CDA Cooktop RC 9020 User Manual

Tw in cavity  
dual fuel cookers  
RC 9020 ..  
GB  
Users Op era t in g In st ru ct io n s  
In st a lla t io n in st ru ct io n s  
Before operating this cooker,  
please read these instructions carefully  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n t en t s  
Mo d els RC 9 0 2 0 ..  
Page Number  
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4  
Features and technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5  
Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6  
Electronic programmer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
How to use the hob burners . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11  
How to use the multifunction main oven . . . . . . . . . . . . . . . . . . . . . . . . 13  
How to use the conventional oven . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19  
Dos and do nots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22  
Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24  
For the installer  
Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Fitting the adjustable feet and levelling . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Stability bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Provision for ventilation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Gas installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Gas connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37  
Conversion to Natural Gas or to LPG . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Lubrication of the gas taps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42  
Electrical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Appliance servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Guarantee . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
In t ro d u ct io n  
Congratulations on your purchase of this CDA cooker which has been carefully  
designed and produced to give you many years of satisfactory use.  
Before using this appliance it is essential that the following instructions are carefully  
read and fully understood.  
We would emphasise that the installation section must be fully complied with for your  
safety to ensure that you obtain the maximum benefits from your appliance.  
B
Assembling the  
backguard  
Remove the two spacers  
“A” and the screw B”  
from the rear of the cook-  
top.  
Assemble the backguard  
as shown in figure 1 and  
fix it by screwing the cen-  
tral screw B” and the  
spacers A”.  
A
Fig. 1  
Declaration of CE conformity  
This cooker has been designed, constructed and marketed in compliance with:  
- Safety requirements of EU Directive "Gas" 90/396/EEC;  
- Safety requirements of EU Directive "Low Voltage" 2006/95/EC;  
- Protection requirements of EU Directive "EMC" 89/336/EEC;  
- Requirements of EU Directive 93/68/EEC.  
GB  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fea t u res a n d t ech n ica l d a t a  
Gas burners  
1. Auxiliary burner (A)  
2. Semi-rapid burner (SR)  
3. Semi-rapid burner (SR)  
4. Rapid burner (R)  
1,00 kW  
1,75 kW  
1,75 kW  
3,00 kW  
3,50 kW  
5. Triple-ring burner (TR)  
3
5
1
4
2
Conventional  
oven  
Fig. 2  
Multifunction  
oven  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n t ro l p a n el  
Fig. 3  
11  
12  
A
U
T
O
8
7
6
5
4
3
2
1
10  
9
Control panel - Controls description  
1. Front right burner control knob  
2. Rear right burner control knob  
3. Central burner control knob  
4. Rear left burner control knob  
5. Front left burner control knob  
6. Multifunction main oven switch knob  
7. Multifunction main oven thermostat knob  
8. Electronic programmer (main oven only)  
9. Conventional oven thermostat knob  
10.Conventional oven switch knob  
Pilot lamps:  
11. Main oven thermostat indicator light  
12. Conventional oven thermostat indicator light  
Plea se n o t e: This appliance incorporates a safety cooling fan which you will hear  
operating whenever the oven or grill are in use. This fan is to reduce the external  
temperature of the appliance and cool the internal components.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Elect ro n ic p ro g ra m m er (m a in o ven o n ly)  
The electronic programmer is a device that groups together the following functions:  
– 24 hour clock with illuminated display  
Timer (up to 23 hours and 59 minutes)  
– Programme for automatic oven cooking  
– Programme for semi-automatic oven cooking.  
Description of the buttons:  
Automatic cooking taking place  
Timer  
Timer in operation  
Cooking time  
and AUTO - flashing - Programme  
error.  
End of cooking time  
(The time of day lies between the  
calculated cooking start and end  
time).  
Manual position and cancellation  
o f th e in se rte d co o kin g p ro -  
gramme  
N o t e : Se le ct a fu n ctio n b y th e  
respective button and, in 5 seconds, set  
Advancement of the numbers of  
all programs  
the required time with the  
/
Turning back of the numbers of all  
programs and changing the fre-  
quency of the audible signal.  
buttons (one-hand” operation).  
A p o w e r cu t ze ro e s th e clo ck a n d  
cancels the set programmes.  
Description of the lighted symbols:  
AUTO -flashing - Programmer in auto-  
matic position bu t n ot pro-  
grammed  
AUTO - always lighted - Programmer in  
automatic position with pro-  
gramme inserted.  
A
U
T
O
Fig. 4  
Fig. 5  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electronic clock (fig. 5)  
Electronic timer  
The programmer is equipped with an  
electronic clock with lighted numbers  
which indicate hours and minutes.  
The timer programme consists only of a  
b u zze r w h ich ma y b e se t fo r a  
maximum period of 23 hours and 59  
minutes.  
Upon immediate connection of the  
oven or after a blackout, three zeroes  
will flash on the programmer panel.  
To set the hour it is necessary to push  
If the AUTO is flashing push the  
button.  
To set the time, push the  
and the or until you obtain the  
desired time (fig. 7).  
Having finished the setting, the normal  
time will appear on the panel and the  
symbol will appear.  
The countdown will start immediately  
and may be seen at any moment on  
the panel by simply pressing the button  
.
button  
the  
button and then the  
or  
button until you have set the exact  
hour (fig. 5).  
Alternatively, simultaneously push the  
two buttons and at the same  
time push the  
or  
button.  
Note: Setting the clock deletes any  
programme.  
At the end of the time, the  
symbol  
will be switched off and an intermittent  
buzzer will go off; this can be stopped  
by pressing any one of the buttons.  
Normal cooking w ithout  
the use of the  
programmer  
To manually use the oven, that is, without  
the aid of the programmer, it is necessary  
to cancel the flashing AUTO by pushing  
Altering the audible  
signal  
the button  
and the symbol  
(AUTO will be switched off  
will go on - Fig. 6).  
Attention: If the AUTO is not flashing  
(which means a cooking programme has  
already been inserted), by pushing the  
By pressing the  
button you can  
choose from three variations.  
b u tto n  
yo u h a ve ca n ce lle d th e  
programme and switched to manual.  
