Radio / Cassette
Bologna
RCR 126
Operating instructions
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Short instructions ........................ 19 Radio operation with RDS ........... 25 Tape operation.............................. 30
AF - Alternative frequency .................... 25 Inserting a tape ..................................... 30
Important notes ............................ 22
Removing a tape ................................... 30
REG - regional programme ................... 25
Precautions ........................................... 22
Traffic safety ......................................... 22
Installation/Connection.......................... 23
Selecting a waveband ........................... 26 Fast Forward/Rewind ............................ 30
Automatic tuning ................................ 26 PROG selector ...................................... 30
Manual tuning .................................... 26
DSC programming........................ 31
Scrolling through the broadcasting
Anti-theft protection ..................... 23
Overview of the DSC factory settings ... 32
network (only FM) ................................. 26
Changing the memory bank (FM) ......... 26
Storing stations ..................................... 27
Automatically storing the strongest
stations with Travelstore ....................... 27
Recalling stored stations ....................... 27
Scanning stored stations
Release panel ....................................... 23
Detaching the release panel .............. 23
Fitting the release panel .................... 23
Security code ........................................ 23
Entry of a wrong code number .............. 23
Switching on security coding................. 24
Re-start following an interruption of the
power supply ......................................... 24
Switching off security coding................. 24
Optical indication for extra security ....... 24
Appendix ....................................... 32
Care notes ............................................ 32
Release panel .................................... 32
Mechanism/cassette tapes ................ 32
Specifications ........................................ 32
with Preset Scan ................................... 27
Scanning stations with Radio-Scan ...... 28
Selecting the seek tuning sensitivity ..... 28
Switching from stereo to mono (FM) ..... 28
Receiving traffic programme
stations with RDS-EON ................ 29
Traffic announcement priority on/off ..... 29
Warning beep........................................ 29
Switching the warning beep off .......... 29
Automatic seek tuning start................... 29
Adjusting the volume for traffic
announcements and the warning beep . 29
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Short instructions
1 On
Volume
Off
2 LD
Loudness - When listening at a low
GEO –
To adjust the balance (left/right) and
fader (front/rear) with the rocker switch.
level, the Loudness function creates a
more natural sound by boosting the low
frequency range.
To switch the Loudness on/off:
Press LD.
For more information, read chapter
“DSC programming”.
This unit can also be switched on and
off with the Release Panel B.
Also, when being connected correctly,
you may turn the radio on and off via
the ignition of your car.
Fader front
Fader rear
Balance left
Balance right
3 AUD/GEO
AUD –
Use one of the following possibilities to
continue operating the set when the
ignition is switched off:
a) Switch on/off with knob 1.
b) Remove/re-install the release panel.
c) Press AUD 3.
When turning on the unit with the re-
lease panel or by pressing the AUD
button, the system will start to play with
the volume adjusted last.
When operating the unit with the igniti-
on being switched off, the system will
automatically shut down after one hour
in order to avoid that the battery goes
flat.
To adjust the treble and bass frequen-
cies with the rocker switch.
To alter a setting,
•
press AUD or GEO and then chan-
ge the value with the rocker switch.
The adjusted value is indicated in the
display.
The last setting will be stored automati-
cally.
To finish the setting: Press AUD or
GEO.
If the setting remains unchanged within
8 seconds, the display will switch back
to the previous condition.
Treble +
Treble –
Bass –
Bass +
19
Download from Www.Somanuals.com. All Manuals Search And Download.
4 DSC (Direct Software Control)
Use the DSC function to customise
certain programmable, basic settings to
suit your personal needs and prefe-
rences. See chapter “DSC pro-
7 lo/dx
To alter the automatic seek tuning sen-
: Display
Radio operation:
sitivity.
If “lo” is displayed, the radio will only
pick up strong, local stations (low sensi-
tivity).
gramming” for more information.
