DATA SHEET
BROCADE
NETIRON XMR
4000, 8000
16000, 32000
HIGH-
PERFORMANCE
BACKBONE
ROUTING
IPv4/IPv6/MPLS Multi-Service
Backbone Routers
Today’s service providers face market
challenges that require a new breed
of solutions to ensure successful and
profitable operation. Service providers
operate in an environment of fierce
this series comprises the industry’s most
powerful, high density IPv4/ IPv6/MPLS
multi-service routers. To enable the
deployment of scalable, high value, and
profitable services, the NetIron XMR Series
offers highly versatile, cost-efficient solutions
for Internet routing, inter-Metro backbones,
large scale multi-service backbones, and IP
carrier’s carrier transport.
HIGHLIGHTS
• 4-, 8-, 16-, and 32-slot high-end
IPv4/IPv6/MPLS multi-service routers
• Terabit-scale architecture offering up to
3.2 Tbps data capacity and approximately
2 billion pps per system
competition that continues to drive service
pricing down. A smooth introduction of new,
reliable, and scalable services is difficult
for many service providers, yet, it is crucial
to expanding the subscriber base and
improving subscriber retention. Adding to
these challenges is an exponential growth
trend in Internet traffic that continues to
erode network capacities. Furthermore,
ensuring and increasing profitability, which
require controlling Capital Expenditures
CapEx) and Operational Expenditures (OpEx),
are key goals for any service provider.
• Up to 128 10-GbE/640 1-GbE/64
OC-192/256 OC-48 ports per system
• Built for scalable routing via OSPF, IS-IS,
BGP, OSPFv3, RIPng, PIM-DM/SM/SSM
The Brocade NetIron XMR Series includes
the 4-slot NetIron XMR 4000, 8-slot NetIron
XMR 8000, the 16-slot NetIron XMR 16000,
and the 32-slot NetIron XMR 32000. The
series offers industry-leading port capacity
and density for both Carrier Ethernet and
Packet over SONET/SDH (POS) with up
to 128 10-GbE, 640 1-GbE, 64 OC-192
(STM-64), or 256 OC-48 (STM-16) ports in a
single chassis, high density router.
• Up to 1 million IPv4 routes in hardware to
support future growth
• Carrier class IPv4, IPv6, and MPLS routing
featuring Brocade Direct Routing (FDR)
technology
• High-capacity MPLS Layer 3/Layer 2 VPNs
and IP over MPLS routing
The Brocade® NetIron® XMR Series routers
are built to address all these hurdles by
offering state-of-the-art design in hardware
and software. Based on a superior terabit-
scale architecture that includes cutting-
edge, fifth-generation network processors,
• Enables virtual routing in non-MPLS
environments via Multi-VRF
• Highly resilient architecture offering
redundant management modules, switch
fabrics, power supplies, cooling, and
hitless failover
• Flexible SONET/SDH support via either
native POS interfaces or 10-GbE WAN PHY
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY FEATURES
Service provider-grade IPv4/IPv6/MPLS multi-service backbone routers
4-, 8-, 16-, and 32-slot systems for maximum deployment versatility
Security is an increasing concern for today’s
operators, and the Brocade NetIron XMR
routers offer a powerful set of security
mechanisms that allow operators to enhance
both infrastructure security and subscriber
security. The NetIron XMR routers feature
highly scalable inbound and outbound
ACLs, which allow operators to implement
IPv4, IPv6, and Layer 2 security policies.
These policies can be applied permanently
or on demand without impacting normal
operations. Receive ACLs further harden
platform and infrastructure security, allowing
operators to implement strict policies for
controlling management traffic and control
traffic. To counter IP address spoofing used in
many forms of DoS attacks, the NetIron XMR
routers offer hardware-based wire-speed
Unicast Reverse Path Forwarding (uRPF) for
both edge applications (strict mode), and
backbone applications (loose mode). uRPF
allows the routers to check the packet’s
source IP address against the routing table
to ensure that the packet came from a valid,
and expected, source network.
