Handling Compact Discs
Storage
Use only compact discs bearing the
or
mark.
•
Do not expose compact discs to direct sunlight or any heat
source.
Do not play heart-shaped, octagonal, or other specially shaped
compact discs.
•
•
Do not expose compact discs to excess humidity or dust.
Do not expose compact discs to direct heat from heaters.
Some CDs recorded in CD-R/CD-RW mode may not be usable.
Handling
Cleaning
•
Compared to ordinary music CDs, CD-R and CD-RW discs are
both easily affected by high temperature and humidity and
some of CD-R and CD-RW discs may not be played. Therefore,
do not leave them for a long time in the car.
•
To remove fingermarks and dust, use a soft cloth and wipe in a
straight line from the center of the compact disc to the circum-
ference.
•
•
Do not use any solvents, such as commercially available
cleaners, anti-static spray, or thinner to clean compact discs.
•
New discs may have some roughness around the edges. If such
discs are used, the player may not work or the sound may skip.
Use a ball-point pen or the like to remove any roughness from
the edge of the disc.
After using special compact disc cleaner, let the compact disc
dry off well before playing it.
Ball-point pen
Roughness
•
•
Never stick labels on the surface of the compact disc or mark
the surface with a pencil or pen.
Never play a compact disc with any cellophane tape or other
glue on it or with peeling off marks. If you try to play such a
compact disc, you may not be able to get it back out of the CD
player or it may damage the CD player.
•
•
•
Do not use compact discs that have large scratches, are
misshapen, cracked, etc. Use of such discs may cause
misoperation or damage.
To remove a compact disc from its storage case, press down on
the center of the case and lift the disc out, holding it carefully by
the edges.
Do not use commercially available CD protection sheets or
discs equipped with stabilizers, etc. These may damage the disc
or cause breakdown of the internal mechanism.
Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.
Cerciórese de desplegar y de leer la página siguiente. / Assicurarsi di aprire e leggere la pagina successiva.
XMD3
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Major Button Operations when External Equipment is Connected toThis Unit
ꢀWhen the CD/MD changer is connected
ꢀ When the Sirius Satellite Radio is connected
∗ For details, see the section “CD/MD changer operations”.
∗ For details, refer to the Owner’s Manual provided with the
Sirius Satellite Radio.
[ SCN ] button
• Performs scan play for 10 seconds for each track. Disc scan play
is performed when the button is pressed and held.
[ PWR ] button
• Press the button to switch the operation mode among the
SIRIUS mode, etc.
[ RPT ] button
• Performs repeat play. When this button is pressed and held, disc
repeat play is performed.
[ s ] button
• Performs preset scan while in the SIRIUS mode.
When the button is pressed and held, auto store is performed.
[ RDM ] button
• Performs random play. Also performs disc random play when the
button is pressed and held.
[DIRECT] button
• Stores a station into memory or recall it directly while in the
SIRIUS mode.
[ DN ], [ UP ] button
• Designates the disc to be played.
[ a ], [ d ] button
• Press the button to selects a station.
[ D ] button
• When the button is pressed and held, switches the disc titles or
track titles while in the MD changer mode.
• When the button is pressed and held, switches the user titles or
track titles ,etc.while in the CD changer mode.
What is Sirius Satellite Radio?
Sirius is radio the way it was meant to be: Up to 100 new channels
of digital quality programming delivered to listeners coast to coast
via satellite. That means 50 channels of completely commercial-
free music. Plus up to 50 more channels of news, sports, and
entertainment from names like CNBC, Discovery, SCI-FI Channel,
A&E, House of Blues, E!, NPR, Speedvision and ESPN.
[ T ] button
• Use the button to input a title in the CD changer mode.
•
Use the button to scroll the title during CD-text play or MD play.
[ s ] button
• Plays or pauses a CD or MD.
Sirius is live, dynamic entertainment, completely focused on
listeners. Every minute of every day of every week will be different.
All 50 commercial-free music channels are created in-house and
hosted by DJs who know and love the music. Do you like
Reggae? How about Classic Rock or New Rock? Sirius has an
array of choices spanning a vast range of musical tastes including
the hits of the 50’s, 60’s, 70’s, & 80’s as well as Jazz, Country,
Blues, Pop, Rap, R&B, Bluegrass, Alternative, Classical, Heavy
Metal, Dance and many others...
[ BAND ] button
• Disc up and plays a first track.
[ a ], [ d ] button
• Selects a track when listening to a disc.
ꢀWhen the TV is connected
From its state-of-the-art, digital broadcasting facility in Rockefeller
Center, New York City, Sirius will deliver the broadest, deepest mix
of radio entertainment from coast to coast.
∗ For details, see the section “TV operations” .
[ P/A ] button
• Performs preset scan while in the TV mode. When the button is
pressed and held, auto store is performed.
Sirius will bring you music and entertainment programming that is
simply not available on traditional radio in any market across the
country. It’s radio like you’ve never heard before.
[ s ] button
So Get Sirius and Listen Up! For more information, visit
siriusradio.com.
• Switches the TV picture mode or VTR (external) picture mode.
[ DIRECT ] button
• Stores a station into memory or recall it directly.
[ BAND ] button
• Switches the band.
• When the button is pressed and held, switches seek tuning or
manual mode.
[ a ], [ d ] button
• Selects a station.
XMD3
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Items
Z-Enhancer Plus indication
Operation status indication
• Titles, frequency, PS names, clock, etc. are displays.
: Preset channel indication (1 to 6)
Disc number indication (1 to 6)
: SIRIUS indication
: Category indication
: Disc indication
: Scan indication
: Repeat indication
: Random indication
: Stereo indication
: Manual indication
: Enter indication
: Mute indication
: MAGNA BASS EXTEND indication
LCD Screen
In extreme cold, the screen movement may slow down and the screen may darken, but this is normal. The screen will recover when it
returns to normal temperature.
XMD3
8
Download from Www.Somanuals.com. All Manuals Search And Download.
