OWNER'S MANUAL
ILL
PWR
OPEN
ACD-83
CD-R/RW PLAYBACK
Sub.
W
CLAS
POP
Tune
/Seek
/Track
EQ
T/F
MONO
JAZZ
LOC
REG
LOUD
MONO
ST
AF TA
EON
AS/PS
TP PTY
ME/CR
MULTI-COLOR FLOURESCENT DISPLAY
SCAN LOC
POWER LEVEL METER
MUTE
BAND
LOUD
SEL
1
PAU
2
SCN
3
RPT
4
SHF
5
D.DN
6
D.UP
MODE
ACD-83
AM/FM/MPX RADIO WITH
FOLD-DOWN DETACHABLE FRONT PANEL,
COMPACT DISC PLAYER,
CD CHANGER CONTROLS,
WIRELESS REMOTE CONTROL
AND QUARTZ CLOCK
128-6003A
1 of 20
.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
TOLL-FREE INSTALLATION ASSISTANCE
The installation and wiring connections for this unit are so simple, we doubt you'll need our help, but, if you do,
we're here to help you. Just call our toll-free telephone assistance line at 1-800-645-4994 during the days and
hours shown (U.S.A. and Canada only).
TIME ZONE
MOUNTAIN
DAY
PACIFIC
CENTRAL
EASTERN
MON. - FRI.
SATURDAY
8:30AM - 7PM
9AM - 5PM
7:30AM - 6PM
8AM - 4PM
5:30AM - 4PM
6AM - 2PM
6:30AM - 5PM
7AM - 3PM
UNIVERSAL INSTALLATION USING MOUNTING SLEEVE
NUT (5MM)
PERFORATED STRAP
EXISTING DASH OPENING
FILE EDGES TO FIT IF NECESSARY - DO NOT OVERFILE
NOTE:IFDASHISSOLID,USEREARSIDE(WITHOUTTHELIP)OF
MOUNTING SLEEVE AS A TEMPLATE & CUT OPENING
FASTEN THIS END TO SCREW
STUD ON REAR OF CHASSIS
BEND TOP
TABS UPWARD
SCREW
(5MM)
BEND BOTTOM
TABS DOWNWARD
RADIO
SCREW STUD
NUT (5MM)
MOUNTINGSLEEVE
FASTEN THIS END TO SECURE PART OF DASHBOARD.
DRILL HOLE IF NECESSARY.
REMOVALTOOLS
CAUTION:
FOR PROPER OPERATION OF THE CD PLAYER, THE CHASSIS
MUST BE MOUNTED WITHIN 20° OF HORIZONTAL. MAKE SURE
THE UNIT IS MOUNTED WITHIN THIS LIMITATION.
FOLD-DOWN
DETACHABLE
FRONT PANEL
20° MAX.
SIDEVIEW
OF
FRONT PANEL
CHASSIS
ISO INSTALLATION
TYPICAL INSTALLATION
REMOVE THE PLASTIC FRAME FROM THE FRONT OF
THE CHASSIS BY CAREFULLY UN-SNAPPING IT.
MAXIMUM
SCREWSIZE
M5 x 8
UN-SNAP AT 2 PLACES
EACH ON TOP AND BOTTOM
MAXIMUM
SCREWSIZE
M5 x 8
PLASTICFRAME
2
FACTORY MOUNTING
BRACKETS
128-6003A
3 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER WIRING
RADIO WIRING
REFER TO PAGE 5 FOR SPEAKER WIRING
AUTOMATIC
ANTENNA
ANTENNA
BLUE
IMPORTANT
THE BLUE WIRE CAN BE USED TO
FUSEBLOCK
REMOTELY ACTIVATE AN AUTOMATIC
ANTENNAORANEXTERNALAMPLIFIER
(SEE ANTENNAORAMPLIFIERMANUAL)
EXISTING
ANTENNA
CABLE
“RADIO” FUSE
+12VACCESSORY
RED
0.5AMPFUSE
SCREW
BLACK
METALPARTOFDASH
(DRILLHOLEIFNECESSARY)
CARBATTERY
YELLOW
15AMPFUSE
IMPORTANT
YELLOW WIRE MUST BE
CONNECTEDASSHOWNOR
RADIO WILL NOT OPERATE
PROPERLY
POSITIVE(+)TERMINAL
12 VOLT BATTERY
4-PINPLUGS
9PINPLUG
(SEEPAGE5FORSPEAKERWIRING)
ANTENNALEAD
ONREAROFRADIO
EXTERNALINVERTERFOR
VFDDISPLAYBACKLIGHTING
3
128-6003A
4 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPEAKER WIRING
REFER TO PAGE 4
FOR RADIO WIRING
WARNING!
l THE AMPLIFIERS IN THIS RADIO ARE ONLY DESIGNED FOR USE WITH 4 SPEAKERS.
