Blaupunkt Car Stereo System Mnchen CD51 User Manual

Radio / CD  
Modena CD51  
München CD51  
Operating instructions  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CONTROLS  
1
button - unlatches the flip/  
release panel  
9
button - opens the flip/release  
panel  
2
3
Volume control  
Button - switches the radio and  
mute function on/off  
RDS button - switches RDS con-  
venience function on/off (radio  
data system).  
Selects variable radio texts.  
BND button (band), source se-  
lection for radio mode,  
selection of FM memory levels  
and the wavebands MW and LW  
(München CD51 does not fea-  
ture MW and LW)  
TS, starts the Travelstore func-  
tion.  
:
;
Arrow-key block  
OK button - confirms menu en-  
tries and starts the scan function  
X-BASS button to adjust and  
switch X-BASS on/off  
AUDIO button (Audio) - adjusts  
bass and treble, balance and  
fader  
Key block 1 - 6  
TRAF button, switches traffic in-  
formation standby on/off  
4
<
=
5
>
?
@
CD•C button - selects between  
CD, CD changer (if connected)  
and AUX sources  
6
7
Display (display field)  
button - indicates the time on  
the display  
DIS, change display contents  
8
MENU button - selects the menu  
for basic settings  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TABLE OF CONTENTS  
Traffic announcements in CD mode .. 40  
Removing a CD ................................ 40  
Notes and accessories ............. 28  
Road safety ...................................... 28  
Installation ........................................ 28  
Accessories ..................................... 28  
International telephone information.... 28  
CD changer mode..................... 41  
Starting CD changer mode............... 41  
Selecting a CD................................. 41  
Selecting a track .............................. 41  
Fast track selection .......................... 41  
Fast search (audible) ........................ 41  
Changing the display ........................ 41  
Repeating individual tracks or  
whole CDs (REPEAT)....................... 41  
Random play (MIX) ........................... 42  
Scanning all tracks on all CDs  
(SCAN) ............................................ 42  
Interrupting Play (PAUSE) ................ 42  
Flip/release panel ..................... 29  
Switching on/off ....................... 30  
Volume adjustment ................... 31  
Radio mode............................... 33  
Switching to radio mode ................... 33  
RDS function (AF, REG) ................... 33  
Selecting the waveband/memory ...... 33  
Tuning into a station .......................... 34  
Setting the sensitivity of the station  
search mode .................................... 34  
Storing stations ................................ 34  
Storing stations automatically  
(Travelstore) ..................................... 35  
Listening to preset stations ............... 35  
Scanning receivable stations  
(SCAN) ............................................ 35  
Setting the scanning time ................. 35  
Programme type (PTY) ..................... 35  
Optimising radio reception................ 37  
Selecting radio text display ............... 37  
Setting the display ............................ 37  
CLOCK - Time ........................ 43  
Tone and volume balance ...... 44  
Adjusting the bass ............................ 44  
Adjusting the treble .......................... 44  
Setting the volume distribution  
left/right (balance) ............................ 44  
Setting the volume distribution  
front/rear (fader) ............................... 44  
X-BASS .................................. 45  
Setting the level indicator ...... 45  
External audio sources .......... 46  
Technical data ........................ 46  
Guarantee .............................. 47  
Installation instructions........ 180  
Traffic information..................... 38  
CD Mode ................................... 39  
Starting CD mode ............................ 39  
Selecting a track .............................. 39  
Fast track selection .......................... 39  
Fast search (audible) ........................ 39  
Random play (MIX) ........................... 39  
Scanning tracks (SCAN) .................. 40  
Repeating a track (REPEAT) ............. 40  
Interrupting play (PAUSE) ................. 40  
Changing the display ........................ 40  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTES AND ACCESSORIES  
Thank you for deciding in favour of a  
Blaupunkt product.We wish you a great  
deal of pleasure with your new car ra-  
dio.  
Accessories  
Please use only Blaupunkt-approved  
accessories.  
Before using your car radio, please read Remote controls  
these instructions carefully. The Blau-  
The most important functions can be  
punkt editors are constantly working to  
make our instruction manuals as clear  
and easy to understand as possible.  
Should you nonetheless have any ques-  
tions about how to operate your new car  
radio, please contact your specialist  
dealer or call the telephone hotline for  
your country, the number of which is giv-  
en on the back page of this manual.  
selected safely from the steering wheel  
using the optional remote controls RC  
08 and RC 10.  
Amplifiers  
All Blaupunkt amplifiers are suitable for  
use with the radio.  
