XHub for Notebooks
User’s Guide
R
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Technical Support
If you have questions about installing or using your Adaptec product, check this
document first—you will find answers to most of your questions here. If you need
further assistance, use the support options listed below.
Technical Support Identification (TSID) Number
■
Before contacting Technical Support, you need your unique 12-digit TSID
number. The TSID number identifies your product and support status.
■
The TSID number is included on two white, bar-coded labels, like the example
below. Affix your TSID label to the printed Installation Guide.
Support Options
■
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.com for
articles, troubleshooting tips, and frequently asked questions for your product.
For support via Email, submit your question to Adaptec's Technical Support
Specialists at ask.adaptec.com.
To order Adaptec products, including accessories and cables, call
Europe
■
■
German and English: Search the Adaptec Support Knowledgebase (ASK) at
ask-de.adaptec.com for articles, troubleshooting tips, and frequently asked
questions for your product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-de.adaptec.com.
■
■
French: Search the Adaptec Support Knowledgebase (ASK) at ask-fr.adaptec.com
for articles, troubleshooting tips, and frequently asked questions for your
product.
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask-fr.adaptec.com.
To order Adaptec products, including accessories and cables, call +44 118 934 6160.
Australia and New Zealand
■
■
For support via e-mail, submit your question to Adaptec's Technical Support
Specialists at ask.adaptec.com.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Hong Kong and China
■
■
Fax Technical Support at +852 2869 7100.
Singapore
■
Visit our Web site at www.adaptec.com.
Japan
■
■
Search the Adaptec Support Knowledgebase (ASK) at ask.adaptec.co.jp
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited 1-Year Hardware Warranty
1. Adaptec, Inc. (“Adaptec”) warrants to the purchaser of this product that it will be free from
defects in material and workmanship for a period of one (1) year from the date of purchase.
If the product should become defective within the warranty period, Adaptec, at its option,
will repair or replace the product, or refund the purchaser’s purchase price for the product,
provided it is delivered at the purchaser’s expense to an authorized Adaptec service facility
or to Adaptec.
2. Repair or replacement parts or products will be furnished on an exchange basis and will
either be new or reconditioned. All replaced parts or products shall become the property of
Adaptec. This warranty shall not apply if the product has been damaged by accident,
misuse, abuse or as a result of unauthorized service or parts.
3. Warranty service is available to the purchaser by delivering the product during the
warranty period to an authorized Adaptec service facility or to Adaptec and providing
proof of purchase price and date. The purchaser shall bear all shipping, packing and
insurance costs and all other costs, excluding labor and parts, necessary to effectuate repair,
replacement or refund under this warranty.
4. For more information on how to obtain warranty service, write or telephone Adaptec at 691
South Milpitas Boulevard, Milpitas, CA 95035, (800) 959-7274.
5. THIS LIMITED WARRANTY DOES NOT EXTEND TO ANY PRODUCT WHICH HAS
BEEN DAMAGED AS A RESULT OF ACCIDENT, MISUSE, ABUSE, OR AS A RESULT OF
UNAUTHORIZED SERVICE OR PARTS.
6. THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES WHICH NOW
OR HEREAFTER MIGHT OTHERWISE ARISE RESPECT TO THIS PRODUCT. IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE AND NON-INFRINGEMENT SHALL (A) HAVE NO GREATER
DURATION THAN 1 YEAR FROM THE DATE OF PURCHASE, (B) TERMINATE
AUTOMATICALLY AT THE EXPIRATION OF SUCH PERIOD AND (C) TO THE EXTENT
PERMITTED BY LAW BE EXCLUDED. IN THE EVENT THIS PRODUCT BECOMES
DEFECTIVE DURING THE WARRANTY PERIOD, THE PURCHASER’S EXCLUSIVE
REMEDY SHALL BE REPAIR, REPLACEMENT OR REFUND AS PROVIDED ABOVE.
INCIDENTAL OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION
LOSS OF DATA, ARISING FROM BREACH OF ANY EXPRESS OR IMPLIED WARRANTY
ARE NOT THE RESPONSIBILITY OF ADAPTEC AND, TO THE EXTENT PERMITTED BY
LAW, ARE HEREBY EXCLUDED BOTH FOR PROPERTY DAMAGE, AND TO THE
EXTENT NOT UNCONSCIONABLE, FOR PERSONAL INJURY DAMAGE.
7. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES FOR CONSUMER PRODUCTS, AND SOME STATES
DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO
THE ABOVE LIMITATION OR EXCLUSIONS MAY NOT APPLY TO YOU.
