FAX 580MC
MFC 660MC
®
Download from Www.Somanuals.com. All Manuals Search And Download.
Brother Numbers
Brother fax-back system
Brother Customer Service has installed an easy-to-use fax-back system, so you can get
instant answers to common technical questions and product information for all Brother
products. This system is available 24 hours a day, 7 days a week. You can use the
system to send faxes to any fax machine, not just the one from which you are calling.
If you can’t resolve difficulty with your FAX/MFC using this manual, call our fax-back
system, and follow the voice prompts to receive faxed instructions about using the
system, and an index of fax-back subjects.
USA:
1-800-521-2846
From within Canada: 1-800-681-9838
The Brother fax-back system number (USA only) has been preprogrammed on One
Touch key 1.
Frequently Asked Questions (FAQs)
You can find more information about Brother products on the World Wide Web. From
product specification sheets to Frequently Asked Questions (FAQs), it is all there.
Visit us at:
http://www.brother.com
Brother Bulletin Board
Brother’s Bulletin Board Numbers are
USA:
1-888-298-3616
From within Canada: 1-514-685-2040
For Customer Service
USA:
1-800-284-4329 (voice)
1-908-575-8790 (fax)
From within Canada: 1-800-853-6660 (voice)
1-514-685-4898 (fax)
From within Montreal: 1-514-685-6464 (voice)
B R O T H E R N U M B E R S
Download from Www.Somanuals.com. All Manuals Search And Download.
i
Ordering Accessories and Supplies
For the best quality results use only genuine Brother accessories, available at most
Brother retailers. If you cannot find the accessory you need and you have a Visa,
Master Card, Discover or American Express credit card, you can order accessories
directly from Brother.
USA:
1-888-879-3232 (voice)
1-800-947-1445 (fax)
From within Canada: 1-800-668-2768 (voice)
DESCRIPTION
ITEM
Thermal Print Cartridge
PC401
2-PK Refill Ribbon Rolls
Telephone Line Cord
PC402RF
Tell the Brother Representative your Model
number so you get the appropriate color.
Telephone Handset
Handset Curled Cord
Tell the Brother Representative your Model
number so you get the appropriate color.
Tell the Brother Representative your Model
number so you get the appropriate color.
Paper Wire Extension
Output Paper Support
Paper Tray
UF9869001
LE4129001
LE4126001
LE4171001
QPD 120
Owner’s Manual
Surge Protection Device with Telephone
Line Protection (2 outlets)
Surge Protection Device with Telephone
Line Protection (8 outlets)
FX 120
®
Multi-function Link option on Floppy
MFL-2D31
MFL-2D95
®
Disks for Windows 3.1, 3.11
®
Multi-function Link option on Floppy
®
Disks for Windows 95
ii
O R D E R I N G A C C E S S O R I E S A N D S U P P L I E S
Download from Www.Somanuals.com. All Manuals Search And Download.
Notice – Disclaimer of Warranties
(For USA and Canada)
BROTHER’S LICENSOR(S), AND THEIR DIRECTORS, OFFICERS, EMPLOYEES OR
AGENTS (COLLECTIVELY BROTHER’S LICENSOR) MAKES NO WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING
THE SOFTWARE. BROTHER’S LICENSOR(S) DOES NOT WARRANT, GUARANTEE OR
MAKE ANY REPRESENTATIONS REGARDING THE USE OR THE RESULTS OF THE USE
OF THE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY,
CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND
PERFORMANCE OF THE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF
IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES IN THE USA AND SOME
PROVINCES IN CANADA. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.
IN NO EVENT WILL BROTHER’S LICENSOR(S) BE LIABLE TO YOU FOR ANY
CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR
LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS
INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE
SOFTWARE EVEN IF BROTHER’S LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY
OF SUCH DAMAGES. BECAUSE SOME STATES IN THE USA AND SOME PROVINCES IN
CANADA DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR
CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU. IN ANY EVENT BROTHER’S LICENSOR’S LIABILITY TO YOU FOR
ACTUAL DAMAGES FROM ANY CAUSE WHATSOEVER, AND REGARDLESS OF THE
FORM OF THE ACTION (WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE),
PRODUCT LIABILITY OR OTHERWISE), WILL BE LIMITED TO $50.
Compilation and Publication Notice
Under the supervision of Brother Industries, Ltd., this manual has been compiled
and published, covering the latest product descriptions and specifications.
The contents of this manual and the specifications of this product are subject to
change without notice.
Brother reserves the right to make changes without notice in the specifications and
materials contained herein and shall not be responsible for any damages (including
consequential) caused by reliance on the materials presented, including but not
limited to typographical and other errors relating to the publication.
Trademarks
The Brother logo is a registered trademark of Brother Industries, Ltd.
Brother is a registered trademark of Brother Industries, Ltd.
IBM, IBM PC, MWAVE and IBM Aptiva are registered trademarks of International
Business Machines Corporation.
ScanSoft PaperPort is a registered trademark of ScanSoft, Inc.
Microsoft and MS-DOS are registered trademarks of Microsoft Corporation.
Windows and Windows NT are registered trademarks of Microsoft in the U.S. and
other countries.
All other terms and brand and product names mentioned in this manual are
registered trademarks of their respective companies.
N O T I C E
–
D I S C L A I M E R O F W A R R A N T I E S
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
BROTHER 90 DAY LIMITED WARRANTY and EXCHANGE SERVICE
(For FAX 580MC Only)
(For USA Only)
This warranty gives you certain rights
and you may also have other rights that
may vary from state to state.
may be required to deliver or send the
Product properly packaged, freight
prepaid, to the Authorized Service
Center together with a photocopy of
your bill of sale.
This warranty is given only to the first
end-use
purchaser
of
the
accompanying product (referred to in
this warranty as “this Product”).
What Brother will do: Brother (or its
Authorized Service Center) will
evaluate your report of a possible
defect to determine whether a defect
exists, and if it does exist, Brother (or its
Authorized Service Center) will repair or
(at Brother’s option) replace the
Product with a product that performs
the same functions and performs as
well as the original Product. Brother
reserves the right to supply refurbished
or remanufactured replacement parts
provided that the replacement parts
What is covered: Brother warrants to
you for the Warranty Period that there
are no defects in the materials,
workmanship or Year 2000 compliance
of this Product. The “Warranty Period”
is 90 days from the date you purchased
this product. The “Warranty Period” for
consumable items, such as Toner,
Drums, Ribbons, etc. is 90 days from
the date of purchase, or the rated life of
the Consumable item, whichever is
shorter.
conform
to
the
manufacturer’s
specifications for new products. The
repaired or replacement product will be
returned to you at no cost.
What is NOT covered: This warranty is
VOID -- that is, this Product has no
warranty -- if: (1) you did not purchase
this Product from an authorized Brother
reseller within the United States, (2) this
Product has been serviced, modified or
tampered with by anyone other than an
Authorized Service Representative of
Brother, (3) the serial number has been
modified, defaced or removed from this
Product, (4) this Product has been
Exchange Service:
When an exchange is authorized,
Brother will exchange your non-working
product with
a
refurbished or
remanufactured product that conforms
to the manufacturer’s specifications for
new products.
The refurbished or
remanufactured Product you receive
will be covered by the balance of the
limited warranty period remaining on
the original Product, plus an additional
thirty (30) days. You will keep the
replacement Product that is sent to you
and must return (or be billed up to the
cost of a new product) your original
non- working product, which shall
become the property of Brother. You
must call Brother Customer Service and
if the representative cannot correct the
®
abused or damaged, (5) non Brother -
brand or non Brother approved parts,
supplies, power supplies or other
accessories have been used with this
Product, or (6) this Product has been
transported
without
the
proper
preparation and packaging.
What to do if you think your Product
is defective:
Call our Customer Service Hotline at 1-
800-284-4329, or if you suspect a
defect in materials or workmanship in
this Product, you can report it to a
Brother Authorized Service Center.
During the Warranty Period, supply
Brother’s representative with a copy of
your dated bill of sale showing that this
Product was purchased within the
United States. For the name of your
Brother Authorized Service Center, call
1-800-521-2846. After contacting the
Brother Authorized Service Center, you
product’s
malfunction
over
the
telephone and you elect the exchange
service, you must provide information
pertaining to this Product and you must
also provide a valid major credit card
number.
Your credit card will be
charged up to the cost of a new Product
if: (i) you do not return your original
Product to Brother within five (5)
business days; (ii) the malfunctions of
your original Product are not covered by
the limited warranty; (iii) the proper
F A X L I M I T E D W A R R A N T Y
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
BROTHER 90 DAY LIMITED WARRANTY and EXCHANGE SERVICE
(For FAX 580MC Only)
(For USA Only)
packaging instructions are not followed
and has caused damage to the product;
or (iv) the warranty period on your
original Product has expired or has not
been sufficiently validated with a copy
of the proof of purchase (bill of sale).
Brother’s obligations to you. It replaces
all other agreements and under-
standings that you may have with
Brother or its representatives.
This Limited Warranty (and Brother’s
obligation to you) may not be changed
in any way unless you and Brother sign
the same piece of paper in which we (1)
refer to this Product and your bill of sale
date, (2) describe the change to this
warranty and (3) agree to make that
change.
The
Brother
Customer
Service
Representative will ship the exchange
Product via next business day delivery
courier service, with return instructions
and prepaid return air bill. Follow the
return instructions. You must return the
original Product in the same shipping
carton in which the exchanged Product
was received and include a copy of
proof of purchase (bill of sale). Retain
your original accessory items and a
copy of the return air bill, signed by the
courier.
Product Support: Toll-free customer
service and technical support is
available for hardware operational
assistance at 1-800-284-4329. At any
time, free technical support in the form
of Frequently Asked Questions,
troubleshooting tips and service center
locator is available through our fax-back
system at 1-800-521-2846 or Brother’s
Internet Web Site (www.brother.com).
Now you can visit us on-line
Limitations:
Repair or replacement as described
above is your sole and exclusive (that
is, your only) remedy if this Product is
defective. Brother is not responsible for
damage to or loss of any equipment,
media, programs or data related to the
use of this Product. Except for that
repair or replacement, Brother shall not
be liable for any direct, indirect,
incidental or consequential damages or
specific relief. Because some states do
not allow the exclusion or limitation of
consequential or incidental damages,
the above limitation may not apply to
you.
(www.brothermall.com) , your complete
source for genuine Brother Accessories
and Supplies.
BROTHER INTERNATIONAL CORPORATION
100 SOMERSET CORPORATE BLVD.
BRIDGEWATER, NEW JERSEY 08807-0911
Please record your model and serial
numbers and your date and location of
Purchase below for your records. Keep
this information with your proof of
purchase (bill of sale) in case your
Product is lost, stolen or requires
service.
THIS WARRANTY IS GIVEN IN LIEU
OF ALL OTHER WARRANTIES,
WRITTEN OR ORAL, WHETHER
EXPRESSED BY AFFIRMATION,
Model # _______________________
Serial #________________________
Date of purchase: _______________
Store where purchased:___________
Location of store: ________________
PROMISE,
DESCRIPTION,
DRAWING, MODEL OR SAMPLE.
ANY AND ALL WARRANTIES OTHER
THAN
THIS
ONE,
WHETHER
EXPRESS OR IMPLIED, INCLUDING
IMPLIED WARRANTIES OF
Important: We recommend that you
keep all original packing materials, in
the event that you ship this product.
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED.
This Limited Warranty is the only
warranty that Brother is giving for this
Product. It is the final expression and
the exclusive and only statement of
F A X L I M I T E D W A R R A N T Y
Download from Www.Somanuals.com. All Manuals Search And Download.
v
BROTHER ONE YEAR LIMITED WARRANTY and EXCHANGE SERVICE
(For MFC 660MC Only)
(For USA Only)
This warranty gives you certain rights
and you may also have other rights that
may vary from state to state.
may be required to deliver or send the
Product properly packaged, freight
prepaid, to the Authorized Service
Center together with a photocopy of
your bill of sale.
This warranty is given only to the first
end-use
purchaser
of
the
accompanying product (referred to in
this warranty as “this Product”).
What Brother will do: Brother (or its
Authorized Service Center) will
evaluate your report of a possible
defect to determine whether a defect
exists, and if it does exist, Brother (or its
Authorized Service Center) will repair or
(at Brother’s option) replace the
Product with a product that performs
the same functions and performs as
well as the original Product. Brother
reserves the right to supply refurbished
or remanufactured replacement parts
provided that the replacement parts
What is covered: Brother warrants to
you for the Warranty Period that there
are no defects in the materials,
workmanship or Year 2000 compliance
of this Product. The “Warranty Period”
is 1 year from the date you purchased
this product. The “Warranty Period” for
consumable items, such as Toner,
Drums, Ribbons, etc. is 90 days from
the date of purchase, or the rated life of
the Consumable item, whichever is
shorter.
conform
to
the
manufacturer’s
specifications for new products. The
repaired or replacement product will be
returned to you at no cost.
What is NOT covered: This warranty is
VOID -- that is, this Product has no
warranty -- if: (1) you did not purchase
this Product from an authorized Brother
reseller within the United States, (2) this
Product has been serviced, modified or
tampered with by anyone other than an
Authorized Service Representative of
Brother, (3) the serial number has been
modified, defaced or removed from this
Product, (4) this Product has been
Exchange Service:
When an exchange is authorized,
Brother will exchange your non-working
product with
a
refurbished or
remanufactured product that conforms
to the manufacturer’s specifications for
new products. The refurbished or
remanufactured Product you receive
will be covered by the balance of the
limited warranty period remaining on
the original Product, plus an additional
thirty (30) days. You will keep the
replacement Product that is sent to you
and must return (or be billed up to the
cost of a new product) your original
non- working product, which shall
become the property of Brother. You
must call Brother Customer Service and
if the representative cannot correct the
®
abused or damaged, (5) non Brother -
brand or non Brother approved parts,
supplies, power supplies or other
accessories have been used with this
Product, or (6) this Product has been
transported
without
the
proper
preparation and packaging.
What to do if you think your Product
is defective:
Call our Customer Service Hotline at
1-800-284-4329, or if you suspect a
defect in materials or workmanship in
this Product, you can report it to a
Brother Authorized Service Center.
During the Warranty Period, supply
Brother’s representative with a copy of
your dated bill of sale showing that this
Product was purchased within the
United States. For the name of your
Brother Authorized Service Center, call
1-800-521-2846. After contacting the
Brother Authorized Service Center, you
product’s
malfunction
over
the
telephone and you elect the exchange
service, you must provide information
pertaining to this Product and you must
also provide a valid major credit card
number. Your credit card will be
charged up to the cost of a new Product
if: (i) you do not return your original
Product to Brother within five (5)
business days; (ii) the malfunctions of
your original Product are not covered by
the limited warranty; (iii) the proper
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
BROTHER ONE YEAR LIMITED WARRANTY and EXCHANGE SERVICE
(For MFC 660MC Only)
(For USA Only)
packaging instructions are not followed
and has caused damage to the product;
or (iv) the warranty period on your
original Product has expired or has not
been sufficiently validated with a copy
of the proof of purchase (bill of sale).
Brother’s obligations to you. It replaces
all other agreements and under-
standings that you may have with
Brother or its representatives.
This Limited Warranty (and Brother’s
obligation to you) may not be changed
in any way unless you and Brother sign
the same piece of paper in which we (1)
refer to this Product and your bill of sale
date, (2) describe the change to this
warranty and (3) agree to make that
change.
The
Brother
Customer
Service
Representative will ship the exchange
Product via next business day delivery
courier service, with return instructions
and prepaid return air bill. Follow the
return instructions. You must return the
original Product in the same shipping
carton in which the exchanged Product
was received and include a copy of
proof of purchase (bill of sale). Retain
your original accessory items and a
copy of the return air bill, signed by the
courier.
Product Support: Toll-free customer
service and technical support is
available for hardware operational
assistance at 1-800-284-4329. At any
time, free technical support in the form
of Frequently Asked Questions,
troubleshooting tips and service center
locator is available through our fax-back
system at 1-800-521-2846 or Brother’s
Internet Web Site (www.brother.com).
Now you can visit us on-line
(www.brothermall.com), your complete
source for genuine Brother Accessories
and Supplies.
Limitations:
Repair or replacement as described
above is your sole and exclusive (that
is, your only) remedy if this Product is
defective. Brother is not responsible for
damage to or loss of any equipment,
media, programs or data related to the
use of this Product. Except for that
repair or replacement, Brother shall not
be liable for any direct, indirect,
incidental or consequential damages or
specific relief. Because some states do
not allow the exclusion or limitation of
consequential or incidental damages,
the above limitation may not apply to
you.
BROTHER INTERNATIONAL CORPORATION
100 SOMERSET CORPORATE BLVD.
BRIDGEWATER, NEW JERSEY 08807-0911
Please record your model and serial
numbers and your date and location of
Purchase below for your records. Keep
this information with your proof of
purchase (bill of sale) in case your
Product is lost, stolen or requires
service.
THIS WARRANTY IS GIVEN IN LIEU
OF ALL OTHER WARRANTIES,
WRITTEN OR ORAL, WHETHER
EXPRESSED BY AFFIRMATION,
Model # _______________________
Serial #________________________
Date of purchase: _______________
Store where purchased:___________
Location of store: ________________
PROMISE,
DESCRIPTION,
DRAWING, MODEL OR SAMPLE.
ANY AND ALL WARRANTIES OTHER
THAN
THIS
ONE,
WHETHER
EXPRESS OR IMPLIED, INCLUDING
IMPLIED WARRANTIES OF
Important: We recommend that you
keep all original packing materials, in
the event that you ship this product.
MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE, ARE
HEREBY DISCLAIMED.
This Limited Warranty is the only
warranty that Brother is giving for this
Product. It is the final expression and
the exclusive and only statement of
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
BROTHER MULTIFUNCTION CENTER/FACSIMILE MACHINE
LIMITED WARRANTY
(For Canada Only)
Pursuant to this limited warranty of 1 year from the date of purchase for labour and parts,
Brother International Corporation (Canada) Ltd. (“Brother”), or its Authorized Service
Centers, will repair this MFC/Facsimile machine free of charge if defective in material or
workmanship. This Limited Warranty does not include cleaning, consumables
(including, without limitation, print cartridges, print head, toner and drum) or damage
caused by accident, neglect, misuse or improper installation or operation, any damage
caused from service, maintenance, modifications, or tampering by anyone other than a
Brother Authorized Service Representative, or from the use of supplies or consumable
items that are non-Brother products. Operation of the MFC/Facsimile machine in excess
of the specifications or with the Serial Number or Rating Label removed shall be deemed
abuse and all repairs thereafter shall be the sole liability of the end-user/purchaser. In
order to obtain warranty service, the MFC/Facsimile machine must be delivered or
shipped freight prepaid by the end user/purchaser to a “Brother” Authorized Service
Center, together with your Proof of Purchase in the form of a Sales Receipt.
For laser products: Failure to remove the Toner Cartridge (and Toner Drum Unit on
applicable models) during shipping will cause severe damage to the MFC/Facsimile and
will VOID the Warranty. (Refer to your Operation Manual for proper packaging.)
For ink-jet products: Do not remove the ink cartridges during shipping. Damage to your
print head resulting from packing without the ink cartridges will VOID your warranty.
(Refer to your Operation Manual for proper packaging.)
BROTHER DISCLAIMS ALL OTHER WARRANTIES EXPRESSED OR IMPLIED
INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, EXCEPT TO
THE EXTENT THAT ANY WARRANTIES IMPLIED BY LAW CANNOT BE VALIDLY
WAIVED.
No oral or written information, advice or representation provided by Brother, its
Authorized Service Centers, Distributors, Dealers, Agents or employees, shall create
another warranty or modify this warranty. This warranty states Brother’s entire liability
and your exclusive remedy against Brother for any failure of the MFC/Facsimile machine
to operate properly.
Neither Brother nor anyone else involved in the development, production, or delivery of
this MFC/Facsimile machine shall be liable for any indirect, incidental, special,
consequential, exemplary, or punitive damages, including lost profits, arising from the
use of or inability to use the product, even if advised by the end user/purchaser of the
possibility of such damages. Since some Provinces do not allow the above limitation of
liability, such limitation may not apply to you.
This Limited Warranty gives you specific legal rights and you may also have other rights
which vary from Providence to Providence.
Warranty Service is available at Brother Authorized Service Centers throughout
Canada. For Technical Support or for the name and location of your nearest
Authorized Service Center call 1-800-853-6660. Within Montreal, please call 685-6464.
Internet support: [email protected] or browse
Brother’s Web Site: www.brother.com
Brother International Corporation (Canada) Ltd.
1 Rue Hôtel de Ville
We’re at your side.
Dollard-Des-Ormeaux, QC H9B 3H6
®
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Introduction..................................................................................... 1-1
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Receive................................................................................... 5-1
x
Download from Www.Somanuals.com. All Manuals Search And Download.
(For MFC 660MC Only)................................................... 5-7
xi
Download from Www.Somanuals.com. All Manuals Search And Download.
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing On-Line Documentation............................................ 14-6
®
15
®
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
®
16
(For FAX 580MC Only) ............................................................. 16-1
Index..................................................................................................I-1
19
xv
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Introduction
1
Using This Manual
Thank you for purchasing a Brother FAX/MFC. This FAX/MFC has been designed to
be simple to use, with LCD screen prompts to guide you through functions. However,
you can use your FAX/MFC to its fullest potential by taking a few minutes to read this
manual.
Additionally, your FAX/MFC has a Help Key. Press Copy/Help and then press
Start to print a list of basic operational steps and functions.
Finding Information
All chapter headings and subheadings are listed in the Table of Contents. You will be
able to find information about a specific feature or function by checking the Index at
the back of this manual. Also, throughout this manual, you’ll see special symbols
alerting you to important information, cross-references, and warnings. Illustrations of
some screen displays also help you choose the correct key-presses.
About FAX/MFC
If you’re a first-time FAX/MFC user, fax operation might seem a little mysterious.
You’ll soon get used to the unusual fax tones on your phone line, and be able to send
and receive faxes easily.
1 - 1
I N T R O D U C T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
Fax Tones and Handshake
When someone is sending a fax, the FAX/MFC sends fax calling tones (CNG tones)—
soft, intermittent beeps at 4-second intervals. You’ll hear them when you dial and
press Start, and they continue for about 40 seconds after dialing. During that time, the
sending machine must begin the “handshake” with the receiving machine. Each time
you use automatic procedures to send a fax, you are sending CNG tones over the phone
line. You’ll soon learn to listen for these soft beeps each time you answer a phone on
your fax line, so you know if you are receiving a fax message.
The receiving fax responds with fax receiving tones—loud, chirping sounds. A
receiving fax chirps for about 40 seconds over the phone line, and the screen displays
RECEIVE. If your FAX/MFC is set to the FAX ONLY Mode, it will answer every
call automatically with fax receiving tones. Even if the other party hangs up, your
FAX/MFC continues to send the “chirps” for about 40 seconds, and the screen
continues to display “RECEIVE”. To cancel the receiving mode, press Stop.
When your FAX/MFC answers in FAX/TEL Mode, the FAX/MFC listens for CNG
tones and then responds with receiving tones.
The fax “handshake” is the time in which the sending machine’s CNG tones and the
receiving machines “chirps” overlap. This must be for at least 2 to 4 seconds, so the
machines can understand how each is sending and receiving the fax. The handshake
cannot begin until the call is answered, and the CNG tones only last for about 40
seconds after the number is dialed. Therefore, it’s important for the receiving machine
to answer the call in as few rings as possible.
When you have an external telephone answering device (TAD) on your fax line, your
TAD will determine the number of rings before the call is answered. Pay special
attention to the directions in the Installation chapter for connecting a TAD to your
FAX/MFC.
ECM (Error Correction Mode)
The Error Correction Mode (ECM) is a way for the FAX/MFC to check the integrity
of a fax transmission while it is in progress. ECM transmissions are possible only
between machines that both have the ECM feature. If they do, you may send and
receive fax messages that are continuously checked for their integrity.
Sufficient memory must be available in your FAX/MFC for this feature to work.
I N T R O D U C T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
1 - 2
FAX 580MC and MFC 660MC
Control Panel Overview
18
17
16
15
1
SIX IN ONE
14
13
2
3
4
5
12
6
7
8
9
10
11
1 LCD (Liquid Crystal
Display)
7 One Touch Dial Keys
13 Function/Set
Lets you access the
function and
These four keys give you
instant access to
Displays messages to help
previously stored phone
numbers.
you set up and
programming mode.
Also, stores a function
setting into the fax
machine.
operate your fax machine.
8 Stop
2 Hold/Caller ID
Stops a fax, cancels an
operation or exits from
Function mode.
Lets you put calls on hold.
Also, lets you view or
print the Caller ID list.
14
(Left Arrow)
(Right Arrow)
Volume
Moves the LCD cursor to
the left or right. Adjusts
speaker, ring and handset
volume.
3 Redial/Pause
9 Mode
Re-dials the last number
called. Also inserts a
pause in autodial numbers.
Use to select how fax
machine will handle
incoming calls.
15 Microphone
4 Search/Speed Dial
Lets you dial stored phone
numbers by pressing #
and a two-digit number.
Also lets you look up
numbers stored in the
dialing memory.
10 Copy/Help
Picks up your voice when
you speak to another party
using speakerphone.
Makes a copy. If no
originals are in the
ADF, it prints a quick
reference Help List.
16 MC ON/OFF
Lets you activate the
Message Center.Also,notifies
you that you have voice or
fax messages in the memory.
11 Start
Starts an operation, such
as sending a fax.
5 Speaker Phone
Lets you speak to the
person at the other end
and dial telephone
numbers without lifting
the handset.
17 Play/Record
Lets you listen to voice
messages and print fax
messages stored in
memory.
12 Resolution
Sets the resolution when
you send a fax or make a
copy.
Also, lets you record
telephone calls.
6 Dial Pad
Dials phone and fax
numbers, and can be used
as a keyboard for entering
information into the fax
machine.
18 Erase
Lets you delete voice
messages, fax messages or
all messages.
1 - 3
I N T R O D U C T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Location and Connections
2
Caution
1
2
Never install telephone wiring during a lightning storm.
We recommend that this product be used with a surge protection device to protect the
product against lightning storms.
3
4
Never install a telephone jack in a wet location unless the jack is specifically designed
for a wet location.
Never touch telephone wires or terminals that are not insulated unless the telephone
line has been disconnected at the network interface.
5
6
Use caution when installing or modifying telephone lines.
Avoid using a telephone (other than a cordless type) during an electrical storm. There
may be a remote risk of electric shock from lightning.
7
8
Do not use the telephone to report a gas leak in the vicinity of the leak.
For PLUGGABLE EQUIPMENT, the electrical outlet should be installed near the
equipment and should be easily accessible.
Choosing a Location
Place your FAX/MFC on a flat, stable surface, such as a desk. Select a place that is
free of vibration and shocks. Locate the FAX/MFC near a telephone jack and a
standard, grounded power outlet.
Avoid placing your machine in a high-traffic area. Do not place near heaters, air
conditioners, water, chemicals or refrigerators. Do not expose the FAX/MFC to direct
sunlight, excessive heat, moisture or dust. Do not connect your machine to electrical
outlets controlled by wall switches or automatic timers. Disruption of power can wipe
out information in the unit’s memory. Do not connect your machine to electrical
outlets on the same circuit as large appliances or other equipment that might disrupt
the power supply. Avoid interference sources, such as speakers or the base units of
cordless phones.
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - 1
Packing List
Make sure you have the following items:
Paper
Wire Extension
Telephone
Line Cord
Paper Tray
Telephone
Handset
One Touch
Name Label
Handset
Curled Cord
Output Paper
Support
Owner’s
Manual
Multi Function
Link CD-ROM
Brother
Start Card
(For MFC 660MC
Only)
Cable and
PC/IF Box
(For MFC 660MC
Only)
If an item is missing, call Brother Customer Service at
Note
1-800-284-4329 (USA), 1-800-853-6660 (from within Canada) or 1-514-685-6464
correct item numbers.
Whenever you transport the FAX/MFC, use the packing materials that came with
your machine. If you do not pack the FAX/MFC correctly, you may void your
warranty.
Assembly
Attach the paper wire extension
Attach the paper wire extension to the
paper tray and slide it up or down to fit
letter or legal size paper.
Paper Wire
Extension
2 - 2
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Attach the paper tray
Attach the paper tray. Make sure the wide
pins on the paper tray are inserted firmly
into the pockets on the top edge of the
machine.
Paper Tray
Attach the output paper support
Attach the output paper support.
Output
Paper
Support
Loading the Paper
The maximum number of 20 lb. sheets you can load depends on the paper size, either
50 Letter or 30 Legal.
Temperature:
Humidity:
68˚F (20˚C)
60%
1
Place paper in the paper tray.
Tap the stack of paper
so the edges are even.
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - 3
Acceptable Paper
Size:
Letter and Legal
17 lb. – 24 lb.
Weight:
Thickness: .0031 inches – .0039 inches
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.
Connections
Connecting the Machine
Connect the handset, power cord, and telephone line.
1
Connect the Handset.
Connect the curled handset cord to the bottom of the handset and the back of the
machine.
2
3
Connect the power cord.
Connect the telephone line.
Connect one end of the telephone line cord to the jack labeled LINE on the back of
the machine. Connect the other end to a modular wall jack.
2 - 4
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
■ This machine must be grounded using a three-prong plug.
■ Since the machine is grounded through the power outlet, you can protect yourself from
potentially hazardous electrical conditions on the telephone line by keeping the power
to your machine on when you connect it to a telephone line. When you want to move
your machine, protect yourself by disconnecting the telephone line first, and then the
power cord.
■ Lightning and power surges can damage this product! We recommend that you use a
quality surge protection device on the AC power line as well as on the telephone line,
or unplug the lines during a lightning storm.
Special Line Considerations
Roll Over Phone Lines
A roll over phone system is a group of two or more separate telephone lines that pass
incoming calls to each other if they are busy. The calls are usually passed down or
“rolled over” to the next available phone line in a preset order.
Your FAX/MFC can work in a roll over system as long as it is the last number in the
sequence, so the call cannot roll away. Do not put the FAX/MFC on any of the other
numbers; when the other lines are busy and a second fax call is received, the fax call
is transferred to a line that does not have a fax machine. Your FAX/MFC will work
best on a dedicated line.
Two-Line Phone System
A two-line phone system is nothing more than two separate phone numbers on the
same wall outlet. The two phone numbers can be on separate jacks (RJ11) or combined
into one jack (RJ14). Your machine must be plugged into an RJ11 jack. RJ11 and RJ14
jacks may be equal in size and appearance and both may contain four wires (black, red,
green, yellow). To test the type of jack, plug in a two-line phone and see if it can access
both lines. If it can, you must separate the line for your machine.
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - 5
Converting Telephone Wall Outlets
There are three ways to convert to an RJ11 receptacle. The first two ways may require
assistance from the telephone company. You can change the wall outlets from one
RJ14 jack to two RJ11 jacks. Or, you can have an RJ11 wall outlet installed and slave
or jump one of the phone numbers to it.
The third way is the easiest: Buy a triplex adapter. You can plug a triplex adapter into
an RJ14 outlet. It separates the wires into two separate RJ11 jacks (Line 1, Line 2) and
a third RJ14 jack (Lines 1 and 2). If your Brother machine is on Line 1, plug the
machine into L1 of the triplex adapter. If your machine is on Line 2, plug it into L2 of
the triplex adapter.
Triplex Adapter
RJ14
RJ11
RJ14
Installing Brother Machine, External Two-Line TAD, and Two-Line
Telephone
When you are installing an external two-line telephone answering device (TAD) and
a two-line telephone, your machine must be isolated on one line at both the wall jack
and at the TAD. The most common connection is to put the Brother machine on Line
2, which is our assumption in the following steps. The back of the two-line TAD must
have two telephone jacks: one labeled L1 or L1/L2, and the other labeled L2. You will
need at least three telephone line cords, the one that came with your machine and two
for your external two-line TAD. You will need a fourth line cord if you add a two-line
telephone.
1
2
Place the two-line TAD and two-line telephone next to your Brother machine.
Plug one end of the telephone line cord for your machine into the L2 jack of the triplex
adapter. Plug the other end into the LINE jack on the back of the machine.
3
Plug one end of the first telephone line cord for your TAD into the L1 jack of the
triplex adapter. Plug the other end into the L1 or L1/L2 jack of the two-line TAD.
2 - 6
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Plug one end of the second telephone line cord for your TAD into the L2 jack of the
two-line TAD. Plug the other end into the EXT. jack on the back of the machine.
Triplex Adapter
Two Line Phone
Two Line External TAD
Brother Machine
You can keep two-line telephones on other wall outlets as always. There are two ways
to add a two-line telephone to the FAX/MFC’s wall outlet. You can plug the telephone
line cord from the two-line telephone into the L1+L2 jack of the triplex adapter. Or,
you can plug the two-line telephone into the TEL jack of the two-line TAD.
Multi-Line Connections (PBX)
Most offices use a central telephone system. While it is often relatively simple to
connect the FAX/MFC to a key system or a PBX (Private Branch Exchange), we
suggest that you contact the company that installed your telephone system and ask
them to connect the FAX/MFC for you. It is advisable to have a separate line for the
FAX/MFC. You can then leave the FAX/MFC in FAX ONLY Mode to receive faxes
any time, day or night.
If the FAX/MFC is to be connected to a multi-line system, ask your installer to connect
the unit to the last line on the system. This prevents the unit from being activated each
As with all fax units, this machine must be connected to a two wire system. If your
line has more than two wires, proper connection of the FAX/MFC cannot be made.
If you are installing the FAX/MFC to work with a PBX:
1
2
3
It is not guaranteed that the unit will operate correctly under all circumstances with a
PBX. Any cases of difficulty should be reported first to the company that handles your
PBX.
If all incoming calls will be answered by a switchboard operator, it is recommended
that the Answer Mode be set to MANUAL. All incoming calls should initially be
regarded as telephone calls.
The unit may be used with either pulse or tone dialing telephone service.
Custom Features on Your Phone Line
To learn how custom features may affect your faxing operations, please see
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - 7
Connecting an External Telephone Answering Device
(TAD)
Sequence
You might choose to connect an additional answering system. When you have an
external TAD on the same telephone line as the FAX/MFC, the TAD answers all calls.
The FAX/MFC “listens” for fax calling (CNG) tones. If it hears them, the FAX/MFC
takes over the call and receives the fax. If it doesn’t hear CNG tones, the FAX/MFC
lets the TAD continue playing your outgoing message so your caller can leave you a
voice message.
The TAD must answer within four rings (the recommended setting is two rings). The
FAX/MFC cannot hear CNG tones until the TAD has answered the call, and with four
rings there are only 8–10 seconds of CNG tones left for the fax “handshake.” Make
sure you carefully follow instructions in this manual for recording your outgoing
message. We do not recommend using the toll saver feature on your external
answering machine if it exceeds 4 rings.
