E
DATA PROJECTOR
XJ-S30/XJ-S35
User’s Guide
z Be sure to read the precautions in the
separate User’s Guide (Basic Operation). For
details about setting up the projector and lamp
replacement, see the User’s Guide (Basic
Operation).
z Be sure to keep all user documentation handy
for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
XJ-S35 Users............................................................................................................... 4
Image Operations During Projection................................................................. 5
Zooming an Image....................................................................................................... 6
Momentarily Cutting Off the Input Source Image.........................................................7
Freezing an Image....................................................................................................... 7
Eco Mode.......................................................................................................... 9
Displaying the Setup Menu........................................................................................ 11
Basic Setup Menu Example....................................................................................... 12
Password Protecting the Projector.................................................................. 13
Image Adjustment Main Menu ...................................................................................18
Screen Settings Main Menu....................................................................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Projection Distance and Screen Size.............................................................. 30
Full-screen Display of an RGB Image........................................................................32
About this manual...
z This manual assumes that you are already familiar with the contents of the separate
“User’s Guide (Basic Operation)”.
z All of the operations in this manual are explained using the remote controller that comes
with the projector. The following key operations can also be performed on the projector
instead of the remote controller: [MENU], [S], [T], [X], [W], [ENTER], [ESC], [
[INPUT], [AUTO], [ZOOM +], [ZOOM –], [FOCUS S], [FOCUS T].
],
To perform this remote
Use this projector button:
controller operation:
[ENTER]
Button in the center of the cursor keys
[ZOOM +], [ZOOM –]
[ZOOM] button in combination with the [W] and [X] buttons
[FOCUS] button in combination with the [S] and [T] buttons
[FOCUS S], [FOCUS T]
XJ-S35 Users
This manual does not include information about using the XJ-S35 model projector while a
USB device is connected to its USB port. For details about connecting USB devices to the
XJ-S35 projector and procedures you need to perform to project images from a USB
device, see “USB Function Guide” on the bundled CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Operation During Projection
This section explains the various types of operations you can perform while the projector is
projecting an image.
Image Operations During Projection
You can perform the following operations while projecting an image.
z Image brightness adjustment
z Color mode selection
z Image zooming
z Momentary cut off of the input source image and projection of a black or blue screen, or
a logo
z Image freeze
z Pointer display in the projected image
z Aspect ratio switching (between 4:3 and 16:9)
Adjusting Image Brightness
Note
(for XJ-S35 model users)
device connected to the projector’s USB port.
To adjust image brightness
Press the [BRIGHT] key.
z This displays the brightness adjustment window.
1
Use the [W] and [X] keys to adjust image brightness.
2
3
To hide the window, press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Selecting the Color Mode
You can select from among five different color mode settings to optimize the projected
image in accordance with image contents and projection conditions.
Note
(for XJ-S35 model users)
device connected to the projector’s USB port.
To change the color mode
Press the [COLOR MODE] key.
z This displays the color mode selection window. The currently selected color mode is the
1
one whose button is selected (filled in).
Use the [T] and [S] keys to move the highlighting to the color mode you want
to select, and then press the [ENTER] key.
z This will select the button next to the highlighted color mode name.
2
To hide the window, press the [ESC] key.
3
Zooming an Image
Press the [D-ZOOM +] or [D-ZOOM –] key.
1
z This will cause
to appear in the projected image.
Use the cursor keys to move the
the center of the enlarged image.
to the part of the image that you want in
2
3
Press (or hold down) the [D-ZOOM +] key.
z Each press of the [D-ZOOM +] key enlarges the image one step. Holding down the
[D-ZOOM +] key continually enlarges the image.
z Pressing the [D-ZOOM –] key while an image is enlarged reduces the zooming by one
step. Holding down the [D-ZOOM –] key continually reduces the size of the image.
z While an image is zoomed, you can use the cursor keys to scroll the view to other
parts of the image.
To exit the zoom operation, press the [ESC] key.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Momentarily Cutting Off the Input Source Image
Press the [BLANK] key.
z This temporarily cuts off the image from the input source and projects a black screen in
1
its place.
To resume projection of the image from the input source, press the [BLANK] key
(or [ESC] key).
2
Note
You can specify projection of a black screen or blue screen, or a logo. For details, see
Freezing an Image
Pressing the [FREEZE] key freezes the projected image.
To freeze the projected image
While an image is being projected from an input source, press the [FREEZE]
key.
z This will capture the image that is on the screen at the moment you press [FREEZE]
1
and stores it in projector memory. That image remains projected on the screen.
To restore projection of the image from an input source, press the [ESC] key.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Displaying a Pointer in the Projected Image
You can select from among eight different pointer styles, including various arrow styles, for
display in the projected image. Pointers can be used during a presentation to indicate or
highlight a specific part of the image.