NDR1 NDS - Station abbreviation or
frequency
If “lo” does not light up, the radio will
also pick up weaker, distant stations
(high sensitivity).
To switch over: Press lo or dx briefly.
For more information, see chapter
“DSC programming”.
5 AF - Alternative frequency during RDS
operation
FM
T
5
- Waveband
- Memory bank (I, II, T)
- Preset button (1 - 6)
- Stereo
When “AF” lights up in the display, the
radio will automatically search for a
frequency offering better reception of
the same RDS programme.
lo
- Seek tuning sensitivity
- Alternative RDS frequency
- Traffic programme identifier
- Priority for traffic programme
stations
AF
TP
TA
To switch AF on/off: Press AF briefly.
8 Cassette removal
Press
.
6 REG
LD
- Loudness
REG ON / REG OFF
9 Cassette loading slot
Insert tape (side A or 1 up; the open
side facing to the right).
With REG ON the system will only
switch to a better alternative frequency
if the latter belongs to a linked station
offering the same regional programme
(see “REG - regional programme).
To switch REG on or off: Press REG
until “REG ON” or “REG OFF” appears
in the display (BEEP tone).
Tape operation:
TR1--PLAY - Side 1 (or 2)
20
Download from Www.Somanuals.com. All Manuals Search And Download.
; PROG button/Fast winding
> 1, 2, 3, 4, 5, 6 - preset buttons
You can store six stations on each FM
memory bank (I, II, T).
@ M•L
To select the MW or LW waveband.
To switch to the other side of the
cassette tape:
Press both buttons simultaneously.
The display shows TR1-PLAY or TR2-PLAY.
Press button as many times until the
desired band is adjusted.
To store a station: Press button during
radio operation and hold down until the
radio resumes play.
To recall a station: Select the wave-
band and on FM also the desired me-
mory bank (press FMT button as many
times as required). Then press the cor-
responding preset button briefly.
A FMT - FM, Travelstore
To switch between the FM memory
banks I, II and “T” (Travelstore).
To switch over:
Press FMT as many times until the
desired bank is indicated in the display.
To store the six most powerful stations
automatically with Travelstore:
Store: Press FMT; seek tuning starts.
Recall: Press FMT as many times until
the display shows “T”. Then briefly
press one of the preset buttons 1, 2, 3,
4, 5, or 6.
Fast winding
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
Extra function:
Coding: Read chapter “Anti-theft pro-
tection” first.
Buttons 1, 2, 3, 4 - To enter the four-
digit code.
Press each of the buttons as many
times as required until the code number
given in the car radio passport stands
in the display.
< SC
Radio operation
Scan (sampling all stations to be recei-
ved): Press SC briefly.
= PS
Preset Scan (sampling all stations
stored on the preset buttons): Press PS
briefly.
? TA (priority for traffic announcements)
If “TA” is displayed, the system will play
traffic stations only.
TA on/off: Press button.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Important notes
Precautions
B RELEASE / CODE-LED
Release panel - detachable face.
For extra anti-theft protection, you
should take the detachable face with
you when leaving your car.
To remove it:
C Rocker switch
Seek tuning
Before starting to use your new car radio,
please read the information on “Traffic safe-
ty” and “Anti-theft protection” carefully.
Traffic safety
Press RELEASE.
To re-install the panel: Insert on the left
side first with the cassette slot facing up
and then press on the right until the
panel locks in.
As the driver of a motor vehicle, it is your
responsibility to pay attention to the traffic
situationatalltimes.Neveruseyourcarradio
in a way that could distract you.
Please keep in mind that you travel a di-
stance of 14 m per second at a speed of only
50 km/h.
Should the traffic situation become particu-
larlydemanding,weadviseyounottousethe
radio.
Always make sure that you are still able to
hear any warning signals coming from outsi-
deofthevehicle, suchaspoliceorfireengine
sirens, so that you can react accordingly.
Therefore, youshouldalwaysselectamode-
rate volume for playing your car radio while
you are driving.
