®
OmniView Secure DVI
Dual-Link KVM Switch
Belkin Tech Support
Belkin Ltd.
US: 800-282-2355
4 Pioneer Avenue
310-898-1100, ext. 2263
UK: 0845 607 77 87
Australia: 1800 235 546
New Zealand: 0800 235 546
Singapore: 65 64857620
Tuggerah Business Park
Tuggerah, NSW 2259, Australia
+61 (0) 2 4350 4600
+61 (0) 2 4350 4700 fax
Belkin B.V.
Boeing Avenue 333
Belkin International, Inc.
501 West Walnut Street
Los Angeles, CA 90220, USA
310-898-1100
1119 PH Schiphol-Rijk, The Netherlands
+31 (0) 20 654 7300
+31 (0) 20 654 7349 fax
310-898-1111 fax
Belkin Ltd.
Express Business Park, Shipton Way
Rushden, NN10 6GL, United Kingdom
+44 (0) 1933 35 2000
+44 (0) 1933 31 2000 fax
© 2008 Belkin International, Inc. All rights reserved. All trade names are registered trademarks
of respective manufacturers listed. Windows, Windows Vista, Microsoft, and IntelliMouse are
either registered trademarks or trademarks of Microsoft Corporation in the United States and/
or other countries. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and
other countries.
PM00507
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1. Introduction.............................................................................................1
Package Contents ........................................................................... 1
2. Overview .................................................................................................2
Security Features............................................................................. 2
Other Features ................................................................................ 3
Equipment Requirements ................................................................. 4
System Requirements ...................................................................... 5
Unit Display Diagrams ..................................................................... 6
Specifications.................................................................................. 7
3. Installation..............................................................................................8
Pre-Configuration ............................................................................ 8
Mounting the Switch (optional)......................................................... 9
Connecting the Console to the Switch ............................................10
Connecting Computers to the Switch ..............................................11
Powering Up the Systems...............................................................12
4. Using your Switch..................................................................................13
Selecting a Computer Using Port Selectors.....................................13
5. Frequently Asked Questions ..................................................................14
6. Troubleshooting ....................................................................................16
7. Information ...........................................................................................18
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations and thank you for purchasing this Belkin OmniView Secure
DVI Dual-Link KVM Switch (the Switch). Designed especially for secure military
and government installations, the Switch provides the centralized control
required by today’s IA (Information Assurance) computer environments. It
allows users to manage multiple computers from a single USB console, while
preventing unintended data transfer between computers running on different
security levels.
1
2
3
4
5
6
7
This User Manual provides all the details you’ll need to install and operate
your new Switch, in addition to expert troubleshooting advice—in the unlikely
event of a problem. For quick and easy installation, please refer to the Quick
Installation Guide included in your packaging.
Package Contents
5V DC, 3A Global
Power Adapter
4 Interchangeable
OmniView Secure
DVI Dual-Link
KVM Switch
1
AC Plugs
User Manual
Quick
Installation Guide
1
Includes AC plugs for the U.S., U.K., Europe, and Australia.
Important: Tamper-evident seals have been placed on both sides of the
Switch enclosure, to provide evidence if the product has been opened and
potentially compromised (see diagram on page 6). If either seal has been
removed or appears disrupted, please call Belkin Technical Support at
(800) 282-2355.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Security Features
• Dedicated Processors
Designed specifically for secure environments, the Switch features a
dedicated processor per computer port. This keeps each computer running
on different security levels completely separated and secure at all times, and
prevents any unintended data transfer between computers.
• No Memory Buffer
The Switch does not have a memory buffer and does not have the ability
to store data. This prevents any keystrokes or other data input from being
unintentionally transferred as you switch between computers, ensuring the
integrity of your data. The Switch does not include any features that require
memory, such as hot keys, AutoScan, or an on-screen display (OSD).
• Non-Reprogrammable Firmware
The Switch features custom firmware that is not reprogrammable, preventing
the ability to tamper with the KVM logic.