Terabit-scale architecture designed for massive 10-GbE and OC-192 scalability
Performance of competitor multi-chassis routers in a fraction of the rack space:
• Up to 2 billion pps routing performance with non-blocking 3.2 Tbps data capacity
Industry-leading port capacity for a single chassis router:
• 128 10 Gigabit Ethernet/640 Gigabit Ethernet ports
• 64 OC-192/256 OC-48 ports
Wire-speed dual stack IPv4/IPv6 routing
Wire-speed edge (PE) and core (P) Label Switching Routers
Industry-leading performance for MPLS services providing concurrent IP over
MPLS, Virtual Leased Lines (VLLs), Virtual Private LAN Services (VPLSes), and
BGP/MPLS VPNs at wire speed
High-performance, robust routing via Brocade Direct Routing (FDR) for complete
programming of the Forwarding Information Base (FIB) in hardware
Full suite of unicast and multicast IPv4 and IPv6 routing protocols:
• Supported IPv4 protocols include RIP, OSPF, BGP-4, IS-IS, PIM-DM, PIM-SM/SSM, IGMP,
BGP-MP for multicast, and MSDP
• Supported IPv6 protocols include RIPng, OSPFv3, IS-IS for IPv6, BGP-MP for IPv6
(BGP4+), PIM-SM/SSM, and MLD
Comprehensive MPLS signaling and path calculation algorithms for both traffic
engineered and non-traffic engineered applications:
Using the Brocade NetIron XMR routers,
operators can combine the benefits of
SONET/SDH long haul transport and the
abundance of cost-effective capacity of
Carrier Ethernet in many POPs. The routers
offer a portfolio of native POS interfaces
with speeds ranging from OC-12 (STM-4)
to OC-192 (STM-64), allowing for native
connectivity to SONET/SDH optical transport
equipment or to existing POS routers with
distances up to 80 km. Carrier Ethernet
interfaces offer distances up to 80 km for 10-
GbE, and up to 150 km for GbE. In addition,
the routers offer operators cost-effective
10-GbE transport over OC-192 (STM-64) links
using IEEE standard 10-GbE WAN PHY.
• OSPF-TE, IS-IS-TE, RSVP-TE, CSPF
• LDP
Powerful Multi-VRF Routing supports virtual routing applications over
non-MPLS backbones
Industry-leading scalability up to:*
• 10 million BGP routes
• 1 million IPv4 routes in hardware (FIB)
• 240,000 IPv6 routes in hardware (FIB)
• 2000 BGP peers per system
• 2,000 BGP/MPLS VPNs and up to 1 million VPN routes
• 32,000 VLLs per system
• 16,000 VPLSes and up to 1 million VPLS MAC addresses
• 4,094 VLANs and up to 2 million MAC addresses8-path Equal Cost Multipath (ECMP)
Superior high-availability design:
• Redundant management modules
• Redundant switch fabrics
• Redundant power supplies and cooling system
• Hitless Layer 3 and Layer 2 failover with OSPF and
• BGP graceful restart
• Hitless (in-service) software upgrades leveraging graceful restart
* Scalability limits dependent on configured system parameters, system profile selected, and routing database complexity.
Download from Www.Somanuals.com. All Manuals Search And Download.
