Blaupunkt Car Stereo System 7 644 820 310 User Manual

Radio / CD / MP3

Bremen MP74

7 644 820 310

Operating instructions

http://www.blaupunkt.com

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTROLS

MENU button to open the basic

settings menu (short press)

Activate/deactivate demo mode

(long press)

Button, to switch the device on/

off,

and mute the device’s volume

Volume control

AUDIO button to adjust the

bass, treble, balance, fader and

X-BASS (short press)

Access the DSA Max Equalizer

(Long press)

button, to unlatch the detach-

able control panel

NEXT button to display the next

pages of a menu,

and switch memory banks in ra-

dio mode

;

Display

SOURCE button to start CD /

CD-changer playback, start play-

ing the Compact Drive MP3

(only if connected)

Softkeys, the function of the

softkeys depends on what is cur-

rently being displayed

DIS•ESC button to change the

display content and close menus

To play an external audio source

(only if connected)

button to open the detachable

control panel (flip-release panel)

TUNER button to select radio

mode directly

Joystick and OK button

To access the radio functions

menu (only possible in radio

mode)

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Tuning into a station....................... 75

Setting the sensitivity of station

seek tuning.................................... 76

Scanning receivable stations

(SCAN) ......................................... 76

Setting the scanning time .............. 76

Storing stations ............................. 77

Storing stations automatically

(Travelstore) .................................. 77

Listening to stored stations ............ 77

Programme type (PTY) .................. 77

Optimising radio reception............. 79

Activating/deactivating the radio

Notes and accessories .......... 61

Road safety ................................... 61

Safety notice ................................. 61

Installation ..................................... 61

Accessories .................................. 61

Activating /

deactivating demo mode................ 62

Theft protection ..................... 62

Detachable control panel ............... 62

Detaching the control panel ........... 62

Attaching the control panel ............ 63

Switching on/off .................... 63

text display .................................... 79

Adjusting the volume ............. 64

Setting the power-on volume ......... 64

Volume mute ................................. 64

Telephone audio ............................ 64

Navigation audio ............................ 65

TIM -

Traffic Information Memory.... 80

Switching TIM on/off ..................... 80

Listening to stored traffic messages 81

Recording traffic information

messages...................................... 81

Setting the timers .......................... 82

Selecting a timer ........................... 82

Sound and volume

distribution settings ............... 67

Adjusting the bass ......................... 67

Adjusting the treble ....................... 67

Adjusting the right/left volume

distribution (balance) ..................... 67

Adjusting the front/back volume

distribution (fader) ......................... 67

Traffic information.................. 83

CD mode ................................ 84

Switching to CD mode and

inserting a CD ............................... 84

Ejecting a CD ................................ 84

Selecting tracks ............................ 84

Fast searching (audible) ................ 84

Random track play (MIX) ............... 85

Repeating tracks (REPEAT) ........... 85

Scanning tracks (SCAN) ............... 85

Displaying CD text......................... 85

Setting scrolling text ...................... 86

Traffic announcements in CD mode. 86

X-BASS .................................. 68

Adjusting the display settings 68

Radio mode............................ 71

Adjusting the tuner settings ........... 71

Setting the number of antennas ..... 72

Switching to radio mode ................ 72

Selecting static/dynamic radio

mode (only FM) ............................. 72

Convenient RDS functions

(AF, REG) ..................................... 74

Selecting the waveband /

memory bank................................. 74

Download from Www.Somanuals.com. All Manuals Search And Download.

CONTENTS

Setting the stage effect.................. 99

Selecting the sound effect ........... 100

MP3 mode .............................. 86

Preparing an MP3-CD ................... 86

Switching to MP3 mode ................ 87

Selecting a directory...................... 88

Selecting tracks ............................ 88

Fast searching (audible) ................ 89

Scanning tracks (SCAN) ............... 89

Random track play (MIX) ............... 89

Repeating individual tracks or

DNC -

Dynamic Noise Covering...... 100

Calibrating DNC.......................... 100

Switching off DNC ...................... 101

Selecting the DNC boost............. 101

Subwoofer and centre

speaker ................................ 102

Adjusting the subwoofer boost

whole directories (REPEAT)........... 89

Configuring the display .................. 90

level ............................................ 102

Adjusting the subwoofer phase.... 102

Setting up the low-pass filter ....... 102

Setting up the subsonic filter ....... 103

Setting up the centre speaker ...... 103

Setting up the high-pass filter for

the front/rear channels................. 104

CD-changer mode (optional) . 91

Switching to CD-changer mode..... 91

Selecting CDs............................... 91

Selecting tracks ............................ 91

Fast searching (audible) ................ 91

Scanning tracks (SCAN) ............... 92

Repeating individual tracks or

whole CDs (REPEAT).................... 92

Random track play (MIX) ............... 92

Naming CDs ................................. 93

TMC for dynamic navigation

systems ................................ 105

Amplifier/sub-out................. 105

CLOCK time ........................... 94

Setting the clock time .................... 94

Displaying the clock time

External audio sources ........ 106

Switching the AUX input on/off .... 106

Naming the AUX input ................. 106

continuously .................................. 95

Entering the power-on

message .............................. 107

DSA Max -

Digital Sound Adjustment ...... 95

Switching DSA on/off .................... 95

Automatically calibrating the

equalizer........................................ 96

Viewing the vehicle acoustics with/

without equalization ....................... 97

Adjusting the graphic equalizer

Displaying the serial number 108

Resetting the device ............ 108

Specifications ...................... 109

manually ........................................ 97

Selecting an equalizer ................... 98

Resetting the equalizer .................. 98

Selecting sound presets ................ 99

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES AND ACCESSORIES

For this reason, listen to your car

sound system at a suitable volume

level during your journey.

Notes and accessories

Thank you for choosing a Blaupunkt

product. We hope you enjoy using this

new piece of equipment.

Safety notice

Please read these operating instruc-

tions before using the equipment for

the first time.

The car sound system and the

device’s control panel (flip-release

panel) heat up during use.

The Blaupunkt editors are constantly

working on making the operating in-

structions clearer and easier to under-

stand. However, if you still have any

questions on how to operate the device,

please contact your dealer or the tele-

phone hotline for your country. You will

find the telephone number printed at the

back of this booklet.

Therefore, when removing the flip-

release panel, only hold it by its non-

metallic surfaces. Allow the car

sound system to cool down first if you

want to uninstall the whole unit.

Installation

If you want to install your car sound sys-

tem yourself, please read the installa-

tion and connection instructions that

follow these operating instructions.

We provide a manufacturer guarantee

for our products bought within the Eu-

ropean Union. You can view the guar-

antee conditions at www.blaupunkt.de Accessories

or ask for them directly at:

Only use accessories approved by Blau-

Blaupunkt GmbH

Hotline

Robert Bosch Str. 200

punkt.

Remote control

The RC 08, RC 10 or RC 10H remote

controls (available as optional accesso-

ries) allow you to access most of the

main functions of your car sound sys-

tem safely and conveniently.

31139 Hildesheim

Germany

Road safety

Road safety has absolute prior-

ity. Only operate your car sound sys-

tem if the road and traffic conditions

allow you to do so. Familiarise your-

self with the device before setting off

on your journey.

You should always be able to hear

police, fire and ambulance sirens in

good time from inside your vehicle.

You cannot switch the device on/off us-

ing the remote control.

Amplifiers

You can use all Blaupunkt and Velocity

amplifiers.

Download from Www.Somanuals.com. All Manuals Search And Download.

NOTES AND ACCESSORIES

THEFT PROTECTION

CD changers

Theft protection

You can obtain the following CD chang-

ers from accessory retailers for connec-

tion to this device: CDCA03, CDCA08

and IDC A 09.

Detachable control panel

Your device is equipped with a detach-

able control panel (flip-release panel) as

a theft protection measure.

Compact Drive MP3

The device is worthless to a thief with-

You can connect the Compact Drive out this control panel. Protect your de-

MP3 instead of a CD-changer in order vice against theft by taking the control

to play MP3 music tracks. If you decide panel with you whenever you leave your

to connect a Compact Drive MP3, you vehicle. Do not leave the control panel

will first need to use a computer to store inside your vehicle - not even in a hid-

the MP3 music tracks on the Micro- ing place. The control panel has been

drive™ hard disk that is inside the Com- designed to be easy to use.

pact Drive MP3. Then, when the Com-

pact Drive MP3 is connected to the car

➮ Never drop the control panel.

sound system, you can play the tracks

Note:

➮ Never expose the control panel to

direct sunlight or other heat sourc-

es.

like normal CD music tracks.

The Compact Drive MP3 is operated in

a similar way to a CD-changer. Most of

the CD-changer functions can also be

used with the Compact Drive MP3.

➮ Store the control panel in the sup-

plied case.

➮ Avoid direct skin contact with the

control panel’s electrical contacts. If

necessary, clean the contacts with

a lint-free cloth and some alcohol.

Activating / deactivating demo

mode

The device is supplied from the factory

with demo mode activated. The various

functions of the device are displayed

graphically as animations in the display

during demo mode. You can also deac-

tivate demo mode.

Detaching the control panel

➮ Press and hold down the MENU

button 9 for longer than four sec-

onds to activate/deactivate demo

mode.

➮ Press the

button 3.

The control panel latch mechanism

opens.

Download from Www.Somanuals.com. All Manuals Search And Download.

THEFT PROTECTION

SWITCHING ON/OFF

➮ First, pull the control panel straight

off the device and then out towards

the left.

Switching on/off

There are various ways of switching the

device on/off.

➮ The device switches off after the

Switching on/off using button

control panel is detached.

➮ All the current settings are saved.

➮ To switch on the device, press but-

ton 1.

➮ Any CD already inserted in the de-

vice remains there.

The device switches on.

Attaching the control panel

➮ To switch off the device, press and

hold down button 1 for longer

than two seconds.

➮ Slide the control panel from left to

right into the device’s guide.

➮ Press the left edge of the control

panel into the device until it clicks

into place.

The device switches off.

Switching on/off using the

vehicle ignition

The device will switch on and off simul-

taneously with the ignition if it is con-

nected correctly to the vehicle’s ignition

and if it was not previously switched off

using button 1.

You can switch the device on even if

the ignition is off.

Note:

➮ Press button 1.

➮ When attaching the control panel,

make sure you do not press the

display.

Note:

To protect the vehicle battery, the de-

vice will switch off automatically after

one hour if the ignition is off.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE VOLUME

Adjusting the volume

You can adjust the volume in steps from

0 (off) to 50 (maximum).

Risk of injury! If the power-on

volume is set to maximum, the vol-

ume level can be very high when the

device is switched on.

➮ To increase the volume, turn the

volume control 2 clockwise.

If the volume was set to maximum

before the device was switched off

and the power-on volume is set to

“LAST VOL”, the volume level can

be very high when the device is

switched on again.

➮ To decrease the volume, turn the

volume control 2 anticlockwise.

Setting the power-on volume

Severe damage to your hearing can

be caused in both cases!

You can set the default volume level at

which the device plays when it is

switched on.