A
U
T
O
Fig. 6  
Fig. 7  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3.Set the temperature and the cooking  
programme by using the switch and  
thermostat knobs of the oven (see  
specific chapters).  
Automatic oven  
cooking  
To cook food automatically in the oven,  
it is necessary to:  
1.Set the length of the cooking time  
2.Set the end of the cooking time  
3.Set the temperature and the oven  
cooking programme.  
Now the oven is prog rammed and  
everything will work automatically, that  
is the oven will turn on at the right  
moment to end the cooking at the  
established time.  
Th e se o p e ra tio n s a re d o n e in th e  
following way:  
1.Set the length of the cooking time by  
During cooking, the  
on.  
symbol remains  
By pushing the  
button you can see  
the time that remains until the end of  
cooking.  
pushing the  
button to  
button and the  
advance, or to go back  
if you have passed the desired time  
(fig . 8). Th e AUTO a n d th e  
symbol will be on.  
2.Set the end of the cooking time by  
Th e co o kin g p ro g ra mme ma y b e  
cancelled in any moment by pushing  
.
At the end of the cooking time the  
oven will turn off automatically, the  
symbol will turn off, AUTO will flash  
and a buzzer will sound, which can be  
turned off by pushing any of the but-  
tons.  
pressing the  
time already added to the clock time  
will appear), and the button (fig.  
button (the cooking  
9); if you pass the desired time you  
may get back by pushing the  
button.  
Turn the switch and thermostat knobs  
to zero and put the programmer onto  
After this setting, the  
symbol will  
go off. If after this setting, the AUTO  
flashes on the panel and a buzzer  
goes off, it means there was an error  
in the programming.  
In th is ca se , mo d ify th e e n d o f  
cooking time or the cooking time  
itse lf b y fo llo w in g th e a b o ve  
instructions again.  
manualby pressing the  
button.  
At t e n t io n : A power cut makes the  
clock go to zero and cancels the set  
programmes.  
After a power cut three zeroes will flash  
on the panel.  
A
U
T
A
U
T
O
O
Fig. 8  
Fig. 9  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
At the end of cooking, the oven and  
the symbol will turn off, the AUTO  
will flash and a buzzer will sound; that  
can be stopped by pushing any of the  
buttons.  
Turn the switch and thermostat knobs  
to zero and put the programmer onto  
Semi-automatic cooking  
This is used to automatically switch off  
the oven after the desired cooking time  
has elapsed.  
There are two ways to set your oven:  
1. Set the length of the cooking time by  
pushing the  
button to advance, or  
button and the  
to go  
manualby pressing the  
button.  
backwards if you have passed the  
desired time (Fig. 10).  
or  
2. Set the end of the cooking time by  
pushing the  
bu tton to ad van ce, or  
button and the  
to g o  
backwards if you have passed the  
desired time (Fig. 11).  
AUTO and the  
symbol will be  
on.  
Then set the temperature and the  
cooking programme using the oven  
switch and thermostat knobs (see  
specific chapters).  
The oven is switched on and it will  
be switched off automatically at the  
end of the desired time.  
A
U
T
O
Du rin g co o kin g , th e  
re main s o n an d b y p re ssin g th e  
button you can see the time that  
symb o l  
remains till the end of the cooking.  
Th e co o kin g p ro g ramme can be  
cancelled at any moment by pushing  
Fig. 10  
the  
button.  
A
U
T
O
Fig. 11  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ho w t o u se t h e h o b b u rn ers  
Hob burners  
Each hob burner is controlled by a sep-  
arate gas tap operated by a control  
knob (fig. 12) which has 3 positions  
marked on the control panel, these are:  
Symbol : tap closed (burner off)  
Symbol  
: High (maximum)  
Symbol  
: Low (minimum)  
Push in and turn the knob anti-clock-  
wise to the selected position.  
Fig. 12  
To turn the burner off, fully rotate the knob clockwise to the off position: .  
The maximum setting of the control tap is for boiling, the minimum setting is for slow  
cooking and simmering.  
All working positions must be choosen between the maximum and minimum setting,  
never between the maximum setting and the OFF” position.  
Electric ignition  
The sparks generated by the electrodes close to the burners will ignite the choosen  
burner. Whenever the lighting of the burners is difficult due to peculiar conditions of  
the gas features or supply, it is advised to repeat the ignition with the knob on mini-  
mum” position.  
Lighting of the hob burners  
To ignite the burner, the following instructions are to be followed:  
1) Lightly press and turn the knob anti-clockwise, and position the knob indicator to the  
symbol  
printed on the control panel (fig. 12).  
2) Press the knob to operate the electric ignition; or, in the case of a mains failure light  
the burner with a match or lighted taper.  
3) Adjust the burner according to the setting required.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Choice of burner  
The burner must be choosen according to the diameter of the pans and energy  
required.  
Fig. 13  
Burners  
Auxiliary  
Semi-rapid  
Rapid  
Pan diameter  
12 ÷ 14 cm  
16 ÷ 24 cm  
24 ÷ 26 cm  
26 ÷ 28 cm  
max 36 cm  
Triple-ring  
Wok  
do not use pans with concave or convex bases  
Saucepans with handles which are excessively heavy, in relationship to the weight of  
the pan, are safer as they are less likely to tip. Pans which are positioned centrally on  
burners are more stable than those which are offset.  
It is far safer to position the pan handles in such a way that they cannot be accidentally  
knocked.  
When deep fat frying fill the pan only one third full of oil.  
DO NOT cover the pan with a lid and DO NOT leave the pan unattended.  
In the unfortunate event of a fire, leave the pan where it is and turn off all controls.  
Place a damp cloth or correct fitting lid over the pan to smother the flames.  
DO NOT use water on the fire.  
Leave the pan to cool for at least 30 minutes.  
Correct use of triple-ring burner  
The flat-bottomed pans are to be placed directly onto the pan-support.  