KEY FEATURES CONTINUED
Rapid link/node failure detection with advanced traffic protection:
• BFD for rapid detection of neighbor/adjacency failure
• Brocade UDLD and IEEE LFS for fast detection of link problems
• MPLS FRR and Hot Standby paths for traffic protection
• Distributed, scalable, wire-speed tunneling for IPv4 over GRE, and IPv6 over IPv4
Industry leading 320 Gbps link aggregation capability for aggregating up to 32
10GbE/OC-192 links in provider backbones
Advanced QoS:
• Eight distinct priority levels
• Weighted Random Early Discard (WRED) support for congestion management and
precedence dropping (tunable via configuration)
• Support for hybrid queue servicing disciplines: Strict Priority + Weighted Fair Queuing
State-of-the-art policy enforcement and monitoring for enforcing SLAs and
implementing security policies:
• Two rate three color traffic policers
• Traffic policer accounting
• Layer 3 and Layer 2 ACLs
• Granular ACL accounting
• Hardware-based packet filtering
• Hardware-based policy based routing (PBR)
• Unicast Reverse Path Forwarding (uRPF)
• Receive ACLs
• Extensive sFlow Layer 2-7 traffic monitoring for IPv4,
• IPv6 and MPLS services
Combine both Carrier Ethernet and powerful Packet over SONET/SDH:
• MEF 9 and MEF 14 certified for offering Carrier Ethernet services
• Flexible set of POS interfaces with carrier class timing offering internal stratum 3, loop,
line, and BITS timing support
BROCADE NETIRON XMR SERIES AT A GLANCE
Features
NetIron XMR 4000
NetIron XMR 8000
NetIron XMR 16000
NetIron XMR 32000
Interface Slots
4
8
16
32
Switch Fabric Capacity
Data Forwarding Capacity
Packet Routing Performance
Full Duplex
960 Gbps
400 Gbps
1.92 Tbps
800 Gbps
3.84 Tbps
1.6 Tbps
7.68 Tbps
3.2 Tbps
240 million pps
480 million pps
~1 billion pps
~2 billion pps
3+1
~2 billion pps
~4 billion pps
7+1
Total
480 million pps
960 million pps
Switch Fabric Redundancy
Max 10-GbE Ports
Max 1-GbE Ports
2+1
2+1
16
32
64
128
80
160
320
640
Max OC-192 (STM-64) Ports
Max OC-48 (STM-16) Ports
Height (inches/rack units)
Power Supply Redundancy
Air Flow
8
16
32
64
32
64
128
256
6.96’’/4RU
M+N
12.21’’/7RU
M+N
24.47’’/14RU
M+N
57.71’’/33RU
M+N
Side to side
Side to side
Front to back
Front to back
Download from Www.Somanuals.com. All Manuals Search And Download.
BROCADE NETIRON XMR SERIES POWER SPECIFICATIONS
NETIRON XMR 4000
NETIRON XMR 8000
NETIRON XMR 16000 NETIRON XMR 32000
Maximum DC Power Consumption (W)
1,384
1,384
2,750
2,750
5,572
5,572
11,353
11,353
Maximum AC Power Consumption (W)
(100-240 VAC)
Maximum Thermal Output (BTU/HR)
4,724
9,386
19,017
38,476
BROCADE NETIRON XMR SERIES PHYSICAL SPECIFICATIONS
Dimensions
Weight
NetIron XMR 4000
NetIron XMR 8000
NetIron XMR 16000
NetIron XMR 32000
17.45”w x 6.96”h x 22.5”d
17.45”w x 12.21”h x 22.5”d