Arrow 1
Oval 1
Spot 2
Note
Depending on the pointer style you are using, the pointer may not display properly
when you are using keystone correction. If this happens, use the [KEYSTONE +] and
[KEYSTONE –] keys to change the keystone correction value to zero.
To display a pointer in the image
Press the [POINTER] key.
z This will cause a pointer to appear in the image.
1
z You also can use the setup menu to specify the pointer type that appears first when you
Use the cursor keys to move the pointer to the location you want.
z Holding down a cursor key moves the cursor at high speed.
2
To modify the pointer as described below, press the [STYLE] key.
3
For this pointer type:
Arrow 1 / Arrow 2
Bar 1 / Bar 2
Pressing [STYLE] will do this:
Rotate the arrow by 90 degrees
Toggle between flashing and not flashing
Toggle between flashing and not flashing
Oval 1 / Oval 2
Spot 1 / Spot 2
Cycle the darkness (transparency) of the area not
covered by the spot among two levels
To select the pointer type
Press the [POINTER] key to display the pointer.
1
2
Keep pressing the [POINTER] key until the pointer you want is displayed.
z Each press of the [POINTER] key cycles through the available pointer types.
To clear the pointer from the image
Press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Changing the aspect ratio of the projected image
Press the [ASPECT] key to toggle the aspect ratio of the displayed image between 4:3
and 16:9.
Note
z The aspect ratio setting affects the projected image only when the input source is
VIDEO or component.
z When the input source is a component signal with an aspect ratio of 16:9, the
aspect ratio switches automatically to 16:9. When this happens, pressing the
[ASPECT] key will not change the aspect ratio.
z You also can change the aspect ratio setting using the setup menu. For details, see
Important!
Note that enlarging or reducing the size of an image using the [ASPECT] key for
commercial purposes or public presentation may infringe on the legally protected
copyright of the copyright holder of the original material.
Eco Mode
Turning on the Eco Mode reduces lamp brightness to save power. The projector’s cooling fan
also operates at a slower speed while the Eco Mode is turned on, which results in quieter
operation.
Turn on the Eco Mode when your priority is quieter operation. Turn off the Eco Mode when
your priority is maximum brightness.
To turn the Eco Mode on or off
Press [ECO] to toggle the Eco Mode on and off.
Note
(for XJ-S35 model users)
device connected to the projector’s USB port.
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Using the [FUNC] Key
Pressing the [FUNC] key displays the menu shown below.
You can use this menu to perform the operations described below.
z Adjust image brightness
Highlight “Brightness” and then press the [ENTER] key.
• This performs the same operation as pressing the [BRIGHT] key ( key) described on
page 5.
z Turn the Eco Mode on or off
Highlight “Eco Mode” and then press the [ENTER] key.
• This performs the same operation as pressing the [ECO] key (
page 9.
key) described on
U
z Select the aspect ratio of the projected image
Highlight “Aspect Ratio” and then press the [ENTER] key.
• This performs the same operation as pressing the [ASPECT] key ( key) described on
ꢀ
page 9.
Note
(for XJ-S35 model users)
When you have an external device connected to the projector’s USB port, use the
[FUNC], [ ], [ ], and [ ] keys to control the connected device. For details, see the
U
ꢀ
“USB Function Guide” on the bundled CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Configuring Advanced Projector Settings
Your projector has a setup menu that you can use to configure advanced settings.
Basic Setup Menu Operations
Displaying the Setup Menu
Pressing the [MENU] key displays the menu shown below in the center of the projection
screen.
Main menu
The main menu includes seven (eight on the
XJ-S35) main menu items. The currently
selected main menu item is the one that is
highlighted.
Sub-menu
The sub-menu shows each individual setting
under each main menu item, and its current
setting.
Guidance text
Guidance text provides a brief description of the
main key operations available for the operation
you are currently performing.
Note
You can position the setup menu in the center or on the left edge of the projection
To exit the setup menu
Press the [MENU] key.
Configuring Setup Menu Settings
Press the [MENU] key to display the setup menu.
1
2
Use the [T] and [S] keys to select the main menu item you want by
highlighting it.
Press the [ENTER] key.
3
4
Use the [T] and [S] keys to select the sub-menu item you want by highlighting
it.
Perform the required operation on the selected sub-menu item screen.
z The guidance text explains the operations you need to perform to configure each setting.
5
To return to the main menu from the sub-menu, press the [ESC] key.
6
7
To exit the setup menu, press the [MENU] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Basic Setup Menu Example
The procedure below shows how to configure the following three settings:
• Image Adjustment J Contrast
• Image Adjustment J Color Mode
• Option Settings 1 J Eco Mode
Note
z Certain settings on the setup menu cannot be changed while there is no input signal
to the projector. Because of this, you should configure setup menu settings after
selecting an input source and starting projection.
To configure the “Image Adjustment J Contrast” setting
Press the [MENU] key to display the setup menu.