To use the WOK you need to place the proper stand in order to avoid any faulty  
operation of the triple-ring burner (Fig. 14a - 14b).  
IMPORTANT:  
The wok pan stand (fig. 14b) MUST BE PLACED ONLY over the pan-rest for the triple-  
ring burner.  
WRONG  
CORRECT  
Fig. 14b  
Fig. 14a  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ho w t o u se t h e Mu lt ifu n ct io n m a in o ven  
General features  
As its name indicates, this is an oven that presents particular features from an opera-  
tional point of view.  
In fact, it is possible to insert 7 different programs to satisfy every cooking need.  
The 7 positions, thermostatically controlled, are obtained by 4 heating elements which  
are:  
Bottom element  
Top element  
– Grill element  
1400 W  
1000 W  
2000 W  
2500 W  
– Circular element  
Note:  
Upon first use, it is advisable to operate the oven for 30 minutes in the position  
and for  
another 30 minutes at the maximum temperature (thermostat knob on position 250) in the  
positions and , to eliminate possible traces of grease on the heating elements.  
Clean the oven and accessories with warm water and washing-up liquid.  
ATTENTION - MOST IMPORTANT  
WARNING:  
Pay special atten tion n ot to touch  
the hot heating element inside the  
oven cavity.  
The door is hot, use the handle.  
Operating principles  
Heating and cooking in the MULTI-FUNCTION oven are obtained in the following  
ways:  
a. by normal convection  
The heat is produced by the upper and lower heating elements.  
b. by forced convection  
A fan sucks in the air contained in the oven muffle, which sends it through the  
circular heating element and then sends it back through the muffle. Before the  
hot air is sucked back again by the fan to repeat the described cycle, it envelops  
the food in the oven, provoking a complete and rapid cooking.  
It is possible to cook several dishes simultaneously.  
c. by semi-forced convection  
The heat produced by the upper and lower heating elements is distributed  
throughout the oven by the fan.  
d. by radiation  
The heat is radiated by the infra red grill element.  
e. by radiation and ventilation  
The irradiated heat from the infra red grill element is distributed throughout the  
oven by the fan.  
f. by ventilation  
The food is defrosted by using the fan only function without heat.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fig. 16  
Fig. 15  
Thermostat knob (Fig. 15)  
This only sets the cooking temperature and does not switch the oven on.  
Rotate clockwise until the required temperature is reached (from 50 to 250°C).  
The light between the thermostat and the function selector will illuminate when the  
oven is switched on and turns off when the oven reaches the correct temperature.  
The light will cycle on and off during cooking in line with the oven temperature.  
Function selector knob (Fig. 16)  
Rotate the knob clockwise to set the oven for one of the following functions.  
Oven light  
By setting the knob to this position, only the oven light comes on.  
It remains on in all the cooking modes.  
Traditional convection cooking  
The upper and lower heating elements come on. The heat is dispersed by natural con-  
vection and the temperature must be set to between 50° and 250°C via the thermo-  
stat knob.  
The oven must be preheated before cooking.  
Recommended for:  
Food that requires the same degree of cooking both inside and out, for example  
roasts, spare pork ribs, meringues etc.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grilling  
The infrared grill element comes on. The heat is dispersed by radiation.  
Use with the oven door closed and the thermostat knob to position 225°C for max  
15 minutes, then to position 175°C.  
For cooking hints, see the chapter USE OF THE GRILL”.  
Recommended for:  
Intense grilling, browning, cooking au gratin and toasting etc.  
It is recommended that you do not grill for longer than 30 minutes at any  
one time.  
Caution: the oven door becomes very hot during operation. Keep children  
w ell out of reach.  
Defrosting frozen foods  
Only the oven fan comes on. Use with the thermostat knob set to ” - other positions  
have no effect. The food is thawed by ventilation without heating.  
Recommended for:  
Quick thawing of frozen foods; one kg requires approximately 1 hour.  
Thawing times vary according to the quantity and type of food to be thawed.  
Hot air cooking  
The circular element and fan come on. The heat is dispersed by forced convection and  
the temperature can be regulated to between 50° and 250°C via the thermostat knob.  
The oven does not require preheating.  
Recommended for:  
Food which has to be well-cooked outside and soft or rosy inside, for example  
lasagne, lamb, roast beef, whole fish etc.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ventilated grill cooking  
The infrared grill element and the fan come on. The heat is dispersed mainly by radia-  
tion and the fan then distributes it all over the oven.  
Use w ith the door closed. The temperature can be regulated via the thermostat  
knob to between 50° and 175° max.  
The oven must be preheated for approximately 5 minutes. For cooking hints, see the  
chapter GRILLING AND AU GRATIN.  
Recommended for:  
Grilling where quick browning on the outside is required to keep the juices in.  
For example: veal steaks, chops, hamburgers etc.  
It is recommended that you do not grill for longer than 30 minutes at any  
one time.  
Caution: the oven door becomes very hot during operation. Keep children  
w ell out of reach.  
Maintaining temperature after cooking or slow ly  
heating foods  
The upper heating element, the circular element and the fan come on.  
The heat is dispersed by forced convection with greater intensity in the upper part.  
The temperature can be set to between 50° and 150°C via the thermostat knob.  
Recommended for:  
Keeping food warm after any type of cooking. Slow heating of cooked food.  
Convection cooking w ith ventilation  
The upper and lower heating elements come on and the fan.  
The heat coming from above and below is dispersed by convection with ventilation.  
The temperature can be set to between 50° and 250°C via the thermostat knob.  
Recommended for:  
Voluminous dishes and large quantities which require the same degree of cooking  
both inside and out, for example rolled roasts, turkey, roast legs, cakes etc.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co o kin g a d vice  
Sterilization  
Sterilization of foods to be conserved, in full and hermetically sealed jars, is done in the  
following way:  
a. Set the switch to position  
.
b. Set the thermostat knob to position 185 °C and preheat the oven.  
c. Fill the dripping pan with hot water.  
d. Set the jars onto the dripping pan making sure they do not touch each other and  
the door and set the thermostat knob to position 135 °C.  