Volume mute

You can instantaneously reduce the

volume (mute).

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “VOLUME” display item.

➮ Briefly press button 1.

“MUTE” appears in the display.

➮ Press the softkey 5 assigned to

the “ON VOL” display item.

Cancelling mute

➮ Set the volume level that you want

using the volume control 2.

➮ Briefly press button 1 again.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

➮ turn the volume control 2.

Telephone audio

The settings are saved.

If your car sound system is connected

to a mobile telephone, the sound sys-

tem's volume will be muted as soon as

you “pick up” the telephone. The tele-

phone call is then outputted over the car

sound system's loudspeakers. This re-

quires that the mobile telephone is con-

nected to the car sound system as de-

scribed in the installation instructions.

Note:

You can also set the power-on volume

to be the same as the volume level that

was active before you switched off the

device. To do so, press the softkey as-

signed to the “LAST VOL” display item

in the volume menu.

If the sound system receives a traffic

announcement during a telephone call,

you will only be able to hear the traffic

announcement after the call is finished

(in so far as the traffic announcement is

still being broadcast).

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE VOLUME

If a telephone call arrives during a traf-

fic announcement, the traffic announce-

ment will stop playing and you will hear

the telephone call instead.

Navigation audio

Instead of connecting a second exter-

nal audio source (“AUX2”, see “Exter-

nal audio sources”) you can connect a

navigation system.

You can set the volume at which you

want telephone calls to be initially heard.

If your car radio is connected to a navi-

gation system and the navigation sys-

tem outputs spoken information, the

navigation voice output will be “mixed

in” with the current audio source and

will be outputted over the car radio’s

loudspeakers.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “VOLUME” display item.

➮ Press the softkey 5 assigned to

the “PHONE” display item in order

to adjust the volume.

This requires that the navigation sys-

tem is connected to the car radio (as

described in the installation instructions)

and activated in the menu.

➮ Set the volume level that you want

using the volume control 2.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

You can find out from your Blaupunkt

dealer which navigation systems can be

used with your car sound system.

The settings are saved.

Activating navigation audio

Note:

You can either connect a second exter-

nal audio source or a navigation sys-

tem to this device. If you do, you must

specify which device is connected to this

connection by selecting it in the menu.

You can also adjust the volume during

the telephone call using the volume con-

trol 2.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “AUX” display item.

The AUX menu is displayed.

➮ If you have a navigation system

connected, repeatedly press the

softkey 5 assigned to the “NAV/

AUX2” display item until the “NAVI-

GATION ON” setting appears.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE VOLUME

Note:

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

➮ You can also adjust the volume

during the voice output using the

volume control 2. This setting

only applies to the current voice

output and is not saved.

The settings are saved.

Setting the minimum navigation

volume

You can set the volume level at which

the navigation voice output is “mixed in”

with the audio source.

Note:

➮ Set the volume on the navigation

system to maximum. If the output

sounds distorted, reduce the vol-

ume slightly on the navigation sys-

tem.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “VOLUME” display item.

➮ Press the softkey 5 assigned to

the “NAVI DIFF” display item in or-

der to adjust the volume.

➮ Set the volume level that you want

using the volume control 2.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

SOUND AND VOLUME DISTRIBUTION SETTINGS

Adjusting the right/left volume

distribution (balance)

Sound and volume

distribution settings

➮ To adjust the balance, press the

AUDIO button :.

Note:

You can adjust the bass and treble indi-

vidually for each audio source.

“AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

Adjusting the bass

the “BALANCE” display item.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Move the joystick 8 up/right or

down/left to adjust the right/left vol-

ume distribution.

➮ Press the softkey 5 assigned to

the “BASS” display item.

When you have finished making your

changes,

➮ Move the joystick 8 up/right to

boost the bass or move it down/left

to reduce the bass.

➮ press the joystick OK 8 or the

AUDIO button :.

When you have finished making your

changes,

Adjusting the front/back volume

distribution (fader)

➮ press the joystick OK 8 or the

AUDIO button :.

➮ To adjust the fader, press the AU-

DIO button :.

Adjusting the treble

“AUDIO MENU” appears in the display.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

the “FADER” display item.

➮ Press the softkey 5 assigned to

➮ Move the joystick 8 up/right or

down/left to adjust the front/back

volume distribution.

the “TREBLE” display item.

➮ Move the joystick 8 up/right to

boost the treble or move it down/

left to reduce the treble.

When you have finished making your

changes,

When you have finished making your

changes,

➮ press the joystick OK 8 or the

AUDIO button :.

➮ press the joystick OK 8 or the

AUDIO button :.

Download from Www.Somanuals.com. All Manuals Search And Download.

X-BASS

The X-BASS feature can be used to

boost the bass at low volume levels. You

can set the X-Bass boost for one of the

following frequencies: 32 Hz, 40 Hz, 50

Hz, 63 Hz or 80 Hz in steps from 0 - 6. If

you select the 0 setting, the X-Bass

function will be deactivated.

ADJUSTING THE

DISPLAY SETTINGS

Adjusting the display

settings

You can adjust the display settings to

suit the installation position in your ve-

hicle and your own preferences.

Adjusting the viewing angle

➮ Press the MENU button 9.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “X-BASS” display item.

the “ANGLE” display item.

➮ Move the joystick 8 left or right to

select the frequency that you want

to boost.

➮ Move the joystick 8 up/right or

down/left to adjust the viewing an-

gle.

➮ Move the joystick 8 up to boost

the X-BASS or move it down to re-

duce the X-BASS.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

When you have finished making your

changes,

The settings are saved.

Adjusting the display brightness

➮ press the joystick OK 8 or the

AUDIO button :.

If your car sound system is connected

as described in the installation instruc-

tions, the display brightness will change

when the headlights are turned on/off.

The display brightness can be adjusted

separately for night and day in steps

ranging from 1-16.

Display brightness

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “BRIGHT” display item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE DISPLAY SETTINGS

DAY and NIGHT are displayed in the

top display line together with the cur-

rently set values.

Setting the display illumination

colour

When setting the display illumination,

you can choose one of four preset col-

ours or mix a colour yourself from the

RGB spectrum (red-green-blue) or se-

lect a colour during a colour scan.

➮ Move the flashing selection marker

behind DAY or NIGHT by pressing

the joystick 8 to the left or right.

➮ Set the value that you want. To do

so, move the joystick 8 down or

up.

Selecting a preset colour

Four different colours are already stored

in the device. “Ocean” (blue), “Amber”,

“Sunset” (red-orange) and “Nature”

(green) are available. Select a colour

that best suits your vehicle interior.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

➮ Press the MENU button 9.

Setting the button illumination

colour

You can choose the colour of the de-

vice’s button illumination.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “COLOR” display item.

There are 16 colours for you to choose

from.

➮ Press the softkey 5 assigned to

the display item of the colour that

you want.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “KEYCOLOR” display item.

The settings are saved.

➮ Move the joystick 8 up/right or

down/left to adjust the colour.

A different colour is selected every

time you move the joystick.

Mixing a colour for the display

illumination

To customise the display illumination to

suit your tastes you can mix a colour

yourself using the three primary colours

red, blue and green.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

➮ Press the MENU button 9.

The settings are saved.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE DISPLAY SETTINGS

➮ Press the softkey 5 assigned to

➮ Press the joystick OK 8 or the

the “COLOR” display item.

MENU button 9 to close the

menu.

➮ Press the softkey 5 assigned to

The settings are saved.

the “USER” display item.

➮ In the following menu you can set

the red, blue and green colour

components yourself. To do so,

press the appropriate softkey 5

repeatedly until the displayed col-

our suits your tastes.

Configuring the spectrum

analyser

The spectrum analyser in your display

provides a symbolic representation of

the sound system’s output level. If the

spectrum analyser is switch on, it will

appear automatically after a short time

if you refrain from pressing a button

whilst an audio source is playing.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

You can also choose to deactivate the

spectrum analyser.

Selecting a display illumination

colour during a colour scan

Switching the spectrum analyser

on/off

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

➮ Press the softkey 5 assigned to

the “COLOR” display item.

➮ Repeatedly press the softkey 5

assigned to the “SPECTRUM” dis-

play item until the “SPECTRUM

OFF” or “SPECTRUM ON” setting

that you want is displayed in the

top display line.

➮ Press the softkey 5 assigned to

the “COL-SCAN” display item.

The device starts changing the display

illumination colour.

➮ If you want to select one of the col-

ours, press the softkey 5 as-

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

signed to the “SAVE” display item.

➮ If you want to switch back to the

previous menu without changing

the colour, press the softkey 5 as-

signed to the “BREAK” display

item.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

ADJUSTING THE

RADIO MODE

DISPLAY SETTINGS

Inverting the appearance of the

display content

You can invert the appearance of the

display content.

Radio mode

This device is equipped with an RDS

radio receiver. Many of the receivable

FM stations broadcast a signal that not

only carries the programme but also

additional information such as the sta-

tion name and programme type (PTY).

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “DISPLAY” display item.

The station name appears in the dis-

play as soon as the tuner receives it.

You can optionally display the pro-

gramme type. For further details, please

read the section entitled “Programme

type (PTY)”.

➮ Press the softkey 5 assigned to

the “INVERT” display item.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

Adjusting the tuner settings

The settings are saved.

To ensure that the tuner works proper-

ly, the device must be configured for the

region in which you are using it. You can

choose between Europe and the USA.

By default, the tuner is set to the region

in which the device was sold. If you ex-

perience problems with radio reception,

please check this setting.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “TUNER” display item.

➮ Press the softkey 5 assigned to

the display item of the region that

you want: “AREA EUR” or “AREA

USA”.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

Setting the number of antennas

Switching to radio mode

This device is equipped with two RDS If you are in CD/MP3 mode or CD-

radio receivers (TwinCeiver).

changer/Compact Drive MP3 mode,

You can connect one or two antennas

to the device. If two antennas are con-

nected (strongly recommended - the

second antenna is included), you can

use directional reception when tuning

into stations in DDA radio mode. Direc-

tional reception considerably improves

reception quality in most cases.

➮ press the TUNER button =.

The main radio menu for tuning into a

station is displayed. You can control the

radio-mode functions in the radio func-

tions menu. You can open the radio

functions menu by pressing the TUN-

ER button =again while in radio mode.

Selecting static/dynamic radio

mode (only FM)

You can choose between two modes

for FM radio:

Note:

To ensure that the tuner works correct-

ly, the main antenna must be connect-

ed to the lower antenna jack.

To set the number of antennas,

Static radio mode

(“PRESETS” and “DDA”)

➮ press the MENU button 9.

In static FM radio mode there are four

memory banks (FM1, FM2, FM3 and

FMT) at your disposal. You can store

six stations in each of these memory

banks. The receiver automatically tunes

into the best receivable frequency for

any station that you access from mem-

ory.

➮ Press the softkey 5 assigned to

the “TUNER” display item.

➮ Press the softkey 5 assigned to

the “ONE ANTE” display item if one

antenna is connected to the de-

vice.

➮ Press the softkey 5 assigned to

the “TWO ANTE” display item if

two antennas are connected to the

device.