l NEVER COMBINE (BRIDGE) OUTPUTS FOR USE WITH 2 SPEAKERS.
l NEVER GROUND NEGATIVE SPEAKER LEADS TO CHASSIS GROUND.
l FAILURE TO WIRE EXACTLY AS SHOWN BELOW MAY CAUSE ELECTRICAL
NOTE:
RCALINEIN
(AUX)JACKS
FORUSEWITH
EXTERNALCD
PLAYER, ETC
RCALINEOUT
JACKS
FORUSEWITH
OPTIONAL
EXTERNAL
AMPLIFIERS
THIS RADIO WILL CONTROL RAMPAGE CD
CHANGERMODEL. CHECKWITHYOURRAMPAGE
AUDIOVOXCARSTEREOSPECIALISTORCALL
1-800-645-4994 FOR RECOMMENDATIONS OF
OTHER MODELS THAT WILL WORK WITH YOUR
RADIO.
RADIO
R
DINCABLE(SUPPLIED
WITH CD CHANGER).
6
C
O
M
P
A
C
T
GREY
BLK
8-PIN DIN SOCKET FOR CONNECTION TO
OPTIONAL CD CHANGER
WHITE = LEFT
RED=RIGHT
4-PINPLUGS
9-PINPLUGS
SEEPAGE4FOR
RADIOWIRING
LEFTFRONTSPEAKER
RIGHTFRONTSPEAKER
GRAYw/BLACKSTRIPE
GRAY
WHITEw/BLACKSTRIPE
WHITE
GREEN
VIOLET
GREENw/BLACKSTRIPE
VIOLETw/BLACKSTRIPE
HELP!
1-800-645-4994
Monday - Friday 8:30am - 7:00pm Eastern
Saturday 9:00am - 5:00pm Eastern
4
LEFTREARSPEAKER
RIGHTREARSPEAKER
128-6003A
5 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
19, 27, 30, 31
(BEHIND PANEL)
11, 20, 21, 36, 37
16,17,33
32
2
1
ILL
OPEN
PWR
ACD-83
CD-R/RW PLAYBACK
29
28
13
Sub.
W
CLAS
POP
Tune
/Seek
/Track
EQ
T/F
MONO
AS/PS
JAZZ
LOC
REG
LOUD
MONO
ST
AF TA
EON
TP PTY
ME/CR
MULTI-COLOR FLOURESCENT DISPLAY
SCAN LOC
POWER LEVEL METER
14
MUTE
BAND
LOUD
SEL
1
PAU
2
SCN
3
RPT
4
SHF
5
D.DN
6
D.UP
MODE
23
38
24
39
25
40
26
35
9
12
28
22
18
34
8,10
3, 4, 5, 6, 7
15
1
POWER/ILL BUTTON ( PWR )
3
PUSH SELECT CONTROL (SEL)
This button is used to select the audio
function (volume, bass, treble, balance, or
Press this button to turn the unit on or off. If
the ignition switch is “on”, the unit will also
turn on automatically when a compact disc is
inserted, or if any other button is pressed.
When the radio is on, each time the button
is momentarily pressed and released, the
VFD display panel back-lighting intensity
will change from low-to-medium-to-high, and
AUDIO CONTROL buttons
fade) whose setting is adj2usted using the
. Pressing the
SEL button once will set the unit for volume
adjustment (VOL on the display). Additional
presses will set the unit for bass adjustment
(BAS on the display panel), treble adjustment
then back to low, thereby providing three dif- (TRB on the display), balance (BAL), or fader
(FAD). The display will automatically return
to the normal indication 5 seconds after the
last adjustment or when another function is
activated.
ferent intensity settings.
2
AUDIO CONTROL (
/
) SELECT
To increase the volume level, press the
button. The volume will increase and the level
will shown on the display panel from a mini-
mum of VOL 00 to a maximum of VOL
100. To decrease the volume level, press
while the Equalizer function
NOTE: If the BAS or TRE functions arceuset
is
active, the Equalizer function will
automatically revert to the FLAT
setting.
the
button. The display will automati-
cally return to the normal indication 5 sec-
onds after the last volume adjustment or 4
BASS CONTROL
To adjust the bass level, first select the Bass
when another function is activated. These
control buttons are also used in conjunction
mode by pressing the SEL button
BAS indication appears on the display panel.
to adjust
3
so the
5
with the Select (SEL) button
3
mode, press the
AUDIO CONTROL
Within 5 seconds of choosing the Ba2ss
the bass, treble, ba5lance and fader levels
as described in and
4
,
,
6
7
.