1
2
“Image Adjustment” is initially selected on the main menu, so simply press the
[ENTER] key.
Press the [T] key once to select “Contrast”.
3
Use the [W] (lighter) and [X] (darker) keys to adjust contrast.
4
To configure the “Image Adjustment J Color Mode” setting
Press the [T] key once to select “Color Mode”.
5
Press the [ENTER] key.
6
z This displays the color mode menu.
Use the [T] and [S] keys to select the color mode you want.
7
8
After selecting the color mode you want, press the [ESC] key.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
To configure the “Option Settings 1 J Eco Mode” setting
Press the [ESC] key.
9
10
11
12
Press the [T] key three times to select “Option Settings 1”.
Press the [ENTER] key.
Press the [T] key three times to select “Eco Mode”.
Use the [W] and [X] keys to select “On” or “Off”.
13
14
After you are finished, press the [MENU] key to exit the setup menu.
Password Protecting the Projector
The password feature lets you keep unauthorized individuals from using the projector. You
can specify whether password input is required whenever you turn on the projector, and you
can specify and change the password as required. Use the setup menu “Option Settings 1
J Power On Password” setting to configure power on password settings.
Inputting a Password
The password of your projector is not really a “word” made up of letters, but rather a
sequence of remote controller key inputs. The following is the 8-key sequence that
represents the initial factory default password.
[INPUT][AUTO][BLANK][FREEZE][S][T][W][X]
Using the Password Feature
Note the following precautions whenever you use the password feature.
• The password feature protects against unauthorized use of the projector. Note that it is
not an anti-theft measure.
• You will need to enter the initial factory default password the first time you use the
projector after turning on the password feature. Change the initial factory default
password to a different one of your choice as soon as possible after turning on the
password feature.
• Remember that password operations are always performed using the remote controller,
so you should take care not to lose or misplace the remote controller.
• Also note that you will not be able to input the password if the remote controller battery
is dead. Replace the remote control battery as soon as possible after it starts to go
low.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
If you forget your password...
You will not be able to use the projector if you forget the password for some reason. If
you forget the password, you will need to bring the following two items to your CASIO
distributor to have the password cleared. Note that you will be charged to have the
password cleared.
1. Personal identification (original or copy of you driver’s license, employee I.D., etc.)
2. Projector unit
Note that your CASIO distributor will not be able to clear the password of your projector
unless you bring both of the items listed above.
Also, keep the projector’s warranty in a safe place.
Important!
Having your password cleared using the procedure described above will return all of the
settings of your projector, except for the lamp time, to their initial factory defaults.
Keep a written record of your password!
You will not be able to use the projector if you forget its password. We strongly suggest
that you keep a written or other type of record of the password so you can look it up
when necessary.
To change the password
Press the [MENU] key to display the setup menu.
1
2
3
Use the [T] key to select “Option Settings 1”, and then press the [ENTER] key.
Use the [T] key to select “Power On Password”, and then press the [ENTER]
key.
z This will display a dialog box prompting you to enter the current password.
Enter the current password.
z If the projector is still protected by the factory default password, perform the key
4
operation shown below to enter it.
[INPUT][AUTO][BLANK][FREEZE][S][T][W][X]
After entering the current password, press the [ENTER] key.
z This displays the Power On Password setting screen.
5
Use the [T] key to select “Change Password”, and then press the [ENTER] key.
z This will display a dialog box prompting you to enter the new password.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Enter a key sequence up to eight key operations long.
z You can use any of the following keys as part of your password key sequence.
7
[INPUT], [AUTO], [BLANK], [FREEZE], [COLOR MODE], [D-ZOOM +],
[D-ZOOM –], [KEYSTONE +], [KEYSTONE –], [MENU], [POINTER], [ ], [ ], [ ], [S],
U
ꢀ
[T], [W], [X], [FUNC]
After entering the new password, press the [ENTER] key.
z This will display a dialog box prompting you to enter the same password again.
8
9
Re-enter the same password key sequence you entered in step 7 and then press
[ENTER].
z The message “Your new password has been registered.” indicates that the password has
been changed. Press the [ESC] key.
z If the password you entered in this step is different from the one you entered in step 7,
the message “The password you input is wrong.” appears. Press the [ESC] key to return
to step 7.
After you are finished, press the [MENU] key to exit the setup menu.
10
To turn password protection on and off
Display the Power On Password setting screen by performing steps 1 through 5
z At this time, make sure that “Power On Password” is selected on the Power On
1
Password setting screen.
Use the [W] and [X] keys to select “On” or “Off”.
z Changing the power on password setting from “On” to “Off” causes the confirmation
2
dialog box shown below to appear.
Press the [ENTER] key to confirm that you want to turn on power on password
protection, or [ESC] to exit the dialog box without doing anything.
After you are finished, press the [MENU] key to exit the setup menu.
