if you want a trap message sent when authentication fails.
11 Select Accepted community names, and click Add.
12 Select Community Rights, and select a permission level for this host to process SNMP
requests from the selected community.
13 To view a description of a dialog box item, right-click the item, and then click What's
This?
4-4
S yst em Ma na gement
Download from Www.Somanuals.com. All Manuals Search And Download.
14 In Community Name, type a case-sensitive community name, and then click Add.
15 In SNMP Service Properties, specify whether or not to accept SNMP packets from a
host:
•
To accept SNMP requests from any host on the network, regardless of identity,
click Accept SNMP packets from any host.
•
To limit acceptance of SNMP packets, click Accept SNMP packets from these
hosts, click Add, type the appropriate host name, Internet protocol (IP) or
Internetwork Packet eXchange (IPX) address, and then click Add again.
NOTE: You can make changes to an entry by clicking the entry, and then clicking Edit. You can
delete a selected entry by clicking Remove.
NOTE: If you remove all the community names, including the default name Public, SNMP
does not respond to any community names presented. You can add additional community and
host names as necessary.
NOTE: If you change existing SNMP settings, your changes take effect immediately. You do not
need to restart the SNMP service for your settings to take effect. If you are configuring SNMP
for the first time, you must restart SNMP before these settings take effect.
Configuring SNMP Agent Properties
1
2
3
4
5
Click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session.
Click Advanced Administration Menu.
At the Advanced Administration Menu, select System Management, and click
Computer Management.
6
7
8
9
Click Services and Applications.
Click Services.
In the details pane, right-click SNMP Service.
From the Action menu, click Properties.
10 Select the Agent tab, then select Contact, and type the name of the user or system
administrator.
11 Select Location, and then type the physical location of the system or the contact.
12 In the Service panel, select the appropriate check boxes for this system, and then click
OK.
S yst em Ma na gement
4-5
Download from Www.Somanuals.com. All Manuals Search And Download.
13 To view a description of a dialog box item, right-click the item, and then click What's
This?
NOTE: If you change existing SNMP settings, your changes take effect immediately. You do not
need to restart the SNMP service for your settings to take effect. If you are configuring SNMP
for the first time, you must restart SNMP before these settings take effect.
4-6
S yst em Ma na gement
Download from Www.Somanuals.com. All Manuals Search And Download.
This section provides instructions on how to recover from a system failure, and how to back
up and restore the system state. The following topics are discussed:
•
•
•
•
•
Recovery from system failure
System state backup and restore
Microsoft® Windows® 2000 backup and recovery tools
Third-party backup software for network backups
Installing device drivers for Windows 2000
Recovery From System Failure
If the Windows Powered operating system becomes inoperable, you can use the
Reinstallation CD for your system to reinstall the operating system. After the operating
system is reinstalled, the system state backup can be restored to recover system
configuration information.
Operating system reinstallation includes the following procedures:
•
•
•
Reinstalling the operating system using the Reinstallation CD.
Performing system setup
Restoring the system state backup (see “Restoring System State Data” for more
information)
Reinstalling the Operating System
NOTICE: When using the Reinstallation CD, you will lose all data on the operating system
drive.
1
2
3
Insert the Reinstallation CD into the CD drive.
Shutdown the system.
If one or both existing operating system disks are operational, proceed to step 4.
If both operating system mirrored drives (small computer system interface [SCSI]
drives 0 and 1) have been replaced with new, initialized drives, you must remove all of
the internal data drives. You do not need to completely remove the internal data drives
from the enclosure. You only need to pull the internal data drives out far enough to
ensure that they are disconnected from the backplane. Ensure that you leave only the
two new operating system drives installed in the internal drive bays.
5-2
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Turn on the system.
The Reinstallation CD automatically starts the installation process if the system is a
PowerVault 750N or 755N NAS appliance and if the first logical volume configured on
the RAID controller is a drive in a two drive RAID 1 group.
It takes up to 30 minutes for the system to reinstall.
NOTE: The CD ejects approximately 7 minutes into the installation time. The ejection of
the CD does not indicate an error or that the process is finished.
5
Otherwise, proceed to step 6.
6
7
Use a Web browser to connect to the system.
Use the Dell OpenManage™ Array Manager to merge into the system any data
containers that were previously defined. (See the “Merging Foreign Disks” section in
“System Recovery, Backup, and Restore” for more information about merging disks.)
Initial System Setup
After the operating system is reinstalled on the system, you should configure the system
again to establish network communication. If Kick-Start is used for configuration, insert
your Kick-Start diskette after the CD drive tray ejects the Reinstallation CD. See
“Introduction” for information on initial system configuration.
System State Backup and Restore
Integrated Windows 2000 backup and recovery tools allows administrators to back up and
restore the system state data.
System state data includes the following:
•
•
•
•
•
Registry
COM+ class registration database
System boot files
Users and groups information
CIFS/NFS/Novell® NetWare®/Macintosh share data
S ystem Recover y, Ba ckup, a nd Restor e
5-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Backing up the system state allows you to recover the system if an operating system
reinstallation is required. Restoring your system state restores customized settings such as
user information and share information.
NOTE: You must back up your system state to a hard-disk drive other than your operating
system hard-disk drive to restore your system state after using the Reinstallation CD.
Backing Up System State Data
NOTE: To use the NAS Manager you must be logged in as Administrator. The NAS Manager
default administrator user name is administrator and the default password is
powervault.
1
2
3
4
5
Click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session.
Go to the Advanced Administration Menu.
Select Administrative Tools and click Perform System State Backup.
The Performing System State Backup window displays.
6
7
Click OK to continue.
Select the location to store your system state backup and click OK.
NOTE: System State Backup takes approximately five minutes to complete and requires
approximately 250 megabytes (MB) of disk space.
You are recommended to regularly back up your system state to your RAID 5 protected data
drives. This action enables you to go back to the most recent state if an operating system
reinstallation is required.
Restoring System State Data
NOTE: To restore your system state, you must have previously backed up your system using the
System State Backup Tool on the Advanced Administration Menu or from Windows 2000
Backup and Recovery Tools.
1
2
3
Click Maintenance.
Click Backup.
Log in to the system as administrator.
5-4
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Click Restore Wizard.
The Restore Wizard window displays.
5
6
Click Next.
Click Import File.
The Backup File Name window displays.
You must import the file because your system will not be aware of previous
backups after you complete a reinstallation from the Reinstallation CD.
7
Click Browse.
The Select file to catalog window displays.
8
9
Browse for your file.
After locating your file, click OK.
The What to Restore window displays.
10 Click + symbol next to File.
11 Click + symbol next to Media Created on.
You are prompted for your backup file location.
12 If the location is correct, click OK; otherwise, browse to the correct backup file
location.
An icon labeled System State appears in the What to Restore window.
13 Click + (symbol) next to System State.
You are asked to confirm your backup file location again.
14 If the location is correct, click OK; otherwise, browse to the correct backup file
location.
15 Click the checkbox next to System State.
16 Click Next.
17 Click Advanced.
The Where to Restore window displays.
18 Click the original location as new the location to restore the files.
S ystem Recover y, Ba ckup, a nd Restor e
5-5
Download from Www.Somanuals.com. All Manuals Search And Download.
19 Click Next.
The How to Restore window displays.
20 Click Always replace the files on disk.
21 Click Next.
The Advanced Restore Options window displays.
22 Leave all checkboxes unchecked.
23 Click Next.
24 Click Finish to initiate the restore process
25 Restart your system after the restore process completes.
NOTE: Windows must replace all locked files on the system; therefore, the restart system
process might take approximately 15 minutes to complete.
Windows 2000 Backup and Recovery Tools
Windows 2000 Backup and Recovery Tools allow you to back up your data volumes to a
locally attached tape drive or to a file.
NOTE: You must have a supported SCSI card installed and have a tape drive to back up your
data volumes to tape.
You can get to the Windows 2000 Backup and Recovery Tools by clicking the Maintenance
tab on the NAS Manager primary menu and clicking Backup or by clicking Windows 2000
Backup/Recovery Tools on the Advanced Administration Menu under Administrative
Tools.
For more information on the Windows 2000 Backup and Recovery Tools, see the Windows
Powered Help. You can access Windows Powered Help by clicking Windows Powered Help
in the Advanced Administration Menu under Administrative Tools or by clicking Help in
the Start Menu when using the Terminal Services Client.
Supported Third-Party Backup Software
•
VERITAS® Backup Exec®
–
Backup Exec 8.0, 8.5, and 8.6 for Windows NT® and Windows 2000
5-6
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Computer Associates® ARCserveIT™
–
–
ARCserveIT 2000 for Windows NT and Windows 2000
ARCserveIT 6.61 for Red Hat Linux
Third-Party Backup Software for Network
Backups
You may back up your data volumes over the network to local area network (LAN)-attached
backup servers. This backup requires that you already have a backup server on your network.
You are recommended to use backup software network accelerator agents to greatly improve
network backup performance.
Installing Network Accelerator Agents
VERITAS Backup Exec and Computer Associates ARCserve network accelerator agents can
both be installed remotely by installing the agent to the system from a remote system on
the network.
See the documentation for your backup software for more information on how to install the
network accelerator agents.
Third-Party Backup Software for Local
Backups
The following information explains how to install and use the VERITAS Backup Exec and
ARCserve 2000 software for local backups.
Installing VERITAS Backup Exec
You must first install VERITAS Backup Exec on the Dell™ PowerVault™ NAS appliance,
and then install VERITAS Remote Administrator on a remote system.
NOTE: Before installing the backup software, check http://support.dell.com for the latest driver
and software updates. You might need to install these updates after completing the procedures
below.
S ystem Recover y, Ba ckup, a nd Restor e
5-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing VERITAS Backup Exec on the NAS Appliance
NOTE: You do not need to attach a keyboard, mouse, or monitor to the NAS appliance before
you install VERITAS Backup Exec. VERITAS Backup Exec supports installation using
Terminal Services, and management using VERITAS Remote Administrator.
1
2
Insert the VERITAS Backup Exec CD in the CD drive of the NAS appliance.
From the NAS appliance web interface, click Maintenance, and then click Terminal
Services.
3
4
Log into the NAS appliance.
Follow the instructions in the documentation that came with your backup software.
Installing VERITAS Backup Exec Remote Administrator on the Remote System
1
Insert the VERITAS Backup Exec CD in the CD drive of the remote system.
The CD should autoplay.
2
If the CD does not autoplay, open Microsoft® Windows® Explorer and right-click the
CD drive that contains the VERITAS software.
3
4
Select Autoplay from the menu.
Follow the instructions in the documentation that came with your backup software.
Using VERITAS Backup Exec Remote Administrator
1
On the remote system, click the Start button and point to Programs—> VERITAS
Backup Exec—> VERITAS Backup Exec.
The Connect to Server window displays.
2
3
Enter the name of the NAS appliance in the Server field.
Enter login information in the Login Information field and then click OK.
The Backup Exec Assistant window, which displays in front of the Backup Exec
window, provides wizards for many common backup tasks. You can also use the Tools
menu on the Backup Exec window to display the Backup Exec Assistant.
Use Remote Administrator to manage all your backup operations just as you would
from the local application. See the VERITAS Backup Exec documentation for more
information on how to use the software.
5-8
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing ARCserve 2000
To use ARCserve 2000 to back up your system, you must first install ARCserve 2000 on the
NAS appliance, and then install ARCserve Manager on a remote system.
Installing ARCserve 2000 on the NAS Appliance
NOTE: You must first attach a keyboard, mouse, and monitor to the system before you install
ARCserve 2000. ARCserve 2000 cannot be installed or managed using Terminal Services.
1
Insert the ARCserve 2000 CD in the CD drive of the NAS appliance.
The CD should autoplay.
2
3
If the CD does not autoplay, open Windows Explorer and right-click the CD drive that
contains the ARCserve 2000 software.
Select Autoplay from the menu.
The ARCserve 2000 Product Explorer window displays.
4
Follow the instructions in the documentation that came with your backup software.
Installing ARCserve Manager on the Remote System
1
Insert the ARCserve 2000 CD in the CD-ROM drive of the remote system.
The CD should autoplay.
2
3
If the CD does not autoplay, open Windows Explorer and right-click the CD-ROM
drive that contains the ARCserve 2000 software.
Select Autoplay from the menu.
The ARCserve 2000 Product Explorer window displays.
4
Follow the instructions in the documentation that came with your backup software.
Using ARCserve 2000 Remote Manager
1
On the remote system, click the Start button, point to Programs—> ARCserve—>
ARCserve Manager.
The ARCserve Quick Access window displays.
The ARCserve Quick Access window provides wizards for many common backup
tasks. You can use these wizards or go through the standard menus to perform your
backup tasks.
S ystem Recover y, Ba ckup, a nd Restor e
5-9
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Enter the name of the NAS appliance in the Server field at the top of the screen to
manage the backup software on the NAS appliance.
You can manage all your backup operations from this application, just as you would
manage them from the local application. See the ARCserve 2000 documentation for
more information on how to use the software.
Backing Up Persistent Images
Backing up persistent images eliminates the possibility of files changing during the backup
job. Persistent images always contain the data that existed when the persistent image was
taken. However, backing up persistent images requires that you perform several steps and
should only be performed by advanced backup administrators. It is recommended that you
use the available open file agents in VERITAS Backup Exec and Computer Associates
ARCserve to backup your open files rather than backing up persistent images.
NOTE: Do not use Computer Associates ARCserve to backup or restore persistent images.
To back up a persistent image correctly to ensure that you can restore it properly, perform
the following steps:
1
Use the NAS Manager to create a persistent image.
NOTE: For increased performance, only backup read-only persistent images.
