data SHEEt
BRocadE
BIGIRoN
RX SERIES
HIGH-
PERFORMANCE
ETHERNET
SWITCHING
Modular Layer 2/3
Ethernet Switches
The role of data networks in our daily lives
continues to expand and grow. Emerging
needs such as application convergence,
non-stop operation, scalability and IPv6-
readiness place new demands on the
network. Modern network solutions must
be assessed across a wider set of attributes
than earlier generation equipment. In
particular, the network must be evaluated on
merits that include performance, reliability,
scalability, quality of service, security and
total cost of ownership (TCO).
Providers (IXPs and ISPs) where non-
blocking, high-density Ethernet switches
are needed.
HigHligHts
• System redundancy (switch, management and
power) across all BigIron RX chassis
• Interchangeable half-height line modules
reduce sparing costs and provide cost-effective
modular growth
All four BigIron RX systems are designed
for non-stop operation, supporting 1:1
management module redundancy, N+1
switch module redundancy, M+N power
module redundancy and N+1 fan redundancy.
Additionally, the BigIron RX Series supports
hitless Layer 2 software upgrades and graceful
restart routing for fast convergence in the
event of a management module failure.
• Compact chassis design supports very high-
density single rack configurations—up to 192
wire-speed 10-Gigabit Ethernet and 2,304
wire-speed Gigabit Ethernet in standard
7-foot Telco rack
• Scalable hardware-based IP routing to
512,000 IPv4 routes per line module
The Brocade® BigIron® RX Series of Layer 2/3
Ethernet switches excels in all of these
areas, enabling network designers to deploy
an Ethernet infrastructure that addresses
today’s requirements with a scalable
architecture designed to support network
growth and evolution. The BigIron RX Series
incorporates the latest advances in switch
architecture, system resilience, quality of
service and switch security in a family of
modular chassis setting leading industry
benchmarks for price-performance,
• Powerful suite of unicast and multicast IPv4
and IPv6 protocol support
At the heart of the BigIron RX architecture
is an adaptive self-routing Clos switch fabric
with a virtual output queue (VOQ) design.
This non-blocking architecture is optimized
for maximum throughput and low latency for
• Advanced virtual output queue (VoQ) design
eliminates head of line blocking and provides
scalable QoS
• End to End QoS supported with hardware
based honoring and marking and congestion
management
• High-capacity 80 Gbps cross-module
link aggregation supports high-bandwidth
inter-switch trunking
• High-availability design features redundant
and hot-pluggable hardware, hitless Layer 2
software upgrades and graceful BGP and
OSPF restart
scalability and TCO.
Available in four chassis models, the
• Advanced non-blocking Clos fabric features
adaptive self-routing with graceful system
degradation in the event of two or more
module failures
BigIron RX Series allows network designers
to standardize on a single product family
for aggregation and backbone switching.
In addition to its enterprise role, the BigIron
RX Series, with its high-density and compact
design, is an ideal IP solution for high-
performance computing environments and
Internet Exchanges and Internet Service
• Embedded sFlow per port supports scalable
hardware-based traffic monitoring across all
switch ports without impacting performance
Download from Www.Somanuals.com. All Manuals Search And Download.
• metro ring Protocol (mrP):
• Configurable Combinations of Queuing
Disciplines and Congestion Control
Policies: Combinations of Strict Priority (SP)
and Weighted Fair Queuing (WFQ) provide
flexibility for network administrators. In
the event of egress port congestion,
traffic policies can be configured for tail
drop or weighted random early detection
(WREd) operation.
– ease of administration: Identify an ACL
by name or number, or add a comment
line for ease of administration
An alternative to Spanning Tree Protocol,
MRP provides sub-second fault detection
and failover for Ethernet ring topologies.
MRP works in conjunction with VSRP
and 802.3ad based link aggregation to
provide bandwidth scalability and SoNEt-
like resilience.
– secure shell and secure Copy:
Provides secure access to the
administration and management
interface over the network
• Protection against Denial of service
(Dos) attacks: Prevents or minimizes
network downtime from malicious users
by limiting tcP SYN and IcMP traffic and
protects against broadcast storms
• Virtual switch redundancy Protocol
(VsrP): Supports sub-second fault
detection and fail-over for mesh topologies
in which redundant switches provide
back-up operation for one another
• advanced bandwidth management:
Allows intelligent bandwidth management
using hardware based enforcement of
Committed Information Rate (CIR) with
Excess Burst control capabilities and
seamless integration with other advanced
QoS features including priority marking
and honoring.
