Avenview Switch SPLIT HDSDI 4 RS User Manual

4 Port HD/SD-SDI Splitter with  
Reclocking  
User’s Guide  
Models  
SPLIT-HDSDI-4-RS  
© 2008 Avenview Inc. All rights reserved.  
The contents of this document are provided in connection with Avenview Inc. (“Avenview”) products. Avenview makes no representations  
or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to  
specifications and product descriptions at any time without notice. No license, whether express, implied, or otherwise, to any intellectual  
property rights is granted by this publication. Except as set forth in Avenview Standard Terms and Conditions of Sale, Avenview assumes  
no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied  
warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.  
Reproduction of this manual, or parts thereof, in any form, without the express written permission of Avenview Inc. is strictly  
prohibited.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Section 1: Getting Started  
1.1 Important Safeguards  
Please read all of these instructions carefully before you use the device. Save this manual for future  
reference.  
What the warranty does not cover  
Any product, on which the serial number has been defaced, modified or removed.  
Damage, deterioration or malfunction resulting from:  
Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized  
product modification, or failure to follow instructions supplied with the product.  
Repair or attempted repair by anyone not authorized by us.  
Any damage of the product due to shipment.  
Removal or installation of the product.  
Causes external to the product, such as electric power fluctuation or failure.  
Use of supplies or parts not meeting our specifications.  
Normal wear and tear.  
Any other causes which does not relate to a product defect.  
Removal, installation, and set-up service charges.  
1.2 Safety Instructions  
The SPLIT-HDSDI-4-RS, 4 Port HD/SD-SDI splitter with reclocking has been tested for conformance to safety  
regulations and requirements, and has been certified for international use. However, like all electronic  
equipments, the SPLIT-HDSDI-4-RS should be used with care. Read the following safety instructions to protect  
yourself from possible injury and to minimize the risk of damage to the unit.  
Do not dismantle the housing or modify the module.  
Dismantling the housing or modifying the module may result in electrical shock or burn.  
Refer all servicing to qualified service personnel.  
Do not attempt to service this product yourself as opening or removing housing may expose you to  
dangerous voltage or other hazards  
Keep the module away from liquids.  
Spillage into the housing may result in fire, electrical shock, or equipment damage. If an object or liquid  
falls or spills on to the housing, unplug the module immediately.  
Have the module checked by a qualified service engineer before using it again.  
Do not use liquid or aerosol cleaners to clean this unit. Always unplug the power to the device before  
cleaning.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
1.3 Regulatory Notices Federal Communications Commission (FCC)  
This equipment has been tested and found to comply with Part 15 of the FCC rules. These limits are designed  
to provide reasonable protection against harmful interference in a residential installation.  
Any changes or modifications made to this equipment may void the user’s authority to operate this  
equipment.  
1.4 Introduction  
The Avenview SPLIT-HDSDI-4-RS receives one SDI input, perfectly duplicates it, and re-transmits four SDI  
outputs for real time multi-viewing. It is a reliable video device splitting a SDI or HD-SDI video source to four  
HD-SDI or SD-SDI displays at the same time.  
1.5 Features  
-
-
-
-
-
-
-
-
HD/SD dual-rate distribution  
Four separately buffered outputs  
HD cable equalization (Beldon 1694A)  
Dual color LED indication of input lock and rate  
Pass all ancillary data  
Provides automatic input cable equalization up to 300m (1000ft)  
Inter-locked power supply for better fixedness  
Reclocking SDI signals for cascading and longer transmission  
1.6 Package Contents  
Before you start the installation of the converter, please check the package contents.  
-
-
-
SPLIT-HDSDI-4-RS  
Power Adapter (+5VDC)  
User’s Manual  
x 1  
x1  
x1  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
1.7 Before Installation  
Put the product in an even and stable location. If the product falls down or drops, it may cause an  
injury or malfunction.  
Don’t place the product in too high temperature (over 50°C), too low temperature (under 0°C) or high  
humidity.  
Use the DC power adapter with correct specifications. If inappropriate power supply is used then it  
may cause a fire.  
Do not twist or pull by force ends of the optical cable. It can cause malfunction.  