2
On the NAS Manager primary menu, click Maintenance and then click Terminal
Services.
3
4
Log on to the system.
Using the Windows Explorer, browse to the persistent image you created in step 1.
Persistent images are located in the ActiveArchive™ directory of the volume on which
you created the persistent image in step 1.
5
6
7
8
9
Right-click on the persistent image and click Sharing... .
Click the radio button adjacent to Share this folder.
Enter a name for the share in the Share name text box.
Click Permissions.
Set the desired permissions in the Permissions window and click OK.
10 Click OK in the Properties window to finish the share creation process.
5-10
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
11 On the system that is running VERITAS Backup Exec, set up VERITAS Backup Exec
so that it is able to backup user shares.
You can find this option in Tools—> Options menu on the Network tab.
12 In the Veritas Backup Exec Backup Selections window, browse to your NAS appliance
under Entire Network.
13 Select the share name that you created for your persistent image.
14 Deselect the Persistent Storage Manager State directory when performing persistent
image backups. This directory contains files needed for persistent images. However, to
save space on your backup media, backing up these files is not recommended.
15 Click Backup.
16 Select Run Now to run the backup now or Schedule to schedule your backup job to
run at a later time.
NOTE: Although you are backing up your persistent image from a Network Share, it will not
create network traffic if you are backing up to a local backup device.
Limitations on Backing Up Persistent Images
•
•
•
You cannot do incremental or differential backups of persistent images.
You cannot use GFS rotation schemes when backing up persistent images.
You cannot schedule a backup of a persistent image.
You must do a manual backup of persistent image files because each persistent image
file name is unique in that it includes the date and time (hour-minute-second) that
the persistent image was taken.
•
When you restore a persistent image, you must redirect the restore to a location other
than the original persistent image location. A restore to the original location will not
be successful.
Restoring Persistent Images From Tape Backup
NOTE: Do not use Computer Associates ARCserve to restore persistent images.
To restore your persistent images from tape backup, perform the following steps:
1
On the system on your network that is running Veritas Backup Exec, click the Restore
Selections tab to bring up the window that lists your previous backups.
2
Browse to your backup of the persistent image that you want to restore and select it by
clicking the check box next to it.
S ystem Recover y, Ba ckup, a nd Restor e
5-11
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
6
Click Restore.
Click the Redirection tab.
Click the check box next to Redirect Files.
Enter the drive letter and path where you want the files to be restored in the text boxes
next to Restore to drive and Restore to path.
7
Click Run Now to run the restore immediately or click Schedule to schedule your
restore job to run at a later time.
Installing Tape Device Drivers for Windows
2000 Backup and Recovery Tools
If you are using Windows 2000 backup and recovery tools, you might need to install drivers
for both tape drives and tape media changers.
NOTE: Most of the tape device drivers are located in the c:\dell\drivers directory. However, you
should always check the http://support.dell.com website for updated drivers and patches.
Installing Drivers for PowerVault Tape Drives
To install drivers for the PowerVault tape drives, perform the following steps.
1
2
3
4
5
Connect the Dell PowerVault tape device and restart the system.
Connect to the PowerVault NAS Manager.
Click Maintenance and then click Terminal Services.
Log in to a Terminal Services Client session.
On the Advanced Administration Menu under System Management, click Computer
Management.
6
7
8
9
Click Computer Management in the left pane.
Click System Tools in the left pane.
Click Device Manager in the left pane.
Click Unknown Devices in the right pane.
10 Double-click Unknown Tape Device.
11 Click Driver in the pop-up window.
5-12
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Click Update Driver.
The Upgrade Device Driver Wizard displays.
13 Click Next.
14 Click the radio button next to Search for a suitable driver for my device
(recommended) and then click Next.
15 In Optional search locations, click the checkbox for Specify a location.
Deselect the other checkboxes.
16 Click Next.
The Properties dialog box displays.
17 Specify the folder name that contains the device drivers in the path for Copy
manufacturer's files from.
18 Click OK and then click Next.
The Upgrade Device Driver Wizard searches the specified folder for the driver files.
19 Make sure the wizard has selected the appropriate PowerVault tape device and click
Next.
20 Click Finish.
21 Click Close to exit the driver properties dialog box.
Installing Drivers for PowerVault Tape Drive Media Changers
To install drivers for tape media changers when using Windows 2000 backup and recovery
tools, perform the following steps.
1
2
3
4
5
Connect the PowerVault tape device and restart the machine.
Connect to the PowerVault NAS Manager.
Click Maintenance and then click Terminal Services.
Log in to a Terminal Services Client session.
In the Advanced Administration Menu, click Computer Management under System
Management.
6
7
8
Click Computer Management in the left pane, and then click System Tools.
Click Device Manager in the left pane.
Click Medium Changers in the right pane.
S ystem Recover y, Ba ckup, a nd Restor e
5-13
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Double-click Unknown Medium Changer.
10 Click Driver in the Properties window.
11 Click Update Driver.
The Upgrade Device Driver Wizard displays.
12 Click Next.
13 Click the radio button next to Search for a suitable driver for my device
(recommended) and then click Next.
14 In Optional search locations, click the checkbox for Specify a location.
Deselect the other checkbox.
15 Click Next.
A dialog box displays with a field for you to enter the location of the device driver.
16 In the path for Copy manufacturer's files from, specify the folder name that contains
the device drivers, and click OK.
17 Click Next.
The Upgrade Device Driver Wizard searches the specified folder for the driver files.
18 Make sure the Upgrade Device Driver Wizard has selected the appropriate PowerVault
tape device and click Next.
19 Click Finish.
20 Click Close.
5-14
S yst em Recover y, Ba ckup, a nd Restor e
Download from Www.Somanuals.com. All Manuals Search And Download.
Dell ActiveArchive allows the creation and preservation of persistent images of Dell
PowerVault™ 750N and 755N system data volumes. The Dell ActiveArchive software is
installed on all PowerVault 75xN systems. It can be configured by using the NAS Manager.
This chapter provides information on the following topics:
•
•
•
•
•
•
•
•
•
•
•
Introduction to persistent images
Scheduling persistent images
Adding persistent images to the schedule
Deleting a persistent image schedule
Editing the properties of a persistent image’s schedule
Taking a new persistent image
Deleting a persistent image
Configuring the persistent image environment
Setting persistent image retention weights
Accessing persistent images
Restoring a volume
Introduction to Persistent Images
A persistent image is a point-in-time copy of a disk volume. Unlike conventional volumes,
the information in the persistent image is static. A persistent image contains an exact copy
of the file system at the time the persistent image was created. If you change a file on the
active file system after taking a persistent image, the persistent image contains the old
version of the file. If an active file gets corrupted or deleted, you can restore the old version
by copying the file from the latest persistent image. Also, because the persistent image
contains the contents of the file system when the persistent image was taken, you can
perform a backup from the persistent image without stopping all I/O to the file servers, thus
eliminating the backup window required by other types of backup.
NOTE: Persistent images are temporary backups of your data that reside on the same volume as
your data. If the volume becomes damaged, you lose your data including the persistent image.
Therefore, persistent images do not replace regular backups of your volume.
6-2
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
Cache File
The Dell ActiveArchive software stores changed data in a cache file. A cache file resides on
each volume of your system. By default, the persistent image cache file is 20 percent of each
volume. You can use the NAS Manager to change the percentage of the volume that is
dedicated for the cache file.
NOTE: You cannot take a persistent image of the operating system drive (C:).
Cache Thresholds
The Dell ActiveArchive software has two thresholds that provide warnings when the cache
file is approaching maximum capacity. The Cache Full Warning Threshold logs an event in
the event log and displays an error in the NAS Manager status indicator when the cache file
reaches the threshold (default is 80% full). The Cache Full Threshold, which is labeled
Begin deleting images in the NAS Manager, specifies the threshold where the PowerVault
NAS Manager deletes the oldest persistent images with the lowest retention weights until
the cache file is below the Cache Full Threshold (default is 90% full).
Persistent Image Retention Weights
When the system reaches the cache full threshold, the system starts deleting files
depending on the retention weight and age of the persistent image. The system first looks
for the persistent image with the with the lowest retention weight in the cache file and
deletes the oldest persistent image with that retention weight. After all persistent images
with that lowest retention weight have been deleted, Dell ActiveArchive looks for and
deletes the oldest files with the next higher retention weight.
Persistent Image Considerations
When using persistent images, system performance may be degraded, depending on the
rate your data is changing and the number of persistent images kept for each virtual disk.
Read performance of the virtual disk remains constant, regardless of the presence of
persistent images. Read performance of the persistent image is identical to that of the
virtual disk. Write performance, however, may vary. Each initial write to a virtual disk area
causes the Dell ActiveArchive software to rewrite the data to the persistent image cache file,
and the initial write is slower if the data is being protected by a persistent image. Changes
to data that is not protected by a persistent image will not cause a performance degradation.
NOTICE: If you use the Reinstallation CD to reinstall your operating system, your persistent
images will be deleted.
Dell ActiveAr chive™
6-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing Persistent Images
You can store up to 250 persistent images per volume; however, if you exceed 250 persistent
images, the oldest persistent image with the lowest retention weight is overwritten. This
number of persistent images allows you to schedule multiple persistent images. For
example, you could implement a typical schedule similar to the following schedule. (You
should tailor your schedule depending on how the data is changing.)
•
•
•
Seven daily persistent images
Two weekly persistent images
Two monthly persistent images
Accessing Directories, Folders, and Files
By default, administrators can access the ActiveArchive directory in the root of each
volume. Each persistent image is displayed separately with a date and time stamp showing
when the persistent image occurred. The administrator can browse the persistent image as
if it were a standard volume. To access the ActiveArchive directory from the NAS Manager
home page, click Disks and then click ActiveArchive. Each persistent image is mounted as a
volume on the file system to allow access by clients. Persistent images are created as
read-only.
Persistent image directories are used in the same way that conventional directories are used.
The files and folders in the persistent image directories have the same permissions as the
files and folders on the original volume. All persistent images are persistent and will survive
system power losses or reboots.
NOTE: The ActiveArchive directory is a hidden folder. You must configure your system to view
hidden files and folders to view your ActiveArchive directory.
Allowing User’s Access to Persistent Images
To allow user’s to access the persistent images, the system administrator must modify the
permissions for the ActiveArchive directory. The files and folders within a persistent image
are identical to the permissions on the original files and folders. Use the PowerVault NAS
Manager to change the ActiveArchive directory permissions by performing the following
steps.
6-4
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: To use the PowerVault NAS Manager you must be logged in as Administrator. The
PowerVault NAS Manager default administrator user name is administrator and the
default password is powervault.
1
2
3
4
5
6
7
8
9
On the NAS Manager primary menu, click the Maintenance tab.
Click Terminal Services.
Log on to a Terminal Services Advanced Client session.
Open the Explorer.
Select the drive on the left side.
Right-click the ActiveArchive directory and click Properties.
Click the Security tab and click Add....
Add individual users or groups.
Give the selected members Read and List Folder Contents permissions.
Repeat these steps for the ActiveArchive directory on each volume the users will access. You
do not need to change the permissions of the persistent images and their subdirectories.
These files and folders will retain the original files’ and folders’ permissions.
Preparing Your Volumes for Persistent Images
Before you take or schedule persistent images, you must prepare each of your volumes for
persistent images. This process creates the cache file and other files needed for taking
persistent images.
NOTE: This process might take several hours.
To prepare your volume for persistent images, perform the following steps:
1
2
3
4
5
On the NAS Manager primary menu, click Disks and then click ActiveArchive.
Click Volume Settings.
Click the radio button adjacent to the volume you want to prepare.
Click Configure... .
Use the drop-down menus to configure the required options. For information about
the options, see Configuring Persistent Image Volume Settings.
6
Click OK to start the prepare process.
Dell ActiveAr chive™
6-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Scheduling Persistent Images
NOTE: Before scheduling persistent images, prepare each of your volumes for persistent
images. (See the Preparing Your Volumes for Persistent Images.)
When you click Disks and then ActiveArchive, the Scheduled Persistent Image page
displays a list of all scheduled persistent images and associated tasks. Each scheduled
persistent image is identified by the scheduled time, day, frequency, starting date, and
target volume ID. Persistent images are identified by time and date, and are located in the
ActiveArchive directory. The ActiveArchive directory is located in the root of each
ActiveArchive volume. Only the Administrator can access the ActiveArchive directory. The
files and folders in the persistent image directories have the same permissions as the files
and folders on the original volume. Persistent image directories are used exactly the same as
conventional system volumes. Unlike conventional volumes, read-only persistent image
images are static, recording the precise content of the originating volume at the time you
created the persistent image.
Displaying the List of Persistent Images
The Persistent Images page displays all current active persistent images. Each entry
identifies the date and time the persistent image was created and the volume it preserves.
Select an individual persistent image by clicking the radio button to the left of the
description.
1
2
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Persistent Images.
Adding Persistent Images to the Schedule
To add a persistent image to the schedule, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Schedules.
In the Tasks list on the Schedules page, click New...
Use the dropdown menus to select the Starting time, the frequency at which to repeat
the persistent image (Repeat every frequency), the Beginning day, the Volume(s), the
Retention Weight, number of images (how long) to Save count, and the persistent
image Name.
NOTE: To select multiple volumes, press and hold the < Ctrl> key and select all volumes
that are to be included in the persistent image.
6-6
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
You can use patterns in the persistent image name to differentiate your persistent
images. For example if you use a pattern of Snapshot.%i and you take two
persistent images, you would have Snapshot.1 and Snapshot.2. The default
persistent image name pattern is Snapshot %M-%D-%Y %H.%m.%s. Valid pattern
macros are as follows:
•
•
•
•
•
•
•
•
•
•
•
%M = Month
%D = Day
%Y= Year
%h = Hours in 12-hour format
%H = Hours in 24-hour format
%s = Second
%i = Instance, which increments once per instance.
