LCD Monitor
User Manual
GL940M/GL940AM
GL941M/GL941AM
GL2040M/GL2040AM
GL2240M/GL2240AM
Welcome
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Back view .........................................................................................................................................6
How to assemble your monitor hardware ...................................................................... 7
Getting the most from your BenQ monitor ................................................................. 11
How to upgrade the monitor on an existing computer ..............................................................13
Picture optimization ...................................................................................................... 17
The control panel ..........................................................................................................................18
Hot key mode ................................................................................................................................19
Troubleshooting ............................................................................................................. 33
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Getting started
When unpacking please check you have the following items. If any are missing or damaged, please
contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Base
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product
supplied for your region.)
Video Cable: D-Sub
4
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Cable: DVI-D
(Optional accessory for models with
DVI inputs, sold separately)
Audio Cable
Consider keeping the box and packaging in storage for use in the future when you may need to transport
the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Getting started
5
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Getting to know your monitor
Front view
1. Speakers
2. Power button
3. Control buttons
3
2
1
1
Back view
4. AC Power Input jack
5. Line In
6. Headphone jack
7. DVI-D socket (Analog-only models do not
have the DVI-D input socket)
8. D-Sub socket
9. Lock switch
4
5 6
7
8
9
• Above diagram may vary depending on the model.
• Picture may differ from product supplied for your region.
6
Getting to know your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
3. How to assemble your monitor hardware
If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
1. Attach the monitor base.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like the monitor
packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded
surface.
While holding the monitor firmly against the desk, pull
the monitor stand arm upwards clear of the monitor.
Orient and align the stand base socket with the end of the
stand arm, then push them together until they click and
lock into place.
Gently attempt to pull them back apart to check that they
have properly engaged.
Carefully lift the monitor, turn it over and place it upright
on its stand on a flat even surface.
O
-5
O
~ +20
You should position the monitor and angle the screen to
minimize unwanted reflections from other light sources.
How to assemble your monitor hardware
7
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Connect the PC video cable
Either
Do not use both DVI-D cable and D-Sub cable on the
same PC. The only case in which both cables can be
used is if they are connected to two different PCs with
appropriate video systems. (Not available for analog-only
models).
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
To Connect the DVI-D Cable
Or
Connect the plug of the DVI-D cable (at the end without
the ferrite filter) to the monitor video socket. Connect the
other end of the cable (at the end with the ferrite filter) to
the computer video socket.
Tighten all finger screws to prevent the plugs from
accidently falling out during use.
The DVI-D format is used for direct digital connection
between source video and digital LCD monitors or
projectors. The digital video signals produce a superior
quality picture than analog video signals.
The video cable included in your package and the socket
illustrations on the right may vary depending on the LCD
model.
3. Connect the audio cable.
Connect the audio cable between the socket on the rear of
the monitor (Line In) and your computer audio outlet.
You may connect headphones to the headphone jack
found next to the Line In jack of the monitor.
8
How to assemble your monitor hardware
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled
‘POWER IN’ on the rear of the monitor. Do not connect
the other end to a power outlet just yet.
5. Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet
and turn it on.
Picture may differ from product supplied for your region.
Turn on the monitor by pressing the power button on the
right of the monitor.
Turn on the computer too, and follow the instructions in
Section 4: Getting the most from your BenQ monitor on
page 11 to install the monitor software.
How to assemble your monitor hardware
9
Download from Www.Somanuals.com. All Manuals Search And Download.
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging the
power cable. Turn off the computer before unplugging the
monitor signal cable.
Protect the monitor and screen by clearing a flat open area
on your desk and placing a soft item like a towel on the
desk for padding, before laying the screen face down on a
flat clean padded surface.
Please be careful to prevent damage to the monitor.
Placing the screen surface on an object like a stapler or a
mouse will crack the glass or damage the LCD substrate
voiding your warranty. Sliding or scraping the monitor
around on your desk will scratch or damage the monitor
surround and controls.