PRE mode (static)

➮ If you only have one antenna con-

nected to the device and you con-

figured it in the setup menu (see

“Setting the number of antennas”),

the device uses one tuner to play

the tuned station while at the same

time using the second tuner to

search continuously for the best

available frequency for the tuned

station (if the RDS function is acti-

vated).

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

DDA digital directional antenna mode Selecting the radio mode

(static)

To switch between static and dynamic

modes,

➮ If you have two antennas connect-

ed to the device and configured

them in the setup menu (see “Set-

ting the number of antennas”), the

tuned station will be received in

DDA radio mode using both anten-

nas. The TwinCeiver continuously

analyses the signals from both an-

tennas and uses them to calculate

a “clean signal” in order to reduce

reception interference. This proc-

ess developed by Blaupunkt has a

similar effect to using a directional

antenna. Reception quality is im-

proved considerably, particularly in

areas suffering from reception in-

terference due to reflections off

buildings and hills, etc. In excep-

tional cases, for instance if two dif-

ferent stations are received on the

same frequency, an undesirable

effect will be the result. If this is the

case, you should select dynamic

radio mode (see “Selecting the ra-

dio mode” below).

➮ press the TUNER button = in ra-

dio mode.

The radio functions menu appears in the

display.

➮ Press the NEXT button 4.

The second page of the radio functions

menu is displayed.

➮ Press the softkey 5 assigned to

the “TUNER 2” display item.

➮ Press the softkey 5 assigned to

the “DYN LIST” display item for dy-

namic radio mode.

➮ Press the softkey 5 assigned to

the “DDA” or “PRESETS” display

item for one of the static radio

modes.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

Dynamic radio mode

There are five memory banks (DL1 -

DL5) at your disposal in dynamic radio

mode.

Whilst the station that is tuned in is be-

ing played, the second receiver search-

es in the background for receivable sta-

tions and displays the abbreviated

names of all receivable stations along-

side the softkeys in the memory bank.

The stations are continuously updated

ensuring that you always have access

to all receivable stations.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

Switching REG on/off

Convenient RDS functions (AF,

REG)

To use the REG RDS-function,

The convenient RDS functions AF (Al-

ternative Frequency) and REG (Region-

al) extend your radio’s range of func-

tions (only in FM radio mode).

➮ press the TUNER button = while

in radio mode.

➮ Press the NEXT button 4 to dis-

play the second page of the radio

functions menu.

➮ AF: If you activate this RDS func-

tion, the radio automatically tunes

into the best receivable frequency

for the station that is currently set.

The radio functions menu appears in the

display.

➮ Repeatedly press the softkey 5

assigned to the “REGIONAL” dis-

play item until “REGIONAL ON” or

“REGIONAL OFF” is displayed.

➮ REG: At certain times, some radio

stations divide their programme

into regional programmes providing

different content. You can use the

REG function to prevent the car ra-

dio from switching to alternative

frequencies that are providing dif-

ferent regional programme content.

➮ Press the TUNER button = or the

joystick OK 8.

The settings are saved.

Selecting the waveband /

memory bank

Note:

REG must be activated/deactivated

separately in the radio functions menu.

You can use this device to receive pro-

grammes broadcast over the FM and

MW, LW and SW (AM) wavebands.

There are four memory banks availa-

ble for the FM range and one for each

of the MW, LW and SW wavebands.

Switching the RDS function on/off

To use the RDS functions (AF and

REG),

➮ press the TUNER button = while

You have up to five memory banks at

your disposal in dynamic radio mode.

in radio mode.

The radio functions menu appears in the

display.

Six stations can be stored in each mem-

ory bank.

➮ Repeatedly press the softkey 5

assigned to the “RDS” display item

until the “RDS ON” or “RDS OFF”

setting that you want is displayed.

Note:

If your device is configured for the USA

region, you can choose between the FM

and AM wavebands.

To return to the main radio menu,

There are three additional memory

banks available for the AM waveband:

AM1, AM2 and AMT.

➮ press the TUNER button = or the

joystick OK 8.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

Note:

Selecting the waveband

If your device is configured for the USA

region and you selected the AM wave-

band, you can additionally switch be-

tween the AM memory banks (AM1,

AM2 and AMT) by pressing the NEXT

To select a waveband (FM, MW, LW or

SW),

➮ press the TUNER button = while

in radio mode.

The radio functions menu appears in the 4 button.

display.

Tuning into a station

There are various ways of tuning into a

station.

➮ Press the softkey 5 assigned to

the “BAND” display item.

➮ Press the softkey 5 assigned to

the “FM” display item for the FM

waveband.

Automatic station seek tuning

➮ Move the joystick 8 down or up.

➮ Press the softkey 5 assigned to

the “MW” display item for the MW

waveband.

The radio tunes into the next receiva-

ble station.

Tuning into stations manually

➮ Press the softkey 5 assigned to

the “LW” display item for the LW

waveband.

You can also tune into stations manual-

ly.

Note:

➮ Press the softkey 5 assigned to

the “SW” display item for the SW

waveband.

You can only tune into stations manual-

ly if the RDS function is deactivated.

➮ Move the joystick 8 left or right.

The main radio menu for the selected

waveband is displayed.

Browsing through broadcasting

networks (only FM)

Selecting an FM memory bank

If a radio station provides several pro-

grammes, you have the option of brows-

ing through its so-called “broadcasting

network”.

To switch between the FM memory

banks FM1, FM2, FM3 and FMT,

➮ press the NEXT button 4 repeat-

edly until the memory bank that

you want is displayed.

Note:

The RDS function must be activated

before you can use this feature. When

using this feature, you will only be able

to switch to stations that you have re-

ceived once before already.

The memory banks are accessed in the

following order: FM1, FM2, FM3 and

FMT.

➮ Move the joystick 8 left or right.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

Scanning receivable stations

(SCAN)

Setting the sensitivity of station

seek tuning

You can use the scan function to briefly

play all the receivable stations.

You can set the scanning time to be-

tween 5 and 30 seconds in the menu.

You can choose whether the radio

should only tune into stations providing

good reception or whether it can also

tune into those with a weak reception.

➮ Press the TUNER button = while

Starting SCAN

in radio mode.

➮ Press and hold down the joystick

OK 8 for longer than two sec-

onds.

The radio functions menu appears in the

display.

➮ Press the NEXT button 4.

Scanning begins. “SCAN” appears

briefly in the display followed by the

current station name or frequency of the

station.

Note:

If you open the radio functions menu

while in MW or LW radio mode, the

softkey assigned to the “SENS” display

item will appear on the first page.

Cancelling SCAN and continuing

listening to a station

➮ Press the softkey 5 assigned to

➮ Press the joystick OK 8.

Scanning stops and the radio continues

playing the station that it tuned into last.

the “SENS” display item.

➮ Press the softkey 5 assigned to

the “FM” or “AM” display item to

adjust the sensitivity for “FM” or

“AM”.

Setting the scanning time

➮ Press the MENU button 9.

➮ Move the joystick 8 up/right or

➮ Press the softkey 5 assigned to

down/left to adjust the sensitivity.

the “VARIOUS” display item.

You can adjust the sensitivity in steps

from 1 to 6. “SENSITIVITY 1” is the low-

est setting and “SENSITIVITY 6” is the

highest sensitivity setting for distant sta-

tions.

➮ Press the softkey 5 assigned to

the “SCANTIME” display item.

➮ Move the joystick 8 up/right or

down/left to adjust the scanning

time.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

Note:

Starting the Travelstore function

➮ The scanning time that you set is

also applied by the system to scan-

ning carried out in CD/MP3 mode

and CD-changer mode.

➮ Press the TUNER button = while

in radio mode.

The radio functions menu appears in the

display.

Storing stations

➮ Press the softkey 5 assigned to

the “T-STORE” display item.

Storing stations manually

The storing procedure begins. “TRAV-

EL STORE” appears in the display.

After the process is completed, the ra-

dio will play the station that is stored in

location 1 of the FMT (orAMT) memory

bank.

➮ Select the FM memory bank that

you want (FM1, FM2, FM3, FMT)

or one of the MW, LW or SW wave-

bands.

➮ Tune into the station that you want

as described in the section entitled

“Tuning into a station”.

Listening to stored stations

➮ Select the memory bank or wave-

➮ Press one of the six softkeys for

longer than two seconds to assign

the station to that softkey.

band.

➮ Press the softkey 5 that is as-

signed to the station name or fre-

quency of the station that you want

to listen to.

Storing stations automatically

(Travelstore)

You can automatically store the six sta-

tions providing the best reception in the

region (only FM). The stations are stored

in the FMT memory bank.

Programme type (PTY)

Besides transmitting the station name,

some FM stations also provide informa-

tion on the type of programme that they

are broadcasting. Your car radio can

receive and display this information.

Note:

If your device is configured for the USA

region, you can also use theTravelstore

feature in AM radio mode. The stations

will then be stored in the AMT memory

bank.

For example, the programme types can

be:

CULTURE

SPORT

ROCK

TRAVEL

NEWS

JAZZ

POP

Note:

Any stations that were previously stored

in this memory bank are deleted in the

process.

CLASSICS

You can use the PTY function to select

stations of a particular programme type.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

PTY-EON

Deactivating PTY

If you specify the programme type and To switch off the PTY function,

start seek tuning, the radio will switch

from the current station to a station of

the selected programme type.

➮ Whilst the programme types are

being displayed, press the softkey

5 assigned to the “PTY OFF” dis-

play item.

Note:

If the tuner does not find a station that

corresponds to the selected programme

type, you will hear a beep and “NO PTY”

appears briefly in the display. The radio

will then retune to the station that it re-

ceived last.

Selecting a programme type and

starting seek tuning

The PTY menu comprises several pag-

es on which the known programme

types are displayed. To browse through

the PTY menu’s pages,

➮ If the tuned radio station or another

station on the broadcasting net-

work broadcasts your selected pro-

gramme type at a later point in

time, the radio will automatically

switch from the currently tuned sta-

tion or from CD mode, MP3 mode

or CD-changer mode to the station

whose programme type matches

the one you selected.

➮ press the NEXT button 4 repeat-

edly until the programme type that

you want appears alongside one of

the softkeys.

➮ Press the softkey 5 assigned to

the programme type that you want.

➮ Move the joystick 8 up/right or

down/left to start seek tuning.

The next receivable station correspond-

ing to your selected programme type will

then be tuned into.

Activating PTY

To use the PTY function,

➮ press the TUNER button = while

If the tuner does not find a station that

corresponds to the selected programme

type, you will hear a beep and “NO PTY”

appears briefly in the display. The radio

will then retune to the station that it re-

ceived last.

in radio mode.

The radio functions menu appears in the

display.

➮ Press the NEXT button 4.

➮ Press the softkey 5 assigned to

Note:

the “PROG TYP” display item.

If you want to switch back to the pro-

gramme types display,

If PTY is activated, the display shows

the current programme type. PTY lights

up in the display. The programme types

are displayed alongside the softkeys 5.