CD changer  
The following Blaupunkt CD changers  
can be connected to the radio: CDC  
A 06, CDC A 08, CDC A 072 and IDC  
A 09.  
The CD changers CDC A 5 and CDC  
A 071 can also be connected if you use  
an adapter cable (Blaupunkt no.: 7 607  
889 093).  
Road safety  
Road safety has priority.Only op-  
erate your car radio if road and traf-  
fic conditions allow.Familiarise your-  
self with the unit before setting off on  
your journey.  
You should always be able to hear  
police, fire and ambulance sirens in  
good time. For this reason, set the  
volume of your car radio at a suita-  
ble level.  
International telephone  
information  
Should you have any questions about  
how to use the car radio or require any  
further information, please call us!  
The telephone information service num-  
bers are printed on the last page of this  
manual.  
Installation  
If you would like to install your car radio  
yourself, please read the installation and  
connection instructions at the end of the  
manual.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FLIP/RELEASE PANEL  
G First pull the flip/release panel  
straight and then to the left out of  
the unit.  
Flip/release panel  
Theft protection  
Your car radio is fitted with a flip/release  
panel to guard against theft. Without this  
panel, the unit is worthless to the thief.  
Protect your unit from theft by taking the  
flip/release panel with you every time  
you leave the car.Do not leave the panel  
behind in the car, even if it is out of sight.  
The constructive design of the panel  
makes for simple handling.  
G After removing the flip/release pan-  
el, the unit switches itself off.  
G All the current settings are saved.  
G If there is a CD in the unit, it re-  
mains there.  
Attaching the flip/release panel  
G Slide the flip/release panel from left  
to right into the unit guide.  
Note:  
G Press the left side of the panel into  
G Do not drop the flip/release panel.  
the unit until it slots into place.  
G Do not expose the flip/release pan-  
el to direct sunshine or other sourc-  
es of heat.  
G Keep the flip/release panel in the  
case provided.  
G Avoid direct skin contact with the  
flip/release panel. Please clean it  
when necessary with some white  
spirit on a lint-free cloth.  
Note:  
G Do not press against the display  
while attaching the flip/release pan-  
el.  
Removing the flip/release panel  
1
If the device was switched on when the  
panel was removed, it will switch itself  
back on automatically with the last set-  
tings (radio, CD, CD-changer or AUX)  
as soon as the panel is replaced.  
G Press the  
button 1.  
This unlatches the flip/release panel.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SWITCHING ON/OFF  
Switching on/off  
There are various ways of switching the  
car radio on and off, as described be-  
low.  
Switching on by inserting a CD  
If there is no CD in the CD compart-  
ment when the car radio is switched off,  
G press the  
button 9.  
This flip/release panel then opens.  
Switching on/off using the ignition  
If the car radio is correctly connected to G Without exerting any force, slide  
the ignition and has not been switched  
off using the button 3, it is switched  
on/off simultaneously with the ignition.  
the CD into the compartment, print-  
ed side uppermost, until you feel  
some resistance.  
You can also switch on your car radio  
when the vehicle ignition is off.  
The CD is automatically drawn into the  
drive.  
Do not hinder or assist the drive as it  
draws the CD in.  
G To do so, press the button 3.  
Note:  
G Press the flip/release panel gently  
G To protect the vehicle battery, the  
unit switches off automatically after  
one hour.  
until you feel it slot into place.  
The car radio switches itself on and CD  
playback begins.  
Switching on/off using the flip/  
release panel  
G Remove the flip/release panel.  
The unit switches itself off.  
G Replace the flip/release panel once  
more.  
The device switches on. The most re-  
cent setting (radio, CD, CD-changer or  
AUX) is restored.  
Switching on/off using the button  
3
G To switch the unit on, press the but-  
ton 3.  
G To switch the unit off, hold the but-  
ton 3 down for more than two  
seconds.  
The car radio is now switched off.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOLUME ADJUSTMENT  
Mute setting  
Volume adjustment  
This feature enables you to lower the  
system volume instantaneously (mute).  
The system volume can be adjusted in  
steps from 0 (off) to 66 (maximum).  
G Briefly press button 3.  
G To raise the system volume, turn  
the volume control 2 to the right.  
“MUTE” appears on the display.  
G To lower the system volume, turn  
the volume control 2 to the left.  
Activating the mute setting  
The unit's mute level is adjustable.  
G Press the MENU button 8.  
Setting the switch-on volume  
You can set the volume at which you  
wish the car radio to play when switched  
on.  
G Press the or button : repeat-  
edly until “MUTE LEVEL” appears  
on the display.  