Up
Down
/
/
Up/down in short intervals
(“AF” must be switched off)
To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
Code LED
May flash for additional theft protection
when the car radio is switched off, pro-
vided this feature has been adjusted
correspondingly via DSC (see DSC
CODE-LED).
Extra functions:
In the DSC mode:
Select and programme
DSC functions.
Enter code and confirm
Coding:
with
.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Anti-theft protection
Release panel
Installation/Connection
Fitting the release panel
•
Insert the panel on the left side first with
the cassette slot facing up and then
This unit is equipped with a release panel
(detachable face).
You can remove the control face at the push
of a button.
For extra anti-theft protection, we recom-
mend you to take the detachable face with
you when leaving your car.
Re-inserting the release panel is child’s play.
Thesetwillbereadyforuseimmediately;you
will find all the previous settings re-adjusted.
If you would like to install this equipment
yourself or add any new components, please
read the enclosed installation and connec-
tion instructions carefully.
Do not connect the loudspeaker outputs to
ground!
•
press on the right until it locks in.
Theunitisnowreadyforusewiththesettings
adjusted before removing the panel.
Use only the accessory and replacement
parts approved by Blaupunkt.
Security code
This car radio is supplied with inactive code
protection. In order to switch the security
coding system on, proceed as described in
the following.
If the coding system is active while the power
supply to the system is interrupted (e.g. theft,
disconnection of the car battery), the set will
be electronically blocked. In such a case it
canonlybemadeoperableagainbyentering
the correct code number given in the car
radio passport.
Detaching the release panel
•
Press RELEASE.
The unit will be switched off automatically.
The control panel will be released in order for
you to detach it.
Store it in a safe place, excluding possible
damages.
Entry of a wrong code number
It should not be possible for a thief to find out
the correct code number by trial and error.
Thisiswhythesetwillbeblockedforacertain
periodoftimeafterawrongcodenumberhas
been entered. The display will then show
“CODE ERR”.
After the first three unsuccessful attempts,
the system will lock for 8 seconds; after
23
Download from Www.Somanuals.com. All Manuals Search And Download.
further attempts, the waiting time extends to Now the security coding system is active.
If the display shows “CODE ERR”, you have
one hour. The display will briefly show “CODE” each entered a wrong code. Re-enter the correct
After 20 unsuccessful attempts, the display time the set is turned on.
willshow“SERVICE”. Inthiscaseyoucanno
longer re-start the unit.
code after the waiting time (“CODE” will ap-
pear in the display).
If you switch off the set while it is blocked, the
waiting time will start anew as soon as the
radio is turned on again.
Re-start following an interrup-
tion of the power supply
Notice:
(coding system is activated)
Keep your car radio passport with the code
number in a safe place in order to avoid
“unauthorised access” to your car radio.
When the security code system is activated,
the unique code must be entered each time
the power to the unit was interrupted.
The radio will function again as soon as you
have entered the correct code.
If you have lost your radio passport and
forgotten the code number, your radio can
only be made operable again by one of our
authorised service workshops (subject to
payment).
•
•
•
Turn on the radio.
The display shows “CODE”.
Switching off security coding
•
•
Turn off the radio.
Briefly press preset button 1; the dis-
play shows “0000”.
Press preset buttons 1 and 4 simulta-
neously and hold down while switching
the set on again.
Enter the code number given in the
Blaupunkt car radio passport:
The display shows “CODE”.
Example: The code number is 2521.
- Press preset button 1 twice; the dis-
play shows “2000”.
- Press preset button 2 five times; the
display shows “2500”.
- Press preset button 3 twice; the dis-
play shows “2520”.
- Press preset button 4 once; the dis-
play shows “2521”.
•
Now enter the code number to be found
in the car radio passport and confirm
(see example under “Re-start ...”).
Security coding is now switched off.