Do not connect a TAD elsewhere on the same phone line—your FAX/MFC and TAD
will both try to control the line.
2 - 8
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections
The external TAD must be plugged into the back of the FAX/MFC, into the jack
labeled EXT. Your FAX/MFC cannot work properly if you plug the TAD into a wall
jack.
1
2
Plug the telephone line cord from the wall jack into the back of the FAX/MFC, in the
jack labeled LINE.
Plug the telephone line cord from your TAD into the back of the FAX/MFC, in the
jack labeled EXT. (Make sure this cord is connected to the TAD at the TAD’s
telephone line jack (not to telephone set jack).)
3
Set your external TAD to four rings or less. (The FAX/MFC’s Ring Delay setting does
not apply.)
4
5
6
7
Record the outgoing message (see below).
Set the TAD to answer calls.
See Message Storage (Function/Set, 8, 1) to VOICE:EXT.
Set the Answer Mode to MC:MSG CTR.
Outgoing Message (OGM)
Timing is important in recording this message. The message sets up the ways to handle
both manual and automatic fax reception.
1
Record 5 seconds of silence at the beginning of your message. (This allows your FAX/
MFC time to listen for the fax CNG tones of automatic transmissions before they
stop.)
2
3
Limit your speaking to 20 seconds.
End your 20-second message by giving your Fax Receive Code for people sending
manual faxes. For example:
“After the beep, leave a message or send a fax by pressing 5 1 and Start.”
Connecting an External Telephone
Your FAX/MFC is equipped with a handset that you can use as a regular phone.
However, you can also connect a separate telephone (or telephone answering device)
directly to your FAX/MFC.
Connect the modular plug on the telephone’s line cord to the jack labeled EXT. on the
back of the FAX/MFC.
Whenever this phone (or TAD) is in use, the screen displays EXT. TEL IN USE, and,
if the FAX/MFC handset is lifted, an alarm sounds. To disconnect the call and switch
to the FAX/MFC, press Speaker Phone.
L O C A T I O N A N D C O N N E C T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
2 - 9
3
On-Screen Programming
3
User-Friendly Programming
We have designed your FAX/MFC with on-screen programming and a Help key.
User-friendly programming helps you take full advantage of all the functions your
Since your fax programming is done on the LCD, we created step-by-step on-screen
prompts to help you program your FAX/MFC. All you need to do is follow the
prompts as they guide you through the function menu selections and programming
options and settings.
Function Mode
You can access the function mode by pressing Function/Set. When you enter the
function mode, your FAX/MFC displays a list of main menu options from which you
can choose. These options appear one after the other on the display. Select an option
by pressing Function/Set when the option appears on the screen.
You can “scroll” more quickly through options by pressing
. When the screen
displays your selection, press Function/Set. (Press to scroll backward if you
passed your choice or to save key strokes. Both arrow keys show all options, in the
opposite order.)
Before you press Function/Set after entering information in a field using the dial
pad, you can correct a mistake. Use
characters.
to back up and then type over the incorrect
When you finish a function, the screen displays ACCEPTED.
If you want to exit the Function mode, press Stop.
Alternating Displays
When you see alternating displays, the LCD sometimes alternates between the
currently selected option, and a help message giving brief instructions about how to
proceed. The display you’ll probably see most often is shown below, showing you,
when you place an original in the ADF, that you can dial a number and send a fax, or
you can make a copy.
FAX: NO. & START
COPY: PRESS COPY
3 - 1
O N - S C R E E N P R O G R A M M I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Selection Table
If you have a basic understanding of how to program your FAX/MFC, you can
perform most of the programming settings without the Owner’s Manual. To help you
understand the function selections, options, and settings that are found in your fax
programs, use the Function Selection Table below.
1. INITIAL SETUP
Function
Description
Factory Set
More Info
1. DATE/TIME
Enter date and time for LCD
display and to print on
transmissions.
—
2. STATION ID
Program name, fax number and
telephone number to appear on
each transmitted page.
—
3. BEEPER
Adjust volume level of beeper.
LOW
OFF
4. VOLUME AMPLIFY
For the hearing-impaired, you
can set the volume to the VOL
AMPLIFY:ON setting on a
permanent or temporary basis.
5. TONE/PULSE
(For Canada Only)
Selects dialing mode.
TONE
6. LOCAL
LANGUAGE
(For Canada Only)
Allows you to change the LCD
Language to French.
ENGLISH
See French
manual
O N - S C R E E N P R O G R A M M I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - 2
2. SETUP RECEIVE
Function
Description
Factory Set
More Info
1. RING DELAY
Number of rings before FAX/
MFC answers in FAX/TEL,
FAX, or MC mode.
RING
DELAY:04
TOLL
SAVER:OFF
2. F/T RING TIME
3. EASY RECEIVE
4. REMOTE CODE
Sets the time for “double ring”
in FAX/TEL mode.
20
Receive fax messages without
pressing the Start key.
ON
ON
Enter code to activate or
deactivate machine from a
remote location.
(
51, #51)
5. REDUCTION
6. PAPER
Reduces size of image.
AUTO
Selects size of paper for fax
receiving.
LETTER
OFF
7. POLLING RX
Sets up your FAX/MFC to poll
another fax machine.
8. MF LINK (For MFC
660MC Only)
Fax Receive Only/PC Primary/
PC Receive Only.
PC Primary
3. SETUP SEND
Function
Description
Factory Set
More Info
1. COVERPG SETUP
Automatically sends a cover
page you program.
OFF
2. COVERPAGE MSG
3. CONTRAST
Program customized message
for fax cover page.
—
AUTO
Change lightness or darkness of
a fax you are sending.
4. RESOLUTION
Allows you to change
resolutions page by page.
STANDARD
OFF
5. OVERSEAS MODE
Adjusts for sometimes difficult
overseas transmissions
6. CALL RESERVE
7. DELAYED FAX
8. POLLED TX
You can send a fax, then speak.
Send originals later.
OFF
—
Sets up your FAX/MFC with an
original to be retrieved by
another fax machine.
OFF
9. MEMORY TX
You can send faxes from
memory.
OFF
3 - 3
O N - S C R E E N P R O G R A M M I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
4. CANCEL JOB
Function
Description
Factory Set
Factory Set
More Info
Cancel a delayed fax or polling
job.
5. INTERRUPT
Function
Description
More Info
Send a fax now, even if you
have the machine set to send a
fax later, or if you have it set for
Polling.
6. SET AUTO DIAL
Function
Description
Factory Set
More Info
1. ONE-TOUCH DIAL
Dial numbers stored in memory
by pressing only one key.
—
2. SPEED-DIAL
Dial numbers stored in memory
by pressing only four keys.
—
—
3. SETUP GROUPS
Set up a Group number for
broadcasting.
7. PRINT REPORTS
Function
Description
Factory Set
More Info
1. XMIT REPORT
2. ACT.REPORT
OFF
INTERVAL:
OFF
3. AUTO DIAL
Print lists and reports of
activity.
—
4. TEL. INDEX
(Details in Chapter 11)
—
—
—
5. USER SETTINGS
6. MEMORY STATUS
O N - S C R E E N P R O G R A M M I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
3 - 4
8. SETUP MSG CTR
Function
Description
Factory Set
More Info
1. MSG STORAGE
Select if memory will store
fax,voice or both.
FAX:OFF
VOICE:ON
2. BACKUP PRINT
3. OGM
Prints copy of faxes received
into memory.
ON
9-4
Select/Record outgoing
message.
MSG CTR
OGM
4. ICM MAX. TIME
5. ICM REC. MONITR
6. FAX FWD/PAGING
Select maximum length of
incoming messages.
30 seconds
Adjust speaker volume for
voice messages as they come in.
ON
Set FAX/MFC to forward fax/
message—OR—to call your
pager.
OFF
7. REMOTE ACCESS
Set code for retrieving
messages.
159
9-9
0. TEL SERVICE
Function
Description
Factory Set
More Info
1. DISTINCTIVE
Use with phone company
Distinctive Ring service to
register the ring pattern with
FAX/MFC.
OFF
2. CALLER ID
(For USA only)
Register your AREA CODE to
dial from the Caller ID Log.
—
3 - 5
O N - S C R E E N P R O G R A M M I N G
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Initial Setup
4
Getting Started
After you have assembled your machine using the Brother StartCard, continue the
initial setup by programming the rest of the initial settings.
Setting Date and Time
Your FAX/MFC displays the date and time, and prints it on every fax you send.
In the event of a power failure, the FAX/MFC maintains date and time information for
up to two hours. All other settings remain unaffected.
1
2
Press Function/Set, 1, 1.
ENTER YEAR:XX
ENTER MONTH:XX
Enter the last two digits of the year and press
Function/Set.
3
Enter two digits for the month and press
Function/Set. (For example, enter 09 for
September, or 10 for October)
ENTER DAY:XX
4
5
6
Enter two digits for the day and press
Function/Set. (For example, 06)
ENTER TIME:XX:XX
Enter the time in 24-hour format and press Function/Set. (For example, enter 15:25
for 3:25 PM)
Press Stop. The screen now displays the date and time you set, and displays it
whenever the FAX/MFC is in Standby mode.
Setting Station ID
You can store your name, fax number, and telephone number to be printed on all fax
pages.
1
2
Press Function/Set, 1, 2.
FAX:
Enter your fax number (up to 20 digits) and press
Function/Set.
TEL:
3
Enter your telephone number (up to 20 digits) and
NAME:
press Function/Set. If your telephone number and
fax number are the same, enter the same number
again. The screen displays your entry.
4
5
Use the dial pad to enter your name (up to 20 characters) and press Function/Set.
(You can use the chart on next page to help you enter letters.)
Press Stop. The screen returns to the date and time.
I N I T I A L S E T U P
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - 1
Setting Tone/Pulse Dialing Mode (For Canada Only)
Your FAX/MFC comes set to accommodate tone (multi-frequency) dialing service. If
you have pulse (rotary) dialing service, you need to change the dialing mode.
1
Press Function/Set, 1, 5.
DIALING:TONE?
DIALING:PULSE?
2
3
Press
or
to select TONE or PULSE and
press Function/Set.
Press Stop to exit.
Details for Entering Text
When you are setting certain functions, such as the Station ID, you may need to enter
text into the FAX/MFC. Most keys on the dial pad have three or four letters printed
above them. The keys for 0, # and don’t have printed letters because they are used
for special characters or operations.
By pressing the appropriate number on the dial pad the correct number of times, you
can access the character you want.
Press Key
one time
two times
three times
four times
2
3
4
5
6
7
8
9
A
D
G
J
B
E
C
F
2
3
4
5
6
S
8
Z
H
K
N
Q
U
X
I
L
O
R
V
Y
M
P
T
W
Inserting spaces
If you want to enter a blank space, press
twice.
Making corrections
If you entered a letter incorrectly and want to change it, press
to move the cursor
after the last correct letter. Then press Stop; the letters above and to the right of the
cursor are deleted. Re-enter the correct text and/or digits. You can also back up and
type over incorrect letters.
4 - 2
I N I T I A L S E T U P
Download from Www.Somanuals.com. All Manuals Search And Download.
Repeating letters
If you need to enter a character assigned to the same key as the previous character,
press
to move the cursor to the right.
Special characters and symbols
Press , # or Ø repeatedly to move the cursor under the special character or symbol
yow want, then press
to select it.
Press for
Press # for
Press Ø for
(space) ! “ # $ % & ’ ( ) + , - . /
*
: ; < = > ? @ [ ] ^ _
É À È Ê Î Ç Ë Ö 0
NOTICE
The Telephone Consumer Protection Act of 1991 makes it unlawful for
any person to use a computer or electronic device to send any message via
a telephone fax machine unless such messages clearly contain, in a
margin at the top or bottom of each transmitted page, or on the first page
of the transmission, the date and time it is sent and an identification of the
business or other entity or other individual sending the message and the
telephone number of the sending machines or such business, other entity
or individual.
In order to program this information into your FAX/MFC, you should
■ The telephone number you enter is used only for Call Back Message and Cover
Page features.
■ If you do not enter a fax number, no additional information can be entered.
■ To enter a space, press
once between numbers and twice between characters.
■ If your Station ID has already been programmed, the screen prompts “1” to make
a change, or “2” to exit without changing.
Setting Up Your Area Code (For USA Only)
You must set up your area code in Caller ID.
1
2
Press Function/Set, 0, 2.
AREA CODE:000
Use the dial pad to enter your area code and press
Function/Set.
AREA CODE:908
3
Press Stop to exit.
I N I T I A L S E T U P
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - 3
Setting Beeper Volume
You can set the beeper to LOW, HIGH or OFF. The default setting isLOW. When the
beeper is set to LOW or HIGH, the FAX/MFC beeps every time you press a key or
make an error, and at the end of fax sending or receiving.
1
2
3
Press Function/Set, 1, 3.
Press
or
to select your setting and press Function/Set.
Press Stop to exit.
Choosing the Handset Volume
Before you begin to use the FAX/MFC, you must decide if you need to set the handset
volume to AMPLIFY:ON for a user who is hearing-impaired. The AMPLIFY volume
level complies with FCC standards.
VOLUME AMPLIFY: OFF
This default setting is appropriate if none of the users are hearing-impaired. During a
conversation, users can press
or
on the control panel to adjust the volume.
When the handset is replaced, the handset volume remain until you change it again.
VOLUME AMPLIFY: ON–TEMPORARY
This setting is appropriate if some of the users are hearing-impaired. During a
conversation, users can press
or
on the control panel to adjust the volume
to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset volume will
return to the default setting of LOW.
VOL AMPLIFY:ON–PERMANENT
Choose VOL AMPLIFY:ON–PERMANENT if all of the users are hearing-impaired.
During a conversation, users can press
or
on the control panel to adjust the
volume to LOW, HIGH or AMPLIFY. When the handset is replaced, the handset
volume returns to the default setting of AMPLIFY.
When you press
or
on the control panel to adjust the volume, the display
shows the setting you are choosing. Each key press changes the volume to the next
setting.
WARNING
It is important that you do not choose PERMANENT unless all users are
hearing-impaired. Otherwise, the default setting of AMPLIFY may damage the
hearing of some users.
4 - 4
I N I T I A L S E T U P
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Volume Amplify
Please carefully read “Setting the Handset Volume” before you do the following steps:
Press Function/Set, 1, 4.
1
2
Press
or
to select VOL
VOL AMPLIFY:OFF?
SELECT <- -> & SET
AMPLIFY:OFF? if none of the users are
hearing-impaired and go to Step 4—OR—If
some or all of the users are hearing-impaired,
select VOL AMPLIFY:ON?
3
Press
or
to select PERMANENT? if
PERMANENT?
all the users are hearing-impaired—OR—
Select TEMPORARY? if only some of the
users are hearing-impaired.
SELECT <- -> & SET
4
5
Press Function/Set.
Press Stop to exit.
Setting the Speaker Volume
You can adjust the speaker volume when your FAX/MFC is onhook (after you
pressed Speaker Phone), by selecting a speaker volume level.
Press
or
to adjust the volume level. The display shows the setting you are
choosing. Each key press changes the volume to the next setting. The new setting will
remain until you change it again.
You can adjust the speaker volume while you are listening to your OGM(Outgoing
Message) and ICMs (incoming messages).
If you turn Incoming Recording Monitor to OFF (Function/Set, 8, 5), the Speaker
for screening calls will be disabled and you won’t hear callers leaving messages.The
volume for other operations can still be controlled using
and
.
Setting the Ring Volume
You can adjust the ring volume when your FAX/MFC is idle. You can select a ring
volume level or press until the ring is off.
Press
or
to adjust the volume level. With each key press, the FAX/MFC
rings so you can hear the current setting and the display shows the setting you are
choosing. Each key press changes the volume to the next setting. The new setting will
remain until you change it again.
Memory Storage
In the event of a power failure, all settings in the INITIAL SETUP, SETUP RECEIVE,
SET AUTO DIAL and SETUP MSG CTR plus the COVERPG SETUP and
COVERPAGE MSG (from SETUP SEND) functions are stored permanently. You
may have to reset the date and time.
I N I T I A L S E T U P
Download from Www.Somanuals.com. All Manuals Search And Download.
4 - 5
5
Setup Receive
5
Basic Receiving Operations
Select Answer Mode
MANUAL—You must answer all calls yourself. If you hear fax tones, press Start to
begin receiving the fax, then hang up. You can use this mode with Distinctive Ringing.
FAX ONLY—The FAX/MFC automatically answers every call as a fax call. You
cannot receive a voice call, but you can dial out and make a voice call.
FAX/TEL—The FAX/MFC automatically answers every call. If the call is a fax, it
prints the fax. If the call is not a fax, it signals you with a double ring (ring-ring),
different from the phone company ringing, to alert you to pick up the call. If you select
this setting, you’ll need to set the Ring Delay and F/T Ring Time features (on the
following pages). If you have extension phones on the same line as the FAX/MFC, set
MSG CTR—The FAX/MFC provides you with a built-in digital Message Center for
fax and voice. When you set the machine to answer calls, it will record up to 15
minutes of messages. For more information about Message Center (MSG CTR)
09/06 15:25 FAX
MSG CTR
Current Answer Mode
5 - 1
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
To select or change your Answer Mode
1
Press Mode. The screen displays your current selection.
FAX ONLY
FAX/TEL
MANUAL
Or, if Message Center Mode is ON, it overrides your Answer Mode Setting, so the
display shows:
MC:MSG CTR
2
Continue to press Mode until your new selection appears. After 2 seconds, the screen
returns to the date and time display, along with your new Answer Mode setting.