When sterilization has begun, that is, when the contents of the jars start to bubble,  
turn off the oven and let cool.  
Regeneration  
Set the switch to position  
and the thermostat knob to position 150° C.  
Bread becomes fragrant again if wet with a few drops of water and put into the oven  
for about 10 minutes at the highest temperature.  
Simultaneous cooking of different foods  
The MULTI-FUNCTION oven set on position  
and  
gives a simultaneous heteroge-  
neous cooking of different foods. Different foods such as fish, cake and meat can be  
cooked together without mixing the smells and flavors together.  
This is possible since the fats and vapors are oxidized while passing through the electri-  
cal element and therefore are not deposited onto the foods.  
The only precaution to follow are:  
The cooking temperatures of the different foods must be as close to as possible, with  
a maximum difference of 20° - 25 °C.  
The introduction of the different dishes in the oven must be done at different times in  
relation to the cooking times of each one.  
The time and energy saved with this type of cooking is obvious.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Grilling and au gratin”  
Grilling may be done without the roasting jack on position  
the hot air completely envelops the food that is to be cooked.  
of the switch, because  
Set the thermostat to position 175 °C and after having preheated the oven, simply  
place the food on the rack.  
Close the door and let the oven operate with the thermostat on position 175 °C, until  
grilling is done.  
Adding a few dabs of butter before the end of the cooking time gives the golden au  
gratin” effect.  
It is recommended that you do not grill for longer than 30 minutes at any  
one time.  
Caution: the oven door becomes very hot during operation. Keep children  
w ell out of reach.  
Roasting  
To obtain classical roasting, it is necessary to remember:  
– that it is advisable to maintain a temperature between 180° and 200 °C.  
– that the cooking time depends on the quantity and the type of foods.  
Use of the grill  
Preheat the oven for about 5 minutes.  
Introduce the food to be cooked, positioning the rack as close to the grill as possible.  
The dripping pan should be placed under the rack to catch the cooking juices and  
fats.  
Grillin g w it h t h e o ven d o o r clo sed .  
Do not grill for longer than 30 minutes at any one time.  
Caution: the oven door becomes very hot during operation. Keep children  
w ell out of reach.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ho w t o u se t h e Co n ven t io n a l o ven  
General features  
As its name indicates, this is an oven that presents particular features from an opera-  
tional point of view.  
The conventional oven is provided with 3 heating elements which are:  
Bottom element  
Top element  
– Grill element  
800 W  
700 W  
1450 W  
Note:  
Upon first use, it is advisable to operate the oven at the maximum temperature (ther-  
mostat knob on position 250) for 60 minutes in the position  
and for another 15  
minutes in the position  
ments.  
to eliminate possible traces of grease on the heating ele-  
ATTENTION - MOST IMPORTANT  
WARNING:  
Pay special atten tion n ot to touch  
the hot heating element inside the  
oven cavity.  
The door is hot, use the handle.  
Thermostat knob (Fig. 18)  
This only sets the cooking temperature and does not switch the oven on.  
Rotate clockwise until the required temperature is reached (from 50 to 250°C).  
The light between the thermostat and the function selector will illuminate when the  
oven is switched on and turns off when the oven reaches the correct temperature.  
The light will cycle on and off during cooking in line with the oven temperature.  
Fig. 17  
Fig. 18  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Function selector knob (Fig. 17)  
Rotate the knob clockwise to set the oven for one of the following functions.  
Oven light  
By setting the knob to this position, only the oven light comes on.  
It remains on in all the cooking modes.  
Traditional convection cooking  
The upper and lower heating elements come on.  
The heat is dispersed by natural convection and the temperature must be set to  
between 50° and 250°C via the thermostat knob. The oven must be preheated before  
cooking.  
In the  
position the rotisserie motor come on for cooking with the rotisserie.  
Recommended for:  
Food that requires the same degree of cooking both inside and out, for example  
roasts, spare pork ribs, meringues etc.  
Traditional grilling  
The infrared electrical resistance comes on.  
The heat is diffused by radiation.  
Use with the oven door closed and the thermostat knob to position 225°C for 15  
minutes then to 175°C.  
In the  
position the rotisserie motor come on for cooking with the rotisserie.  
For cooking hints, see the chapter USE OF THE GRILL”.  
Recommended for:  
Intense grilling, browning, cooking au gratin and toasting etc.  
It is recommended that you do not grill for longer than 30 minutes at any  
one time.  
Attention: the oven door becomes very hot during operation.  
Keep children aw ay.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use of the grill  
Switch the grill on, setting the two knobs:  
– Function selector to  
or  
position.  
Thermostat selector to position 225°C for 15 minutes then to 175°C.  
Leave to warm up for approximately 5 minutes with the door clo sed .  
Place the food inside positioning the rack as near as possible to the grill.  
Insert the drip pan under the rack to collect the cooking juices.  
Grilling with the oven door closed and do not for longer than 30 minutes at any  
one time.  
Attention: the oven door becomes very hot during operation.  
Keep children aw ay.  
Rotisserie  
The oven is equipped w ith a rotisserie.  
This device is made up of:  
– an electrical motor mounted on the rear part of the oven  
– a stainless steel rod, equipped with a detachable athermic grip and 2 recordable forks  
– a rod support to be inserted into the central rack holders of the oven.  
Use of the rotisserie  
Insert the dripping pan into the lowest rack holders of the oven and insert the rod  
support into the intermediate rack holders.  
– Put the meat to be cooked onto the rod, being careful to secure it in the center with  
the special forks.  
Insert the rod into the motor opening and rest it onto the support of the spit collar;  
then remove the grip by turning it to the left.  
The rotation direction of the rotisserie  
can be either clockwise or counter-clock-  
wise.  
Fig. 19  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Do s a n d d o n o t s  
Dos and do nots  
• Do always grill with the oven door closed.  
• Do read the user instructions carefully before using the cooker for first time.  
• Do allow the oven to heat for one and a half hours, before using for the first time, in  
order to expel any smell from the new oven insulation, without the introduction of  
food.  