%a = AM/PM
%W = Day of the week
%w = Three letter day of the week
%% = Percent sign
5
Click OK to save the new scheduled persistent image.
Deleting a Persistent Image Schedule
1
2
3
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Schedules.
On the Schedules page, click the check box next to the scheduled persistent image to
be deleted.
4
5
In the Tasks list on the Schedule page, click Delete.
Click OK to delete the item or Cancel to leave the item intact.
Editing the Properties of a Persistent Image’s Schedule
1
2
3
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Schedules.
In the Tasks list on the Schedules page, click Properties...
Dell ActiveAr chive™
6-7
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Use the drop-down menus to select the Starting time, the frequency at which to
repeat the persistent image (Repeat every frequency), the Beginning day, the
Volume(s), and the number of images to Save.
NOTE: To select multiple volumes, press and hold the < Ctrl> key and select all volumes
that are to be included in the persistent image.
Using Persistent Images
NOTE: Before taking a persistent image, prepare each of your volumes for persistent images.
(See "Preparing Your Volumes for Persistent Images".)
In addition to scheduling persistent images, you can take new persistent images on demand,
delete existing persistent images, configure the persistent image environment, and set
persistent image retention weights.
Taking a New Persistent Image on Demand
1
2
3
4
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Persistent Images.
In the Tasks list on the Persistent Images page, click New...
Use the drop-down menu to select the Volume(s) to preserve.
NOTE: To select multiple volumes, press and hold the < Ctrl> key and select all volumes
that are to be included in the persistent image.
5
6
Select the Retention Weight for the persistent image.
Enter the persistent image name.
You can use patterns in the persistent image name to differentiate your persistent
images. For example if you use a pattern of Snapshot.%i and you take two persistent
images, you would have Snapshot.1 and Snapshot.2. The default persistent image
name pattern is Snapshot %M-%D-%Y %H.%m.%s. Valid pattern macros are as
follows:
•
•
•
•
•
%M = Month
%D = Day
%Y= Year
%h = Hours in 12-hour format
%H = Hours in 24-hour format
6-8
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
•
•
%s = Second
%i = Instance, which increments once per instance.
%a = AM/PM
%W = Day of the week
%w = Three letter day of the week
%% = Percent sign
7
Click OK to create the persistent image.
Deleting a Persistent Image
1
2
3
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Persistent Images.
On the Persistent Images page, click the check box next to the persistent image that is
to be deleted.
4
5
In the Tasks list, click Delete.
Click OK to delete the persistent image.
Setting Persistent Image Retention Weights
To change the retention weight (deletion priority) of a persistent image, you must edit the
persistent image properties by selecting an image from the Persistent Image page and then
clicking Properties... in the task list.
1
2
3
4
5
On the NAS Manager primary menu, click Disks, and then click ActiveArchive.
Click Persistent Images.
In the Tasks list, click Properties....
Select the Retention weight.
Click OK to update the persistent image.
Dell ActiveAr chive™
6-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuring the Persistent Image Global Settings
You can use drop-down menus to modify the various aspects of the persistent image
environment.
1
2
On the NAS Manager primary menu, click Disks, and then click ActiveArchive.
Click Global Settings and configure the following options.
NOTE: Before changing the Image Directory Name, you must delete all existing persistent
images.
•
•
Maximum Persistent Images — Specifies the maximum number of active
persistent images per volume, up to a maximum of 250. When the volume has
250 persistent images stored, starting another persistent image will overwrite the
oldest persistent image with the lowest retention weight.
Inactive Period — Prior to starting a persistent image, the system waits for a
period of relative inactivity on the volume being imaged. The default value for this
period, which is five seconds, allows systems to start an image with a consistent
file set and a minimal time-out. Experienced administrators may reduce or
increase this value for system optimization. Reducing the inactive period allows
persistent images to begin on systems where disk inactivity is rare, at the possible
expense of synchronization problems within applications that are concurrently
writing to multiple files.
•
•
Inactive Time-Out — Specifies the amount of time the server should continue to
retry to create a persistent image (default 15 minutes). A persistent image will not
start until a period of relative inactivity, specified by the Inactive Period, occurs. If
an interval longer than Inactive Time-Out passes before the persistent image can
begin, the persistent image will not be taken and an error will be displayed in the
NAS Manager status indicator and an error will be logged in the event log.
Image Directory Name — Specifies the directory name which will be used for the
persistent image mount point. Each persistent image appears as a subdirectory in
the volume which is being imaged. The entire content of the volume, as it existed
when the persistent image was created, appears under this directory.
Restore Defaults reestablishes the system defaults.
Configuring Persistent Image Volume Settings
You can use drop-down menus to modify volume settings.
1
2
On the NAS Manager primary menu, click Disks and then click ActiveArchive.
Click Volume Settings.
6-10
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
5
Click the radio button adjacent to the volume setting you want to change.
Click Configure... .
Use the dropdown menus to configure the following options.
NOTE: Before changing the cache size, you must delete all persistent images on that
volume.
•
•
Cache Full Warning Threshold — Defines the percentage of cache space used
that will trigger warning messages to the system event log.
Begin Deleting Images — Defines the percentage of cache space used that will
trigger automatic deletion of the oldest persistent images with the lowest
retention weight on the system. Automatic persistent image deletions are recorded
in the system log.
•
Cache Size — Specifies the percentage of the volume that is allocated to the
cache file. Increasing this value will allow more and larger persistent images to be
maintained. Ensure that adequate space is available on the persistent image files
location drive.
6
Click OK.
Accessing Stored Persistent Images in
ActiveArchive
NOTE: Only Windows clients (CIFS) can access Dell ActiveArchive persistent images.
NOTE: The name of the utility that creates persistent images is Dell ActiveArchive. The name of
the directory where Dell ActiveArchive persistent images are stored is ActiveArchives.
NOTE: The ActiveArchive directory is a hidden folder. You must configure your system to view
hidden files and folders to view your ActiveArchive directory.
1
2
3
Right-click on My Appliance.
Click Map Network Drive from the menu.
Map to the root of the ActiveArchives volume.
Use “$” to specify the root of the volume. For example, in the Folder field, type
\\<Dellxxxxxxx>\e$, where < Dellxxxxxxx> is the name of the PowerVault 750N
or 755N system and where e is the drive letter of the volume.
4
Use Microsoft Windows Explorer to navigate to the ActiveArchive directory on the
newly mapped drive.
Dell ActiveAr chive™
6-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Restoring Volumes From an Existing Persistent
Image
To restore a volume(s) from a persistent image, you must select the persistent image to be
restored.
NOTICE: A volume is dismounted during a restore. All reads and writes to a volume that occur
during the restore process are denied. Therefore, you must stop all I/O traffic to a volume while
restoring it.
To restore volumes from a persistent image, perform the following steps:
1
2
3
On the NAS Manager primary menu, click Disks, then click ActiveArchive.
Click Restore Persistent Images.
On the Persistent Images Restore page, click the radio button next to the persistent
image that is to be restored.
4
Click OK to restore the volumes protected by the persistent image, or click Cancel to
leave the volume intact.
NOTE: Restoring persistent images that contain multiple volumes will restore all of the volumes
in the persistent image.
NOTE: If you want the ability to restore a single volume, you must take single volume persistent
images.
6-12
Dell ActiveAr chive™
Download from Www.Somanuals.com. All Manuals Search And Download.
This chapter includes descriptions of advanced features that cannot be performed from the
PowerVault™ NAS Manager menus. The following topics are discussed:
•
•
•
•
•
•
•
•
•
Installing Multilanguage User Interface (MUI) support
Installing and configuring support for other languages
Network adapter teaming
Services for UNIX®
File server for Macintosh
Services for Novell® NetWare®
Microsoft® directory synchronization services (MSDSS)
Uninterruptible power supply (UPS)
Defragmenting a volume containing persistent images
To perform the procedures in this chapter, you must use the Terminal Services Advanced
Client. To access the Terminal Services Advanced Client, perform the following steps.
NOTE: To use the NAS Manager you must be logged in as Administrator. The NAS Manager
default administrator user name is administrator and the default password is
powervault.
1
2
3
From the NAS Manager, click Maintenance.
Click Terminal Services.
Log in as administrator.
Installing Multilanguage User Interface
(MUI) Support
NOTE: Installing the MUI for your language automatically installs the appropriate language
locale.
The PowerVault 75xN NAS appliance allows you to change languages for its Microsoft
Windows® Powered operating system’s user interface. The MUI allows the PowerVault
75xN to display Windows Powered operating systems menus, dialogs and help files in
multiple languages. The supported languages are Simplified Chinese, Traditional Chinese,
Dutch, English, French, German, Italian, Japanese, Korean, Spanish, and Swedish. You
must install a language MUI from the Localization CD before it is available for use on the
system.
7-2
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Installing and configuring the operating system MUI does not affect the language used
by the NAS Manager.
1
Insert the Localization CD that came with the PowerVault 75xN into your NAS
appliance CD drive.
2
3
From a client, connect to the NAS Manager.
Click the Maintenance tab and then click Terminal Services to create a Terminal
Services Advanced Client session with the appliance.
4
5
6
7
Log in to the system as an Administrator.
Close the Advanced Administration Menu by clicking Exit.
Double-click My Appliance on the NAS desktop.
Browse to the CD drive and double-click the Dell PowerVault Localization CD to
launch the Localization CD’s web interface.
8
9
Click on the Install Multilanguage User Interface (MUI) Support link to launch the
Multilanguage File Installation installer program.
In the installer window, select the languages to be installed. Next, from the drop-down
menu, set the default MUI language.
10 Click OK to perform the installation.
11 If an Insert Disk windows appears, you must perform the following steps:
a
Click OK.
b
In the Files needed window, click Browse and browse to the i386 directory on the
Localization CD (if not already selected). Click Open.
c
In the Insert Disk window, click OK to allow the operating system to find the
required files for installation.
12 After the installation is complete, you must reboot your system.
After a MUI language has been installed, you can apply it to any user by performing the
following steps:
1
2
3
From a client, connect to the NAS Manager.
On the primary menu, click the Maintenance tab.
Click Terminal Services to create a Terminal Services Advanced Client session with
the NAS appliance.
4
Log in to the system as an Administrator.
Adva nced Fea tur es
7-3
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
7
On the Advanced Administration Menu, click System Management, and then click
Set Regional Options to launch the Regional Options control panel.
On the General tab, select the MUI language from the Your locale (location) drop
down menu, and click Apply.
Log off and log in again to the system for the new language MUI to take effect.
Installing and Configuring Support for Other
Languages
NOTE: Only install additional language locales if your desired language is not available with
MUI support or you need additional locale support.
The Windows Powered operating system that comes installed in the PowerVault 75xN can
be configured to support the ability to read and write documents in a number of languages.
To install the software required to support a specific language, perform the following steps:
1
Insert the Localization CD that came with the PowerVault 75xN into the CD drive on
your NAS appliance.
2
3
From a client, connect to the NAS Manager.
Click the Maintenance tab and then click Terminal Services to create a Terminal
Services Advanced Client session with the NAS appliance.
4
5
6
7
Login to the system as an Administrator.
Close the Advanced Administration Menu by clicking Exit.
Double-click My Appliance on the NAS desktop.
Browse to the CD drive and open the Localization CD to launch the Localization
CD’s web interface.
8
9
Click on the Install Language Locales Not Supported by MUI link to launch the
Regional Options control panel.
From the Language Settings for the System panel, select the languages to be
configured.
10 Set the default language for the system by clicking Select default..., and then selecting
the appropriate language from the drop-down menu. Click OK.
11 Click Apply to complete the operation.
7-4
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
12 If an Insert Disk windows appears, you must perform the following procedure:
a
Click OK.
b
From the Files needed window, click Browse and browse to the i386 directory on
the Localization CD (if not already selected).
c
Click Open and then click OK from the Insert Disk window to allow the
operating system to find the required files for installation.
13 After the installation is complete, you need to reboot your system.
NOTE: For more information, see the Microsoft Windows Powered operating system’s online
Help.
Network Adapter Teaming
Adapter teaming allows the system to use the combined throughput of network adapters in
parallel to increase performance or provide fault tolerance. Technologies supported by
teaming are:
•
Link aggregation supports scalable bandwidth up to 800 megabits per second (Mbps)
full duplex, or up to eight gigabits per second (Gbps) in a Gigabit Ethernet
environment. Link aggregation requires support in the network interface controller
(NIC) and the switch.
•
•
Cisco’s Fast Ether Channel (FEC) supports scalable bandwidth up to 800 Mbps at full
duplex. FEC requires support in the NIC and the switch.
Broadcom's Smart Load Balance and Fail Over, supported by Broadcom's Advanced
Server Program Driver, offers a simple method to team two Alteon or Broadcom
Gigabit Ethernet adapters together to provide load balancing and fail over. The
program also allows an onboard Intel® NIC to a member of a team to provide fail over
only capabilities.
When you install multiple Alteon or Broadcom Gigabit Ethernet adapters in the same
server, you can pair them into teams to provide redundant adapter operation in the
event of network failure. You can configure up to two teams, each with two adapters,
on each server. If traffic is not seen on the primary adapter connection in a team failure
of the adapter, cable, switch port, or switch (where the teamed adapters are attached
to separate switches), the secondary team member becomes active, taking the MAC
and IP address originally assigned to the primary adapter. Sessions should be
maintained, causing no impact to the user.
NOTE: Alteon or Broadcom Gigabit Ethernet adapters can be grouped into failover teams
with an Intel 82559 LAN on motherboard (LOM); however, assigning a LOM to be a
primary adapter is not supported.
