RPKUTI1
Rack Mount &
Security Cover for UTI1
Description
The RPKUTI1 Rack Mount and Security Cover provides protection against tampering of the UTI1
settings and connections and offers the option of rack mounting the UTI1. Knockout sections on
both the cover and the rack ears are provided to facilitate wire entry and exit.
Package Contents
•
•
•
•
Security Cover
Rack Ears (2)
Security Cover Screws (2)
Rack Ear Screws (2)
Installation
Rack Ears
Knockouts are located on the sides of the rack
ears for wire access. Remove these knockouts as
needed prior to attaching the rack ears to the
UTI1.
1. Attach each rack ear to the UTI1 using the
screws already installed in the UTI1.
2. Install one of the provided rack ear screws in
the remaining mounting hole of each
RPKUTI1 rack ear.
Security Cover
Knockouts are located underneath and on both
sides of the security cover for wire access.
Remove these knockouts as needed prior to
attaching the security cover to the UTI1.
1. Hook the security cover to the UTI1.
2. Screw the security cover to the UTI1 using
the two security cover screws provided.
© 2004 Bogen Communications, Inc.
54-2119-01A
Specifications subject to change without notice.
0408
Download from Www.Somanuals.com. All Manuals Search And Download.
|