2. Press the locking clips to detach the monitor base
from the monitor stand arm.
10
How to assemble your monitor hardware
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Getting the most from your BenQ monitor
To gain the most benefit from your new BenQ color LCD flat screen monitor, you should install
the custom BenQ LCD Monitor driver software as provided on the BenQ LCD Monitor CD-ROM.
The circumstances under which you connect and install your BenQ LCD Monitor will determine
which process you need to follow to successfully install the BenQ LCD Monitor driver software.
These circumstances relate to which version of Microsoft Windows you are using, and whether
you are connecting the monitor and installing the software onto a new computer (without existing
monitor driver software), or whether you are upgrading an existing installation (which already has
existing monitor driver software) with a newer monitor.
In either case however, the very next time you turn on your computer (after connecting the
monitor to your computer), Windows will automatically recognize the new (or different)
hardware, and will launch its Found New Hardware wizard.
Follow the wizard instructions until it asks you to select a monitor model. At that point, click the
Have Disk button, insert the BenQ LCD Monitor CD-ROM and select the appropriate monitor
model. Further details and step-by-step instructions for either an automatic (new) or upgrade
(existing) installation, see:
• If you require a User Name and Password to login to your Windows computer, you must be logged
on as an Administrator or as a member of the Administrators group in order to install the monitor
driver software. Furthermore, if your computer is connected to a network which has security access
requirements, network policy settings may prevent you from installing software on your computer.
• To check the name of the purchased model, refer to the specification label on the back of the
monitor.
Getting the most from your BenQ monitor
11
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install the monitor on a new computer
This instruction details the procedure for selecting and installing the BenQ LCD Monitor driver
software on a new computer which has never had a monitor driver installed before. This
instruction is only suitable for a computer which has never been used before, and for which the
BenQ LCD Monitor is the first ever monitor to be connected to it.
If you are adding the BenQ LCD Monitor to an existing computer that has already had another monitor
connected to it (and has monitor driver software installed), you should not be following these instructions.
You should instead be following the instructions for How to upgrade the monitor on an existing computer.
When Windows starts, it will automatically detect the new monitor and launch the Found New
Hardware Wizard. Follow the prompts until it displays the option to Install Hardware Device
Drivers.
2. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
3. Check Search for a suitable driver for my device option, and click Next.
4. Check the option for CD-ROM drives (uncheck all others) and click Next.
5. Look to confirm that the wizard has selected the correct name of your monitor and click
Next.
6. Click Finish.
7. Restart the computer.
To find the suitable driver files for the purchased model, refer to the following table.
Driver files
Suitable models
GL940
GL940, GL940M
GL940A
GL941
GL940A, GL940AM
GL941, GL941M
GL941A
GL2040
GL2040A
GL2240
GL2240A
GL941A, GL941AM
GL2040, GL2040M
GL2040A, GL2040AM
GL2240, GL2240M
GL2240A, GL2240AM
12
Getting the most from your BenQ monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
How to upgrade the monitor on an existing computer
This instruction details the procedure for manually updating the existing monitor driver software
on your Microsoft Windows computer. It is currently tested as compatible for Windows XP,
Windows Vista, and Windows 7 Operating System (OS).
The BenQ LCD Monitor driver for your model may well function perfectly with other versions of Windows,
however, as at the time of writing, BenQ has done no testing of this driver on other versions of Windows
and cannot guarantee its operation on those systems.
Installing monitor driver software involves selecting an appropriate information file (.inf) on the
BenQ LCD Monitor CD-ROM for the particular model monitor you have connected, and letting
Windows install the corresponding driver files from the CD. You need only steer it in the right
direction. Windows has an Upgrade Device Driver Wizard to automate the task and guide you
through the file selection and installation process.