• user authentication: Authentication with
aaa, 802.1x, RadIUS, tacacS, and tacacS+
prevents unauthorized network access
• single-instance stP: Provides a single
instance of STP to run on all port-based
VLaNs within a single device, interoperable
with others that are 802.1d compliant
• maC Port security: Controls the MAC
addresses allowed per port
Cohesive, Unified and Easy-to-Use
network management
• rapid spanning tree Protocol based
on ieee 802.1w: Dramatically improves
the spanning tree convergence time to sub-
second by automatically renegotiating port
roles in case of a link failure without relying
on timers
• sFlow (rFC 3176): Provides cost-effective,
scalable, wire-speed network monitoring
to detect unusual network activity
• Centralized network management:
Brocade IronView Network Manager is a
Web-based, graphical interface tool that
empowers network operators to seamlessly
control software and configuration updates
• snmPv3: Secured SNMP management
with authentication and privacy services
• Per Vlan spanning tree (PVst): Allows
for control of StP on an individual VLaN
basis for traffic engineering VLaN traffic
(i.e., load distribution)
• bgP-guard: Complements MD5 security
for BGP sessions to protect against session
disruption by restricting the number of
hops the BGP session can traverse
• Command line interface (Cli):
Industry-standard configuration interface,
consistent and common throughout
Brocade products
• topology groups: Dramatically improves
Layer 2 control protocol scalability by
allowing a few instances of STP, RSTP,
MRP, or VSRP to control large groups
of VLaNs
• web interface: Provides easy-to-use
Graphical User Interface (GUI) for system
configuration from standard Web browsers
• sFlow (rFC 3176): Provides scalable,
wire-speed network monitoring and
accounting with no impact on network
performance
• super aggregated Vlans (saVs): Allows
transparent tunneling of multiple VLaNs
through a single backbone VLaN
• Pim and igmP snooping: offers efficient
handling of multicast traffic in Layer 2
topologies by identifying ports that request
a multicast stream and forwarding the
stream only on these ports. This dramatically
improves the performance of multicast
applications, allowing for many more
streams to be transiting the network.
brocade ironshield security
• wire-speed extended layer 2, layer 3
and 4 access Control lists (aCl): Control
packet forwarding and restricts access to
the system management interface, while
providing wire-speed switching and routing:
– extensible aCl implementation for
layer 3 and 4 information: Identifies
traffic based on source or destination
IP address, IP protocol type, TCP or
UDP port, IP precedence or ToS values
advanced Quality of service
• advanced Qos: Allows administrators to
enforce QoS policies based on port, VLaN,
source Mac, acL rules, 802.1p priority,
Type of Service (ToS), DiffServ settings or
Rate Limiting status
– Flexible aCl implementation for
layer 2 information: Identifies traffic
based on source or destination MAC
address, Ethernet type, VLaN-Id
values and 802.1p values
• Very low latency across all Packet sizes:
Consistent low latency for strict priority
applications such as voice over IP, high
performance computing and video over IP
– aCl scalability: Support for up to
8,000 acLs
Download from Www.Somanuals.com. All Manuals Search And Download.
hardware-based QoS features of the RX Series.
Wire-speed security is maintained by locking
out unauthorized users with port security,
by filtering doS and unauthorized traffic with
acLs, and by monitoring traffic flows with
sFlow. The BigIron RX Series allows you to
grow from just 24 ports of 10/100/ 1000 at
the edge up to 1,536 ports of 10/100/ 1000
or 128 ports of 10-Gigabit Ethernet in the
core. The BigIron RX Series provides one
common architecture that meets the demands
of today’s, and tomorrow’s Enterprise network
needs with high performance, resiliency,
security and scalability with low TCO.
The BigIron RX Series addresses these
needs by acting as the gateway and switch
fabric of the data center. The density of
the RX Series allows for growth from the
smallest to the largest data center. Port
aggregation allows for high performance
interconnects up to 80 Gbps increasing the
availability of the server farm.
aPPliCations
brocade enterprise infrastructure
solutions
today’s Enterprise network is critical to
the ongoing operations of the organization.
Network administrators are concerned about
zero downtime on the network, securing the
network from DoS attacks, cyber-spying, and
malicious users, and maintaining data integrity
and confidentiality, without adding excessive
cost or impacting performance. All this in a
structure that allows for graceful growth as
the Enterprise grows.
Brocade hardware based IronShield security
features protect the server farm against
Denial of Service (DoS) attacks and provide
security for maintaining network integrity.