• Tamper-Evident Seals
Tamper-evident seals are placed on both sides of the enclosure, to provide
indication if the Switch has been opened or compromised.
• Tamper-Proof Hardware
All integrated circuits are soldered directly to the printed circuit board to
prevent tampering with the components.
• NIAP Listing
The Switch is listed by the National Information Assurance Partnership (NIAP).
It is NIAP Common Criteria validated to EAL 4 (Evaluation Assurance Level 4)
augmented with ALC FLR 3.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Other Features
1
2
3
4
5
6
7
• USB Support
The Switch is compatible with USB 1.1 and USB 2.0 technology and supports
Plug-and-Play connectivity with USB computers, keyboards, and mice.
• Dual-Link DVI Support
The Switch supports video resolutions of up to 2560x1600. This includes
support for digital displays 20 inches and larger.
• Audio Switching
Allows you to share speakers and microphone between computers.
• Dedicated Port Selectors
Port selectors, located conveniently on the front panel of the Switch, allow you
to switch easily from one computer to the next. Each button controls a single
computer port.
• LED Indicators
An LED above each port selector illuminates to indicate that the console
currently controls the corresponding computer. As a port selector is pushed,
the LED above it will illuminate.
• Metal Enclosure
The Switch features a rugged, metal enclosure that provides stability and
allows the Switch to be placed beneath your monitor or other desk item.
• Desktop or Rack-Mount Installation
With its compact design, the Switch can be placed on your desktop or
2
mounted to a standard 19-inch server rack for 1U installation.
• Global Power Adapter
The Switch includes a global power adapter and interchangeable plugs, to
3
allow for both domestic and international installations.
2The 2- and 4-Port Switches require an optional Rack-Mount Kit for rack installation
(Belkin part number F1D005).
3Includes AC plugs for the U.S., U.K., Europe, and Australia.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Equipment Requirements
Cables
Belkin highly recommends you use
Belkin DVI/USB KVM Cable Kits with
Audio & Mic for your Switch to help
ensure superior performance. These
cables offer the highest quality possible
to ensure optimal data and audio video
transmission. One Cable Kit is required
per connected computer.
F1D9201-XX
Belkin DVI/USB KVM Cable Kits
with Audio & Mic:
F1D9201-06 – 6 ft. (1.8m)
F1D9201-10 – 10 ft. (3m)
F1D9201-15 – 15 ft. (4.6m)
F2E0271-SD – DVI-I to DVI-D Adapter
Note: Due to USB and DVI limitations,
the cable length cannot exceed 15
feet (4.6m).
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
System Requirements
1
2
3
4
5
6
7
Operating-System (OS) Platforms
The Switch is compatible with computers running on, but not limited to, the
following OS platforms:
®
• Windows 2000
• Windows XP (Home/Professional)
• Windows 2003 Server
®
• Windows Vista
®
®
• Red Hat Linux Desktop
• Red Hat Enterprise Linux WS
®
• Mac OS X v10.3 and higher
Keyboards
• USB-compatible (including wireless keyboards)
Mice
• USB-compatible (including wireless or optical mice)
Monitors
• Digital displays with DVI-D support, single-link and dual-link
Speakers
• Computer speakers with 3.5mm stereo plug
Microphone
• Computer microphone with 3.5mm plug
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Unit Display Diagrams
Front View
LED Indicators
ꢀꢁ
ꢀꢂ
ꢀꢃ
ꢀꢄ
Port Selectors
Back View
Console Audio/Mic
Input Jacks
Computer DVI, USB,
and Audio/Mic Ports
Console USB
Keyboard Port
Console USB
Mouse Port
DC Power Jack
Console DVI
Monitor Port
Side View
Tamper-Evident Seals
(F1DN104D model shown)
IMPORTANT NOTICE: There should be one tamper-evident seal on
each side of the Switch enclosure (total of two seals). If both seals
are visible and do not appear to be disrupted, your Switch has not