If you’re changing Answer Mode while in another operation, the screen returns to the
current operation display.
Setting Ring Delay
The Ring Delay setting determines the number of times the FAX/MFC rings before it
answers. If you have extension phones on the same line as the FAX/MFC, keep the
1
2
3
Press Function/Set, 2, 1.
Press
or
to select Ring Delay and press Function/Set.
Press
or
to select how many times the line rings before the FAX/MFC
answers (00 – 04) and press Function/Set. If you select 00, the line doesn’t ring at
all.
4
Press Stop to exit.
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
5 - 2
Setting F/T Ring Time
You need to determine how long the FAX/MFC will notify you with its special double
ring when you have a voice call. It will ring happens after the initial ringing from the
phone company. Only the FAX/MFC rings for 20, 30, 40 or 70 seconds; no other
phones on the same line ring the special double ring. However, you can answer the call
on any phone on the same line as the FAX/MFC.
1
2
Press Function/Set, 2, 2.
Press
or
to select how long the FAX/MFC
RING TIME:20 SEC
will ring to alert you that you have a voice call and
press Function/Set.
3
Press Stop to exit.
Now, when a call comes in and the machine is set to FAX/TEL Mode, all phones on
this line will ring the number of times you selected in Ring Delay.
You can let the FAX/MFC pick up and detect if it’s a fax or voice call. If it’s a fax call,
the machine prints the fax. If it’s a voice call, the machine signals you with a double
ring for the length of time you selected in F/T Ring Time.
Even if the caller hangs up during the double ringing, the FAX/MFC continues for
the set time.
Record FAX/TEL Outgoing Announcement (F/T OGM)
This is the announcement played by your FAX/MFC (not an external TAD) when
someone calls and your machine is set to FAX/TEL mode. Although callers hear your
announcement, they cannot leave a message. To erase the announcement, follow the
1
Press Function/Set, 8, 3. The screen prompts you to choose F/T OGM or MSG CTR
OGM.
2
3
Press
Press
or
or
to select F/T OGM (not MSG CTR OGM) and press Function/Set.
to select RECORD OGM? and press Function/Set.
Then pick up the handset to record a message.
Replace the handset. Your OGM is played.
Press Stop to exit.
4
5
5 - 3
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
Easy Receive
When you use this feature, you don’t have to press Start when you answer a fax call
and hear calling beeps. Just hold the handset and wait a few seconds. When you see
RECEIVE on the fax screen or when you hear “chirps” through the handset of an
extension phone connected to another wall jack, just replace the handset, and your
machine does the rest. Selecting ON allows the FAX/MFC to receive fax calls
automatically, even if you lift the handset of an extension or external phone. Selecting
SEMI lets the machine receive the call only if you’ve answered it at the FAX/MFC.
Selecting OFF means you’ll have to activate the FAX/MFC yourself, by pressing
Start or by pressing 5 1 if you are not at your machine. (See Operation from
If you’ve set the feature to ON, but your FAX/MFC doesn’t automatically connect a
fax call when you lift an external or extension phone handset, press the Fax Receive
code 5 1. At the FAX/MFC, lift the handset and press Start.
1
2
3
Press Function/Set, 2, 3.
Press
or
to select ON, SEMI or OFF and press Function/Set.
Press Stop to exit.
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
5 - 4
Printing a Reduced Incoming original
You can always reduce the size of an incoming fax to a fixed percentage, regardless
of the size of the paper (up to legal) in your FAX/MFC. If you choose AUTO, your
machine chooses the level of reduction for you.
1
2
3
Press Function/Set, 2, 5.
5.REDUCTION
Press
or
to select the reduction ratio you want (AUTO, 93%, 87% or 75%)
and press Function/Set. Choose 100% if you don't want a reduction.
Press Stop to exit.
Recommended Reductions
If your paper is letter size (8.5" x 11"), and the incoming fax is
letter size, select 93%
A4, select 87%
legal size, select 75%.
If your paper is A4 (8.2" x 11.6"), and the incoming fax is
letter size, select 100%
A4, select 93%
If your paper is legal size (8.5" x 14"), and the incoming fax is
letter size, select 100%
A4, select 100%
legal size, select 93%.
Setting Paper Size
You can use three sizes of paper for printing your faxes—letter, legal and A4. When
you change the kind of paper you have loaded in the FAX/MFC, you will need to
change the setting for paper size, so your machine will know how to fit the incoming
fax on the page. You can also select the level of page reduction to fit on the paper in
your machine.
1
2
Press Function/Set, 2, 6.
6.PAPER
Press
or
to select LETTER, LEGAL or
CHANGE REDUCTION
1.YES 2.NO
A4 and press Function/Set.
3
4
5
Press 1 if you want to change the reduction
setting—OR—Press 2 to go to Step 5.
Press
or
to select AUTO, 100%, 93%, 87% or 75% and press
Function/Set.
Press Stop to exit.
5 - 5
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Receiving Operations
Operation from External or Extension Telephone
If you answer a fax call on an extension phone or on an external phone in the EXT.
jack, you can make your FAX/MFC take over by using the Fax Receive Code. When
you press the Fax Receive Code 5 1, the FAX/MFC starts to receive a fax. (See
If the FAX/MFC answers a voice call and double-rings for you to take over, use the
Telephone Answer Code # 5 1 to take the call at an extension phone. (See
If you answer a call, and no one is on the line, assume you’re receiving a fax. At the
FAX/MFC phone, press Start, then hang up. At an extension phone, press 5 1, wait
for fax receiving tones (chirps), then hang up. At an external phone, press 5 1 and
wait for the phone to be disconnected (the screen displays RECEIVE) before you hang
up. (Your caller will have to press Start to send the fax.)
For FAX/TEL Mode Only
When the FAX/MFC is in FAX/TEL mode, it will use the F/T Ring Time (double
ringing) to alert you to a voice call. If you’re at the FAX/MFC, you can lift the handset
to answer.
If you’re at an extension phone, you’ll need to lift the handset during the F/T Ring
Time and press # 5 1 between the double rings. If no one is on the line, or if someone
wants to send you a fax, send the call back to the FAX/MFC by pressing 5 1.
Changing Remote Codes
Remote Codes might not work with some telephone systems. The preset Fax Receive
Code is 5 1. The preset Telephone Answer Code is # 5 1.
If you are always disconnected when accessing your external TAD remotely, try
changing the Fax Receive Code from 5 1 to # # # and the Telephone Answer Code
from # 5 1 to 9 9 9.
1
2
Press Function/Set, 2 , 4 .
Press or to select ON (or OFF) and press
Function/Set.
REMOTE ACT.:ON?
3
4
5
If you want to, enter a new Fax Receive Code, then
press Function/Set.
*
FAX RECEIVE: 51
If you want to, enter a new Telephone Answer
Code, then press Function/Set.
TEL ANSWER:#51
Press Stop to exit.
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
5 - 6
Polling
Polling is the process of retrieving faxes from another fax machine. You can use your
FAX/MFC to “poll” other machines, or you can have someone poll your machine. All
parties involved in polling need to set up their fax machines to accommodate polling.
When someone polls your machine to receive a fax, they pay for the call; if you poll
someone’s fax machine to receive a fax, you pay for the call.
For details about the Polling function, our fax-back system 1-800-521-2846 (USA),
1-800-681-9838 (From within Canada) and request Document #: 20918.
Some fax machines do not respond to the polling function.
®
Setting Multi-function Link Mode (For MFC 660MC
Only)
®
®
Multi-function Link (for MFC 660MC only). After completing all setup for Multi-
®
®
function Link , you can select Multi-function Link Mode (PC Primary/PC Receive
Only/Fax Receive Only) for routing incoming faxes.
1
2
Press Function, 2, 8.
8.MF LINK
Press
or
to select PC PRIMARY, PC RECEIVE ONLY or FAX RECEIVE
ONLY.
3
4
Press Set when the screen displays your selection.
Press Stop to exit.
5 - 7
S E T U P R E C E I V E
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Setup Send
6
Automatic Document Feeder (ADF)
■ Originals must be between 5.8 and 8.5 inches wide, and 5.9 and 23.7 inches long. Your
FAX/MFC can only scan an image 8.2 inches wide, regardless the paper width.
■ Make sure you place the original face down, top edge first.
■ Adjust the paper guides to fit the width of your original.
Paper Guides
■ The automatic document feeder (ADF) can hold up to 10 pages, feeding each one
individually through the FAX/MFC. Use standard (17 lb–24 lb) paper when using the
ADF; if you’re using heavier paper, feed each sheet individually to prevent paper
jams.
DO NOT use curled, wrinkled, folded or ripped paper, or paper with staples, paper
clips, paste or tape attached. DO NOT use cardboard, newspaper or fabric.
■ Make sure originals written with ink are completely dry.
You must press Resolution (before you send the fax) to select the resolution for the
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
6 - 1
Manual Transmission
Manual transmission lets you hear the dial tone, ringing and fax receiving tones before
sending the fax.
1
2
Place the original face down in the ADF.
Pick up the handset and listen for a dial tone
—OR—press Speaker Phone and listen for a dial tone.
3
Enter the fax number you want to call. (You can enter the digits using the dial pad, or
you can enter a One Touch or Speed Dial number or you can call using
4
5
When you hear the fax tone, press Start.
If you’re using the handset, hang up.
Automatic Transmission
This is the easiest way to send a fax.
IMPORTANT: Do not pick up the handset, or press Speaker Phone.
1
2
Place the original face down in the ADF.
Enter the fax number using One Touch, Speed Dial, Search or the dial pad. (See One
3
Press Start.
Manual and Automatic Fax Redial
If you’re sending a fax manually and the line is busy, press Redial/Pause to retry the
number.
If you’re sending a fax automatically and the line is busy, the FAX/MFC will redial
automatically up to three times at 5 minute intervals.
Memory Transmission
This feature allows your machine to scan a fax into its memory and send it as soon as
the scan is complete. This way, you don’t have to wait for the entire fax to be
transmitted before you retrieve your original.
1
2
3
Place the original face down in the ADF.
Press Function/Set, 3, 9.
9.MEMORY TX
To change the default setting, press
to select ON (or OFF) and press
or
MEMORY TX:ON?
SELECT <- >- & SET
Function/Set. Go to Step 5—OR—For the
next fax transmission only, press or to
select NEXT FAX ONLY and press Function/Set.
4
For the next fax only, press
press Function/Set.
or
to select ON (or OFF) and
6 - 2
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Press 1 to select additional settings. The display returns to the
SETUP SEND menu—OR—Press 2 if you are finished choosing settings
and go to Step 6.
Enter fax number and press Start.
If you get a MEMORY FULL message while scanning the first page of a fax, press
Stop to cancel the scan. If you get a MEMORY FULL message while scanning in a
subsequent page, you’ll have the option to press Start to transmit the pages scanned
so far, or to press Stop to cancel the operation. In this case, send the fax by the
Manual Transmission.
Depending on your typical faxes, MEMORY FULL errors can occur frequently. If
this happens, change the Memory Transmission setting back to OFF.
Basic Sending Operations
Contrast
If your original is very light or very dark, you might want to set the contrast
accordingly. Use S.LIGHT to send a very light original. Use S.DARK to send a very
dark original.
1
2
3
4
Place the original face down in the ADF.
Press Function/Set, 3, 3.
Press
or
to select AUTO, S.LIGHT or S.DARK and press Function/Set.
Press 2 if you are finished choosing settings, and go to Step 5—OR—Press 1 if you
want to select additional settings. The display returns to the Setup Send menu.
5
Enter a fax number and press Start to send a fax—OR—Press Copy/Help to make
a copy.
Resolution
When you have an original in the ADF, you can use the Resolution key. Press
Resolution continuously until you see your selection on the screen.
Standard—suitable for most typed originals.
Fine—good for small print; transmits a little slower than standard resolution.
Super Fine—good for small print or artwork; transmits slower than fine resolution.
Photo—use when original has varying shades of gray; slowest transmission time.
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
6 - 3
Advanced Sending Operations
Overseas Mode
If you have difficulty sending a fax overseas, use the Overseas mode.
After you send a fax using this feature, the feature turns itself off.
1
2
3
Place the original face down in the ADF.
Press Function/Set, 3, 5.
5.OVERSEAS MODE
Press
or
to select ON (or OFF) and press
Function/Set.
4
Press 1 if you want to select additional settings. The display returns to the Setup Send
menu—OR—Press 2 if you are finished choosing settings and go to Step 5.
5
6
Enter the fax number you’re calling.
Press Start.
Delayed Fax
You can use this function to send a fax up to 24 hours later.
Place the original face down in the ADF.
Press Function/Set, 3, 7.
1
2
3
Enter the time, in 24-hour format, that you want the fax to be sent and press
Function/Set. (For example, enter 19:45 for 7:45 PM)
4
Press 1 to leave the originals waiting in the
ADF—OR—Press 2 to scan the original into
memory.
1.DOC 2.MEMORY
5
Press 1 to select additional settings.
The display returns to the SETUP SEND menu—OR—Press 2 if you are finished
choosing settings and go to Step 6.
6
7
Enter the fax number.
ENTER FAX NO.
PRESS START KEY
Press Start. The machine will wait to send the
fax at the time you set up.
Setting Up for Polled Transmit
Polled Transmit is when you set up your FAX/MFC to wait with an original so another
fax machine can retrieve it.
For more information call our fax-back system at 1-800-521-2846 (USA),
1-800-681-9838 (from within Canada) and request Document #: 21707.
6 - 4
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
Canceling a Scheduled Job
You can cancel tasks you’ve scheduled, such as Delayed Fax or Polling Transmit.
1
2
Press Function/Set, 4. Any waiting jobs
4.CANCEL JOB
appear on the display. If there are no jobs
waiting, the screen displays NO JOB
WAITING.
If you have more than two jobs waiting, press
cancel and press Function/Set.
—OR—
or
to select the job you want to
If you have only one job waiting, go to Step 3.
3
4
Press 1 to cancel—OR—Press 2 to exit without canceling.
Press Stop to exit.
Interrupting Delayed Fax and Polled Transmit Jobs
You can send a fax or make a copy now, even if you have the FAX/MFC set to send
a fax later, or if you have it set to be polled. However, you cannot use automatic redial
or the function mode.
1
2
Press Function/Set, 5.
Wait 2 seconds, then remove the original that is
waiting in the ADF.
INSERT ORIGINAL
3
Place the original you want to send now in the
ADF.
4
5
6
7
Enter the number for the fax you want to send now.
Press Start.
After the transmission is finished, return the first original to the ADF.
Press Function/Set, 5 to restore the Delayed Fax and/or Polling.
If you have set up a Delayed Fax or Polled Transmit job in memory, you don’t have
to interrupt it to send a fax or make a copy.
If you have set up a Delayed Fax or Polled Transmit job, the machine will send an
original without storing it in memory.
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
6 - 5
More Advanced Features
(Call Brother fax-back system)
Your machine has additional advanced features and functions that are not included in
this manual. To receive faxed instructions, please call our automated Brother fax-back
system at 1-800-521-2846 and enter the Document Numbers for the following scripts:
• Polling (Doc #: 21707)
• Cover Page (Doc #: 20918)
• Call Reservation (Doc #: 21708)
• Print Sample Call Back Message (Doc #: 21709)
• Next Fax Reservation (Doc #: 21710)
• Multiple Resolution Transmission (Doc #: 21711)
• Glossary (Doc #: 21712)
6 - 6
S E T U P S E N D
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Auto Dial Numbers
7
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your FAX/MFC to do three types of easy dialing:
One Touch, Speed Dial, and Groups for Broadcasting of faxes.
If you lose electrical power, auto dial numbers in memory will not be lost.
Storing One Touch Dial Numbers
You can store four fax/phone numbers that you can dial by pressing one key (and
Start). You also can store names with these numbers. When you press a One Touch
dial location, the screen displays the name or number as the call is dialed. (See One
One Touch keys are not the dial pad keys. They are the four keys (numbers 1–4)
located in the middle of the control panel.
1
2
Press Function/Set, 6, 1.
Press the One Touch key where you want to store a number.
(One Touch key 1 is pre-programmed for Brother fax-back system, USA only. You
can override it if you wish.) The screen displays the location you selected.
3
Enter a number (up to 20 digits) and press
Function/Set.
NAME:
If you want to enter a pause in the dialing sequence (to wait for an “outside line,” for
example), press Redial/Pause as you’re entering digits. Pressing Redial/Pause
enters a 3.5-second pause when the number is dialed, and a dash appears on the
screen.
4
5
Use the dial pad to enter the name or company (up to 15 characters) and press
Function/Set. You can use the chart on page 17 to help you enter letters—OR—To
Press
or
to select the type of number and press Function/Set.
FAX
TEL
a fax only number
a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
6
Return to Step 2 to store another One Touch number—OR—Press Stop to exit.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
7 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
When you dial an AUTO DIAL number, the screen displays the name you’ve stored,
or, if you haven’t stored a name, the number you’ve stored.
If you must wait for another dial tone at any point in the dialing sequence, store a
pause at that place in the number by pressing Redial/Pause. Each key press adds a
3.5 second pause.
You can use chain dialing to store long dialing sequences. For example, to store 9 1
201 555 1234 987 65 4321, divide the number into two parts. Store the first part as a
Chain type number (this tells the system that the dialing sequence is not complete).
CHAIN—9 1 201 555 1234
The last part of the One Touch number must be stored as any of the other following
three types.
FAX or FAX/TEL or TEL—987 65 4321
Now, when you dial, just press the two keys (one after the other, in order) where
you’ve stored the two parts of the number.
Storing Speed Dial Numbers
You can store Speed Dial numbers, when you dial by pressing only four keys. There
are 50 Speed Dial locations.