17.45”w x 24.47”h x 25.5”d
17.45”w x 57.71”h x 24.1”d
44.32w x 17.68h x 57.15d cm
44.32w x 31.01h x 57.15d cm
44.32w x 62.15h x 64.77d cm
44.32w x 146.58h x 61.21d cm
78 lbs
35 kg
60 kg
107 kg
131 lbs
236 lbs
approx 478 lbs
approx 217 kg
BROCADE NETIRON XMR SERIES SPECIFICATIONS
IEEE Compliance
RIP
• RFC 1058 RIP v1
• RFC 1723 RIP v2
• 802.3-2005 CSMA/CD Access Method and Physical Layer Specifications
• 802.3ab 1000BASE-T
• RFC 1812 RIP Requirements
• 802.3ae 10 Gigabit Ethernet
• 802.3x Flow Control
IPv4 Multicast
• RFC 1122 Host Extensions
• RFC 1112 IGMP
• 802.3ad Link Aggregation
• RFC 2236 IGMP v2
• RFC 3376 IGMP v3
• RFC 3973 PIM-DM
• RFC 2362 PIM-SM
• RFC 2858 BGP-MP
• RFC 3618 MSDP
• 802.1Q Virtual Bridged LANs
• 802.1D MAC Bridges
• 802.1w Rapid STP
• 802.1s Multiple Spanning Trees
• 802.1ag Connectivity Fault Management (CFM)
• RFC 3446 Anycast RP
RFC Compliance
General Protocols
• RFC 791 IP
BGPv4
• RFC 4271 BGPv4
• RFC 792 ICMP
• RFC 1745 OSPF Interactions
• RFC 793 TCP
• RFC 1997 Communities & Attributes
• RFC 2439 Route Flap Dampening
• RFC 2796 Route Reflection
• RFC 783 TFTP
• RFC 826 ARP
• RFC 768 UDP
• RFC 1965 BGP4 Confederations
• RFC 2842 Capability Advertisement
• RFC 2918 Route Refresh Capability
• RFC 1269 Managed Objects for BGP
• RFC 2385 BGP Session Protection via TCP MD5
• RFC 894 IP over Ethernet
• RFC 903 RARP
• RFC 906 TFTP Bootstrap
• RFC 1027 Proxy ARP
• RFC 951 BootP
• RFC 3682 Generalized TTL Security
Mechanism, for eBGP Session Protection
• RFC 1122 Host Extensions for IP Multicasting
• RFC 1256 IRDP
• RFC 4273 BGP-4 MIB
• draft-ietf-idr-restart Graceful Restart
Mechanism for BGP
• RFC 1519 CIDR
• RFC 1542 BootP Extensions
• RFC 1812 Requirements for IPv4 Routers
• RFC 1541 and 1542 DHCP
• RFC 2131 BootP/DHCP Helper
• RFC 3768 VRRP
OSPF
• RFC 2328 OSPF v2
• RFC 3101 OSPF NSSA
• RFC 1745 OSPF Interactions
• RFC 1765 OSPF Database Overflow
• RFC 1850 OSPF v2 MIB
• RFC 854 TELNET
• RFC 2370 OSPF Opaque LSA Option
• RFC 3630 TE Extensions to OSPF v2
• RFC 3623 Graceful OSPF Restart
• RFC 1591 DNS (client)
QoS
• RFC 2475 An Architecture for
Differentiated Services
• RFC 3246 An Expedited Forwarding PHB
• RFC 2597 Assured Forwarding PHB Group
• RFC 2698 A Two Rate Three Color Marker
IS-IS
• RFC 1195 Routing in TCP/IP and
Dual Environments
• RFC 1142 OSI IS-IS Intra-domain
Routing Protocol
• RFC 2763 Dynamic Host Name Exchange
• RFC 2966 Domain-wide Prefix Distribution
Download from Www.Somanuals.com. All Manuals Search And Download.
BROCADE NETIRON XMR SERIES SPECIFICATIONS CONTINUED
Other
• RFC 1354 IP Forwarding MIB
• RFC 2665 Ethernet Interface MIB
• RFC 1757 RMON Groups 1,2,3,9
• RFC 2068 HTTP
MPLS
• RFC 3031 MPLS Architecture
• RFC 3032 MPLS Label Stack Encoding
• RFC 3036 LDP Specification