128-6003A
6 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
button to decrease the bass response, or
indication 5 seconds after the last
adjustment or when another function is
activated.
the
AUDIO CONTROL button to increase
it as desired. The level will be shown on the
display panel from a minimum BAS --10 to
a maximum of BAS 10 (BAS 00 indicates
flat response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
7
FRONT/REAR FADER CONTROL
To adjust the front-rear speaker balance, first
select the Fader mode by pressing the SEL
button
3
so the FAD indication appears on
the display panel. Within 5 seconds of
choosing the Fader mod2e, press the
to adjust the
5
TREBLE CONTROL
To adjust the treble level first select the Treble
mode by pressing the SEL button
AUDIO CONTROL button
front-rear speaker balance to the front
speakers or the AUDIO CONTROL button
to adjust it to the rear speakers. The fader
position will be shown on the display panel
from FAD 10R (full rear) to FAD 10F (full
front). When the level between the front and
rear speakers is equal, FAD F=R will be
shown on the display panel. The display will
automatically return to the normal indication
5 seconds after the last adjustment or when
another function is activated.
3
so the
TRB indication appears on the display panel.
Within 5 seconds of choosing the Treble
mode, press the AUDIO CONTROL button
2
to decrease the treble response or the
AUDIO CONTROL button to increase it
as desired. The level will be shown on the
display panel from a minimum TRB --10 to a
maximum of TRB 10 (TRB 00 indicates flat
response). The display will automatically
return to the normal indication 5 seconds
after the last adjustment or when another
function is activated.
8
LOUDNESS CONTOUR (LOUD)
When listening to music at low volume
levels, this feature will boost the bass and
treble ranges to compensate for the
characteristics of human hearing. Press and
hold the BAND/LOUD button for more than
2 seconds to activate this feature; the LOUD
ON indication will appear on the display panel
for 5 seconds, and LOUD will also appear
and remain. Pressing the button again for
more than 2 seconds will deactivate the
feature (LOUD OFF indication will appear
on the display panel for 5 seconds, and
LOUD will also disappear).
6
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first
select the Balance mode by pressing the
SEL button 3so the BAL indication appears
on the display panel. Within 5 seconds of
choosing the Balance mode, press the
AUDIO CONTROL button
stereo balance to the left channel speakers
or the AUDIO CONTROL button to adjust
it to the right channel speakers. The balance
position will be shown on the display panel
from BAL 10L (full left) to BAL 10R (full right).
When the volume level between the left and
right speakers is equal, BAL L=R will be
shown on the display panel. The display will
automatically return to the normal
2
to adjust the
9
AUDIO MUTE SELECTOR (MUTE)
Press this button momentarily to mute the
volume from the system ( MUTE will appear
blinking on the display panel). Pressing the
6
128-6003A
7 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
bn
level will return to the volume
level setting in use before the Mute function
LOCAL BUTTON
button again or adjusting the AUDIO
This feature is used to select the strength of
the signals at which the radio will stop during
Manual Seek Tuning. Pressing and holding
the button will select the Local setting
(LOCAL will appear on the display panel for
5 seconds and LOC will remain in the lower
left corner) and only strong (local) stations
will be received. Pressing and holding the
button again will select the Distant setting
(Dx will appear on the display panel for 5
seconds) and the radio will stop at a wider
range of signals, including weaker (more
distant) stations.
CONTROL
2
was activated.
During disc play, pressing this button will
mute disc audio and disc play will be paused.
During this time, the
indication will remain
on the display panel to show that a disc is
still loaded in the unit.
bl
AM/FM BAND SELECTOR (BAND)
Each time this button is pressed, the radio
band is changed. The indication AM, F1, F2
or F3 will appear on the display panel
according to your selection.
bo
FM MONO/STEREO BUTTON (MONO)
During FM radio operation, this button is
used to select monaural or stereo reception
of the broadcast signal. Under normal
reception conditions, the unit should be left
in the stereo mode as indicated by the ST
indication on the display panel when tuned
to an FM stereo signal. If the stereo signal
is too noisy for comfortable listening, press
the MONO button to switch to monaural
reception (the ST indication will disappear
from the display panel and MONO will
appear). To return to stereo reception mode,
press the button again so that the ST
ibnpdication appears on the display panel.
Press this button momentarily to scan the
stations pre-set into the six memories of the
current band in use. The unit will stop at each
pre-set station for 5 seconds before
continuing to the next pre-set station (the
pre-set frequency on the display panel will
flash during Pre-Set Scan operation). Press
the button again momentarily to stop Pre-
Set Scan operation and remain on the
bm
UP/DOWN TUNE/SEEK/TRACK
) BUTTONS
To manually select a radio station,
momentarily press the Up Tuning (
button to tune the unit higher, or the Down
Tuning ( ) button to tune lower within the
(
/
)
selected band. The radio will automatically
tune to the next strong station and stop on
this frequency. If the LOCAL mode is in effect,
the radio will seek the next local station and
stop at that frequency.
Pressing either button for longer than 2
seconds will cause MANUAL to appear on
the display, accompanied by a beep tone,
thereby entering the seek mode. Pressing a
button in this mode will cause the radio to
rapidly tune in the up or down direction and
stop when the button is released. The radio
will then remain at that frequency. Five
seconds after Manual tune is inactive, AUTO
will momentarily appear for 2 seconds,
thereby reverting to the normal tuning mode.