The sFlow functionality supplies the network
access information required to track who
has accessed which server on the network
as a means to provide network usage audit
trails. Utilizing Brocade wire-speed switching
and filtering to screen and direct traffic to
the appropriate server and block undesired
traffic with minimal latency ensure the
optimal operation, security and integrity
of the network and data center.
The BigIron RX Series incorporates exceptional
resiliency, security and scalability in an
architecture designed to scale from the edge
to the core to minimize TCO. The resilient
design includes redundant management
modules, switch fabrics, fans and power
supplies. This hardware resiliency is enhanced
with software resiliency including hitless
system failover, graceful restart, MRP, VSRP,
and VRRP for Layer 2 and Layer 3 resiliency.
High priority voice and data traffic fly through
the chassis utilizing the high performance
brocade for enterprise and application
Hosting solutions
Data centers are the core of business
operations requiring high density, high
performance, high security and low latency
switching to ensure connectivity to mission
critical applications. The increasing value
of the data center to business operations
necessitates that data and network integrity,
confidentiality and security must be maintained
without impacting performance.
Figure 1.
Enterprise infrastructure
BigIron RX-32
FastIron SuperX
solutions.
1-GbE
Cluster
10/100/1000 Wiring Closet
Computing
BigIron RX-4
10-GbE
NAS
App
1-GbE 802.3AD
link aggregation
Servers
Fiber Distribution
Fiber Distribution
10/100/1000 Aggregation
10/100/1000 Aggregation
Figure 2.
Enterprise and application
hosting solutions.
BigIron RX-16
BigIron RX-32
10-GbE
10-GbE data servers
BigIron RX-32
1-GbE
Data Center Routing and
Switching Access
1 and 10-GbE front end application servers
Download from Www.Somanuals.com. All Manuals Search And Download.
performance architecture offers up to
3.2 tbps of data switching capacity to
meet the needs of the most demanding
HPC environment. The combination of
performance, density and reliability makes
the BigIron RX Series an excellent choice
for Enterprise HPc environments.
brocade for internet exchange
solutions
brocade for High-Performance
Computing solutions
High-performance computing has entered
the mainstream marketplace with Ethernet
switching as the technology of choice. Ultra-low
latency and high-density Ethernet switching
are required for successful deployment.
Internet Exchanges (IX) demand high-
performance Layer 2 topologies with high
density Gigabit and 10-Gigabit Ethernet ports.
These cross-roads of the Internet connect
high-performance routers from many Service
Providers in peering relationships without
requiring a full mesh of router ports.
The BigIron RX Series chassis are ideal
for this environment. They offer low latency
through the switch with unparalleled
densities of 10/100/1000 Ethernet, fiber
Gigabit Ethernet and 10-Gigabit Ethernet in
compact size chassis—up to 1,536 ports of
Gigabit Ethernet or 128 ports of 10-Gigabit
Ethernet in a single chassis. the high-
The BigIron RX Series excels in this
environment. offering high density 1-Gigabit
and 10-Gigabit Ethernet together with the
resiliency features of the chassis make the
BigIron RX Series an extremely cost effective
and robust solution.
Figure 3.
Internet exchange
solutions.
BigIron RX-16
BigIron RX-16
NetIron Router
NetIron Router
10-GbE
10-GbE
BigIron RX-32
Service Provider
Service Provider
NetIron Router
NetIron Router
10-GbE
10-GbE
BigIron RX-16
BigIron RX-16
Service Provider
Service Provider
Exchange L3 Core
Figure 4.
High-performance
computing solutions.
BigIron RX-32
BigIron RX-8
BigIron RX-8
Storage
Storage
Processors
Download from Www.Somanuals.com. All Manuals Search And Download.