Adva nced Fea tur es
7-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Virtual Local Area Networks (VLANs) are commonly used to split up groups of
network users into manageable broadcast domains, to create logical segmentation of
workgroups, and to enforce security policies among logical segments. Each adapter
supports up to 64 VLANs. With multiple VLANs on an adapter, a server with a single
adapter can have a logical presence on multiple IP subnets.
NOTE: Adapters that are members of a Failover Team can also be configured to support
VLANs. Since VLANs are not supported for an Intel LOM, if an LOM is a member of a
Failover Team, VLANs cannot be configured for that team.
•
Intel’s adaptive load balancing (ALB), supported by Intel's PROSet utility, offers a
simple way to increase server throughput up to 400 Mbps using Intel PRO/100 NICs.
Outgoing server traffic is balanced automatically among as many as four network
adapters. Each additional adapter adds another 100 Mbps link. Since the adapters
share the existing Internet protocol (IP) address, the network does not need to be
segmented or reconfigured. ALB can also be used over gigabit Ethernet links,
providing throughputs up to four Gbps.
Intel’s Intel's PROSet utility also provides support for Adapter Fault Tolerance (AFT),
in which a secondary Intel PRO/100 adapter backs up the link between the primary
server and the switch for continued operation if the primary link fails.
When using the Intel PROSet utility with the PowerVault 75xN system, team
members are limited to the network connectivity of the system. Valid team members
include the 10/100 megabit (Mbit) embedded NIC, optional single-port 10/100 Mbit
NIC, and the optional dual-port 10/100 Mbit NIC.
Creating Network Teams Using the Broadcom Advanced Server Control Suite
NOTE: This procedure is for Alteon and Broadcom NICs only.
To create Alteon or Broadcom network teams using the Network Teaming utility, Broadcom
Advanced Server Control Suite, perform the following steps:
1
2
3
4
Click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Broadcom
Network Teaming. The Broadcom Advanced Server Control Suite window will be
displayed on the desktop.
5
6
Click the tab on the Load Balance/Virtual LAN folder.
Click Create Team... .
7-6
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Enter the team name and select the appropriate team mode. The types of team
include Smart Load Balance and Fail Over, FEC/GEC, and Link Aggregation
(IEEE 802.3ad).
8
9
Click OK.
Select the team name in the Configuration box.
10 Select an unassigned adapter to add to the team and click > adjacent to Team
Members to add the adapter. Repeat for the second adapter.
NOTE: Alteon and Broadcom Ethernet adapters can be grouped into failover teams with an
Intel 82559 LOM; however, assigning a LOM to be a primary adapter is not supported.
11 Click OK.
Removing an Adapter From a Network Team
To remove an adapter from a network team through the Network Teaming utility, Broadcom
Advanced Server Control Suite, perform the following steps:
1
2
3
4
Click Maintenance.
Click Terminal Services.
Log into the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Broadcom
Network Teaming. The Broadcom Advanced Server Control Suite window is
displayed on the desktop.
5
6
7
Click the tab on the Load Balance/Virtual LAN folder.
Select the team name in the Configuration box.
Select an adapter in Team Members and click < adjacent to Team Members to
remove the adapter.
8
Click OK to apply the change.
Adva nced Fea tur es
7-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Network Team Mode Using the Broadcom Advanced Server
Control Suite
NOTE: This procedure is for Alteon and Broadcom network adapters only.
To change the team mode of an existing Broadcom network team through the Network
Teaming utility, Broadcom Advanced Server Program, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Broadcom
Network Teaming. The Broadcom Advanced Server Control Suite window is
displayed on the desktop.
5
6
7
Click the tab on the Load Balance/Virtual LAN folder.
Select the team name in the Configuration box.
Select the new type of team and click OK to apply the change. The types of team
include Smart Load Balance and Fail Over, FEC/GEC, and Link Aggregation
(IEEE 802.3ad).
Creating Network Teams Using the Intel PROSet Utility
NOTE: This procedure is for Intel network adapters only.
Create network teams through the Network Teaming utility, Intel PROSet II. To access the
Network Teaming utility from the NAS Manager, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Intel
Network Teaming.
The Network Teaming utility, Intel PROSet II, displays.
5
6
Click Action, click Add to Team, and click Create New Team….
The Teaming Wizard displays.
Select the type of team to create and click Next.
The types of team include AFT, ALB, FEC, and IEEE 802.3ad.
7-8
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
7
8
9
Select the adapters to include with this team and click Next.
Verify the team contains the appropriate members and click Finish.
If the team needs to be modified, click Back.
Removing Network Teams Using the Intel PROSet Utility
NOTE: This procedure is for Intel network adapters only.
Remove network teams through the Network Teaming utility, Intel PROSet II. To access
the Network Teaming utility from the NAS Manager, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Intel
Network Teaming.
The Network Teaming utility, Intel PROSet II, displays.
5
6
In the tree view, click the team to remove.
Click Action and click Remove.
Removing an Adapter From a Network Team Using the Intel PROSet Utility
NOTE: This procedure is for Intel network adapters only.
Remove an adapter from a network team through the Network Teaming utility, Intel
PROSet II. To access the Network Teaming utility from the NAS Manager, perform the
following steps:
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Intel
Network Teaming.
The Network Teaming utility, Intel PROSet II, displays.
5
6
In the tree view, click the adapter to remove.
Click Action and click Remove.
Adva nced Fea tur es
7-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Network Team Mode Using the Intel PROSet Utility
NOTE: This procedure is for Intel network adapters only.
Change the network team mode through the Network Teaming utility, Intel PROSet II. To
access the Network Teaming utility from the NAS Manager, perform the following steps:
1
2
3
4
On the NAS Manager primary menu, click Maintenance.
Click Terminal Services.
Log in to the Terminal Services session as administrator.
Under Administrative Tools on the Advanced Administration Menu, click Intel
Network Teaming.
The Network Teaming utility, Intel PROSet II, displays.
5
6
7
In the tree view, click the team to modify.
Click Action and click Change Team Mode.
In the Teaming Wizard, select the type of team to create and click Next.
The types of team include AFT, ALB, FEC, and IEEE 802.3ad.
8
Click OK to close.
Services for UNIX
Services for UNIX (SFU) provides the tools needed to integrate UNIX and Windows
networks by leveraging existing UNIX network resource and expertise. SFU includes more
than 60 of the most common UNIX command line utilities to provide a familiar
environment for UNIX users and administrators.
Server for NFS allows you to leverage your existing UNIX network resources for UNIX
clients.
SFU provides important tools to enhance and simplify the administration of your network.
These tools include:
•
•
•
Telnet Server enables character and script-based remote administration of Windows
2000 and Windows NT®-based servers from a variety of clients.
Microsoft Management Console (MMC) snap-in enables a consistent and central
management point for all SFU functionality.
ActivePerl enables existing and new scripts to use the Windows Management
Interface (WMI) to automate network administration tasks.
7-10
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
•
User Name Mapping associates Windows and UNIX user names, which allows users to
connect to NFS resources without having to log on to UNIX systems separately.
Server for Network File System (NFS)
SFU provides a robust Server for NFS that can be used to provide disk resources from your
systems running Windows NT and Windows 2000 to any system on your network that
supports NFS. To administer Server for NFS, set the following options from the SFU MMC
console:
•
•
•
•
User Mapping is the name of the mapping server to use.
Auditing is the size and location of the logging file, and the operations to audit.
Locking is the grace period for locks and a list of current locks.
Client Groups is used to group client systems for easier setting of permissions.
UNIX Utilities
UNIX utilities provided with SFU are listed in below.
Ta b l e 7 - 1 . Ca t e g o r ie s o f U NI X Ut i l i t ie s
Category
Utilit y
File and Directory Utilities
basename, cp, diff, dirname, dos2unix, find, ln, ls,
mkdir, mount, mv, paste, pwd, rm, rmdir, sdiff, split,
tee, touch, uniq, uudecode, uuencode, umount
Text Utilities
cat, cut, grep, egrep, fgrep, head, more, printf, sed, sort,
tail, tr, vi, wc
Programming Utilities
Security Utilities
perl, od, sh, strings
chmod, chown, su
Process and General Utilities
cron, crontab, date, du, kill, nice, printenv, ps, rcmd,
renice, sleep, atr, top, uname, wait, which, xargs
Adva nced Fea tur es
7-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Telnet Server
The telnet server works optimally for most installations. It will accept logins from a variety
of clients, including the telnet clients shipped with Windows 2000, Windows NT,
Windows 95, and Windows 98, as well as a variety of character mode terminal clients from
virtually any operating system. In addition, it can be configured to meet specific site
requirements such as improving security, simplifying logins, and supporting stream or
console mode.
Authentication
The SFU telnet server supports Windows NT LAN Manager (NTLM) for authentication of
client logins. NTLM allows users to be automatically authenticated to the telnet server
based on their Windows NT login. This makes using telnet completely transparent to users,
while ensuring that clear text passwords do not pass over the network. NTLM must be
supported on the client side of the login as well, however.
When using NTLM login, users are restricted to local drives on the system they are logged
in to. If they need to map network resources, they can do so by explicitly mapping with full
credentials.
Administration
The telnet server is administered using the SFU MMC snap-in, or the tnadmin program.
The options available are:
•
•
Authentication gives you the choices of NTLM and Username/Password.
Auditing enables you to set event logging to a separate log file, or the Event Log, and
set what events to log.
•
Server Settings enables you to set the following options:
–
–
–
–
–
–
Maximum number of simultaneous connections
Maximum number of failed login attempts
Map < Alt> key to < Ctrl> < A>
Telnet Port
Mode of Operation allows you to choose Console or Stream.
Default Domain Name is the domain name that is automatically added to the
login username. The default is “.”, which disables this feature.
–
Idle Session Timeout is the time until an idle session is forcibly disconnected.
7-12
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Terminate all programs when disconnecting toggles with Continue to run
programs started with the command bgjob.
•
Sessions allows you to see data about the currently active sessions (such as user,
domain, system, logon date/time) and either send a message to the session or
terminate it.
Services For UNIX MMC Console
SFU UNIX includes a single MMC for managing all of SFU. The MMC provides a cohesive
management interface that lets you administer all systems on the network from any
console. Further, since SFU supports the Windows Management Interface (WMI),
management can be scripted from the command line.
ActiveState ActivePerl 5.6
SFU includes ActiveState's ActivePerl 5.6, a full-featured port of Perl 5.6 and Perl Script to
Windows Powered operating systems. Among other improvements, ActivePerl 5.6 includes
support for fork() emulation at the interpreter level, improving the portability of scripts
and modules. ActivePerl also provides full support for the Windows Script Host, making
ActivePerl an excellent tool for system administration tasks.
User Name Mapping
User Name Mapping provides mapping of names between the UNIX and Windows
environments. You can perform User Name Mapping either from SFU or by clicking on
NFS on the Services page of the NAS Manager.
With User Name Mapping, you can create simple maps between Windows Powered user
accounts and corresponding UNIX accounts. You can also use the Advanced Map feature to
map accounts with dissimilar names. Given that UNIX user names are case-sensitive, while
Windows Powered operating system names are not, the use of User Name Mapping can
greatly simplify maintaining and managing accounts in the two environments. User Name
Mapping uses NIS to authenticate users. Also, User Name Mapping supports bidirectional
one-to-many mapping, allowing you to map a single UNIX or Windows Powered operating
system account to multiple accounts in the other environment. For example, you can map
more than one administrative account in a Windows Powered operating system to the
UNIX root account.
In SFU, the Username Mapping Service and NT Authentication Service can be installed
from the NAS appliance’s share, DomainUtils.
Adva nced Fea tur es
7-13
Download from Www.Somanuals.com. All Manuals Search And Download.
To create User and Group Name Maps, access the SFU Administration window. To access
the SFU Administration window, perform the following steps:
1
2
3
4
5
6
7
8
From the NAS Manager, click Maintenance.
Click Terminal Services.
Log in to Terminal Services as administrator.
Close the Advanced Administration Menu.
Click the Start button on the desktop task bar.
Click Programs.
Click Windows Services for UNIX.
Click Services for UNIX Administration.
The SFU Administration Console displays.
9
Click User Name Mapping.
The User Name Mapping on Local Computer window displays. You can use this
window to define your user maps.
Defining Maps
To define simple maps in SFU, select the Simple Maps check box and perform the
following steps:
1
2
3
4
Specify the Windows Domain.
Specify the NIS Domain.
Optionally, specify the NIS Server.
Click Apply to create the maps.
If you are defining advanced maps, you create user and group maps individually. In the NAS
Manager, choose Explict User Maps or Explicit Group Maps. To create advanced maps in
SFU, deselect the Simple Maps check box and perform the following steps:
1
2
3
4
5
Specify the Windows Domain.
Specify the NIS Domain.
Optionally, specify the NIS Server.
Create User Map or Group Map entries.
Click List Windows Users or List Windows Groups.
7-14
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Click List UNIX Users or List UNIX Groups.
This action refreshes your NIS and Windows maps.
Create map entries by selecting a Windows user/group from the list and a UNIX user
(UID)/group (GID) from the list and clicking Add.
Map Maintenance
You can maintain your maps from the User Name Mapping tree of the SFU window. Map
maintenance allows you to save currently defined maps and to restore saved maps.
To back up the currently defined maps, perform the following steps:
1
2
3
4
From the SFU window, click User Name Mapping.
Click Map Maintenance.
Specify a name and location of a file in which to back up the maps.
Click Backup.
To restore the a previously backed up set of maps, perform the following steps:
1
2
3
4
From the SFU window, click User Name Mapping.
Click Map Maintenance.
