Package Contents
Before you begin the installation, please check the items of your package:
•
•
•
•
•
Wireless N 300 Multi-Function Access Point
Power Adapter
Ethernet Cable (Cat.5)
Setup CD
Quick Installation Guide
Quick Installation Guide
Wireless N 300 Multi-Function Access Point
with 5-Port Switch
Section 1
This Quick Installation Guide only provides basic instructions. For detailed
information on using this product, please refer to the User’s Manual on the
supplied CD.
Model # AP671W
Installing the Access Point
Step 1 Insert the Setup CD into your CD-ROM drive.
Ver. 1A
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 Configure the IP Address for your Access Point for future
management use. Click Next.
Step 8 Configure the settings for the operation mode you have selected.
8.1 Access Point
Configure the SSID and Channel Number if you have selected Access Point
mode. Click Next.
Step 7 Select an operation mode for your Access Point and click Next. The
wizard will guide you to finish the following corresponding settings.
Download from Www.Somanuals.com. All Manuals Search And Download.
8.2 Universal Repeater
8.4 Point-to-Point / Point-to-MultiPoint / WDS Bridge
Click on Site Survey, select the wireless router or AP you wish to repeat on
the popup Wireless Site Survey window and click Connect.
Configure a network name in Main SSID for the repeater to be identified.
Same setup procedure applies to Point-to-Point Bridge, Point-to-MultiPoint
Bridge and WDS Bridge modes. For bridge mode, you need at least two
Access Points. We will use Point-to-Point Bridge as an example.
Select a channel number you wish to use and enter the MAC address of the
other Access Point for the bridge. Click Next.
8.3 AP Client
Step 9 Configure the wireless security settings. It is recommended to use
WPA2-PSK(AES) which is the most secured encryption for general users.
Click on Site Survey, select the wireless router or AP you wish to connect
on the popup Wireless Site Survey window and click Connect, or enter your
wireless network’s SSID manually. Click Next.
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 10 Verify the settings you have configured and click Restart.
Section 2
Technical Support
E-mail: [email protected]
Toll Free: 1-888-746-3238
Website: www.airlink101.com
Step 11 Click Finish to end the EZ Setup Wizard.
If you are using Bridge mode, you need to follow the same configuration
procedure on other Access Point(s).
*Theoretical maximum wireless signal rate derived from IEEE standard 802.11 specifications. Actual data
throughput will vary. Network conditions and environmental factors, including volume of network traffic,
building materials and construction, mix of wireless products used, radio frequency interference (e.g.,
cordless telephones and microwaves) as well as network overhead lower actual data throughput rate.
Compatibility with 802.11n devices from other manufacturers is not guaranteed. Specifications are subject to
change without notice. Photo of product may not reflect actual content. All products and trademarks are the
property of their respective owners. Copyright© 2010 Airlink101®
Congratulations! You have finished the configuration for your
Airlink101 Access Point.
Download from Www.Somanuals.com. All Manuals Search And Download.
|