Optical indication for extra
security
Switching on security coding
To activate the coding system:
To indicate that your unit is equipped with
security coding, you may let an LED installed
in the non-detachable part of the front panel
flash for extra security when the car is statio-
nary.
•
To confirm the code number:
Press the upper part of the rocker
•
•
Turn off the radio.
Press preset buttons 1 and 4 simulta-
neously and hold down while switching
the set on again.
switch
.
If you have entered the correct code, the unit
will now be ready for use.
The display briefly shows “CODE” and the
unit will switch on.
For this, the following requirements must be
fulfilled:
•
Release preset buttons 1 and 4.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Radio operation with RDS (Radio Data System)
Permanent 12 V supply and the + ignition The Radio Data System offers you more switching on the radio or recalling one of the
lead must be connected correctly (as illustra- convenience when listening to FM radio sta- stored frequencies, the unit is automatically
tions.
„LED 1“ must be adjusted in the DSC mode. More and more radio stations have begun to “SEARCH” will disappear from the display
broadcast RDS information alongside their when the alternative frequency has been
searching for an alternative frequency.
ted in the installations instructions).
Read “DSC programming - CODE-LED”.
programmes.
Assoonasaprogrammehasbeenidentified,
found or after the frequency band has been
run through completely.
the station name including a regional identi- If the reception quality of the selected pro-
fier, if applicable, will appear in the display, gramme becomes too bad:
for example, NDR1 NDS (regional program-
me in Lower Saxony, Germany).
•
Tune into another station.
When RDS is activated, the station buttons
become programme buttons. You now know
exactly which programme you have tuned
into, making it easy to find the desired station
quickly.
REG - regional programme
Certain radio programmes are split up at
times into regional programmes offering lo-
cal information. The 1st programme broad-
cast by NDR, for example, offers program-
mes with different contents in the northern
statesofGermanySchleswig-Holstein,Ham-
burg and Lower Saxony at certain times of
the day. If you are listening to one program-
me and move to an area where another
linked regional programme becomes stron-
ger, the unit will switch to that programme.
If you wish to continue listening to the first
programme,
But RDS offers you further advantages:
AF - Alternative frequency
The AF (Alternative Frequency) function
makes sure that the strongest frequency of
the currently selected programme is always
tuned in automatically.
This function is activated when “AF” appears
in the display.
In order to switch this function on or off,
•
press the REG button.
•
press the AF button briefly.
“REG ON” appears in the display.
While searching for the strongest reception
signal, the radio may switch to mute briefly.
If “SEARCH” appears in the display when
If you leave the service area of the regional
programme tuned into, or if you would like to
25
Download from Www.Somanuals.com. All Manuals Search And Download.
takeadvantageofthefullRDSservice,switch Automatic tuning
to “REG OFF”.
>>, or backwards using the << button, e.g.
NDR 1, 2, 3, 4, N-JOY (North German broad-
caster).
•
Press the REG button briefly.
For this it is necessary that the stations have
beenreceivedatleastonceandthat“AF”has
been activated before (lights up in the dis-
play).
For this purpose, you may start Travelstore
seek operation:
When active, “REG ON” will be briefly dis-
played each time the radio is switched on.
Up
Down
Selecting a waveband
With this car radio you can select between
the following wavebands:
FM 87.5 - 108 MHz
MW 531 - 1602 kHz
LW 153 - 279 kHz
/
/
Up/down in short intervals
(“AF” must be switched off)
To scroll through the broadcasting
network when “AF” is activated
(e.g. NDR1 ... NDR4).
•
Press FMT for 2 seconds; the system
starts to run through the frequency
band.
If “AF” does not light up,
press AF.
•
Select the desired waveband by pres-
•
sing the FMT or M•L button.
Manual tuning << >>
(prerequisite: AF is switched off!)
With this, the requirements for selecting sta-
tions with << >> are fulfilled.
To switch between MW and LW:
Press M•L.
