Euro Pro Blender EP96W User Manual

QUAD BLADE  
FOOD PROCESSOR/BLENDER  
OWNER’S MANUAL  
Model EP96W  
120V., 60Hz., 800 Watts  
EURO-PRO Operating LLC  
Boston, MA, 02465  
1 (800) 798-7398  
COPYRIGHT © 2008 EURO-PRO OPERATING LLC  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GETTING TO KNOW YOUR QUAD BLADE FOOD  
PROCESSING CENTER  
OPERATING INSTRUCTIONS  
Speed Control Dial  
5. Fit the spindle onto the motor shaft  
and the appropriate attachments  
onto the spindle. (Fig. 5)  
WARNING  
The food processor and blender  
speed control dial has speeds settings  
as follows: (Fig. 1)  
Off/1-9 + Max  
Pulse/Turbo  
TO REDUCE THE RISK OF  
INJURY, NEVER PLACE THE  
CUTTING BLADE ON THE BASE  
WITHOUT FIRST PUTTING THE  
BOWL PROPERLY IN PLACE.  
The speed can be  
adjusted while the  
food processor is  
Fig. 1  
in use.  
Fig. 5  
Use of the Pulse/Turbo button allows  
greater control over the texture of the  
food being processed. Use "Pulse"  
when the unit is in the "Off" position.  
Use "Turbo" when the unit is in the  
"On" position and you need a burst of  
power. Please note that the "Pulse"  
and "Turbo" is only intended to be  
used for short "bursts" of processing.  
6. Holding the  
processor lid  
by the feed tube,  
fit the lid by  
Fig. 6  
Operating the Food Processor  
rotating  
counterclockwise.  
(Fig. 6)  
Setting up:  
1. CAUTION: Make sure that the unit is  
unplugged from the power source and  
the the Speed control dial is in the  
"Off" position before inserting or  
removing any attachments and before  
cleaning.  
2. Fit the safety cover into the food  
processor body and turn  
counterclockwise firmly until it “clicks”  
into place (the arrows will now be  
lined up). IMPORTANT THE FOOD  
PROCESSOR WILL NOT OPERATE  
WITHOUT THE SAFETY COVER IN  
PLACE.  
7. Ensure that the lid  
tab has “clicked”  
into place and the  
arrows are lined  
up. (Fig. 8)  
17. Juice Extractor Filter  
18. Whipping Attachment  
19. Citrus Juicer Filter  
20. Juice Reamer  
21. Main Chopping Blade  
22. Double Chopping Blade  
23. Chopping Blade Protective Cover  
24. Blade Holder  
25. French Fry Disk Assembly  
26. Dough Blade  
27. Thick Slicing Blade  
28. Thin Slicing Blade  
29. Fine Chopping Blade  
30. Coarse Chopping Blade  
31. Spatula  
1. Processor Body  
2. Safety Cover  
3. Safety Cover/Blender Location  
4. On/Off Speed Control Dial  
5. Turbo/Pulse Button  
6. Drive Shaft  
7. Storage Compartment  
8. Blender Jar  
9. Blender Lid  
10. Measuring Cap  
11. Processor Bowl  
12. Spindle  
13. Processor Lid  
14. Food Pusher  
Fig. 7  
8. Plug the processor  
and switch on.  
If the processor  
does not come on,  
check that the  
machine cover and  
processor lid are  
both correctly fitted.  
(Fig. 8)  
3. Place the food processor bowl onto  
the processor body.  
There is no need  
to turn the bowl.  
(Fig. 2)  
Fig8  
4. When fitted correctly,  
the handle will be  
For safety, always  
use the food  
pusher when  
putting food into  
the feeder tube.  
Never feed by  
hand. (Fig. 9)  
to the right of the  
assembly, and the  
15. Juice Extractor Lid  
16. Juice Extractor Pusher  
Fig. 2  
ridge on the base  
of the bowl will fit into the slot at the  
back of the processor body.  
(Fig. 3 & Fig. 4)  
Technical Specifications  
Fig9  
WARNING: Always remove the  
blender and fit the safety cover into  
the processor body when using the  
processor.  