Specify the name and location of the file that contains the saved maps.
Click Restore.
Basic Scenarios
For UNIX and Windows NT Username Mapping, an NIS Server must already exist in the
UNIX environment. Username Mapping associates NIS users and groups to
Windows NT users and groups. There are two types of maps that can be used; simple and
advanced. Simple maps define a one-to-one relationship between same name users and
groups. Advanced maps define a relationship between dissimilar names and groups.
Workgroup
In the Workgroup scenario, you configure Username Mapping locally on the PowerVault
75xN system. All maps are contained on this system.
Adva nced Fea tur es
7-15
Download from Www.Somanuals.com. All Manuals Search And Download.
Domain
In the Domain scenario, you configure Username Mapping on the domain controller. The
Username Mapping Service and the NT Authentication Service must be installed on the
Domain Controller. If multiple Domain Controllers are present, NT Authentication must
be installed on each Domain Controller.
File Server for Macintosh
File Server for Macintosh (FSM) provides the tools needed to integrate Macintosh and
Windows networks by leveraging existing Macintosh network resource and expertise.
Microsoft UAM Volume
A user authentication map (UAM) is a software program that prompts users for an account
name and password before they log on to a server. The Macintosh Chooser has a standard
UAM built in, which uses the clear-text password or Apple’s RandNum Exchange method
of security.
Microsoft Authentication offers an additional level of security because the password is used
as a key to encrypt a random number. If the system administrator has determined that
encryption is an important security measure, you may be asked to use Microsoft
Authentication in addition to Microsoft UAM authentication.
Requirements
To use Microsoft UAM 5.0, you must have a Macintosh client running AppleShare Client
3.8 or newer or Mac OS 8.5 or newer. If you do not meet these minimum requirements, the
Microsoft UAM Installer will install the old Microsoft UAM 1.0 module. If you upgrade
your system software, you will need to re-run the Microsoft UAM Installer.
Installing User Authentication
Log on to the Microsoft UAM Volume on the system to access the MS UAM file. Then drag
this file to the AppleShare Folder in your System Folder.
7-16
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
To gain access to the Microsoft Authentication files on the system, perform the following
steps:
1
2
Click Chooser on the Macintosh Apple menu.
Double-click the AppleShare icon, and then click the AppleTalk zone in which the
system with Services for Macintosh resides.
Ask your system administrator if you are not sure of the zone.
3
4
5
6
Select the system from the list of file servers, and click OK.
Click Registered User or Guest, and then click OK.
Select the Microsoft UAM Volume, and then click OK.
Close the Chooser dialog box.
To install the authentication files on the Macintosh workstation, perform the following
steps:
1
2
3
Double-click the Microsoft UAM Volume on the Macintosh desktop.
Double-click the Microsoft UAM Installer file on the Microsoft UAM volume.
Click Continue in the Installer Welcome screen.
The installer will report whether the installation succeeded.
If the installation has succeeded, Macintosh users of this workstation will be offered
Microsoft Authentication when they connect to the system.
Adapter Bindings
FSM can bind to only one network adapter. By default, it is bound to the embedded
10/100TX Network Adapter. To change the binding in systems with multiple network
adapters, the AppleTalk Protocol Properties for the network adapter to be used by AppleTalk
must be modified to accept inbound connections.
AppleTalk Protocol Adapter Binding
To modify the AppleTalk protocol adapter binding for Filers with multiple network
adapters, perform the following steps from the NAS Manager:
1
2
3
On the NAS Manager primary menu, click Maintenance.
Click Interfaces.
Click the radio button next to the adapter you want to use for the AppleTalk protocol.
Adva nced Fea tur es
7-17
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
On the Tasks menu, click AppleTalk.
Click the check box next to Enable inbound AppleTalk connections on this adapter.
(Optional) If you use AppleTalk zones, select the appropriate zone in the dropdown
box.
7
Click OK.
Services for NetWare
Services for NetWare (SFN) are compatible with Novell NetWare Bindery service for
authentication and file access using the internetwork packet exchange/sequenced packet
exchange (IPX/SPX) network protocol.
Configuring the NWLink IPX/SPX Compatible Protocol
To configure this protocol, you need the internal network number, the frame type, and the
network number.
Internal Network Number
Internal network numbers are used for internal routing and are generally only needed for
servers. You should not need to change this option on your system.
Frame Type and Network Number
Frame types define the packet formats that are used by different networks. It is important
that all systems in a network have the same frame type, so that they can communicate with
the rest of the network.
When you are configuring your system, it attempts to autodetect the frame type for the
client. In most cases, this is successful. However, occasionally the autodetect feature
chooses an inappropriate frame type, usually because more than one frame type exists on
the network. If this happens, you should manually set the frame type to match the one
specified on your NetWare server. Note that if more than one frame type exists, choose the
one that would be detected first. For example, if frame type Ethernet 802.2 and Ethernet
802.3 are bound to the same segment, then configure frame type Ethernet 802.2. The order
of detection is Ethernet 802.2, Ethernet 802.3, Ethernet II, and then Ethernet SNAP.
7-18
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
Microsoft Directory Synchronization Services
Microsoft Directory Synchronization Services (MSDSS) lets you synchronize a wide variety
of data stored in the Active Directoryservice with Novell Directory Service (NDS) and
NetWare 3.x binderies.
MSDSS is a highly flexible service that helps Novell users:
•
•
•
Adopt Windows 2000 Server and the Active Directory service.
Reduce directory management through two-way synchronization.
Migrate NDS and bindery information to Windows 2000 Server.
MSDSS supports two-way synchronization with NDS and one-way synchronization with
NetWare 3.x binderies to provide a complete directory interoperability solution. MSDSS
also supports password synchronization and provides a directory migration service.
MSDSS allows NetWare users to deploy Active Directory without having to replace existing
directories or bear the cost of managing two separate directories. As a result, users have the
flexibility to:
•
•
•
Consolidate directory management when multiple directories are required.
Manage accounts from either directory.
Use directory-enabled applications, devices, and services based on the Windows 2000
Active Directory service.
MSDSS is easy to use and makes synchronization and Active Directory setup easy through
its management interface. It is fully-featured to allow users a choice of management,
synchronization, and migration options.
MSDSS supports all major NetWare platforms and most Novell directories and binderies,
and it includes support for IPX/SPX and TCP/IP network protocols.
Windows 2000 MSDSS Domain Controller
To implement MSDSS, you must install the Windows 2000 Server operating system and
the MSDSS software (available on the Microsoft Services for NetWare Version 5 CD) on at
least one system. In Windows 2000, when you promote a system running Windows 2000
Server to an Active Directory server, it becomes a domain controller. You use this domain
controller to configure Active Directory, to install MSDSS, and then to import information
from the existing NetWare environment.
Adva nced Fea tur es
7-19
Download from Www.Somanuals.com. All Manuals Search And Download.
The larger the environment, the more new servers you will need. If you are planning to have
more than one domain, then you will need new hardware for the first domain controller in
each domain.
You must also install Novell Client Access software on the MSDSS server or servers.
MSDSS uses Novell Client Access to authenticate and to gain access to NDS. While
accessing NDS, it authenticates, but does not use a license. MSDSS also uses Novell Client
Access to map one directory’s contents to another, taking into account the fact that the
object classes in Novell’s NDS or bindery directories are different from Active Directory
object classes. Novell Client Access is also required in order to use File Migration Utility to
migrate files.
You can install Novell Client Access in four modes: IP only, IPX only, IP and IPX combined,
and IP with IPX Compatibility Mode. Most NetWare environments still use IPX today.
MSDSS works in all these modes because it uses Novell Client Access to access the lower
layers.
If you are migrating NDS, you can import the user and group information from one NDS
server to the MSDSS server, because you have one user database per tree. You can then
migrate the file system. Remember that each Novell server has its own file system, which is
not replicated to other servers (whereas NDS is replicated to other servers). After the files
are migrated, you can uninstall NDS from the server to free up the hardware for the
Windows 2000 Server operating system.
Outline of the Deployment Procedure
The next two sections describe the procedures for implementing MSDSS in a smaller (local
area network (LAN) only) or larger (wide area network (WAN)) network. You need to adapt
the guidelines to suit your environment and goals.
Small Environment
A small company with a LAN-based and uncomplicated network is often a likely candidate
for a quick migration. After doing all the preparations described in the above section,
perform these steps (adjusted, if necessary, to your situation):
1
2
Back up your NetWare system and user data.
Install and configure a Windows 2000 domain controller (see the documentation that
comes with your operating system software).
3
Install the Novell Client for Windows 2000 from the Novell Web site
(http://www.novell.com/download/).
7-20
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Replace services or applications that require NDS with software compatible with
Active Directory. (NDS applications should be moved before you begin using MSDSS,
except for ZENworks, which can be replaced by IntelliMirror at any time.)
Install MSDSS from the system DomainUtils share.
NOTE: To access MSDSS software, map a network drive to \\< Dellxxxxxxx> \DomainUtils
where < Dellxxxxxxx> is the name of the PowerVault 75xN system.
6
7
Log on to the NDS tree or bindery server as Administrator.
Log on to the appropriate Windows 2000 domain as a member of the Domain Admins
group.
8
9
On the MSDSS server, open the Help files, and then print out the procedures “To
perform a one-time migration” and “To migrate files.”
Click the Start button and point to Programs—> Administrative Tools—> Directory
Synchronization to start MSDSS.
10 Follow the instructions as described in the Help printout “To perform a one-time
migration.” The prompts will guide you through the following steps:
a
Right-click MSDSS in the console tree, and then click New Session to start the
New Session Wizard.
b
c
d
Specify whether objects will be copied from NDS or Bindery.
Click Migration.
If you plan to migrate files as well as directory objects, click the Migrate Files
check box.
You will also run the File Migration utility.
e
Specify the path to the Active Directory container into which you want to copy
items.
f
Accept the default domain controller in which to store the migration log.
Specify the NDS Container or Bindery Container from which to copy items.
Provide the name and password of the Novell administrative account.
g
h
i
On the Initial Reverse Synchronization page, specify Password Options (such as
“Set passwords to the user name.”)
When you are performing a migration, this page does not include the option to
actually perform an initial reverse synchronization, but it is the page where you
specify which password option you want to use.
j
Set synchronization mode to default object mapping or to custom object
mapping.
Adva nced Fea tur es
7-21
Download from Www.Somanuals.com. All Manuals Search And Download.
k
l
If you select custom object mapping, you will be prompted to manually establish
one-to-one relationships between pairs of objects.
Click Finish.
After the user accounts are migrated, you can migrate the file system (migrating the users
before the files allows you to migrate file-system permissions). Follow the instructions as
described in the Help printout “To migrate files.” The prompts will guide you through the
following steps:
•
To start the File Migration Utility click the Start button and point to Programs—>
Administrative Tools—> File Migration Utility.
•
•
To view mapping relationships, click View Maps.
To view mapped access rights for the users, groups, organization units, and
organizations to be migrated, click Access Rights.
The NDS Modify right converts, by default, to Read because it does not have an
equivalent NFTS right. You might want to click the Write check box to allow
read/write access.
•
•
On the Step 2 - Security Accounts tab, verify that you are logged on with the correct
Active Directory, NDS, or Bindery credentials.
On the Step 3 - Source and Target tab, under Source (NDS/Bindery), click the
volume or directories from which you want to migrate files. Under Target (Active
Directory), click the shares or directories to which you want to migrate files, click the
Map button, and then click Next.
If the NDS or Bindery volume you selected in the source tree indicates Unavailable,
then you are not currently logged on to that tree or Bindery server. Log on, and then
press < F5> after reselecting the volume to view the directories within the displayed
volume.
•
•
On the Step 4 - Log File tab, choose your logging options and then click Next.
On the Step 5 - Scan tab, click Scan, and then click Next.
The utility scans all source volumes and counts and displays the number of directories
and files in each. It ensures that proper access has been given to each source volume,
directory, and file. If any errors occur, the utility displays them respectively under
NetWare scan logs and Windows scan logs. You can select a number of acceptable
errors; if this number is exceeded, the process aborts, letting you return to previous
steps to correct the errors.
•
On the Step 6 - Migrate tab, click Migrate.
7-22
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
Manually migrate (or use third-party utilities to migrate) object security permissions and
system accounts, printer objects, application objects, and other objects that MSDSS does
not migrate from Bindery or NDS to Active Directory. (MSDSS migrates NetWare user
accounts, groups, and distribution lists for Bindery and NDS, and, for NDS only, MSDSS
also migrates NDS organizational units and organizations.)
1
Upgrade your NetWare server(s) to the Windows 2000 Server or Professional operating
system.
2
On each Windows desktop in your NetWare network, uninstall Novell Client Access.
You will configure the desktops to join the Windows 2000 domain.
3
4
Optionally, upgrade NetWare clients (workstations) to the Windows 2000 Professional
operating system.
Configure all client systems (both Windows and non-Windows), to join the
Windows 2000 domain.
Be sure the users know how to handle their password for the first time they log on (for
possible password options, see “MSDSS Password Management” in “MSDSS
Deployment: Understanding Synchronization and Migration)” available at
http://www.microsoft.com.
Medium-Sized or Large Environment
An organization large enough to have WAN links will probably choose either to synchronize
its networks temporarily while performing a gradual migration over time (up to three
months for a large network), or it will prefer to use synchronization to establish a mixed
Novell/Windows 2000 network on a long-term basis. If you plan a staged migration, one-way
synchronization is often the appropriate choice.
After doing all the preparation described above, perform the following steps (adjusted, if
necessary, to your situation):
1
2
Back up your NetWare user and system data.
Install and configure a Windows 2000 domain controller (see the documentation that
comes with your operating system software).