• Do clean your oven regularly.  
• Do remove spills as soon as they occur.  
• Do always use oven gloves when removing food shelves and trays from the oven.  
• Do not allow children near the cooker when in use.  
• Do not allow fat or oils to build up in the oven trays, or oven base.  
• Do not place cooking utensils or plates directly onto the oven base.  
• Do not grill food containing fat without using the grid.  
• Do not cover the grilling grid with aluminium-foil.  
• Do not use the oven tray for roasting.  
• Do not place hot enamel parts in water. Leave them to cool first.  
• Do not allow vinegar, coffee, milk, saltwater, lemon or tomato juice to remain in  
contact with enamel parts (inside the oven and on the oven tray).  
• Do not use abrasive cleaners or powders that will scratch the surface of the stainless  
steel and the enamel.  
• Do not attempt to repair the internal workings of your cooker.  
• Do remove the protective film before the first use.  
• Fire risk! Do not store flammable material in the oven and in the storage  
compartment.  
For your safety  
The product should only be used for its intended purpose which is for the cooking of  
domestic foodstuffs.  
Under no circumstances should any external covers be removed for servicing or main-  
tenance except by suitably qualified personnel.  
Attention  
Th e applian ce g ets very h ot, main ly aroun d th e cookin g areas. It is very  
important that children are not left alone in the kitchen w hen you are cook-  
ing.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Im p o rt a n t n o t es  
Installation, and any demonstration, information or adjustments are not included in  
the warranty.  
The cooker must be installed by a qualified person in accordance with the relevant  
Standards.  
In the UK C.O.R.G.I registered installers are authorised to undertake the installation and  
service work in compliance with the applicable regulations.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ca re a n d m a in t en a n ce  
Important:  
As a safety measure, before you start cleaning the cooker be sure to disconnect it from  
the mains supply.  
Do not use a steam cleaner because the moisture can get into the appliance  
thus make it unsafe.  
Th e use of suitable protective cloth in g/gloves is recommen ded w h en h an -  
dling or cleaning of this appliance.  
WARNING  
When correctly installed, your product meets all safety requirements laid down for this  
type of product category.  
However special care should be taken around the rear or the underneath of the appli-  
ance as these areas are not designed or intended to be touched and may contain  
sharp or rough edges, that may cause injury.  
Flexible tube  
From time to time, check the flexible tube connecting the gas supply to the cooker.  
It must be always in perfect condition; in case of damage arrange for it to be replaced  
by a C.O.R.G.I. registered installer.  
Gas taps  
If a tap becomes stiff, do not force; contact your local Service Centre.  
Cleaning the hob  
Spillage on the hob can usually be removed by a damp soapy cloth. More obstinate  
stains can be removed by rubbing gently with a soapy nylon (non metal) scouring pad  
or mild household cleaner.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enamelled parts  
All the enamelled parts must be cleaned with a sponge and soapy water only or other  
non-abrasive products.  
Dry preferably with a microfibre or soft cloth.  
Stainless steel, aluminium, painted parts and silk-  
screen printed surfaces  
Clean using an appropriate product. Always dry thoroughly.  
Stainless steel surfaces: can be cleaned with an appropriate stainless steel cleaner.  
IMPORTANT: these parts must be cleaned very carefully to avoid scratching and abra-  
sion. You are advised to use a soft cloth and neutral soap.  
CAUTION: Do not use abrasive substances or non-neutral detergents as these w ill  
irreparably damage the surface.  
Changing the oven light  
1. Disconnect the electrical power supply (for example, by switching off the main  
power switch).  
2. Unscrew the light cover  
3. Fit a new bulb.  
4. Refit the cover.  
Note:  
Use only bulbs designed to resist up to 300°C with the following characteristics: 230 V,  
type E14 and same power (check watt power as stamped in the bulb itself) of the  
replaced bulb  
.
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Burners  
They can be removed and washed only  
with soapy water.  
Detergents can be used but must not be  
abrasive or corrosive.  
C
Do not use abrasive sponges or pads.  
Do not put in dishwasher.  
After each cleaning, make sure that the  
burner-caps, as well as the burners, have  
been well wiped off and CO RRECTLY  
POSITIONED.  
It is essential to check that the burner  
flame distributor F and the cap C has  
been correctly positioned (see fig. 20) -  
failure to do so can cause serious prob-  
lems.  
F
S
Check that the electrode S” (fig. 20) is  
always clean to ensure trouble-free spark-  
ing.  
Fig. 20  
Note:  
The electrode S” must be very carefully cleaned.  
To avoid damage to the electric ignition do not use it w hen the burners are not  
in place.  
Triple ring burner  
The triple ring burner must be correctly positioned (see figs. 21-22); the burner rib  
must be enter in their logement as shown by the arrow.  
The burner correctly positioned must not rotate (fig. 22).  
Then position the cap A and the ring B (fig. 22).  
B
A
Fig. 21  
26  
Fig. 22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Removal of the inner glass door panel  
The inner glass door panel can easily be removed for cleaning by unscrewing  
the four screws (fig. 23).  
When re-assembly ensure that the inner glass is correctly positioned and do not  
over tighten the screws.  
Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven  
door glass since they can scratch the surface, w hich may result in shattering  
of the glass.  
Fig. 23  
Storage compartment  
The storage compartment is accessible through the pivoting panel.  
Attention: Do not store flammable material in the ovens, or the storage com-  
partment.  
Fig. 24  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inside of oven  
The oven should always be cleaned  
after use when it has cooled down.  
The cavity should be cleaned using a  
mild d eterg en t solution an d w arm  
w ater. Suitable proprietary chemical  
cleaners may be used after first consult-  
ing with the manufacturers recommen-  
dations and testing a small sample of the  
oven cavity. Abrasive cleaning agents or  
scouring pads/cloths should not be used  
on the cavity surface.  
NOTE: The manufacturers of this appli-  
ance will accept no responsibility for  
damage caused by chemical or abrasive  
cleaning.  