Voltage:  
Power:  
Food Processor Capacity:  
Blender Capacity:  
120V., 60Hz.  
800 Watts  
6 Cups (1.5 Liters)  
7 Cups (1.75 Liters)  
Fig. 3  
Fig. 4  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Using The Double Chopping Blade  
Using The Double Chopping Blade  
PROCESSING EXAMPLES WITH THE DOUBLE CHOPPING BLADE  
The processing times indicated below are approximate and also depend on the  
quantity of the food to be processed and the degree of fineness you require.  
(Cont.)  
Always disconnect unit from power  
source before cleaning or changing  
accessories.  
WARNING: USE EXTREME CAUTION  
WHEN HANDLING THE BLADES.  
THEY ARE EXTREMELY SHARP.  
ALWAYS remove the chopping blade  
protective covers before using.  
RECOMMENDED  
PRODUCT  
Meat*  
QUANTITY  
OPERATION TIMES  
SPEED  
High/Turbo  
Low  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
21 oz / 600 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
24.5 oz / 700 gr.  
4 slices  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
15 - 30 seconds  
20 seconds  
Onions  
Fig. 14  
Nuts  
High  
Fig. 13  
The double chopping  
blade may be  
Fish*  
Pulse  
Cheese  
Liquids (soups)  
Carrots  
Bread  
Pulse  
used with one  
blade or with  
two blades.  
Fig. 10  
Pulse  
pulse  
40-50 seconds  
40 - 50 seconds  
10 - 30 seconds  
10 seconds  
1. To use as  
a double  
5. Plug the processor into a wall outlet.  
6. Turn the speed control dial to the  
desired speed setting.  
Low  
Double  
Blade  
blade, carefully  
slip the separate  
blade over the  
shaft of the  
Apples  
24.5 oz / 700 gr.  
Max 4 bunches  
Max 4 cups/1 liter  
High  
Main Blade  
7. Keep hands and utensils away from  
the cutting blade while chopping  
food to reduce the risk of severe  
injury to persons or damage to the  
food processor. A scraper may be  
used, but ONLY when the food  
processor is NOT running and has  
been unplugged. Never feed food by  
hand. Always use the food pusher.  
(Fig. 15)  
Parsley  
Mayonnaise  
High/Turbo  
High  
30 seconds  
main blade.  
(Fig. 10 & Fig. 11)  
* Always allow food to cool before placing in the bowl.  
* Remove all bones before processing.  
Fig. 11  
Dough Blade  
CAUTION: Make sure that the unit is  
unplugged from the power source  
and the speed control dial is in the  
“OFF” position before inserting or  
removing attachments.  
1. Fit the processor bowl and spindle  
as described previously on page 4.  
2. Fit the dough blade over the spindle  
and press firmly into place. (Fig. 16)  
3. Place the ingredients into the bowl.  
4. Fit the lid and click into place as  
described in the “Setting Up” section  
(page 4).  
5. Plug in the food processor.  
6. Turn the food processor on selecting  
maximum speed. Maximum capacity  
for processing dough is based on  
the mixture of 21 oz. (600 g.) of  
flour and 14 oz. (400 g.) of water in  
order to obtain 2.2 Lbs. (1 kg.) of  
dough.  
8. When it is time to knead the dough,  
place speed control dial in the "Off"  
position and pulse until the dough is  
ready.  
9. Remove the blade from the bowl  
before removing the dough.  
WHEN KNEADING DOUGH, DO NOT  
OPERATE THE MACHINE LONGER  
THAN 20 SECONDS. AFTERWARDS  
WAIT AT LEAST 2 MINUTES BEFORE  
OPERATING THE MACHINE AGAIN.  
FOR SAFETY, ALWAYS LEAVE THE  
PUSHER IN PLACE WHILE  
Two Blades Together  
2. Then insert onto the shaft of the  
processor bowl. Always hold the  
chopping blade by the upper plastic  
part. (Fig. 12)  
Fig. 15  
8. When finished processing the  
ingredients, remove the processor lid  
by turning clockwise.  