5.WIRED REMOTE CONTROL UNIT OPERATIONS
ꢁ XMD3 following operations are enabled by remote control with the Wired Remote Control Unit MR301RC (sold separately).
WIRED REMOTE CONTROL UNIT
Display Items
Operation status indication
• Frequency, clock, etc. are displays.
Preset channel indication (1 to 6)
Disc number indication (1 to 6)
SAT
SAT
: Stereo indication
: SIRIUS indication
: Mute indication
[ w ],
[ z ]
SAT
[
], [
]
[
]
[
]
BAND
MUTE
[
]
SOURCE
Changing the disc (in changer mode)
CAUTION
Each time the [ BAND ] button is pressed, the disc switches in the
following order:
Be careful about adjusting the volume, as turning on the power
while the volume is raised to its maximum may harm your
hearing.
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
[ SOURCE ] Button
[ MUTE ] Button
Turning on and off the power
Press the [ MUTE ] button. The sound is muted immediately.
Press the [ SOURCE ] button to turn the power on and press and
hold it for 1 second or longer to turn the power off.
To cancel, press the [ MUTE ] button again.
[
], [ ] Buttons
Changing the operation mode
Selecting tracks (in changer mode or CD mode)
Each time the [ SOURCE ] button is pressed, the mode switches in
the following order:
Press the [ ] button to start playback from the beginning of the
following track. Press the [
] button to start playback from the
Radio mode ➜ SIRIUS mode ➜ CD mode ➜ CD changer mode
➜ MD changer mode ➜ TV mode ➜ AUX mode ➜ Radio
mode.....
beginning of the current track. If pressed again, the track moves to
the previous one.
Fast-forward and fast-backward (in changer mode or CD mode)
Notes:
Press and hold the [ ] button to fast-forward the disc. Press and
• If the above equipment is not connected, corresponding mode
cannot be selected.
hold the [
] button to fast-backward the disc.
∗ Pressing and holding the [ ] or [
] buttons for 1 second or longer
• In CD mode, if no CD is loaded in XMD3, “DISC” flashes on the
Display and the radio mode is selected.
will move forward or backward 3 times faster than normal play, and
pressing and holding it for 3 seconds or longer will do the operation
30 times faster.
[ w ], [ z ] Buttons
Adjusting the volume
Changing preset stations (in Radio mode)
Press the [ w ] button to increase the volume and press the [ z ]
Each time the [ ] or [
] buttons are pressed, the preset station
button to decrease the volume.
switches in the following order:
1 ➜ 2 ➜ 3 ➜ 4 ➜ 5 ➜ 6 ➜ 1.....
or
[BAND] Button
Changing the band (in Radio mode)
Each time the [ BAND ] button is pressed, the band switches in the
following order:
6➜ 5 ➜ 4 ➜ 3 ➜ 2 ➜ 1 ➜ 6.....
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1.....
Top function (in CD mode)
Press the [ BAND ] button, then the CD will start from the first
song (track number 1).
XMD3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
6.OPERATIONS
Basic Operations
Note: Be sure to read this chapter referring to the front diagrams of chapter
“2. CONTROLS” on page 3 (unfold).
Main display
CAUTION
When this unit is turned on, starting and stopping the engine
of a boat with its volume raised to the maximum level may
harm your hearing.
Sub (title) display
Clock display
Main display
Be careful about adjusting the volume.
IMPORTANT
Door must be totally closed to prevent water go into the set!
∗ Once selected, the preferred display becomes the display default.
When a function adjustment such as volume is made, the screen
will momentarily switch to that function’s display, then revert back
to the preferred display several seconds after the adjustment.
OK
NG
∗
When you have entered a title in a CD, it appears in the sub display. If
you have not entered a title, “NO TITLE” appears in the title display
instead. For information on how to enter a title, refer to the subsection
“Entering titles” in section “Operations Common to Each Mode ”.
Turning on/off the power
1. Press the [ PWR ] button.
2. The illumination and display on the unit light up. The unit
automatically remembers its last operation mode and will
automatically switch to display that mode.
Setting the Z-Enhancer Plus
This unit are provided with 3 types of sound tone effects stored in
memory. Select the one you prefer.
∗ The factory default setting is “Z+ OFF”.
Each time you press the [ Z+ ] button, the tone effect changes in
3. Press and hold the [ PWR ] button for 1 second or longer to turn
off the power for the unit.
Note:
• System check
the following order:
The first time this unit is turned on after the wire connections are
completed, it must check what equipment is connected. When
the power is turned on, “SYSTEM” and “PUSH PWR” appear in
the display alternately, so press the [ PWR ] button. The system
check starts within the unit. When the system check is complete,
the power is turned off, so press the [ PWR ] button again.
“Z+ OFF” ➜ “B-BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜ “CUS-
TOM” ➜ “Z+ OFF” ...
• B-BOOST : bass emphasized
• IMPACT : bass and treble emphasized
• EXCITE : bass and treble emphasized mid de-emphasized
• CUSTOM : user custom
Selecting a mode
• Z+ OFF
: no sound effect
1. Press the [ PWR ] button to change the operation mode.
2. Each time you press the [ PWR ] button, the operation mode
Adjusting the tone
changes in the following order:
Press the [ A-M ] button and select the item to adjust. Each time you
press the [ A-M ] button, the item changes in the following order:
Radio mode ➜ SIRIUS mode ➜ CD mode ➜ CD changer mode
➜ MD changer mode ➜ TV tuner ➜ AUX mode ➜ Radio mode...
∗ External equipment not connected with CeNET is not displayed.
ꢀ When “B-BOOST” is set
“S-VOL 0” ➜ “B-BOOST” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func-
tion mode.
Adjusting the volume
Press the [ w ] or [ z ] button increases or decreases the
volume.
ꢀ When “IMPACT” is set
“S-VOL 0” ➜ “IMPACT” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func-
tion mode.
∗ The volume level is from 0 (minimum) to 33 (maximum).
ꢀ When “EXCITE” is set
“S-VOL 0” ➜ “EXCITE” ➜ “BAL 0” ➜ “FAD 0” ➜ Last func-
tion mode.