See:
Getting the most from your BenQ monitor
13
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install on Windows 7 system
1. Open Display Properties.
Go to Start, Control Panel, Hardware and Sound, Devices and Printers and right-click the
name of your monitor from the menu.
Alternatively, right-click the desktop and select Personalize, Display, Devices and Printers, and
right-click the name of your monitor from the menu.
2. Click the Hardware tab.
3. Click Generic PnP Monitor, and then the Properties button.
4. Click the Driver tab and the Update Driver button.
5. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
6. In the Update Driver Software window, select the option Browse my computer for driver
software.
7. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the
drive letter designator for the CD-ROM drive).
The drive letter for your CD drive may differ from the example above depending upon your system - it may
be 'D:' or 'E:' or 'F:' etc.
8. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
9. Click Close.
You may be prompted to restart your computer after the driver update is complete.
14
Getting the most from your BenQ monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install on Windows Vista systems
1. Open Display Settings.
Right-click the desktop and select Personalize from the popup menu.
Select Display Settings from the Personalize appearance and sounds window.
The Display Settings window will display.
2. Click the Advanced Settings button.
The Generic PnP Monitor Properties window will display.
3. Click the Monitor tab and the Properties button.
4. Click Continue in the prompted User Account Control window.
5. Click the Driver tab and the Update Driver button.
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer.
7. In the Update Driver Software window, select the option Browse my computer for driver
software.
8. Click Browse and navigate to the following directory: d:\BenQ_LCD\Driver\ (where d is the
drive letter designator for the CD-ROM drive).
The drive letter for your CD drive may differ from the example above depending upon your system – it may
be ‘D:’ or ‘E:’ or ‘F:’ etc.
9. Select the correct folder name of your monitor from provided driver list, and click Next.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Close.
You may be prompted to restart your computer after the driver update is complete.
Getting the most from your BenQ monitor
15
Download from Www.Somanuals.com. All Manuals Search And Download.
How to install on Windows XP system
1. Open Display Properties.
The quickest shortcut to Display Properties is through the Windows desktop.
Right-click the desktop and select Properties from the popup menu.
Alternatively, the Windows menu to Display Properties is located in Control Panel.
In Windows XP version, Control Panel is located directly under the main Start menu item.
The menu options displayed will depend upon which type of view is selected for your system.
•
•
Under the Classic view, click Start | Control Panel | Display.
Under the Category view, click Start | Control Panel | Appearance and Themes | Change
the screen resolution.
The Display Properties window will display.
2. Click the Settings tab and the Advanced button.
The Advanced Display Properties window will display.
3. Click the Monitor tab and select the Plug and Play Monitor from the list.
If there is only one monitor in the list, it will already be selected for you.
4. Click the Properties button.
The Monitor Properties window will display.
If the driver provider is listed as BenQ, and the model matches that of your new monitor, the proper
drivers are already installed, and you need do nothing further. Cancel out of these property windows.
However, if BenQ is not listed as the manufacturer, or the correct model is not currently shown, you
will need to continue with these instructions.
5. Click the Driver tab and the Update Driver button.
The Hardware Update Wizard will display. Follow the wizard instructions noting the steps below:
6. Insert the BenQ LCD Monitor CD-ROM into a CD drive on the computer you attached the
monitor to.
7. Check the option Install from a list or specific location and click Next.
8. Check the option Search for the best driver in these locations and also check Search
removable media, then click Next.
Please wait while the wizard searches for drives and the BenQ LCD Monitor CD inserted in step 6.
When completes, the wizard should have found and selected the BenQ driver on the CD appropriate to
your monitor model.
9. Select (single-click) the correct name of your monitor from provided driver list on the CD,
and click the Next button.
This will copy and install the appropriate monitor driver files to your computer.
10. Click Finish.
This will close the wizard and return you to the Monitor Properties window.
11. Click Close, OK, and OK.
This will close the Display Properties windows. You may be prompted to restart your computer
after the driver update is complete.