Fig. 25  
Let the oven cool dow n and pay spe-  
cia l a tten tion n o to tou ch th e h ot  
heating elements inside the oven cav-  
ity.  
Assembling and  
dismantling of the side  
runner frames  
– Fit the side runner frames into the  
holes on the side walls inside the  
oven (Fig. 25).  
– Slide the tray and rack into the run-  
ners (Fig. 26).  
The rack must be fitted so that the  
safety catch, which stops it sliding out,  
faces the inside of the oven.  
To dismantle, operate in reverse order.  
Fig. 26  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fig. 27a  
Fig. 27b  
Fig. 27c  
Fig. 27d  
Removing the oven  
door  
Please operate as follows:  
Open the door completely.  
The swivel retainers of the rh and lh  
hinges (fig. 27a) are hooked onto  
the metal bar above them (fig. 27b).  
Lift the oven door slightly. The noch  
on the bottom of the hinge will dis-  
engage (fig. 27c).  
Now pull the oven door forwards off  
the appliance. Release both hinge  
sections from the slots (fig. 27d).  
Door assembly  
Grip the door (as indicated in figure  
27) and refit it in reverse order of  
removing procedure.  
Fig. 27  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FOR THE INSTALLER  
Lo ca t io n  
This cooker has class 2/1” overheating protection so that it can be installed  
next to a cabinet.  
The appliance may be installed in a kitchen, Kitchen/diner or a bed sitting room, but  
not in a room or space containing a bath or a shower.  
The appliance must not be installed in a bed-sitting room of less than 20 m3.  
The appliance is designed and approved for domestic use only and should not be  
installed in a commercial, semi commercial or communal environment.  
Your product will not be guaranteed if installed in any of the above environments and  
could affect any third party or public liability insurances you may have.  
If the cooker is installed adjacent to furniture which is higher than the gas hob cook-  
top, a gap of at least 200 mm must be left between the side of the cooker and the fur-  
niture.  
The furniture walls adjacent to the cooker must be made of material resistant to heat.  
The veneered synthetic material and the glue used must be resistant to a temperature  
of 90°C in order to avoid ungluing or deformations.  
The cooker may be located in a kitchen, a kitchen/diner or bed-sitting room but not in  
a room containing a bath or shower.  
Curtains must not be fitted immediatly behind appliance or within 500 mm of the sides.  
It is essential that the cooker is positioned as stated in Fig. 28.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Th e cooker must be in stalled by a qualified tech n ician an d in complian ce  
w ith local safety standards.  
If the cooker is located on a pedestal it is necessary to provide safety measures to pre-  
vent falling out.  
200 mm  
500 mm  
A
U
T
O
Fig. 28  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fit t in g t h e a d ju st a b le feet  
The adjustable feet must be fitted  
to the base of the cooker before  
use.  
Rest the rear of the cooker an a  
piece of the polystyrene packaging  
exposing the base for the fitting of  
the feet.  
Fig. 29  
Fit the 4 legs by screwing them  
tight into the support base as  
shown in picture 30.  
Fig. 30  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Moving the cooker  
Warning  
W h e n ra isin g co o ke r to u p rig h t  
position alw ays ensure tw o people  
ca rry ou t th is ma n oeu vre to p re-  
vent damage to the adjustable feet  
(fig. 31).  
Warning  
Be carefull: do n ot lift th e cooker  
by th e d oor h an d le w h en raisin g  
to the upright position (fig. 32).  
Fig. 31  
Warning  
When moving cooker to its final posi-  
tion DO NOT DRAG (fig. 33).  
Lift feet clear of floor (fig. 31).  
Fig. 32  
Levelling the cooker  
The cooker may be levelled by screw-  
ing the lower ends of the feet IN or  
OUT (fig. 34).  
Fig. 32  
Fig. 33  
Fig. 34  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
St a b ilit y b ra cket  
We recommend a stability bracket is fitted to the cooker.  
The type shown in fig. 35 can be purchased from most plumbers merchants and do it  
yourself (D.I.Y.) shops.  
Existing  
slot in rear  
of cooker  
Brackets  
Fig. 35  
Dotted line showing the  
position of cooker when fixed  
Outline of cooker  
backplate at the  
engagement slot  
Floor fixing  
Wall fixing  
Dimension is in millimetres  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Pro viso n fo r ven t ila t io n  
The appliance should be installed into a room or space with an air supply in accor-  
dance with BS 5440-2: 2000.  
For rooms with a volume of less than 5 m3 - permanent ventilation of 100 cm2 free  
area will be required.  
For rooms with a volume of between 5 m3 and 10 m3 a permanent ventilation of  
50 cm2 free area will be required unless the room has a door which opens directly to  
the outside air in which case no permanent ventilation is required.  
For rooms with a volume greater than 10 m3 - no permanent ventilation is required.  
NB. Regardless of room size, all rooms containing the appliance must have  
direct access to the outside air via an openable w indow or equivalent.  
Where there are other fuel burning appliances in the same room, BS 5440-2: 2000  
should be consulted to determine the correct amount of free area ventilation require-  
ments.  
The above requirements allow also for use of a gas oven and grill but if there are  
other gas burning appliances in the same room, consult a qualified engineer.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga s in st a lla t io n  
IMPORTANT NOTE  
This appliance is supplied for use on NATURAL GAS or LPG (check the gas regulation  
label attached on the appliance).  
Appliances supplied for use on NATURAL GAS: they are adjusted for this gas only and  
cannot be used on any other gas (LPG) without modification. The appliances are  
manufactured for conversion to LPG.  
Appliances supplied for use on LPG: they are adjusted for this gas only and cannot  
be used on any other gas (NATURAL GAS) without modification. The appliances are  
manufactured for conversion to NATURAL GAS.  
If the NATURAL GAS/LPG conversion kit is not supplied with the appliance this kit can  
be purchased by contacting the After-Sales Service.  
