P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page a
Hi-Speed USB 2.0
External Drive Enclosure
User Manual
P74080
F5U209
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page c
TABLE OF CONTENTS
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1
System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Assembling Your Drive Enclosure . . . . . . . . . . . . . . . . . . . . . . . . .3
Driver Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Safe Removal of the USB Disk . . . . . . . . . . . . . . . . . . . . . . . . . .10
Format the USB 2.0 External Drive . . . . . . . . . . . . . . . . . . . . . .11
Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page d
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 1
INTRODUCTION
The Hi-Speed USB 2.0 External Drive Enclosure (the External Drive) is
a portable compact storage drive that incorporates the USB 2.0
(Universal Serial Bus 2.0) high-speed interface. The External Drive
provides a fast and easy way to add more storage space to your
computer. The Plug-and-Play feature gives you great convenience on
the road, the External Drive can be easily connected to your
computer by USB interface, and can even be disconnected and
reconnected while the computer is running.
Note: To enable Hi-Speed USB 2.0 mode (480Mbps), your computer
must be equipped with built-in USB 2.0 ports or a USB 2.0 host
adapter card.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 2
SYSTEM REQUIREMENTS
Hardware
Notebook and desktop computer with USB 1.0 or USB 2.0 port
Operating System
Windows® 98 SE, Me, 2000, or XP
2
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 3
ASSEMBLING YOUR DRIVE ENCLOSURE
1. Remove top of the External Drive.
1
2
2. If you are installing a 3 / -inch hard drive, check to make
sure your drive is set to “Master” (see jumper setting
information printed on top of your disk drive), then
connect the 34-position data cable and 4-position
power cable.
3. If you are installing a CD/CD-RW drive, check to make
sure your drive is set to “Master”, then connect the
34-position data cable, 4-position power cable, and
4-position audio cable.
4. Choose the set of mounting holes that match the drive
you intend to use, and install at least four of the provided
mounting screws.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 4
ASSEMBLING YOUR DRIVE ENCLOSURE
Note: There are four fine-threaded screws, and four
course-threaded screws included with your Hi-Speed External
Drive Enclosure Kit. Be sure to choose the screws that match
the mounting holes for your drive. Do not try to force a
course-threaded screw into a fine-threaded mounting hole.
5. Replace top cover and make sure it is aligned with
bottom cover.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 5
ASSEMBLING YOUR DRIVE ENCLOSURE
6. Hook the first side rail around the front edge of the
External Drive and press the rail into the six
rectangular-shaped mounting holes on the side.
7. If you are installing a hard disk, it is necessary to install
the front panel. Insert the tabs on one side of the front
panel into the mounting holes in the installed side rail.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 6
ASSEMBLING YOUR DRIVE ENCLOSURE
8. Insert the mounting tabs on the free end of the front panel
into the second side rail, and hook the side rail onto the
front of the External Drive.
9. Finish the assembly by pressing the rail into the six
rectangular mounting holes in the side of the External Drive.
Important Note: If you are using Windows 98 or 98 SE, DO
NOT connect the External Drive to your computer until driver
installation is completed.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 7
ASSEMBLING YOUR DRIVE ENCLOSURE
10. Plug the square-shaped connector of the USB cable into
the USB port on the rear panel of the External Drive.
11. Plug the rectangular-shaped connector of the USB
cable into a Hi-Speed USB 2.0 port on your computer or
Hi-Speed USB 2.0 hub. You may also connect the cable to
a full-speed USB 1.1 port on your computer or full-speed
USB 1.1 hub.
Note: When connected to a full-speed USB 1.1 port, the
maximum USB bandwidth will be 12 Mbps.
12. Plug the AC power cord into the power connector on the
rear panel of the External Drive, and into an AC wall outlet.
13. Power on the drive.
14. Proceed to Driver Installation section.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 8
DRIVER INSTALLATION
Windows 98 SE
1. Insert the installation CD into your CD-ROM drive.
2. Open the Install CD.
3. Run the “TPPINST.EXE” to install the drivers for your
USB 2.0 External Drive.
4. An installer dialog box appears. Click “Next”.
5. Choose “Complete” and click “Next”.
6. You may now connect the External Drive to your computer.
7. Windows will now detect “USB Storage Adapter”, and finish
installation of the required device drivers.
8. If your new drive is already partitioned, it will now appear in
the “My Computer” window as a “Removable Disk”.