Switching the Display
Press the [ D ] button to select the desired display.
ꢀ When “CUSTOM” is set
Each time you press the [ D ] button, the display switches in the
following order:
“S-VOL 0” ➜ “BASS” ➜ “TREBLE” ➜ “BAL 0” ➜ “FAD 0” ➜
Last function mode.
ꢀ When “Z+ OFF” is set
“S-VOL 0” ➜ “BAL 0” ➜ “FAD 0” ➜ Last function mode.
∗ If sub-woofer is effective, “S-VOL 0” can be selected.
XMD3
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Adjusting the subwoofer
Adjusting the fader
When you default select one of mode (LPF50, LPF80, LPF120)
∗ The factory default setting is “S-VOL 0”. (Adjustment range: -6 to +6)
1. Press the [ A-M ] button and select “S-VOL 0”.
1. Press the [ A-M ] button and select “FAD 0”.
2. Press the [ w ] button emphasizes the sound from the front
speaker, press the [ z ] button emphasizes the sound from the
rear speaker.
2. Press the [ w ] or [ z ] button increases or deceases the
subwoofer volume.
∗ The factory default setting is “FAD 0”. (Adjustment range: F12 to
R12)
Press and hold the [ w ] or [ z ] button automatically in-
3. When the adjustment is complete, press the [ A-M ] button
creases or deceases the subwoofer volume.
several times until the function mode is reached.
3. When the adjustment is complete, press the [ A-M ] button
several times until the function mode is reached.
Adjusting the Z-Enhancer Plus
1. Press the [ Z+ ] button and select the Z-Enhancer Plus mode to
adjust.
Adjusting the bass (Gain, Frequency, Q-curve)
This adjustment can be performed when the Z-Enhancer Plus is
set to “CUSTOM”.
2. Press the [ A-M ] button and press the [ w ] button adjusts in
the + direction; press the [ z ] button adjusts in the - direction.
1. Press the [ A-M ] button and select “BASS”.
ꢀ When “B-BST 0” is selected, you can adjust the bass in the
range of -3 to 3.
2. Press the [ w ] button emphasizes the bass.
Press the [ z ] button attenuates the bass.
∗ The factory default setting is “B<G 0>”. (Adjustment range: –6 to
ꢀ When “IMPACT 0” is selected, you can adjust the bass and
treble in the range of -3 to 3.
+6)
3. Press the [ d ] or [ a ] button to select “B<F 60>”.
Press the [ w ] or [ z ] button to select the frequency.
ꢀ When “EXCITE 0” is selected, you can adjust the bass and
treble in the range of -3 to 3.
∗ Press and hold the [ Z+ ] button for 2 seconds or longer to change
to the “CUSTOM” mode.
Bass/treble characteristics become flat and the indication
“Z+FLAT” is shown in the display.
∗ The factory default setting is “B<F 60>”.(Adjustment 60/100/200
Hz)
4. Press the [ d ] or [ a ] button to select “B<Q 1>”.
Press the [ w ] or [ z ] button to select the Q-curve.
∗ The factory default setting is “B<Q 1>”.(Adjustment 1/1.25/1.5/2)
Press the [ Z+ ] button again to change to the “Z+ OFF” mode.
5. When the adjustment is complete, press the [ A-M ] button
Turning on/off MAGNA BASS EXTEND
The MAGNA BASS EXTEND does not adjust the low sound area
like the normal sound adjustment function, but emphasizes the
deep bass sound area to provide you with a dynamic sound.
several times until the function mode is reached.
Adjusting the treble (Gain, Frequency)
This adjustment can be performed when the Z-Enhancer Plus is
set to “CUSTOM”.
∗ The factory default setting is off.
1. Press and hold the [ A-M ] button for 1 second or longer to turn
on the MAGNA BASS EXTEND effect. “M-B EX” lights in the
display.
1. Press the [ A-M ] button and select “TREBLE”.
2. Press the [ w ] button emphasizes the treble.
Press the [ z ] button attenuates the treble.
2. Press and hold the [ A-M ] button for 1 second or longer to turn
off the MAGNA BASS EXTEND effect. “M-B EX” goes off from
the display.
∗ The factory default setting is “T<G 0>”. (Adjustment range: –6 to
+6)
3. Press the [ d ] or [ a ] button to select “T<F 10>”.
Press the [ w ] or [ z ] button to select the frequency.
∗ The factory default setting is “T<F 10>”.(Adjustment 10 kHz/15
kHz)
4. When the adjustment is complete, press the [ A-M ] button
several times until the function mode is reached.
Adjusting the balance
1. Press the [ A-M ] button and select “BAL 0”.
2. Press the [ w ] button emphasizes the sound from the right
speaker, press the [ z ] button emphasizes the sound from the
left speaker.
∗ The factory default setting is “BAL 0”. (Adjustment range: L13 to
R13)
3. When the adjustment is complete, press the [ A-M ] button
several times until the function mode is reached.
XMD3
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations
FM reception
Seek tuning
For enhanced FM performance the
® tuner includes signal
1. Press the [ BAND ] button and select the desired band (FM or AM).
actuated stereo control, Enhanced Multi AGC, Impulse noise reduction
curcuits and Multipath noise reduction circuits.
∗ If “MANU” is lit in the display, press and hold the [ BAND ] button
for 1 second or longer. “MANU” in the display goes off and seek
tuning is now available.
Changing the reception area
2. Press the [ a ] or [ d ] button to automatically seek a station.
When the [ d ] button is pressed, the station is sought in the
direction of higher frequencies; if the [ a ] button is pressed,
the station is sought in the direction of lower frequencies.
This unit is initially set to USA frequency intervals of 10kHz for AM and
200kHz for FM. When using it outside the USA, the frequency reception
range can be switched to the intervals below.
U.S. standard
Europe
Other
(Initial setting) standard
countries
Manual tuning
Frequency
AM spacing
There are 2 ways available: Quick tuning and step tuning.
10 kHz
530 to
9 kHz
531 to
9 kHz
When you are in the step tuning mode, the frequency changes one
step at a time. In the quick tuning mode, you can quickly tune the
desired frequency.