PRE-SET SCAN (PS)
AUTO-STORE TUNING (AS)
7
128-6003A
8 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
selected frequency. If no buttons are pressed
during the scan, the unit will return to the
original station before the scan started.
Pressing and holding the button for longer
than 2 seconds will activate the Auto-Store This display consists of a left and right six-
Tuning feature which will automatically scan bar graph which provides a visual
and enter up to 6 stations into the pre-set representation of the audio signal level
memories on each FM band. If you have applied to the left and right channels. The
already set the pre-set memories to your illuminated segments of the left and right
favorite stations, activating the Auto-Store channel bar graphs increase and decrease
Tuning feature will erase those stations and as a function of the audio signal strength
enter the new ones. This feature is most applied to the left and right channels. As the
useful when traveling in a new area where signal increases, the number of illuminated
you are not familiar with the local stations. segments will increase and vice-versa.
illumination levels as selected by the
PWR/ILL button
1
.
bs
POWER LEVEL METER DISPLAY
bq
STATION PRE-SET MEMORIES
bt
MODE SELECTOR (MODE)
To set any of the 6 pre-set memories in each
band, use the following procedure:
1. Turn the radio on and select the desired
band.
This button is used to select the radio, CD
player, CD changer (if installed) or auxiliary
(AUX) input playback mode. Each press of
the button will select a different mode as
indicated on the display panel.
2. Select the first station to be pre-set
using thebmTUNE/SEEK/TRACK
.
During CD player operation, this button may
be used to change to radio, AUX input (MP3
3. Press the pre-set button to be set and or external CD player) or CD changer mode
Controls
continue to hold it in for
without ejecting the disc.The
indication
approximately 2 seconds. The pre-
set numberwill appear on the display
panel (accompanied by a beep)
indicating that the station is now set
into that pre-set memory position. The
station can now be recalled at any time
by pressing that button.
will remain on the display panel to show that
the CD player or changer is operating. Press
the button again to return to CD player mode
and resume play of the disc from the
beginning of the current track.
bu
DISC SLOT
With the front panel in the fold-down position,
gently insert the disc into the slot (label
surface facing up) until the soft-loading
mechanism engages and pulls the disc in.
The S--CDP indication will appear on the
4. Repeat the above procedure for the
remaining 5 pre-sets on that band and
for the other 3 bands on the unit.
br
VACUUM FLOURESCENT DISPLAY
(VFD)
display panel for 5 seconds. The (
)
indication illuminates and becomes
The Vacuum Fluorescent Display (VFD)
panel displays the frequency, time, and
activated functions using one of three
animated, the
symbol lights, and the track
8
number and elapsed time will appear on the
display panel.
128-6003A
9 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: This unit is designed for play of
standard 5" (12cm) compact
discs ONLY. Do not attempt to
use 3" (8cm) CD-Singles in this
unit, either with or without an
adapter, as damage to the player
and/or disc can occur. Such
damage will not be covered by
the Warranty on this product.
resume from the point it was stopped and
S--PAUSE will disappear.
co
TRACK SCAN SELECTOR (SCN)
During disc play, press this button to play
the first 10 seconds of each track on the
disc (S--SCAN) will appear on the display
panel). When a desired track is reached,
press the SCN button again to cancel the
function (S--SCAN will disappear from the
display panel) and play of the selected track
will continue.
cl
TRACK SELECT (
/
)
The Track Select function of the TUNE/
SEEK/TRACK buttons are used to quickly
access the beginning of a particular track
when a disc is in play. Each time the Forward
canceled by activating the Repeat Play
or Shuffle Play functions.
Scan mode will also cbpe
,
cq
cp
REPEAT PLAY SELECTOR (RPT)
TRACK Select (
) side of the button is
During disc play, press this button to repeat
the play of the selected track (S--RPT will
appear on the display panel). Play of the
track will continue to repeat until the button
is pressed again and the S--RPT indication
disappears from the display panel. Repeat
Play mode will also be canceled by activating
pressed, the next higher track number will
be selected as shown on the display panel.
Similarly, each time the Backward TRACK
Select (
) side of the button is pressed,
the next lower track number will be selected
as shown on the display panel.
cm
CUE/REVIEW FUNCTIONS
the Track Scan
co
or Shuffle Play
cq
(
/
)
fcuqnctions.