3
4
Install the Novell Client for Windows 2000 from the Novell Web site
http://www.novell.com/download/.
Install MSDSS from the PowerVault 75xN system DomainUtils share.
NOTE: To access MSDSS software, map a network drive to \\< Dellxxxxxxx> \DomainUtils
where < Dellxxxxxxx> is the name of the PowerVault 75xN system.
Adva nced Fea tur es
7-23
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Log on to the NDS tree or Bindery server with administrative credentials.
Log on to the appropriate Windows 2000 domain as a member of the Domain Admins
group.
7
8
On the MSDSS server, open the Help files, and then print out the steps (briefly
summarized below) for “To perform a one-way synchronization” or “To perform a
two-way synchronization.”
Click the Start button and point to Programs—> Administrative Tools—> Directory
Synchronization to start MSDSS, and let the prompts guide you through the
following tasks:
a
Start the New Session Wizard (right-click MSDSS in the console tree).
b
Select Novell Bindery or Novell Directory Services (NDS) for one-way
synchronization; or select Novell Directory Services (NDS) for two-way
synchronization.
c
Select One-way synchronization (from Active Directory to NDS or Bindery) or
select Two-way synchronization (from Active Directory to NDS and back).
d
Specify the path to the Active Directory container into which you want to copy
items.
e
f
Accept the default domain controller in which to store the session database.
Specify the NDS Container or Bindery Container from which to copy items.
Provide the name and password of the Novell administrative account.
g
h
On the Initial Reverse Synchronization page, select Perform an initial reverse
synchronization.
i
j
Still on the Initial Reverse Synchronization page, specify Password Options (such
as “Set passwords to the user name”).
On the Object Mapping Scheme page, click Default (to accept the default
mapping for each source and target directory pair), or (for NDS only) click
Custom and then Object Mapping Table (to specify objects for which you want
to establish a one-to-one relationship, regardless of the object location in either
directory tree). (MSDSS does not support custom object mapping for Bindery.)
k
l
Still on the Object Mapping Scheme page, click Filters if you want to configure a
filter for this synchronization session.
On the Session Name page, accept the default session name or specify a new
name.
m
Click Finish.
7-24
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
9
If you chose one-way synchronization, you should now perform all user, group, and OU
object management from Active Directory. If you established two-way
synchronization, you can now manage user, group, and OU objects from either Active
Directory or NDS.
10 If you plan long-term coexistence between Active Directory and NetWare, you are now
finished, unless you want to migrate a subset of users, computers, and/or files. If you
plan to continue by migrating in stages from NetWare to Active Directory, do the
following in the time-frame that is convenient for you:
•
•
•
Install and configure File and Print Services for NetWare (to let NetWare clients
Replace services or applications that require NDS with commensurate software
compatible with Active Directory. Perform large conversions (such as GroupWise
to Exchange) as separate projects.
Migrate the pilot group of users and their files (adapt instructions from the
migration steps provided in the “Small Environment”section). Get the pilot
group’s feedback, and then set a schedule to migrate additional groups of users,
according to the priorities you have established.
•
Migrate the rest of the users as appropriate (for example, if you migrate the set of
applications they use, it is time to migrate them as well).
For further information see the Novell Web site,
http://support.novell.com/servlet/Knowledgebase and the Windows 2000 Web site,
http://www.microsoft.com/windows2000.
Uninterruptible Power Supply (UPS)
When you are in Terminal Services Advanced Client, you can control the settings for your
UPS. In Power Options on the Control Panel, the operating system includes default
settings for an American Power Conversion Uninterruptible Power Supply.
The default settings are:
•
Enable all notifications.
–
–
Seconds between power failure and first notification: 5
Seconds between subsequent power failure notifications: 120
•
•
Shut down when the UPS battery is almost exhausted.
Turn off the UPS.
Adva nced Fea tur es
7-25
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are using a UPS and want to change these settings, you need to connect a keyboard,
mouse, and monitor to the system. See Microsoft Windows 2000 Help for more
information.
The system is configured to accept a serial connection from the UPS in serial port 2, called
the UPS port in the Dell PowerVault 750N Systems Installation and Troubleshooting Guide
and the Dell PowerVault 755N Systems Installation and Troubleshooting Guide. By default,
this serial port is configured to interact with APC Smart-UPS systems.
See the documentation for your UPS for more information on how to use it.
Upgrading to a Multiprocessor System
When upgrading your PowerVault 75xN NAS appliance from microprocessor to two
microprocessors, the hardware abstraction layer (HAL) must be updated to enable your
system to use the extra processor.
NOTE: If your system contained two processors when you received it, you do not need to
perform this procedure.
NOTE: If you have a two-processor system and reinstall the operating system from the
Reinstallation CD, you do not need to perform this procedure. The operating system reinstall
includes this upgrade.
To update the HAL file on your NAS appliance follow the following procedure:
1
2
3
4
Open the NAS Manager, and click the Maintenance tab.
Click Terminal Services.
When prompted, log on to a Terminal Services Advanced Client session.
In the PowerVault Advanced Administration Menu, click Administrative Tools and
then click Computer Management to launch the Computer Management Console.
5
6
7
8
In the left panel, browse to Computer Management (local)—> System Tools—>
Device Manager.
In the right panel, double-click Computer to expand the branch. Ensure that you have
ACPI Uniprocessor PC support.
Double-click the computer type (ACPI Uniprocessor PC) that is listed under the
Computer branch, click the Drivers tab, click Update Driver, and then click Next.
Click Display a list of known drivers for this device.
7-26
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Click the appropriate computer type (ACPI Multiprocessor PC), click Next, and then
click Finish.
10 When prompted, click yes to reboot your system.
Using Secured Socket Layers
This section explains how secured socket layers (SSL) are used in the NAS appliance. It also
explains how to use your own certificate if you have one and how to regenerate your
certificate.
Introduction to SSL Certificates
Certificates contain information that is used to establishing system identities over a
network. This identification process is called authentication. Although authentication is
similar to conventional forms of identification, certificates enable Web servers and users to
authenticate each other before establishing a connection to create more secure
communications. Certificates also contain encryption values, or keys, that are used in
establishing a Secure Sockets Layer (SSL) connection between the client and server.
Information, such as a credit card number, sent over this connection is encrypted so that it
cannot be intercepted and used by unauthorized parties.
Two types of certificates are used in SSL. Each type has its own format and purpose. Client
certificates contain personal information about the clients requesting access to your site
that allows you to positively identify them before allowing them access to the site. Server
certificates contain information about the server that allows the client to positively identify
the server before sharing sensitive information.
Server Certificates
To activate your Web server's SSL 3.0 security features, you must obtain and install a valid
server certificate. Server certificates are digital identifications containing information about
your Web server and the organization sponsoring the server's Web content. A server
certificate enables users to authenticate your server, check the validity of Web content, and
establish a secure connection. The server certificate also contains a public key, which is used
in creating a secure connection between the client and server.
Adva nced Fea tur es
7-27
Download from Www.Somanuals.com. All Manuals Search And Download.
The success of a server certificate as a means of identification depends on whether the user
trusts the validity of information contained in the certificate. For example, a user logging on
to your company's Web site might be hesitant to provide credit card information, despite
having viewed the contents of your company's server certificate. This may be especially true
if your company is new and not well known.
For this reason, certificates are sometimes issued and endorsed by a mutually trusted,
third-party organization, called a certification authority (CA). The certification authority's
primary responsibility is confirming the identity of those seeking a certificate, thus ensuring
the validity of the identification information contained in the certificate.
issue your own server certificates. For example, in the case of a large corporate intranet
handling employee payroll and benefits information, corporate management may decide to
maintain a certificate server, and assume responsibility for validating identification
information and issuing server certificates. For more information, see “Obtaining a Server
Certificate From a Certification Authority.”
PowerVault 750N/755N Certificate
By default, the PowerVault 750N/755N has a self-generated and self-signed certificate. The
configured SSL port is 1279.
NOTE: For non-SSL communication, use port 1278. This port is not a secure port and all text
is sent in plain text over the network.
Using a Custom Certificate
If a certification authority (CA) is present in the network, the Administrator can choose to
change the default PowerVault 750N/755N certificate. The Administrator must then use
the wizards to first request a certificate and then apply it to the appliance.
Obtaining a Server Certificate From a Certification Authority
NOTE: If you are replacing your current server certificate, the Internet Information Services
(IIS) will continue to use the old certificate until the new request has been completed.
Find a certification authority that provides services that meet your business needs and then
request a server certificate.
NOTE: For the latest list of certification authorities supporting IIS, visit the Microsoft Security
Web site. In the By Category list, select Certification Authority Services.
7-28
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
To obtain a server certificate, perform the following steps:
1
2
3
4
On the PowerVault NAS Manager primary menu, click Maintenance.
On the Maintenance page, click Terminal Services.
Log on to an Terminal Services Advanced Client session.
In the Advanced Administration Menu, click System Management, and then from
the list, click Internet Information Services
5
6
Navigate to and right-click on the Administration site section, and select Properties
Under Secure Communications on the Directory Security property sheet, click Server
Certificate to access the Web Server Certificate Wizard.
7
8
Use the Web Server Certificate Wizard to create a certificate request.
Send the certificate request to the certification authority.
They will process the request and send you the certificate.
NOTE: Some certification authorities require you to prove your identify before processing
your request or issuing you a certificate.
9
Use the Web Server Certificate Wizard to install your certificate.
For more information about SSL, see the Internet Information Services online help.
Console Redirection
Console redirection allows you to maintain a NAS appliance from a remote location by
redirecting keyboard input and text output through the serial port. Graphic output is not
redirected. Console redirection can be used under the disk operating system (DOS) for
tasks such as setting up a common basic input/output system (BIOS) configuration or
setting up a redundant array of independent disks (RAID) configuration. In a typical
installation, the system is connected to a port concentrator that allows you to connect
several systems via a shared modem. After you use a modem or other remote connection to
log into the port concentrator, you can select which system you want to manage with
console redirection. This document describes the simplest connection possible: connecting
to a system with a null modem cable.
Adva nced Fea tur es
7-29
Download from Www.Somanuals.com. All Manuals Search And Download.
Minimum Hardware and Connection Requirements
To use console redirection, you must have the following:
•
An available serial port (COM port) on a client system (This port must not conflict
with any other ports on the system.)
•
Available serial port 1 (COM 1) on the NAS appliance
NOTE: Console Redirection is enabled by default in the NAS appliance BIOS.
A null modem cable to connect the server to the client system
•
Software Requirements
Your remote terminal emulation software should meet the following specifications:
•
American National Standards Institute (ANSI) or VT100/220 terminal emulation with
a window size of 80 x 25 characters
•
•
9600, 19.2K, 57.6K, or 115.2K bits per second (bps) via serial (COM) ports
Recommended: the ability to create keyboard command macros
All versions of the Microsoft® Windows® operating systems come with HyperTerminal
terminal emulation software. However, the version of HyperTerminal included with most
Windows operating systems does not provide the correct screen size, the arrow and function
keys do not work, and there is no method of creating macros. It is recommended that you
either upgrade your version of HyperTerminal to HyperTerminal Private Edition 6.1 or later
or select new terminal emulation software. You may be eligible for a free upgrade from your
current version of HyperTerminal from Hilgraeve at http://www.hilgraeve.com.
Configuring Console Redirection on the System
Console redirection is enabled by default for VT100/220 using serial port 1 (COM 1). If you
decide to reconfigure console redirection or disable it, go through the system setup
program. The Console Redirection field allows you to select only the terminal type. The
options available are listed in Table 7-2.
Ta b l e 7 - 2 . Te r m i n a l E m u l a t i o n Typ e s
Terminal Type
ANSI
Terminal Emulation
ANSI. Used for utility partition applications or MS-DOS.
VT100/220. Used for utility partition applications or MS-DOS.
VT100/220
7-30
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
If you select VT100/220 but not all the characters are visible on the screen, you should go
back to the system setup program and select ANSI as your terminal type. ANSI can display
the full set of ASCII characters.
Configuring Console Redirection on the Client System
NOTE: The examples in this document assume that you have upgraded to Hilgraeve’s
HyperTerminal Private Edition 6.1 or later. If you are using other terminal emulation software,
see the help file for that software.
Configuring the Ports
1
Click the Start button, point to Programs—> Accessories—> Communications, and
click HyperTerminal.
2
3
4
Enter any name for the new connection and select any icon.
Click OK.
From the Connect to pulldown menu, select a COM port available on your client
system and click OK.
After you have selected an available COM port, the COM port properties window is
displayed.
5
Select Bits per second.
Console redirection supports 9600, 19.2K, 57.6K, or 115.2K bps.
6
7
8
9
Set Data bits to 8.
Set Parity to None.
Set Stop bits to 1.
Set Flow control to Hardware.
10 Click OK.
Configuring the Terminal Settings
After you configure the ports, configure the terminal settings by performing the following
steps:
1
2
3
In HyperTerminal, click File, click Properties, and select the Settings tab.
Make sure that the Function, arrow, and ctrl keys act as field is set to Terminal Keys.
Make sure that the Backspace key sends field is set to Ctrl+ H.
Adva nced Fea tur es
7-31
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Change the Emulation setting from Auto detect to ANSI or VT100/220.
This setting should be the same as the setting you selected for the Console
Redirection field on the server.
When you click Terminal Setup, you should see a setting for the number of rows and
columns.
Change the number of rows from 24 to 25 and leave the number of columns at 80. If
you do not have these settings, then this is an indication that you must upgrade your
terminal emulation software.
Rebooting the System
Console redirection is designed to yield control of the serial ports to the operating system,
which allows serial debugging and redirection of the operating system to function correctly
without interference from the system BIOS.