• RFC 2205 RSVP v1 Functional Specification
• RFC 2030 SNTP
• RFC 2209 RSVP v1 Message
Processing Rules
• RFC 2865 RADIUS
• RFC 3176 sFlow
• RFC 3209 RSVP-TE
• RFC 2863 Interfaces Group MIB
• Draft-ietf-tcpm-tcpsecure TCP Security
• RFC 3270 MPLS Support of
Differentiated Services
• RFC 3704 Ingress Filtering for Multihomed
Networks (uRPF)
• RFC 4090 Fast Reroute Extensions to
RSVP-TE for LSP Tunnels; partial support:
detour style
• RFC 2784 Generic Routing
Encapsulation (GRE)
• RFC 3812 MPLS TE MIB
• draft-ietf-bfd-base Bidirectional Forwarding
• draft-ietf-bfd-mpls BFD for MPLS LSPs
Detection (BFD)
(RSVP-TE)
• draft-ietf-bfd-v4v6-1hop BFD for IPv4 and
IPv6 (Single Hop); for OSPFv2, OSPFv3, IS-IS
L3VPN
• RFC 2858 Multiprotocol Extensions
for BGP-4
IPv6 Core
• RFC 2460 IPv6 Specification
• RFC 2461 IPv6 Neighbor Discovery
• RFC 3107 Carrying Label Information
in BGP-4
• RFC 2462 IPv6 Stateless Address
Auto-Configuration
• RFC 4364 BGP/MPLS IP VPNs
• RFC 4443 ICMPv6
• draft-ietf-idr-bgp-ext-communities BGP
Extended Communities Attribute
• RFC 4291 IPv6 Addressing Architecture
• RFC 3587 IPv6 Global Unicast
Address Format
• RFC 4576 Using LSA Options Bit to Prevent
Looping in BGP/MPLS IP VPNs (DN Bit)
• RFC 2375 IPv6 Multicast Address
Assignments
• RFC 4577 OSPF as the PE/CE Protocol
in BGP/MPLS IP VPNs
• RFC 2464 Transmission of IPv6 over
Ethernet Networks
• draft-ietf-idr-route-filter Cooperative
• RFC 2711 IPv6 Router Alert Option
• RFC 3596 DNS support
Route Filtering Capability for BGP-4
• RFC 4382 MPLS/BGP Layer 3 VPN MIB
IPv6 Routing
• RFC 2080 RIPng for IPv6
L2VPN and PWE3
• draft-ietf-l2vpn-l2-framework Framework for
Layer 2 Virtual Private Networks
• RFC 2740 OSPFv3 for IPv6
• draft-ietf-isis-ipv6 Routing IPv6 with IS-IS
• RFC 2545 Use of BGP-MP for IPv6
• draft-ietf-l2vpn-requirements Service
Requirements for Layer 2 Provider
Provisioned Virtual Private Networks
IPv6 Multicast
• RFC 2710 Multicast Listener Discovery
(MLD) for IPv6
• RFC 4762 VPLS Using LDP Signaling
• draft-ietf-pwe3-arch PWE3 Architecture
• RFC 3810 Multicast Listener Discovery
Version 2 for IPv6
• RFC 4604 IGMPv3 & MLDv2 for SSM
• draft-ietf-ssm-arch SSM for IP
• RFC 2362 PIM-SM
• RFC 4447 Pseudowire Setup and
Maintenance using LDP
• RFC 4448 Encapsulation Methods for
Transport of Ethernet over MPLS Networks
• draft-ietf-pim-sm-v2-new; partial support:
SSM mode of operation
• draft-ietf-pwe3-pw-tc-mib Definitions for
Textual Conventions and OBJECT-IDENTITIES
for Pseudo-Wires Management
IPv6 Transitioning
• RFC 2893 Transition Mechanisms for IPv6
Hosts and Routers
• RFC 3056 Connection of IPv6 Domains
• draft-ietf-pwe3-pw-mib Pseudo Wire (PW)
via IPv4 Clouds
Management Information Base
Download from Www.Somanuals.com. All Manuals Search And Download.