16
Getting the most from your BenQ monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Picture optimization
The easiest way to obtain an optimal display from an analog (D-Sub) input is to use the AUTO key
function. Press the AUTO key to optimize the currently displayed image to the screen.
When you connect a digital video output using a digital (DVI) cable to your monitor, the AUTO
key and the Auto Adjustment function will be disabled, because the monitor will automatically
display the best image.
Please ensure that the connected graphic card on your computer is set to the native resolution of the
monitor when you use the AUTO key function.
If you wish, you can always adjust the screen geometric settings manually using geometry menu
items. To assist you in this endeavour, BenQ has provided a screen test image utility which you can
use to check for screen color, grayscale and line gradient display.
1. Run the test program auto.exe from CD-ROM. You could also use any other image, such as
the desktop of your operating system. However, we recommend that you use auto.exe. As you
run auto.exe, a test pattern displays.
2. Press the AUTO key on the monitor.
3. Press the MENU key to access the monitor On-Screen Display (OSD) menu.
4. Use the
or
keys to select DISPLAY and press the ENTER key to enter the menu.
5. If you notice a vertical noise (like a curtain effect-shimmering of vertical lines), press the
or keys to select Pixel Clock and press the ENTER key. Then press the or keys to
adjust the monitor until the noise disappears.
6. If you notice a horizontal noise, press the
or
keys to select Phase and press the
ENTER key. Then press the
or
keys to adjust the monitor until the noise disappears.
Picture optimization
17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. How to adjust your monitor
The control panel
1
2
3
4
5
6
1. AUTO: Adjusts vertical position, phase, horizontal position and pixel clock automatically.
2. MENU key: Activates OSD main menu and return to the previous menu or exit OSD.
3.
4.
/Volume key: For Up/Increase adjustment. The key is the hot key for Volume.
/Mode key: For Down/Decrease adjustment. The key is the hot key for Mode.
5. ENTER key: Enters sub menus and select items. For models with DVI inputs, this key is also
the hot key for Input.
6. Power: Turns the power on or off.
OSD = On Screen Display.
The hot keys will display a graduated scale for adjusting the value of that setting, and will only operate
while the OSD menu is not currently displaying. Hot key displays will disappear after a few seconds of no
18
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Hot key mode
The monitor keys perform as hot keys to provide direct access to particular functions whenever
the menu isn't currently displaying on-screen.
Volume hot key
Press the
key to display the Volume
indicators. Further press the
key will
key will
increase the volume, while the
decrease the volume.
To Mute, press the Volume hot key for 3
seconds. To release Mute, press the Volume
hot key for 3 more seconds.
Mode hot key
Press the
key continually to switch
between the 6 modes for the main window,
including Standard, Movie, Game, Photo,
sRGB, and Eco. The setting will take effect
immediately.
Input hot key (not available for analog-only models)
Press the ENTER key to toggle between
different PC video signal inputs that may be
connected to your monitor.
The setting will take effect immediately.
How to adjust your monitor
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Main menu mode
You can use the OSD (On Screen Display) menu to adjust all the settings on your monitor.
Press the MENU key to display the following main OSD menu.
There are five main OSD menus:
1
2
3
4
5
1. Display
2. Picture
MODE: Standard
DISPLAY
3. Picture Advanced
4. Audio
Auto Adjustment
H. Position
V. Position
Pixel Clock
Phase
10
12
1
5. System
12
Use the
(up) or
(down) keys to
ENTER
MENU
Move
Select
Exit
highlight a menu item, and press the
ENTER key to enter the Menu item settings.
The OSD menu languages may differ from the product supplied to your region, see “Language on page
31” under “OSD Settings” for more details.
For more information on each menu, please refer to the following pages:
20
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Display menu
1. Press the MENU key to display the main
menu.
2. Press the
or
keys to select
MODE: Standard
DISPLAY
DISPLAY and then press the ENTER key
Auto Adjustment
H. Position
V. Position
Pixel Clock
Phase
to enter the menu.