➮ open the second page of the radio

functions menu again and press

the softkey 5 assigned to the

“PROG TYP” display item.

Download from Www.Somanuals.com. All Manuals Search And Download.

RADIO MODE

The radio functions menu appears in the

display.

Optimising radio reception

Treble reduction feature during

interference (HiCut)

➮ Repeatedly press the softkey 5

assigned to the “R-TEXT” display

item until the “RADIO TEXT ON” or

“RADIO TEXT OFF” setting that

you want is displayed.

The HiCut function has the effect of re-

ducing interference noise during poor

radio reception. If interference occurs,

the system automatically reduces the

treble thus reducing the interference lev-

el.

➮ Press the TUNER button = or the

joystick OK 8.

The settings are saved.

Setting HiCut

➮ Press the TUNER button = while

in radio mode.

The first page of the radio functions

menu is displayed.

➮ Press the NEXT button 4.

➮ Repeatedly press the softkey 5

assigned to the “HIGH CUT” dis-

play item until the setting that you

want appears in the display.

“HICUT 0” means that no automatic re-

duction of the treble and interference

level will be made; “HICUT 2” means

that a maximum reduction will be made.

➮ Press the joystick OK 8 or the

TUNER button = to close the

menu.

The settings are saved.

Activating/deactivating the radio

text display

Some stations use the RDS signal to

broadcast scrolling texts known as ra-

dio texts. You can allow radio texts to

be displayed or you can block them.

➮ Press the TUNER button = while

in radio mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

TIM

Switching TIM on/off

TIM - Traffic Information

Memory

The device is equipped with a digital

speech memory, which can automati-

cally record up to four traffic messages.

The maximum duration for recorded

messages is four minutes.

Whilst the car sound system is switched

on, you can turn the TIM function on/

off.

➮ Whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

If the TIM function is activated, the de-

vice records all the traffic information

messages that it receives during the two

hours after it was last switched off. In

addition, you can set two fixed timers.

The device records all the traffic mes-

sages that it receives from the tuned

traffic information station 30 minutes

before and 90 minutes after the set time.

This feature is particularly useful if you

generally use your car at fixed times.

The TIMPLAY menu is displayed.

The last message is played if traffic in-

formation messages have been record-

ed. The most recent message is num-

bered “TIM1”. The top line of the dis-

play shows the station name/frequen-

cy and the lower line displays the time

of the recording.

“TIM” and the message number are dis-

played on both sides of the display

alongside the top two softkeys.

All the messages are deleted if the last

message is older than six hours.

“NO TIM” appears briefly in the display

if no messages have been recorded.

If a new traffic message arrives whilst a

TIM is being played, playback will be

interrupted and the new message re-

corded.

Switching off TIM

If you want to switch off TIM,

➮ whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

Risk of damage to the electric

antenna in a car wash.

Your car’s automatic electric anten-

na will remain extended if TIM is ac-

tivated and you turn off the device.

Damage might result if the car an-

tenna remains extended whilst in a

carwash. For further details, read the

section entitled “Switching off TIM”.

The TIMPLAY menu is displayed.

➮ Press the NEXT button 4.

The TIMSET menu is displayed.

➮ Repeatedly press the softkey 5

assigned to the “TIM ON” display

item until “TIM RECORD OFF” ap-

pears in the display.

➮ Press the TUNER button = or the

joystick OK 8.

The settings are saved.

Download from Www.Somanuals.com. All Manuals Search And Download.

TIM

Note:

ed. The most recent message is num-

bered “TIM1”. The top line of the dis-

play shows the station name/frequen-

cy and below it the time of the record-

ing.

➮ If you do not switch on the device

within a period of 72 hours, the de-

vice will turn off the TIM function

automatically.

After the first message, all the other

messages are played in ascending or-

der.

Switching on TIM

If you want to switch TIM on again,

➮ whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

“NO TIM AVAILABLE” appears briefly

in the display if no messages have been

recorded. After the last message is

played, the device returns to its previ-

ous mode of operation.

The TIMPLAY menu is displayed.

➮ Press the NEXT button 4.

The TIMSET menu is displayed.

If you want to return to radio mode with-

out first listening to all the messages,

➮ Repeatedly press the softkey 5

assigned to the “TIM ON” display

item until “TIM RECORD ON” ap-

pears in the display.

➮ press the TUNER button = or the

joystick OK 8.

Selecting TIM messages

“TIM” and the message number are dis-

played on both sides of the display

alongside the top two softkeys.

➮ Press the TUNER button = or the

joystick OK 8.

The settings are saved.

If you want to listen to one of the dis-

played messages without listening to

the other messages:

Note:

➮ After you switch off the device via

the vehicle ignition or using button

1, the display will briefly show the

current setting (“TIM ON” or “TIM

OFF”).

➮ Press the softkey 5 assigned to

the corresponding display item:

“TIM1”, “TIM2”, “TIM3” or “TIM4”.

Recording traffic information

messages

Listening to stored traffic

messages

Whilst the device is switched on it auto-

matically records traffic information if it

is receiving a traffic information station

and priority for traffic information mes-

sages is activated.

To listen to the stored traffic messages,

➮ whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

The TIMPLAY menu is displayed.

If you are listening to a station that does

not broadcast traffic information and you

switch the device off whilst the TIM func-

The last message is played if traffic in-

formation messages have been record-

Download from Www.Somanuals.com. All Manuals Search And Download.

TIM

tion is activated, the device will auto- To save the settings,

matically search for a traffic information

➮ press the TUNER button = or the

station.

joystick OK 8.

Setting the timers

The settings are saved.

If TIM is activated, the traffic informa-

tion messages provided by a tuned traf-

fic information station will be recorded

for 2 hours after the device is switched

off. Furthermore, you can set two tim-

ers that record all the traffic information

messages received 30 minutes before

and 90 minutes after the set time. The

timer function uses the system time as

its reference. For details on setting the

system time, please read the chapter

entitled “CLOCK - time”.

Whilst TIM standby is activat-

ed, an electric antenna that is con-

nected to the device will remain ex-

tended.

Note:

➮ Before you drive into a carwash,

please make absolutely sure you

switch off TIM. For further details,

please read the section entitled

“Switching off TIM” in this chapter.

Selecting a timer

To set one of the timers,

Once you have set the timers, you can

then select which of the two timers to

activate. Generally, the timer that you

adjusted last is active.

➮ whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

The TIMPLAY menu is displayed.

➮ Press the NEXT button 4.

The TIMSET menu is displayed.

To select a timer,

➮ whilst you are in radio mode, press

and hold down the TUNER button

= for longer than two seconds.

➮ Press the softkey 5 assigned to

the “TIMER1” display item for the

first timer or “TIMER2” for the sec-

ond timer.

The TIM PLAY menu is displayed.

➮ Press the NEXT button 4.

The TIMSET menu is displayed.

The set time appears in the display, and

the hours flash.

➮ Press the softkey 5 assigned to

the “TIMER1” display item to select

the first timer or “TIMER2” to select

the second timer.

➮ Move the joystick 8 up or down to

adjust the hours.

➮ Move the joystick 8 to the right to

➮ Press the TUNER button = or the

joystick OK 8.

change the input position.

The minutes flash.

The settings are saved.

➮ Move the joystick 8 up or down to

adjust the minutes.

Download from Www.Somanuals.com. All Manuals Search And Download.

TRAFFIC INFORMATION

If you want to deactivate priority for traf-

fic announcements in general,

Traffic information

Your device is equipped with an RDS-

EON receiver. EON (Enhanced Other

Network) is a feature that involves the

broadcasting of radio station informa-

tion within a broadcasting network.

➮ press the softkey 5 assigned to

the “TA OFF” display item.

Note:

You will hear a warning beep:

Whenever a traffic announcement (TA)

is broadcast, the system switches au-

tomatically from a station that does not

provide traffic reports to the appropri-

ate traffic information station within the

broadcasting network that does. Once

the traffic report has been played, the

system will switch back to the pro-

gramme that you were listening to be-

fore.

➮ if you leave the reception area of a

traffic information station that you

are currently listening to.

➮ if, while listening to a CD, you

leave the reception area of a traffic

information station that the system

is tuned into, and the subsequent

automatic search cannot find a

new traffic information station.

➮ if you retune the radio from a traffic

information station to a station that

does not broadcast traffic informa-

tion.

If you hear the warning beep, you can

either switch off traffic information pri-

ority or tune into a station that broad-

casts traffic information.

Switching traffic information

priority on/off

➮ Press the TUNER button = while

in radio mode.

The radio functions menu appears in the

display.

➮ Repeatedly press the softkey 5

assigned to the “TRAFFIC” display

item until the “TRAFFIC INFO ON”

or “TRAFFIC INFO OFF” setting

that you want is displayed.

Setting the volume for traffic

announcements

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

Note:

the “VOLUME” display item.

The TAmenu is displayed during a traf-

fic announcement.

➮ Press the softkey 5 assigned to

the “TRAFFIC” display item.

To interrupt the current traffic announce-

ment,

➮ Set the volume level that you want

using the volume control 2.

➮ press the softkey 5 assigned to

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

the “TA EXIT” display item.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD MODE

CD mode

The CD menu appears and the CD

starts playing.

You can use this device to play stand-

ard CDs with a diameter of 12 cm. CD-

Rs and CD-RWs (CDs that you have

“burned” yourself) can generally also be

played. Due to the varying quality of CD

blanks, Blaupunkt cannot guarantee

that this will work properly. To ensure

the system functions properly, only use

CDs labelled with the compact disc logo.

Problems might be experienced when

trying to play copy-protected CDs. Blau-

punkt cannot guarantee the proper func-

tioning of copy-protected CDs!

➮ If a CD is already inserted in the

device,

➮ press the SOURCE button < re-

peatedly until CD mode is dis-

played.

The CD menu appears and playback

begins from the point at which it was

last interrupted.

Ejecting a CD

➮ press the

button 7.

The control panel opens out towards

you and the CD is ejected.

Risk of severe damage to the

CD drive! CD singles with a diame-

ter of 8 cm and non-circular con-

toured CDs (shape CDs) must not

be used. We accept no responsibili-

ty for any damage to the CD drive

that may occur as a result of the use

of unsuitable CDs.

➮ Carefully remove the CD.

➮ Press the

button 7.

The control panel closes.

Selecting tracks

➮ Move the joystick 8 in one direc-

tion (up or right for the next track or

down or left for the previous track)

until the number of the track that

you want appears in the display.

Switching to CD mode and

inserting a CD

➮ If there is no CD inserted in the de-

vice yet,

If you press the joystick 8 downwards

once or to the left once, the current track

will be played again from the beginning.

➮ press the

The control panel opens out towards

you.

button 7.

Fast searching (audible)

➮ Insert the CD with the printed side

uppermost into the CD compart-

ment.

To fast search backwards or forwards,

➮ press and hold down the joystick

8 in one direction (up or right for

forwards or down or left for back-

wards) until fast searching begins.

The drive draws in the CD.

You must not hinder or assist the drive

as it draws in the CD.