Packet Over SONET/SDH
Electromagnetic Emission
• RFC 1661 The Point-to-Point Protocol (PPP)
• RFC 1662 PPP in HDLC-like Framing
• ICES-003 Electromagnetic Emission
• FCC Class A
• RFC 2615 PPP over SONET/SDH
• EN 55022/CISPR-22 Class A/VCCI Class A
• AS/NZS 55022
• RFC 1332 Internet Protocol Control Protocol (IPCP)
• RFC 1377 The PPP OSI Network Layer Control Protocol (OSINLCP)
• RFC 2472 IPv6 over PPP
• EN 61000-3-2 Power Line Harmonics
• EN 61000-3-3 Voltage Fluctuation & Flicker
• EN 61000-6-3 Emission Standard (Supersedes: EN 50081-1)
Immunity
• RFC 3592 SONET/SDH Objects
• GR-253-CORE SONET Transport Systems: Common Generic Criteria
• G.707/Y.1322 Network Node Interface for SDH
• EN 61000-6-1 Generic Immunity and Susceptibility. Supersedes: EN 50082-1
• EN 55024 Immunity Characteristics. Supersedes:
— EN 61000-4-2 ESD
MEF Certification
• MEF 9 Certified—Abstract Test Suite for Ethernet Services at the UNI
• MEF 14 Certified—Abstract Test Suite for Traffic Management Phase 1
— EN 61000-4-3 Radiated, radio frequency, electromagnetic field
— EN 61000-4-4 Electrical fast transient
Network Management
• IronView Network Manager (INM) Web-based graphical user interface
— EN 61000-4-5 Surge
• Integrated industry standard Command Line Interface (CLI)
— EN 61000-4-6 Conducted disturbances induced by radio-frequency fields
• sFlow (RFC 3176)
• Telnet
— EN 61000-4-8 Power frequency magnetic field
— EN 61000-4-11 Voltage dips and sags
TELCO NEBS/ETSI
• SNMP v1, v2c, v3
• SNMP MIB II
• RMON
Designed to meet the following specifications (formal testing under way):
• Telcordia GR-63-CORE NEBS Requirements: Physical Protection
• Telcordia GR-1089-CORE EMC and Electrical Safety
• Telcordia SR-3580 Level 3
Element Security Options
• AAA
• RADIUS
• ETSI ETS 300-019 Physical Protection
• Secure Shell (SSH v2)
- Part 1-1, Class 1.1, Partly Temperature Controlled Storage Locations
- Part 1-2, Class 2.3, Public Transportation
• Secure Copy (SCP v2)
• HTTPs
- Part 1-3, Class 3.1, Temperature Controlled Locations (Operational)
• ETSI ETS 300-386 EMI/EMC
• TACACS/TACACS+
• Username/Password (Challenge and Response)
• Bi-level Access Mode (Standard and EXEC Level)
• Protection against Denial of Service attacks, such as TCP SYN or Smurf Attacks
Power and Grounding
• ETS 300 132-1 Equipment Requirements for AC Power Equipment Derived
from DC Sources
Environmental
• ETS 300 132-2 Equipment Requirements for DC Powered Equipment
• ETS 300 253 Facility Requirements
• Operating Temperature: 0° C to 40° C (32° F to 104° F)
• Relative Humidity: 5% to 90%, @40° C (104° F), non-condensing
• Operating Altitude: 6,600 ft (2,012 m)
Physical Design and Mounting
• Storage Temperature: -25º C to 70º C (-13º F to 158° F)
• Storage Humidity: 95% maximum relative humidity, non-condensing
• Storage Altitude: 15,000 ft (4,500 m) maximum
19-inch rack mount
supporting racks
compliant with:
• ANSI/EIA-310-D
• ETS 300 119
• GR-63-CORE Seismic Zone 4
Safety Agency Approvals
• CAN/CSA-C22.2 No. 60950-1-3
• UL 60950-1
Tabletop
Environmental Regulatory Compliance
• EU 2002/95/EC RoHS (with lead exemption)
• IEC 60950-1
• EU 2002/96/EC WEEE
• EN 60950-1 Safety of Information Technology Equipment
• EN 60825-1 Safety of Laser Products—Part 1: Equipment Classification,
Requirements and User’s Guide
• EN 60825-2 Safety of Laser Product—Part 2: Safety of Optical Fibre
Communication Systems
Download from Www.Somanuals.com. All Manuals Search And Download.