been opened or compromised since time of production. If for any
reason one of the seals is missing or appears disrupted, please call
Belkin Technical Support at (800) 282-2355.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
Specifications
1
2
3
4
5
6
7
Part No.:
F1DN102D, F1DN104D
Enclosure:
Metal enclosure with high-impact plastic faceplate
5V DC, 3A (minimum) power adapter with
Power Requirements:
4
center-pin-positive polarity
AC Input:
100 to 240VAC
Interchangeable AC Plugs:
No. of Users Supported:
4 (U.S., U.K., Europe, Australia)
1
No. of Computers Supported: 2 and 4 respectively for 2- and 4-port models
Monitors Supported:
Resolution Support:
Console Keyboard Input:
Console Mouse Input:
Console Monitor Port:
Console Speaker/Mic:
Single-Link and Dual-Link digital DVI-D displays
Up to 2560x1600
USB Type A
USB Type A
DVI Dual-Link female
3.5mm female
CPU Keyboard/Mouse Ports: USB Type B
CPU Audio/Mic:
CPU Monitor Ports:
Port Selectors:
LED Indicators:
Operating Temp:
Storage Temp:
Humidity:
3.5mm female
DVI Dual-Link female
2 and 4 respectively for 2- and 4-port models
2 and 4 respectively for 2- and 4-port models
32° to 104° F (0° to 40° C)
-4° to 140° F (-20° to 60° C)
0-80% RH, non-condensing
3 years
Warranty:
Dimensions:
(F1DN102D) 11 x 1.75 x 6 in. (279 x 45 x 150mm)
(F1DN104D) 11 x 1.75 x 6 in. (279 x 45 x 150mm)
Weight:
(F1DN102D) 2.5 lbs. (1.1kg.)
(F1DN104D) 2.5 lbs. (1.1kg.)
Made in the USA of imported parts
4The Switch includes a 5-volt, 3-Amp power adapter.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Before you begin, please take a few minutes to register your product.
This may assist Belkin in contacting you regarding important information
regarding secure use of your product. You may register your product online
Pre-Configuration
Where to place the Switch:
The enclosure of the Switch is designed for desktop or rack-mount configuration.
An optional Rack-Mount Kit (Belkin part number F1D005) is available for use with
the 2- and 4-Port Switches.
Consider the following when deciding where to place the Switch:
• your proximity to the port selectors on the front of the Switch
• the lengths of the cables attached to your keyboard, monitor, and mouse
• the location of your computers in relation to your console
• the lengths of the cables you use to connect your computers to the Switch
Warning: Avoid placing cables near fluorescent lights, air-conditioning
equipment, or machines that create electrical noise (e.g., vacuum cleaners).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Step 1 Mounting the Switch (optional)
Bracket Installation (F1DN102D and F1DN104D)
The 2- and 4-Port Switches can be installed into a 19-inch rack using an optional
Rack-Mount Kit, sold separately (Belkin part number F1D005).
1
2
3
4
5
6
7
1.1 Attach the Rack-Mount Bracket to the Switch using the Phillips screws
provided. (Refer to diagram below.)
1.2 Mount the Switch to the rack rails. (Refer to diagram below.)
Your Switch is now mounted securely to the rack and you are ready to
connect your console.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Step 2 Connecting the Console to the Switch (required)
Warning: Before attempting to connect anything to the Switch or your
computers, please ensure that all computer equipment and devices are
powered off. Plugging and unplugging cables while computers are powered
on may cause irreversible damage to the computers and/or the Switch.
Belkin International, Inc., is not responsible for damage caused by your
failure to do so.
Before you connect your console to the Switch, make sure that your USB
keyboard and mouse work properly with all your computers (the Human Interface
Device (HID) USB drivers are installed on all computers).
2.1 Connect your monitor DVI cable to the DVI port on the back of the Switch
in the “User Console” section. (Refer to diagram below.)