SHUFFLE PLAY SELECTOR (SHF)
High-speed audible search to any section
of the disc can be made by the Cue and
Review functions. Press and hold the Cue
During disc play, press this button to play the
tracks on the disc in a random shuffled order
(S--SHF will appear on the display panel). In
Shuffle Play mode, the TRACK Select function
will also select tracks in the random order instead
ofthenormalprogression. TheShufflePlaymode
can be canceled by pressing the button again
(S--SHF indication will disappear from the display
(
) button to advance rapidly in the
forward direction (the advancing disc playing
time will be shown on the display panel),or
the Review (
) button to advance rapidly
in the backward direction (the decreasing
disc playing time will be shown on the
display panel). During either function, the
elapsed time within each track will
automatically be shown on the display panel.
cp
or
Track Scan
panel) or by caoctivating the Repeat Play
functions.
cr
DISC SELECT UP/DOWN
(D.UP/D.DN)
These buttons are used to select the desired
disc for play during optional CD changer opera-
tion. To advance to a higher number disc, press
cn
DISC PAUSE (PAU)
The Pause function is used to pause disc
play, whether it be the CD Player or the optional
CD Changer; S--PAUSE will appear on the
display. When pressed again, disc play will
9
128-6003A
10 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
the D.UP button, and to return to a lower num-
ber disc, press the D.DN button. The number of
the disc in play will be shown on the display
panel.
dl
THEFT-DETERRENT LED
Located on the chassis behind the front
panel, a light-emitting diode (LED) will flash
when the panel is physically removed. The
flashing light serves as a visual warning to
the would-be thief that the unit has been
disabled by removal of the front panel.
cs
DISC EJECT (
)
Disc play is stopped and the disc is ejected
when the front panel is folded down and this
button on the rear of the panel is pressed.
Radio operation will automatically resume. If
the disc is not removed from the unit within
15 seconds of being ejected, it will
automatically be re-loaded into the unit to
prevent it from being accidentally damaged
dm
RESET BUTTON
The RESET button is located above and to
the right of the theft deterrent LED. The reset
circuitry should only be activated under the
following circumstances as it will erase the
time and pre-set memories:
(
will appear on the display panel to
1.Upon initial installation after all wiring is
completed.
2.If there is a malfunction of any of the
switches on the unit, pressing the RESET
button may clear the system and return
to normal operation.
indicate that a disc is loaded in the player).
Play of the disc can be resumed by using
the MODE button btto choose the CD player
function.
ct
TIME/FREQUENCY SELECTOR (T/F)
During radio, CD Player or optional CD
Changer operation, press this button to call
the time display on the incorporated quartz
clock. The current time will appear together
with an A or P indication. The display will
return to the radio frequency indication after
5 seconds.
dn
FRONT PANEL RELEASE BUTTON
(OPEN)
This button is used to release the
mechanism that holds the front panel to the
chassis. To detach the front panel, press
the button so that the panel drops to the
lowered position. Grasp the panel at the
middle and pull it off of the chassis mounting
plate. To re-attach the panel, press it straight
onto the chassis mounting plate until the
mechanism locks it into place.
cu
EQUALIZER BUTTON (EQ)
The EQ button applies preset sound effects
to the unit’s audio output signal.The EQ
button, when pressed, will activate one of
five operating modes (CLASSICS, POP,
JAZZ, DSP OFF or FLAT). Even though the
Equalizer function is active, as displayed
on the panel, if the bass and/or treble level
is set, the Equalizer function automatically
returns to the FLAT mode. Conversely, when
the Equalizer function is not active, the unit
returns to the user set bass and treble levels.
do
REMOTE SENSOR
The sensor to detect the infrared signal from
the wireless remote control is located behind
the VFD display lens. For optimum operation
of the remote control, always aim the control
at the VFD display.
10
128-6003A
11 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES ON USE OF FRONT PANEL:
1. Make sure the front panel is positioned
correctly when attaching it to the chassis
as it cannot be attached when up-side
down. Use modeate pressure to fully seat
the panel into position.
DISC SLOT
(19)
RESET BUTTON
(31)
THEFT DETERRENT
LED (30)
2.To verify correct panel installation, swing the
panel assembly up into position until it locks
easily into place. If any resistance is
encountered, re-check panel opientation in
chassis mounting plate.
MOUNTING PLATE
GUIDE (2 PLACES)
CD EJECT
BUTTON (27)
FRONT PANEL
3.When taking the front panel with you,
please use the supplied carrying case to
protect the panel from dirt and damage.
Make sure there is no dust or dirt on the
electrical terminals on the back of the
panel as this could cause intermittent
operation or other malfunctions.
PANEL
MOUNTING
PLATE
SETTING THE CLOCK
1. Switch the vehicle ignition and radio “on”.
2. Press the Time/Frequency (T/F) button to call the time display.
3. Within 10 seconds, press and hold the T/F button until a single beep sounds and the
time display flashes.
4. With the display flashing, press the Up TUNE/SEEK/TRACK (
) button to adjust
) button to
the hours and A/P indication, or the Down TUNE/SEEK/TRACK (
adjust the minutes to the correct time.
5. Five seconds after the last hour or minute adjustment is made, the time will be set in
the unit and the display will return to the normal indication.