DATA SHEET
ORDERING INFORMATION
Part Number
NI-XMR-4-AC
NI-XMR-8-AC
NI-XMR-16-AC
NI-XMR-32-AC
NI-XMR-4-DC
Description
4-slot NetIron XMR 4000 AC system
8-slot NetIron XMR 8000 AC system
16-slot NetIron XMR 16000 AC system
32-slot NetIron XMR 32000 AC system
4-slot NetIron XMR 4000 DC system
NI-XMR-8-DC
NI-XMR-16-DC
NI-XMR-32-DC
NI-XMR-MR
8-slot NetIron XMR 8000 DC system
16-slot NetIron XMR 16000 DC system
32-slot NetIron XMR 32000 DC system
NetIron XMR Series system management module, 2 GB SDRAM,
dual PCMCIA slots, EIA/TIA-232 and 10/100/1000 Ethernet ports
for out-of-band management
NI-XMR-32-MR
NetIron XMR 32000 system management module, 2 GB SDRAM,
dual PCMCIA slots, EIA/TIA-232 and 10/100/1000 Ethernet ports
for out-of-band management
NI-X-SF1
NetIron XMR 4-slot system switch fabric module
NetIron XMR 8-/16-slot system switch fabric module
NetIron XMR 32-slot system switch fabric module
NI-X-SF3
NI-X-32-SF
BR-MLX-10Gx4-X
NetIron XMR/Brocade MLXe 4-port 10 GbE (X) module with IPv4/IPv6/
MPLS hardware support—requires XFP optics. Supports 1M IPv4 routes
in FIB.
NI-XMR-10Gx4
NetIron XMR Series 4-port 10-GbE module with IPv4/IPv6/MPLS
hardware support — requires XFP optics
NI-XMR-10Gx2
NetIron XMR Series 2-port 10-GbE module with IPv4/IPv6/MPLS
hardware support — requires XFP optics
BR-MLX-1GFx24-X
BR-MLX-1GCx24-X
NI-XMR-1Gx20-SFP
NI-XMR-1Gx20-GC
NetIron XMR/Brocade MLXe 24-port 1 GBE (X) SFP module with IPv4/
IPv6/MPLS hardware support. Supports 1M IPv4 routes in FIB.
NetIron XMR/Brocade MLXe 24-port 1 GBE (X) RJ-45 copper module with
IPv4/IPv6/MPLS hardware support. Supports 1M IPv4 routes in FIB.
NetIron XMR Series 20-port FE/GE (100/1000) module with
IPv4/IPv6/MPLS hardware support — requires SFP optics
NetIron XMR Series 20-port 10/100/1000 copper module with
IPv4/IPv6/MPLS hardware support
NI-X-OC192x2
NI-X-OC192x1
NI-X-OC48x8
NI-X-OC48x4
NI-X-OC48x2
2-port Packet over SONET (SDH) OC-192 (STM-64) interface module
1-port Packet over SONET (SDH) OC-192 (STM-64) interface module
8-port Packet over SONET (SDH) OC-12/48 (STM-4/16) interface module
4-port Packet over SONET (SDH) OC-12/48 (STM-4/16) interface module
2-port Packet over SONET (SDH) OC-12/48 (STM-4/16) interface module
Corporate Headquarters
San Jose, CA USA
European Headquarters
Geneva, Switzerland
Asia Pacific Headquarters
Singapore
T: +1-408-333-8000
T: +41-22-799-56-40
T: +65-6538-4700
© 2011 Brocade Communications Systems, Inc. All Rights Reserved. 03/11 GA-DS-1271-02
Brocade, the B-wing symbol, BigIron, DCFM, DCX, Fabric OS, FastIron, IronView, NetIron, SAN Health, ServerIron,
TurboIron, and Wingspan are registered trademarks, and Brocade Assurance, Brocade NET Health, Brocade One,
Extraordinary Networks, MyBrocade, VCS, and VDX are trademarks of Brocade Communications Systems, Inc., in the
United States and/or in other countries. Other brands, products, or service names mentioned are or may be trademarks
or service marks of their respective owners.
Notice: This document is for informational purposes only and does not set forth any warranty, expressed or implied,
concerning any equipment, equipment feature, or service offered or to be offered by Brocade. Brocade reserves the
right to make changes to this document at any time, without notice, and assumes no responsibility for its use. This
informational document describes features that may not be currently available. Contact a Brocade sales office for
information on feature and product availability. Export of technical data contained in this document may require an
export license from the United States government.
Download from Www.Somanuals.com. All Manuals Search And Download.
|