3
Entering the Password when Turning On the Projector
When you turn on the projector while password protection is turned on will cause a
password input dialog box to appear on the projection screen. All projector operations will
be accessible to you after you input the correct password and press the [ENTER] key.
Note
You can perform the projection size adjustment operation ([ZOOM +] / [ZOOM –] keys),
focus operation ([FOCUS S] / [FOCUS T] keys), and power off operation ([
] key)
while the password input dialog box is on the projection screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Restoring Projector Settings to Their Initial Factory
Defaults
You can use the procedures in this section to restore all of the settings on a particular main
menu or all of the settings on the setup menu to their initial factory defaults.
To restore all settings on a particular main menu to their initial factory
defaults
Press the [MENU] key to display the setup menu.
1
2
Use the [T] and [S] keys to select the main menu whose settings you want to
restore to their initial factory defaults.
z You can select Image Adjustment, Screen Settings, Input Settings, Option Settings 1, or
Option Settings 2.
Press the [ENTER] key.
3
4
5
Use the [T] key to select “Restore Menu Defaults”.
Press the [ENTER] key.
z This will display a confirmation screen like the screen shown below.
Use the [S] key to select “Yes”.
6
7
To restore the settings of the main menu to their initial defaults, press the
[ENTER] key.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
After you are finished, press the [MENU] key to exit the setup menu.
8
Note
z The language setting and the password are not returned to their initial factory defaults
if you select Option Settings 1 in step 3.
z For details about how the above procedure initializes settings, see the explanations of
the settings under “Setup Menu Contents” on page 17.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
To restore all settings on the setup menu to their initial factory defaults
Press the [MENU] key to display the setup menu.
1
2
Use the [T] key to select “Restore All Defaults”, and then press the [ENTER]
key.
z This displays a confirmation message asking if you want to initialize all settings.
Use the [S] key to select “Yes”.
3
4
To restore all settings on the setup menu to their initial defaults, press the
[ENTER] key.
z This will restore all of the settings to their initial factory defaults, except for the
Language, Lamp Time, and password settings.
z To exit the operation without doing anything, press [ESC] instead of [ENTER].
After you are finished, press the [MENU] key to exit the setup menu.
5
Setup Menu Contents
This section contains tables that provide detailed explanations of all of the items included on
the setup menu. The following describes the type of information that appears in each of the
columns of the tables.
Setting Name
This column shows the names of the settings as they appear on the sub-menu.
Input
This column shows the input source for which each setting is supported.
Input source names are abbreviated as R (RGB input), C (component video input), V (video
input), and U (USB input, XJ-S35 only). The letter N indicates that the setting can be
configured while there is no input signal.
Setting Unit
The setting unit indicates how a setting is stored.
“Source Specific” in this column indicates that separate settings can be stored for each
individual input source. For example, you could store an “Image Adjustment J Brightness”
setting of –1 for RGB input and a setting of +1 for VIDEO input.
“Single” in this column indicates that a single setting is stored and applied, regardless of the
input source.
Description
This column provides details about the setting item and how to select it. The initial default
setting is indicated by an asterisk (*).
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Image Adjustment Main Menu
Setting
Unit
Setting Name
Input
Description
Brightness
RCVU
Source
Specific
Use this sub-menu to adjust the brightness of the
projected image. A larger value produces a brighter
image.
Contrast
RCVU
RCV
Source
Specific
Use this sub-menu to adjust the contrast of the projected
image. A larger value produces a stronger contrast.
Sharpness
Source
Specific
Use this sub-menu to adjust the sharpness of the outlines
in the projected image. A larger value makes the image
sharper, while a smaller value makes it softer.
Saturation
Tint
RCV
RCV
Source
Specific
Use this sub-menu to adjust the color saturation of the
projected image. A larger value increases color saturation.
Source
Specific
Use this sub-menu to adjust the tint of the projected
image. A larger value makes the overall image more
bluish, while a smaller value makes the overall image
more reddish. This setting is supported only when the
signal is NTSC or NTSC4.43.
Color Mode
RCVU
Source
Specific
You can select from among five different color mode
settings to optimize the projected image in accordance
with image contents and projection conditions.
Presentation*:
Use this setting for standard presentations in a well-lit
area. This is the initial default setting when the input
source is either RGB or USB.
Standard:
Use this setting when you want to highlight the colors of
your presentation.
Graphics:
Use this setting when you want photographs and graphics
to appear natural.
Theater*:
Use this setting to bring out the dark portions of your
images. This is the initial default setting when the input
source is either component video or video.
Blackboard:
Use this setting for easy viewing when projecting onto a
blackboard.
Color Balance
RCVU
Source
Specific
This sub-menu lets you adjust the color balance of the
projected image. Color balance lets you select either
“Color Temperature” or “Color” (for individual adjustment of
red, green and blue) as the adjustment method.