9. Remove the chopping blade first  
before removing the processed food.  
FOR SAFETY, ALWAYS USE THE  
FOOD PUSHER WHEN PUTTING  
FOOD INTO THE THE FEEDER TUBE.  
NEVER FEED BY HAND.  
10. Do NOT leave the appliance  
unsupervised when it is in the "ON"  
position.  
Fig. 12  
OPERATING THE PROCESSOR.  
3. Place ingredients to be processed in  
the bowl.  
4. Then holding the processor lid by the  
feeding tube, place the processor lid  
onto the bowl and turn counter  
clockwise to lock the lid in place.  
Ensure that the lid tab has "clicked"  
into place and that the arrow on the  
lid is aligned with the dot on the unit.  
Insert food pusher into feed chute.  
(Fig. 13 & Fig. 14)  
7. Recommended speed for making  
dough is maximum.  
Fig. 16  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Slicing & Shredding Blades  
French Fry Blade Assembly  
Whipping Attachment  
Juice Extractor (Cont.)  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the speed control dial is in the “OFF”  
position before inserting or removing  
attachments.  
1. Place the blade of your choice on  
the blade holder. Inserting the longer  
tab on the side of the blade first.  
(Fig. 17)  
2. Press the other end of the blade until  
it clicks into place. (Fig. 18)  
3. Fit the processor bowl and spindle  
as detailed on the page 4.  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the speed control dial is in the “OFF”  
position before inserting or removing  
attachments.  
Note: The French Fry Blade is already  
assembled to the blade holder. Do not  
try to remove it. (Fig. 20)  
1. Fit the processor bowl and spindle  
as detailed previously.  
2. Using the finger holes in the french fry  
blade holder, fit it over the spindle and  
press firmly into place as indicated.  
(Fig. 21)  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
4. Fit the lid and click into place as  
indicated in Setting Up section  
(page 4).  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the speed control dial is in the “OFF”  
position before inserting or removing  
attachments.  
3. Fit the juice extractor  
lid over the extractor  
and rotate counter  
clockwise ensuring  
that the lid tab has  
clicked into place  
4. Plug in processor.  
5. Turn speed control to minimum  
(use only on  
1. Fit the processor bowl and spindle as  
described previously on page 4.  
2. Fit the whipping attachment over the  
spindle and press firmly into place.  
(Fig. 22)  
3. Place the ingredients into the bowl.  
4. Fit the lid and click into place as  
described in the “Setting Up” section  
(page 4).  
5. Plug in the food processor.  
6. Turn the food processor on selecting  
high speed.  
7. Recommended speed for whipping  
is high.  
8. Remove the whipping attachment from  
the bowl before removing the whipped  
ingredients.  
FOR SAFETY, ALWAYS LEAVE THE  
PUSHER IN PLACE WHILE OPERATING  
THE PROCESSOR.  
minimum speed).  
6. Use the juice  
extractor pusher  
to add fruit into  
the food tube.  
(Fig. 25)  
4. Using the finger holes in the blade  
holder, fit it over the spindle and  
press firmly into place as indicated.  
(Fig. 19)  
Fig. 25  
7. If the juice extractor becomes  
clogged during use, turn the  
processor off and remove the  
juice extractor. The excess pulp  
can now easily be removed  
using the spatula.  
WARNING: USE EXTREME  
CAUTION WHEN HANDLING  
BLADES. BLADES ARE SHARP.  
5. Fit the lid and click into place as  
described in the Setting Up section  
(page 4).  
5. Plug in the processor.  
Be sure to switch the appliance  
to the “OFF” position after each  
use. Make sure the motor stops  
completely and you unplug the  
unit before disassembling.  
FOR SAFETY, ALWAYS USE  
THE PUSHER WHEN  
PUTTING FRUIT INTO THE  
FEEDER TUBE - NEVER FEED  
BY HAND.  