10
12
1
3. Press the
or
keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
12
ENTER
MENU
4. Press the
or
keys to make
Move
Select
Exit
adjustments or selections.
5. To return to the previous menu, press the
MENU button.
Item
Function
Operation
Range
Auto
Adjustment
Optimizes and adjusts the Press the ENTER key to
screen settings select this option and make
automatically for you. The adjustment.
AUTO key is a ‘hot key’ for
this function.
When you connect a
digital video output
using a digital (DVI)
cable to your monitor,
the AUTO key and the
Auto Adjustment
function will be disabled.
How to adjust your monitor
21
Download from Www.Somanuals.com. All Manuals Search And Download.
H. Position
V. Position
Pixel Clock
Adjusts the horizontal
position of the screen
image.
0 to 100
0 to 100
0 to 100
Press the
adjust the value.
or
keys to
Adjusts the vertical
position of the screen
image.
Adjusts the pixel clock
frequency timing to
synchronize with the
analog input video signal.
Not applicable to a digital
input signal.
See also: Picture
Phase
Adjusts the pixel clock
phase timing to
0 to 63
synchronize with the
analog input video signal.
Not applicable to a digital
input signal.
See also: Picture
22
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture menu
1. Press the MENU key to display the main
menu.
2. Press the
or
keys to select
MODE: Standard
PICTURE
PICTURE and then press the ENTER key
Brightness
Contrast
Sharpness
Gamma
12
10
1
to enter the menu.
3. Press the
or
keys to move the
2.2
highlight to a menu item and then press
Color
the ENTER key to select that item.
4. Press the
or
keys to make
ENTER
MENU
Move
Select
Back
adjustments or selections.
5. To return to the previous menu, press the
MENU button.
Item
Function
Adjusts the balance
between light and dark
shades.
Operation
Range
Brightness
0 to 100
Press the
key to
increase the brightness
and press the key to
decrease the brightness.
Press the key to
increase the contrast and
press the key to
decrease the contrast.
Press the key to
Contrast
Adjusts the degree of
difference between
darkness and lightness.
0 to 100
1 to 5
Sharpness
Adjusts the clarity and
visibility of the edges of
the subjects in the image.
improve the crispness of
the display and press the
key to have softness
effect on the display.
The above options for Brightness, Contrast, and Sharpness are available only in the Standard
mode.
Gamma
Adjusts the tone
1.8 ~ 2.6
Press the
increase the gamma value
(tone becomes darker)
key to
(available when
the Picture Mode
is set to Standard
or Eco)
luminance. The default
value is 2.2 (the standard
value for Windows).
and press the
key to
decrease the gamma value
(tone becomes lighter).
How to adjust your monitor
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Color - Press ENTER to enter the Color menu
This Color menu is available only in the Standard mode.
Normal
Allows video and still
photographs to be viewed
with natural coloring.
This is the factory default
color.
Press the
to select this option.
or
keys
Bluish
Applies a cool tint to the
image and is factory
pre-set to the PC industry
standard white color.
Reddish
User Mode
Applies a warm tint to the
image and is factory
pre-set to the news print
standard white color.
Tailors the image color
tint. The blend of the Red,
Green and Blue primary
colors can be altered to
change the color tint of
the image.
Decreasing one or more
of the colors will reduce
their respective influence
on the color tint of the
image. (e.g. if you reduce
the Blue level the image
will gradually take on a
yellowish tint. If you
reduce Green, the image
will become a magenta
tint.)
• Red
(0 to 100)
Press the
and the ENTER key to
select Red, Green, or
or
keys
• Green
(0 to 100)
Blue. Then use the
or
• Blue
(0 to 100)
keys to make the color
adjustments.
Hue: Adjusts the degree of
how we perceive colors.