Color Temperature:
Select this option when you want to adjust the color
temperature. Selecting “LO” gives whites a reddish cast,
while “HI” gives them a bluish cast. Selecting “NORM*”
sets a medium setting between the two colors.
Color:
Select this option when you want to individually adjust the
intensity of red, green, and blue. For all of the colors, a
larger value makes the color stronger.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Setting
Unit
Setting Name
Input
Description
Vertical
Position
RCV
Signal
Specific
Use this sub-menu to adjust the vertical position of the
input source image within the projection area.
Horizontal
Position
RCV
R
Signal
Specific
Use this sub-menu to adjust the horizontal position of the
input source image within the projection area.
Frequency
Signal
Specific
When vertical bands appear in the projected image while
RGB is selected as the input source, it means that the
frequency setting is not correct. When this happens, use
this setting to adjust the frequency manually.
Important!
If, for some reason, your manual frequency settings
cause the image input from the computer to
disappear from the projection, you can press the
[AUTO] key to perform an auto adjust operation,
which should cause the image to appear.
Phase
R
Signal
Specific
When there is flickering in the projected image while RGB
is selected as the input source, it means that the phase
setting is not correct. When this happens, use this setting
to adjust the phase manually.
Video Mode
RCV
Source
Specific
This setting is valid when VIDEO is selected as the input
source. Use it to select a mode that is optimized for
movies or still images.
Normal*:
Optimized for movies.
Still Image:
Optimized for still images. In particular, this setting
should be used when projecting still images from a
digital camera connected to the projector’s VIDEO
terminal.
Restore Menu
Defaults
RCVU
Source
Specific
Use this sub-menu to return all of the sub-menu items on
the Image Adjustment main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z “Image Adjustment” main menu “Vertical Position”,
“Horizontal Position”, “Frequency”, and “Phase” defaults
can be restored for the current signal type (XGA/60Hz,
SXGA/60Hz,etc.) only.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
About the “Signal Specific” Setting Unit
For the items that have “Signal Specific” in the “Setting Unit” column of the above table,
the setting is saved for the specific type of signal (XGA/60Hz, SXGA/60Hz, etc.) that is
being input when the setting is performed, and not for a specific input source.
Screen Settings Main Menu
Setting
Unit
Setting Name
Input
Description
Keystone
Correction
RCVUN
Single
Use this sub-menu to correct vertical keystoning of the
projected image.
Aspect Ratio
RCV
Source
Specific
Use this sub-menu to select one of the following aspect
ratios for the projected image.
4:3*:
This setting specifies a 4:3 aspect ratio, which is the
same as a standard television.
16:9:
This setting specifies a 16:9 aspect ratio, which is the
same as a movie screen, high-definition TV, etc. Using
this setting when the input source image is a 16:9 image
that has been squeezed to a 4:3 image causes the
image to be projected with its normal 16:9 aspect ratio.
Note
When the input source is a component signal with
an aspect ratio of 16:9, the aspect ratio switches
automatically to 16:9. When this happens, the
aspect ratio cannot be changed using this setting.
Important!
Note that enlarging or reducing the size of an
image for commercial purposes or public
presentation may infringe on the legally protected
copyright of the copyright holder of the original
material.
Download from Www.Somanuals.com. All Manuals Search And Download.
20
Setting
Unit
Setting Name
Input
Description
Projection
Mode
RCVUN
Single
Use this sub-menu to specify whether projection will be
from the front of the screen or the back of the screen.
*:
Select this option when projecting from the front of the
screen.
:
Select this option when projecting from the back of the
screen.
:
Select this option to flip the back-projected image
vertically.
:
Select this option to flip the image vertically.
Startup Screen
RCVUN
Single
Use this sub-menu to specify whether or not a startup
screen should be projected whenever the projector is
turned on.
Logo:
Select this option to project the projector’s built-in logo
screen at startup.
None*:
Select this option when you do not want to project a
startup screen.
No Signal
Screen
RCVUN
Single
Use this sub-menu to specify what should be projected
when there is no input signal to the projector.
Blue*:
Select this option to project a blue screen.
Black:
Select this option to project a black screen.
Logo:
Select this option to project the projector’s built-in logo
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Setting
Unit
Setting Name
Input
Description
Blank Screen
RCVUN
Single
Use this sub-menu to specify what should be projected
after the [BLANK] key is pressed.
Blue:
Select this option to project a blue screen.
Black*:
Select this option to project a black screen.
Logo:
Select this option to project the projector’s built-in logo
screen.
Restore Menu
Defaults
RCVUN
Source
Specific
Use this sub-menu to return all of the sub-menu items on
the Screen Settings main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z Note that the “Keystone Correction”, “Projection Mode”,
“Startup Screen”, “No Signal Screen”, and “Blank
Screen” settings are always returned to their initial
defaults, regardless of the currently selected input
source.