8. This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
v
Download from Www.Somanuals.com. All Manuals Search And Download.
Adaptec Software License Agreement
PLEASE READ CAREFULLY: THE USE OF THIS SOFTWARE IS SUBJECT TO THE
SOFTWARE LICENSE TERMS OF ADAPTEC, INC. AND OTHER LICENSORS WHOSE
SOFTWARE MAY BE BUNDLED WITH THIS PRODUCT.
BY YOUR USE OF THE SOFTWARE INCLUDED WITH THIS PRODUCT YOU AGREE TO
THE LICENSE TERMS REQUIRED BY THE LICENSOR OF THAT SOFTWARE, AS SET
FORTH DURING THE INSTALLATION PROCESS. IF YOU DO NOT AGREE TO THE
LICENSE TERMS APPLICABLE TO THE SOFTWARE, YOU MAY RETURN THE ENTIRE
UNUSED PRODUCT FOR A FULL REFUND.
In return for acquiring a license to use the Adaptec software, which may include software from
third party licensors and patches made available by Adaptec (“Software”), and the related
documentation, you agree to the following terms and conditions:
1. License. This Agreement grants you, the Licensee, a license to:
a. Use the Software on a single computer system, which is not intended for use by more
than five (5) users; and:
b. Make one copy of the Software in machine readable form solely for back-up purposes,
provided you reproduce Adaptec's copyright proprietary legends. Notwithstanding the
foregoing, the Software may be used on the home, laptop or other secondary computer
of the principal user of the Software, and an additional copy of the Software may be
made to support such use. As used in this license, the Software is “in use” when it is
either loaded into RAM or installed on a hard disk or other permanent memory device.
The Software may be “in use” on only one computer at any given time. (Different license
terms and fees are applicable for networked or multiple user applications.) As a specific
condition of this license, you agree to use the Software in compliance with all applicable
laws, including copyright laws, and that you will not copy, transmit, perform or
distribute any audio or other content using the Software without obtaining all necessary
licenses or permissions from the owner of the content.
2. Restrictions. You may not distribute copies of the Software to others or electronically
transfer the Software from one computer to another over a network. You may not post or
otherwise make available the Software, or any portion thereof, in any form, on the Internet.
You may not use the Software in a computer service business, including in time sharing
applications. The Software contains trade secrets and, in order to protect them, you may not
decompile, reverse engineer, disassemble, or otherwise reduce the Software to a human-
perceivable form. YOU MAY NOT MODIFY, ADAPT, TRANSLATE, RENT, LEASE, LOAN,
RESELL FOR PROFIT, DISTRIBUTE, NETWORK OR CREATE DERIVATIVE WORKS
BASED UPON THE SOFTWARE OR ANY PART THEREOF.
3. Ownership of Software. As Licensee, you own the media upon which the software is
recorded or fixed, but Adaptec and its licensors retain title and ownership of the Software
recorded on the original media and all subsequent copies of the Software, regardless of the
form or media in which or on which the original and other copies may exist. This license is
not a sale of the Software or any copy.
4. Confidentiality. You agree to maintain the Software in confidence and that you will not
disclose the Software to any third party without the express written consent of Adaptec. You
further agree to take all reasonable precautions to preclude access of unauthorized persons
to the Software.
5. Term. This license is effective until January 1, 2045, unless terminated earlier. You may
terminate the license at any time by destroying the Software (including the related
documentation) together with all copies or modifications in any form. Adaptec will have the
right to terminate our license immediately if you fail to comply with any term or condition
of this Agreement. Upon any termination, including termination by you, you must destroy
the Software (including the related documentation), together with all copies or
modifications in any form.
6. Special Terms Applicable to Databases. Where a database is included with the Software, you
acknowledge that it is licensed only in connection with the use of the Software to perform
disc creation, and that the database and all data derived therefrom must be maintained in
confidence in accordance with the provisions of Section 4. This license does not grant you
any rights to distribute or disclose such database or data.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Limited Warranty. Adaptec and its Licensor warrant only that the media upon which the
Software is furnished will be free from defects in material or workmanship under normal
use and service for a period of thirty (30) days from the date of delivery to you. ADAPTEC
AND ITS LICENSORS DO NOT AND CANNOT WARRANT THE PERFORMANCE OR
RESULTS YOU MAY OBTAIN BY USING THE SOFTWARE OR DOCUMENTATION. THE
FOREGOING STATES THE SOLE AND EXCLUSIVE REMEDIES ADAPTEC AND ITS
LICENSORS WILL PROVIDE FOR BREACH OF WARRANTY. EXCEPT FOR THE
FOREGOING LIMITED WARRANTY, ADAPTEC AND ITS LICENSORS MAKE NO
WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED, AS TO
NON-INFRINGEMENT OF THIRD PARTY RIGHTS, MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE. Some states do not allow the exclusion of implied
warranties or limitations on how long an implied warranty may last, so the above
limitations may not apply to you. This warranty gives you specific legal rights and you may
also have other rights which vary from state to state.