The control panel closes automatically.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD MODE

Random track play (MIX)

Scanning tracks (SCAN)

You can briefly play (scan) all the tracks

on the CD.

➮ Press the softkey 5 assigned to

the “MIX” display item.

➮ Press and hold down the joystick

OK 8 for longer than two sec-

onds.

“MIX CD” appears briefly in the display.

The next track to be played will be

picked at random.

The subsequent tracks on the CD are

briefly played in ascending order.

Cancelling MIX

➮ Press the softkey 5 assigned to

Note:

the “MIX” display item again.

➮ You can set the scanning time. For

further details, please read the sec-

tion entitled “Setting the scanning

time” in the “Radio mode” chapter.

“MIX OFF” appears briefly in the dis-

play.

Repeating tracks (REPEAT)

Cancelling SCAN and continuing

listening to a track

➮ Press the softkey 5 assigned to

the “REPEAT” display item.

To cancel scanning,

“REPEATTRACK” appears briefly in the

display. The track is repeated continu-

ously until you deactivate REPEAT.

➮ press the joystick OK 8.

The currently scanned track will then

continue to be played normally.

Cancelling REPEAT

➮ Press the softkey 5 assigned to

Displaying CD text

the “REPEAT” display item again.

Some CDs include CD text. The CD text

might contain the names of the artist,

album and tracks.

“REPEAT OFF” appears briefly in the

display.

Normal playback is then resumed.

You can allow the CD text to be dis-

played as scrolling text in the bottom line

of the display every time you switch to

another track.

If the inserted CD does not contain any

CD text, “NO TEXT” will appear briefly

in the display if the CD text feature is

activated.

Switching CD text on/off

➮ Repeatedly press the softkey 5

assigned to the “TEXT” display

item until “CD TEXT ON” or “CD

TEXT OFF” is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD MODE

MP3 MODE

Setting scrolling text

MP3 mode

You can allow the CD text to be dis-

played as scrolling text in the bottom line

of the display.

You can also use this car sound sys-

tem to play CD-Rs and CD-RWs that

contain MP3 music files.

Switching CD scrolling text on/off

Preparing an MP3-CD

➮ Repeatedly press the softkey 5

assigned to the “SCROLL” display

item until “SCROLL ON” or

The various combinations of CD burn-

ers, CD burning software and CD blanks

may lead to problems arising with the

device’s ability to play certain CDs. If

problems occur with your own burned

CDs, you should try another brand of

CD blank or choose another colour of

CD blank.

“SCROLL OFF” is displayed.

Traffic announcements in CD

mode

➮ Repeatedly press the softkey 5

assigned to the “TRAFFIC” display

item until the “TRAFFIC INFO ON”

or “TRAFFIC INFO OFF” setting

that you want is displayed.

The format of the CD must be ISO 9660

Level 1 or Level 2 or Joliet. Other for-

mats cannot be played reliably.

Avoid multi-sessions. If you write more

than one session to the CD, only the

first session will be detected.

You can create a maximum of 127 di-

rectories on a CD. You can use this de-

vice to access each of these directo-

ries.

Each directory can in turn contain up to

254 tracks and subdirectories that can

also be accessed. A maximum of 8 lev-

els of directories are allowed.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 MODE

Fig. 1

D01

Fig. 2

D01

If you like your files to be in the correct

order, you should use burner software

that places files in alphanumerical or-

der. If your software does not provide

this feature you also have the option of

sorting the files manually. To do so, you

should place a number (e.g. “001”,

“002”, etc.) at the beginning of each file

name - you must include the leading

zeros.

T001

D02

D03

T002

T003

T004

T005

T006

T007

T008

T009

T010

T011

D04

T001

MP3 tracks can contain additional in-

formation such as the artist, album and

track names (ID3 tags). This device can

display version 1 ID3 tags.

T001

T002

T003

T004

T005

T002

T003

T004

T005

T006

T007

T008

T009

T010

T011

This device can only play MP3 files that

have the “.MP3” file extension.

D05

T001

T002

T003

T004

T005

T006

T007

Note:

To ensure uninterrupted playback,

➮ do not try changing the file exten-

sion to “.MP3” of any files other

than MP3 files and then attempt to

play them!

Since using some burner software can

lead to inconsistencies in the way items

are numbered, you should ensure that

the root directory D01 either contains

only subdirectories containing tracks

(Fig. 1) or only tracks (Fig. 2).

➮ Do not use “mixed” CDs containing

both non-MP3 data and MP3

tracks.

➮ Do not use mix-mode CDs contain-

ing both audio tracks and MP3

tracks.

You can name each directory using a

PC. The device is capable of displaying

the directory name. Name the directo-

ries and tracks using your CD burner

software. The software’s instruction

manual will provide details on how to

do this.

Switching to MP3 mode

MP3 mode is activated in the same way

as normal CD mode. For further details,

please read the section entitled “Switch-

ing to CD mode / Inserting a CD” in the

“CD mode” chapter.

Note:

➮ When naming directories and

tracks you should avoid using ac-

cents and special characters.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 MODE

Note:

Selecting a directory

Selecting from the directory list

➮ Any directories not containing MP3

files will be skipped automatically.

If, for instance, you are listening to

tracks in directory D01 and you se-

lect the next directory by pressing

the joystick 8, directory D02

(which does not contain any MP3

tracks) will be skipped and D03 will

be played (see diagram). The dis-

play will then automatically switch

from “D02” to “D03”.

You can display a list of all the directo-

ries on the inserted CD and then con-

veniently select a directory from it. The

directories are displayed with the names

that you created when burning the CD.

➮ Press the NEXT button 4 whilst

an MP3 is playing.

The track list is displayed for the cur-

rent directory.

Selecting tracks

➮ Move the joystick 8 to the left or

right to switch to the directory list.

Selecting tracks from a track list

➮ Press the joystick 8 up or down to

You can display a list of all the tracks in

the current directory and then conven-

iently select a track from it.

browse through the list.

➮ If you want to select a directory

from the list, move the selection

marker to the directory that you

want and press the joystick OK 8.

➮ To display the track list, press the

NEXT button 4.

➮ Press the joystick 8 up or down to

The list of tracks in the selected direc-

tory is displayed.

browse through the track list.

➮ If you want to select a track from

the list, move the selection marker

to the track that you want and

press the joystick OK 8.

➮ Move the selection marker to the

track that you want and press the

joystick OK 8.

➮ Press the NEXT button 4 to dis-

play the main MP3 menu again.

Selecting a directory using the

joystick

Selecting tracks using the joystick

To move up or down to another track in

the current directory,

To move up or down to another directo-

ry,

➮ move the joystick 8 to the right for

the next track or to the left for the

previous track until the number of

the track that you want appears in

the display.

➮ repeatedly press the joystick 8 up

or down until the number of the di-

rectory that you want appears at

the very beginning of the top line of

the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 MODE

If you press the joystick 8 to the left

once, the current track will be played

again from the beginning.

Random track play (MIX)

To play the tracks in the current directo-

ry in random order,

Fast searching (audible)

To fast search backwards or forwards,

➮ press the softkey 5 assigned to

the “MIX” display item.

“MIX DIR” appears in the display.

➮ press and hold down the joystick

8 to the left or right until fast

searching backwards/forwards be-

gins.

To play the tracks contained in all the

directories on the inserted MP3-CD in

random order,

➮ press the softkey 5 assigned to

Scanning tracks (SCAN)

You can briefly play (scan) all the tracks

on the CD.

the “MIX” display item again.

“MIX CD” appears in the display.

Cancelling MIX

➮ Press and hold down the joystick

OK 8 for longer than two sec-

onds.

To cancel MIX,

➮ repeatedly press the softkey 5 as-

signed to the “MIX” display item un-

til “MIX OFF” appears in the dis-

play.

The subsequent tracks on the CD are

briefly played in ascending order.

Note:

➮ You can set the scanning time. For

further details, please read the sec-

tion entitled “Setting the scanning

time” in the “Radio mode” chapter.

Repeating individual tracks or

whole directories (REPEAT)

➮ Press the softkey 5 assigned to

the “REPEAT” display item.

Cancelling SCAN and continuing

listening to a track

“REPEATTRACK” appears briefly in the

display.

To cancel scanning,

To repeat the whole directory,

➮ press the joystick OK 8.

The currently scanned track will then

continue to be played normally.

➮ press the softkey 5 assigned to

the “REPEAT” display item again.

“REPEAT DIR” appears briefly in the

display.

Download from Www.Somanuals.com. All Manuals Search And Download.

MP3 MODE

Cancelling REPEAT

➮ Repeatedly press the softkey 5

assigned to the “INFO” display item

until the display that you want ap-

pears in the bottom line of the dis-

play.

To stop the current track or current di-

rectory from being repeated,

➮ repeatedly press the softkey 5

that is assigned to the “REPEAT”

display item until “REPEAT OFF”

appears briefly in the display.

Note:

If the information on the artist, track and

album is not available in the form of an

ID3 tag, you will not be able to select it.

Configuring the display

There are various options available for

displaying the name of the artist, track

and album (ID3 tag) or the directory and

file name. The information contained in

the ID3 tag (album, artist and track) can

only be displayed if it was saved when

the CD and MP3 file were created.

Displaying all of the information for

a file once

To display all of the available informa-

tion for a track as well as the directory

name and file name (info displayed once

as scrolling text),

The track name is always displayed in ➮ press the softkey 5 assigned to

the top line of the display during play-

back. The track name appears once as

scrolling text after a track change and

is then abbreviated to 16 characters and

displayed.

the “SHOW ALL” display item.

If available, the information is displayed

once as scrolling text in the info line.

“SHOW ALL” flashes in the display

whilst the information is being shown.

Note:

Setting scrolling text

If the track name is not available in the

ID3 tag, the system will display the file

name instead.

You can choose whether you want the

display that you set under “Selecting

information in the info line” to appear

as scrolling text (“SCROLL ON”) or only

once (“SCROLL OFF”).

You can choose between different items

of information to be displayed in the

bottom line of the display (info line).

➮ Repeatedly press the softkey 5

assigned to the “SCROLL” display

item until the setting that you want

appears.

Selecting information in the info line

In the bottom line of the display (info

line) you can choose between display-

ing the various items of MP3 informa-

tion such as track, artist, album or di-

rectory number (DIR) / file name.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD-CHANGER MODE

Selecting CDs

To move up or down to another CD,

CD-changer mode

(optional)

To find out which CD changers / Com-

pact Drive MP3 can be used with this

device, please refer to the “Accessories”

chapter in these instructions or contact

your Blaupunkt dealer.

➮ press the softkey 5 assigned to

the display item of the CD that you

want (CD1 - CD10). To do so you

might need to switch “pages” in the

main CD-changer menu by press-

ing the softkey 5 assigned to the

“NEXT” or “PREVIOUS” display

item.

Note:

Information on handling CDs, inserting

CDs and operating the CD changer can

be found in the operating instructions

supplied with your CD changer.

➮ repeatedly press the joystick 8 up

or down until the number of the CD

that you want appears in the dis-

play.