Do not put your fingers or other  
objects into the juicer opening  
while it is operation. If food  
becomes lodged in the opening,  
use food pusher or another  
piece of fruit or vegetable to  
push it down. When this  
method of removing food lodged  
in the opening is not possible,  
turn the appliance off, unplug  
the unit and disassemble juicer  
to remove the remaining food.  
6. WARNING: USE THE FOOD  
PUSHER TO ADD FOOD INTO THE  
PROCESSOR BOWL THROUGH  
THE FEEDER TUBE.  
6. Plug in the processor.  
7. WARNING: USE THE FOOD  
PUSHER TO ADD FOOD INTO  
THE PROCESSOR BOWL  
THROUGH THE FEEDER TUBE.  
Do not overload the food processor bowl.  
In one operation, you can process a  
maximum of 6 cups (1500 ml) of food.  
Do not overload the bowl. In one  
operation, you can process a  
maximum 6 cups (1500 ml) of food.  
Fig. 22  
Note: When whipping thin liquids such as  
skim milk, use only 3 oz. of liquid at a time.  
Fig. 21  
Fig. 20  
Juice Extractor  
CAUTION: Make sure that the unit  
is unplugged from the power  
source and the speed control dial  
is in the “OFF” position before  
inserting or removing  
Fig. 17  
Fig. 18  
FINE  
SLICING  
THICK  
SLICING  
FINE  
SHREDDING  
COARSE  
SHREDDING  
attachments.  
1. Fit the processor  
bowl as detailed  
previously  
For fine slicing:  
-
Recommended speed  
level is High  
(Cucumbers, raw  
potatoes, lettuce,  
carrots)  
(page 4). (Fig. 23)  
2. Fit the juice  
Fig. 23  
extractor/filter into  
the processor bowl.  
(Fig. 24)  
For coarse slicing: -  
For fine shredding:-  
Recommended speed  
level is High  
(Cabbage, carrots,  
onions)  
Fig. 19  
Recommended speed  
level is High  
(Carrots, cucumbers,  
cabbage)  
Fig. 24  
For coarse shredding:- Recommended speed  
level is High  
(Lettuce, carrots,  
apples)  
8
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
OPERATING INSTRUCTIONS  
OPERATING INSTRUCTIONS  
Citrus Juice Filter  
Operating the Blender (Cont.)  
Re-settable Thermal Safety  
Device  
Your Quad Blade Food  
Operating the Blender (Cont.)  
CAUTION: Make sure that the unit is  
unplugged from the power source and  
the speed control dial is in the “OFF”  
position before inserting or removing  
attachments.  
WARNING: Always Operate The Juicer At  
Lowest Speed Only. Do Not Operate The 3. Place the blender  
Citrus Juicer At Higher Speeds.  
2. Remove the safety  
cover. This can only  
be done once the  
processor lid has  
been removed.  
NOTE: You can crush 16 oz.  
(500 ml) of ice cubes in the blender  
using the PULSE/TURBO button.  
CAUTION: To prevent spilling  
(overflow) do NOT operate the  
blender with more than 4 cups  
(1000 ml) of soft liquid (i.e. soup) at  
one time.  
Always operate the blender with the  
blender lid in place.  
When blending hot liquids, always  
remove the small measuring cap in  
the blender lid.  
Processor/Blender has been designed  
with a unique safety system which  
prevents damage to the unit’s motor  
and drive system, should you  
inadvertently overload your appliance.  
The safety system will automatically cut  
the electric power to the appliance  
when the device senses an overload or  
excessive temperature in the motor or  
drive system. Should this occur during  
use and the appliance stops  
functioning, following is the re-setting  
procedure:  
1. Turn the “ON/OFF” speed control  
to the “OFF” position  
2. Unplug the unit from the wall  
receptacle.  
3. Remove and empty the processor  
bowl. Ensure that no food is  
jamming the cutting blades or  
attachments.  
4. Allow the appliance to cool down  
for a minimum of 30 minutes.  
5. Re-install the processor bowl and  
re-plug appliance in the wall outlet.  