Frequency
range
531 to
1,629 kHz
1,710 kHz
1,602 kHz
Frequency
FM spacing
Seek:100 kHz
Manual:50kHz
200 kHz
50 kHz
1. Press the [BAND] button and select the desired band (FM or AM).
∗ If “MANU” is not lit in the display, press and hold the [BAND]
button for 1 second or longer. “MANU” is lit in the display and
manual tuning is now available.
Frequency
range
87.9 to
107.9 MHz
87.5 to
108 MHz
87.0 to
108 MHz
Setting the reception area
∗ Any station preset memories are lost when the reception area is
changed.
2. Tune in a station.
ꢀ Quick tuning:
Press and hold the [ a ] or [ d ] button for 1 second or longer
1. Press the [ BAND ] button and select the desired radio band
to tune in a station.
(FM or AM).
ꢀ Step tuning:
Press the [ a ] or [ d ] button to manually tune in a station.
• U.S. standard (initial setting)
2-1. While pressing the [ A-M ] button, press and hold the
number “1” of the [ DIRECT ] buttons for 2 seconds or
longer.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-FM3, 6-AM) exist
to store individual radio stations in memory. Pressing the corre-
sponding [ DIRECT ] button recalls the stored radio frequency
automatically.
• Europe standard (new setting)
2-1. While pressing the [ A-M ] button, press and hold the
number “3” of the [ DIRECT ] buttons for 2 seconds or
longer.
1. Press the [ BAND ] button and select the desired band (FM or AM).
• Other countries (new setting)
2. Press the corresponding [ DIRECT ] button to recall the stored
2-1. While pressing the [ A-M ] button, press and hold the
number “2” of the [ DIRECT ] buttons for 2 seconds or
longer.
station.
∗ Press and hold one of the [ DIRECT ] buttons for 2 seconds or
longer to store that station into preset memory.
Listening to the radio
Manual memory
1. Press the [ PWR ] button and select the radio mode. The
frequency or PS appears in the display.
1. Select the desired station with seek tuning, manual tuning or
preset tuning.
∗ PS: Programme service name
2. Press and hold one of the [ DIRECT ] buttons for 2 seconds or
2. Press the [ BAND ] button and select the radio band. Each time
the button is pressed, the radio reception band changes in the
following order:
longer to store the current station into preset memory.
FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...
Auto store
3. Press the [ a ] or [ d ] button to tune in the desired station.
Auto store is a function for storing up to 6 stations that are auto-
matically tuned in sequentially. If 6 receivable stations cannot be
received, a previously stored station remains unoverwritten at the
memory position.
Mute
Use this function to turn off the sound immediately.
1. Press the [ M ] button.
1. Press the [ BAND ] button and select the desired band (FM or AM).
2. Press and hold the [ P/A ] button for 2 seconds or longer. The
stations with good reception are stored automatically to the
preset channels.
The sound turns off and “MUTE” appears in the display.
2. Press the [ M ] button again to cancel the mute mode.
∗ If auto store is performed in the FM bands, the stations are stored
in FM3 even if FM1 or FM2 was chosen for storing stations.
Tuning
There are 3 types of tuning mode available, seek tuning, manual
tuning and preset tuning.
XMD3
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio Operations CD Operations
Preset scan
Loading a CD
Preset scan receives the stations stored in preset memory in order.
This function is useful when searching for a desired station in
memory.
1. Open the door by push up the [ HOOK ].
2. Insert a CD into the centre of the [ CD SLOT ] with the label
side facing up, and completely close the [ DOOR ].
The CD plays automatically after loading.
1. Press the [ P/A ] button.
2. When a desired station is tuned in, press the [ P/A ] button
For 5-inch (12 cm) CD
For 3-inch (8 cm) single CD
again to continue receiving that station.
Note:
• Be careful not to press and hold the [ P/A ] button for 2 seconds
or longer, otherwise the auto store function is engaged and the
unit starts storing stations.
Instant station recall (ISR)
Instant station recall is a special radio preset that instantly ac-
cesses a favorite radio station at a touch of a button. The ISR
function even operates with the unit in other modes.
Notes:
• Never insert foreign objects into the CD SLOT.
• If the CD is not inserted easily, there may be another CD in the
mechanism or the unit may require service.
ꢀ ISR memory
1. Select the station that you wish to store in ISR memory.
2. Press and hold the [ ISR ] button for 2 seconds or longer.
• Discs not bearing the
or
mark and CD-ROMs cannot
ꢀ Recalling a station with ISR
In any mode, press the [ ISR ] button to turn on the radio function
and tune the selected radio station. “ISR” appears in the display.
Press the [ISR] button again to return to the previous mode.
be played by this unit.
• Some CDs recorded in CD-R/CD-RW mode may not be usable.
Loading 8 cm compact discs
∗ No adapter is required to play an 8 cm CD.
∗ Insert the 8 cm CD into the centre of the insertion slot.
Listening to a CD already inserted
Press the [ PWR ] button to select the CD mode. Play starts automati-
cally. If no CD is loaded in the unit, “NO DISC” appears in the display.
Pausing play
1. Press the [ s ] button to pause play. “PAUSE” appears in the
display.
2. To resume CD play, press the [ s ] button again.
Displaying CD titles
This unit can display title data for CD-text CDs and user titles input
with this unit.
1. Press the [ D ] button to display the title.
2. Each time you press and hold the [ D ] button for 1 second or
longer, the title display changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist name ➜ CD-text
title (track) ➜ User title (disc)...
Note:
• If the CD playing is not a CD-text CD or no user title has been
input, “NO TITLE” appears in the display.
Ejecting a CD
1. Open the door by push up the [ HOOK ].
2. Press the [ Q ] to eject the CD. Take it out from the ejected
position.
Notes:
• If a CD (12 cm) is left in the ejected position for 15 seconds, the
CD is automatically reloaded (Auto reload).
•
•
8 cm CDs are not auto reloaded. Be sure to remove it when ejected.