1
2
Press Function/Set, 6, 2.
SPEED-DIAL? #
Use the dial pad to enter a two-digit location
(01–50) and press Function/Set.
#05:
ENTER & SET
3
4
Enter the number (up to 20 digits) and press
Function/Set.
NAME:
Use the dial pad to enter the name or company (up to 15 characters) and press
Function/Set—OR—Press Function/Set to store the number without a name.
5
Press
or
to select the type of number and press Function/Set.
FAX
TEL
a fax only number
a telephone (voice) number
FAX/TEL both a fax and telephone (voice) number
CHAIN a number (usually an access code) for chain dialing.
6
Return to Step 2 to store another Speed Dial number—OR—Press Stop to exit.
7 - 2
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing One Touch and Speed Dial Numbers
If you try to store a One Touch or Speed Dial number in a location where a number is
already stored, the screen displays the current name stored there, then prompts you to
either
1. CHANGE—OR—2. EXIT.
1
2
Press 1 to change the number stored, or press 2 to exit without making a change.
Enter a new number.
•
If you want to erase the entire number, press Stop when the cursor is to the left
of the digits. The letters above and to the right of the cursor are deleted.
•
If you want to change a digit, use
or
to position the cursor under the
digit you want to change, then type over it.
3
Follow the directions from Step 3 in Storing One Touch Numbers or Storing Speed
Dial Numbers.
Setting Up Groups for Broadcasting
Groups allow you to send the same fax message to many fax numbers by pressing only one
One Touch key (Broadcasting). First, you’ll need to store each fax number as a One
Touch or Speed Dial number. Then, you can combine them into a Group. Each Group
uses up a One Touch key
.
Finally, you can have up to four small Groups, or you can
Press Function/Set, 6, 3.
.)
1
2
SELECT ONE-TOUCH
Select a One Touch key where you wish to store
the number. (For example, press One Touch key 2 to store a Group.)
3
4
Use the dial pad to identify the Group with a
number and press Function/Set. (For
example, press 1 for Group 1.)
SETUP GROUP:GO
ENTER & SET
To include One Touch or Speed Dial numbers
in the Group, enter them as if you were dialing.
For example, for One Touch key 3, press One
G01:*O3#O9_
Touch key 3. For Speed Dial location 09, press Search/Speed Dial, then press 0, 9
on the dial pad. The LCD shows 03, #09.
5
6
Press Function/Set to accept the numbers for
this group.
NAME:
ENTER & SET
Use the dial pad to enter a name for the group
7
Press Stop to exit.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
7 - 3
Dialing Options
You can use your FAX/MFC to make voice telephone calls by dialing manually, or by
using Search, One Touch or Speed Dial memory. You can use the handset or you can
use the Speaker Phone to make and receive calls.
The Speakerphone allows you to operate the phone hands free, or allows more than
one person in the room to participate in a two-way phone conversation.When using the
Speakerphone, make sure to speak clearly and close to the microphone
.
When you dial an auto dial number, the screen displays the name you’ve stored, or, if
you haven’t stored a name, the fax number you’ve stored.
Manual Dialing
Manual dialing is simply pressing all of the digits of the phone number.
Pick up the handset—OR—Press Speaker Phone.
When you hear a dial tone, dial the number using the dial pad.
1
2
3
You can switch from handset to Speakerphone by pressing Speaker Phone, then
replacing the handset.You can switch from Speakerphone to handset by lifting the
handset.
4
To hang up, replace the handset—OR—Press Speaker Phone.
One Touch Dialing
1
2
3
When you hear a dial tone, press the One Touch key of the location you want to call.
To hang up a voice call, replace the handset—OR—Press Speaker Phone.
If you try to use a One Touch location with no number stored in it, you hear a warning
sound, and screen displays NOT REGISTERED. The display returns to normal after
2 seconds.
If you are sending a fax, press Start after pressing the One Touch key. If you picked
up the handset, press Start when the receiving fax machine answers with fax tones.
7 - 4
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Speed Dialing
1
2
3
When you hear a dial tone, press Search/Speed Dial, press #, then press the two-
digit Speed Dial number.
To hang up a voice call, replace the handset—OR—Press Speaker Phone.
If you are sending a fax, press Start after entering the Speed Dial number. If you
picked up the handset, press Start when the receiving fax machine answers with fax
tones.
Dialing Access Codes and Credit Card Numbers
Sometimes you may want to choose from among several long distance carriers when
you make a call. Rates may vary depending upon the time and destination. To take
advantage of low rates, you can store the access codes or long-distance carriers as One
Touch and Speed Dial numbers. You can store these long dialing sequences by
dividing them and setting them up separately in any combination. You can even
include manual dialing using the dial pad. The combined number will be dialed in the
order you entered it, as soon as you press Start. Make sure you selected CHAIN as
the type of the number when you store it into the One Touch or Speed Dial. (See
The CallManage access code can save you money on long distance calls (for details,
For example:
You store “555”on One Touch key 03 and “7000”on One Touch key 02. If you press
One Touch 03, 02 and Start you will dial “555-7000”. To temporarily change a
number, you can substitute part of the number with manual dialing using the dial pad.
For example, to change the number to 555-7001 you can press One Touch 03 and
press 7, 0, 0, 1 using the dial pad.
Pause after dialing Speed Dial numbers for the name to be displayed before you enter
the next portion of the dialing sequence.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
7 - 5
Search
You can search for names you have stored in One Touch and Speed Dial memories.
1
2
3
Press Search/Speed Dial, then enter the first letter of the name you’re looking for.
Press
or
to search the memory.
When the screen displays the name you want to call, pick up the handset or press
Speaker Phone for a voice call.
4
5
Press Start to begin dialing.
When the call is over, hang up—OR—Press Speaker Phone to cancel the call.
Redial
If the last number you dialed was busy, press Redial/Pause for easy dialing.
Answering Calls with the Speakerphone
When the FAX/MFC rings, instead of lifting the handset, press Speaker Phone.
Speak clearly, toward the microphone
. To end the call, press Speaker Phone.
If you have a bad telephone line connection, the other party might hear your voice
echoed during the call. Hang up and try the call again—OR—Pick up the handset.
Broadcasting
Using the numbers you have stored in Groups, One Touch and Speed Dial memory,
you can “broadcast” faxes automatically to a maximum of 54 different locations in a
you must set MEMORY TX to either ON or NEXT FAX ONLY.
After the Broadcast is completed, a Broadcast Report will be printed automatically to
let you know the results.
1
2
Place the original face down in the ADF.
Press Function/Set, 3, 9 to select ON or NEXT FAX ONLY and press
Function/Set.
3
4
Enter the One Touch and Speed Dial numbers (one after the other) or a Group Number
you have stored.
Press Start. The FAX/MFC stores the original in memory, then transmits it to all the
numbers you entered. If the line is busy, your machine will redial automatically up to
three times at 5 minutes intervals.
Press Stop during transmission to cancel the current fax broadcast.
7 - 6
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause
Press Redial/Pause to insert a pause between numbers. Each key press adds a 3.5
second delay.
Hold
1
2
3
Press Hold/Caller ID to put a call on Hold.
You can put down the handset without disconnecting the call.
Pick up the FAX/MFC handset—OR—Press Speaker Phone to release the call
from Hold. Picking up an extension handset will not release the call from Hold.
Tone/Pulse (For Canada Only)
If you have pulse dialing service, but need to send tone signals (for telephone banking,
for example), follow the directions below. If you have touch tone service, you do not
need this feature to send tone signals.
1
2
3
Lift the handset.
Press #. Any digits dialed after this send tone signals.
When you hang up, the FAX/MFC returns to pulse dialing mode.
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
7 - 7
8
Telephone Services
8
Custom Features
Your FAX/MFC supports the Distinctive Ring and Caller ID telephone services
offered by some telephone companies.
If you have Call Waiting, Ring Master, Voice Mail, an answering service or an alarm
system or other custom feature on your telephone line, it may create a problem in the
operation of your FAX/MFC.
Distinctive Ring
This FAX/MFC feature lets you use the Distinctive Ring subscriber service offered by
some telephone companies, which allows you to have several telephone numbers on
one phone line. Each phone number has its own Distinctive Ring pattern, so you know
which phone number is ringing. This is one way you can have a separate phone
number for your FAX/MFC.
Your FAX/MFC has a Distinctive Ring function, allowing you to dedicate one phone
number just for receiving faxes. You’ll need to follow the directions below to
“register” the new Distinctive Ring pattern, that was assigned by the Telephone
Company, so your FAX/MFC can recognize its incoming calls.
You can change or cancel the Distinctive Ring pattern at any time. You can switch it
off temporarily, then turn it back on. When you get a new fax number, make sure you
reset this function.
You can register only one Distinctive Ring pattern with the FAX/MFC. Some ringing
patterns cannot be registered.
■ The FAX/MFC will answer only calls to its registered number.
■ To have your TAD answer only the main number, the FAX/MFC must be in Manual
Mode.
■ In FAX/TEL or FAX ONLY mode, the FAX/MFC will answer all numbers on the
phone line.
Registering the Distinctive Ring Pattern
1
2
3
Set the FAX/MFC to MANUAL mode.
Press Function/Set, 0, 1.
Press
or
to select DISTINCTIVE:SET? and press Function/Set.
8 - 1
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
or
to select the prestored ring pattern you want to assign and press
Function/Set. (You will hear each pattern as you scroll through the four patterns.)
Be sure to choose the pattern assigned by the Telephone Company.
Ring
Rings
Pattern
1
2
3
4
long - long
short - long - short
short - short - long
very long (normal pattern)
5
Press Stop to exit.
Caller ID
The Caller ID feature of this FAX/MFC lets you use the Caller ID subscriber service
offered by many local telephone companies. After at least two rings, the screen
displays the telephone number of your caller (or up to 16 characters of the name, if
available). Once you pick up the handset, the Caller ID information disappears from
the screen, but the call information remains stored in the Caller ID memory.
• CALL PICKUP display remains on the screen when no Caller ID information was
transmitted.
• OUT-OF-AREA display means the call originates outside your Caller ID service area.
• PRIVATE CALL display means the caller has intentionally blocked transmission of
information.
Caller ID service varies with different carriers. Call your local telephone company to
determine the kind of service available in your area.
Caller ID Log
Your FAX/MFC stores up to 30 of the last Caller IDs received into the FAX/MFC’s
memory in the Caller ID Log. When the thirty-first call comes in, information about
the first call is erased. You can print the report or scroll through Caller ID information
to review those calls made to your FAX/MFC.
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
8 - 2
Printing the Caller ID Log
Press Hold/Caller ID.
1
2
CALLER ID LOG
PRINTING
To print the Caller ID Log, press Start.
Viewing the Caller ID Log
1
2
3
Press Hold/Caller ID.
CALLER ID LOG
PRESS START KEY
SELECT <- -> & SET
After 2 seconds, press
through the Caller ID Log.
or
to scroll
01)MARY HENDERSON
02)TOM HENDERSON
03)ABC COMPANY
When you want to see more detailed
information for a displayed ID (phone
number and date and time call was received)
press Function/Set.
03)ABC COMPANY
03)9087772837
03)02/01 12:00
DIAL:PRESS START
4
To continue viewing the Caller ID Log (Step
2), press
or
.
—OR—
To exit the Caller ID Log, press Stop.
Returning a Call from the Log
You can scroll through the Caller ID Log and select a call to return automatically. (See
You must set up your AREA CODE in advance. (USA only)
1
2
Press Hold/Caller ID.
CALLER ID LOG
PRESS START KEY
SELECT <- -> & SET
Press
or
to scroll through the Caller
01)MARY HENDERSON
01)9082438436
ID Log and when you see a call you want to
return immediately, press Function/Set.
01)02/01 12:00
DIAL:PRESS START
3
4
To begin dialing, press Start.
Begin speaking when the other party
answers.
This feature may not be available in certain area of USA and Canada.
If your dialing plan does not follow the standard 1 + area code + 7-digit number
dialing system for calling outside your area code, you may experience problems
returning calls automatically from the Caller ID Log. Your FAX/MFC will
automatically dial “1” plus the area code for any number that does not originate in
your area code. If this is not the procedure followed by your dialing plan you will not
be able to return calls automatically.
8 - 3
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
Registering a Caller ID Number
You can set up a caller in the Caller ID Log as a One Touch or Speed Dial number.
1
Press Hold/Caller ID.
CALLER ID LOG
PRESS START KEY
SELECT <- -> & SET
2
3
After 2 seconds, press
through the Log and when you see a caller
you want to register, press Function/Set.
or
to scroll
03)ABC COMPANY
03)9087772837
03)02/01 12:00
DIAL:PRESS START
To register the caller as a One Touch
number, press the One Touch key where you
want the number to be stored.
—OR—
To register the caller as a Speed Dial number,
press Search/Speed Dial and use the dial
pad to press the two-digit location code (01–
50), and press Function/Set.
NAME:
ENTER & SET
If the LCD shows REGISTERED, the auto dial location already has a number.
4
5
Enter the caller’s name and press Function/Set.
Press
or
to select the type of number and press Function/Set:
FAX
TEL
A fax number
A telephone (voice) number
FAX/TEL Both a fax and telephone number
CHAIN
A number, usually an access code, for chain dialing
6
Return to Step 2 to store another auto dial number—OR—Press Stop to exit.
Clearing a Caller ID Stored in Memory
For effective use of the memory, it is recommended that you clear the Caller IDs stored
in memory by pressing Erase when the display shows the number or name.
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
8 - 4
Call Waiting Caller ID
The Call Waiting Caller ID feature lets you use the Call Waiting Caller ID service
offered by many local telephone companies. This feature displays the telephone
number (or name, if available) of Call Waiting callers on your FAX/MFC’s screen.
1
To answer a Call Waiting signal while you’re talking on the phone, ask the other party
if you can put them on Hold to catch the other call. The screen displays the Caller ID.
2
3
Press Search/Speed Dial to switch to the second call.
To switch back to the first call, press Search/Speed Dial again.
Either caller can hang up at any time. However, if you hang up you will disconnect
both callers.
CallManage (For USA Only)
This Brother fax machine provides convenient, “One-Touch” access to a long distance
plan that provides best average long distance rates*. Once registered, fax or phone
calls made using the CallManage feature will access a long distance carrier selected
by CallManage, Inc., that offers a plan with best average domestic rates based on
standard long distance plans of major carriers within the United States. This may
result in significant savings, depending on your current long distance carrier and
calling patterns.
Trying the CallManage feature requires no commitment on your part. Just follow the
steps below to register with CallManage, Inc. Once registered, your One-Touch key
4 can be used to access the CallManage feature for any calls you choose. Calls made
without using the CallManage feature will be processed through your normal long
distance carrier.
If you prefer not to activate the CallManage feature you can use One Touch key 4 to
store a number of your own choosing.
Registration with CallManage
Before using the CallManage feature, you must register for this service with
CallManage Inc.:
1
2
Pick up the handset of your FAX/MFC.
Press One Touch 4.
(Your machine will automatically dial the pre-stored toll free registration number for
CallManage, Inc. or you may directly dial 1-888-387-9680.)
3
A CallManage Customer Service Representative will ask you a number of simple
questions required to set up your account (such as name, address, phone number, etc.
for billing purposes). There are no sign-up fees, monthly service charges or connection
fees for the CallManage feature. You will receive a separate itemized bill each month
from CallManage, Inc. for only those calls made using the CallManage feature*.
4
After registering, the Representative will explain how to reprogram your One Touch
key 4 for CallManage dialing.
8 - 5
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
Sending a Fax Using CallManage
Place the original face down in the ADF.
Press One Touch 4.
1
2
3
Dial the complete long distance or international fax number as usual, using One Touch,
Speed Dial, Search or the dial pad. (See One Touch Dialing, Speed Dialing and Search,
4
Press Start.
Placing a Telephone Call Using CallManage
You must dial the number and wait to hear the other party answer before you pick up
the handset to speak.
1
2
Press One Touch 4.
Dial the complete long distance or international number as usual, using One Touch,
Speed Dial, Search or the dial pad. (See One Touch Dialing, Speed Dialing and
Search, page 7-4 to 7-6.)
3
4
Press Start.
Pick up the handset when you hear the other party through the fax machine’s one-way
speaker.
Customer Support
If you have questions or want more information, call CallManage at 1-877-622-5457.
Percent savings and comparisons based on standard rate plans of major carriers with
tariffs in effect as of January 2000. Long distance savings will depend upon the
customer’s current carrier for long distance service and his or her calling patterns.
Rates updated periodically. Call 1-877-622-5457 for latest rate and underlying carrier
information. In order to use the CallManage feature you must register for service
through CallManage, Inc (toll free) at 1-888-387-9680. Once registered, the One
Touch 4 button will access a long distance provider selected by CallManage, Inc. that
offers a plan with best average domestic rates based on standard long distance plans
of major carriers within the United States. Using the CallManage feature after
registering will result in your receiving a long distance telephone bill from
CallManage, Inc. Without proper registration, calls made using the One Touch 4
button may not be connected or may default to a standard rate plan offered by the
underlying carrier and charges for such calls will appear either on the customer’s
local telephone bill as the underlying carrier’s service or on a direct bill from the
underlying carrier. The One Touch 4 button should not be used if the customer wishes
to use his or her existing primary or dial around carrier for long distance service.
Brother International, Corp. is not responsible for long distance service or customer
billing. Subject to service availability. All applications are subject to credit approvals.
DO NOT USE THE ONE TOUCH 4 BUTTON TO DIAL 911 – IT WILL NOT
ACCESS EMERGENCY SERVICES.