CD PLAYER ERROR CODES
If a problem should develop while operating the CD player, an error code (ER-1, ER-2,
ER-3, etc.) may appear on the display panel. This can indicate a number of problems
with the unit, including a mechanical error or an error in the microprocessor control of the
player. If an error code should appear, try ejecting and re-loading the disc into the player.
While the disc is out of the unit, make sure it is clean, undamaged, and loaded correctly
(label surface up). You may also try activating the RESET button dmon the unit, but this
will also erase the time and pre-set memories.
11
If the suggested measures do not solve the problem, contact an approved warranty
station near you for further assistance.
128-6003A
12 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Size:
7" W
x 2" H x 6-5/16" D
178 mm x 50 mm x 160 mm
Operating Voltage:
Fuse Ratings:
12 volts DC, negative ground
Constant (Yellow wire): 15 AMP.
Switched (Red wire): 0.5 AMP.
Output Power:
Output Wiring:
160 watts maximum
(40 watts x 4 channels)
Floating-ground type designed for 4 speaker use.
Front and rear channels CANNOT be combined
(bridged) for use with 2 speakers.
RCA low-level outputs (front and rear channels).
Output Impedance:
Low-Level Output:
Tuning Range:
Compatible with 4 – 8 ohm speakers.
500 mv.
AM: 530 – 1,720 kHz. (10 kHz. step)
FM: 87.5 – 107.9 MHz. (200 kHz. step)
Sensitivity:
AM: 20 uv.
FM: 1.5 uv.
FM Stereo Separation:
CD Frequency Response:
CD Signal/Noise Ratio:
CD Channel Separation:
CD Distortion:
>20 dB
17 – 20 kHz. +0/-3 dB
>65 dB
>60 dB
0.2%
*Specifications are subject to change without notice.
CD-R AND CD-RW PLAYBACK CAPABILITY
This model can play most CD-R and CD-RW media that contains audio programs.
Playback of both CD-R and CD-RW depends on the conditions of the recording equip-
ment and the CD-R or CD-RW disc quality. In some cases, a CD-R or CD-RW disc
cannot be played on this unit.
12
128-6003A
13 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
higher track number will be selected as
shown on the display panel. Similarly, each
CD CHANGER CONTROLS
Built into this radio are controls to operate
an optional CD changer. Please check with
your Rampage/Audiovox car stereo
specialist or call 1-800-645-4994 for
recommendations of the models that will
work with this radio.
time the Backward Track Select (
)
button is pressed, the next lower track
number will be selected as shown on the
display panel.
ds
CUE/REVIEW FUNCTIONS(
High-speed audible search to any section of
the disc can be made by the Cue and Review
/
)
Adjustment of the audio functions (volume,
tone, balance, and fader) for the CD changer
operate in the same manner as they do for
radio play. The following controls will operate
the CD changer when it is installed and
connected to this radio. Refer to the owner’s
manual included with the CD changer for
instructions on the installation and correct
functions. Press and hold the Cue (
) side
of the button to advance rapidly in the forward
direction (disc play symbol rotation on the
display panel will increase) or the Review
(
) side of the button to advance rapidly
idntthe backward direction.
TRACK/DISC SCAN SELECTOR
ldopading and use of the CD magazine.
CD CHANGER MODE SELECTOR
(SCN)
(MODE)
When the SCN button is pressed, the SCN
indication will appear on the display panel,
and the first 10 seconds of each track on
the disc will be played in order. When a
desired track is reached, press the SCN
button again and play of the selected track
will continue (SCN will disappear from the
display panel). The Track Scan mode will
also be canceled by activating the Repeat
or Shuffle Play function.
When the Scan button is pressed and
held for more than 2 seconds, the DSN
indication will appear on the display panel
with the disc number, and the first 10 seconds
of the first track on each disc in the magazine
will be played. When a desired disc track is
reached, press the SCN button again and
play of the selected disc will continue (DSN
will disappear from the display panel, and
be replaced by CDC and the disc/track
number). The Disc Scan mode will also be
canceled by activating the Repeat or Shuffle
Play function.
During radio or CD play, press this button
to select operation of the CD changer as
shown by CDC on the display panel. Disc
play will begin and the disc and track
number will be shown on the display panel.
When the magazine is loaded into the
changer, play will begin from the first track
of the first disc in the magazine.
dq
DISC SELECT (D.UP/D.DN)
These buttons are used to select the desired
disc for play. To advance to a higher number
disc, press the D.UP button. To return to a
lower number disc, press the D.DN button.
The number of the disc in play will be shown
on the display panel.
dr
TRACK SELECT (
/
)
The Track Select functions are used to
quickly access the beginning of a particular
track. Each time the Forward Track Select
13
(
) side of the button is pressed, the next
128-6003A
14 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
and the tracks on the disc will be played in
a random, shuffled order. The Track Select
button will also select tracks in the shuffled
order instead of the normal progression. The
Shuffle Track mode can be canceled by
pressing the SHF button again or by
activating the Scan or Repeat Play
functions.