If you force a CD into before auto reloading, this can damage the CD.
XMD3
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CD Operations
Operations Common to Each Mode
Selecting a track
Entering titles
Titles up to 8 characters long can be stored in memory and
displayed for CD, CD changer and TV stations. The number of titles
that can be entered for each mode are as follows.
ꢀ Track-up
1. Press the [ d ] button to move ahead to the beginning of the
next track.
Mode
Number of titles
50 titles
2. Each time you press the [ d ] button, the track advances
ahead to the beginning of the next track.
CD mode
TV mode
20 titles
ꢀ Track-down
1. Press the [ a ] button to move back to the beginning of the
CD changer mode
CDC625 connected
CDC655Tz connected
CDC1255z connected
Number of titles
100 titles
current track.
2. Press the [ a ] button twice to move to the beginning of the
previous track.
100 titles
50 titles
Fast-forward/fast-backward
ꢀ Fast-forward
1. Press the [ PWR ] button to select the mode you want to enter a
title (CD, CD changer or TV).
Press and hold the [ d ] button for 1 second or longer.
ꢀ Fast-backward
2. Select and play a CD in the CD changer or tune in to a TV
station for which you want to enter the title.
Press and hold the [ a ] button for 1 second or longer.
3. Press the [ D ] button and display the sub.
4. Press the [ T ] button. The cursor position flashes.
5. Press the [ a ] or [ d ] button to move the cursor.
6. Press the [ D ] button to select a character. Each time you press
the [ D ] button, the character changes in the following order:
Top function
The top function resets the CD player to the first track of the disc.
Press the [ BAND ] button to play the first track (track No. 1) on the
disc.
Numbers ➜ Symbols ➜ Capital letters ➜ Numbers...
7. Press the [ w ] or [ z ] button to select the desired character.
Scan play
Press the [ a ] button moves the cursor to the next character;
Press the [ d ] button moves the cursor to the previous
character.
The scan play locates and plays the first 10 seconds of each track
on a disc automatically. This function continues on the disc until it
is cancelled.
8. Repeat steps 5 to 7 to enter up to 8 characters for the title.
∗ The scan play is useful when you want to select a desired track.
1. Press the [ SCN ] button to start scan play. “SCN” lights in the
9. Press and hold the [ s ] button for 2 seconds or longer to
store the title into memory and cancel title input mode.
display.
2. To cancel the scan play, press the [ SCN ] button again. “SCN”
Clearing titles
goes off from the display and the current track continues to play.
1. Select and play a CD in the CD changer or tune in to a TV
station for which you want to clear the title.
Repeat play
2. Press the [ D ] button and display the sub.
The repeat play continuously plays the current track. This function
continues automatically until it is cancelled.
3. Press the [ T ] button. Titles appears in the display and the
display switches to the title input display.
1. Press the [ RPT ] button. “RPT” lights in the display and the
4. Press the [ BAND ] button.
current track is repeated.
5. Press and hold the [ s ] button for 2 seconds or longer to
2. To cancel the repeat play, press the [ RPT ] button again. “RPT”
clear the title and cancel title input mode.
goes off from the display and normal play resumes.
Setting the low pass filter
This function allows you to set the low-pass filter for sub-woofer
output.
∗ The factory default setting is “LPF 120”.
1. Press and hold the [ T ] button for 1 second or longer to switch
Random play
The random play selects and plays individual tracks on a disc in no
particular order. This function continues automatically until it is
cancelled.
1. Press the [ RDM ] button. “RDM” lights in the display, an
to the adjustment selection display.
individual track is selected randomly and play begins.
2. Press the [ a ] or [ d ] button and select “SW LPF”.
2. To cancel the random play, press the [ RDM ] button again.
“RDM” goes off from the display and normal play resumes.
3. Press the [ w ] or [ z ] button to setting changes as following
order:
“LPF 120”
“LPF 80”
“LPF 50”
“REAR”
4. Press the [ T ] button to return to the previous mode.
XMD3
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations Common to Each Mode
6. Press the [ s ] button to store the time into memory.
7. Press the [ T ] button to return to the previous mode.
Dimmer control
You can setting the dimmer control on or off.
∗ The factory default setting is “ON”.
Note:
1. Press and hold the [ T ] button for 1 second or longer to switch
• You cannot set the clock when it is displayed with only the
ignition on. If you drain or remove the car’s battery or take out
this unit, the clock is reset. While setting the clock, if another
button or operation is selected, the clock set mode is canceled.
to the adjustment selection display.
2. Press the [ a ] or [ d ] button to select “DIMMER”.
3. Press the [ w ] or [ z ] button to select “ON” or “OFF”.
4. Press the [ T ] button to return to the previous mode.
Turning the screen saver function on or off
This unit is provided with the screen saver function.You can turn
on or off this function.
Adjusting the display contrast
You can adjust the display contrast to match the angle of
instalation of the unit.
∗ The factory default setting is “5”.(Adjustment level 1 to 8)
1. Press and hold the [ T ] button for 1 second or longer to switch
If the button operation is performed with the screen saver function
on, the operation display corresponding to the button operation is
shown for about 30 seconds and the display returns to the screen
saver display.
to the adjustment selection display.
∗ The factory default setting is “SS”.
2. Press the [ a ] or [ d ] button and select “CONTRAST”.
3. Press the [ w ] or [ z ] button to adjust the contrast.
4. Press the [ T ] button to return to the previous mode.
1. Press and hold the [ T ] button for 1 second or longer to switch
to the adjustment selection display.
2. Press the [ a ] or [ d ] button and select “SCRN SVR”.
3. Press the [ s ] button.
Setting the method for title scroll
Set how to scroll in CD-TEXT or MD.
4. Press the [ w ] or [ z ] button to setting changes as following
order:
∗ The factory default setting is “ON”.
“MESSAGE”
“SS”(screen saver)
“OFF (off)”
1. Press and hold the [ T ] button for 1 second or longer to switch
5. Press the [ s ] button to store the setting.
6. Press the [ T ] button to return to the previous mode.
to the adjustment selection display.