2.2 Connect your keyboard and mouse USB cables to the USB keyboard and
mouse ports on the back of the Switch in the “User Console” section.
(Refer to diagram below.)
2.3 Connect your speaker and microphone cables into the corresponding
ports in the “User Console” section.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Step 3 Connecting Computers to the Switch (required)
1
2
3
4
5
6
7
3.1 Make sure all computers and the Switch are powered off.
3.2 Using the Belkin DVI/USB KVM Cable Kit (F1D9201-XX), connect the
male DVI connector to the monitor port on your computer. Then connect
the other end of the cable into an available port on the Switch. (Refer to
diagram below.)
3.3 Using the Cable Kit, connect the USB Type A connector to an available
USB port on your computer. Then connect the USB Type B connector to
the corresponding USB port on the Switch. (Refer to diagram below.)
3.4 Connect the two audio cables (audio and microphone) to your computer.
Then connect the other end to the corresponding audio and microphone
port on the Switch.
3.5 Repeat the steps above for each additional USB computer you wish
to connect.
Note: The Cable Kit must be connected directly to a free USB port on your
computer, with no USB hubs or other devices in between.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation
Step 4 Powering Up the Systems (required)
4.1 Power on the attached monitor.
4.2 Attach the power adapter to the DC power jack labeled “5V, 3A” on the
back of the Switch. Only use the power adapter supplied with the Switch.
(Refer to diagram below.)
4.3 Power on your computers. All computers can be powered
on simultaneously.
Note: Your computers should recognize the Switch and automatically install the
HID USB driver if necessary.
When you power on your computers, the Switch emulates both a
mouse and keyboard on each port and allows your computers to
boot normally. The computer connected to port “1” will be displayed
on the monitor. Check to see that the keyboard, monitor, and mouse
are working normally. Proceed to do this with all occupied ports to
verify that all computers are connected and responding correctly.
If you encounter an error, check your cable connections for that
computer and reboot. If the problem persists, please refer to the
Troubleshooting section in this User Manual.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your Switch
Selecting a Computer Using Port Selectors
1
2
3
4
5
6
7
Now that you have connected your console and computers to the Switch,
it is ready for use. You can select which computer you wish to control by
pressing the corresponding port selector on the front of the Switch. The LED
will illuminate to indicate which computer (or port) is currently selected. It
takes approximately 1–2 seconds for the video signal to refresh after switching
computers. Re-synchronization of the mouse and keyboard signals also
occurs. This is normal operation and ensures that proper synchronization is
5
established between the console and the connected computers.
Once you press a port selector, the Switch immediately disables the connection
between your console and the previously selected computer, and establishes
a new connection between your console and the new computer selected.
Keyboard and mouse inputs can only be sent to the selected computer, and
video outputs can only be received from the selected computer. The Switch also
prevents
any data transfer between connected computers, ensuring the security of
your computers.
Please note that the default port at power-up is port one. In case of
a power failure or if the power is cycled, the Switch will default to
port one.
5
Note: It may take longer for your mouse and keyboard to re-synchronize
when the computer is recovering (or initializing) from Standby, Hibernate, or
Sleep modes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
What does NIAP Common Criteria validation to EAL 4 mean?
To learn more about NIAP Common Criteria and EAL 4, visit
What do I do if I find that the tamper-evident seals on the Switch have
been removed or disrupted?
Please call Belkin Secure KVM Support at (800) 282-2355 immediately.
The KVM Switch’s circuitry may have been compromised.
Where can I register my Switch?
You can register your Switch on the Web by directing your browser to:
Where can I go to report a product issue?
You may call Belkin Secure KVM Support at (800) 282-2355 or direct your web
How does the Switch allow the user to switch between computers?
The Switch only supports one method of port selection. The user can access
the desired computer by pushing the associated port selector.
How far can the Switch be from my computer?
