Blaupunkt Car Stereo System CC 28 User Manual

Radio/Cassette  
Lyon  
CC 28  
CONVENIENCE  
CONTROL  
Operating instructions  
FF  
EJECT  
VOLUME  
LYON CC 28  
LYON CC 28  
lo  
lo  
m
m
TONE  
FM-T 1-5  
M
-L  
-
lo  
-
m
-
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Important information .................. 10  
Traffic safety ......................................... 10  
Installation / Hook-up ............................ 10  
Radio operation ............................ 10  
Select the frequency range ................... 10  
Station search ....................................... 10  
Manual station search ........................... 10  
Adjusting station search sensitivity ....... 10  
Stereo - mono switch ............................ 10  
Storing stations ..................................... 11  
Storing the strongest stations  
automatically ......................................... 11  
Recalling stored stations ....................... 11  
Cassette tape operation .............. 11  
Insert cassette tape............................... 11  
Remove cassette tape .......................... 11  
Fast forward .......................................... 11  
Care of your audio equipment............... 12  
Appendix ....................................... 12  
Technical data....................................... 12  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Legend  
1 On/off  
Turn knob.  
On  
5
9 FM•T (frequency modulation)  
Switch for the FM memory banks I, II,  
III and “T” (Travelstore) - for storing and  
recalling the six nearest, strongest stati-  
on signals.  
Station selection  
automatic or manual (“m” in display).  
Switch over by pressing lo•m 6  
Off  
Adjust volume:  
Turn knob.  
Store “T”:  
Press FM•T until the search begins in  
the display.  
6 lo•m  
Io lit up in the display indicates normal  
2 Cassette tape slot  
sensitivity for the station search  
function (only FM).  
Recall “T”:  
Press FM•T until T appears in the dis-  
play. Then press the station button qui-  
ckly and repeatedly if necessary.  
3 FF - Fast forward  
Start/end fast forward: press button  
gently.  
Io not lit up in the display indicates high  
sensitivity for the station search  
function (only FM).  
Eject - Eject cassette tape:  
Press button firmly.  
: TONE  
m lit up indicates manual station fine  
tuning.  
Adjust tone.  
more bass  
more treble  
4 Display for  
frequency range  
frequency  
Added feature:  
Switch over from stereo to mono:  
Press lo•m for longer than 2 seconds.  
7 M•L  
AM and long-wave (LW) switch.  
Press this button repeatedly if neces-  
sary.  
memory bank  
channel preset  
8 1-5  
For storing and recalling radio stations  
stereo  
manual fine  
tuning  
sensitivity  
(station search)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Important information  
Radio operation  
If you hold the button pressed, then the  
frequencies will move up or down more  
quickly.  
Traffic safety  
Select the frequency range  
As the driver of a motor vehicle, it is your  
responsibility to pay attention to the traffic  
situationatalltimes.Neveruseyourcarradio  
in a way that could distract you. Should the  
traffic situation become particularly deman-  
ding, we would advise you not to use the  
radio. Please keep in mind that you travel a  
distance of 14 m per second at a speed of  
only 50 km/h. When adjusting the volume,  
make sure that you are still able to hear  
sounds coming from outside of the vehicle,  
so that you are always able to react to war-  
ning signals.  
You can choose between the frequency ran-  
ges:  
FM 87.5 – 108 MHz,  
AM 531 – 1602 kHz and  
LW 153 – 279 kHz.  
Adjusting station search sensiti-  
vity (only FM)  
You can adjust the sensitivity (FM) of the  
automatic station search.  
Switch on the desired frequency range  
by pressing either the button FM•T or  
M•L.  
Press lo•m.  
When “Io” is visible in the display, then  
only those stations with relatively strong  
signals will be picked up (low sensitivi-  
ty).  
When “Io” is not visible in the display,  
then stations with weaker signals will  
also be picked up (high sensitivity).  
Switching between AM and LW:  
Press M•L.  
Station search  
m should not be lit up in the display. If it is,  
switch it off by pressing lo • m  
Installation / Hook-up  
If you would like to install your new car radio  
yourself or add other audio components to  
theexistingones,thenpleasereadtheenclo-  
sed instructions on installation and hook-up  
carefully.  
Do not ground the loudspeaker outputs!  
UseonlyBlaupunkt-certifiedaccessoriesand  
spare parts.  
press right or left.  
Stereo - mono switch  
The car radio will automatically tune  
into the next station.  
If you would like to switch between stereo  
and mono reception:  
If you hold the button pressed, the search  
function will forward quickly.  
Press lo•m for approximately 2 se-  
conds.  
During stereo reception the stereo sym-  
Manual station search  
bol  
will light up in the display.  
m (manual) must be lit up in the display. If it  
is not, switch it on by pressing lo•m.  