0 to 100
0 to 100
Press the
to adjust the value.
or
keys
keys
Saturation: Adjusts the
purity degree of colors.
Press the or
to adjust the value.
The above options for Hue and Saturation are available only if the signal
source is Component Video.
Reset Color
Resets the User Mode
custom color settings to
the factory defaults.
• YES
• NO
Press the
to change the settings.
or
keys
Press MENU to leave the Color menu.
24
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Advanced menu
1. Press the MENU key to display the main
menu.
2. Press the
or
keys to select
PICTURE ADVANCED and then press the
ENTER key to enter the menu.
MODE: Standard
PICTURE ADVANCED
Picture Mode
Standard
OFF
Senseye Demo
Dynamic Contrast
Display Mode
Color Format
3. Press the
or
keys to move the
5
highlight to a menu item and then press
the ENTER key to select that item.
YUV
4. Press the
or
keys to make
ENTER
MENU
Move
Select
Exit
adjustments or selections.
5. To return to the previous menu, press the
MENU button.
Item
Picture Mode
Function
Operation
Press the
Range
• Standard
Selects a picture mode that
best suits the type of
images shown on the
screen.
or
keys
• Movie
• Game
• Photo
• sRGB
• Eco
to change the settings.
• Standard - for basic PC
application.
• Movie - for viewing
videos.
• Game - for playing video
games.
• Photo - for viewing still
images.
• sRGB - for better color
matching representation
with the peripheral
devices, such as printers,
DSCs, etc.
• Eco - for saving
electricity with low
power consumption by
providing minimum
brightness for all
running programs.
How to adjust your monitor
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Senseye Demo Displays the preview of
• ON
Press the
to change the settings.
or
keys
(available
screen images under the
selected mode from
• OFF
when the
Picture Mode
Picture Mode. The screen
is set to Movie, will be divided into two
Game, or
Photo)
windows; the left window
demonstrates images of
Standard mode, while the
right window presents the
images under the specified
mode.
Dynamic
Contrast
(available
when the
Picture Mode
The function is to
Press the ENTER key to
select this option. Press
0 to 5
automatically detect the
distribution of an input
visual signal, and then to
create the optimal
the
or
keys to
change the settings.
is set to Movie, contrast.
Game, or
Photo)
26
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Display Mode This feature is provided to
allow aspect ratios other
than 16:9 or 16:10
When the signal
source is from a
DVI or D-Sub
source, and the
input image is of
non-wide aspect
ratio:
Press the
to change the settings.
or
keys
(depending on the
purchased model) to be
displayed without
The options under
Display Mode will be
different depending on
the input signal
geometric distortion.
sources.
• Overscan - Slightly
enlarges the input image.
Use this feature to hide
annoying edge noise if
present around your
image.
• Full
• Aspect
Or
When the signal
source is from a
D-Sub (VGA
converted from
Component)
source:
• Full - Scales the input
image to fill the screen.
Ideal for 16:9 or 16:10
(depending on the
purchased model) aspect
images.
• Overscan
• Full
• Aspect - The input image
is displayed without
geometric distortion
filling as much of the
display as possible.
Depending on the
• Aspect
purchased model, 16:9
or 16:10 images will fill
the screen horizontally
while 4:3 or 5:4 images
will fill the screen
vertically.
To find out the monitor
aspect ratio of the
purchased model,
please check the
Specification document
on the provided CD.
How to adjust your monitor
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Color Format
Determines the color space Press the ENTER key to
• RGB
• YUV
(RGB or YUV) based on
the following detected
video signal:
select this option. Press
the or keys to
change the settings.
• D-Sub (VGA) from PC:
The default Color
Format is RGB.
• D-Sub (Component)
from a video device: The
default Color Format is
YUV.
You might need to
manually set the Color
Format if colors shown
on the monitor screen
do not display properly.
• DVI (for models with
DVI inputs): Color
Format is automatically
set to RGB.