G Press the MENU button 8.  
G Use the  
mute level.  
buttons : to set the  
G Press the or button : repeat-  
edly until “ON VOLUME” appears  
on the display.  
G When you have completed the set-  
ting, press either the MENU button  
8 or OK ; twice.  
G Use the  
buttons : to set the  
switch-on volume.  
Telephone Audio/Navigation  
Audio  
If you select the “0” setting, the volume  
played before the unit was last switched  
off will be reactivated.  
If your car radio is connected to a mo-  
bile telephone or navigation system,  
then when the telephone is taken “off  
the hook”, or when the navigation sys-  
tem is speaking, the car radio is muted.  
The telephone conversation or speech  
output are reproduced via the car radio  
speakers.This requires the mobile tele-  
phone or navigation system to be con-  
nected to the car radio as described in  
the installation instructions.  
Note:  
G To protect your hearing, the power-  
on volume is limited to a value of  
“38”. If the volume level was higher  
when the unit was switched off, the  
volume will be reset to “38” when  
the unit is switched on again.  
When you have finished making your  
changes,  
Your Blaupunkt dealer can tell you which  
navigation systems can be used with  
your car radio.  
G press the MENU button 8 or OK  
; twice.  
If a traffic announcement is received  
during a telephone call, or while the  
navigation system is speaking, the traf-  
fic announcement is not reproduced  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
VOLUME ADJUSTMENT  
until the call or the speech output has  
finished.  
Setting the volume for the  
confirmation tone  
If a call is received or if the navigation  
system begins speaking during a traffic  
announcement, the announcement is  
reproduced. The telephone call or  
speech output can be heard when the  
traffic announcement has finished.  
If you hold down a button for longer than  
two seconds when using certain func-  
tions, e.g. storing a station on a station  
button, a confirmation tone (beep)  
sounds.The volume of this beep is ad-  
justable.  
The volume at which navigation output  
or telephone calls start is adjusted as  
follows:  
G Press the MENU button 8.  
G Press the or button : repeat-  
edly until “BEEP” appears on the  
display.  
G Press the MENU button 8.  
G Press the or button : until  
“TEL/NAVI VOLappears in the  
display.  
G Adjust the volume using the and  
buttons :. “0” means the beep  
is off, “9” means maximum beep  
volume.  
G Set the desired volume with the  
buttons :.  
G When you have completed the set-  
ting, press either the MENU button  
8 or OK ;.  
G When the setting process is com-  
plete, press the MENU button 8  
or OK ; twice.  
Note:  
You can adjust the volume level of tele-  
phone calls and of speech output as  
they are made with the volume control  
2.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Switching REG function on/off  
Radio mode  
To use the RDS functions AF and REG,  
This unit is equipped with an RDS radio  
receiver.Many of the receivable FM sta-  
tions transmit a signal that not only car-  
ries the programme but also additional  
information such as the station name  
and programme type (PTY).  
G press the MENU button 8.  
G Press the or button : repeat-  
edly until “REG” appears on the  
display. OFF” or “ON” will be dis-  
played alongside “REG”.  
The station name appears on the dis-  
play as soon as it is received.  
G To switch REG on or off, press the  
or button :.  
Switching to radio mode  
If you are in CD, CD changer or AUX  
mode:  
G Press the MENU button 8 or OK  
;.  
Switching the RDS convenience  
function on/off  
G press the BND/TS button 5 re-  
peatedly until “RADIO” appears on  
the display.  
G To use the RDS functions AF and  
REG, press the RDS button 4.  
RDS function (AF, REG)  
The RDS convenience functions are  
active when RDS lights up on the dis-  
play with a symbol. When the RDS con-  
venience functions are activated, “REG  
ON” or “REG OFF” appears briefly on  
the display.  
The RDS functions AF (Alternative Fre-  
quency) and REG (Regional) extend  
your radio's range of functions.  
G AF: If this RDS function is activat-  
ed, the unit automatically tunes into  
the best receivable frequency for  
the station that is currently set.  
Selecting the waveband/  
memory  
G REG: Some radio stations set  
aside some of their broadcasting  
time for regional programmes that  
provide different regional content.  
With the REG function, your car ra-  
dio is prevented from switching to  
alternative frequencies with a dif-  
ferent regional content.  
This unit can receive programmes  
broadcast over the FM as well as MW  
and LW (AM) waveband (München  
CD51 only receives FM). There are  
three preset memory levels for the FM  
range and one each for the MW and  
LW ranges (only FM1, FM2 and FMT  
for München CD51).  