broCaDe bigiron rX series sPeCiFiCations
General Protocols
– RFc 791 IP
ieee Compliance
– RFc 792 IcMP
– 802.3ae 10-Gigabit Ethernet
– 802.3x Flow control
– RFc 793 tcP
– RFc 783 tFtP
– 802.3ad Link aggregation
– 802.1Q VLaN tagging
– 802.1d Bridging
– RFc 826 aRP
– RFC 768 UDP
– RFc 894 IP over Ethernet
– RFc 903 RaRP
– 802.1w Rapid StP
– 802.1s Multiple Spanning tree Protocol
– 802.1X User authentication
– 802.3 Ethernet Like MIB
• RFc 906 tFtP Bootstrap
• RFc 1027 Proxy aRP
• RFc 950 Subnets
rFC Compliance
• RFc 951 BootP
BGPv4
• RFc 4271 BGPv4
• RFc 1122 Host Requirements
• RFc 1256 IRdP
• RFc 1745 oSPF interactions
• RFc 1997 communities & attributes
• RFc 2439 route flap dampening
• RFc 2796 route reflection
• RFc 1519 cIdR
• RFc 1542 BootP Extensions
• RFc 1812 General Routing
• RFc 1541 and 1542 dHcP
• RFc 2131 BootP/dHcP Helper
• RFc 3768 VRRP
• RFc 3065 BGP4 confederations
• RFc 3392 capability advertisement
• RFc 2918 Route Refresh capability
• RFc 1269 Managed objects for BGP
• RFc 1657 Managed objects for BGP-4 using SMIv2
• RFc 854 tELNEt
• RFc 1591 dNS (client)
• RFc 2784 GRE
• RFc 3682 Generalized ttL Security Mechanism for
eBGP Session Protection
• RFc 1191 Path MtU discovery
• RFc 896 congestion control
• RFc 3635 Pause control
• RFc 1858 IP Fragment Filtering
• RFc 1340 assigned Numbers
• RFc 2578 SMIv2
• RFc 2385 BGP Session Protection via tcP Md5
• draft-ietf-idr-restart Graceful Restart for BGP
• draft-ieft-idr-route-filter
OSPF
• RFc 2178 oSPF
• RFc 1583 oSPF v2
Others
• RFc 3101 oSPF NSSa
• RFc 2579 textual conventions for SMIv2
• RFc 2665 Ethernet Interface MIB
• RFc 1354 IP Forwarding MIB
• RFc 1757 RMoN Groups Partial 1, full for 2, 3, 9
• RFc 2068 HttP
• RFc 1745 oSPF Interactions
• RFc 1765 oSPF database overflow
• RFc 1850 oSPF v2 MIB and traps
• RFc 2154 oSPF w/digital Signatures (Password, Md-5)
• RFc 2328 oSPF v2
• RFc 2030 SNtP
• RFc 2370 oSPF opaque LSa option
• RFc 3623 Graceful oSPF Restart
• RFc 1195 Routing in tcP/IP and dual Environments
• RFc 2763 dynamic Host Name Exchange
• RFc 2966 domain-wide Prefix distribution
• RFc 3567 IS-IS cryptographic authentication (MdS)
• RFc 1058 RIP v1
• RFc 2138 RadIUS
• RFc 3176 sFlow
IS-IS
• draft-ietf-tcpm-tcpsecure-00
• RFc 2373 IPv6 addressing architecture
• RFc 1886 dNS Extensions to support IPv6
• RFc 1887 IPV6 Unicast address allocation architecture
IPv6 Core
RIP
• RFc 2374 IPv6 aggregatable global Unicast address
format
• RFc 1723 RIP v2
• RFc 1812 RIP Requirements
• RFc 1122 Host Extensions
• RFc 1256 IcMP Router discovery Protocol
• RFc 1112 IGMP
• RFc 2450 Proposed tLa and NLa assignment Rules
• RFc 2471 IPv6 testing address allocation
• RFc 2526 Reserved IPv6 subnet anycast address
• RFc 2928 Initial IPv6 sub tLa Id assignments
• RFc 2460 IPv6 Specification
IP Multicast
• RFc 2236 IGMP v2
• RFc 2362 PIM-SM
• RFc 2461 IPv6 Neighbor discovery
• RFc 3973 PIM-dM
• RFc 2462 IPv6 Stateless address auto-configuration
• RFc 4443 IcMPv6
• PIM-dM v1
• dVMRP v3-07
• RFc 3513 IPv6 addressing architecture
• RFc 1981 IPv6 Path MtU discovery
• RFc 1075 dVMRP v2
• RFc 2336 IGMP v2
• RFc 3587 IPv6 Global Unicast address Format
• RFc 2375 IPv6 Multicast address assignments
• RFc 3618 MSdP
• RFc 2283 MBGP
• RFc 2464 transmission of IPv6 over Ethernet
Networks
• RFc 2858 BGP-MP
• RFc 3376 IGMP v3
• RFc 2711 IPv6 Router alert option
• RFc 3363 dNS support
• RFc 3446 anycast RP
• RFc 4541 considerations for IGMP and MLd Snooping
Download from Www.Somanuals.com. All Manuals Search And Download.
