Cradlepoint Network Router MBR1000 User Manual

QUICK START GUIDE  
RegisterÊ yourÊ MBR1000Ê  
MobileÊ BroadbandÊRouterÊ Today!  
MBR1000  
~ YOU WILL RECEIVE ~  
3G/4G  
FREE Technical Support  
New Product Information  
Mobile  
Broadband  
Router  
FREE Firmware Upgrades Special Offers & Promotions  
cradlepoint.com/register  
What’s Included In The Box  
Ethernet Cable  
Power Adapter  
3G/4G Mobile Broadband Router  
Quick Start Guide  
Wireless Setup using a Mobile Broadband  
(cellular) Data Card  
Connect Power Supply and insert ExpressCard or USB modem/s.*  
Then establish a wireless internet connection as shown below.  
Wired Connection using Cable/DSL Internet Service  
Connect power and insert one end of your Ethernet cable to the WAN port. Insert the other end of  
the Ethernet cable into your Internet service provider's modem. It may take a minute or two for the  
MBR1000 to initialize. Open your web browser. You can now access the Internet.  
USB  
Note: CradlePoint recommends that WiFi security be setup at this point.  
See the “Setting WiFi security on your CradlePoint Router” section of this guide.  
Power  
Supply  
Ethernet Cable  
Internet Service (ISP)  
Ethernet Cable  
USB  
ExpressCard  
Power  
Supply  
Modem  
*Only one Mobile Broadband Card is required to operate the MBR1000 as a wireless network in this setup.  
Mobile Broadband Card not included. See your Mobile Broadband Service Provider for details.  
Establishing a Wireless Internet Connection  
Port Panel  
I
dentify the MBR1000  
find connection starting with “MBR”  
Windows XP  
Open your computer’s WIRELESS  
NETWORK CONNECTION to associate  
with the router’s Wireless Access Point.  
This is typically completed by opening  
VIEW AVAILABLE NETWORKS  
window. After you have highlighted the  
MBR-xxx, click CONNECT.  
MBR-xxx  
WiFi On/Off  
4-LAN Ports  
WAN Port  
Windows Vista  
Open CONNECT TO A NETWORK by  
clicking the Start button, and then  
click CONNECT TO. You'll see a list  
of the wireless networks currently  
available. Click on the MBR-xxx  
network, and then click CONNECT.  
USB  
MBR-xxx  
Reset  
AC Adapter  
Mac  
Open your wireless connection list  
by clicking the AIRPORT wireless  
icon on your menu bar. Click the  
MBR-xxx.  
SGNL  
LED Status Lights  
MBR-xxx  
Signifies the MBR1000 has power.  
Signifies that the WiFi radio of the router is “On”.  
Blinking indicates traffic.  
1 4  
Signifies that a connection is made on  
respective LAN port. Blinking indicates  
traffic over the port.  
Indicates that recognizable cellular device is  
connected to the router.  
2) Connect To the Internet  
Red No Connection is being Attempted  
or Device not Recognized or Supported  
1) Using either a Windows or Mac platform, open a  
browser window. A default CradlePoint page will  
appear asking for a password.  
Signifies that connection is made on the WAN  
port. Blinking indicates traffic over the port.  
Note: The WAN port will turn on even if plugged into a computer. It is for Internet  
connections only i.e. DSL/Cable modems.  
Orange (Blinking) Modem is Dialing  
Orange (Solid) Modem is Recognized  
Green (Blinking) Modem is Negotiating  
Green (Solid) Modem is Connected  
2) The password is the last six digits of the MAC  
address shown on the box label and on the  
bottom of the router. This is a unique number  
identifying your router.  
Stands for "WiFi Protected Setup." When you  
push it, the router goes into setup mode for 90  
seconds; in which time, it looks for other WPS  
devices that are also in setup mode. When  
they find each other, they setup WPA-Personal  
Security between the 2 WiFi devices.  
4th  
This is the 4th SGNL indicator LED while  
the router is in SGNL mode. While in SGNL  
mode, WPS, WLAN, and MDM are used to  
indicate the other 3 SGNL bars.  
SGNL  
3) Once you have correctly entered your password,  
click “OK. You can now access the Internet.  
Note: CradlePoint recommends that WiFi security  
be setup at this point. See the “Setting WiFi security  
on your CradlePoint Router” section of this guide.  
Note: While in SGNL mode, you are still able to enter WPS mode, but the WPS LED  
will not be used.Also, if you enter SGNL mode while in WPS mode,WPS will continue  
normally but the WPS LED will not be used.  
SGNL  
Indicates the router is in Signal Mode.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Cornelius Refrigerator 000 PLUS User Manual
Curtis Ice Tea Maker PTT310 User Manual
Ducane HVAC Furnace CMPEV050U3 User Manual
Dynacord Speaker System VL 122 User Manual
Electro Voice Portable Speaker S 1803ER User Manual
Fellowes Paper Shredder FS5+ User Manual
Fisher Price Baby Toy 72334 User Manual
Garland Griddle E22 36 User Manual
GE Monogram Gas Grill Gas Grill User Manual
Globalsat Technology GPS Receiver BU 303 SiRF II BU 353 SiRF III User Manual