Information on using the Compact Drive

MP3 and recording music tracks onto

the Compact Drive MP3’s Microdrive™

hard disk can be found in the operating

instructions supplied with the Compact

Drive MP3.

Selecting tracks

To move down or up to another track

on the current CD,

Switching to CD-changer mode

➮ repeatedly press the joystick 8 to

the left or right until the number of

the track that you want is dis-

played.

➮ Press the SOURCE button < re-

peatedly until the CD-changer

menu is displayed.

Playback continues from the point at

which it was last interrupted.

If you press the joystick 8 once to the

left, the current track will be played again

from the beginning.

If the magazine was removed from the

CD changer and then replaced, the CD

magazine will first be scanned, and play-

back will begin from the first track on

the first CD that the CD changer detects.

Fast searching (audible)

To fast search forwards or backwards,

➮ press and hold down the joystick

8 to the left or right until fast

searching backwards/forwards be-

gins.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD-CHANGER MODE

“REPEAT CD” appears briefly in the dis-

play.

Scanning tracks (SCAN)

You can briefly play (scan) all the tracks

on the CD.

Cancelling REPEAT

➮ Press and hold down the joystick

OK 8 for longer than two sec-

onds.

To stop the current track or current CD

from being repeated,

➮ repeatedly press the softkey 5 as-

signed to the “REPEAT” display

item again (whilst the CD-changer

functions menu is being displayed)

until “REPEAT OFF” appears brief-

ly in the display.

The subsequent tracks on the CD are

briefly played in ascending order.

Note:

➮ You can set the scanning time. For

further details, please read the sec-

tion entitled “Setting the scanning

time” in the “Radio mode” chapter.

Random track play (MIX)

To play the tracks on the current CD in

random order,

Cancelling SCAN and continuing

listening to a track

➮ press the NEXT button 4.

The CD-changer functions menu ap-

pears.

To cancel scanning,

➮ press the joystick OK 8.

The currently scanned track will then

continue to be played normally.

➮ Press the softkey 5 assigned to

the “MIX” display item.

“MIX CD” appears in the display.

Repeating individual tracks or

whole CDs (REPEAT)

To repeat the current track,

To play the all the tracks on all inserted

CDs in random order,

➮ press the softkey 5 assigned to

➮ press the NEXT button 4.

The CD-changer functions menu ap-

pears.

the “MIX” display item again.

“MIX ALL” appears in the display.

Cancelling MIX

➮ Press the softkey 5 assigned to

To cancel MIX,

the “REPEAT” display item.

“REPEATTRACK” appears briefly in the

display.

➮ repeatedly press the softkey 5 as-

signed to the “MIX” display item un-

til “MIX OFF” appears briefly in the

display.

To repeat the whole CD,

➮ press the softkey 5 assigned to

the “REPEAT” display item again

whilst the CD-changer functions

menu is being displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

CD-CHANGER MODE

Deleting a CD name

Naming CDs

The car sound system allows you to ➮ Listen to the CD whose name you

assign names for up to 99 CDs (not with

the Compact Drive MP3) so that you can

recognise them more easily. The names

can be a maximum of seven charac-

ters long.

want to delete.

➮ Press the NEXT button 4.

The CD-changer functions menu ap-

pears.

➮ Press the softkey 5 assigned to

“FULL” will appear in the display if you

try assigning more than 99 names.

the “CD NAME” display item.

➮ Press and hold down the softkey

5 assigned to the “CLEAR CD”

display item for longer than two

seconds.

Entering/editing CD names

➮ Listen to the CD that you want to

name.

➮ Press the NEXT button 4.

The CD name will be deleted.

The CD-changer functions menu ap-

pears.

Deleting all CD names

➮ Listen to a CD.

➮ Press the softkey 5 assigned to

➮ Press the NEXT button 4.

the “CD NAME” display item.

The CD-changer functions menu ap-

pears.

The current name of the CD is displayed

in the top line of the display. If the CD

has not been named yet, seven under-

scores “_” will be displayed instead.

➮ Press the softkey 5 assigned to

the “CD NAME” display item.

➮ Press the softkey 5 assigned to

➮ Press and hold down the softkey

5 assigned to the “CLEAR ALL”

display item for longer than two

seconds.

the “EDIT” display item.

You will now enter edit mode. The first

input position flashes.

The CD names will be deleted.

➮ Move the joystick 8 up or down to

select the character that you want.

If you want an empty space, simply

select the underscore.

Note:

This function is not available for the

Compact Drive MP3. If you use this

function with the Compact Drive MP3,

“CDC CLEAR” is displayed for 45 sec-

onds. You will not be able operate the

device during this time period.

➮ Move the joystick 8 to the left or

right to change the input position.

➮ To save the name, press the joy-

stick OK 8.

Download from Www.Somanuals.com. All Manuals Search And Download.

CLOCK TIME

CLOCK time

➮ Adjust the minutes by moving the

joystick 8 up or down.

Setting the clock time

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The clock can be set automatically us-

ing the RDS signal. You can also set

the clock manually if you cannot receive

a radio station that supports this feature.

The settings are saved.

Setting the date

Setting the clock automatically

To set the clock automatically,

➮ press the MENU button 9.

To set the date,

➮ press the MENU button 9.

➮ Press the softkey 5 assigned to

the “CLOCK” display item.

➮ Press the softkey 5 assigned to

➮ Repeatedly press the softkey 5

assigned to the “AUTOSYNC” dis-

play item until “AUTOSYNC ON”

appears in the display.

the “DATE” display item.

The year (YY), month (MM) and day

(DD) appear in the top line of the dis-

play.

“AUTOSYNC ON” means that the clock

is set automatically using the RDS sig-

nal.

The input position for year flashes.

➮ Set the year (e.g. “04” for 2004) by

moving the joystick 8 up or down.

Setting the clock manually

➮ Move the joystick 8 to the right to

➮ To set the clock, press the MENU

button 9.

switch the input position to month.

➮ Set the month by moving the joy-

stick 8 up or down.

➮ Press the softkey 5 assigned to

the “CLOCK” display item.

➮ Press the joystick 8 to the right to

➮ Press the softkey 5 assigned to

switch the input position to day.

the “TIME” display item.

➮ Set the day by moving the joystick

8 up or down.

The hours and minutes are displayed

in the top line of the display. The hours

flash.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

➮ Adjust the hours by moving the joy-

stick 8 up or down.

The settings are saved.

To adjust the minutes,

➮ press the joystick 8 to the right.

The minutes flash.

Download from Www.Somanuals.com. All Manuals Search And Download.

CLOCK TIME

DSA MAX EQUALIZER

Displaying the clock time

continuously

DSA Max - Digital Sound

Adjustment

You can make the system display the

clock time when the device is off and

the vehicle ignition is on.

This device is equipped with a digital

sound calibration feature (DSA - Digital

Sound Adjustment).

➮ Press the MENU button 9.

It provides you with three self-calibrat-

ing user equalizers (EQ1, EQ2 and

EQ3). Each user equalizer consists of

a 27-band graphic equalizer.

➮ Press the softkey 5 assigned to

the “CLOCK” display item.

➮ Press the softkey 5 assigned to

Each user equalizer has four channels

(front right/left and rear right/left) at its

disposal. The EQ1 - EQ3 equalizers can

be calibrated automatically with the help

of the calibration microphone (included).

You can also manually adjust the auto-

matically ascertained values of the

graphic equalizer.

the “OFFCLOCK” display item.

“SHOW CLOCK” means that the clock

time will be displayed; “HIDE CLOCK”

means it will not be displayed.

In addition, you can also optimise the

sound using a dynamic vehicle noise

cover-up feature (DNC), various presets

for different music styles (Preset EQ),

stage effects and sound effects.

Switching DSA on/off

Switching DSA off

To switch off the entire equalizer,

➮ press and hold down the AUDIO

button : for longer than two sec-

onds.

The DSA menu appears in the display.

➮ Press the softkey 5 assigned to

the “OFF” display item.

“DSA OFF” appears in the display.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSA MAX EQUALIZER

Note:

For Situation 3, you should position the

calibration microphone at head height

in the centre of the vehicle interior (left/

right, front/rear).

➮ You can activate/deactivate each

equalizer module individually (user

EQ, sound presets, DNC, stage ef-

fects and sound effects) in the cor-

responding menu.

Really quiet surroundings are required

for the calibration.Any extraneous noise

will distort the measured values. The

windows, doors and sunroof must re-

main closed during the calibration proc-

ess. You should be seated in the driv-

ing seat throughout this procedure.

Switching on DSA

To switch the equalizer on again,

➮ press and hold down the AUDIO

button : for longer than two sec-

onds.

Note:

The DSA menu appears in the display.

➮ The sound radiating from the loud-

speakers must not be obstructed

by any objects. All the loudspeak-

ers must be connected. The cali-

bration microphone must be con-

nected to the device, and equalizer

calibration should be carried out

before DNC calibration.

➮ Press the softkey 5 assigned to

the “USER EQ” display item.

➮ Select an equalizer setting.

Automatically calibrating the

equalizer

You can electronically calibrate and

store values for three different situations,

e.g.:

To calibrate an equalizer,

➮ press and hold down the AUDIO

button : for longer than two sec-

onds.

EQ 1 for the driver only

EQ 2 for the driver and front passen-

ger

➮ Press the softkey 5 assigned to

EQ 3 for the front and rear occupants

the “USER EQ” display item.

Hold the microphone in the appropriate

position whilst calibration is taking place.

➮ Press the softkey 5 assigned to

the display item of the equalizer

(“EQ-1”, “EQ-2” or “EQ-3”) that you

want to calibrate.

The position of the calibration micro-

phone for Situation 1 (e.g. for the driver

alone) is at the height of the driver’s

head, approx. 10 cm next to the right

ear.

➮ Press the softkey 5 assigned to

the “ADJUST” display item.

➮ Press the softkey 5 assigned to

For Situation 2, the calibration micro-

phone should be positioned at head

height between the driver and the front

passenger.

the “AUTO ADJ” display item.

A countdown starts in the display. You

have the opportunity to position the cal-

ibration microphone during this time

Download from Www.Somanuals.com. All Manuals Search And Download.

DSA MAX EQUALIZER

period. Calibration begins as soon as

the countdown is finished.

any of the softkeys that are de-

scribed below.

If you want to select the equalizer view

without equalization,

➮ Proceed as described for all the

equalizers.

➮ press the softkey 5 assigned to

the “VIEW PRE” display item on

the left of the display for the front or

on the right of the display for the

rear.

When calibration has ended, the menu

for the selected equalizer is displayed

again.

Viewing the vehicle acoustics

with/without equalization

The equalizer setting is displayed.

You can view the ascertained values for

the vehicle acoustics. When viewing the

settings, you can choose between the

equalizer view without equalization

(“PRE EQ”) or with equalization (“POST

EQ”).

If you want to select the equalizer view

with equalization,

➮ press the softkey 5 assigned to

the “VIEWPOST” display item on

the left of the display for the front or

on the right of the display for the

rear.

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

The equalizer setting is displayed.