28
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio menu
1. Press the MENU key to display the main
menu.
2. Press the
or
keys to select AUDIO
MODE: Standard
AUDIO
and then press the ENTER key to enter
the menu.
Volume
Mute
10
OFF
3. Press the
or
keys to move the
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the
or
keys to make
MENU
Move
Back
adjustments or selections.
5. To return to the previous menu, press the
MENU button.
Item
Volume
Function
Adjusts the audio volume
Operation
Press the
Range
0 ~ 100
key to increase
the volume and press the
key to decrease the
volume.
Mute
Mutes the audio input
• ON
Press the
or
keys to
• OFF
change the settings.
How to adjust your monitor
29
Download from Www.Somanuals.com. All Manuals Search And Download.
System menu
1. Press the MENU key to display the main
menu.
2. Press the
or
keys to select SYSTEM
MODE: Standard
SYSTEM
and then press the ENTER key to enter the
Input
D-sub
menu.
OSD Settings
DDC/CI
3. Press the
or
keys to move the
Auto Power off
Information
Reset All
OFF
highlight to a menu item and then press
the ENTER key to select that item.
4. Press the
or
keys to make
MENU
Move
Back
adjustments or selections.
5. To return to the previous menu, press the
MENU button.
Item
Input
Function
Operation
Press the
Range
• DVI
Use this to change the
input to that appropriate
to your video cable
connection type.
or
change the settings.
keys to
• D-Sub (VGA)
Analog-only models do
not have the Input
function.
30
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Settings - Press ENTER to enter the OSD Settings menu.
Language
Sets the OSD menu
language.
• English
• French
• German
• Italian
• Spanish
• Polish
Press the
change the settings.
or
keys to
The language options
displayed on your OSD
may differ from those
shown on the right,
depending on the product
supplied in your region.
• Japanese
• Czech
• Traditional
Chinese
• Hungarian
• Simplified
Chinese
• Serbo-Croatian
• Romanian
• Dutch
• Russian
• Swedish
• Portuguese
H. Position
V. Position
Display Time
Adjusts the horizontal
position of the OSD menu.
0 to 100
Press the
change the settings.
or
keys to
Adjusts the vertical
position of the OSD menu.
0 to 100
Adjusts the display time of
the OSD menu.
• 5 Sec.
• 10 Sec.
• 15 Sec.
• 20 Sec.
• 25 Sec.
• 30 Sec.
How to adjust your monitor
31
Download from Www.Somanuals.com. All Manuals Search And Download.
OSD Lock
Prevents all the monitor
settings from being
accidentally changed.
When this function is
activated, the OSD
controls and hotkey
operations will be
disabled.
• YES
• NO
Press the
change the settings.
or
keys to
To unlock the OSD
controls when the OSD is
preset to be locked, press
and hold the "MENU" key
for 15 seconds to enter
the "OSD Lock" option
and make changes.
Alternatively, you may
use the
or
keys to
select "NO" in the "OSD
Lock" submenu from the
"OSD Settings" menu,
and all OSD controls will
be accessible.
Press MENU to leave the OSD Settings menu.
DDC/CI*
Allows the monitor
Press the ENTER key to
• ON
settings to be set through
the software on the PC.
select this option. Press the
• OFF
or
keys to change
the settings.
Auto Power off Sets the time to power off
Press the ENTER key to
• OFF
the monitor automatically select this option. Press the
in power saving mode.
• 10min.
• 20min.
or
keys to change
the settings.
• 30min.
• Input
Information
Displays the current
monitor property settings.
• Current
Resolution
• Optimum
Resolution
(best with the
monitor)
• Model Name
• YES
Reset All
Resets all mode, color and
geometry settings to the
factory default values.
Press the
change the settings.
or
keys to
• NO
*DDC/CI, short for Display Data Channel/Command Interface, which was developed by Video Electronics
Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via the software for
remote diagnostics.