The Switch can be located up to 15 feet (4.6m) away from your computer due
to DVI- and USB-cable limitations.
Do I have to install software to use the Switch?
No, the Switch does not require any software to be installed on your computers.
Can I use the Switch with a computer that does not support USB?
No, the Switch only works with USB-capable computers.
Does the Switch require an AC adapter?
Yes, the Switch requires a 5-volt DC, 3-Amp (minimum) power adapter in order
to function properly.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Frequently Asked Questions
Does the Switch support Linux?
Yes, the Switch works with Red Hat Linux and some Linux operating systems
configured for USB support.
1
2
3
4
5
6
7
®
®
Does the Switch support Microsoft IntelliMouse ?
®
®
The Switch supports mice from Belkin, Microsoft, Logitech , Kensington , and
many other manufacturers. Please contact Belkin Technical Support at (800)
282-2355 for any compatibility issues you may experience.
General
My computer does not boot when connected to the Switch but
works fine when I connect my keyboard, video, and mouse directly
to my computer.
• Make sure that the DVI/USB KVM Cable Kit is connected firmly
between the Switch and the computer.
Video
I am getting ghosting, shadowing, or fuzzy images on my monitor.
• Check that all video cables are inserted properly to the Switch,
computer, and monitor.
• Check that the monitor you are using supports the resolution and
refresh-rate setting on your computer.
• Lower the video resolution of your monitor.
• Check that the video-cable length does not exceed 15 feet (4.6m).
• Check that the graphics card you are using supports the resolution
and refresh-rate setting on your computer.
• Connect the monitor directly into the computer you are having
trouble with to see if the problem still appears.
I am getting a black screen on my monitor.
• Check that all video cables are inserted properly.
• Check that there is proper voltage available to the power adapter
and that it is inserted correctly.
• Connect your monitor directly to the computer to verify that your
monitor is functioning properly.
• Reboot the computer.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Keyboard
The computer does not detect my keyboard, or my keyboard does
not work when I switch computers or reboot.
• Check that the keyboard you are using is connected properly to
the Switch.
• Check that the USB cable between the Switch and the computer is
firmly connected.
• Try connecting to a different USB port on the computer.
• Make sure the keyboard works when directly plugged into the
computer (the HID USB driver is installed on the computer).
Rebooting may be necessary when trying this.
• If you are using keyboard software that was included with your
keyboard, uninstall it and then reinstall.
• If the computer is coming out of standby mode, allow up to one
minute to regain keyboard function.
• Try a different keyboard.
Some of the keys on my keyboard are not functioning properly
®
when I use a Mac computer.
• If you are using a PC keyboard on a Mac system, a few of the option
keys on your PC keyboard may be reversed. All major keys will
function as labeled.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Mouse
1
2
3
4
5
6
7
The computer does not detect my mouse, or my mouse does not
work when I switch computers or reboot.
• Check that the mouse you are using is connected properly to
the Switch.
• Check that the USB cable between the Switch and the computer is
completely connected.
• Try connecting to a different USB port on the computer.
• Make sure the mouse works when directly plugged into the computer
(the HID USB driver is installed on the computer). Rebooting may be
necessary when trying this.
• If you are using a mouse driver that was included with your mouse,
uninstall it and install the standard Microsoft mouse driver.
• If the computer is coming out of standby mode, allow up to one
minute to regain mouse function.
• Try a different mouse.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
FCC Statement
Declaration of Conformity with FCC Rules
for Electromagnetic Compatibility
We, Belkin International, Inc., of 501 West Walnut Street, Compton, CA 90220, declare
under our sole responsibility that the products:
F1DN102D, F1DN104D,
to which this declaration relates:
Comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
CE Declaration of Conformity
We, Belkin International, Inc., declare under our sole responsibility that the products
F1DN102D, F1DN104D, to which this declaration relates, are in conformity with Emissions
Standard EN55022 and with Immunity Standard EN55024, LVP EN61000-3-2, and
EN61000-3-3.