•
Press << >>; the frequency will change
in short intervals in downwards or up-
wards direction.
•
Changing the memory bank (FM)
Automatic tuning
Press / ; the car radio will automati-
cally search for the next station.
Whenkeepingtheupperorlowerpart
/
You can shift between the memory banks I, II
and T in order to store stations and recall
them later.
The currently selected memory bank is indi-
cated in the display.
When holding the right or left part of the
rocker switch pressed down, the frequency
scan is speeded up.
•
/
of
the rocker switch depressed, seek tuning will
speed up in upwards or downwards direc-
tion.
Scrolling through the broad-
casting network (only FM)
•
Press the FMT button as many times
until the desired memory bank lights up
in the display.
You can use the << >> buttons to tune in
stations of your reception area.
If several programmes of one broadcasting
network can be received, you can scroll
through them in forwards direction pressing
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Storing stations
Automatically storing the stron- Scanning stored stations
gest stations with Travelstore with Preset Scan
On FM, you can store six stations on the
preset buttons 1 to 6 for each of the memory You can automatically store the six most Youcanhaveallofthestoredstationsplayed
banks I, II and T.
On MW/LW, you can store six stations each.
powerful FM stations of your current recepti- briefly on all wavebands.
on area sorted according to their signal
strength. This function is particularly conve- Travelstore memory bank or of the two other
nient on longer trips. storage levels.
On FM, you can scan the stations of the
•
Select the waveband with FMT or M•L
and on FM also the desired memory
bank (with FMT).
•
Press the FMT button for more than
2 seconds.
•
•
Select the waveband.
•
•
Tune in a station with the rocker switch
(either automatically or manually).
On FM, choose Travelstore or another
The radio will search for the strongest FM
stations and store them on the memory bank
T (Travelstore). When this process has been
completed, the radio will play the first station.
If desired, stations can also be stored manu-
ally on the Travelstore bank (see “Storing
stations”).
memory bank using the FMT button.
To start Preset Scan:
Press PS.
Press the desired preset button until
the radio resumes play after the muting
(takes approximately 2 seconds, confir-
med by beep).
•
The stations will be played for approximately
8 seconds each.
Now the station has been stored.
Theactivatedpresetbuttonisindicatedinthe
display.
The positions blinking in the display show
you the memory bank and preset position of
the currently scanned station.
Recalling stored stations
To select a station currently being
scanned and switch off Preset Scan:
Notice:
You can recall any stored station at the touch
of a button.
Should you tune in a station which has alrea-
dy been stored before, the corresponding
presetbuttonandthememorybankwillbriefly
flash in the display if you have selected
another memory bank.
•
Press PS briefly.
•
Select the waveband by pressing FMT
or M•L. On FM, also choose the corre-
sponding memory bank by pressing the
FMT button as many times until the
desired bank appears in the display.
•
Press the corresponding preset button
briefly to recall the station.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanning stations with
Radio-Scan
Selecting the seek tuning sensi-
tivity
You can alter the automatic seek tuning
Beginning with the station currently tuned in,
you can scan the waveband. The radio will sensitivity.
play each station for 8 seconds.
If “lo” is displayed, the radio will only pick up
To start the scan:
strong, local stations (low sensitivity).
If “lo” does not light up, the radio will also pick
up weaker, distant stations (high sensitivity).
To switch over,
•
Press SC briefly.
The scanned frequency or the station
name will start flashing in the display.
During the actual scanning process
“SCAN” will be displayed.
•
Press lo or dx.
On top of this, the sensitivity levels can be
adjusted separately for lo and dx (see chap-
ter “DSC programming”).
To select a station currently being scan-
ned and switch off the scan function:
•
Press SC briefly.
If no station is selected, the scan function will
be automatically switched off after the fre-
quency band has been run through comple-
tely. The unit will tune in the station listened
to before starting the scan.
Switching from stereo to mono
(FM)
If reception is poor, you may get better sound
quality by switching to mono:
•
Press the lo button for approximately 2
seconds.