To use console redirection to shut down a system and troubleshoot it or to change small
computer system interface (SCSI) BIOS configurations, perform the following steps:
1
Restart the system. See “Configuring Special Keys,” found later in this document, for
a recommendation on how to do this.
2
When the system begins to reboot, use console redirection to watch and interact with
the system during the power-on self-test (POST). While the system is booting, you
can do the following:
•
•
Enter the system setup program.
Enter the SCSI setup menus.
Configuring Special Keys
Console redirection uses ANSI or VT100/220 terminal emulation, which are limited to basic
ASCII characters. There are no function keys, arrow keys, or control keys in this character
set. However, most BIOS software requires the use of function keys and control keys for
ordinary functions. You can emulate a function key or control key by using a special key
sequence, called an escape sequence, to represent a specific key.
7-32
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
terminal emulation software. For example, 0x1b, ^ [, and < Esc> all refer to the same
escape character. Some terminal software uses predefined macros to send the proper escape
sequences. In HyperTerminal, you can define macros by selecting Key Macros from the
View menu. Macros can be assigned to almost any possible key for almost any key
combination. Create a macro for each of your function keys. Table 7-3 and Table 7-4 list
the escape sequence that must be sent to represent a special key or command.
NOTE: When defining macros in HyperTerminal, you must press < Ins> before < Esc> to
signify that you are sending an escape sequence rather than escaping out of the dialog box.
Ta b l e 7 - 3 . VT1 0 0 / 2 2 0 S u p p o r t e d E s c a p e S e q u e n c e s
Key
Supported
Sequences
Terminal
Emulation
Up arrow
< Esc> [ < Shift> a
< Esc> [ < Shift> b
< Esc> [ < Shift> c
< Esc> [ < Shift> d
< Esc> < Shift> op
< Esc> < Shift> oq
< Esc> < Shift> or
< Esc> < Shift> os
< Esc> < Shift> ot
VT100/220
VT100/220
VT100/220
VT100/220
VT100/220
VT100/220
VT100/220
VT100/220
VT100
Down arrow
Right arrow
Left arrow
F1
F2
F3
F4
F5
F6
< Esc> < Shift> ou
< Esc> [ 1 7 ~
VT100
VT100/220
F7
< Esc> < Shift> ov
< Esc> [ 1 8 ~
VT100
VT100/220
F8
< Esc> < Shift> ow
< Esc> [ 1 9 ~
VT100
VT100/220
F9
< Esc> < Shift> ox
< Esc> [ 2 0 ~
VT100
VT100/220
F10
< Esc> < Shift> oy
< Esc> [ 2 1 ~
VT100
VT100/220
Adva nced Fea tur es
7-33
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 7 - 3 . VT1 0 0 / 2 2 0 S u p p o r t e d E s c a p e S e q u e n c e s
Key
F11
F12
Supported
Sequences
Terminal
Emulation
< Esc> < Shift> oz
< Esc> [ 2 3 ~
VT100
VT100/220
< Esc> < Shift> oa
< Esc> [ 2 4 ~
VT100
VT100/220
Home
< Esc> [ 1 ~
< Esc> [ 4 ~
< Esc> [ 2 ~
< Esc> [ 3 ~
< Esc> [ 5 ~
< Esc> [ 6 ~
VT220
VT220
VT220
VT220
VT220
VT220
End
Insert
Delete
Page Up
Page Down
Shift-Tab
< Esc> [ < Shift> z
< Esc> [ 0 < Shift> z
VT100
VT220
Ta b l e 7 - 4 . AN S I S u p p o r t e d E s c a p e S e q u e n c e s
Ke y
Sup p orte d Se q ue n ce s
<Esc> [ <Shift>a
<Esc> [ <Shift>b
<Esc> [ <Shift>c
<Esc> [ <Shift>d
<Esc> <Shift>op
<Esc> <Shift>oq
<Esc> <Shift>or
<Esc> <Shift>os
<Esc> <Shift>ot
<Esc> <Shift>ou
<Esc> <Shift>ov
Up arrow
Down arrow
Right arrow
Left arrow
F1
F2
F3
F4
F5
F6
F7
7-34
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 7 - 4 . AN S I S u p p o r t e d E s c a p e S e q u e n c e s
Ke y
F8
Sup p orte d Se q ue n ce s
<Esc> <Shift>ow
<Esc> <Shift>ox
<Esc> <Shift>oy
<Esc> <Shift>oz
<Esc> <Shift>oa
F9
F10
F11
F12
After you create these macros, pressing < F1> on the keyboard while running the terminal
are transmitted, the system interprets them as < F1> . You need this functionality to change
the settings in the System Setup program or to continue if there is an error on your system
and you are prompted to press < F1> .
In addition to macros for the function keys, it is recommended that you set up macros for
the additional escape sequences listed in Table 7-5.
.
Ta b l e 7 - 5 . Ad d i t io n a l E s c a p e S e q u e n c e s
Key Combination
< Alt> key
Supported Sequence
< Esc> key
< Ctrl> < Alt> < Del>
< Esc> < Shift> r < Esc> r < Esc> < Shift> r
(This combination reboots the server.)
< Ctrl> < Shift> i
< Ctrl < Shift> j
< Ctrl> < Shift> h
< Ctrl> < Shift> m
< Ctrl> 2
< Esc> < Ctrl> < Shift> i
< Esc> < Ctrl> < Shift> j
< Esc> < Ctrl> < Shift> h
< Esc> < Ctrl> < Shift> m
< Esc> < Ctrl> 2
Adva nced Fea tur es
7-35
Download from Www.Somanuals.com. All Manuals Search And Download.
Defragmenting a Volume Containing Persistent
Images
NOTICE: Defragmenting a volume containing persistent images without using the following
procedure can delete your persistent images and will degrade your system performance.
NOTE: If you do not have persistent images on your volume, this procedure does not apply.
NOTE: To defragment a volume, you must delete all persistent images on that volume.
To defragment a volume containing persistent images, perform the following steps:
1
2
3
4
5
6
7
8
9
On the NAS Manager primary menu, click Disks.
Click ActiveArchive.
Click Schedules.
Select a scheduled persistent image and click Delete.
Repeat until all scheduled persistent images are deleted.
Click Back.
Click Persistent Images.
Select a persistent image and click Delete.
Repeat until all persistent images are deleted.
10 Click Maintenance.
11 Click Terminal Services.
12 Log in to the system.
13 Click Exit to close the Advanced Administration Menu.
14 Double-click My Appliance.
15 Right-click the drive you are going to defragment.
16 Click Properties.
17 Click Tools.
18 Click Defragment Now.
The Defragmentation window displays.
7-36
Adva nced Fea tur es
Download from Www.Somanuals.com. All Manuals Search And Download.
19 Click Defragment.
You are notified when defragmentation is complete.
20 Exit Terminal Services Client.
21 Reschedule your persistent images for this volume.
Adva nced Fea tur es
7-37
Download from Www.Somanuals.com. All Manuals Search And Download.
www. d e l l . c o m | s u p p o r t . d e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
Dell OpenManage™ Server Diagnostics is a suite of diagnostic programs that run locally on
your Dell™ PowerVault™ NAS appliance or remotely on a NAS appliance connected to the
network. You select diagnostic tests to run from a hierarchical menu that represents a NAS
appliance’s hardware. You can select tests for various parts of an appliance and run them
simultaneously or sequentially in a single session. You can view results for each individually
selected test module.
Server Diagnostics diagnoses problems on individual appliances. It does not address
problems that arise on the network level, unless the problem resides with a specific network
interface controller (NIC) on a single appliance.
Features
Server Diagnostics offers test modules for the following appliance components. Some tests
can be run only on the local system.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Microprocessor
Hard-disk drive
Diskette drive
DVD/CD drive
Tape drive
Memory
Peripheral component interconnect (PCI) bus
Modem
Small computer system interface (SCSI)
Serial port
Parallel port
Self-monitoring, analysis, and reporting technology (SMART) drive
Extended SMART drive
NIC
Complimentary metal-oxide semiconductor (CMOS)
Keyboard (local system only)
Mouse (local system only)
8-2
Online S er ver Dia gnost ics
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Monitor (local system only)
Printer (local system only)
Video (local system only)
Installing the Online Server Diagnostics
NOTE: To perform these steps you must be using a NAS Manager Terminal Services Advanced
Client session.
To log on to a Terminal Services Advanced Client session, perform the following steps:
1
2
3
4
5
Log on to the NAS Manager.
On the NAS Manager primary menu, click the Maintenance tab.
On the Maintenance page, click Terminal Services.
Log in to a Terminal Services Advanced Client session.
In the Advanced Administration Menu window, click Exit and then OK to close the
window and return you to the NAS desktop.
To install the Server Diagnostics, perform the following steps:
1
Insert the Dell PowerVault 75xN Resource CD into the CD drive of your NAS
appliance.
2
If the installation program does not start automatically, click the Start button and click
Run.
3
4
5
6
7
8
In the Run dialog box, click Browse, double-click the CD, and double-click setup.exe.
Click Next to display the Resource CD menu.
Click Resources.
Click Install Dell Online Server Diagnostics to launch the InstallShield Wizard.
In the InstallShield Wizard window, click Next.
Read the software license agreement and click Yes if you accept the terms of the
agreement.
9
Enter you name and the company name and then click Next.
10 Click Next.
11 Click Next to add program icons.
Online S er ver Dia gnost ics
8-3
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Click Next.
13 When the InstallShield Wizard completes installing the files, click Finish.
Installing the JAVA Runtime Environment
If your system does not have the Java 2 Runtime Environment installed on it, you will be
asked whether you want to install it the first time you run the Online Server Diagnostics.
1
Because the Java 2 Runtime Environment is needed to run the Online Server
Diagnostics, click Yes.
2
3
Click Yes to accept the agreement.
Click Next.
After the installation is completed, you can run the Online Server Diagnostics.
Using the Online Server Diagnostics
This section explains how to start, configure, and run your server diagnostics:
Starting the Online Server Diagnostics
To start the diagnostics, perform one of the following procedures:
1
2
On the NAS Manager primary menu, click Maintenance.
Click Online Server Diagnostics.
Specifying a Target Appliance
NOTE: Online Server Diagnostics must be installed on both the remote appliance and the local
appliance.
To specify the NAS appliance on which you want to run diagnostic tests (the target),
perform the following steps:
If you have not already done so, start the diagnostics.
In the Welcome window, perform one of the following tasks:
•
To run diagnostics on the local server, click Run diagnostics on
NNN.NNN.NNN.NNN.
8-4
Online S er ver Dia gnost ics
Download from Www.Somanuals.com. All Manuals Search And Download.
•
To run diagnostics on a remote appliance on the network, specify the IP address of the
remote appliance in the Remote IP Address box, and then click Run diagnostics on
specified IP.
In the remote login window, type the user ID of a local administrator group member
for the specified appliance in the User Name box, and click Login.
This action opens the main window, from which you may select and run diagnostic
tests.
Configuring Online Server Diagnostics
Server Diagnostics enables you to set the preferred options for running diagnostic tests.
To set the options in Server Diagnostics, perform the following steps:
1
2
3
4
If you have not already done so, start the Server Diagnostics.
Specify a target NAS appliance.
In the main window, click Advanced Settings.
In the Advanced Settings window, set the options you need. See “Advanced Settings”
for a description of each option.
Running Online Server Diagnostics
To run a diagnostic, perform the following steps:
1
2
3
If you have not already done so, start the Server Diagnostics.
Specify a target NAS appliance.
In the main diagnostics window, use the component selector to specify the
components you want to test.
•
•
Use the diagnostic tree to select the individual tests you want to run.
Click Select All to select all tests in the tree. To erase your selections, click Clear
All.
4
5
Click Next.
The Progress window opens and the diagnostic tests begin. Use the progress viewer to
monitor the success or failure of each test.
When the tests finish, click View Log to see detailed results for each test.
Online S er ver Dia gnost ics
8-5
Download from Www.Somanuals.com. All Manuals Search And Download.
6
If a test fails, click View Details to see a brief description of why the test failed.
NOTICE: Do not use your browser's refresh function while running Server Diagnostics. This
function closes the Server Diagnostics window without stopping the test and causes the following
error message to be displayed: The diagnostic engine is busy. This may be
due to either an improper logoff or someone else running the
diagnostics on this machine. In the case of an improper logoff,
please wait xx minutes for the diagnostic engine to time out. (XX
is the Default_timeout setting, which is initially set to 10
minutes.) Click here to close this window.
Exiting Diagnostics
To exit the Server Diagnostics program, click Logoff.
NOTE: If you close the server diagnostics window without clicking Logoff, you must either wait
10 minutes or log off your system completely before you can restart Server Diagnostics.
For further information, refer to the Online Help available within the Server Diagnostics.
Learning About Diagnostic Tests
To get detailed information about specific diagnostic tests, perform the following steps:
1
2
3
If you have not already done so, start the Server Diagnostics.
Specify a target NAS appliance.
In the main window, use the component selector to specify the component that you
want to test.
4
Click Learn More to open a secondary window that describes the tests available for
the selected component.
8-6
Online S er ver Dia gnost ics
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
®
®
I cannot access my Dell
ActiveArchive™ from an NFS
or Macintosh Client.
Only Microsoft Windows
Access ActiveArchive folders
through the
Windows client to perform
data recovery.
(CIFS) clients can access the
persistent images stored in the
ActiveArchive folders for each
volume.
I am trying to select the
Administer My Appliance
link on the opening page of
the PowerVault NAS Manager,
but the link does not function
properly.
The User account that you
used to log in to the domain
does not have administrator
privileges. The link does not
work for people without
Type the address of the
PowerVault NAS Manager
manually in your browser.