2. Press the [ a ] or [ d ] button and select “SCROLL”.
3. Press the [ w ] or [ z ] button to select “ON” or “OFF”.
∗ The following illustration presents one of the patterns which are
shown when the screen saver function is turned on.
ꢀ ON
: To scroll automatically.
ꢀ OFF : To scroll just 1 time when the title was changed or
the title key was pressed.
4. Press the [ T ] button to return to the previous mode.
Entering message information
Message up to 30 characters long can stored in memory and
display for any mode.
AUX function
This system has an external RCA input so you can listen to
sounds and music from external devices connected to this unit.
Any of the messages input can be displayed as one of the patterns
for the screen saver function.
∗ The factory default setting is “WELCOME TO CLARION”.
1. Press and hold the [ T ] button for 1 second or longer to switch
Selecting AUX IN sensitivity
to the adjustment selection display.
Make the following settings to select the sensitivity when sounds
from external devices connected to this unit are difficult to hear
even after adjusting the volume.
2. Press the [ a ] or [ d ] button and select “INPUT”.
3. Press the [ s ] button.
4. Press the [ a ] or [ d ] button to move the cursor.
5. Press the [ D ] button to select a character. Each time you press
the [ D ] button, the character changes in the following order:
∗ The factory default setting is “MID”.
1. Press and hold the [ T ] button for 1 second or longer to switch
to the adjustment selection display.
2. Press the [ a ] or [ d ] button and select “AUX SENS”.
Numbers ➜ Symbols ➜ Capital letters ➜ Numbers...
3. Press the [ w ] or [ z ] button needed and select from “HIGH
6. Press the [ w ] or [ z ] button to select the desired character.
Press the [ d ] button moves the cursor to the next character;
Pressing the [ a ] button moves the cursor to the previous
character.
(high)”, “MID (middle)” or “LOW (low)”.
4. Press the [ T ] button to return to the previous mode.
7. Repeat steps 4 to 6 to enter up to 30 characters for the mes-
sage.
Setting the clock
1. Press and hold the [ T ] button for 1 second or longer to switch
to the adjustment selection display.
8. Press and hold the [ s ] button for 2 seconds or longer to
store the message into memory and cancel message input
mode.
2. Press the [ a ] or [ d ] button to select “CLOCK”.
3. Press the [ s ] button.
4. Press the [ a ] or [ d ] button to select the hour or the minute.
5. Press the [ w ] or [ z ] button to set the correct time.
∗ The clock is displayed in 12-hour format.
9. Press the [ T ] button to return to the previous mode.
XMD3
15
Download from Www.Somanuals.com. All Manuals Search And Download.
7.OPERATIONS OF ACCESSORIES
CD/MD Changer Operations
CD/MD changer functions
Procedure to scroll a title
When an optional CD/MD changer is connected through the
CeNET cable, this unit controls all CD/MD changer functions. This
unit can control a total of 2 changers (MD and/or CD).
Set “SCROLL” to “ON” or “OFF”.
(The factory default setting is “ON”. Refer to the subsection
“Setting the method for Title scroll” in section “Operation
common to each mode”.)
Press the [ PWR ] button and select the CD(MD) changer mode to
start play. If 2 CD(MD) changers are connected, press the [ PWR ]
button to select the CD(MD) changer for play.
∗ If “NO MAG” appears in the display, insert the magazine into the CD
changer. “DISC CHK” appears in the display while the player loads
(checks) the magazine.
ꢀ When set to “ON”
The title is automatically kept scrolling.
ꢀ When set to “OFF”
To scroll just 1 time when the title was changed or the [ T ]
button was pressed.
∗ If “NO DISC” appears in the display, eject the magazine and insert
discs into each slot. Then, reinsert the magazine back into the CD
changer.
Selecting a CD or MD
∗ If “NO DISC” appears in the display, load MDs into the MD changer.
1. Press the [ UP ] or [ DN ] button to select the desired disc.
∗ If a CD is not loaded in a slot of magazine, pressing the [ UP ]
or [ DN ] button can not work.
CAUTION
CD-ROM discs cannot be played in the CD changer.
∗ If an MD is not loaded in a slot of MD changer, pressing the [
UP ] or [ DN ] button can not work.
Pausing play
Selecting a track
ꢀ Track-up
1. Press the [ s ] button to pause play. “PAUSE” appears in the
display.
1. Press the [ d ] button to move ahead to the beginning of the
2. To resume play, press the [ s ] button again.
next track.
2. Each time you press the [ d ] button, the track advances
Displaying CD titles
ahead to the beginning of the next track.
This unit can display title data for CD-text CDs and user titles input
with this unit.
ꢀ Track-down
1. Press the [ a ] button to move back to the beginning of the
∗ Title data for CD-text CDs can be displayed with this unit only when it
is connected to CDC655Tz.
current track.
2. Press the [ a ] button twice to move to the beginning of the
ꢀ When connected to DCZ625 or CDC1255z
1. Press the [ D ] button to display the title.
previous track.
ꢀ When connected to CDC655Tz
1. Press the [ D ] button to display the title.
Fast-forward/fast-backward
ꢀ Fast-forward
2. Each time you press and hold the [ D ] button for 1 second or
Press and hold the [ d ] button for 1 second or longer.
longer, the title display changes in the following order:
User title (disc) ➜ CD-text title (disc) ➜ Artist name ➜ CD-text
title (track) ➜ User title (disc)...
ꢀ Fast-backward
Press and hold the [ a ] button for 1 second or longer.
Notes:
• If the CD playing is not a CD-text CD or no user title has been
input, “NO TITLE” appears in the display.
• If a CD-text CD is not input its disc title or a track title, “NO
TITLE” appears in the display.
Scan play
Scan play locates and plays the first 10 seconds of each track on a
disc automatically. This function continues on the disc until it is
cancelled.
∗ The scan play is useful when you want to select a desired track.
1. Press the [ SCN ] button to start track scanning. “SCN” lights in
Switching disc titles and track titles(MD)
This unit can display disc titles and track titles already entered on
MDs.