ICES
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique
de la classe B est conforme á la norme NMB-003 du Canada.
Belkin International, Inc., Limited 3-Year Product Warranty
What this warranty covers.
Belkin International, Inc. (“Belkin”) warrants to the original purchaser of this Belkin product
that the product shall be free of defects in design, assembly, material, or workmanship.
What the period of coverage is.
Belkin warrants the Belkin product for three years.
What will we do to correct problems?
Product Warranty.
Belkin will repair or replace, at its option, any defective product free of charge (except
for shipping charges for the product). Belkin reserves the right to discontinue any of its
products without notice, and disclaims any limited warranty to repair or replace any such
discontinued products. In the event that Belkin is unable to repair or replace the product
(for example, because it has been discontinued), Belkin will offer either a refund or a
credit toward the purchase of another product from Belkin.com in an amount equal to the
purchase price of the product as evidenced on the original purchase receipt as discounted
by its natural use.
What is not covered by this warranty?
All above warranties are null and void if the Belkin product is not provided to Belkin
for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin
determines that the Belkin product has been improperly installed, altered in any way,
or tampered with. The Belkin Product Warranty does not protect against acts of God
such as flood, lightning, earthquake, war, vandalism, theft, normal-use wear and tear,
erosion, depletion, obsolescence, abuse, damage due to low voltage disturbances
(i.e., brownouts or sags), non-authorized program, or system-equipment
modification or alteration.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Information
How to get service.
1
2
3
4
5
6
7
To get service for your Belkin product you must take the following steps:
1. Contact Belkin International, Inc., at 501 W. Walnut St., Compton CA 90220, Attn:
Customer Service, or call (800)-223-5546, within 15 days of the Occurrence. Be
prepared to provide the following information:
a. The part number of the Belkin product.
b. Where you purchased the product.
c. When you purchased the product.
d. Copy of original receipt.
2. Your Belkin Customer Service Representative will then instruct you on how to forward
your receipt and Belkin product and how to proceed with your claim.
Belkin reserves the right to review the damaged Belkin product. All costs of shipping the
Belkin product to Belkin for inspection shall be borne solely by the purchaser. If Belkin
determines, in its sole discretion, that it is impractical to ship the damaged equipment
to Belkin, Belkin may designate, in its sole discretion, an equipment repair facility to
inspect and estimate the cost to repair such equipment. The cost, if any, of shipping the
equipment to and from such repair facility and of such estimate shall be borne solely by
the purchaser. Damaged equipment must remain available for inspection until the claim is
finalized. Whenever claims are settled, Belkin reserves the right to be subrogated under
any existing insurance policies the purchaser may have.
How state law relates to the warranty.
THIS WARRANTY CONTAINS THE SOLE WARRANTY OF BELKIN. THERE ARE
NO OTHER WARRANTIES, EXPRESSED OR, EXCEPT AS REQUIRED BY LAW,
IMPLIED, INCLUDING THE IMPLIED WARRANTY OR CONDITION OF QUALITY,
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, AND SUCH IMPLIED
WARRANTIES, IF ANY, ARE LIMITED IN DURATION TO THE TERM OF THIS WARRANTY.
Some states do not allow limitations on how long an implied warranty lasts, so the above
limitations may not apply to you.
IN NO EVENT SHALL BELKIN BE LIABLE FOR INCIDENTAL, SPECIAL, DIRECT,
INDIRECT, CONSEQUENTIAL OR MULTIPLE DAMAGES SUCH AS, BUT NOT LIMITED
TO, LOST BUSINESS OR PROFITS ARISING OUT OF THE SALE OR USE OF ANY
BELKIN PRODUCT, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
This warranty gives you specific legal rights, and you may also have other rights,
which may vary from state to state. Some states do not allow the exclusion or limitation
of incidental, consequential, or other damages, so the above limitations may not apply
to you.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
|