Download from Www.Somanuals.com. All Manuals Search And Download.
22
Input Settings Main Menu
Setting
Unit
Setting Name
Input
Description
RGB Input
RCUVN
Single
Use this sub-menu to specify manually the type of signal
being input from the projector’s RGB input terminal.
Auto*:
Automatically detects the signal being input from the RGB
input terminal and configures the appropriate input
protocol.
RGB:
Select this option when a computer is connected to the
RGB input terminal. For details about connecting a
computer, see “Connecting a Computer to the Projector”
in the “User’s Guide (Basic Operation)”.
Component:
Select this setting when the projector’s RGB input terminal
is connected to the component video output terminal of a
video device using an optionally available YK-3 component
video cable. For information about connection, see
Video Signal
RCVUN
Single
Use this sub-menu to specify manually the type of signal
being input from the projector’s VIDEO input terminal.
Auto*:
Select this setting to have the projector switch the video
signal system automatically in accordance with the input
signal from the video device that is connected to the
VIDEO input terminal.
NTSC / NTSC4.43 / PAL / PAL-M / PAL-N / PAL60 /
SECAM:
Each setting selects the applicable video system. Use
these settings when you want to specify only one specific
video signal for the VIDEO input terminal.
Signal Name
Indicator
RCVUN
Single
Use this sub-menu to specify whether or not the name of
the currently selected signal source should be displayed in
the projected image.
On*:
Select this option to turn on display of the name of the
currently selected signal source in the projected image.
Off:
Select this option to turn off display of the signal source
name.
Restore Menu
Defaults
RCVUN
Source
Specific
Use this sub-menu to return all of the sub-menu items on
the Input Settings main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z Note that the “Signal Name Indicator” setting is always
returned to its initial default, regardless of the currently
selected input source.
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Option Settings 1 Main Menu
Setting
Unit
Setting Name
Input
Description
Menu Position
RCVUN
Single
Use this sub-menu to specify the display position of the
setup menu as either the center or the left side of the
screen.
*:
Select this option to display the setup menu in the center
of the screen.
:
Select this option to display the setup menu on the upper
left corner of the screen.
Auto Keystone
Correction
RCVUN
RCVUN
Single
Single
Use this sub-menu to turn auto keystone correction on or
off.
On*:
Select this option to turn on auto keystone correction.
Off:
Select this option to turn off auto keystone correction.
Auto Adjust
Use this sub-menu to specify whether or not auto adjust
should be performed when RGB is selected as the input
source.
On*:
Select this option to turn on auto adjust.
Off:
Select this option to turn off auto adjust.
Eco Mode
RCVUN
RCVUN
RCVUN
Single
Single
Single
Use this sub-menu to turn the Eco Mode on or off.
On:
Select this option to reduce lamp brightness and save
power. This setting also reduces the speed of the
projector’s cooling fan, which reduces operation noise.
Off:
Select this option to project at maximum brightness.
Auto Power
Off
Use this sub-menu to turn Auto Power Off on or off. See
“Turning Off the Projector” in the “User’s Guide (Basic
Operation)” for more information.
On*:
Select this option to turn on Auto Power Off.
Off:
Select this option to turn off Auto Power Off.
Power On
Password
You can configure the projector to require input of a
password before operation is enabled. For details, see
Download from Www.Somanuals.com. All Manuals Search And Download.
24
Setting
Unit
Setting Name
Input
Description
Direct Power
On
RCVUN
Single
Use this sub-menu to turn Direct Power On on or off.
See “Direct Power On” in the “User’s Guide (Basic
Operation)” for more information.
On:
Select this option to turn on Direct Power On.
Off*:
Select this option to turn off Direct Power On.
Important!
While Direct Power On is enabled, the projector
will turn off automatically if no key operation is
performed and no signal input is received within
about 10 minutes after it is turned on. This is true
regardless of the current Auto Power Off setting.
Language
RCVUN
RCVUN
Single
Single
Use this sub-menu to specify the language to use for
messages, setup menus, etc.
English / French / German / Italian / Spanish / Swedish /
Chinese (Simplified) / Chinese (Traditional) / Korean /
Japanese
Restore Menu
Defaults
This sub-menu returns all of the sub-menu items on the
Option Settings 1 main menu to their initial default
settings.
z Restoring menu defaults when there is no input signal
will restore defaults for the currently selected input
source.
z The “Auto Adjust” item is returned to its initial default
only when RGB input is selected for the input source.
All of the other items are returned to their initial
defaults regardless of the currently selected input
source.
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Option Settings 2 Main Menu
Setting
Unit
Setting Name
Input
Description
Zoom Memory
RCVUN
Single
Use this sub-menu to turn zoom memory on or off. Zoom
memory lets you save the zoom setting when the
projector is turned off, so it can be restored automatically
the next time the projector is turned on.