8. The entire liability of Adaptec and its licensors, and your exclusive remedy for a breach of
this warranty, shall be:
a. The replacement of any media not meeting the above limited warranty which is
returned to Adaptec; or:
b. if Adaptec or its distributor is unable to deliver replacement media which is free from
defects in materials or workmanship, you may terminate this Agreement by returning
the Software and your money will be refunded.
9. Limitation of Liability. IN NO EVENT WILL ADAPTEC OR ITS LICENSORS BE LIABLE
TO YOU FOR ANY INCIDENTAL, CONSEQUENTIAL OR INDIRECT DAMAGES,
INCLUDING ANY LOST PROFITS, LOST SAVINGS, OR LOSS OF DATA, EVEN IF
ADAPTEC OR A LICENSOR HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES, OR FOR ANY CLAIM BY ANY OTHER PARTY. Some states do not allow the
exclusion or limitation of special, incidental, or consequential damages, so the above
limitation or exclusion may not apply to you.
10. Export. You acknowledge that the laws and regulations of the United States and other
countries may restrict the export and re-export of the Software. You agree that you will not
export or re-export the Software or documentation in any form in violation of applicable
United States and foreign law.
11. Government Restricted Rights. The Software is subject to restricted rights as follows. If the
Software is acquired under the terms of a GSA contract: use, reproduction or disclosure is
subject to the restrictions set forth in the applicable ADP Schedule contract. If the Software is
acquired under the terms of a DoD or civilian agency contract, use, duplication or disclosure
by the Government is subject to the restrictions of this Agreement in accordance with 48
C.F.R. 12.212 of the Federal Acquisition Regulations and its successors and 49 C.F.R.
227.7202-1 of the DoD FAR Supplement and its successors.
12. General. You acknowledge that you have read this Agreement, understand it, and that by
using the Software you agree to be bound by its terms and conditions. You further agree
that it is the complete and exclusive statement of the agreement between Adaptec and you,
and supersedes any proposal or prior agreement, oral or written, and any other
communication between Adaptec and you relating to the subject matter of this Agreement.
No additional or any different terms will be enforceable against Adaptec unless Adaptec
gives its express consent, including an express waiver of the terms of this Agreement, in
writing signed by an officer of Adaptec. You assume full responsibility for the use of the
Software and agree to use the Software legally and responsibly. This Agreement shall be
governed by California law, except as to copyright matters, which are covered by Federal
law. This Agreement is deemed entered into at Milpitas, California by both parties. Should
any provision of this Agreement be declared unenforceable in any jurisdiction, then such
provision shall be deemed severable from this Agreement and shall not affect the
remainder hereof. All rights in the Software not specifically granted in this Agreement are
reserved by Adaptec.
Should you have any questions concerning this Agreement, you may contact Adaptec by
writing to:
Adaptec, Inc.
Legal Department
691 South Milpitas Boulevard
Milpitas, California 95035
vii
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory Compliance Statements
Federal Communications Commission Radio Frequency Interference Statement
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy, and if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. However, if this
equipment does cause interference to radio or television equipment reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
■
■
■
Reorient or relocate the receiving antenna.
Increase the separation between equipment and receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is
connected.
■
■
Consult the dealer or an experienced radio/television technician for help.
Use a shielded and properly grounded I/O cable and power cable to ensure compliance of
this unit to the specified limits of the rules.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Adaptec, Inc.
XHub for Notebooks
Tested to Comply
With FCC Standards
FOR HOME OR OFFICE USE
European Union Compliance Statement
This Information Technology Equipment has been tested and found to comply with
EMC Directive 89/336/EEC, as amended by 92/31/EEC and 93/68/EEC, in
accordance with:
■ EN55022 (1998) Emissions
■ EN55024 (1998) Immunity:
– EN61000-4-2 (1998) Electrostatic discharge: 4 kV contact, 8 kV air
– EN61000-4-3 (1998) Radiated immunity
– EN61000-4-4 (1995) Electrical fast transients/burst: 1 kV AC, 0.5 kV I/O
– EN61000-4-5 (1995) Surges 1 kV differential mode, 2 kV common mode
– EN61000-4-6 (1996) Conducted immunity: 3 V
– EN61000-4-11 (1994) Supply dips and variation: 30% and 100%
In addition, all equipment requiring U.L. listing has been found to comply with EMC
Directive 73/23/EEC as amended by 93/68/EEC in accordance with EN60950 with
amendments A1, A2, A3, A4, A11.