∗ Titles cannot be entered for MDs with this unit.
1. Press the [ D ] button to display the title. The disc title or track
the display.
2. To cancel the scan play, press the [ SCN ] button again. “SCN”
goes off from the display and the current track continues to play.
title is displayed.
Disc scan play
2. Each time you press and hold the [ D ] button for 1 second or
longer, the display toggles between the disc title and the track
title.
Disc scan play locates and plays the first 10 seconds of the first
track on each disc in the currently selected CD (MD) changer. This
function continues automatically until it is cancelled.
Note:
∗ Disc scan play is useful when you want to select a desired CD (MD).
1. Press and hold the [ SCN ] button for 1 second or longer. “DISC”
and “SCN” light in the display and disc scan play starts.
• If an MD is not input its disc title or a track title, “NOTITLE”
appears in the display.
XMD3
16
Download from Www.Somanuals.com. All Manuals Search And Download.
CD/MD Changer Operations TV Operations
2. To cancel disc scan play, press the [ SCN ] button again. “DISC”
TV tuner functions
and “SCN” go off from the display and the current track contin-
ues to play.
When an optional TV tuner is connected through the CeNET cable,
this unit controls all TV tuner functions. To watch TV requires a TV
tuner and monitor.
Repeat play
Repeat play continuously plays the current track. This function
continues automatically until it is cancelled.
Watching a TV
1. Press the [ PWR ] button and select the TV mode.
1. Press the [ RPT ] button. “RPT” lights in the display and the
2. Press the [ BAND ] button to select the desired TV band (TV1
or TV2). Each time the button is pressed, the input selection
toggles between TV1 and TV2.
current track is repeated.
2. To cancel repeat play, press the [ RPT ] button again. “RPT”
goes off from the display and normal play resumes.
3. Press the [ a ] or [ d ] button to tune in the desired TV station.
Disc repeat play
Watching a video
After all the tracks on the current disc have been played, disc
repeat play automatically replays the current disc over from the
first track. This function continues automatically until it is cancelled.
The TV tuner has a VTR input terminal to which 1 external device
can be connected. Connect a 12 V video cassette player (VCP) or
video cassette recorder (VCR) to the TV tuner input terminal.
1. Press and hold the [ RPT ] button for 1 second or longer. “DISC”
and “RPT” light in the display and disc repeat play starts.
1. Press the [ s ] button to select VTR.
2. To return to the TV broadcast, press the [ s ] button.
2. To cancel disc repeat play, press and hold the [ RPT ] button
again. “DISC” and “RPT” go off from the display and normal play
resumes on the current track.
Tuning
There are 3 types of tuning mode available, Seek tuning, manual
tuning and preset tuning.
Random play
Random play selects and plays individual tracks on the disc in no
particular order. This function continues automatically until it is
cancelled.
Seek tuning
1. Press the [ BAND ] button and select the desired TV band (TV1
or TV2).
1. Press the [ RDM ] button. “RDM” lights in the display and
∗ If “MANU” is lit in the display, press and hold the [ BAND ] button
for 1 second or longer. “MANU” in the display goes off and seek
tuning is now available.
random play begins.
2. To cancel random play, press the [ RDM ] button again. “RDM”
goes off from the display and normal play resumes.
2. Press the [ a ] or [ d ] button to automatically seek a station.
Press the [ d ] button to automatically tune up the frequency
band to the next available TV station; press the [ a ] button to
automatically tune down.
Disc random play
The disc random play selects and plays individual tracks or discs
automatically in no particular order. This function continues
automatically until it is cancelled.
Manual tuning
1. Press and hold the [ RDM ] button for 1 second or longer.
“DISC” and “RDM” light in the display and disc random play
starts.
There are 2 ways available: Quick tuning and step tuning.
When you are in the step tuning mode, the frequency changes one
step at a time. In the quick tuning mode, you can quickly tune the
desired frequency.
2. To cancel disc random play, press and hold the [ RDM ] button
again. “DISC” and “RDM” go off from the display and normal
play resumes from the current track.
1. Press the [ BAND ] button and select the desired band (TV1 or TV2).
∗ If “MANU” is not lit in the display, press and hold the [ BAND ]
button for 1 second or longer. “MANU” lights in the display and
manual tuning is now available.
2. Tune in a station.
ꢀ Quick tuning:
Press and hold the [ a ] or [ d ] button for 1 second or longer
to tune in a station.
ꢀ Step tuning:
Press the [ a ] or [ d ] button to manually tune in a station.
XMD3
17
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Operations
Recalling a preset station
Setting the TV diver
A total of 12 TV stations can be stored (6-TV1 and 6-TV2). This
allows you to select your favorite TV stations and store them in
memory for later recall.
You can change the reception setting for the TV antenna con-
nected to the TV tuner.
1. Press and hold the [ T ] button for 1 second or longer to switch
1. Press the [ BAND ] button and select the desired TV band (TV1 or TV2).
to the adjustment selection display.
2. To recall a stored TV station, press the desired [ DIRECT ]
2. Press the [ a ] or [ d ] button to select “TV DIVER”.
button to select that station.
∗ Press and hold one of the [ DIRECT ] buttons for 2 seconds or
longer to store the current station into preset memory.
3. Press the [ w ] button to set to “DIVR ON” or press the [ z ]
button to set to “DIVR OFF”.
ꢀ DIVR ON : Sets reception emphasizing the visual.
ꢀ DIVR OFF : Sets the diver setting to OFF.
Manual memory
4. Press the [ T ] button to return to the previous mode.
1. Select the desired station with seek tuning, manual tuning or
preset tuning.
2. Press and hold one of [ DIRECT ] buttons for 2 seconds or
longer to store the current station into preset memory.
Auto store
Auto store selects 6 TV stations automatically and stores each one
into preset memory.
If there are not 6 stations with good reception, stations previously
stored in memory remain and only the strong stations are stored
into memory.
1. Press the [ BAND ] button and select the desired TV band (TV1
or TV2).
2. Press and hold the [ P/A ] button for 2 seconds or longer. The
stations with good reception are stored automatically to the
preset channels.