CallManage is a trademark of CallManage, Inc.
T E L E P H O N E S E R V I C E S
Download from Www.Somanuals.com. All Manuals Search And Download.
8 - 6
9
Message Center
9
Message Center Mode
Message Center Mode allows you to store incoming fax and voice messages in a
flexible memory. The memory stores 15 minutes of voice messages, or up to 20 pages
of fax memory. Any voice or fax message can be retrieved remotely. Memory is
shared between fax and voice messages, which are stored on a “first-come, first-
served” basis.
You must record an outgoing message in order to use the Message Center Mode. (See
Flexible Memory Settings (Message Storage)
Message Center Mode offers you six flexible memory settings, so you can decide the
kinds of messages you want to receive.
1.FAX:ON VOICE:ON
Both voice and fax messages are stored. You can use
the Fax Forwarding or Paging features and retrieve
voice and fax messages remotely.
2.FAX:ON VOICE:EXT You need an external answering machine connected to
the EXT jack for this setting. Fax messages are stored
in the message center memory, but voice messages are
stored in your external answering machine. Retrieve
messages from the external answering machine. You
cannot use the Paging feature for voice messages with
this setting.
3.FAX:ON VOICE:OFF All memory is used to store fax messages— no voice
messages will be stored.
4.FAX:OFF VOICE:ON All memory is used to store voice messages—no fax
messages will be stored. Incoming faxes will print on
paper. You can use the Paging feature, and retrieve
voice messages remotely.
5.FAX:OFF VOICE:EXT You need an external answering machine connected to
the EXT jack for this setting. Incoming faxes are not
stored in memory, but will print on paper. Voice
messages are stored in the external answering
machine.
6.FAX:OFF VOICE:OFF Incoming faxes are not stored in memory, but will
print on paper. Voice calls are not stored in memory.
9 - 1
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Message Center
You must set up the Message Center in the following order:
1
2
3
Setting Message Storage.
Record Message Center Outgoing Message (MSG CTR OGM).
Activate Message Center Mode.
Setting Message Storage
and VOICE settings below.
1
2
Press Function/Set, 8, 1.
FAX:OFF?
SELECT
& SET
& SET
Press
or
to select ON (or OFF)
VOICE:ON?
SELECT
and press Function/Set.
3
4
Press or
Press Stop to exit.
Recording Message Center Outgoing Message
Recording the Message Center Outgoing Message (MSG CTR OGM) is the second
step you need to follow before you can turn on the Message Center. Make sure your
OGM is less than 20 seconds long.
1
2
Press Function/Set, 8, 3.
The screen prompts you to choose an OGM.
MSG CTR OGM?
SELECT
& SET
Press
or
to select MSG CTR OGM? (not F/T OGM) and press
Function/Set.
This is the only setting you can select if you want to turn the Message Center on.
Press or to select RECORD OGM? and press Function/Set.
3
4
Pick up the handset to record a message.
For example: Hello. We are unable to take your call at this time. Please leave a
message after the signal. If you wish to send a fax, please press 5 1, wait for fax
tones, then press the Start button.
5
6
Replace the handset. The Message Center will play your OGM.
Press Stop to exit.
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - 2
Listening to Outgoing Message (OGM)
1
2
3
Press Function/Set, 8, 3.
Press
or
to select MSG CTR OGM? (or F/T OGM) and press Function/Set.
Press
or
to select PLAY OGM? and press Function/Set. Adjust the volume
by pressing Volume
or
.
4
Press Stop to exit.
Erasing Outgoing Message (OGM)
1
2
3
4
5
Press Function/Set, 8, 3.
Press
Press
or
or
to select MSG CTR OGM? (or F/T OGM) and press Function/Set.
to select ERASE OGM? and press Function/Set.
Press 1 to erase the OGM—OR—Press 2 to exit without erasing.
Press Stop to exit.
Activating Message Center Mode
Press and hold
until it lights and
the LCD displays:
MC:MSG CTR
When
Message Indicator
The
light flashes when you have new messages or faxes waiting for your review.
The LCD displays the total number of voice and
fax messages stored in the Message Center
memory.
VOICE:03 FAX:02
If you press the flashing
Message Center before getting your new
messages, they won’t be lost. The new messages
to turn off the
PRINT FAX?
1.YES 2.NO
will be played automatically and the LCD will ask you to acknowledge the new faxes:
Press 1 to print (and automatically delete) the faxes from memory—OR—Press 2 to
save the faxes in memory until printing is convenient.
9 - 3
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Voice Messages
Follow the steps below to listen to voice messages.
1
Press Play/Record. Adjust the Volume by pressing
or
.
All messages are played in the order they were recorded. The display shows the
number of the current message, and the total number of messages.
If Caller ID information was received, the FAX/MFC beeps during the message and
displays the Caller ID information for one second.
During playback, the screen displays the time and date the message was recorded.
2
3
Press
(RWD) at the end of the message to repeat a message. Press # (FWD) to skip
to the next message. You can press and # repeatedly until you reach the message
you want to play.
Press Stop to exit.
Printing a Fax Message
Once you print a new fax message stored in memory, it is erased from the memory
automatically.
1
2
3
Press Play/Record. After two seconds, the FAX/MFC begins to play voice
messages.
If there are fax messages in memory, the LCD
displays:
PRINT FAX?
1.YES 2.NO
To print the faxes, press 1
—OR—
Press 2 to exit without printing.
Backup Printing Option
When you choose FAX: ON in the Message Center mode, all incoming fax messages
are stored in the available memory for retrieval. To print a backup copy automatically,
turn this option on.
1
2
Press Function/Set, 8, 2.
BACKUP PRINT:ON
SELECT
& SET
Press
or
to display ON (or OFF) and
press Function/Set.
3
Press Stop to exit.
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - 4
Erasing Messages
If you choose to erase all fax messages, the FAX/MFC will print any previously
unprinted faxes before erasing them from memory. Fax messages cannot be erased
individually.
You can erase voice messages individually, or all at once.
To erase voice messages individually
1
2
Press Play/Record. The FAX/MFC sounds a two-second beep and begins message
playback. Each message is preceded by one long beep, and followed by two short
beeps.
To erase a specific message, press Erase
immediately after the two short beeps, or while
ERASE THIS MSG.?
1.YES 2.NO
the message is playing. The screen prompts
Press 1 to erase the message—OR—Press 2 to cancel.
Press Stop to exit.
3
4
To erase messages all at once
1
2
Press Erase.
ERASE ALL VOICE?
SELECT <- -> & SET
Press
or
to select erasing all voice
messages (VOICE), all document messages
(FAX), or all messages—both voice and fax—(MSG) and press Function/Set.
3
4
Press 1 to erase—OR—Press 2 to cancel.
Press Stop to exit.
Setting Maximum Time for Incoming Messages
Your FAX/MFC comes set to receive voice messages up to 30 seconds long. You can
change this setting to any length from 20 seconds to 60 seconds, in 5-second
increments.
1
2
Press Function/Set, 8, 4.
MESSAGE 30 SEC?
SELECT
& SET
Press
or
to select the maximum time
setting for incoming messages and press
Function/Set.
3
Press Stop to exit.
9 - 5
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Toll Saver
When you set the toll saver feature, the FAX/MFC answers after four rings if youdon’t
have messages, and after two rings if you do have messages. This way, when you call
the FAX/MFC, if it rings three times, you know you have no messages, and can hang
up, to avoid a toll charge.
When Toll Saver is ON, it overrides your Ring Delay setting. Toll Saver must be off
1
2
Press Function/Set, 2, 1.
Press
or
to select the TOLL SAVER (or RING DELAY) and press
Function/Set.
3
4
Press or
to select ON and press Function/Set.
Press Stop to exit.
ICM Recording Monitor
This feature lets you turn the speaker volume for voice messages ON or OFF. When
you turn the monitor OFF, you will not hear messages as they come in.
1
2
3
Press Function/Set, 8, 5.
Use
or
to select OFF (or ON) and press Function/Set.
Press Stop to exit.
Recording a Conversation
You can record a telephone conversation by pressing Play/Record during the
conversation. Your recording can be as long as the Incoming Message Maximum
Time. You and the other party will hear a beep every 15 seconds while recording. To
stop recording, press Stop. You cannot record a conversation using Speaker Phone.
Fax Forwarding/Paging
When Paging is set to ON, your FAX/MFC dials the pager number you’ve
programmed, and dials your Personal Identification Number (PIN) when connected,
to activate your pager and let you know you have a fax or voice message in the
Message Center memory.
When Fax Forwarding is set to ON, your FAX/MFC dials the fax machine phone
number you’ve programmed, and forwards any faxes you’ve received.
You can not use Paging and Fax Forwarding at the same time.
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - 6
Programming a Fax Forwarding Number
1
2
Press Function/Set, 8, 6.
Press
or
until the LCD displays FAX FORWARD? and press
Function/Set.
3
4
Enter the number of the fax machine where
faxes will be forwarded (up to 20 digits) and
press Function/Set.
FWD#:
ENTER & SET
Press Stop to exit.
You can not use Paging and Fax Forwarding at the same time.
Programming Paging Number
1
2
3
Press Function/Set, 8, 6.
Press
or
until the LCD displays PAGING? and press Function/Set.
Enter your pager phone number (up to 20 digits)
followed by # # and press Function/Set. Do
not include the area code if it is the same as that
PAG#:
ENTER & SET
of your FAX/MFC. For example, 1 8 0 0 5 5 5 1 2 3 4 # #.
4
If your pager requires a PIN, enter the PIN, press #, press Redial/Pause, enter your
FAX/MFC telephone number, then press # # and press Function /Set. For example,
1 2 3 4 5 # Redial/Pause 1 8 0 0 5 2 1 2 8 4 6 # #.
—OR—
If you do not need a PIN, press Redial/Pause, enter the telephone number of your
FAX/MFC, then press # # and press Function/Set. For example, Redial/Pause 1
8 0 0 5 2 1 2 8 4 6 # #.
5
Press Stop to exit.
You can not change a Paging number or PIN remotely.
9 - 7
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Retrieval
Using Remote Access Code
1
2
Dial your fax number from a touch tone phone.
When your FAX/MFC answers, immediately enter your Remote Retrieval Access
Code.
3
The FAX/MFC signals the kinds of messages received:
1 long beep—Fax message(s)
2 long beeps—Voice message(s)
3 long beeps—Fax and Voice message(s)
No beeps—No messages
4
The FAX/MFC then prompts you with two short beeps to enter a command. If you
wait longer than 30 seconds to enter a command, the MFC hangs up. If you enter an
invalid command, the FAX/MFC beeps three times.
5
6
Press 9 0 to reset the FAX/MFC when you finish.
Hang up.
If your FAX/MFC is set to MANUAL mode, you can access the Message Center by
waiting about 2 minutes, then entering the Remote Access Code within 30 seconds.
Changing Remote Retrieval Access Code
Enter your Remote Retrieval Access Code when the FAX/MFC picks up your call, so
you can access features remotely. The access code is preset to 159 , but you can
change it.
1
2
Press Function/Set, 8, 7.
Enter a three-digit number from 000 to 999 and pressFunction/Set. The “ ” cannot
be changed.
Do not use the same digits that appear in your Fax Receive Code or Telephone
Answer Code.
3
Press Stop to exit.
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - 8
Remote Commands
Follow the commands below to access features remotely. When you call the
FAX/MFC and enter your Remote Retrieval Access Code (159 ), the system will
signal you with two short beeps to enter a remote command.
Remote Commands
Operation Details
91 Playing voice messages
After one long beep, the FAX/MFC plays the
ICM.
1
2
(Skip back)
(Skip next)
Press 1 while listening to an ICM to repeat it.
If you press 1 before a message, you will hear
the previous message.
While playing the ICM, you can skip to the
next message.
9 STOP Playing
Stop playing the ICM.
92 Record Memo
After one long beep, you can record a memo.
To stop recording, press 9.
93 Erase all ICM
If you hear one long beep, the erase is
accepted. If you hear three short beeps, you
cannot erase because all voice messages have
not been played, or there is no voice message
to erase.
*This code erases all recorded messages, not
one at a time.
94 Play and Record OGM in
memory
1 Play
1 MSG CTR OGM
2 F/T OGM
The FAX/MFC plays the selected OGM. You
can stop playing OGMs by pressing 9.
2 Record 1 MSG CTR OGM
2 F/T OGM
After one long beep, you can record the
selected OGM. You will hear the message
played once. You can stop recording the
message by pressing 9.
95 Changing Fax Forwarding/
Paging setting
If you hear one long beep, the change is
accepted. If you hear three short beeps, you
cannot change it because the conditions have
not been met. (Example: registering paging
number.) You can register your fax forwarding
number by using 4. FAX FWD NO. (See page
the FAX/MFC automatically will change to
FAXFWD:ON mode. Then retrieve a Memory
to make sure that the Fax Forwarding number
you registered is correct in the List.
1 OFF
2 Fax Forwarding
3 Paging
4 FAX FWD NO.
9 - 9
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Commands
96 Retrieve a fax
Operation Details
1 Memory Status List
2 Retrieve all faxes
Enter the number of a remote fax machine to
receive a report or stored fax messages. (See
3 Erase fax in the memory
If you hear one long beep, you can erase the fax
message from the memory.
97 Check the receiving status
You can check whether your FAX/MFC has
received any FAX or VOICE messages. If yes,
you will hear one long beep. If no, you will
hear three short beeps.
1 FAX
2 VOICE
98 Change Answer Mode
1 MSG CTR
If you hear one long beep, you can change the
answer mode. If you hear three short beeps,
you cannot change it. (Example: There is no
MSG CTR OGM when you want to change to
MSG CTR mode.)
2 FAX/TEL
3 FAX
90 Exit
After a long beep, you can exit remote control.
Retrieving Memory Status List
You can retrieve the Memory Status List from a remote fax machine to see if you have
any fax messages.
1
2
Dial your fax number.
When you hear the beep, immediately enter your Remote Retrieval Access Code
(1 5 9 ).
3
4
When you hear two short beeps, use the dial pad to press 9 6 1.
Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where
you want the Memory Status List forwarded, and then press # #.
You can not use or # as dial numbers. However, if you want to store a pause,
press #.
5
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints the
Memory Status List.
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
9 - 10
Retrieving Fax Messages
1
2
Dial your fax number.
When you hear the beep, immediately enter your Remote Retrieval Access Code
(1 5 9 ).
3
4
As soon as you hear two short beeps, use the dial pad to press 9 6 2.
Using the dial pad, enter the number of the remote fax machine (up to 20 digits) where
you want your fax messages forwarded, and then press # #.
You can not use or # as dial numbers. However, if you want to store a pause,
press #.
5
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints your
fax messages.
Changing Fax Forwarding Number
You can change the default setting of your fax forwarding number from a remote fax
machine.
1
2
Dial your fax number.
When you hear the beep, immediately enter your Remote Retrieval Access Code
(1 5 9 ).
3
4
When you hear two short beeps, use the dial pad to press 9 5 4.
Enter the new number of the remote fax machine where you want your fax messages
forwarded, then press # #.
You can not use or # as dial numbers. However, if you want to store a pause,
press #.
5
6
7
To retrieve the Memory Status List, when you hear two short beeps, use the dial pad
to press 9 6 1.
Use the dial pad to enter the number of the remote fax machine (up to 20 digits), then
press # #.
After you hear your FAX/MFC beep, hang up and wait.
Your FAX/MFC calls the remote fax machine. The remote fax machine prints the
Memory Status List showing the new forwarding number.
8
Check the forwarding number.
If the forwarding number is not correct, return to Step 1 to reset it.
9 - 11
M E S S A G E C E N T E R
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Making Copies
10
Copy Functions
To make a single copy that is not reduced, enlarged or sorted, you only have to press
one key. The default resolution for a single copy is Super Fine. Set the resolution to
PHOTO for photographs. Remember, your machine cannot scan anything closer than
one-eighth inch from the edge of the paper.
Making a Single Copy
1
2
Place the original face down in the ADF.
Press Copy/Help twice.
To cancel, press Stop.
Do NOT pull on the paper while copying is in progress.
Copy Options: Single or Multiple Copies,
Reduce/Enlarge, Sort/Stack
You can choose additional copy options. First, you can select the number of copies.
Next, you can choose whether multiple copies will be STACKED (all copies of page 1,
then all copies of page 2, etc.) or SORTED (collated). Finally, you can choose an
enlargement or reduction ratio. To automatically reduce the copy to the paper size you
have set for the paper tray, select AUTO. To reduce the copy by a fixed percentage,
choose 93%, 87%, 75% or 50%. Or, to enlarge the copy, select 150%, 125% or
120%. To copy a document at its original size, select 100%.
1
2
Place the original face down in the ADF.
Press Copy/Help.
NO.OF COPIES:01
THEN COPY OR SET
3
Enter the number of copies you want (1-99) and
press Function/Set.
For example, press 9 for nine copies.
NO.OF COPIES:09
STACK P.01 FNE
To start copying now, press Copy/Help.
If you would like to select additional copy
options, like SORT, ENLARGE or
REDUCE, press Function/Set.
MULTI COPY:STACK
THEN COPY OR SET
M A K I N G C O P I E S
Download from Www.Somanuals.com. All Manuals Search And Download.
10 - 1
4
5
Press
or
to select SORT.
For example, select SORT.
MULTI COPY:SORT
SORT P.01 FNE
To start copying now without enlarging or
reducing, press Copy/Help.
To reduce or enlarge the image, press
Function/Set.
ELG/RDC:100% ?
THEN COPY OR SET
Press
reduction ratio.
or
to select an enlargement or
ELG/RDC:100% ?