To close the view,

➮ Press the softkey 5 assigned to

➮ press the joystick OK 8 or the

AUDIO button :.

the “USER EQ” display item.

➮ Press the softkey 5 assigned to

the display item of the equalizer

that you want to view.

Adjusting the graphic equalizer

manually

You can also manually adjust the auto-

matically ascertained values of the

graphic equalizer.

➮ Press the softkey 5 assigned to

the “ADJUST” display item.

➮ Press the softkey 5 assigned to

the “MANUAL” display item.

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

You can view the equalizer settings for

the front and rear loudspeakers sepa-

rately.

➮ Press the softkey 5 assigned to

the “USER EQ” display item.

Note:

➮ If you have already adjusted the

graphic equalizer manually or if you

have not carried out any calibration

yet, you will not be able to select

➮ Press the softkey 5 assigned to

the display item of the equalizer

that you want to set up.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSA MAX EQUALIZER

➮ Press the softkey 5 assigned to

the “USER EQ” display item.

the “ADJUST” display item.

➮ Press the softkey 5 assigned to

the display item of the equalizer

that you want to use.

➮ Press the softkey 5 assigned to

the “MANUAL” display item.

You can adjust the equalizer for the front

and rear loudspeakers separately.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

➮ Press the softkey 5 assigned to

the “FRONT EQ” display item for

the front loudspeakers or “REAR

EQ” for the rear loudspeakers.

The settings are saved.

Resetting the equalizer

The graphic equalizer settings are dis-

played.

You can reset all the automatically as-

certained values of the selected equal-

izer.

To select the frequency,

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

➮ repeatedly press the joystick 8

left or right until the frequency that

you want is displayed.

➮ Press the softkey 5 assigned to

➮ Adjust the gain for the frequency by

moving the joystick 8 up or down.

the “USER EQ” display item.

➮ Press the softkey 5 assigned to

the display item of the equalizer

that you want to reset.

The values appear graphically in the

display whilst you are adjusting the

equalizer.

➮ Press the softkey 5 assigned to

➮ Adjust all the settings for both

the “ADJUST” display item.

channels as described earlier on.

➮ Press and hold down the softkey

5 assigned to the “CLEAR” dis-

play item for longer than two sec-

onds.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

The settings are saved.

The automatically ascertained values of

the equalizer are cleared.

Selecting an equalizer

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

After calibration has taken place or af-

ter you have finished making manual

adjustments,

The settings are saved.

➮ press and hold down the AUDIO

button : for longer than two sec-

onds.

Download from Www.Somanuals.com. All Manuals Search And Download.

DSA MAX EQUALIZER

Selecting a stage effect

Selecting sound presets

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

You can select sound presets for vari-

ous music styles. To ensure optimum

sound, the presets are “added” to the

settings of the active user equalizer, i.e.

the user EQs are optimised using the

presets for the various music styles.

➮ Press the softkey 5 assigned to

the “STAGING” display item.

➮ Press the softkey 5 assigned to

the “LEFT” display item for a stage

effect for the driver.

Presets for the following music styles

are available:

➮ VOCAL

➮ DISCO

➮ ROCK

➮ JAZZ

➮ Press the softkey 5 assigned to

the “RIGHT” display item for a

stage effect for the front passenger.

➮ Press the softkey 5 assigned to

the “FRONT” display item for a

stage effect for the driver and front

passenger.

➮ CLASSIC

The settings for these music styles have

already been programmed.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

The settings are saved.

➮ Press the softkey 5 assigned to

Setting the distance of the

loudspeakers

the “PRESET” display item.

➮ Press the softkey 5 assigned to

the display item of the sound pre-

set that you want to use.

To further optimise the stage effect, you

can set the distance of the in-car loud-

speakers relative to the front left seat.

You can set the distance to the front

loudspeakers between 0-200 cm and

the distance to the rear loudspeakers

between 0-400 cm.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

The settings are saved.

➮ Select the stage effect as de-

Setting the stage effect

scribed earlier on.

You can activate a stage effect that

“repositions” the music in front of the

driver and/or front passenger. This gives

you the impression you are standing

directly in front of a stage. You can set

the distance to your loudspeakers in

order to optimise this effect.

➮ Press the NEXT button 4.

➮ Select the softkey assigned to the

loudspeaker whose distance set-

ting you want to set. “RR” is right

rear, “LR” is left rear, “RF” is right

front and “LF” is left front.

Download from Www.Somanuals.com. All Manuals Search And Download.

DNC

DSA MAX EQUALIZER

➮ Turn the volume control 2 or

move the joystick 8 to adjust the

distance.

DNC - Dynamic Noise

Covering

The Dynamic Noise Covering feature

increases the volume whilst the vehicle

is driving. As its starting point it uses a

volume level that is considered pleas-

ant whilst the vehicle is stationary.

➮ Proceed in the same way for all the

loudspeakers and press the joy-

stick OK 8 or the AUDIO button

: to close the menu.

The settings are saved.

The volume is boosted by a different

amount for each frequency band de-

pending on how noise develops in the

vehicle.

Selecting the sound effect

You can choose between different

sound effects for your music:

This ensures that the volume level and

sound characteristics can still be appre-

ciated even if noise in the vehicle var-

ies. Noises that only last a short time,

such as when crossing railway tracks,

are not taken into account.

➮ CATHEDRAL

➮ THEATER

➮ CONCERT

➮ CLUB

➮ STADIUM

Calibrating DNC

These sound effects have already been

programmed.

In order for this feature to work properly

for your vehicle, you must calibrate it

using the calibration microphone.

Please carry out the DNC calibration

after the DSA calibration. Before carry-

ing out the calibration, you should per-

manently attach the calibration micro-

phone near the console using the sup-

plied Velcro tape. However, do not place

it in the footwell, near locations where

booming sounds can be heard or near

the ventilation/heating.

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

➮ Press the softkey 5 assigned to

the “EFFECTS” display item.

➮ Press the softkey 5 assigned to

the display item of the sound effect

that you want to use.

If you do not want to use any sound ef-

fects,

The calibration microphone’s opening

must point towards the passenger com-

partment. Calibration should be carried

out in a quiet location whilst the engine

is switched off. Keep the doors, windows

and sunroof closed, and sit yourself in

the driver’s seat whilst calibration is tak-

ing place.

➮ press the softkey 5 assigned to

the “OFF” display item.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

The settings are saved.

100

Download from Www.Somanuals.com. All Manuals Search And Download.

DNC

Starting DNC calibration

Selecting the DNC boost

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

You can select the DNC boost (i.e. the

sensitivity of the volume and sound

boost) to five levels.

The “DNC 1” setting is suitable for vehi-

cles with a loud engine and music with

a lot of bass. The “DNC 5” setting is

suitable for vehicles with a quiet engine

and for classical music. Find out the best

setting for your situation by trying out

the various settings.

➮ Press the softkey 5 assigned to

the “DNC” display item.

➮ Press the softkey 5 assigned to

the “ADJUST” display item.

A countdown starts in the display. Cali-

bration begins as soon as the count-

down is finished.

To select a DNC boost level,

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

➮ press and hold down the AUDIO

button : for longer than two sec-

onds.

Switching off DNC

To switch off DNC,

➮ Press the softkey 5 assigned to

the “DNC” display item.

➮ Press the softkey 5 assigned to

➮ Press and hold down the AUDIO

button : for longer than two sec-

onds.

the “LEVEL” display item.

➮ Set the boost level using the joy-

stick 8.

➮ Press the softkey 5 assigned to

the “DNC” display item.

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

➮ Press the softkey 5 assigned to

the “OFF” display item.

“DNC OFF” appears in the display.

To switch DNC on again,

The settings are saved.

➮ select a DNC boost level (DNC1 -

DNC5).

➮ Press the joystick OK 8 or the

AUDIO button : to close the

menu.

The settings are saved.

101

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBWOOFER AND CENTRE SPEAKER

Adjusting the subwoofer phase

Subwoofer and centre

speaker

You can connect a subwoofer and a

centre speaker to this device.

You can adjust the phase of the sub-

woofer output to suit your subwoofer.

The phase setting can be adjusted in

steps of “45°” to between “-135°” and

“180°”.

In order to optimise the sound still fur-

ther when using a subwoofer and cen-

tre speaker, you can set a low-pass fil-

ter for the subwoofer and a high-pass

filter for the front and rear channels sep-

arately.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

the “SUBOUT” display item.

Adjusting the subwoofer boost

level (gain)

➮ Press the softkey 5 assigned to

the “PHASE” display item.

You can set a permanent volume boost/

reduction level between -6 and +6 for

the connected subwoofer and therefore

emphasise or tone down the subwoof-

er’s bass reproduction. The setting that

you should select depends on the in-

stallation position and location of the

subwoofer in your vehicle. If necessary,

find out which setting you prefer by try-

ing out the various settings.

➮ Move the joystick 8 to switch be-

tween the available settings.

When you have finished making your

changes,

➮ press the joystick OK 8 or the

AUDIO button :.

Setting up the low-pass filter

You can use the low-pass filter to set a

frequency up to which the subwoofer

will work. All the signals above the set

frequency will be “cut off” and not sent

to the subwoofer.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

the “SUBOUT” display item.

You can choose between the following

frequencies: “40 Hz”, “50 Hz”, “63 Hz”

and “100 Hz”. If your subwoofer is fitted

with a built-in low-pass filter, you can

also select the “FLAT” setting and thus

allow all the frequencies to be sent to

the subwoofer.

➮ Press the softkey 5 assigned to

the “GAIN” display item.

➮ Move the joystick 8 up/right to

boost the gain or move it down/left

to reduce the gain.

When you have finished making your

changes,

You should adjust this setting to suit the

frequency range and capabilities of your

subwoofer. For further information,

please read the subwoofer’s documen-

tation.

➮ press the joystick OK 8 or the

AUDIO button :.

102

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBWOOFER AND CENTRE SPEAKER

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display. “AUDIO MENU” appears in the display.

➮ Press the softkey 5 assigned to

the “SUBOUT” display item.

➮ Press the softkey 5 assigned to

the “LOWPASS” display item.

the “SUBSONIC” display item.

➮ Move the joystick 8 to switch be-

➮ Move the joystick 8 left or right to

choose between the available fre-

quencies.

tween the available settings.

When you have finished making your

changes,

➮ Move the joystick 8 up or down to

select the quality factor that you

want for the set frequency.

➮ press the joystick OK 8 or the

AUDIO button :.

When you have finished making your

changes,

Setting up the subsonic filter

To avoid interference due to extremely

low frequencies, you can set the sub-

sonic filter to limit the frequency re-

sponse of the device at the lower end

of the range. This makes particularly

good sense if you are using a small sub-

woofer. If you set up the subsonic filter,

all the frequencies below the set fre-

quency will be suppressed. When set-

ting up the subsonic filter, you should

base the settings that you choose on

the specifications of the loudspeakers

in your vehicle.

➮ press the joystick OK 8 or the

AUDIO button :.

Setting up the centre speaker

You can select the frequency above

which you want a connected centre

speaker to be driven.