Preset scan
Preset scan allows the user to view each preset position before it
automatically advances to the next preset. This function is useful
for searching for a desired TV station in memory.
1. Press the [ P/A ] button.
2. When the desired station is found, press the [P/A] button again
to remain tuned to that station.
Note:
• Do not press and hold the [ P/A ] button for 2 seconds or longer.
Doing so will trigger the auto store function and start storing
stations into memory.
Setting the TV area
When you select the TV area (TV reception area), the TV tuner
area setting changes.
1. Press and hold the [ T ] button for 1 second or longer to switch
to the adjustment selection display.
2. Press the [ a ] or [ d ] button to select “TV AREA”.
3. Press the [ s ] button.
4. Press the [ w ] or [ z ] button to select the reception area.
5. Press the [ s ] button.
6. Press the [ T ] button to return to the previous mode.
XMD3
18
Download from Www.Somanuals.com. All Manuals Search And Download.
8.IN CASE OF DIFFICULTY
Problem
Cause
Solution
Power does not turn on. (No sound is pro-
duced.)
Fuse is blown.
Replace with a fuse of the same amperage. If
the fuse blows again, consult your store of pur-
chase.
Incorrect wiring.
Consult your store of purchase.
Compact disc cannot be loaded.
Sound skips or is noisy.
Another compact disc is already loaded.
Compact disc is dirty.
Eject the compact disc before loading the new
one.
Clean the compact disc with a soft cloth.
Compact disc is heavily scratched or Replace with a compact disc with no scratches.
warped.
Sound is bad directly after power is turned
on.
Water droplets may form on the internal lens Let dry for about 1 hour with the power on.
when the car is parked in a humid place.
Nothing happens when buttons are
pressed. display is not accurate.
Microprocessor has malfunctioned due to Turn off the power, then open the [ DOOR ] by up
noise, etc.
the [ HOOK ] .
Press the reset button for about 2 seconds with
a thin rod.
Reset Button
XMD3
19
Download from Www.Somanuals.com. All Manuals Search And Download.
9.ERROR DISPLAYS
If an error occurs, one of the following displays is displayed.
Take the measures described below to eliminate the problem.
Error Display
ERROR 2
Cause
Measure
A CD is caught inside the CD deck and is not ejected.
This is a failure of CD deck’s mechanism and consult
your store of purchase.
ERROR 3
ERROR 6
A CD cannot be played due to scratches, etc.
Replace with a non-scratched, non-warped-disc.
Eject the disc then reload it properly.
A CD is loaded upside-down inside the CD deck and
does not play.
ERROR 2
ERROR 3
ERROR 6
ERROR H
ERROR 2
ERROR 3
ERROR 6
A CD inside the CD changer is not loaded.
This is a failure of CD changer’s mechanism and consult
your store of purchase.
A CD inside the CD changer cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped disc.
A CD inside the CD changer cannot be played because it Eject the disc then reload it properly.
is loaded upside-down.
Displayed when the temperature in the MD changer is
too high and playback has been stopped automatically.
Lower the surrounding temperature and wait for a while
to cool off MD changer.
An MD inside the MD changer is not loaded.
This is a failure of MD changer’s mechanism and consult
your store of purchase.
An MD inside the MD changer cannot be played due to
scratches, etc.
Replace with a non-scratched, non-warped disc.
An MD inside the MD changer cannot be played because Eject the disc then reload it properly.
it is loaded upside-down.
Displayed when a non-recorded MD is loaded in the MD
changer.
Load a pre-recorded MD in the MD changer.
If an error display other than the ones described above appears, press the reset button. If the problem persists, turn off the power and
consult your store of purchase.
XMD3
20
Download from Www.Somanuals.com. All Manuals Search And Download.
10. SPECIFICATIONS
FM Tuner
Audio
Frequency Range :
Maximum Power Output : 208 W (52 W ✕ 4 ch)
U.S.A
: 87.9 MHz to 107.9 MHz
Continuous Average Power Output :
Europe : 87.5 MHz to 108.0 MHz
Australia : 87.0 MHz to 108.0 MHz
17 W ✕ 4, into 4 Ω, 20 Hz to 20 kHz, 1%THD
Bass Control Action (60 Hz) : 15 dB
Treble Control Action (10 kHz) : 12 dB
Line Output Level (CD 1 kHz) : 2 V
Usable Sensitivity : 9 dBf
50dB Quieting Sensitivity : 15 dBf
Alternate Channel Selectivity : 70 dB
Stereo Separation (1 kHz) : 35 dB
Frequency Response ( 3 dB) : 30 Hz to 15 kHz
General
Power Supply Voltage :
14.4 V DC (10.8 to 15.6 V allowable), negative ground
AM Tuner
Current Consumption : Less than 15 A
Speaker Impedance : 4 Ω (4 Ω to 8 Ω allowable)
Weight / Source unit : 3.52 lb. (1.6 kg)
Frequency Range :
U.S.A
Europe
: 530 kHz to 1710 kHz
: 531 kHz to 1602 kHz
Dimensions / Source unit :
Australia : 531 kHz to 1629 kHz
7" (Width) ✕ 2" (Height) ✕ 6" (Depth)
[178 (W) ✕ 50 (H) ✕ 152 (D) mm]
Usable Sensitivity : 25 µV
Escutcheon section :
9" (Width) ✕ 4" (Height) ✕ 1-1/2" (Depth)
[232 (W) ✕ 95 (H) ✕ 28 (D) mm]
CD Player
System : Compact disc digital audio system
Usable Discs : Compact disc
Frequency Response ( 1 dB) : 10 Hz to 20 kHz
Signal to Noise Ratio (1 kHz) : 100 dB
Dynamic Range (1 kHz) : 95 dB
Harmonic Distortion : 0.01%
Note:
• Specifications and design are subject to change without notice for further improvement.
XMD3
21
Download from Www.Somanuals.com. All Manuals Search And Download.
XMD3
22
Download from Www.Somanuals.com. All Manuals Search And Download.
|