INSTALLATION & SERVICE REGULATIONS (UNITED KINGDOM)  
It is a legal requirement that all gas appliances are Installed & Serviced by a competent  
person in accordance with the current editions of the following Standards &  
Regulations or those regulations appropriate to the geographical region in which they  
are to be installed:  
Gas Safety (Installation & Use) Regulations  
Building Regulations  
British Standards  
Regulations for Electrical Installation  
Installation and service of any gas product must be made by a suitably qualified person  
competent on the type of product being installed or serviced and holding a valid  
certificate of competence for the work being carried out. Currently the proof of  
competence is the Accredited Certification Scheme (ACS) or S/NVQ that has been  
aligned to the ACS.  
It is also a requirement that all businesses or self employed installers are members of a  
class of person approved by the Health and Safety Executive. Currently the only body  
with such approval is CORGI.  
Failure to install the appliance correctly could invalidate any manufacturers warranty  
and lead to prosecution under the above quoted regulation.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ga s co n n ect io n  
The installation of the gas appliance to Natural Gas or LP Gas must be carried out by a  
C.O.R.G.I. registered installer. Installers shall take due account of the provisions of the  
relevant British Standards Code of Practice, the Gas Safety Regulations and the Building  
Standards (Scotland)(Consolidation) Regulations issued by the Scottish Development  
Department.  
Installation to Natural Gas  
Installation to Natural Gas must conform to the Code of Practice, etc.  
The supply pressure for Natural Gas is 20 mbar.  
The installation must conform to the relevant British Standards.  
Installation to LP Gas  
When operating on Butane gas a supply pressure of 28-30 mbar is required. When  
using Propane gas a supply pressure of 37 mbar is required.  
The installation must conform to the relevant British Standards.  
Warning: Only a C.O.R.G.I. registered installer, also with technical knowledge of elec-  
tricity should install the appliance. He should observe the Regulations and Codes of  
Practice governing such installation of gas appliances.  
Note: It is recommended that the gas connection to the appliance is installed with a  
flexible connecting tube made to BS5386.  
No t es:  
Flexible hoses can be used w here the sited ambient temperature of the  
h o se d o e s n o t e xce e d 7 0 °C. Th e se h o se s m u st b e m a n u fa ctu re d in  
accordance w ith BS669 part 1 and be of the correct construction for the  
type of gas being used.  
Gas hoses designed for natural gas MUST NOT be used for supplying LPG  
gas (LPG gas hoses can be identified by a either a red band or stripe on  
the rubber outer coating of the hose).  
The hose should not be crushed or trapped or be in contact w ith sharp or  
abrasive edges.  
Using a suitable leak detection fluid solution (e.g. Rocol) check each gas connection  
one at a time by brushing the solution over the connection.  
The presence of bubbles will indicate a leak.  
If there is a leak, tighten the fitting and then recheck for leaks.  
IMPORTANT!  
Do not use a naked flame to test for leaks.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GB  
Gas connection  
Cat: II 2H3+  
The gas supply must use the nearest gas inlet pipe which is located at the left or the  
right hand side at the rear of the appliance (figs. 36a, 37).  
The hose should also be connected in such away that it does not touch the floor.  
To screw the connecting tube operate with two spanners (fig.36b).  
The unused end inlet pipe must be closed with the plug interposing the gasket.  
After connecting to the mains, check that the coupling are correctly sealed,  
using soapy solution, but never a flame.  
Fig. 36b  
Left gas  
inlet pipe  
Right gas  
inlet pipe  
Plug  
1/2” BSP (male)  
Fig. 36a  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT PRESCRIPTIONS FOR GAS CONNECTION  
Rear wall  
Suggested area for  
gas mains connection  
Fig. 37  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Co n versio n t o Na t u ra l Ga s o r t o LPG  
Injectors replacement of top burners  
Every cooker is provided with a set of injectors for the various types of gas.  
Injectors not supplied can be obtained from the After-Sales Service.  
Select the injectors to be replaced according to the table at page 42.  
The nozzle diameters, expressed in hundredths of a millimetre, are marked on the  
body of each injector.  
To replace the injectors proceed as follows:  
Remove the grids and extract the burner bodies.  
Using a wrench, substitute the nozzle injectors J” (Fig. 38a - 38b) with those most  
suitable for the kind of gas for which it is to be used (see Table for the choice of the  
injectors).  
The burners are conceived in such a w ay so as not to require the regulation  
of the primary air.  
J
J
Fig. 38a  
Fig. 38b  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting of the minimum of the top burners  
Considering that in the minimum position the flame must have a length of about 4 mm  
and must remain lit even with a quick turn from the maximum position to that of mini-  
mum.  
The flame adjustment is done in the following way:  
Turn on the burner  
Tum the tap to the MINIMUM position  
Take off the knob  
– With a small flat screwdriver turn the screw inside the tap rod to the correct regula-  
tion (fig. 39).  
Normally for LPG, tighten up the regulation screw.  
Fig. 39  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table for the choice of the injectors  
GB  
Cat: II 2 H3 +  
G 30 - 28-30 mbar  
G 31 - 37 mbar  
G 20  
20 mbar  
Reduced  
Power  
Nominal  
Power  
BURNERS  
By-pass  
[1/100 mm]  
By-pass  
[1/100 mm]  
Ø injector  
[1/100 mm]  
Ø injector  
[1/100 mm]  
[kW]  
[kW]  
Auxiliary (A)  
Semi-rapid (SR)  
Rapid (R)  
1,00  
1,75  
3,00  
3,50  
0,30  
0,45  
0,75  
1,50  
27  
32  
42  
65  
50  
65  
85  
95  
72 (X)  
97 (Z)  
115 (Y)  
135 (T)  
Triple-ring (TR)  
INCREASE OF AIR NECESSARY FOR GAS COMBUSTION (2 m3/h x kW)  
BURNERS  
Air necessary for combustion [m3/h]  
2,00  
Auxiliary (A)  
Semi-rapid (SR)  
Rapid (R)  
3,50  
6,00  
7,00  
Triple-ring (TR)  
Lu b rica t io n o f t h e g a s t a p s  
The operations must be executed by a qualified technician.  
IMPORTANT  
All in terven tion regardin g in stallation main ten an ce an d con version of th e  
appliance must be fulfilled w ith original factory parts.  
