Quick Start Guide
Cisco Small Business
ISA500 Series Integrated Security Appliances
(ISA550, ISA550W, ISA570, ISA570W)
Package Contents
•
•
•
•
•
•
•
ISA500 Series Integrated Security Appliance
Two Wi-Fi Antennas (for ISA550W and ISA570W only)
Rack Mounting and Desktop Placement Kit
Power Cord and Adapter
RJ-45 Ethernet Cable
Quick Start Guide
Product CD
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting to Know the Cisco ISA500 Series
Integrated Security Appliances
2
This section lists the available model numbers to help you become familiar
with your security appliance, and shows the front panel and back panel of
the unit.
Product Models
Model
ISA550
Description
Cisco ISA550 Integrated 1 WAN port, 2 LAN ports, 4 configurable
Security Appliance ports, and 1 USB 2.0 port
Configuration
ISA550W Cisco ISA550 Integrated 1 WAN port, 2 LAN ports, 4 configurable
Security Appliance with ports, 1 USB 2.0 port, and 802.11b/g/n
Wi-Fi
ISA570
Cisco ISA570 Integrated 1 WAN port, 4 LAN ports, 5 configurable
Security Appliance ports, and 1 USB 2.0 port
ISA570W Cisco ISA570 Integrated 1 WAN port, 4 LAN ports, 5 configurable
Security Appliance with ports, 1 USB 2.0 port, and 802.11b/g/n
Wi-Fi
NOTE Any configurable port can be configured to be a WAN, DMZ, or LAN
port. Only one configurable port can be configured as a WAN port at a
time. Up to 4 configurable ports can be configured as DMZ ports.
Front Panel
ISA550 Front Panel
ISA550
Cisco Small Business
SPEED
LINK /ACT
1
2
3
4
5
6
7
POWER/SYS VPN
USB
WAN
LAN
CONFIGURABLE
ISA550W Front Panel
ISA550W
Cisco Small Business
SPEED
LINK /ACT
1
2
3
4
5
6
7
POWER/SYS VPN
USB
WLAN
WAN
LAN
CONFIGURABLE
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ISA570 Front Panel
ISA570
Cisco Small Business
SPEED
LINK /ACT
1
2
3
4
5
6
7
8
9
10
POWER/SYS VPN
USB
WAN
LAN
CONFIGURABLE
ISA570W Front Panel
ISA570W
Cisco Small Business
SPEED
LINK /ACT
1
2
3
4
5
6
7
8
9
10
POWER/SYS VPN
USB
WLAN
WAN
LAN
CONFIGURABLE
Front Panel Lights
The following table describes the lights on the front panel of the security
appliance. These lights are used for monitoring system activity.
Light
Description
POWER/SYS
Indicates the power and system status.
•
Solid green when the system is powered on and is
operating normally.
•
•
Flashes green when the system is booting.
Solid amber when the system has a booting problem, a
device error occurs, or the system has a problem.
VPN
Indicates the site-to-site VPN connection status.
•
•
•
Solid green when there are active site-to-site VPN
connections.
Flashes green when attempting to establish a site-to-site
VPN tunnel.
Flashes amber when the system is experiencing problems
setting up a site-to-site VPN connection and there is no
VPN connection.
USB
Indicates the USB device status.
•
Solid green when a USB device is detected and is
operating normally.
•
Flashes green when the USB device is transmitting and
receiving data.
WLAN
Indicates the WLAN status.
•
•
Solid green when the WLAN is up.
(ISA550W and
ISA570W only)
Flashes green when the WLAN is transmitting and
receiving data.
4
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Light
Description
SPEED
Indicates the traffic rate of the associated port.
•
•
Off when the traffic rate is 10 or 100 Mbps.
Solid green when the traffic rate is 1000 Mbps.
LINK/ACT
Indicates that a connection is being made through the port.
•
•
Solid green when the link is up.
Flashes green when the port is transmitting and receiving
data.