Note:  
Six stations can be stored on each  
memory level.  
G REG has to be specially activated/  
deactivated in the unit's menu.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
G In order to switch between memory Setting the sensitivity of the  
levels or wavebands, briefly press  
the BND/TS button 5.  
station search mode  
You can choose whether you wish to  
preset only strong or also poor-recep-  
tion stations.  
Tuning into a station  
There are various methods available for  
tuning into a station.  
G Press the MENU button 8.  
G Press the or button : repeat-  
edly until “SENS” appears on the  
display.  
Automatic station search mode  
G Press the or button :.  
The unit tunes into the next receivable  
station.  
G Press the button :.  
The display shows the currently set val-  
ue for sensitivity. SENS HI6” denotes  
maximum sensitivity.SENS LO1is the  
minimum. If “SENS LO” is selected, “lo”  
appears on the display.  
Tuning into stations manually  
You can also tune into stations manual-  
ly.  
G Press either the or buttons :.  
G Use the  
buttons : to set the  
desired degree of sensitivity.  
Note:  
G You can only tune into stations  
manually if the RDS function has  
first been deactivated.  
G When you have completed the set-  
tings, press the MENU button 8  
or the OK buttons ;.  
Browsing through broadcasting  
networks (only FM)  
Storing stations  
If a radio station provides several pro-  
grammes, you have the option of brows-  
ing through its so-called “broadcasting  
network”.  
Storing stations manually  
G Select the required FM memory  
level, FM1, FM2, FMT or either  
waveband MW or LW (München  
CD51 does not feature MW and  
LW).  
G Press the or button : to  
move to the next station on the  
broadcasting network.  
G Tune into the desired station.  
Note:  
G Hold down one of the preset sta-  
tion buttons 1 - 6 > on which you  
wish to store the station for more  
than two seconds.  
G If you want to use this feature, the  
RDS function must first be activat-  
ed.  
You will then only be able to switch to  
stations that you have received once  
already.To do so, use the Scan or Trav-  
elstore function.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Ending SCAN, continuing to listen  
to a station  
Storing stations automatically  
(Travelstore)  
G Press the OK button ;.  
The scanning process is completed, the  
station last scanned remains active.  
You can store the six stations with the  
strongest reception in the region auto-  
matically (only FM). The stations are  
stored in the FMT memory.  
Setting the scanning time  
Note:  
G Press the MENU button 8.  
G Stations that were previously  
stored in this memory are deleted  
in the process.  
G Press the or button : repeat-  
edly until “SCANTIME” appears on  
the display.  
G Hold down the BND / TS button 5  
for more than two seconds.  
G Use the  
buttons : to set the  
desired scanning time.  
The automatic station-storing procedure  
begins. “TRAVEL-STORE” appears on  
the display. Once the process is com-  
pleted, the station stored in FMT mem-  
ory location 1 is played.  
G Once the setting has been com-  
pleted, press the MENU button 8  
or OK ; twice.  
Note:  
Listening to preset stations  
G The set scanning time also applies  
to scanning in the CD and CD  
changer mode.  
G Select the memory or frequency  
range.  
G Hold down the preset station but-  
ton 1 - 6 > of the desired station.  
Programme type (PTY)  
Besides transmitting the station name,  
some FM stations also provide informa-  
tion on the type of programme they are  
broadcasting. This information can be  
received and displayed by your car ra-  
dio.  
Scanning receivable stations  
(SCAN)  
You can briefly listen in to all receivable  
stations. The scanning time can be set  
in the menu at between 5 and 30 sec-  
onds.  
For example, the programme types can  
be:  
Starting SCAN  
CULTURE  
SPORT  
ROCK  
TRAVEL  
NEWS  
JAZZ  
POP  
G Hold down the OK button ; for  
more than two seconds.  
CLASSICS  
The scanning process begins. “SCAN”  
appears briefly on the display, followed  
by the current station name or frequen-  
cy, which flashes.  
You can use the PTY function to select  
stations of a particular programme type.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
PTY-EON  
Selecting programme type and  
starting a search  
When the programme type has been  
selected and the search started, the car  
radio switches from the current station  
to a station featuring the selected pro-  
gramme type.  
G Press the or button :.  
The current programme type appears  
on the display.  
G If you would like to select a differ-  
ent programme type, you can  
change to another programme time  
within the time the programme is  
displayed by pressing the or  
button :.  
Note:  
G If no station with the selected pro-  
gramme type is located, a beep  
sounds and “NO PTY” appears  
briefly on the display. The unit  
tunes into the station last received  
once again.  