6. Proceed to use the appliance as  
before. Should the appliance still  
fail to operate, turn the “ON/OFF”  
speed control to the “OFF” position  
and unplug from the wall outlet.  
Allow the appliance to cool down  
for an additional 1 to 2 hours. After  
this time has passed, repeat the  
restart procedure, steps 5 and 6  
above.  
(Fig. 30)  
Fig. 30  
into its location on  
the processor body  
with the handle to the  
left. Turn counter  
clockwise until the  
blender clicks into  
1. Fit the processor bowl  
as detailed previously  
(page 4).  
2. Fit the citrus juice filter  
into the processor  
bowl. (Fig. 26)  
*
*
place and the arrows  
are aligned. (Fig. 31)  
Warning: Use extreme caution -  
blades are sharp. Handle carefully.  
4. Place food in blender.  
5. Place the blender lid  
and the measuring  
cap on the blender.  
(Fig. 32)  
Fig. 31  
*
*
Avoid contact with moving parts at  
all times.  
Keep hair, clothing as well as  
spatulas and other kitchen utensils  
out of the blender jar while in  
operation to reduce the risk of  
severe injury to persons or damage  
to the blender. A spatula may be  
used but ONLY when the unit is not  
in use.  
Fig. 26  
3. Rotate counter  
clockwise. Ensure  
that the citrus juice  
filter tab has clicked  
into place. (Fig. 27)  
6. Replace the  
processor bowl  
Fig. 27  
and processor lid.  
Ensure that the lid  
tab has clicked into  
place. The blender  
will not operate if  
the processor lid is  
not clicked in place.  
Make sure that  
Fig. 32  
4. Insert the juice  
NOTE:  
reamer into the center  
of the citrus juice filter  
with its shaft inside  
the central column of  
the bowl. (Fig. 28)  
TO REMOVE THE  
BLENDER, YOU MUST  
FIRST UNLOCK AND  
REMOVE THE  
PROCESSOR LID (A).  
THEN UNLOCK AND  
REMOVE THE BLENDER (B)  
BY TWISTING CLOCKWISE.  
(Fig. 34)  
Fig. 34  
Fig. 33  
NO ATTACHMENTS  
Fig. 28  
5. Plug in the appliance.  
6. Place fruit on juice reamer and hold with  
a cupped hand.  
7. Operate at minimum speed.  
WARNING: Always operate the  
juicer at minimum speed only.  
Do not operate the citrus juicer at  
higher speeds.  
are inside the food processor bowl  
when you are using the blender.  
(Fig. 33)  
WARNING:  
7. Plug in the processor.  
8. Always operate the blender with the  
lid in place.  
9. Recommended speed levels for  
blending are between 5 - MAX.  
When blending soft vegetables or  
fruits start with level "5" and then go  
to a higher level. For hard  
vegetables or fruit always use "  
MAX" speed level.  
ALWAYS REMOVE THE  
BLENDER AND FIT THE  
SAFETY COVER INTO THE  
PROCESSOR BODY WHEN  
USING THE PROCESSOR.  
(Fig. 35 & 36)  
Fig. 35  
Operating the Blender  
CAUTION: Make sure that the unit is  
unplugged from the power source  
and the speed control dial is in the  
“OFF” position before inserting or  
removing attachments.  
Fig. 36  
IMPORTANT: Do NOT load the  
blender with more than 10 oz.  
(300 gr.) of hard vegetables at one  
time. Do NOT operate continuously  
for more than 20 seconds at one  
time.  
1. Remove the processor  
bowl and lid. (Fig. 29)  
Fig. 29  
9
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Model EP96W  
CLEANING & MAINTENANCE  
CAUTION: Make sure that the unit is unplugged from power source and speed  
control dial is in the “OFF” position before inserting or removing any  
attachments and before cleaning.  
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO OPERATING LLC warrants this product to be free from  
defects in material and workmanship for a period of one (1) year from  
the date of purchase when utilized for normal household use.  
Never immerse the unit, cord or plug  
in water or any other liquid.  
Clean the main unit with a damp  
cloth only.  
