COLONY™ 24"
PEDESTAL SINK
VITREOUS CHINA
COLONY™ 24" PEDESTAL SINK
• Vitreous china lavatory and pedestal
• Front overflow
• Fitting ledge with generous shelf area
• Supplied with mounting kit
Shown with 2385.060 Reliant faucet
(not included)
❏ 0113.411 Faucet holes on 4" (102mm) centers
(Illustrated)
❏ 0113.811 Faucet holes on 8" (203mm) centers
Nominal Dimensions:
23-3/4" x 20" x 35-1/4"
(603 x 508 x 895mm)
20-3/4"
(527mm)
Separate Components:
FINISHED
3-3/4"
5" (127mm) REF.
PEDESTAL/WALL
CLEARANCE
WALL
(95mm)
4"
(102mm)
❏ 0113.404 Pedestal top 4" (102mm) centers
❏ 0113.808 Pedestal top 8" (203mm) centers
❏ 731100-400 Pedestal only
5-1/2"
(140mm)
8"
(203mm)
PEDESTAL ANCHORING
SCREW HOLES
20"
(508mm)
Bowl sizes:
3/8" (10mm) DIA.
18-1/2" (470mm) wide
12-1/2" (318mm) front to back
5-1/2" (127mm) deep
1-3/4" DIA.
STD. DRAIN
OUTLET
PEDESTAL
BASE
23-3/4"
(603mm)
3/8" (10mm) DIA.
ANCHOR SCREW
HOLES ON
Compliance Certifications -
Meets or Exceeds the Following Specifications:
• ASME A112.19.2M for Vitreous China Fixtures
16"
(406mm)
1-1/4"
(32mm)
4-1/4"
(108mm)
S9 WALL-MT
HANGER
16" (406mm) CTRS
DRAIN
CHASE
5-1/2"
(140mm)
8"
(203mm)
8" (203mm)
5/16" (8mm) X 1-1/16" (27mm)
ANCHOR SCREW HANGER
MTG HOLES (2) ON
To Be Specified:
❏ Color: ❏ White ❏ Bone ❏ Linen ❏ Silver
❏ Faucet:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
4-1/2" (114mm) CTRS
SUPPLIES AS
REQUIRED
35-1/4"
(895mm)
28-1/4"
(718mm)
23"
1-1/4" O.D.
WASTE
1-1/4" O.D.
TAILPIECE
OPEN
TO
FLOOR
*
21"
*
(584mm)
(533mm)
ANCHOR SCREW
HOLES (2) 3/8"
(10mm) DIA. ON
4-3/4" (121mm)
CTRS
FINISHED
FLOOR
8"
(203mm)
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
▼ PEDESTAL ANCHORING SCREWS NOT INCLUDED.
■ SUITABLE FOR REINFORCEMENT ONLY, ACTUAL DIMENSIONS MUST
BE TAKEN FROM FIXTURE.
FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.
PROVIDE SUITABLE REINFORCEMENT FOR ALL WALL SUPPORTS.
INSTALLATION INSTRUCTIONS SUPPLIED WITH LAVATORY.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the
range of tolerances established by ANSI Standard A112.19.2.
These measurements are subject to change or cancellation. No responsibility
is assumed for use of superseded or voided pages.
J14
© 2008 AS America Inc.
Revised 2/08
Download from Www.Somanuals.com. All Manuals Search And Download.
|