Or  
G Press one of the buttons 1 - 6 >  
to select the programme type  
stored on that particular button.  
G If the set station or another station  
in the broadcasting network trans-  
mits the selected programme type  
at a later time, the car radio auto-  
matically switches from the current  
station - or from CD or CD changer  
mode - to the station featuring the  
desired programme type.  
The selected programme type will ap-  
pear briefly on the display.  
G Press the or button : to start  
the search.  
The next station corresponding to your  
selected programme type will be tuned  
into.  
Switching PTY on/off  
G Press the MENU button 8.  
Storing the programme type on the  
station buttons  
G Press the or button : repeat-  
edly until “PTY ON” or “PTY OFF”  
appears on the display.  
G Use the or button : to select  
a programme type.  
G Press the or button : to  
switch PTY on (ON) or off (OFF).  
G Hold down the desired station but-  
ton 1 - 6 > for more than two sec-  
onds.  
When PTY is activated, PTY lights up  
on the display.  
The programme type is now stored on  
the selected station button 1 - 6 >.  
G Press the MENU button 8 or OK  
;.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RADIO MODE  
Optimising radio reception  
Selecting radio text display  
Some radio stations use the RDS sig-  
nal to broadcast advertising or other in-  
formation instead of their station name.  
Such “radio texts” appear on the dis-  
play. You can either allow or block the  
display of radio text.  
High-frequency cut-off feature  
(HICUT)  
The HiCut function improves the sound  
during poor radio reception (only FM).  
If interference occurs, the treble is au-  
tomatically reduced and thus also the  
interference level.  
G Press the RDS button 4 until  
“NAME FIX” appears on the dis-  
play.  
Switching HiCut on/off  
G Press the MENU button 8.  
G In order to reactivate the display of  
“radio texts”, hold down the RDS  
button 4 until “NAME VAR” ap-  
pears on the display.  
G Press the or button :  
repeatedly until “HICUT” appears  
on the display.  
G Use the or button : to select  
Setting the display  
HICUT.  
In radio mode you can choose between  
the continuous display of the time or the  
continuous display of the station name/  
frequency.  
“HICUT 0” denotes no treble reduction,  
“HICUT 1” the greatest automatic reduc-  
tion of the treble and the interference  
level.  
G Hold down the  
/ DIS button 7  
until the desired feature appears on  
G Press the MENU button 8 or  
OK ;.  
the display.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TRAFFIC INFORMATION  
Traffic information  
Your car radio is equipped with an RDS-  
EON reception system. EON stands for  
Enhanced Other Network.  
Setting the traffic  
announcement volume  
G Press the MENU button 8.  
G Press the or button : repeat-  
edly until “TA VOLUME” appears  
on the display.  
When a traffic announcement (TA) is  
broadcast, your unit will automatically  
switch, within a broadcasting network,  
from a station which does not transmit  
traffic information to one that does.  
G Use the or button : to set the  
desired volume.  
G Once the setting is completed,  
press the MENU button 8 or OK  
; twice.  
The unit reverts to the programme pre-  
viously listened to when the traffic an-  
nouncement is over.  
Note:  
Switching traffic information  
priority on/off  
G You can also adjust the volume  
during a traffic announcement for  
its duration by using the volume  
control 2.  
G Press the TRAF button ?.  
Priority for traffic announcements is ac-  
tivated when the traffic-jam symbol lights  
up on the display.  
Note:  
G You can also adjust the tone and  
volume balance for traffic an-  
nouncements. Please see the  
Tone and Volume Balance” sec-  
tion.  
Note:  
You will hear a warning tone,  
G if you leave the reception area of a  
traffic information station to which  
you are currently tuned in;  
G if you leave the reception area of a  
traffic information station when you  
are listening to a CD and the sub-  
sequent automatic search cannot  
locate a new traffic information sta-  
tion;  
G if you retune the radio from a traffic  
information station to one that does  
not broadcast traffic information.  
Either deactivate the priority for traffic  
information or switch to a station which  
broadcasts traffic information.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Selecting a track  
CD Mode  
You can use this unit to play standard G Press one of the buttons on the ar-  
CDs with a diameter of 12cm.  
row block : to select the next or  
previous track.  
Risk of damage to CD drive!  
Single CDs with a diameter of 8 cm  
and CDs which are not circular  
(“shape CDs”) should not be used.  
We accept no liability for any dam-  
age to the CD drive that may occur  
as a result of the use of unsuitable  
CDs.  
If the or button : is pressed once,  
the current track is played again from  
the beginning.  