Only the stainless steel blades can  
be washed in the dishwasher.  
All other parts can be cleaned in  
warm sudsy water using regular  
dishwashing liquid.  
If food has spilled over on to the  
main unit, use the pointy end of the  
spatula to clean the cracks and  
crevices of the base under the food  
processor bowl.  
To clean the blender, fill the blender  
jar with warm, sudsy water, place  
the blender lid on the unit and run  
the blender at speed level "MAX"  
for 30 seconds. Rinse and repeat if  
necessary.  
Using the Storage Compartment  
Your QUAD BLADE Food  
Processor/Blender comes with a  
storage compartment. (Fig. 37)  
If your appliance fails to operate properly while in use under normal  
household conditions within the warranty period, return the complete  
appliance and accessories, freight prepaid. For Customer Service  
the appliance is found to be defective in material or workmanship,  
EURO-PRO Operating LLC will repair or replace it free of charge. Proof  
of purchase date and $14.95 to cover the cost of return shipping and  
handling must be included.*  
Fig. 37  
The liability of EURO-PRO Operating LLC is limited solely to the cost of  
the repair or replacement of the unit at our option. This warranty does  
not cover normal wear of parts and does not apply to any unit that has  
been tampered with or used for commercial purposes. This limited  
warranty does not cover damage caused by misuse, abuse, negligent  
handling or damage due to faulty packaging or mishandling in transit.  
1. Lift the lid of the storage  
compartment.  
2. Place attachments inside as  
shown above.  
Hints & Tips:  
Spatula Storage  
The double chopping blade can be  
used for chopping meat, fish,  
vegetables, cheese, etc. setting  
the speed to maximum.  
Slide the spatula into the slot provided  
on the side of the processor body.  
(Fig. 38)  
This warranty is extended to the original purchaser of the unit and  
excludes all other legal and/or conventional warranties. The  
responsibility of EURO-PRO Operating LLC if any, is limited to the  
specific obligations expressly assumed by it under the terms of the  
limited warranty. In no event is EURO-PRO Operating LLC liable for  
incidental or consequential damages of any nature whatsoever. Some  
states do not permit the exclusion or limitation of incidental or  
consequential damages, so the above may not apply to you.  
For finer chopping, increase the  
length of time you process.  
For coarser chopping, use the pulse  
button for a few seconds and monitor  
food texture.  
Pre-cut larger pieces to make them fit  
into the feed tube. When chopping  
hard foods (e.g. meat, cheese) cut  
into 1 “/2.4 cm cubes.  
For shredding, place food horizontally  
into the feed tube, for slicing place the  
food vertically.  
When blending, pour the liquids in  
first and then add the solid food.  
Begin blending at the lower speed  
and increase when needed.  
This warranty gives you specific legal rights, and you may also have  
other rights which vary from state to state.  
Fig. 38  
Cord Storage  
The power supply cord can be  
stored by feeding it into the opening  
at the back of the food processor  
body. (Fig. 39)  
*Important: Carefully pack item to avoid damage in shipping. Be  
sure to include proof of purchase date and to attach tag to item  
before packing with your name, complete address and phone  
number with a note giving purchase information, model number  
and what you believe is the problem with item. We recommend you  
insure the package (as damage in shipping is not covered by your  
warranty). Mark the outside of your package “ATTENTION  
CUSTOMER SERVICE”. We are constantly striving to improve our  
products, therefore the specifications contained herein are subject  
to change without notice.  
Fig. 39  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printed in Turkey  

Cobra Electronics Marine Radio MRHH350FLT User Manual
Contec Universal Remote RT U49C User Manual
Crown Audio Stereo Amplifier 1201 2401 User Manual
Dantax Flat Panel Television 32LCD V9 User Manual
Eagle Electronics Fish Finder 500C 500CDF User Manual
Electro Voice Microphone 903E User Manual
Estate Marine Radio W10017730 User Manual
Gateway Computer Monitor HD2202 User Manual
GE Drill GE752 User Manual
GE Washer GBSR1080 User Manual