I N S T A L L A T I O N I N S T R U C T I O N S
CABLE LOCK KIT
LC-1 & LC-1-12
PARTS LIST
The cable lock kit is used as a projector accessory. The kit
includes a coiled cable that extends to the applicable
length, two steel security pads, a 2-gram tube of super glue
gel, and a 30mm padlock.
Unpack the shipping carton and check for the contents
listed in Table 1 and shown in Figure 1.
Table 1. Parts List
The cable lock kit is supplied in two models numbers:
LC-1
QTY
1
LC-1-12
•
LC-1
Coiled cable, extends six feet.
REF
DESCRIPTION
QTY
•
LC-1-12
Coiled cable, extends 12 feet.
10A COILED CABLE, 6 feet
10B
20
COILED CABLE, 12 feet
SECURITY PADS, steel
SUPER GLUE GEL, 2-grams
PADLOCK, 30mm
1
2
1
1
2
1
2
1
1
2
1
PARTS
10A OR 10B
30
40
40
50
KEY, padlock
20
20
60
PREP PAD, Alcohol
INSTALLATION
30
To install the coiled cable (10A or 10B), do the following:
1. Locate the two flat surfaces where the security pads
(20) will be installed.
50
2. Clean the two flat surfaces using the alcohol prep pad
(60).
60
Figure 1. Parts
WARNING: Before using the super glue gel, read
the printed instructions on the tube carefully to avoid
personal injury.
3. Apply super glue gel (30) onto the cleaned flat surface
where the first security pad (20) will be placed.
4. Place the security pad (20) onto the cleaned surface.
5. Apply pressure onto the pad, as needed.
6. Repeat Steps 3 through 5 to install the second security
pad (20).
7. Connect coiled cable (10A or 10B) to security pad
(20) using the padlock (40). Retain the keys (50).
CHIEF MANUFACTURING INC.
8810-000010 (Rev. A)
©2005 Chief Manufacturing
10/05
1-800-582-6480 952-894-6280 FAX 952-894-6918
8401 EAGLE CREEK PARKWAY, STE. 700
SAVAGE, MINNESOTA 55378 USA
Download from Www.Somanuals.com. All Manuals Search And Download.
|