Note: If the removable disk option is not selected in the
Device Manager Settings window, your new drive will appear
as a standard Windows fixed disk.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 9
DRIVER INSTALLATION
Note: If the new drive does not appear in My Computer, you
may need to partition and format the drive. Please refer to the
“Format the USB 2.0 External Drive” section to prepare your
USB 2.0 hard disk drive.
A green “Unplug or Eject Hardware” icon will appear in the
system tray.
Windows Me/2000/XP
1. If you are plugging the External Drive into your computer for
the first time, Windows will detect “USB 2.0 Storage Device”
and install the USB mass storage device class driver, which is
built into Windows.
2. Your new drive will now appear in the “My Computer”
window as a “USB Disk”.
Note: If the new drive does not appear in My Computer, you
may need to partition and format the drive. Please refer to the
“Partition the USB 2.0 External Hard Disk” section to prepare
your USB 2.0 hard disk drive.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 10
SAFE REMOVAL OF THE USB
DISK FROM WINDOWS
Windows 98
1. Click the green “Unplug or Eject Hardware” icon in the
system tray and select the device that you want to remove.
2. When the system prompts “You may safely remove this
device”, unplug the USB cable from the USB port of
your computer.
Windows Me/2000/XP
1. Double-click on the “Unplug or Eject Hardware” icon
in the system tray.
2. Select the “USB Mass Storage Device” then click “Stop”.
3. Choose the USB 2.0 External Drive that you want to
disconnect, then click on “Stop” again.
4. When the system prompts “You may safely remove this
device”, unplug the USB cable from the USB port of
your computer.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 11
FORMAT THE USB 2.0 EXTERNAL DRIVE
Format under Windows 98/Me
1. Boot-up the computer into the Windows operating system.
2. Plug in your External Drive.
There are two methods to partition and format your
USB 2.0 hard disk drive.
Control Panel Method
1. Click “Start” and choose “Setting”.
2. Choose “Control Panel”.
3. Double-click on “System”, then “Device Manager”.
4. The following screen will appear.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 12
FORMAT THE USB 2.0 EXTERNAL DRIVE
5. Select “Disk Drives”. Your new hard disk will appear in the
hard drive list (in this case as “Toshiba 1924FCV”).
6. Double-click on the entry for your hard drive. Select
“Settings”. The following screen will appear.
7. Make sure there are check marks in the “Disconnect”,
“Sync Data Transfer”, “Removable”, and “Int 13 unit” boxes.
After making these changes, it will be necessary to restart
your computer.
8. After Windows restarts, a “Removable Disk” icon will appear
in the “My Computer” window.
9. Right-click the “Removable Disk” icon and select “Format”
from the drop-down list.
10. Your removable hard drive is now ready for use.
Note: Using this method to format your removable hard drive
will result in a single partition equal in size to the maximum
rated capacity of your hard disk.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 13
FORMAT THE USB 2.0 EXTERNAL DRIVE
DOS Method (Recommended for Advanced Users Only)
1. Click on “Start”, and choose “Programs”. Select “MSDOS”.
2. At the DOS prompt, type “FDISK” and press “Enter”.
Note: If the FDISK utility terminates without displaying an error
message, exit back to Windows and disconnect the External
Drive. Reboot your computer. When Windows restarts,
reconnect the External Drive and go back to Step 1.
3. In the opening FDISK screen, answer the question: “Do you
want to enable large disk support?” Enter “Y” if you want to
create a partition larger than 2GB. Enter “N” if you want to
create a partition smaller than 2GB.
4. The FDISK “Options” screen will now appear. Select option
5, “Change Current Fixed Disk”. Select your new disk from
the list of available drives.
5. In the “Change Current Fixed Disk Drive” screen, enter the
disk drive number that is assigned to your External Drive.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 14
FORMAT THE USB 2.0 EXTERNAL DRIVE
IMPORTANT
Be sure that you select option 5 and change the “Current
Fixed Disk” from “Disk 1” to the disk number assigned to your
External Drive. If your computer is equipped with only one
internal drive, your new External Drive will be identified as
“Disk 2”. If your computer is equipped with two internal disk
drives, your new External Drive will be identified as “Disk 3”.
Failure to follow this step will result in the loss of all data on
your primary internal hard disk.
6. In the steps that follow, you must specify if you want to
create one partition equal to the maximum capacity of
your external disk drive, or if you want to create
multiple partitions.