The following frequencies are available:

“200 Hz”, “400 Hz”, “800 Hz”, “1600 Hz”

and “3200 Hz”. If you select the “FLAT”

setting, all the frequencies (including the

bass) will be reproduced by the centre

speaker. You should only select this

setting if your centre speaker has a built-

in high-pass filter.

The following frequencies are available:

“20 Hz”, “25 Hz”, “32 Hz” and “40 Hz”.

You can also set a quality factor “Q” in

five steps for the selected frequency:

“Q1”=0.5, “Q2”=0.7, “Q3”=0.9, “Q4”=1.1

and “Q5”=1.3.

Besides the frequency, you can also

adjust the gain for the centre speaker.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the NEXT button 4.

“AUDIO MENU 2” appears in the dis-

play.

If you select the “FLAT” setting, the fre-

quency response of the device will not

be modified.

103

Download from Www.Somanuals.com. All Manuals Search And Download.

SUBWOOFER AND CENTRE SPEAKER

➮ Press the softkey 5 assigned to

the “CENTRE” display item.

the “HIPASS F” display item in or-

der to set up the high-pass filter for

the front.

➮ Press the joystick 8 left or right to

set the frequency for the centre

speaker.

➮ Press the softkey 5 assigned to

the “HIPASS R” display item in or-

der to set up the high-pass filter for

the rear.

➮ Press the joystick 8 up or down to

set the gain for the centre speaker.

When you have finished making your

changes,

➮ Press the joystick 8 left or right to

set the frequency for the high-pass

filter.

➮ press the joystick OK 8 or the

AUDIO button :.

Setting up the high-pass filter

for the front/rear channels

When you have finished making your

changes,

You can set up a high-pass filter sepa-

rately for the front and rear channels.

The high-pass filter will filter out all of

the frequencies below the frequency

that you set, thus ensuring that the fil-

tered frequencies are only reproduced

by a connected subwoofer.

➮ press the joystick OK 8 or the

AUDIO button :.

If you select the “FLAT” setting, none of

the frequencies will be filtered out thus

ensuring that all of the signals are sent

to the loudspeakers. If you select the

“AUTO” setting, the high-pass filter will

automatically be adjusted to suit the

value that you set for the low-pass filter.

➮ Press the AUDIO button :.

“AUDIO MENU” appears in the display.

➮ Press the NEXT button 4.

“AUDIO MENU 2” appears in the dis-

play.

104

Download from Www.Somanuals.com. All Manuals Search And Download.

AMPLIFIER/SUB-OUT

TMC

TMC for dynamic navigation Amplifier/sub-out

systems

TMC stands for “Traffic Message Chan-

nel”.

The car sound system provides connec-

tions that allow you to connect external

amplifiers. You can also connect a sub-

woofer to the device’s integrated low-

pass filter. In order for this to work, the

amplifier and subwoofer must be con-

nected in the manner described in the

installation instructions. We recommend

you use well-matched products from the

Blaupunkt or Velocity product ranges.

Traffic reports are broadcast digitally

using TMC, which means they can be

used by compatible navigation systems

during route planning. Your car sound

system has a TMC output, which you

can use for connecting Blaupunkt nav-

igation systems. You can find out from

your Blaupunkt dealer which navigation

systems can be used with your car

sound system.

Switching the internal amplifier

on/off

If you use external amplifiers, you can

switch off the device’s internal amplifier

(“INTERNAL AMP OFF” setting).

Note:

➮ Please check this setting if the

loudspeakers do not emit any

sound.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “VARIOUS” display item.

➮ Repeatedly press the softkey 5

assigned to the “AMP ON” display

item until the “INTERNAL AMP ON”

or “INTERNAL AMP OFF” setting

that you want is displayed. The

“AMP ON” softkey will be displayed

with a dark background if the inter-

nal amplifier is switched on.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

The settings are saved.

105

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL AUDIO SOURCES

External audio sources

You can connect up to two external au-

dio sources to the device. Audio sourc-

es can, for example, be portable CD

By pressing the “AUX1” softkey

you can switch between the “AUX-

ILIARY 1 ON” and “AUXILIARY 1

OFF” settings.

➮ Press the softkey 5 assigned to

the “NAV/AUX2” display item if no

navigation system is connected

and you want to connect an exter-

nal audio source. By pressing the

“NAV/AUX2” softkey you can

switch between the “AUXILIARY 2

ON” and “NAVIGATION ON” set-

tings.

players, MiniDisc players or MP3 play-

ers.

You can connect the first external au-

dio source (AUX1) instead of a CD

changer.

You can connect the second external

audio source (AUX2) in addition to the

CD changer or AUX1.

Instead of AUX2, you can connect a

navigation system. For further informa-

tion, please read the section entitled

“Navigation audio” in the “Adjusting the

volume” chapter.

Note:

➮ If a CD changer is connected, you

cannot change the “AUX1” input.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

In order to be able to use the AUX in-

puts, you must activate them in the set-

up menu.

The settings are saved.

If you want to connect an external au-

dio source, you will need an adapter

cable. You can obtain this cable from a

Blaupunkt dealer.

Note:

➮ If the AUX inputs are activated, you

can select them by pressing the

SOURCE button <.

Switching the AUX input on/off

Naming the AUX input

➮ Press the MENU button 9.

You can give each AUX input a name

so you can recognise them more easily

when selecting them using the

SOURCE button < (e.g. you can give

them the device names that they are

connected to).

➮ Press the softkey 5 assigned to

the “AUX” display item.

The AUX menu is displayed.

➮ Press the softkey 5 assigned to

the “AUX1” display item if no CD

changer is connected and you

want to connect an external audio

source.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “AUX” display item.

The AUX menu is displayed.

106

Download from Www.Somanuals.com. All Manuals Search And Download.

EXTERNAL AUDIO SOURCES

POWER-ON MESSAGE

➮ Press the softkey 5 assigned to

the “EDIT” display item under

“AUX1” or “NAV/AUX2”.

Entering the power-on

message

After you switch on your device, the

system displays a scrolling message in

the display. The factory default for this

text is “BLAUPUNKT-THE ADVAN-

TAGE IN YOUR CAR”. Instead of this

you can enter your own text up to 35

characters long.

The default text for the selected input

appears in the display. The text input

marker flashes at the beginning of the

line.

To enter a name,

➮ press the joystick 8 to the left or

right to move the input marker.

➮ Press the MENU button 9.

➮ Enter the letter that you want by

pressing the joystick 8 up or

down.

➮ Press the softkey 5 assigned to

the “VARIOUS” display item.

➮ Press the softkey 5 assigned to

➮ Once you have finished entering

the name, press the joystick OK

8 or the MENU button 9 to close

the menu.

the “ON MSG” display item.

The default text for the power-on mes-

sage appears in the display. The text

input marker flashes at the beginning

of the line.

The settings are saved.

To enter a different text,

➮ press the joystick 8 to the left or

right to move the input marker.

➮ Enter the letter that you want by

pressing the joystick 8 up or

down.

➮ Once you have finished entering

the message, press the joystick

OK 8 or the MENU button 9 to

close the menu.

The settings are saved.

107

Download from Www.Somanuals.com. All Manuals Search And Download.

SERIAL NUMBER

RESETTING

Resetting the device

You can reset the device to its factory

default settings. All custom settings will

then be cleared.

Displaying the serial

number

You can display the device’s serial

number.

➮ Press the MENU button 9.

➮ Press the softkey 5 assigned to

the “VARIOUS” display item.

➮ Press and hold down the softkey

5 assigned to the “NORMSET”

display item for longer than two

seconds.

➮ Press the softkey 5 assigned to

the “SER NUM” display item.

The device’s serial number will be dis-

played in the top line of the display.

The device will switch off and then back

on again automatically.

➮ Press the joystick OK 8 or the

MENU button 9 to close the

menu.

108

Download from Www.Somanuals.com. All Manuals Search And Download.

SPECIFICATIONS

Specifications

Amplifier

Output power:

4 x 18 watts sine

at 14.4 V and 1%

distortion factor at

4 ohms.

4 x 26 watts sine

in accordance

with DIN 45324

at 14.4 V at 4

ohms.

4 x 50 watts max.

power

Tuner

Wavebands:

87.5 - 108 MHz

531 – 1 602 kHz

153 – 279 kHz

5.85 – 6.30 MHz

(49 m band)

FM frequency response:

20 - 16,000 Hz

Frequency response:

15 - 20,000 Hz

Pre-amp out

4 channels:

4 V / < 1 kΩ

1.2 V / 10 kΩ

AUX input

Input sensitivity:

Subject to changes!

109

Download from Www.Somanuals.com. All Manuals Search And Download.

Service-Nummern / Service numbers / Numéros du service après-

vente / Numeri del servizio di assistenza / Servicenummers /

Telefonnummer för service / Números de servicio / Número de

serviço / Servicenumre

Country:

Phone:

Fax:

WWW:

Germany

(D)

0180-5000225

05121-49 4002

http://www.blaupunkt.com

Austria

(A)

(B)

01-610 390

02-525 5444

01-610 393 91

02-525 5263

44-898 644

09-435 99236

01-4010 7320

01-89583 8394

Belgium

Denmark

Finland

France

(DK) 44 898 360

(FIN) 09-435 991

(F)

01-4010 7007

Great Britain (GB) 01-89583 8880

Greece

Ireland

Italy

(GR) 0030-210 94 27 337 0030-210 94 12 711

(IRL) 01-4149400

01-4598830

02-369 62464

40 2085

(I)

02-369 62331

40 4078

Luxembourg (L)

Netherlands (NL) 023-565 6348

023-565 6331

66-817 157

01-2185 11111

916-467952

08-7501810

01-8471650

Norway

Portugal

Spain

(N)

(P)

(E)

(S)

66-817 000

01-2185 00144

902-120234

08-7501500

Sweden

Switzerland (CH) 01-8471644

Czech. Rep. (CZ) 02-6130 0441

02-6130 0514

01-324 8756

022-8771260

Hungary

Poland

(H)

01-333 9575

(PL) 0800-118922

(TR) 0212-3350677

(USA) 800-2662528

Turkey

USA

0212-3460040

708-6817188

Brasil

(Mercosur)

(BR) +55-19 3745 2769 +55-19 3745 2773

Malaysia

(Asia Pacific) (MAL) +604-6382 474

+604-6413 640

Blaupunkt GmbH

12/03 TRO

CM/PSS 8 622 403 905

Download from Www.Somanuals.com. All Manuals Search And Download.

Billy Goat Lawn Mower HW651SP User Manual
Black Box Projection Television AC400A User Manual
BMW Automobile 1985 bmw 635csi User Manual
Briggs Stratton Air Cleaner 28W700 User Manual
Briggs Stratton Portable Generator 030244 02 User Manual
Bush Hog Compact Loader FC 0014 User Manual
Califone Headphones 1218AV 03 User Manual
Campbell Hausfeld Impact Driver RX9102 User Manual
Carrier Air Conditioner 90MA MF MU User Manual
Casablanca Fan Company Outdoor Ceiling Fan 38DHxxT User Manual