IPv6 Routing
• RFc 2080 RIPng for IPv6
safety agency approvals
• RFc 2740 oSPFv3 for IPv6
• caN/cSa-c22.2 No.60950-00/UL 60950—third Edition, Safety of
Information technology Equipment
• IEtF draft_ietf_isis_IPv6 IS-IS for IPv6
• RFc 2545 Use of MP-BGP-4 for IPv6
• RFc 2362 PIM-SM
• EN 60825-1 Safety of Laser Products—Part 1: Equipment classification,
Requirements and User’s Guide
IPv6 Multicast
• EN 60825-2 Safety of Laser Products—Part 2: Safety of optical Fibre
Communication Systems
• RFc 2710 Multicast Listener discovery (MLd) for IPv6
• RFc 3306 Unicast-Prefix-based IPv6 Multicast
Addresses
• EN 60950 Safety of Information technology Equipment
Electromagnetic Emission Certification
• cSa 950 Electromagnetic Emission certification
• FCC Class A
• RFc 3810 MLdv2
• RFc 4602 PIM-SM (Partial address)
• draft-holbrook-idmr-igmpv3-ssm—IGMPv3 & MdLV2
for SSM
• EN 55022/cISPR-22 class a/ VccI class a
• IcES-003 Electromagnetic Emission
• draft-ietf-ssm-arch SSM for IP
IPv6 Transitioning
• RFc 2893 transition Mechanisms for IPv6 Hosts
and Routers
immunity
• EN 61000-3-2 Power Line Harmonics
• EN 61000-4-2 ESd
• RFc 3056 connection of IPv6 domains via IPv4 clouds
network management
• EN 61000-4-3 Radiated Immunity
• EN 61000-4-4 EFt
• IronView Network Manager (INM) Web-based graphical user interface
• Integrated Standard-based Command Line Interface (CLI)
• RFc 3176 sFlow
• EN 61000-4-5 Surge
• EN 61000-4-6 Low Frequency common Immunity
• EN 61000-4-11 Voltage dips and Sags Generic: EN50082-1
• ESd: IEc 61000-4-2; 4 kV cd, 8 kV ad
• Radiated: IEc 61000-4-3;3 V/m
• EFt/Burst: IEc 61000-4-4;1.0 kV (power line), 0.5 kV (signal line)
• conducted: IEc 61000-4-6; 3 V
• RFc 854 telnet
• RFc 2068 HttP
• RFc 2578 and 3410 SNMPv2 and v3
• RFc 1757 RMoN Group partial 1, full 2, 3, and 9
• HP openView for Sun Solaris, HP-UX, IBM’s aIX, Linux and Windows Nt
• SNMP MIB II
environmental regulatory Compliance
• EU 2002/95/Ec RoHS (with lead exemption)
• EU 2002/91/Ec WEEE
element security options
• AAA
• RADIUS
warranty
• Secure Shell (SSH v2)
• 1-year hardware
• 90-day software
• Secure Copy (SCP)
• tacacS/tacacS+
mounting options
• Username/Password (challenge and Response)
• Bi-level access Mode (Standard and EXEc Level)
• Protection for denial of Service attacks, such as tcP SYN or Smurf attacks
• 19 Universal EIa 310 (telco) Rack or tabletop
environmental
• operating temperature: 0° c to 40° c (32° F to 104° F)
• Relative Humidity: 5 to 90% at 40° c (104° F), non-condensing
• operating altitude: 10,000 ft (3,000 m)
• Storage temperature: -25º c to 70º c (-13º F to 158° F)
• Storage Humidity: 95% maximum relative humidity, non-condensing
• Storage altitude: 15,000 ft (4,500 m) maximum
broCaDe bigiron rX series system sPeCiFiCations
system max
@ 100 VaC
@ 200 VaC
@ -48 VDC
Current
Amps
Power
Watts
Thermal
Output
BtU/Hr
Current
Amps
Power
Watts
Thermal
Output
BtU/Hr
Current
Amps
Power
Watts
Thermal
Output
BtU/Hr
BigIron RX-32
BigIron RX-16
BigIron RX-8
BigIron RX-4
N/a
49
24
N/a
N/a
57
24
12
6
11,353
4,905
2,417
1,217
38,746
16,741
8,249
4,155
237
102
50
11,353
4,905
2,417
1,217
38,746
16,741
8,249
4,155
4,905
2,417
1,217
16,741
8,249
4,155
12
25
Download from Www.Somanuals.com. All Manuals Search And Download.