7. After completing the disk partition procedure, exit FDISK
and restart Windows. Any new drives created through the
disk partition procedure must now be formatted using the
Windows disk format utility.
Partition under Windows 2000/XP
1. To partition the USB 2.0 hard disk drive under Windows
2000, please plug in the USB 2.0 External Drive, then click on
“Start”, choose “Settings”, then choose “Control Panel”.
Double-click the “Administrative Tools” icon, then
double-click the “Computer Management” icon. You will see
the screen on the next page.
Note: In Widows XP, click on “Start”, choose “Control Panel”,
click on the “Performance & Maintenance” icon, click on the
“Administrative Tools” icon, then click on the “Computer
Management” icon.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 15
FORMAT THE USB 2.0 EXTERNAL DRIVE
Note: If you are viewing the Control Panel in classic mode,
proceed directly to “Administrative Tools”.
2. Click on “Disk Management”. All connected disk drives will
be displayed in the lower right-hand corner of the
“Computer Management” window. Information regarding
the status of each of your disk drives will be displayed in this
window. Right-click on the status bar for your new external
drive to create or delete new partitions, and/or format an
existing partition.
Note: When creating a new partition, a “New Partition Wizard”
will start and guide you through the setup. This will also format
the drive for you.
3. Once the disk partition and format procedure is completed,
your new External Drive is ready for use.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 16
INFORMATION
FCC Statement
DECLARATION OF CONFORMITY WITH FCC RULES FOR
ELECTROMAGNETIC COMPATIBILITY
We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220,
declare under our sole responsibility that the product:
F5U209
to which this declaration relates:
Complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this
device must accept any interference received, including interference that may
cause undesired operation.
CE Declaration of Conformity
We, Belkin Corporation, declare under our sole responsibility that the F5U209, to which this
declaration relates, is in conformity with Generic Emissions Standard EN55022 1998 and with
Generic Immunity Standard EN55024 1998, LVD61000-2-3, and LVD61000-3-3.
Belkin Corporation Limited Lifetime Product Warranty
Belkin Corporation warrants this product against defects in materials and workmanship for its
lifetime. If a defect is discovered, Belkin will, at its option, repair or replace the product at no
charge provided it is returned during the warranty period, with transportation charges
prepaid, to the authorized Belkin dealer from whom you purchased the product. Proof of
purchase may be required.
This warranty does not apply if the product has been damaged by accident, abuse, misuse,
or misapplication; if the product has been modified without the written permission of Belkin;
or if any Belkin serial number has been removed or defaced.
THE WARRANTY AND REMEDIES SET FORTH ABOVE ARE EXCLUSIVE IN LIEU OF ALL OTHERS,
WHETHER ORAL OR WRITTEN, EXPRESSED OR IMPLIED. BELKIN SPECIFICALLY DISCLAIMS
ANY AND ALL IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
No Belkin dealer, agent, or employee is authorized to make any modification, extension, or
addition to this warranty.
BELKIN IS NOT RESPONSIBLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES RESULTING FROM ANY BREACH OF WARRANTY, OR UNDER ANY OTHER
LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO OR REPROGRAMMING, OR REPRODUCING ANY PROGRAM
OR DATA STORED IN OR USED WITH BELKIN PRODUCTS.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
P74080-F5U209-man_8-02.qxd 8/26/02 12:36 PM Page 17
Belkin Corporation
501 West Walnut Street
Compton • CA • 90220 • USA
Tel: 310.898.1100
Fax: 310.898.1111
Belkin Components, Ltd.
Express Business Park
Shipton Way • Rushden • NN10 6GL
United Kingdom
Tel: +44 (0) 1933 35 2000
Fax: +44 (0) 1933 31 2000
Belkin Components B.V.
Starparc Building • Boeing Avenue 333
1119 PH Schiphol-Rijk • The Netherlands
Tel: +31 (0) 20 654 7300
Fax: +31 (0) 20 654 7349
Belkin Components Ltd.
7 Bowen Crescent • West Gosford
NSW 2250 • Australia
Tel: +61 (0) 2 4372 8600
Fax: +61 (0) 2 4372 8603
Belkin Tech Support
US:
310.898.1100 ext. 2263
800.223.5546 ext. 2263
Europe: 00 800 223 55 460
Australia: 1800 666 040
© 2002 Belkin Corporation. All rights reserved.
All trade names are registered trademarks of respective manufacturers listed.
P74080
Download from Www.Somanuals.com. All Manuals Search And Download.
|