Airlink101 Network Router AR670W User Manual

150N Draft 802.11n Wireless Router  
Model # AR670W  
Quick Installation Guide  
Ver. 1A  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 2  
Verifying Connection to the Router  
Step 1 Go to Start, Run, type command (for Windows 95/98/ME) or cmd (for Windows  
2000/XP) and click OK. You will see the command prompt as below.  
Step 2 Type ping 192.168.1.1 and press Enter. You should get four reply responses back.  
Step 3 If you get Request timed out, or Destination host unreachable, double-check the  
network cable connection between the computer and the router and try Step 2 again. If you  
still encounter problem, go to the next step; otherwise proceed to Section 3, Configuring the  
Router.  
Step 4 For Windows 2000/XP, type ipconfig/release and press Enter. (Windows 98se/ME  
skip to Step 6)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 5 Type ipconfig/renew and press Enter. You should get an IP address of 192.168.1.x  
(where x is a number between 2 - 254). Proceed to Section 3, Configuring the Router. If  
you don’t get an IP address, reset the router by holding in the reset button on the back of the  
router for 10 seconds while it is ON and try ipconfig/renew again.  
Step 6 For Windows 95/98/ME go to Start, Run, type winipcfg and click OK. (Not  
necessary for Windows 2000/XP Users)  
Step 7 Select your network card from the drop-down menu and click Release.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 8After your IP address is released, click Renew. You should get an IP address of  
192.168.1.x (where x is a number between 2 - 254). If you don’t get an IP address, reset  
the router by holding in the reset button on the back of the router for 10 seconds while it is ON  
and try Renew again.  
Section 3  
Configuring the Router  
Step 1 Open a web browser (Internet Explorer) and type 192.168.1.1 in the URLAddress field  
and press Enter.  
Step 2 Enter admin for both username and password fields and click OK.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 Select the proper region, North America or South America, and click Apply.  
Warning: Incorrectly selecting the current region of operation may result in illegal operation  
and may cause harmful interference to other systems. You can refer to the user manual on the  
provided CD for more details.  
Cable Modem  
For most cable modem users, you should be able to connect to the Internet without any  
configuration. If your ISP has provided you with a host name, enter it in the optional Host  
Name field.  
Click on the Clone MAC Address button. Click Apply and OK to save the settings.  
Go to the Status tab, Internet connection section to verify that you are getting valid IP  
address information. If you have trouble connecting to the Internet, please go through the  
Troubleshooting section at the end of this installation guide.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DSL  
For DSL users, follow the steps below to configure the router.  
Step 1 Select PPPoE from the drop-down menu.  
Step 2 Enter your username and password provided by your ISP.  
Note: Depending on the ISP, you may need to include the domain name with your username.  
Example:  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 3 Click Apply and OK to save the setting.  
Go to the Status tab, Internet connection section to verify that you are getting valid IP  
address information. If you have trouble connecting to the Internet, please go through the  
Troubleshooting section at the end of this installation guide.  
Section 4  
Connecting the Router Wirelessly  
Below are the default wireless settings of the router. You must configure your wireless network  
card to the same settings in order to establish a wireless connection to the router. Please refer  
to your wireless network card’s manual on how to configure these settings.  
SSID: default  
Operating Mode: Infrastructure  
Authentication: Open System  
Channel #: 6  
WEP: disabled  
If you want to change the router’s wireless settings, log in to the router and select the  
Wireless tab. Be sure to click Apply and OK to save the settings.  
For information on changing the router’s log in password and enabling wireless encryption,  
please refer to the User’s Manual on the provided CD.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 5 (Optional)  
Wi-Fi Protected Setup  
Wi-Fi Protected Setup™ (WPS) is a new and easy way to configure the encryption for your  
wireless network clients. In order to use it with your router, firstly, you must configure the  
wireless encryption on the router. You can find instructions for configuring it in the User Manual  
located on the CD that came with your router. Secondly, you will need to have wireless  
adapters that support this feature. If your wireless adapters do not support WPS, you will need  
to set up the wireless security manually and you can skip this section.  
In the instructions below, we are going to use the utility, Wireless Monitor that comes with the  
Airlink101 300N or 150N Wireless Adapters (AWLC6070, AWLC6080, AWLH6070,  
AWLH6080, AWLL6070, andAWLL6080) as the example.  
Step 1 Go to the computer with theAirlink101 150N wireless adapter and open the Wireless  
Monitor. UnderAP List, click on the wireless network you want to connect to and click on the  
WPS Connect button.  
download the latest utility and driver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 2 Choose your configuration method, either Push Button or Pin Code, and click Next.  
Step 3a Write down the PIN if you choose Pin Code method and click Next.  
Step 3b If you choose Push Button method, click on the Wi-Fi Protected Setup button.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Step 4 Go to your routers configuration screen and click on Wireless. Then click Wireless  
security. Make sure that the Wi-Fi Protected Setup Enable box is checked. Then click the  
Add Wireless Device Wizard button.  
If you are using Pin Code method, enter the Pin Code in the Pin Number box and click  
connect. If you are using Push Button method, click on Virtual Push Button or the physical  
push button on the router.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
After a few moments both the router configuration screen and the adapter configuration screen  
should show a message telling you that you are connected.  
Step 5 Click Finish on the adapter screen.  
Step 6 Click Continue on the router configuration screen.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 6  
Troubleshooting  
If you have trouble connecting to the Internet, try the following steps.  
Step 1 Power off the Cable/DSL modem, router, and computer and wait for 5 minutes.  
Step 2 Turn on the Cable/DSL modem and wait for the lights on the modem to settle down.  
Step 3 Turn on the router and wait for the lights on the router to settle down.  
Step 4 Turn on the computer.  
Step 5 Reconfigure the router as described in Section 3.  
Step 6 Log in to the router and select the Status tab.  
Step 7 Verify that the IP Address, Default Gateway, and at least one of the DNS fields  
have valid numbers assigned to them (instead of all 0’s).  
If each field has a valid number assigned, the router is connected to the Internet.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 7  
Technical Support  
Toll Free: 1-888-746-3238  
*Theoretical maximum wireless signal rate derived from IEEE 802.11g standard and IEEE 802.11n draft specification version 2.0. Actual  
data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and  
construction, mix of wireless products used, radio frequency interference (e.g., cordless telephones and microwaves) as well as  
network overhead lower actual data throughput rate. Specifications are subject to change without notice. All products and trademarks  
are the property of their respective owners. Copyright ©2008 AirLink101®  
®
Download from Www.Somanuals.com. All Manuals Search And Download.  

3Com Gas Grill FSSBID 100 User Manual
3M Sander 51210 User Manual
Acer Projector P7280I User Manual
ACP EP Memory Camera Accessories EPCF 128 User Manual
Agilent Technologies Network Router 20ES User Manual
Aiphone Speaker System LAF 10S User Manual
Amana Range Coil User Manual
ATN Binoculars Aries 390 User Manual
Avenview Switch SPLIT HDSDI 4 RS User Manual
BC Speakers Portable Speaker DE 82 User Manual