Type http://< server-name or IP
address> :1278 for non-SSL
connections and
administrator privileges.
https://< server-name or IP
address> :1279 for SSL
connections.
XCOPY will not copy my
persistent images.
Dell ActiveArchive is enabled.
XCOPY will not read the
Do not use XCOPY to copy
persistent images.
persistent images on a volume.
I have just deleted a volume in
Dell OpenManage™ Array
Manager and now I am unable
to view my shares in the
In the event that a volume
with shares is deleted,
Use Terminal Services
Advanced Client to remove
the shares for the deleted
volume. Exit PowerVault NAS
Manager and restart. Shares
should be visible.
PowerVault NAS Manager will
not display any shares until
the shares that were directed
to the deleted volume are
removed.
PowerVault NAS Manager.
I have just added an HTTP
share but cannot see it from
PowerVault NAS Manager.
For security purposes,
directory browsing is not
enabled by default on an
HTTP share directed to the
same folder or volume as
another share for security
purposes.
To enable directory sharing for
an HTTP share, from the
PowerVault NAS Manager
Maintenance page, click
Terminal Services Advanced
Client and modify the Web
sharing properties of the
folder.
9-2
Troubleshoot ing
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I am getting event errors for
Services for Macintosh.
Services for Macintosh are
bound to the onboard network
interface card (NIC) by
default. If this NIC has been
disabled, binding errors will
occur.
Bind the AppleTalk protocol
to an enabled NIC. See
“AppleTalk Protocol Adapter
Binding.”
I configured the system using
Kick-Start and I cannot get to
the PowerVault NAS Manager
using a browser.
The system may not be
connected to the network, or
the network settings may not
be correct.
Check to make sure that the
correct IP address in the
Kick-Start Application Menu.
If the problem persists, use
the serial port as described in
the “Configuring Your System
Using a Serial Connection” to
access the PowerVault NAS
Manager and check that the
configuration settings were
correct.
From a Macintosh client,
users cannot modify or delete
a file that a Windows client
has accessed.
The time is not properly
synchronized between clients
and the system.
Make sure that clients have
their time synchronized
within ten minutes relative to
the time zone.
I rebooted through the
PowerVault NAS Manager
from a Macintosh client.
Several minutes have passed
and the page has not
refreshed.
PowerVault NAS Manager
does not automatically refresh
the screen when the NAS
appliance has finished
rebooting.
Close Internet Explorer and
then reconnect to the
PowerVault NAS Manager.
I just created a new volume on
my system but cannot see the
volume on Windows Explorer
through Terminal Services.
Terminal Services will not
update to show a new volume
during the session in which it
was created.
Exit from Terminal Services
and reconnect. The volume
should now be visible.
Troubleshooting
9-3
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
Every time I try to do a
directory listing from an NFS
client on the root of a system
volume, I get an error
message, usually
Permission Denied.
The problem you will
Ignore this error. The System
Volume Information directory
is not used by NFS clients or
your system by default.
experience has to do with a
System Volume Information
directory, created by Microsoft
Index Server. The NFS service
does not have access to this
directory, and returns an error
to the client when trying to
list its properties.This issue
only occurs when sharing the
root of a drive letter.
I have just changed the IP
address of my system and now
I cannot administrate it
through PowerVault NAS
Manager.
Although the IP address
changed, your local host is still
trying to communicate with
the system using the old IP
address.
Close Microsoft Internet
Explorer (or for Linux only,
Netscape 6.0 or later). Re-start
the PowerVault NAS Manager.
In PowerVault NAS Manager if
I click OK and then click
Cancel, it doesn't seem to
cancel the operation.
Cancel does not dynamically
stop an update to the system
after you click OK.
If an operation has been
performed in error, the system
administrator must change
the setting back manually.
I see the following error
message in the event log: WMI
ADAP was unable to
load the winspool.drv
performance library
due to an unknown
problem within the
library: 0x0.
This is an issue with the
WDAP Performance library
and is documented on
Microsoft’s Web site.
Connect to the system via
Terminal Services Advanced
Client and open a local
command prompt. Enter the
following:
WINMGMT/CLEARADAP.
When the prompt returns,
enter
WINMGMT/RESYNCPERF
winmgmt service PID.
I have noticed that my Dell
OpenManage Array Manager
Log file has exceeded it's
maximum log size.
The maximum log file size has
been exceeded because the
notification message can not
be seen and cleared through
Terminal Services or
Use Dell OpenManage Array
Manager to clear the logs
periodically.
PowerVault NAS Manager.
9-4
Troubleshoot ing
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I have tried logging on to my
Dell OpenManage Remote
Assistant Card (DRAC)
through the Web console
software and I cannot log on. I
configured my DRAC using
the PowerVault Advanced
Administration Menu and I
can ping the IP address I
assigned the card. What
should I do?
There are spaces before or
after the user name or
password entries.
Reedit the configuration file
to ensure there are no spaces
before or after any of the user
and password entries.
I get a password prompt when
navigating through Local
Groups in the PowerVault
NAS Manager using Netscape
Navigator on Linux.
The password prompt is
generated by Netscape and
does not require
re-authentication. The
administrator is being asked
whether the password that was
used to access this screen
should be saved.
Select Do not Prompt Me
Again and this message will
not be displayed in the future.
When I select the Check All
box and then deselect one or
more choices on some screens
in the PowerVault NAS
Manager, the Check All box
remains selected
The Check All box does not
automatically deselect. This
does not indicate that all
items in the list are selected.
This behavior does not affect
functionality. The Check All
box does not indicate what has
specifically been selected or
deselected.
I have rebooted my NAS
appliance from a Macintosh
client, but several minutes
have passed and my NAS
appliance has not rebooted.
The most likely cause is that
the NAS appliance has come
back online but the client
screen has not refreshed.
Close Internet Explorer and
reconnect to the NAS
appliance. The NAS appliance
should behave normally.
I have changed the password
for the administrator account;
however, several minutes have
passed and I have not been
queried for the new password.
The PowerVault NAS Manager
does not automatically refresh
the account information for
the administrator while in the
PowerVault NAS Manager.
Instead, it does the refresh as a
timed function.
The password was successfully
changed. If you want to
confirm that the new
password is in affect, close the
browser and then reconnect.
The new password should
work, but the old one should
not.
Troubleshooting
9-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I have just brought my new
NAS appliance up on the
network, but I am unable to
upload files using FTP even
though I am the
By default, no user has write
privileges on the default FTP
site.
The FTP permissions must be
configured using the
Microsoft Management
Console (MMC). To get to
the MMC, click Computer
Management on the
administrator.
Advanced Administration
Menu, which is available
through Terminal Services.
See the online help for specific
information about configuring
this service.
I have deleted an FTP share
and folder from my NAS
appliance. However, when I
use Terminal Services to
By default, this folder is not
deleted by the PowerVault
NAS Manager.
Manually remove this listing
from the listed shared folders
in the FTP section of the
MMC.
confirm the removal, I can still
see the shared folder in the
FTP section of the MMC.
I cannot use the Back button
in Netscape Navigator for the
Online Help in the PowerVault
NAS Manager.
This feature is not supported.
Use the Previous Topic link to
navigate back to earlier topics.
I am using Netscape Navigator
to administer my NAS
The page has not finished
loading.
Use one of the following
resolutions:
appliance through the
• Wait for the page to finish
loading
PowerVault NAS manager. A
long gray bar at the bottom of
the screen is covering the OK
and Cancel buttons.
• Refresh the page several
times.
9-6
Troubleshoot ing
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I am looking for a topic on t he
context sensitive online help
in the PowerVault NAS
Manager, but it says No
Topic Available.
Some sections of the
PowerVault NAS Manager do
not have context sensitive
help.
For information relating to a
specific function, see the
Windows Powered Help,
which is available by clicking
Windows Powered Help on
the Advanced Administration
Menu that is available through
Terminal Services, or see the
appropriate section in this
Administrator’s Guide.
I cannot see my persistent
images.
Persistent images reside in the
ActiveArchive directory, which
is a hidden folder.
Configure your system to view
hidden files and folders.
I cannot take persistent
images of my file system.
The cache file is still being
created.
Wait until the cache file is
created and then attempt to
take the persistent image
again. To confirm that the
persistent image cache file has
been created, check the Status
Area of the ActiveArchive
section of the PowerVault NAS
Manager.
I cannot take persistent
images of my file system.
The cache file is full.
Delete one or more persistent
images until sufficient space is
free in the cache file to create
the additional persistent
images.
I cannot take a persistent
A persistent image cannot be
Taking a persistent image of
image of my C: drive.
taken of the C: drive.
the C: drive is not supported.
I notice that the date and time
for the ActiveArchive directory date and time are reset at each
changes every time I reboot
my NAS appliance.
The ActiveArchive directory
Take no action. This is the
normal functionality of Dell
ActiveArchive.
reboot. The new dates and
times do not mean that the
dates and times of your
persistent images have been
altered.
Troubleshooting
9-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I have deleted a persistent
image, but when the
Persistent Images page
redisplays I can still see the
persistent image. If I try to
delete it again, I get a blank
page.
In some environments, the
Persistent Images page in the
PowerVault NAS Manager
refreshes too quickly.
Wait a few seconds and refresh
the page. You should see that
the persistent image you
deleted is no longer listed.
I tried to clear the FTP log or
the Web (HTTP) Shares log
in the Maintenance section of
the PowerVault NAS Manager,
but I received an error
These logs are currently locked
by the NAS appliance for the
FTP service and to support
the PowerVault NAS Manager.
These logs cannot be cleared
in the PowerVault NAS
Manager.
Connect to the NAS appliance
using Terminal Services and
clear these logs using MMC.
You can access MMC by
clicking Computer
message and the log was not
cleared.
Management on the
Advanced Administration
Menu, which is available
through Terminal Services.
While viewing the properties
of a user, I selected the
General tab. The fields for
this user are now all blank.
You were already in the
General area and the page did
not refresh properly.
Select Cancel or click Back of
your browser. Next, reselect
the user for whom you wanted
to view properties.
While updating client access
to an NFS share, the option to
select No Access is displayed,
but the option to select Root
is not.
Only the All Machines
category options are displayed
during this update.
Add the appropriate clients
and select OK. After you have
added the client, navigate
back to the NFS tab for this
share and select the correct
options for the individual
Client Machines.
From a Macintosh client, I
cannot connect to the
The internally generated
certificate is not supported by
Internet Explorer for
Macintosh.
You can administer the NAS
appliance using the address
HTTP://< servername> :1278;
however, this is a nonsecure
link.
administration part of the
PowerVault NAS Manager
using the Administer This
Appliance link on the HTTP
Shares page of the PowerVault
NAS Manager.
9-8
Troubleshoot ing
Download from Www.Somanuals.com. All Manuals Search And Download.
Ta b l e 9 - 1 . Tr o u b l e s h o o t i n g I s s u e s
Issue
Possible cause
Resolut ion
I added members to a local
group using the PowerVault
NAS Manager, but when I
click the OK button, the
screen only refreshes.
You mig ht h ave rem ove d and
then added the same member
to the local group. This might
cause the screen to refresh
instead of updating correctly.
Reselect the Local Groups tab
in the PowerVault NAS
Manager menu bar. Next, add
or remove the appropriate
members to or from the local
group.
After using Terminal Services
to connect to my NAS
appliance, I am unable to type
in my native language.
The NAS appliance is set to
English, the default language
You can install your native
language character set from
the Localization CD that was
shipped with your system. For
installation instructions, see
“Advanced Features” in this
Administrator’s Guide.
Troubleshooting
9-9
Download from Www.Somanuals.com. All Manuals Search And Download.
www. d e l l . c o m | s u p p o r t . d e l l . c o m
Download from Www.Somanuals.com. All Manuals Search And Download.
I n d e x
dynamic, 3-15
A
advanced features, 7-1
array disk, 3-10
controller commands, 3-12
flush cache, 3-13
properties, 3-14
rescan, 3-13
online array disk, 3-11
properties, 3-12
extending, 3-20
rebuild, 3-10
remove, 3-12
B
backup tools
console, 3-3
ARCserveIT, 5-7
Veritas Backup Exec, 5-6
Dell OpenManage Remote
Windows 2000, 2-3
boot process, 1-2
C
disk signature, 3-14
merging foreign disks, 3-16
reactivating dynamic
disks, 3-16
Java applet, 1-6
cautions, 13
configuration, 1-3
basic, 1-3
creating files, 1-9
Kick-Start utility, 1-6
Index
1
Download from Www.Somanuals.com. All Manuals Search And Download.
reinstallation, 5-2
setup, 5-3
K
P
Kick-Start
diskette, 1-11
adding, 6-6
deleting, 6-9
L
deleting schedule, 6-7
editing schedule
properties, 6-7
local
T
scheduled, 6-4
properties
M
Macintosh
file server for, 7-16
Microsoft Directory
uninterruptible power
supply, 7-25
remote
configuration, 1-8-1-12
UPS, 7-25
N
menu, 2-3
configuration, 3-5
reconfigure, 3-7
navigation, 2-2
NetWare
shares, 2-4
changing the team mode, 7-10
team creation, 7-8, 7-9, 7-10
teaming, 7-5
agent properties, 4-5
community properties, 4-4
sound
volume
notational conventions, 13
notes, 13
disable, 3-13
enable, 3-13
checking volume
properties, 3-17
2
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
volume (continued)
creating, 3-2
deleting, 3-2, 3-18
expanding, 3-3
W
warnings, 13
warranty information, 11
formatting, 3-17
Windows 2000
backup and recovery tools, 5-6
help, 2-3
installing tape drives, 5-12
Index
3
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Index
Download from Www.Somanuals.com. All Manuals Search And Download.
|