ELG/RDC:120% ?
•
•
ELG/RDC: 93% ?
ELG/RDC: 75% ?
SORT P.01 FNE
For example, 75 %.
Press Copy/Help.
6
If you are making multiple copies and get a MEMORY FULL message while you
are scanning the first page, press Stop to cancel the job. Then make a single copy. If
you selected SORT and the MEMORY FULL message appears while scanning
subsequent pages, you can press Copy/Help to copy the portion that is in memory,
or press Stop to cancel. To restart the copy job using less memory, pressCopy/Help
for stacked copies.
10 - 2
M A K I N G C O P I E S
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Printing Reports
11
FAX/MFC Settings and Activity
You can print the following lists and reports:
Choose to print a Transmission Verification
Report after each fax you send.
1.XMIT REPORT
2.ACT.REPORT
Activity Report lists information about the last 30
incoming and outgoing faxes. TX means
Transmit; RX means Receive.
Lists names and numbers stored in One Touch and
Speed Dial memory, in numerical order.
3.AUTO DIAL
AUTO DIAL LIST (above), alphabetically.
4.TEL.INDEX
Lists settings for INITIAL SETUP, SETUP
RECEIVE, SETUP SEND, PRINT REPORTS,
TEL SERVICE and SETUP MSG CTR.
5.USER SETTINGS
Lists summary information and amount of
memory in use.
6.MEMORY STATUS
To Print a Report
1
2
Press Function/Set, 7.
Enter the number of the report you want to print. For example, press 4 to print the
TEL-INDEX.
For the Activity Report, also press
or
to select PRINT REPORT?.
3
4
Press Start.
Press Stop to exit.
P R I N T I N G R E P O R T S
11 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Transmission Verification (Xmit) Report
You can use the Xmit Report as proof that you sent a fax. This report lists the name
or fax number of the receiving party, the time and date of transmission, and whether
the transmission was successful.
When the feature is OFF, the report is printed automatically only if there’s an error
during transmission. If the report indicates NG, send the original again. If the report
indicates you should check the readability of certain pages, resend those pages.
When the feature is ON, the report is printed with every fax you send.
1
2
3
Press Function/Set, 7, 1.
Press
or
to select ON (or OFF) and press Function/Set.
Press Stop to exit.
Activity Report Interval
You can set the FAX/MFC to print activity reports at specific intervals (6, 12, 24
hours, 2, 4 or 7 days). If you set the interval to OFF, you can print the report by
following the steps in the previous section.
1
2
Press Function/Set, 7, 2.
Press
or
to display:
INTERVAL?
and press Function/Set.
3
Press or to choose your setting and
press Function/Set. If you choose 7 days, the screen prompts you to choose a day
at which to begin the 7-day countdown.
4
5
Enter the time, in 24-hour format, that printing will begin and press Function/Set.
(For example, enter 19:45 for 7:45 PM)
Press Stop to exit.
11 - 2
P R I N T I N G R E P O R T S
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Important Information
12
Standard Telephone and FCC Notices
These notices are in effect on models sold and used in
the United States only.
This equipment is hearing aid and volume control compatible.
When programming emergency numbers and/or making test calls to emergency
numbers:
■ Before you hang up, briefly explain to the dispatcher the reason for the call.
■ Perform such activities in the off-peak hours, such as early morning or late evening.
This equipment complies with Part 68 of FCC Rules. On the rear panel of this
equipment is a label that contains, among other information, the FCC Registration
Number and Ringer Equivalence Number (REN) for this equipment. You must, upon
request, provide this information to your telephone company.
You may safely connect this equipment to the telephone line by means of a standard
modular jack, USOC RJ11C.
An FCC compliant telephone cord with a modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone line or
premise’s wiring using a compatible modular jack that is Part 68 compliant. See the
Installation section of this manual for details.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have those devices ring when your telephone number is called.
In most, but not all areas, the sum of the RENs of all devices connected to one line
should not exceed five (5). To be certain of the number of devices you may connect to
your line, as determined by the REN, you should contact your local telephone
company to determine the maximum REN for your calling area. If your fax damages
the telephone line, the telephone company may discontinue your service temporarily.
If possible, they will notify you in advance. But if advance notice is not practical, you
will be notified as soon as possible. You will be informed of your right to file a
complaint with the FCC.
Your telephone company may make changes to its facilities, equipment, operations or
procedures that could affect the proper functioning of your equipment. If they do, you
will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service.
If you experience trouble with this product, please contact a Brother Authorized
Service Center for information on obtaining service or repair. The telephone company
may ask that you disconnect this equipment from the line until the problem has been
corrected or until you are sure that the equipment is not malfunctioning.
If you are not able to solve a problem with your machine, contact Brother Customer
I M P O R T A N T I N F O R M A T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
12 - 1
International Energy Star Compliance Statement
The purpose of the International Energy Star Program is to promote the development
and popularization of energy-efficient office equipment, which includes computers,
monitors, printers, facsimile receivers and copy machines world-wide. As an
International Energy Star partner, Brother Industries, Ltd. has decided that this
product meets the guideline of the program.
Industry Canada Compliance Statement (For Canada Only)
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
la matériel brouilleur du Canada.
Federal Communications Commission Compliance Notice
(For USA Only)
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
■ Reorient or relocate the receiving antenna.
■ Increase the separation between the fax equipment and the receiver.
■ Connect the fax equipment on a separate circuit.
■ Consult the dealer or an experienced radio/TV technician for help.
12 - 2
I M P O R T A N T I N F O R M A T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
For protection against the risk of electrical shock, always disconnect all cables from
the wall outlet before servicing, modifying or installing the equipment.
This equipment may not be used on coin service lines provided by the telephone
company or connected to party lines.
Brother cannot accept any financial or other responsibilities that may be the result of
your use of this information, including direct, special or consequential damages.
There are no warranties extended or granted by this document.
Important Safety Instructions
1
2
3
Read all of these instructions and save them for future use.
Follow all warnings and instructions marked on the product.
Unplug this product from the wall outlet before cleaning. Do not use liquid or aerosol
cleaners. Use a damp cloth for cleaning.
4
5
Do not use this product near water.
Do not place this product on an unstable cart, stand, or table. The product may fall,
causing serious damage to the product.
6
Slots and openings in the cabinet and the back or bottom of the machine are provided
for ventilation; to ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered. The openings should
never be blocked by placing the product on a bed, sofa, rug, or other similar surface.
This product should never be placed near or over a radiator or heater. This product
should never be placed in a built-in installation unless proper ventilation is provided.
7
8
This product should be operated from the type of power source indicated on the label.
If you are not sure of the type of power available, consult with your dealer or local
power company.
This product is equipped with a 3-wire grounding type plug. This plug will fit into only
a grounding-type power outlet. This is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to replace your obsolete outlet. Do not
defeat the purpose of the grounding-type plug.
9
Do not allow anything to rest on the power cord. Do not place this product where
people can walk on the cord.
10 If an extension cord is used with this product, make sure that the total ampere ratings
on the products plugged into the extension cord do not exceed ampere rating of the
extension cord ampere rating. Also, make sure that the total of all products plugged
into the wall outlet does not exceed 15 amperes (USA only).
11 Do not place anything in front of the fax machine that will block the exit- path of sent
documents, originals and received faxes.
12 Do not touch an original during printing.
I M P O R T A N T I N F O R M A T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
12 - 3
13 Never push objects of any kind into this product through cabinet slots, because they
may touch dangerous voltage points or short out parts resulting in a risk of fire or
electric shock. Never spill liquid of any kind on the product.
14 Do not attempt to service this product yourself, as opening or removing covers may
expose you to dangerous voltage points and/or other risks, and may void your
warranty. Refer all servicing to a Brother Authorized Service Center. A list of Brother
Authorized Service Centers has been included for your convenience, or you may
contact the Brother Customer Service for your nearest Brother Authorized Service
15 Unplug this product from the wall outlet and refer servicing to a Brother Authorized
Service Center under the following conditions:
A
B
C
D
When the power cord is damaged or frayed.
If liquid has been spilled into the product.
If the product has been exposed to rain or water.
If the product does not operate normally when the operating instructions are
followed. Adjust only those controls that are covered by the operating
instructions. Improper adjustment of other controls may result in damage and
will often require extensive work by a qualified technician to restore the product
to normal operation.
E
F
If the product has been dropped or the cabinet has been damaged.
If the product exhibits a distinct change in performance, indicating a need for
service.
16 To protect your product against power surges, we recommend the use of a power
protection device (Surge Protector).
12 - 4
I M P O R T A N T I N F O R M A T I O N
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Troubleshooting and
13
Routine Maintenance
Troubleshooting
If you can’t resolve a difficulty with your FAX/MFC using this manual, please see
page i for Brother Numbers to call for assistance.
Error Messages
You may occasionally encounter a difficulty with your FAX/MFC or telephone line.
If this happens, your FAX/MFC often identifies the problem and displays an error
message. The list below explains the most common error messages.
The ribbon is used up and printing is not
CHANGE CARTRIDGE
possible. Replace the ribbon or the ribbon
cartridge with a new one. (See Replacing the
The FAX/MFC is out of paper, or the paper is
not properly loaded. After you load paper,
press Start key.
CHECK PAPER
PRESS START KEY
The paper is jammed in the fax machine.
CHECK PAPER
1
Remove any paper that is not jammed.
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
13 - 1
2
Open the top cover by lifting
the gray lever on the right side
of the top cover.
Top Cover
3
Pull the jammed printout gently from the paper tray toward the front of the machine.
If the printout is jammed, then pull it toward the back of the machine.
YES!
Printout is jammed
NO!
13 - 2
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
6
7
Remove the print cartridge and turn the spool to tighten the ribbon.
Close the top cover.
Load the paper.
A poor quality phone line resulted in a
communications error. Try the call again.
COMM.ERROR
You have requested a polling call from another
party, but the other fax machine is not in Poll
Waiting mode.
CONNECTION FAIL
The other party has disconnected during a fax. Try
calling the other party.
DISCONNECTED
The documents were not inserted or fed properly,
or were too long or too short.
DOCUMENT JAM
1
2
3
4
Remove any paper that is not jammed from the ADF.
Open the top cover.
Pull the original toward the front of the machine.
Close the cover.
Original is jammed
Contact Brother Customer Service at:
MACHINE ERROR XX
PRESS STOP KEY
USA:
1-800-284-4329 (voice)
1-800-853-6660 (voice)
From within Canada:
From within Montreal: 1-514-685-6464 (voice)
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
13 - 3
The number you called does not answer or is busy.
You may also have reached a number not
connected to a fax. Check the number and call
again.
NO RESPONSE/BUSY
NOT REGISTERED
You’ve tried accessing a One Touch or Speed Dial
location with no number assigned to it. See pages
Touch or Speed Dial numbers.
The print head has overheated. Unplug the FAX/
MFC and wait 30 minutes for it to cool.
PRINTER FAULT
TOP COVER OPEN
The top cover is not closed completely.
If You Are Having Difficulty with Your FAX/MFC
If you think there is a problem with your FAX/MFC, make a copy first. If the copy
looks good, the problem is probably not your FAX/MFC. Check the difficulties below
and follow the troubleshooting tips.
Printing or Receiving Faxes
Condensed Print and Horizontal Streaks;
Top and Bottom of Sentences Cut Off
If your copy looks good, you probably had a bad connection, with static or
interference on the phone line. If the copy looks bad, call Brother Customer
Service at 1-800-284-4329 (USA), 1-800-853-6660 (from within Canada) or
1-514-685-6464 (from within Montreal).
Vertical Black Lines When Receiving
The sender’s scanner may be dirty. Ask the sender to make a copy to see if the
problem is with the sending machine. Try receiving from another fax machine.
If the problem continues, call Brother Customer Service at 1-800-284-4329
(USA), 1-800-853-6660 (from within Canada) or 1-514-685-6464 (from within
Montreal).
Phone Line or Connections
FAX/MFC Does Not Answer When Called
Make sure the FAX/MFC is in the correct receiving mode for your setup (either
FAX, FAX/TEL or TAD). Check for dial tone. If possible, call your FAX/MFC
to hear it answer. If there is still no answer, check the telephone line cord
line.) Connect a standard telephone handset to the FAX/MFC telephone jack.
If there is no ringing when you call your FAX/MFC, call your Telephone
Company to check the line.
13 - 4
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
Telephone Answering Device (TAD) Does Not Answer When Called
Connect the telephone line cord from your TAD to the back of the FAX/MFC,
in the jack labeled EXT. Make sure the TAD is set to answer calls. (See
No Dial Tone on the Handset
Press Speaker Phone—OR—Lift the handset. If you don’t hear a dial tone,
check telephone line cord connections at the FAX/MFC and wall jack. Check
that the handset is connected to the FAX/MFC’s handset jack. Test the wall jack
with another single line telephone. If there is no dial tone at the wall outlet, call
your Telephone Company.
The Caller ID does not display after the Call Waiting Signal
The Caller ID signal is sent ten seconds after the Call Waiting Signal and
speaking may interfere with it. When you hear the Call Waiting signal, ask the
other party to hold while you answer the call. Then stop speaking until you see
the Caller ID on the LCD.
Sending Faxes
Poor Transmitting Quality
Dialing Does Not Work
Check all line cord connections, and make sure the curled handset cord is not in
the EXT jack.
Check power cord connection.
Send a manual fax by pressing Speaker Phone—OR—Lifting the handset,
and dialing the number. Wait to hear fax receiving tones before pressing Start.
Vertical Black Lines When Sending
Use your FAX/MFC to make a copy. If the copy shows the same problem, the
scanner area is dirty. Lift the top cover and check the original path. Clean the
scanner’s white tape and the glass strip under the tape using isopropyl alcohol
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
13 - 5
Handling Incoming Calls
Double Ring in FAX/TEL Mode
The FAX/MFC knows the incoming call is not a fax so it is signaling you to
answer the telephone call. Pick up the FAX/MFC handset or answer from an
extension phone and press your FAX/MFC’s Telephone Answer Code (default
Transferring a Call to the FAX/MFC
If you have answered the FAX/MFC handset, press Start, and hang up
immediately.
If you answered at an extension phone, press your three-digit Fax Receive Code
(the factory setting is 51). When your FAX/MFC answers, hang up.
FAX/MFC “Hears” Voice as CNG Tone
If your FAX/MFC is set to Easy Receive ON, and it answers voice calls by
Transmission Verification Report Prints “Result: NG”
There is probably temporary noise or static on the phone line. Try sending the
fax again. If the problem continues, call the Telephone Company to check your
phone line.
Custom Features on a Single Line
If you have Call Waiting, Caller ID, Call Waiting/Caller ID, Ring Master, Voice
Mail, an answering machine, alarm system or any other custom feature on a
single phone line with your FAX/MFC, it may create a problem sending or
receiving fax data.
Example #1:
If you are having a telephone conversation and a fax communication
signal comes through on your Call Waiting Caller ID feature, you can
verify that the second call is a fax by switching to it. You have the option
to receive the fax call, by asking the first caller to hang up to clear the line.
Example #2:
If you are sending or receiving a fax message while a Call Waiting Caller
ID (or other custom feature) signal comes through on the line, the signal
can temporarily interrupt or disrupt the fax data. Brother’s ECM feature
should help overcome this problem. This condition is related to the
telephone system industry, and is common to all devices that send and
receive information on a single, shared line with custom features. If
avoiding a slight interruption is crucial to your business, a separate line
with no custom features is recommended.
13 - 6
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
Routine Maintenance
Cleaning the Scanner
Before cleaning, unplug the power cord for safety. Clean the white bar and the glass
strip under the bar with isopropyl alcohol on a lint-free cloth. Be careful not to bend
the spring plate or drop anything into the FAX/MFC.
White Bar
Glass Strip
Cleaning the Print Head
Before cleaning, unplug the power cord for safety. To clean the FAX/MFC print head,
wipe the print head with a lint-free cloth that is dry or lightly moistened with isopropyl
alcohol.
Print Head
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
13 - 7
WARNING
Just after you have used the machine, the print head is extremely HOT!
Replacing the Print Cartridge
1
2
Open the top cover by lifting the gray lever on the right side of the top cover. (See page
Remove the print cartridge
Gray Lever
containing the used ribbon and set it
down.
3
Install the new print cartridge, by
first inserting the recessed
and
placing the cartridge into its four
holders.
4
Press down on both sides of the top cover to close it securely.
You can save money by purchasing the 2-PK Refill Ribbon Rolls (PC402RF).
(Installation instructions will be included.) If you handle the print cartridge (frame)
carefully, you can reuse it until it breaks.
13 - 8
T R O U B L E S H O O T I N G A N D R O U T I N E M A I N T E N A N C E
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Setting Up the MFC 660MC
14
and Computer to Work Together
®
Before You Install Multi-Function Link
This chapter takes you through each step of the installation process. Read it carefully
to ensure a problem-free installation.
Package Contents
®
Before you begin the Multi-Function Link installation, please check the contents of
your package:
• Brother CD-ROM
®
• Multi-Function Link Cable and PC I/F Box
• Warranty, Upgrade and Licensing Materials
PC Configuration Requirements
Your PC must meet or exceed the following minimum system configuration
®
requirements for you to install and use Multi-Function Link :
CPU
80486/66 or higher
®
RAM
8MB or greater for Windows 3.1 x
®
8MB or greater for Windows 95 (16MB recommended)
®
16MB or greater for Windows NT Workstation
Version 4.0 (32MB recommended)
®
24MB or greater for windows 98 Second Edition
(32MB recommended)
Hard Disk Drive
50MB
®
Operating System
Port
Windows 3.1x, 95, 98, 98 Second Edition or
®
NT Workstation Version 4.0
Available Serial port
CD-ROM Drive
S E T T I N G U P
M F C
C O M P U T E R T O
T O G E T H E R
14 - 1
Download fromTWH wE w.Som6an6 u0 aMlsC.coAmN.DAll Manuals SearchWAnOdRDKownload.