1.8 Panel Description  
FRONT PANEL  
1. HD/SD-SDI Input  
2. LED Reserved  
3. LED Power Indicator  
4. 5V DC Power Jack  
REAR PANEL  
5. HD/SD-SDI Output 1  
7. HD/SD-SDI Output 3  
6. HD/SD-SDI Output 2  
8. HD/SD-SDI Output 4  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Bottom Panel  
PIN 1 - OFF  
PIN 1 - OFF  
PIN 1 ON  
PIN 2 OFF  
PIN 2 ON  
PIN 2 OFF  
Auto rate detect (143 Mbps rate operation supported only in ARD mode)  
270 Mbps  
1483 / 1485 Mbps  
PIN 3 - OFF  
PIN 3 - ON  
PIN 4 - OFF  
Automatically reclocks bypassed SDI signals  
For to bypass SDI signal  
Default Operation mode  
Section 2: Installation  
Follow these instructions for installation of SPLIT-HDSDI-4-RS:  
1. Ensure SPLIT-HDSDI-4-RS and all other source devices are turned off  
2. Connect a camera or other HD/SD-SDI device to Input of SPLIT-HDSDI-4-RS  
3. Connect devices equipped with HD/SD-SDI inputs (e.g. monitors or video processors) to  
SPLIT-HDSDI-4-RS outputs  
4. Turn ON all devices connected to output of SPLIT-HDSDI-4-RS  
5. Plug power adapter to 5V DC power jack of SPLIT-HDSDI-4-RS  
HD/SD-SDI Camera  
SPLIT-HDSDI-4-RS  
4 HD/SD-SDI Displays  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Section 3: Specifications  
Item  
Description  
SPLIT-HDSDI-4-RS  
Model  
SD-SDI & HD-SDI  
Yes  
SDI Standards  
Auto HD/SD-SDI Detection  
Supported Protocols  
Video Bandwidth  
Data Rates  
SMPTE 259M, SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)  
[1.485Gpbs & 1.485/1.001Gbps]  
270 / 1483 / 1485 Mbps  
[HD] 720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60, 1080p24/30  
[SD] [email protected], PAL@50Hz  
Supported Video  
SMPTE-292M, SMPTE-259M  
SDI signal type  
Output impedance  
Reclocking function  
Cable equalization  
Audio support  
75  
Yes  
[HD-SDI] up to 150m (500ft) / [SD-SDI] up to 300m (1000ft)  
Yes  
RP-918 pathological  
patterns  
Immune  
1x BNC [SDI]  
4x BNC [SDI]  
Input Connectors  
Output Connectors  
BNC connector  
75inter-locked socket  
Amplitude: Within 800mV ±3% (<10%)  
Rise overshoot: Less than 2% (<10%)  
Fall overshoot: Less than 2% (<10%)  
Long time jitter: 0.195μ (<1.0μ)  
Timing jitter: 0.195μ (<1.0μ)  
Eye pattern characteristics  
Alignment jitter: 0.127μ (<0.2μ)  
5.7” x 3.2” x 1” (L x W x H)  
305g  
Dimensions  
Weight  
5V 4A DC  
Power Supply  
10 Watts (max)  
Power Consumption  
Operating Temperature  
Storage Temperature  
Relative Humidity  
0~40°C [32~104°F]  
-20~60°C [-4~140°F]  
20~90% RH [no condensation]  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Disclaimer  
While every precaution has been taken in the preparation of this document, Avenview Inc. assumes no liability with respect to the  
operation or use of Avenview hardware, software or other products and documentation described herein, for any act or omission of  
Avenview concerning such products or this documentation, for any interruption of service, loss or interruption of business, loss of  
anticipatory profits, or for punitive, incidental or consequential damages in connection with the furnishing, performance, or use of the  
Avenview hardware, software, or other products and documentation provided herein.  
Avenview Inc. reserves the right to make changes without further notice to a product or system described herein to improve reliability,  
function or design. With respect to Avenview products which this document relates, Avenview disclaims all express or implied warranties  
regarding such products, including but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and  
non-infringement.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  

Acer Computer Monitor PD725P User Manual
Acer Laptop Docking Station EasyPort III User Manual
Agilent Technologies Network Card N2620A User Manual
AKG Acoustics Microphone HT 40 PRO User Manual
Alpine Radio CDE HD138BT CDE HD137BT User Manual
Atomic Scuba Diving Equipment 12 0102 3P User Manual
Axis Communications Security Camera P1353 User Manual
Barco Automobile Accessories 5MP1HM User Manual
Behringer Musical Instrument Amplifier BT108 User Manual
Behringer Stereo Amplifier BG412V User Manual