Fast track selection  
For fast track selection backwards or  
forwards:  
G hold down either the or button  
: until fast track selection back-  
wards or forwards begins.  
Starting CD mode  
G If there is no CD in the drive,  
G Press the  
The flip/release panel opens.  
button 9.  
Fast search (audible)  
For a fast search backwards or forwards  
G Gently insert the CD into the CD  
compartment with the printed side  
uppermost until you feel some re-  
sistance.  
G keep the  
buttons : pressed  
until the fast search backwards or  
forwards begins.  
Random play (MIX)  
The CD will be drawn into the drive au-  
tomatically.  
Do not hinder or assist the drive as it  
draws the CD in.  
G Press the button 5 MIX >.  
“MIX CDappears briefly on the display,  
the MIX symbol lights up.The next track  
played will be randomly selected.  
G Close the panel using light pres-  
sure until you feel it latch into place.  
Stopping MIX  
CD playback begins.  
G Press the button 5 MIX > once  
G If there is already a CD in the drive,  
again.  
G press the CD•C button @ repeat-  
edly until “CD” appears on the dis-  
play.  
“MIX OFF” appears briefly on the dis-  
play, the MIX symbol goes out.  
Playback begins from the point at which  
it was last interrupted.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD MODE  
Ending Pause  
Scanning tracks (SCAN)  
You can briefly listen in to all the tracks G Press the button 3 > during the  
on a CD.  
pause.  
Play then resumes.  
G Hold down the OK button ; for  
more than two seconds. The next  
track starts to play.  
Changing the display  
G To alter the display between track  
Note:  
number and time or track number  
G The scanning time is adjustable.  
Read about setting the scanning  
time in the section “Setting the  
scanning time” in the chapter “Ra-  
dio mode”.  
and playing time, press the  
/
DIS 7 button once or several  
times for more than two seconds  
until the desired elements appear  
on the display.  
Stopping SCAN and continuing  
playback  
Traffic announcements in CD  
mode  
G Press the OK button ; to end  
G If you want to receive traffic an-  
nouncements whilst listening to a  
CD, press the TRAF ? button.  
scanning.  
The current track will then continue to  
play.  
Traffic announcement priority is active  
when the traffic-jam symbol lights up on  
the display.Please see the chapterTraf-  
fic information”.  
Repeating a track (REPEAT)  
G If you would like to repeat a track,  
press button 4 RPT >.  
Removing a CD  
“REPEATTRCKappears briefly on the  
display, the RPT symbol lights up. The  
track is then repeated until RPT is de-  
activated.  
G Press the  
button 9.  
The flip/release panel opens to the front  
and the CD is ejected.  
Stopping REPEAT  
G Carefully remove the CD and close  
G If you would like to end repeat,  
press the button 4 RPT > once  
again.  
the flip/release panel.  
“REPEAT OFF” appears briefly on the  
display, the RPT symbol goes out. Nor-  
mal playback is resumed.  
Interrupting play (PAUSE)  
G Press the button 3 >.  
PAUSE” appears on the display.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Fast search (audible)  
CD changer mode  
For a fast search backwards or forwards  
Note:  
G Information on handling CDs, in-  
serting CDs and operating the CD  
changer can be found in the oper-  
ating instructions accompanying  
your CD changer.  
G keep the buttons : pressed  
until the fast search backwards or  
forwards begins.  
Changing the display  
G To alter the display between track  
number and playing time or track  
number and time or track number  
Starting CD changer mode  
G Press the CD•C button @ repeat-  
edly until “CHANGER” appears on  
the display.  
and CD number, press the  
7 button once or several times for  
more than two seconds until the  
desired elements appear on the  
display.  
/ DIS  
Playback begins with the first CD the  
CD changer recognises.  
Selecting a CD  
Repeating individual tracks or  
whole CDs (REPEAT)  
G To change up or down to a different  
CD, press the or button :  
once or several times.  
G To repeat the current track, press  
the button 4 RPT > briefly.  
Selecting a track  
“REPEATTRCKappears briefly on the  
display and RPT lights up.  
G To move up/down from one track to  
another on the current CD,  
press the or button : once or  
several times.  
G To repeat play of the entire CD,  
press the button 4 RPT > once  
again.  
Fast track selection  
For fast track selection backwards or  
forwards:  
“REPEAT DISC” appears briefly on the  
display and RPT lights up.  
Stopping REPEAT  
G hold down either the or button  
: until fast track selection back-  
wards or forwards begins.  