Australian/New Zealand Compliance Statement
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to the Australian/New Zealand standard AS/NZS 3548 set out by
the Spectrum Management Agency.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
Canadian Compliance Statement
This Class B digital apparatus meets all requirements of the Canadian Interference-
Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur
le matériel brouilleur du Canada.
Japanese Compliance (Voluntary Control Council Initiative)
This equipment complies to class B Information Technology equipment based on
VCCI (Voluntary Control Council for Interface). This equipment is designed for home
use but it may causes radio frequency interference problem if used too near to a
television or radio. Please handle it correctly per this documentation.
ix
Download from Www.Somanuals.com. All Manuals Search And Download.
In this Guide
Introduction
What’s in the Package
System Requirements
This Is Your XHub
Plugging in Your XHub
Installing Drivers
Installing USBControl
Plugging in Your Devices
Understanding the LEDs
Daisy-Chaining XHubs
About USB
8
9
10
11
12
12
Maximizing XHub Performance
Technical Specifications
Introduction
Congratulations on your purchase of the Adaptec XHub for
Notebooks. You can use your XHub to connect USB 1.1 and 2.0
®
®
devices to your Windows or Macintosh notebook or desktop
computer.
This User’s Guide shows you how to set up and use your Adaptec
XHub for Notebooks.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
What’s in the Package
The Adaptec XHub for Notebooks kit includes:
■
■
■
■
AUH-4100 USB 2.0 hub
5 V, 2.6A power adapter
XHub for Notebooks Quick Start Guide
XHub for Notebooks CD, which includes drivers and the
Adaptec USBControl device manager utility
You’ll also need one high-quality USB cable for each USB device
you wish to connect to your XHub. Most USB devices are sold with
a USB cable. (High quality USB cables are available for purchase on
System Requirements
Windows Computers
■
PC-compatible computer with 266 MHz or faster processor,
®
®
®
running Windows 98SE, Windows Me, Windows 2000, or
®
Windows XP
■
■
CD-ROM drive
Available USB 2.0 port (see Maximizing XHub Performance on
page 12 for more information)
Macintosh Computers
To use the XHub for Notebooks, you need:
■
■
■
Mac OS 9.04 or later
CD-ROM drive
Available USB port (see Maximizing XHub Performance on page
12 for more information)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
Plugging in Your XHub
Follow the picture below to connect your XHub. Your XHub must
be connected to a USB 2.0 port for it to operate at USB 2.0 speeds.
XHubs connected to bus-powered devices can operate without a
power adapter. (See Technical Specifications on page 12 for
limitations.)
Step 1: Plug the XHub into the USB port
on your laptop or desktop computer.
(The location of your available USB port
may differ from what’s shown in this
example.)
Step 2: Plug the power adapter
into the XHub’s Power port.
(To power source)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Drivers
Installing Drivers
USB 2.0 driver software with hub support must be installed on
your computer for the XHub for Notebooks to operate at USB 2.0
speeds. If you are using an Adaptec USB 2.0 controller, install the
USB 2.0 drivers provided on the XHub for Notebooks CD.
will not work with non-Adaptec USB 2.0 controllers. Refer to
your controller’s manufacturer for driver information.
Follow the instructions for your Operating System (OS) to install
the USB 2.0 drivers:
■
■
■
For Windows 2000, Windows Me, or Windows 98SE, see below.
For Windows XP, see page 6.
For Macintosh, see page 7.
most recent drivers to maximize your XHub’s performance.
the most up-to-date USB 2.0 drivers.
Windows 2000/Me/98SE
Turn on your computer and connect your AUH-4100 (see Plugging
in Your XHub on page 4 for instructions). Insert the XHub for
Notebooks CD into your CD-ROM drive. Windows loads the
driver automatically.
Double-checking Driver Installation
To ensure that the driver has installed properly:
1
2
3
4
On your desktop, double-click My Computer.
Double-click Control Panel.
Double-click System. The System Properties window opens.
Open Device Manager.
Adaptec USB 2.0 Hub should appear under Universal Serial Bus
controllers.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
Windows XP
To install the drivers for Windows XP:
1
Turn on your computer and connect your AUH-4100 (see
Plugging in Your XHub on page 4 for instructions).