With mono playback, the stereo sign
will disappear from the display.
Each time the radio is switched on, stereo
playback is activated.
The unit will automatically switch to mono if
the received signal is not strong enough for
stereo playback.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Receiving traffic programme stations with RDS-EON
Many FM broadcasters offer traffic messa- Traffic announcement priority
ges for their service area at regular intervals. on/off
Alternatively:
b) Switch off the priority for traffic an-
nouncements:
All traffic programme stations transmit a spe-
If the priority for traffic announcement pro-
cial carrier signal alongside their program-
grammes is activated, “TA” will light up in the
mes, which is decoded by your car radio. If
display.
•
Press TA.
“TA” will disappear from the display.
this signal is identified, “TP” will appear in the
To switch the priority on or off:
display (Traffic Programme).
•
Press the TA button.
Automatic seek tuning start
(tape operation)
In addition to these, there are also stations
which do not actually transmit traffic pro-
grammes themselves, but by using RDS-
EON they offer the possibility to receive the
traffic messages broadcast by another traffic
programme station in the same radio net-
work. If you listen to one of these stations
(e.g. NDR3), “TP” will appear in the display
provided the priority for traffic programme
stationshasbeenactivated, i.e. “TA”mustbe
displayed.
If a traffic announcement is broadcast, the
radio will automatically switch to the linked
trafficprogrammestation(inthiscase,NDR2)
for the duration of the message and return to
the original programme (NDR3) afterwards.
When pressing TA while a message is being
broadcast, this message will be interrupted.
The unit will then switch back to the previous
condition. The priority for other traffic messa-
ges remains active.
When leaving the reception area of the tuned
in traffic programme station while listening to
a tape, the system will automatically start
searching for a new TA programme.
If no such station is found within approxima-
tely 30 seconds, tape operation will be stop-
ped and a warning beep will sound.
To switch the warning beep off, proceed as
described above.
Warning beep
If you leave the reception area of the traffic
programme station currently tuned into, you
will hear a warning beep after approximately
30 seconds.
This alarm tone will also be released when
pressing a preset button which has no traffic
programme allocated to it.
Adjusting the volume for traffic
announcements and the warning
beep
This volume was preset at the factory.
YoucanalterthevalueusingtheDSCfunction
(see “DSC programming, TA”).
Switching the warning beep off
a) Tune into another station offering traffic
information:
•
•
Press the rocker switch or
a preset button which has a traffic
programme station allocated to it.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape operation
Inserting a tape
Fast Forward/Rewind
PROG selector
(To change the tape direction during
cassette playback)
Fast Forward
•
•
Turn on the set.
Insert a tape.
•
Press FF.
•
Press FR and FF simultaneously.
At the end of a tape side, the mecha-
nism changes directions automatically
to play the other side.
At the end of a tape side, the mechanism
changes directions automatically to play the
other side (Autoreverse). The display shows
“TR1-PLAY” for track (side) 1 or A or “TR2-
PLAY” for track 2 or B.
Insert the tape with side A or 1 showing up, the
open side facing to the right.
Stopping Fast Forward operation
Press FR.
•
Fast Rewind
= Press to eject the tape.
Notice:
•
Press FR.
Ifthereistoomuchtensiononthetapeduring
playback, the set may switch over by itself
before having reached the end of the tape
side. In this case check the condition of the
cassette tape. Sometimes it helps to rewind
it completely.
At the beginning of the tape, the me-
chanism will automatically start play-
back.
The tape will be played in the direction used
last.
“TR1-PLAY” in the display means that track
1 or A is being played.
Stopping Fast Rewind operation
•
Press FF.
Removing a tape
To switch to the other side of the
cassette tape:
•
Press
.
The cassette will eject.
Press both buttons simultaneously.
The display shows TR1-PLAY or TR2-PLAY.