data SHEEt
broCaDe bigiron rX series PHysiCal sPeCiFiCations
Dimensions
weight
BigIron RX-32
BigIron RX-16
BigIron RX-8
BigIron RX-4
17.45w x 57.71h x 24.1d
17.45w x 24.47h x 25.5d
17.45w x 12.21h x 22.5d
17.45w x 6.96h x 22.5d
44.32w x 146.58h x 61.21d cm
44.32w x 62.15h x 64.77d cm
44.32w x 31.01h x 57.15d cm
44.32w x 17.68h x 57.15d cm
approx 478 lbs
236 lbs
approx 217 kg
107 kg
131 lbs
60 kg
78 lbs
35 kg
orDering inFormation
RX-BI-MR2
Management Module for BigIron RX Series,
2GB memory
Part number
BI-RX-32-ac
BI-RX-16-ac
BI-RX-8-AC
BI-RX-4-ac
BI-RX-32-dc
BI-RX-16-dc
BI-RX-8-DC
BI-RX-4-dc
RX-BI2XG
Description
BigIron RX-32 ac system
BigIron RX-16 ac system
BigIron RX-8 AC system
BigIron RX-4 ac system
BigIron RX-32 dc system
BigIron RX-16 dc system
BigIron RX-8 DC system
BigIron RX-4 dc system
RX-BI-SFM1
Switch Fabric Element for BigIron RX-4
Switch Fabric Element for BigIron RX-8 and RX-16
Switch Fabric Element for BigIron RX-32
BigIron RX-32 ac power supply
RX-BI-SFM3
RX-BI-32-SFM
RX-32-acPWR
RX-32-dcPWR
RX-ACPWR-B-SYS
RX-ACPWR-F-SYS
BigIron RX-32 dc power supply
90 – 264 Vac power supply for BigIron RX-4 chassis
90 – 264 Vac power supply for BigIron RX-8 and RX-16
chassis
2-port 10-Gigabit Ethernet XFP module
for BigIron RX Series
RX-DCPWR-B-SYS
RX-DCPWR-F-SYS
-48 Vdc power supply for BigIron RX-4 chassis
-48 Vdc power supply for BigIron RX-8 and
RX-16 chassis
RX-BI4XG
4-port 10-Gigabit Ethernet XFP module
for BigIron RX Series
10G-XFP-SR
10G-XFP-LR
850nm serial pluggable XFP optic only (Lc) over MMF
RX-BI24c
24-port 10/100/1000 Ethernet RJ-45 module
for BigIron RX Series
1310nm serial pluggable XFP optic only (Lc) for up to
10km over SMF
RX-BI24F
24-port Gigabit Ethernet SFP module
10G-XFP-ER
10G-XFP-ZR
1550nm serial pluggable XFP optic only (Lc) for up to
40km over SMF
for BigIron RX Series
RX-BI24HF
RX-BI48t
24-port 100/1000 Ethernet SFP module
for BigIron RX Series
1550nm serial pluggable XFP optic only (Lc) for up to
80km over SMF
48-port 10/100/1000 Ethernet MRJ-21 module
for BigIron RX Series
RX-BI-32-MR
RX-BI-32-MR2
RX-BI-MR
Management module for BigIron RX-32 chassis,
512MB memory
Management module for BigIron RX-32 chassis,
2GB memory
Management Module for BigIron RX Series chassis,
512MB memory
Corporate Headquarters
San Jose, ca USa
european Headquarters
Geneva, Switzerland
Asia Pacific Headquarters
Singapore
t: +1-408-333-8000
t: +41-22-799-56-40
t: +65-6538-4700
© 2009 Brocade communications Systems, Inc. all Rights Reserved. 1/09 Ga-dS-1267-00
Brocade, the B-wing symbol, BigIron, dcX, Fabric oS, FastIron, IronPoint, IronShield, IronView, IronWare, Jetcore, NetIron,
SecureIron, ServerIron, StorageX, and turboIron are registered trademarks, and dcFM, Extraordinary Networks, and
SaN Health are trademarks of Brocade communications Systems, Inc., in the United States and/or in other countries.
All other brands, products, or service names are or may be trademarks or service marks of, and are used to identify,
products or services of their respective owners.
Notice: this document is for informational purposes only and does not set forth any warranty, expressed or implied,
concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the
right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This
informational document describes features that may not be currently available. contact a Brocade sales office for
information on feature and product availability. Export of technical data contained in this document may require an
export license from the United States government.
Download from Www.Somanuals.com. All Manuals Search And Download.
|