Back Panel
The back panel is where you connect the network devices. The ports on
the back panel vary depending on the model.
ISA550 and ISA550W Back Panel
Power
Switch
Reset
Button
ANT01
ANT02
7
6
5
4
3
2
1
12VDC
ANT01
ANT02
I
O
LAN
WAN
CONFIGURABLE
RESET
POWER
Power
Connector
WAN
Port
USB
Port
Configurable LAN
Ports Ports
ISA570 and ISA570W Back Panel
Power
Switch
Reset
ANT01
Button
ANT02
10
9
8
7
6
1
5
4
3
2
12VDC
ANT01
ANT02
I
O
CONFIGURABLE
LAN
WAN
RESET
POWER
Power
Connector
WAN
Port
USB
Port
Configurable
Ports
LAN
Ports
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Back Panel Descriptions
Feature
Description
ANT01/ANT02
Threaded connectors for the antennas (for ISA550W and
ISA570W only).
USB Port
Connects the unit to a USB device. You can use a USB
device to save and restore system configuration, or to
upgrade the firmware.
Configurable
Ports
Can be set to operate as WAN, LAN, or DMZ ports. The
ISA550 and ISA550W have 4 configurable ports. The
ISA570 and ISA570W have 5 configurable ports.
NOTE Only one configurable port can be configured as a
WAN port at a time. Up to 4 configurable ports can be
configured as DMZ ports.
LAN Ports
Connects PCs and other network appliances to the unit.The
ISA550 and ISA550W have 2 dedicated LAN ports. The
ISA570 and ISA570W have 4 dedicated LAN ports.
WAN Port
Connects the unit to a DSL or cable modem, or other WAN
connectivity device.
RESET Button
To reboot the unit, push and release the RESET button for
less than 3 seconds.
To restore the unit to its factory default settings, push and
hold the RESET button for a minimum of 3 seconds while
the unit is powered on. The POWER/SYS light will flash
green when the system is rebooting.
Power Switch
Powers the unit on or off.
Power Connector Connects the unit to power using the supplied power cord
and adapter.
Mounting the Cisco ISA500 Series
Integrated Security Appliances
3
You can place your security appliance on a desktop, mount it on a wall, or
mount it in a rack.
Placement Tips
•
•
Ambient Temperature: To prevent the security appliance from
overheating, do not operate it in an area that exceeds an ambient
temperature of 104°F (40°C).
Air Flow: Be sure that there is adequate air flow around the security
appliance.
6
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Mechanical Loading: Be sure that the security appliance is level and
stable to avoid any hazardous conditions.
To place your security appliance on a desktop, install the supplied four
rubber feet on the bottom of the security appliance. Place the security
appliance on a flat surface.
Wall Mounting
The wall mounting hardware is user-supplied. We recommend that you use
the following mounting screws to install your security appliance to the wall.
The wall-mounting features on the bottom of the unit allow the front of the
unit to face either upward or downward.
1
3
2
4
1 8 mm/0.32 in
2 25 mm/0.98 in 3 6.5 mm/0.26 in 4 18.6 mm/0.73 in
WARNING Insecure mounting might damage the device or cause injury.
Cisco is not responsible for damages incurred by improper
wall-mounting.
STEP 1 Determine where you want to mount the security appliance. Verify
that the surface is smooth, flat, dry, and sturdy.
STEP 2 Secure two M3 x 0.63 inch (16 mm) pan head wood screws, with
anchors, into the wall 9.21 inches (234 mm) apart horizontally.
Leave about 1/8 inch (3 to 4 mm) of the screw threads beneath the
screw head exposed.
STEP 3 Place the wall-mount slots over the screws and slide the unit down
until the screws fit snugly into the wall-mount slots.
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Rack Mounting
You can mount the security appliance in any standard size, 19-inch (about
48 cm) wide rack. The security appliance requires 1 rack unit (RU) of
space, which is 1.75 inches (44.45 mm) high. The rack-mounting kit is
included with the unit.