On*:
Select this option when you want to restore the zoom
setting that was in effect when the projector was last
turned off, whenever it is turned on.
Off:
Select this option when you want the image to be
projected at its maximum size whenever you turn on the
projector.
Pointer
RCVUN
RCVUN
Single
Single
Use this sub-menu to specify the type of pointer that
appears first when you press the [POINTER] key.
Arrow 1 / Arrow 2 / Bar 1 / Bar 2 / Oval 1 / Oval 2 /
*
Spot 1 / Spot 2
Plug and Play
(XJ-S35 only)
Use this sub-menu to turn plug-and-play*1 on or off.
On*:
Select this option to turn on plug-and-play. This will allow
the projector detect when an external USB device is
connected and make that device the input source
automatically.
Off:
Select this option to turn off plug-and-play.
Restore Menu
Defaults
RCVUN
Single
This sub-menu returns all of the sub-menu items on the
Option Settings 2 main menu to their initial default
settings.
*1 When plug-and-play is turned on, the XJ-S35 projector will make that device the input
source automatically. For details about plug-and-play, see “USB Function Guide” on the
bundled CD-ROM.
USB Settings Main Menu Items (XJ-S35 Only)
The USB Settings main menu is available only when there is an external device connected
to the USB port of the XJ-S35 model projector. For details, see “USB Function Guide” on
the bundled CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
26
Operational Info Main Menu
Setting
Unit
Setting Name
Input
Description
Lamp Time
RCVUN
Single
This sub-menu item shows the cumulative number of
hours the current lamp has been used to date. Use this
value as a reference when deciding whether or not the
current lamp needs to be replaced. For details about
replacing the lamp, see “Replacing the Lamp” in the
“User’s Guide (Basic Operation)”.
Reset Lamp
Time
RCVUN
Single
Use this submenu item to reset the lamp time to 0 hours
after replacing the lamp. For details about replacing the
lamp and the lamp time reset operation, see “Replacing
the Lamp” in the “User’s Guide (Basic Operation)”.
Input Signal
Signal Name
RCVUN
RCV
Source
Specific
This sub-menu item shows the currently selected input
signal (RGB, Component, or VIDEO). “- - - -” is indicated
here when there is no input signal.
Source
Specific
This sub-menu item shows the signal name of the signal
being input to the projector. For details about signal
Index
RC
R
Source
Specific
This sub-menu item appears only when RGB or
component is the input signal. It shows projector internal
information.
Resolution
Single
This sub-menu item appears only when RGB is the input
signal. It shows the number of vertical pixels of resolution
of the RGB input signal.
Horizontal
Frequency
RCV
RCV
RC
Source
Specific
This sub-menu item shows the horizontal frequency of the
input signal.
Vertical
Frequency
Source
Specific
This sub-menu item shows the vertical frequency of the
input signal.
Scan System
Source
Specific
This sub-menu item appears only when RGB or
component is the input signal, and shows the scanning
frequency of the input signal. The input signal is interlace
or non-interlace for an RGB signal input, and interlace or
progressive for a component signal input.
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Restore All Defaults Main Menu
Setting
Unit
Setting Name
Input
Description
Restore All
Defaults
RCVUN
Single
This sub-menu returns all sub-menu items on all main
menus to their initial default settings. This operation can
be performed regardless of the currently selected input
source and regardless of whether or not a signal is
currently being input. For details about this procedure, see
Unit Operating
Time
RCVUN
Single
This sub-menu item shows the cumulative operating time
of this unit. This time cannot be initialized.
Download from Www.Somanuals.com. All Manuals Search And Download.
28
Appendix
Remote Controller Signal Range
When performing an operation on the remote controller, point it at the remote control signal
receiver on the back or front of the projector. The following illustration shows the range of
the remote controller signal.
30 degrees
max.
30 degrees
max.
5 meters
(16.4 feet) max.
5 meters
(16.4 feet) max.
Front
Back
5 degrees to
30 degrees
30
degrees max.
5 meters
(16.4 feet) max.
5 meters
(16.4 feet) max.
Remote Controller Range
The allowable distance between the remote controller and the projector is less when there
is a sharp angle between the remote controller and the remote control signal receiver.
Important!
To avoid running down the battery, store the remote control unit so its buttons are not
pressed inadvertently.
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Projection Distance and Screen Size
Screen Size 200
5.7 m to 11.3 m
(18.70 feet to 37.07 feet)
Screen Size 40
1.1 m to 2.2 m
(3.61 feet to 7.22 feet)
Screen Size 60
1.7 m to 3.4 m
(5.58 feet to
11.15 feet)
12 m
(39.37 feet)
10 m
(32.81 feet)
8 m
(26.25 feet)
6 m
(19.69 feet)
4 m
(13.12 feet)
2 m
(6.56 feet)
0
The following table shows the relationship between the distance and projected image size.