When the SHF button is pressed and held
for at least 2 seconds, the DSF indication
will appear on the display panel and the discs
in the magazine will be played in a random,
shuffled order, as well as the tracks on each
disc. After playing the tracks at random from
a disc in the magazine, the unit will select
another disc at random and play all the
tracks on it in a random shuffled order. This
will continue from disc-to-disc until the
Shuffle Disc mode is canceled by pressing
the SHF button again or by activating the
Scan or Repeat Play functions.
du
DISC/TRACK REPEAT PLAY (RPT)
When the RPT button is pressed, the RPT
indication will appear on the display panel
and play of the selected track will be
continually repeated until the Track Repeat
mode is canceled by pressing the RPT
button again or by activating the Scan or
Shuffle Play functions.
When the RPT button is pressed and held
for more than 2 seconds, the DRT indication
will appear on the display panel and play of
the selected disc will be continually repeated
until the Disc Repeat mode is canceled by
pressing the RPT button again or by
activating the Scan or Shuffle Play
feulnctions.
DISC/TRACK SHUFFLE PLAY (SHF)
When the SHF button is pressed, the SHF
indication will appear on the display panel
CD CHANGER ERROR CODES
If a problem should develop while operating the CD changer, the following error codes may
appear on the display panel.
ER-1: Indicates that there is no magazine loaded in the CD changer.
ER-2: Indicates a problem with the magazine eject function.
ER-3: Indicates an error in the disc loading function.
ER-4: Indicates an error in the disc un-loading function.
ER-5: Indicates an error in the magazine position.
ER-6: Indicates an error in the laser pick-up position.
ER-7: Indicates an error in the laser focus on the disc.
In any of the above situations, try ejecting the CD magazine from the changer and make
sure the discs are clean, undamaged, and loaded correctly (refer to the Owner’s Manual
try activating the RESET button
memories.
of the CD changer). Re-load thedmmagazine and check for proper operation. You may also
on the unit, but this will also erase the time and pre-set
14
If the suggested measures do not solve the problem, contact an approved warranty station
near you for further assistance.
128-6003A
15 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
8
9
bl
TRACK/DISC REPEAT (RPT) - See
Main Unit cpand du.
WIRELESS REMOTE
CONTROL OPERATION
RADIO PRE-SET MEMORY 1-6 - See
The wireless remote control supplied with this
model is capable of operating most of the
features of the unit from a remote location.
Each button on the remote control functions
in the same way as the referenced button on
the main unit. For optimal operation of the
Main Unit
bq
DISC UP SELECT (D.UP) - See
Main Unit cr.
mote Sensor
main unit.
remote controld, aolways aim it toward the Re-
on the front panel of the
2
1
3
1
2
PWR ON/OFF - See Main Unit
1
.
INFRARED SENDER - Emits infrared
signal to radio which is detected by the
sensor do.
MODE
OWER
4
5
6
SEL
S
17
16
T/F
B
A
N
D
3
4
5
Main Unit
bt
and
MODE SELECTOdRp(MODE) - See
.
TIME/FREQUENCY (T/F) SET – See
Main Unit ct.
AM/FM BAND SELECTOR (BAND)
– See Main Unit bl.
7
8
AS/PS
15
14
PAU
SCN
RPT
6 bUmP/DOWN TUNING – See Main Unit
1
2
3
.
9
SHF
D.DN
D.UP
AUTOMATIC SEEK TUNING – See
Main Unit bm.
CclDaTnRdAdCrK. SELECT – See Main Unit
CcmDaCnUdE/dRsE. VIEW – See Main Unit
4
5
6
13
12
10
INFRARED REMOTE
CONTROLLER
7
Main Unit
co
and
TRACK/DISC SCdAtN (SCN) - See
.
15
11
128-6003A
16 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
bm
BATTERY COMPARTMENT - Holds
two AAA batteries for remote wire-
less control operation.
bq
(AS/PS)- See Main Unit
AUTO STORE/PRESbEpT SCAN
.
br 3 4
2
,
,
AUDIO5CONTROL- See Main Unit
,
6, and
7
except press
bn
bo
bp
DISC DOWN ScErLECT (D.DN) -
.
VOL + to increase level, and press
See Main Unit
VOL - to decrease level.
TRACK/DISC SHUFFLE (SHF) - See
Main Unit cqand el.
PAUSE (PAU) - See Main Unit cn.
bs
Unit
3
,
4
,
SELECT BU5TTON (SEL) - See Main
,
6, and
7
.
CAREANDMAINTENANCE
The radio section of your new sound system does not require any maintenance. We
recommend you keep this manual for reference on the many features found in this unit as
well as how to set the clock.