Connecting the MFC 660MC to Your PC
®
Follow the instructions below to hook up the Multi-Function Link Cable:
1
2
Position your Brother MFC near your personal computer CPU (maximum distance of
approximately 5–6 feet).
Make sure to unplug the machine’s power cord from the electrical outlet before
®
connecting the Multi-Function Link cable.
Also, make sure the computer is turned off and unplugged from the electrical power
®
before you connect the Multi-Function Link cable.
®
3
4
Connect the RJ-8 connector of the Multi-Function Link Cable to the back of your
Brother MFC in the jack labeled PC I/F.
®
Connect the 25-pin male RS-232 connector of the Multi-Function Link Cable to your
PC in the available female serial communications port. Use the 9-pin adapter if your
PC requires it. (See your PC owner’s manual for the correct interface port for
connection.) NOTE: If your PC is an IBM Aptiva, an MWAVE card is using
®
COM1. You must connect the Multi-Function Link Cable to another COM
serial port that is available.
14 - 2
S E T T I N G U P M F C 6 6 0 M C A N D C O M P U T E R T O W O R K T O G E T H E R
Download TfroHmE Www.Somanuals.com. All Manuals Search And Download.
Choosing the Software to Install
®
Install Multi-Function Link Software
®
Click on Install Multi-function Link Software to access the Software Installation
window.
On-Line Documentation
On-Line Documentation includes all the software instructions. To view the On-Line
Documentation, you must first install the Acrobat Reader software from the CD-
ROM, by clicking on the Install Acrobat Reader button.
Product Support
This is a page of all Brother support numbers.
Brother Web Link
Brother WEB Link connects you to the Internet Brother Home Page on the World
Wide Web. You can find more information about Brother products, from product
specifications sheets to Frequently Asked Questions (FAQ’s). You must have service
with an Internet service provider.
Click Exit to exit the CD-ROM window, or click Return to return to the previous
window.
S E T T I N G U P
M F C
C O M P U T E R T O
T O G E T H E R
14 - 3
Download fromTWH wE w.Som6an6 u0 aMlsC.coAmN.DAll Manuals SearchWAnOdRDKownload.
®
Installing the Multi-Function Link Software
IMPORTANT
To install the software using Windows NT R Workstation
Version 4.0, you must be logged on as the Administrator.
Make sure your MFC 660MC is connected to your PC as described earlier and that
both machines are plugged in and switched on.
Overview of Basic Steps
1
Insert the Brother CD-ROM into your CD-ROM drive and access the Installation
Window.
®
2
3
4
Enter the command for your version of Windows , if needed.
®
Select the option Install Multi-Function Link Software.
Follow the installation instructions.
Installing the Brother Software
1
2
Insert the Brother CD-ROM into your CD-ROM drive.
After you insert the Brother CD-ROM, you must type the appropriate command for
®
your version of Windows , if needed:
®
• If you are using Windows 3.1x, from the Program Manager: Click File, then Run,
then type x:SETUP.EXE. (“x” is the drive letter for your CD-ROM drive.) This will
start the Software Installation program.
®
®
• If you are using Windows 95/98 or Windows NT Workstation Version 4.0, the
Software Installation program appears automatically when you insert the Brother
CD-ROM.
®
®
• For Windows 95/98 and Windows NT Workstation Version 4.0, you can also click
Start at the Desktop, select Run and then enter x:\SETUP.EXE. (“x” is the drive letter
for your CD-ROM drive.)
The Brother LOGO will be displayed on the screen.
14 - 4
S E T T I N G U P M F C 6 6 0 M C A N D C O M P U T E R T O W O R K T O G E T H E R
Download TfroHmE Www.Somanuals.com. All Manuals Search And Download.
®
If you are using Windows NT 3.51 or earlier, the following error message will
appear on the screen:
®
®
You are running Windows NT 3.51 or earlier. Brother Multi-Function Link
®
Software does not support this version of Windows NT . YOU MUST UPGRADE TO
WINDOWS NT 4.0 AND REINSTALL Multi-Function Link Software!!
®
®
If you are using Windows NT Workstation 4.0 and you are not logged-in as the
Administrator, an error message will appear explaining the problem.
A window appears listing the options:
®
®
• If you are using Windows 98, the OS detected is shown as “Windows 95”.
®
3
Click on “Install Multi-Function Link Software” and follow the prompts on the
screen.
®
The last step will be to restart Windows .
S E T T I N G U P
M F C
C O M P U T E R T O
T O G E T H E R
14 - 5
Download fromTWH wE w.Som6an6 u0 aMlsC.coAmN.DAll Manuals SearchWAnOdRDKownload.
Viewing On-Line Documentation
Make sure you have installed the Acrobat Reader software. (Click on the Install
Acrobat Reader button and follow the instructions on the screen.)
®
After the Acrobat Reader is installed, click on the View Multi-Function Link
Documentation button. When the Table of Contents appears, select a chapter by
clicking on it.
®
Since the Multi-Function Link manual is in On-line Documentation only, you may
wish to print a copy by selecting Print from the File pull-down menu.
14 - 6
S E T T I N G U P M F C 6 6 0 M C A N D C O M P U T E R T O W O R K T O G E T H E R
Download TfroHmE Www.Somanuals.com. All Manuals Search And Download.
®
15
Using the Multi-Function Link Software
15
(For MFC 660MC Only)
Introduction
This chapter outlines the basics of the Brother software, so you can get started using
®
the Multi-function Link software. Detailed installation and setup instructions are in
the On-Line Documentation section of the Brother CD-ROM that is included with
your MFC. Be sure to check the online ReadMe file for last-minute, important
information that was not included in the On-Line Documentation.
Running the Brother Software
®
The software included with your MFC consists of two parts, the Multi-function Link
®
and ScanSoftTM PaperPort for Brother.
®
T H E M U L T I - F U N C T I O N
S O F T W A R E
M F C
O N L Y )
15 - 1
U S I N G Download from Www.SomanLuaI NlsK.com. All Manuals(SF eOaRrch And6D6o0wMnCload.
®
Multi-Function Link
®
The Multi-Function Link Main Menu is the application used for all fax sending and
receiving operations. It also contains an electronic Phone Book program and a Log
Manager that maintains a record of all PC fax transactions. The Main Menu can be
®
accessed through the Brother Multi-Function Link program group.
TM
®
ScanSoft PaperPort
®
ScansoftTM PaperPort for Brother is a document management application. You will
®
®
use PaperPort to view incoming faxes and scanned documents. PaperPort has a
sophisticated, yet easy to use filing system that will help you organize your
documents. It allows you to combine or “stack” documents of different formats for
®
®
printing, faxing, or filing. PaperPort can be accessed through the PaperPort
program group.
Sending a Fax from Your PC
Sending a Quick Fax
A QuickFax is a cover page only fax with a message. This option is very useful when
you want to fax a quick, short message from your PC.
®
15 - 2
U S I N G T H E M U L T I - F U N C T I O N
S O F T W A R E ( F O R M F C 6 6 0 M C
Download from Www.SomanuaLlsI.cNoKm. All Manuals Search And Download.O N L Y )
1
From the Main Menu, select the QuickFax button
Start pull-down menu. The QuickFax screen will appear:
or select QuickFax from the
2
Enter the Fax number, Name, and Company information in these fields on the
screen—OR—Select the Open Phone Book... button to choose someone from your
phone book.
3
4
Complete the Subject and QuickFax note fields.
Click the Send Fax button.
Sending a Fax from the Main Menu
You can send a fax from the Main Menu and attach multiple files. The “attachments”
can even be in a different formats.
®
T H E M U L T I - F U N C T I O N
S O F T W A R E
M F C
O N L Y )
15 - 3
U S I N G Download from Www.SomanLuaI NlsK.com. All Manuals(SF eOaRrch And6D6o0wMnCload.
1
From the Main Menu window, select the Send Fax
from the Start pull-down menu. The Send Fax window will appear:
—OR—Select Send Fax
2
Enter the Fax number, Name, and Company information in these fields
—OR—Select the Open Phone Book button to choose someone from your phone
book.
3
4
5
Complete the Subject and Cover page note fields.
Click on the Attachments... button to add any file(s) you want to send with it.
Click the Send Fax button.
®
Sending a Fax from a Windows Application
®
You can send a fax directly from any Windows application using the following steps:
®
1
2
Create the document in a Windows application.
Select Brother MFL Fax as your printer.
®
15 - 4
U S I N G T H E M U L T I - F U N C T I O N
S O F T W A R E ( F O R M F C 6 6 0 M C
Download from Www.SomanuaLlsI.cNoKm. All Manuals Search And Download.O N L Y )
3
Select the Print command to begin the fax transmission.
The Fax Sending dialog box will appear:
4
Enter the name and fax number of the recipient or select the Open Phone Book...
button and choose a name. Select Close to return to the Send Fax dialog box.
5
6
Select the Send cover page check box to include a cover page.
Select the Send Fax button.
Receiving Faxes into the PC
To receive faxes into your PC through the MFC, you must first connect your MFC to
your computer. Then, you can load the software.
Before You Begin
Use the following checklists for the MFC and PC, to make sure you have properly set
up the MFC and PC to work together.
Checklist for the MFC:
The default setting for MF Link mode is PC PRIMARY. In this setting all faxes will
be routed into the PC unless it is not turned on. If the PC is turned off, incoming faxes
will be printed on the MFC.
®
T H E M U L T I - F U N C T I O N
S O F T W A R E
M F C
O N L Y )
15 - 5
U S I N G Download from Www.SomanLuaI NlsK.com. All Manuals(SF eOaRrch And6D6o0wMnCload.
1
2
To make sure the MF Link mode is set to PC PRIMARY, press Function/Set, 2, 8.
Use
or
to select PC PRIMARY (or PC RECEIVE ONLY or FAX RECEIVE
ONLY).
3
4
Press Function/Set.
Press Stop to exit.
On your PC:
1
2
3
4
5
6
In the Main Menu, select the Setup pull-down menu.
Select Preferences...
Under Answer Mode, select Fax only.
Click the OK button.
Make sure the MFC is connected to the PC.
®
Keep the PC and the Multi-function Link Main Menu running at all times.
Viewing Received Faxes
Faxes that are received into the PC will appear in the InBox of the Log Manager. To
access the Log Manager, from the Main Menu click the Log Manager button
.
—OR—From the Start pull-down menu, select Mail/Log.
1
2
In the Log Manager, select the Fax folder.
Then select the InBox folder. A listing of your incoming messages will appear on the
right side of the window.
3
Double-click on the fax you wish to view.
The ScanSoft PaperPort Viewer will run automatically and the fax you selected from
the list will be displayed.
®
15 - 6
U S I N G T H E M U L T I - F U N C T I O N
S O F T W A R E ( F O R M F C 6 6 0 M C
Download from Www.SomanuaLlsI.cNoKm. All Manuals Search And Download.O N L Y )
Scanning a Document
®
The Brother Multi-function Link software includes a TWAIN compliant scanner
driver. TWAIN drivers meet the standard universal protocol for communicating
between scanners and software applications. This means that not only can you scan
images directly into the PaperPort viewer that Brother included with your MFC, but
you can also scan images directly into hundreds of other software applications that
support TWAIN scanning. These applications include popular programs like Adobe
Photoshop, Adobe Pagemaker, Corel Draw and many more.
®
To choose the Brother Multi-function Link as your scanner driver, select it under the
“Select scanner” or “Select source” option in your software.
Scanning Options
®
When you scan using the Brother Multi-function Link Scanner driver, a scanning
options dialog box will appear:
Brother Serial MFC
Resolution
200 DPI STD
Contrast
Light
200 DPI FINE
Auto
Dark
400 DPI S.FINE
Image Type
User Defaults
Text
Photo
Status:
Ready
Scan
Cancel
Set the following options based on each document to be scanned, then click the SCAN
button to start scanning.
Resolution
You can choose one of three resolutions, 200 DPI STD, 200 DPI FINE, or 400 DPI
S.FINE. The higher the number of dpi (dots per inch), the clearer the image will
appear on your PC. However, the size of the image file increases with the dpi. Try
scanning at different resolutions to determine the best resolution for your needs.
®
T H E M U L T I - F U N C T I O N
S O F T W A R E
M F C
O N L Y )
15 - 7
U S I N G Download from Www.SomanLuaI NlsK.com. All Manuals(SF eOaRrch And6D6o0wMnCload.
Contrast
To have the scanner adjust the contrast automatically, choose Auto. If your original
is too light, set the contrast to Light. If the original is too dark, set the contrast to Dark.
Image Type
If you are scanning text or black and white line art, choose Text as the image type. If
you’re scanning a photo or detailed picture with many different colors, choose Photo
as the image type.
®
Scanning into the PaperPort Viewer
®
To scan into the PaperPort viewer that was provided with your MFC, run the
®
PaperPort viewer program and then select the SCAN button on the top of the screen
or select ACQUIRE from the File pull-down menu.
®
15 - 8
U S I N G T H E M U L T I - F U N C T I O N
S O F T W A R E ( F O R M F C 6 6 0 M C
Download from Www.SomanuaLlsI.cNoKm. All Manuals Search And Download.O N L Y )
16
Multi-Function Link®
16
(option)
(For FAX 580MC Only)
®
If you have a FAX 580MC, you can purchase the optional Multi-function Link
package (also called “Missing Link”). Multi-Function Link turns your fax machine
into a multifunction center, by enabling you to use your fax machine as a printer and
a scanner and to use it to fax messages from Windows applications in your computer.
®
Multi-function Link is available at most Brother retailers. If you cannot find it, you
®
can order Multi-function Link directly from Brother. The item number is PCI-1.
Installation instructions will be included with PCI-1. However, it is important that you
hook up your fax machine to your computer before you install the software.
®
M U L T I - F U N C T I O N L I N K
( O P T I O N ) ( F O R F A X 5 8 0 M C O N L Y )
16 - 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Type
Desktop facsimile transceiver
Compatibility
Coding System
Modem Speed
Original Input Width
ITU-T Group 3
Modified Huffman (MH)
14400/12000/9600/7200/4800/2400; Automatic Fallback
5.8 inches to 8.5 inches (148 mm to 216 mm)
Scanning/Printing Width 8.2 inches (208 mm)
Paper Tray
Printer Type
Gray Scale
Display
Letter: 50 Sheets; Legal: 30 Sheets
Line Thermal with Ribbon
64 levels (Dithered)
LCD, 16 characters
Polling Types
Contrast Control
Resolution
Standard, Sequential
Automatic/Super Light/Super Dark (manual setting)
• Horizontal 203 dot/inch (8 dot/mm)
• Vertical
Standard—98 line/inch (3.85 line/mm)
Fine, Photo—196 line/inch (7.7 line/mm)
Superfine, Photo (copy)—392 line/inch (15.4
line/mm)
Memory Capacity
One Touch Dial
Speed Dial
512 KB (up to 25 pages*)
4
50 stations
Automatic Redial
Speaker Type
3 times at 5 minute intervals
Full Duplex, Digital
Auto Answer
0, 1, 2, 3 or 4 rings
Communication Source
Operating Environment
Power Source
Public switched telephone network
41 - 95° F
120V AC 50/60Hz (U.S.A., Canadian Version Only)
Standby: under 5 watts — Peak: under 170 watts
13.1 x 11.9 x 11.1 (inches)/ 334 x 301 x 281 (mm)
7.5 lb / 3.4 kg
Power Consumption
Dimensions
Weight
* “Pages” refers to the ITU-T #1 chart (in Out of Paper Reception in ECM mode).
Specifications are subject to change without prior notice.
S - 1
S P E C I F I C A T I O N S
Download from Www.Somanuals.com. All Manuals Search And Download.
G
H
I
R
M
S
O
P
T
I - 2
I N D E X
Download from Www.Somanuals.com. All Manuals Search And Download.
U
V
I N D E X
Download from Www.Somanuals.com. All Manuals Search And Download.
I - 3
I - 4
I N D E X
Download from Www.Somanuals.com. All Manuals Search And Download.
RRemote Retrieval Access Card
If you plan to retrieve voice or fax messages while away from your FAX/MFC,
carrying the Remote Retrieval Access Card printed below will serve as a convenient
reminder of the retrieval procedures. Simply cut out the card and fold it to fit in your
wallet or organizer. Keeping it handy will help you derive the full benefit of your fax
machine’s forwarding, paging and remote retrieval features.
R E M O T E R E T R I E V A L A C C E S S C A R D
Download from Www.Somanuals.com. All Manuals Search And Download.
R - 1
R - 2
R E M O T E R E T R I E V A L A C C E S S C A R D
Download from Www.Somanuals.com. All Manuals Search And Download.
®
Brother International Corporation
100 Somerset Corporate Boulevard
P.O. Box 6911
Bridgewater, NJ 08807-0911 USA
Brother International Corporation (Canada) Ltd.
1 rue Hôtel de Ville,
Dollard-des-Ormeaux, QC, CANADA H9B 3H6
Visit us on the World Wide Web
http://www.brother.com
These machines are made for use in the USA or CANADA only. We can not
recommend using them overseas because it may violate the
Telecommunications Regulations of that country and the power requirements
of your fax machine may not be compatible with the power available in foreign
countries. Using USA or CANADA models overseas is at your own risk
and will void your warranty.
LE4171001
Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|