CAUTION
Do not overload the power outlet or circuit when installing
multiple devices in a rack.
STEP 1 Place one of the supplied silicon rubber spacers on the side of the
security appliance so that the four holes align to the screw holes.
Place the rack mount bracket next to the silicon rubber spacer and
install the M3 screws.
STEP 2 Install the security appliance into a standard rack as shown below.
Place the washers on the brackets so that the holes align to the
screw holes and then install the M5 screws.
Step 2
Step 1
Connecting the Cisco ISA500 Series
Integrated Security Appliances
4
STEP 1 If you are installing the ISA550W or ISA570W, screw each antenna
onto a threaded connector on the back panel. Orient each antenna
to point upward.
STEP 2 Connect the security appliance to power using the supplied
power cord and adapter. Make sure that the power switch is
turned off.
8
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 3 For a DSL or cable modem, or other WAN connectivity devices,
connect an Ethernet network cable from the device to the WAN
port on the back panel. Cisco strongly recommends using
Category 5E or better cable.
STEP 4 (Optional) For network devices, connect an Ethernet network cable
from the network device to an available LAN port on the back panel.
STEP 5 Power on the connected devices.
STEP 6 Power on the security appliance. The lights on the front panel for
all connected ports light up to show active connections.
A sample configuration is illustrated below.
Internet
Access
Network
Device
Public
Devices
Web Server
Power
10
9
8
7
6
1
5
4
3
2
12VDC
ANT01
ANT02
I
O
CONFIGURABLE
LAN
WAN
RESET
POWER
Getting Started with the Configuration
5
You can log in to the ISA500 Series Configuration Utility and complete the
initial configuration by using the Setup Wizard; follow these steps:
STEP 1 Connect a computer to an available LAN port on the back panel of
the security appliance.
Your PC will become a DHCP client of the security appliance and
will receive an IP address in the 192.168.75.x range.
STEP 2 Start a web browser. In the Address bar, enter the default LAN IP
address of the security appliance: 192.168.75.1.
STEP 3 When the login page opens, enter the username and password.
The default username is cisco. The default password is cisco.
Usernames and passwords are case sensitive.
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
9
Download from Www.Somanuals.com. All Manuals Search And Download.
STEP 4 Click Login.
For security purposes, you must change the default password of
the default administrator account.
STEP 5 Enter the new administrator password and click OK.
The Setup Wizard will now launch.
STEP 6 Follow the on-screen prompts to complete the initial configuration.
Suggested Next Steps
6
Congratulations, you are now ready to start using your security appliance.
You may want to configure some of the following items to secure your
network:
•
•
•
•
•
•
Upgrade your firmware to the latest version.
Configure the VLANs, DMZs, and WLANs.
Configure the zones.
Configure the WAN redundancy if you have two ISP links.
Configure the zone-based firewall.
Configure the UTM services such as Intrusion Prevention (IPS),
Anti-Virus, Application Control, Spam Filter, Web URL Filtering, and Web
Reputation.
•
•
Configure the VPNs for site-to-site and remote secure access.
Configure the WAN, LAN, and Wireless QoS settings.
To configure these features, you can use the wizards or menus in the left
navigation pane of the Configuration Utility. For complete details, see the
Cisco ISA500 Series Integrated Security Appliances Administration Guide
10
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Where to Go From Here
7
Support
Cisco Small Business
Support Community
Cisco Small Business
Support and Resources
Phone Support Contacts
Firmware Downloads
Product Documentation
Cisco ISA500 Series
Integrated Security
Appliances Technical
Documentation
Cisco Small Business
Cisco Partner Central for
Small Business (Partner
Login Required)
Cisco ISA500 Series Integrated Security Appliances Quick Start Guide
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Americas Headquarters
Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
USA
78-19625-01
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S.
trademarks. Third party trademarks mentioned are the property of their respective owners.
The use of the word partner does not imply a partnership relationship between Cisco and any
other company. (1005R)
© 2012 Cisco Systems, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|