The compact disc player section also requires no routine maintenance, but proper
understanding of its use and handling will help you obtain maximum enjoyment of its
capabilities. The following points should be observed:
l When cleaning the interior of the vehicle, do not get water or cleaning fluids on the unit.
l The CD player is a precision instrument and will not operate properly in extreme hot or
cold. Incaseofsuchconditions,waituntiltheinteriortemperatureofthevehiclereaches
a normal temperature before using the player.
l Ifthetemperatureinsidetheplayergetstoohot,aprotectivecircuitwillautomaticallystop
playofthedisc. Inthiscase, allowtheunittocooloffbeforeoperatingtheplayeragain.
l Never insert anything other than a 5" (12 cm) compact disc into the player as the
mechanism can be damaged by foreign objects.
l Do not attempt to use 3" (8 cm) CD-Single discs in this unit, either with or without an
adaptor, as damage to the player and/or disc may occur. Such damage will not be
covered by the Warranty on this product.
l When not using the disc player, always remove the compact disc.
16
128-6003A
17 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
l Whenthevehiclewarmsupduringcoldweatherorunderdampconditions,moisturemay
condense on the lens of the disc player. Should this occur, the player will not operate
properlyuntilthemoisturehasevaporated.
l TheunitisdesignedwithavibrationdampeningCDmechanismtominimizeinterruptionof
discplayduetonormalvibrationinamovingvehicle. Whendrivingonveryroughroads,
however, occasional sound skips may occur. This will not scratch or damage the disc
and normal play will resume when the rough conditions cease.
HANDLING COMPACT DISCS
Dirt, dust, scratches, and warpage can cause skips in the playback and deterioration of
sound quality. Please follow these guidelines to take care of your compact discs:
l Use only compact discs with the mark:
l Fingerprints,dust,anddirtshouldbecarefullywipedoffthedisc’splayingsurface(shiny
side)withasoftcloth. Wipeinastraightmotionfromtheinsidetotheoutsideofthedisc.
l Never use chemicals such as record sprays, household cleaners or thinner to clean
compact discs. Such chemicals can irreparably damage the disc’s surface.
l Discs should be kept in their storage cases when not in use.
l Do not expose discs to direct sunlight, high temperatures or high humidity for extended
periods.
l Do not stick paper, tape, or labels on the disc surfaces nor write on them with any type
ofmarker.
17
128-6003A
18 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
12 MONTH LIMITED WARRANTY
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of
this product that should this product or any part thereof, under normal use and conditions,
be proven defective in material or workmanship within 12 months from the date of original
purchase, such defect(s) will be repaired or replaced with new or reconditioned product
(at the Company's option) without charge for parts and repair labor.
To obtain repair or replacement within the terms of this Warranty, the product is to be
delivered with proof of warranty coverage (e.g. dated bill of sale), specification of
defect(s), transportation prepaid, to the warranty center at the address shown below.
This Warranty does not extend to the elimination of car static or motor noise, to correction
of antenna problems, to costs incurred for installation, removal, or reinstallation of the
product, or damage to tapes, compact discs, speakers, accessories, or vehicle electrical
systems.
This Warranty does not apply to any product or part thereof which, in the opinion of the
Company, has suffered or been damaged through alteration, improper installation,
mishandling, misuse, neglect, accident, or by removal or defacement of the factory serial
number/bar code label(s). THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS
WARRANTYISLIMITEDTOTHEREPAIRORREPLACEMENTPROVIDEDABOVEAND,
INNOEVENT,SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE
PAID BY PURCHASER FOR THE PRODUCT.
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED
WARRANTIES,INCLUDINGANYIMPLIEDWARRANTYOFMERCHANTABILITY,SHALL
BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY. ANY ACTION FOR
BREACHOFANYWARRANTYHEREUNDERINCLUDINGANYIMPLIEDWARRANTYOF
MERCHANTABILITY MUST BE BROUGHT WITHIN A PERIOD OF 30 MONTHS FROM
DATEOFORIGINALPURCHASE. INNOCASESHALLTHECOMPANYBELIABLEFOR
ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY
OTHERWARRANTY,EXPRESSORIMPLIED,WHATSOEVER. Nopersonorrepresentative
is authorized to assume for the Company any liability other than expressed herein in
connection with the sale of this product.
Some states do not allow limitations on how long an implied warranty lasts or the
exclusion or limitation of incidental or consequential damage so the above limitations
or exclusions may not apply to you. This Warranty gives you specific legal rights and you
may also have other rights which vary from state to state.
U.S.A.: AUDIOVOX CORPORATION, 150 MARCUS BLVD., HAUPPAUGE, NY 11788 l1-800-645-4994
CANADA: CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION SERVING YOUR AREA
18
128-4270E
128-6003A
19 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
© 2001 Audiovox Electronics Corp., Hauppauge, NY 11788
Printed in China
128-6003A
128-6003A
20 of 20
Download from Www.Somanuals.com. All Manuals Search And Download.
|