G To stop the repeat function for the  
current track or CD,  
press the button 4 RPT > repeat-  
edly until “REPEAT OFF” appears  
briefly on the display and RPT  
goes out.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CD CHANGER MODE  
Stopping SCAN  
Random play (MIX)  
G To stop scanning, press the OK  
button ; briefly.  
G To play the tracks on the current  
CD in random order, press the but-  
ton 5 MIX >.  
The track currently being scanned then  
continues play.  
“MIX CDappears briefly on the display  
and MIX lights up.  
Note:  
G You can set the scanning time as  
required. Please see the section  
“Setting the scanning time” in the  
“Radio mode” chapter.  
G To play the tracks of all the inserted  
CDs in random order, press the  
button 5 MIX > once again.  
“MIX ALLappears briefly on the dis-  
play and MIX lights up.  
Interrupting Play (PAUSE)  
G Press the button 3 >.  
PAUSE” appears on the display.  
Note:  
G In the case of CD changers CDC  
A 08 and IDC A 09, all CDs in the  
changer are randomly selected. All  
other changers first play all the  
tracks on a CD in random selection  
before moving to the next CD in  
the changer.  
Ending Pause  
G Press the button 3 > during the  
pause.  
Play then resumes.  
Stopping MIX  
G Press the button 5 MIX > until  
“MIX OFF” appears briefly on the  
display and MIX goes out.  
Scanning all tracks on all CDs  
(SCAN)  
G To listen in briefly to all the tracks  
on all inserted CDs in ascending  
order, hold down the OK button ;  
for more than two seconds.  
“SCAN” appears on the display.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CLOCK - TIME  
G Press the  
buttons : to switch  
between the 12 and 24-hour mode.  
CLOCK - Time  
Briefly displaying the time  
G Press the MENU button 8 or OK  
; once you have completed the  
setting.  
G Press the  
/ DIS 7 button briefly  
to display the time.  
Setting the time  
Viewing the time with the car  
radio switched off and the  
ignition on  
Setting the time manually  
G To set the time manually, press the  
MENU button 8.  
G To view the time when the car radio  
is switched off and the ignition is  
switched on, press the MENU but-  
ton 8.  
G Press the or button : repeat-  
edly until “CLOCKSET” appears on  
the display.  
“MENU” appears on the display.  
G Press the button :.  
G Press the or button : repeat-  
edly until “CLK DISP OFF” or “CLK  
DISP ON” appears on the display.  
The time appears on the display. The  
minutes flash and can now be set.  
G Set the minutes using the or  
buttons :.  
G Press the  
button : to switch  
between ON and OFF.  
G Once the minutes have been set,  
press the button :. The hours  
now flash.  
G Press the MENU button 8 or OK  
; once you have completed the  
setting.  
G Set the hours using the or but-  
tons :.  
Briefly viewing the time when  
the car radio is switched off  
In order to view the time when the car  
radio is switched off,  
G Press the MENU button 8 or OK  
; twice, once you have complet-  
ed the setting.  
G press the button  
The time appears on the display for eight  
seconds.  
/ DIS 7.  
Selecting the 12/24-hour clock  
mode  
G Press the MENU button 8.  
“MENU” appears on the display.  
G Press the or button : repeat-  
edly until “24 H MODE” or “12 H  
MODE” appears on the display.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TONE AND VOLUME BALANCE  
Setting the volume distribution  
left/right (balance)  
Tone and volume balance  
You can adjust the tone and volume  
balance separately for every audio  
source (radio, CD, CD changer, AUX  
and traffic announcements).  
G To set the volume distribution left/  
right (balance), press the AUDIO  
= button.  
Note:  
“BASS” appears on the display.  
G Adjustments to tone and volume  
balance for traffic announcements  
can only be made during a traffic  
announcement.  
G Press the button : repeatedly  
until “BALANCE” appears on the  
display.  
G Press the or button : to set  
Adjusting the bass  
the volume distribution left/right.  
G Press the AUDIO = button.  
“BASS” appears on the display.  
G Press the AUDIO = button once  
you have completed the setting.  
G Press the or button : to set  
Setting the volume distribution  
front/rear (fader)  
the bass.  
G Press the AUDIO = button once  
G To set the volume distribution front/  
rear (fader), press the AUDIO =  
button.  
you have completed the setting.  
Adjusting the treble  
“BASS” appears on the display.  
G Press the AUDIO = button.  
“BASS” appears on the display.  
G Press the button : repeatedly  
until “FADER” appears on the dis-  
play.  
G Press the button : repeatedly  
until “TREBLE” appears on the dis-  
play.  
G Press the or button : to set  
the volume distribution front/rear.  