Fast winding
FR : Fast rewind; stop by pressing FF.
FF : Fast forward; stop by pressing FR.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
DSC programming
DSC (Direct Software Control) allows you to
customise certain programmable, basic set-
tings to suit your personal needs and prefe-
rences and then store them.
The basic settings for this audio equipment
weremadeatthefactory. Inthefollowingyou
canfindanoverviewofthesesettings,sothat
you can always reset to these if desired.
If you wish to alter any of the programming,
BEEP
Confirmation tone for all
functions which require a
button to be pressed for
more than 2 seconds.
The volume can be adju-
sted from between 0 to 9.
(0 = off)
Each alteration of this va-
lue is confirmed by a beep
tone of the corresponding
volume.
RM
(Radio Monitor)
With RM-ON, the unit will
automatically switch to the
tuner whenever the casset-
te is fast winding.
RM-OFF - The function is
switched off.
LOCAL
(lo)
•
press DSC.
To adjust the seek tuning
sensitivity for local recepti-
on.
The display will show you the adjusted con-
dition.
Usetherockerswitchtoselectandadjustthe
functions described in the following.
LED (code)
You can adjust the LED B
to flash for extra anti-theft
protection.
LOCAL 1 - high sensitivity
LOCAL 3 - low sensitivity
LED 1 - LED always flash-
es when the unit
has been swit-
DIS
(dx)
To adjust the seek tuning
sensitivity for distant recep-
tion.
ched off via the
ignition.
DIS. 1- high sensitivity
DIS. 3- low sensitivity
/
Select function
Adjust value –
Adjust value +
LED 0 - No flashing.
LOUD
Loudness - When listening
at a low level, the Loud-
ness function creates a
more natural sound by
boosting the low frequency
range.
To quit the DSC programming mode and
store the adjustment:
TA VOL
To adjust the traffic an-
nouncement volume from
between 1 to 9. The mes-
sage will then come
through at this volume.
(1 = low)
•
Press DSC.
If the setting remains unchanged within 8
seconds, the system will automatically store
the last adjustment. The display will switch
back to the previous condition.
LOUD 1 - Low boost
LOUD 6 - Max. boost
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Overview of the DSC factory
settings
Care notes
Specifications
Release panel
Amplifier
To ensure that the unit functions properly it is
important that the contacts between the re-
lease panel and the head unit are free from
any foreign particles.
If necessary, clean the contacts using a cot-
ton swab soaked with alcohol.
Output power:
4 x 20 W RMS power
acc. to DIN 45324
(14.4V),
TA VOL
BEEP
LED (Code) : 1
LOUD
RM
LOCAL
: 4
: 3
4 x 30 W max. power
: 4
: OFF
: 1
Tuner
Wavebands
DIS
: 1
Mechanism/cassette tapes
FM
MW
LW
:
:
:
87.5 – 108 MHz
531 – 1602 kHz
153 – 279 kHz
To avoid possible problems, you should not
use cassette tapes longer than 60 or 90
minutes (C60/C90). Store your tapes in a
cool place away from dirt, dust and tempera-
turesexceeding50° Celsius. Allowverycold
tapes to warm up before playing them in
order to avoid uneven tape transport. After
approximately 100 hours of use, dust partic-
les collected on the playback head or roller
may lead to tape run problems and sound
distortions.
Use a head cleaning tape to remove normal
dirt build-up. For tougher cases, use a cotton
swab (Q-Tip) soaked with alcohol. Do not
attempt to clean by inserting a hard object
into the player!
FM sensitivity:
1.0 µV at 26 dB
signal-to-noise ratio
FM frequency
response:
35 - 16 000 Hz
35 - 16 000 Hz
Tape player
Frequency
response:
Subject to modifications!
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Blaupunkt-Werke GmbH
Bosch Gruppe
5/96
K7/VKD 8 622 400 771
Download from Www.Somanuals.com. All Manuals Search And Download.
|