The manufacturer declines any liability resulting from the non-compliance of  
this obligation.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Elect rica l in st a lla t io n  
Fo r yo u r sa fet y p lea se rea d t h e fo llo w in g  
in fo rm a t io n :  
IMPORTANT: The cooker must be installed in accordance w ith the manufacturers  
instructions.  
Incorrect installation, for w hich the manufacturer accepts no responsibility, may  
cause damage to persons, animals and things.  
Gen era l  
– Connection to the mains must be carried out by qualified personnel in accordance  
with current regulations.  
The appliance must be connected to the mains checking that the voltage corre-  
sponds to the value given in the rating plate and that the electrical cable sections  
can withstand the load specified on the plate.  
The appliance can be connected directly to the mains placing an omnipolar switch  
with minimum opening between the contacts of 3 mm between the appliance and  
the mains.  
The power supply cable must not touch the hot parts and must be positioned so  
that it does not exceed 75°C at any point.  
– Once the appliance has been installed, the switch must always be accessible.  
If the power supply cable is damaged it must be substituted by a suitable cable.  
N.B. For connection to the mains, do not use adapters, reducers or branch-  
ing devices as they can cause overheating and burning.  
If the installation requires alterations to the domestic electrical system call an expert.  
He should also check that the electrical system is suitable for the power absorbed by  
the appliance.  
IMPORTANT: this cooker must be connected to a suitable double pole control unit  
adjacent to the cooker.  
No diversity can be applied to this control unit.  
The connection of the appliance to earth is mandatory.  
The manufacturer declines all responsability for any inconvenience resulting from the  
inobservance of this condition.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electrical feeder cable connection  
To connect the supply cable:  
- Remove the screws securing the cover A” on the rear of the cooker (fig. 40).  
- Feed the supply cable through the cable clamp D. The supply cable must be of a  
suitable size for the current requirements of the appliance; see the section Feeder  
cable section” (fig. 40).  
- Connect the wires to the terminal block B” as shown in the diagram in figure 41;  
or connect the phase wires to the terminal block B” and the earth wire to the  
terminal PE as shown in figure 40.  
- Take up any slack in the cable and secure with the cable clamp D.  
- Replace the cover A.  
Before effecting any intervention on the electrical parts of the appliance, the  
connection to the netw ork must be interrupted.  
Feeder cable section type H05RRF  
230 V  
3 x 2,5 mm2 (**)  
(**) – Connection with wall box connection.  
Earth cable must be 2 cm longer than neutral and live cables.  
230 V  
PE  
L1 N PE  
(L2)  
N
D
L
B
Fig. 41  
A
Fig. 40  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Ap p lia n ce servicin g  
CDA p rovid e a q u a lity a n d effective a fter-sa les service to cover a ll you r  
servicing needs.  
Please attach your receipt to this page for safekeeping.  
Please h elp us to h elp you by h avin g th e follow in g in formation available  
w hen booking a service-call:  
1. Model type, make and model – see the product data plate.  
2. Evidence of installation / purchase date  
3. Retailer where appliance was purchased  
4. Clear and concise details of the fault  
5. Full address including postcode and any contact phone numbers  
Contact telephone numbers  
CDA Customer Care Department  
Telephone: 01949 862012  
• Fax: 01949 862003  
• Email: service@cda.eu  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Gu a ra n t ee  
CDA appliances carry a five-year parts and a one-year labour guarantee.  
CDA will repair or replace any defect or part attributable to faulty material or workman-  
ship. Within the first year this will be free of both labour and parts charges. After the  
first year and within five years, the parts will be supplied free of charge provided that  
the repair is carried out by an agent authorised by CDA and the labour will be charged  
at the commercial rate applicable at the time of repair.  
The appliance must have been installed by a suitably qualified person and in accor-  
dance with the manufacturers instructions and current legislation. The guarantee does  
not cover faults caused by the incorrect fitting of appliances.  
Limit of Cover  
The guarantee does not cover cosmetic damage e.g. discolouration or oxidisation.  
• Proof of purchase or installation date must be produced before a service-call will be  
booked.  
The appliance must be used for domestic purposes only. Appliances used for com-  
mercial or professional purposes are not covered by the guarantee. Commercial war-  
ranty is available at extra cost.  
The appliance must not be modified or tampered with or repair attempted by any  
unauthorised person.  
The guarantee does not cover damage caused in transit or by misuse, accident,  
abuse or neglect.  
The guarantee does not cover routine maintenance.  
• Use of parts not supplied or recommended by |C|D|A| will invalidate the warranty.  
Rubber seals, filters, removable glass parts, control knobs and buttons, fuses and  
light bulbs will need replacing periodically and are not covered by the guarantee.  
Second-hand or reconditioned appliances are not covered by the guarantee.  
The conditions under which this guarantee is offered are in addition to the statutory  
rights of the domestic purchaser and these statutory rights are not affected by this  
guarantee.  
CDA reserve the right to change specification without prior notice.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Descriptions and illustrations in this booklet are given as simply indicative.  
The manufacturer reserves the right, considering the characteristics of the models described here, at  
any time and without notice, to make eventual necessary modifications for their construction or for  
commercial needs.  
Cod. 1103120  
ß5  
RC 9 0 2 0 .. co o kers  
The  
Group Ltd  
Harby Road Langar Nottingham NG13 9HY UK  
VAT No : 528 7168 19 Registered in England : 2621460  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Bialetti Coffeemaker MOKAEXPRESS User Manual
Blaupunkt Car Stereo System Mnchen CD51 User Manual
Bosch Power Tools Grinder 1810PS User Manual
Briggs Stratton Power Supply 540000 User Manual
Briggs Stratton Pressure Washer 020239 1 User Manual
Brother Garage Door Opener PT 1090 User Manual
Bushnell Binoculars 260140 User Manual
Casio Watch MA0608 EB User Manual
Char Broil Gas Grill 463821908 User Manual
Chrysler Automobile 2005 Sebring Convertible User Manual