Each time the car radio is switched on, the  
reception will automatically be set to stereo.  
The radio will automatically switch to mono  
when the reception conditions are poor.  
press right or left quickly.  
The frequency will move up or down in  
short intervals.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cassette tape operation  
Storing stations  
Storing the strongest stations  
automatically  
Insert cassette tape  
For each memory bank (I, II, III, T) you can  
store up to five stations using the button 1-5. (Travelstore)  
Switch the car radio on.  
Insert a cassette tape with the empty  
reel facing forward and the open side  
facing to the left.  
In your reception area you can automatically  
store the five nearest FM stations, sorted  
according to their frequencies.  
This feature is particularly useful when you  
are travelling.  
For FM select the memory bank by  
pressing FM•T.  
You can store 5 stations each for AM and LW  
frequencies.  
Tape playback will begin.  
When the tape has run to the end, the car  
radio will switch on automatically.  
Select the button 1-5 to store the new  
Press FM•T for at least 2 seconds.  
The radio will search for the nearest FM  
stations and store them in the memory  
bank “T” (Travelstore). When the pro-  
cess has been completed, the first stati-  
on will be set.  
station and press it.  
Press  
to tune in the station you  
Remove cassette tape  
want to store (automatically or manual-  
ly).  
Press FF / Eject firmly.  
The cassette will be ejected.  
Press the button 1-5 and hold it. First  
the station will be muted and then be-  
come audible again.  
If you wish, you can also store stations in the  
Travelstore memory bank manually.  
Fast forward  
The station has been stored in the memory  
bank.  
The corresponding memory bank and the  
button preset will appear in the display.  
To begin and end fst forwarding,  
Press FF / Eject gently.  
Recalling stored stations  
Youcanrecallthestoredstationsbypressing  
the corresponding buttons.  
Note:  
Select the memory bank.  
Press FM•T until I, II, III or T appears in  
the display.  
If you tune into a station which has already  
been stored, then the corresponding button  
preset and the memory bank will flash in the  
display for approximately 5 seconds.  
Select the station by pressing the but-  
ton 1-5, press repeatedly if necessary.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Care of your audio equipment  
Technical data  
We recommend that you use only C60/C90  
cassette tapes in your car radio. Protect your  
cassettes from dirt, dust and temperatures  
exceeding 50 °C. During cold weather, allow  
cold cassettes to warm up somewhat before  
playing them in order to avoid uneven tape  
transport. Operating problems and sound  
distortions may occur after approximately  
100 hours of playing time and are caused by  
dust particles which adhere to the rubber  
roller pad and the tape head. Use a cleaner  
cassette to remove normal dirt build-up. If  
more dirt than usual has accumulated, use a  
cotton bud dipped in rubbing alcohol to clean  
these parts. Never use any hard tools.  
Amplifier:  
Output power:  
2 x 5.5 W RMS power  
according to DIN 45324/  
3.1 at 4  
FM:  
Sensitivity:  
1.3 µV at 26 dB  
S/N ratio  
35 - 15 000 Hz (-3 dB)  
Response:  
Cassette:  
Response:  
40 - 14 000 Hz (-3 dB)  
Information subject to change!  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Illustrationen • Illustrations • Ilustraciones • Illustrazioni • Illustrationer • Afbeeldingen • Ilustraçoes  
L
R
8 601 310 742  
182  
165  
L
L
R
F
F
53  
R
L
R
R
R
150  
LR  
LF  
58,5  
RF  
RR  
50  
5,2-6,3  
188  
Amplifier  
Equalizer  
Fader  
)
V
+
+
)
A
.
N
D
(12  
N
R
N
IO  
N
N
E
E
U
IT  
N
O
W
T
C
R
O
P
A
AC  
(IG  
G
L
L
R
F
F
+12V  
+12V  
R
+12V  
L
R
+12V  
R
R
+12V  
+12V  
8 908 603 223  
8 601 910 002  
+12V  
30  
Kl.  
1
2
1
V
2
2
1
Blaupunkt-Werke GmbH  
Bosch Gruppe  
3/98  
K7/VKD 8 622 401 406  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Billy Goat Vacuum Cleaner MV650H User Manual
Black Decker Convection Oven CTO4550SD User Manual
Braun Electric Shaver 1735 User Manual
Breville Electric Steamer BFS600 User Manual
Carrier Heat Pump 50YX User Manual
Carson Car Amplifier SA 500 11 14V User Manual
CDA Refrigerator CW897 User Manual
Cecilware Espresso Maker HC600 User Manual
Century Washer PM 1634AB 6 01 User Manual
Chicago Electric Work Light 66433 User Manual