G Press the or button : to set  
G Press the AUDIO = button once  
the treble.  
you have completed the setting.  
G Press the AUDIO = button once  
you have completed the setting.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
X-BASS  
X-BASS  
LEVEL INDICATOR  
Setting the level indicator  
X-Bass means increased bass at low The level indicator (spectrometer) on  
volumes.  
your display briefly indicates the volume,  
tone and equalizer settings with sym-  
bols on your display as you make the  
corresponding settings.  
Note:  
G X-BASS can be adjusted separate-  
ly for each audio source (radio, CD,  
CD-changer and AUX).  
When settings are not being made, the  
spectrometer indicates the original lev-  
el of the car radio.  
You can also set the type of spectromet-  
er on your menu.  
Setting X-BASS boost  
The X-BASS boost can be increased in  
steps from 1 to 3.  
There are two types available.  
“X-BASS-OFF” means the function is  
switched off.  
Selecting a spectrometer type  
G Press the MENU button 8.  
“MENU” appears on the display.  
G Press the X-BASS button <  
G Press the or button : until  
the desired setting appears in the  
display.  
G Press the or button : repeat-  
edly until “EQ DISPLAY” appears  
on the display.  
When setting is complete  
G Press the X-BASS button <.  
G Press the or button : to  
choose between displaying  
“SPECTRUM 1” and “SPECTRUM2”  
or “EQ DISP OFF” set the volume  
distribution left/right.  
G Press the MENU button 8 or OK  
; twice, once you have complet-  
ed the setting.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
EXTERNAL AUDIO SOURCES  
External audio sources  
TECHNICAL DATA  
Technical data  
In place of the CD changer it is also  
possible to connect other external au-  
dio sources to the line output. These  
sources can include a portable CD play-  
er, MiniDisc player or MP3 player.  
The AUX output has to be switched on  
in the install menu.  
To connect up an external audio source,  
you will need an adapter cable, obtain-  
able from any authorised Blaupunkt  
dealer.  
Amplifier  
Output power:  
4 x 25 watts sine  
in accordance  
with DIN 45 324 at  
14.4V,  
4 x 45 watts max.  
power  
Tuner  
Frequency ranges:  
FM :  
MW :  
LW :  
87.5 - 108 MHz  
531 - 1 602 kHz  
153 - 279 kHz  
Switching the AUX input on/off  
G Press the MENU button 8.  
“MENU” appears on the display.  
(München CD51 does not feature  
MW and LW)  
G Press the or button : repeat-  
edly until “AUX-IN-1 OFF” or “AUX-  
IN-1 ON” appears on the display.  
FM transmission range:  
35 - 16 000 Hz  
G Press the or button : to  
switch AUX on or off.  
CD  
G Press the MENU button 8 or OK  
; once you have completed the  
setting.  
Transmission range:  
20 - 20 000 Hz  
Note:  
Pre-amp output  
4 channels:  
When the AUX input is switched on, it  
can be selected using the CD•C button  
@.  
3 V  
Input sensitivity:  
AUX 1 input  
: 2 V / 6 k  
Tel-/Navi input  
: 10 V / 1 kΩ  
Subject to changes!  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUARANTEE  
Guarantee  
The scope of the guarantee complies  
with the legal provisions applicable in  
the country in which the unit was bought.  
Should your car radio prove to be de-  
fective, please contact your dealer, pre-  
senting proof of purchase.  
If the legal guarantee period in your  
country is less than 12 months, Blau-  
punkt grants a 12-month manufacturer's  
guarantee. Not covered by such guar-  
antee are damage caused by wear and  
tear, improper use or commercial use.  
In order to claim the Blaupunkt manu-  
facturer's guarantee, please send in the  
defective unit along with proof of pur-  
chase to the central Blaupunkt after-  
sales department in your country. You  
can find out which is the nearest ad-  
dress to you by calling the telephone  
hotline printed on the back of this man-  
ual. Blaupunkt reserves the right to re-  
pair or replace the defective unit at its  
discretion.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Billy Goat Vacuum Cleaner KV600FB User Manual
Black Decker Cordless Sander Catalog Number DS321 User Manual
Black Decker Electric Heater OR07C User Manual
Black Decker TV Cables CM047 SRVC 2 User Manual
Bolens Tiller 215 418 000 User Manual
Bosch Appliances Clothes Dryer WTMC1501UC User Manual
Bosch Power Tools Grinder DG250C User Manual
Butler Coffeemaker 645 061 User Manual
Canon Printer C3380 Series User Manual
Char Broil Gas Grill 463620412 User Manual