32
How to adjust your monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Troubleshooting
Frequently asked questions (FAQ)
The image is blurred:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the
correct resolution, refresh rate and make adjustments based on these instructions.
How do you use a VGA extension cable?
Remove the extension cable for the test. Is the image now in focus? If not, optimize the image by
working through the instructions in the "Adjusting the refresh rate" section on the link "Adjusting
the Screen Resolution". It is normal for blurring to occur due to conduction losses in extension
cables. You can minimize these losses by using an extension cable with better conduction quality
or with a built-in booster.
Does the blurring only occur at resolutions lower than the native (maximum) resolution?
Read the instructions on the link "Adjusting the Screen Resolution" on the CD. Select the native
resolution.
Pixel errors can be seen:
One of several pixels is permanently black, one or more pixels are permanently white, one or more
pixels are permanently red, green, blue or another color.
• Clean the LCD screen.
• Cycle power on-off.
• These are pixels that are permanently on or off and is a natural defect that occurs in LCD
technology.
The image has a faulty coloration:
It has a yellow, blue or pink appearance.
Select MENU > PICTURE > Color > Reset Color, and then choose “YES” in the “Caution”
message box to reset the color settings to the factory defaults.
If the image is still not correct and the OSD also has faulty coloration, this means one of the three
primary colors is missing in the signal input. Now check the signal cable connectors. If any pin is
bent or broken off, please contact your dealer to get necessary support.
No image can be seen:
Is the prompt on the display illuminated in green?
If the LED is illuminated in green and there is a message “Out of Range” on the screen, this means
you are using a display mode that this monitor does not support, please change the setting to one
of the supported mode. Please read the “Preset display modes” section from the link "Adjusting
the Screen Resolution".
Faint shadow from the static image displayed is visible on the screen:
• Activate the power management function to let your computer and monitor go into a low
power "sleep" mode when not actively in use.
• Use a screensaver to prevent the occurrence of image retention.
Troubleshooting
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Is the prompt on the display illuminated in orange?
If the LED is illuminated in orange, the power management mode is active. Press any button on
the computer keyboard or move the mouse. If that does not help, check the signal cable
connectors. If any pin is bent or broken off, please contact your dealer to get necessary support.
Is the prompt on the display not illuminated at all?
Check the power supply mains socket, the external power supply and the mains switch.
The image is distorted, flashes or flickers:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the
correct resolution, refresh rate and make adjustments based on these instructions.
You are running the monitor at its native resolution, but the image is still distorted.
Images from different input sources may appear distorted or stretched on the monitor running at
its native resolution. To have the optimal display performance of each type of input sources, you
can use the "Display Mode" function to set a proper aspect ratio for the input sources. See Display
Mode on page 27 for details.
The image is displaced in one direction:
Read the instructions on the link "Adjusting the Screen Resolution" on the CD, and then select the
correct resolution, refresh rate and make adjustments based on these instructions.
The OSD controls are inaccessible:
• To unlock the OSD controls when the OSD is preset to be locked, press and hold the “MENU”
key for 15 seconds to enter the “OSD Lock” option and make changes.
• Alternatively, you may use the
or
keys to select “NO” in the “OSD Lock” submenu
from the “OSD Settings” menu (under SYSTEM), and all OSD controls will be accessible.
No sound can be heard from the built-in speakers:
• Check whether Line In is properly connected.
• Increase the volume (volume may be muted or too low).
• Remove your headphone and/or external speakers. (If they are connected to the monitor, the
built-in speakers are automatically muted.)
No sound can be heard from the connected external speakers:
• Remove your headphone (if the headphone is connected to the monitor).
• Check whether the headphone jack is properly connected.
• If the external speakers are USB-powered, check whether the USB connection is OK.
• Increase the volume (volume may be muted or too low) on the external speakers.
Need more help?
If your problems remain after checking this manual, please contact your place of purchase or
e-mail us at: [email protected].
34
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
|