Projection Size
Approximate Projection Distance
Minimum
Maximum
Maximum
Distance
(feet)
Diagonal
(cm)
Minimum
Distance (m)
Screen Size
40
Distance
Distance (m)
(feet)
102
152
203
254
381
508
1.1
1.7
2.3
2.8
4.3
5.7
2.2
3.4
3.61
5.58
7.22
60
80
11.15
14.76
18.37
27.89
37.07
4.5
7.55
100
150
200
5.6
9.19
8.5
14.11
18.70
11.3
Important!
Note that the distances provided above are for reference only.
Download from Www.Somanuals.com. All Manuals Search And Download.
30
Connecting to a Component Video Output Device
Some video devices are equipped with a component video output terminal. You can use an
optionally available component video cable (YK-3) to connect the RGB input terminal of the
projector to the component video output terminal of a video device.
Important!
Always turn off the projector and the video device before connecting them.
Projector
RGB input terminal
To component video
output terminal
Optional component video
cable (YK-3)
Video device
z Component video output terminals come in 3-terminal sets: Y·Cb·Cr or Y·Pb·Pr. Be sure to
match the colors of the plugs on the optional YK-3 component video cable with the colors
of the terminals (Green: Y; Blue: Cb/Pb; Red: Cr/Pr).
z You can use the optional YK-3 component video cable to connect to pin jack (RCA) type
component video output terminals. The projector does not support connection to any other
type of terminal.
z Note that connection only to an analog component video output terminal is supported.
Connection to a digital output terminal is not supported.
Download from Www.Somanuals.com. All Manuals Search And Download.
31
Full-screen Display of an RGB Image
The projector outputs images using XGA (1024 pixels × 768 pixels) video resolution. When
the input signal from the computer connected to the projector is not an XGA signal,
“Resize Image To Fit” automatically enlarges or reduces the image so it matches the
projector’s video resolution and fills the entire screen. The following shows how different
input signals from a computer are adjusted during projection.
Input Signal Example
Projected Image
×
800 600
×
1024 768
×
1280 1024
When the input signal has a resolution of 1280
× 1024 (aspect ratio: 5:4), the original image is
compressed so it conforms to the projection
resolution of 1024 × 768 (aspect ratio: 4:3).
Because of this, the projected image may
appear slightly wider horizontally than the
original image.
Download from Www.Somanuals.com. All Manuals Search And Download.
32
Reattaching the Lens Cover
Use the following procedure to replace the lens cover if it should accidentally become
detached from the projector.
Insert the nub ( ) of the left tab of the lens cover into the depression ( ) of the
tab under the lens.
z When performing the above step, make sure that the lens cover is open to 90 degrees in
3
1
1
relation to the front of the Data Projector.
Keeping the left nub ( ) in the left depression ( ), gently press the lens cover
3
1
2
towards the right as you insert the nub ( ) of the right lens cover tab into the
4
depression ( ) of the right tab under the lens.
2
z Do not apply undue force to the lens cover when performing the above step. Pressing too
strongly can damage the tabs of the lens cover.
Press here with a pen or
similarly pointed object as
you slide the cover into
place.
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Supported Signals
RGB Signal
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Signal Name
640 × 480/60
Resolution
640 × 480
VESA
31.5
60
640 × 480/72
640 × 480/75
640 × 480/85
800 × 600/56
800 × 600/60
800 × 600/72
800 × 600/75
800 × 600/85
1024 × 768/60
1024 × 768/70
1024 × 768/75
1024 × 768/85
1152 × 864/75
1280 × 960/60
1280 × 1024/60
1152 × 864/70
640 × 480
640 × 480
640 × 480
800 × 600
800 × 600
800 × 600
800 × 600
800 × 600
1024 × 768
1024 × 768
1024 × 768
1024 × 768
1152 × 864
1280 × 960
1280 × 1024
1152 × 864
37.9
37.5
43.3
35.2
37.9
48.1
46.9
53.7
48.4
56.5
60.0
68.7
67.5
60.0
64.0
64.0
73
75
85
56
60
72
75
85
60
70
75
85
75
60
60
70
Other
Component Signal
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Signal Name
1080i60
HDTV
SDTV
33.7
60
720p60
576p50
576i50
480p60
480i60
45.0
31.3
16.6
31.5
15.7
60
50
50
60
60
Download from Www.Somanuals.com. All Manuals Search And Download.
34
Video Signal
Horizontal
Frequency (kHz)
Vertical
Frequency (Hz)
Signal Name
NTSC
15.7
60
NTSC4.43
PAL
15.7
15.6
15.7
15.6
15.7
15.6
60
50
60
50
60
50
PAL-M
PAL-N
PAL60
SECAM
* Listing of a device in the above table does not guarantee that you will be able to
display its images correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
35
MA0608-A
Download from Www.Somanuals.com. All Manuals Search And Download.
|