2
Insert the XHub for Notebooks CD into your CD-ROM drive.
The Found New Hardware wizard opens.
3
4
Select Install the software automatically..., then click Next.
Click Continue Anyway.
5
6
Windows installs the driver. Click Finish to complete the
installation.
Follow the steps in Double-checking Driver Installation on page 5
to ensure that the driver was installed properly.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing Drivers
Macintosh Operating Systems
Because there are currently no USB 2.0 drivers for the MacIntosh
OS, you don’t need a special driver to use the XHub for Notebooks
with your Macintosh computer. (Your XHub for Notebooks will
operate at USB 1.1 speeds.)
Note: The drivers included on your XHub for Notebooks CD
will not work on your Macintosh computer.
To verify that the XHub for Notebooks is recognized by your
system:
1
Turn on your computer and connect your AUH-4100 (see
Plugging in Your XHub on page 4 for instructions).
2
Open the Apple System Profiler and check that USB2.0 Hub
Controller appears in Devices and Volumes under USB, as shown
in the example below.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
Installing USBControl
USBControl is a software utility that helps you easily manage your
USB peripherals. Using USBControl, you can find information on
device performance and status, and get detailed device
information and troubleshooting help.
To install USBControl, insert the XHub for Notebooks CD into your
CD-ROM and follow the on-screen instructions.
Note: USBControl runs with Adaptec USB 2.0 controllers, and
on Windows OSs only.
Plugging in Your Devices
Follow the picture below to connect your USB 1.1 and 2.0 devices
to your XHub for Notebooks. You can plug devices into any of the
four USB ports.
1
2
USB device cable
3
4
Note: USB 1.1 devices won’t operate at USB 2.0 speeds, even if
they’re connected to USB 2.0 hubs or controllers. Your XHub
must be connected to a USB 2.0 port for it and your USB 2.0
devices to operate at USB 2.0 speeds. (See USB 1.1 vs USB 2.0
on page 11 for more information, and Macintosh Operating
Systems on page 7 for special limitations for Macintosh users.)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the LEDs
Understanding the LEDs
Your XHub for Notebooks has 6 colored LEDs to help you monitor
the status of your XHub and USB devices. Refer to the figure below
for the location of each LED.
Power LED
USB Uplink LED
USB Device LEDs
1
2
3
4
■
■
The red Power LED indicates that the XHub is connected to a
power source and that the power is on.
The green USB Uplink LED indicates that the XHub is properly
connected to a USB port on your computer, and that a USB 2.0
driver (version 3.0 or later) is installed. (See Installing Drivers on
page 5 for more information.)
■
The four USB Device LEDs (numbered 1 through 4) indicate the
status of the four USB ports on your XHub (numbered 1
through 4). When a Device LED is illuminated, a USB device is
connected to the corresponding USB port.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
If you want to add more USB 2.0 ports to your system, Adaptec
XHubs can be daisy-chained (linked in series). You can connect up
to five XHub for Notebooks hubs. (This is a USB limitation.)
To daisy-chain XHubs:
1
2
3
Connect a power adapter to each XHub. (See Plugging in Your
XHub on page 4.)
Plug the first XHub’s USB cable into the USB port on your
computer.
Plug the next XHub’s USB cable into a USB port on the first
XHub. You can use any available USB port.
First XHub in chain:
cable to USB port on computer
1
1
1
2
3
3
3
4
4
4
Last XHub in chain
4
Repeat until all your XHubs are daisy-chained together.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
About USB
About USB
USB stands for Universal Serial Bus. It is the interface between
your computer and the USB devices you plug into it. Your
computer communicates with USB devices through the USB
interface.
Some USB features are particularly important to desktop computer
users:
■
USB is one-size-fits-all—any USB device can be plugged into
any USB port using the appropriate USB cable.
■
USB devices feature plug-and-play installation—you don't have
to open your computer or add special hardware to install a new
USB device. Once you plug your USB device into your
computer (or hub) and turn it on, you can start using it right
away.
■
■
You can hot-swap USB devices. You can easily unplug your
digital camera to take away with you, or plug in your joystick
during your lunch break.
You can have many USB devices connected to your computer at
once. Most newer computers come with 2 USB ports. USB hubs
can provide additional ports.
USB 1.1 vs USB 2.0
USB 2.0 transfers data at 480 Megabits per second. USB 1.1
transfers data at 12 Megabits per second—that makes USB 2.0 up to
40 times faster than USB 1.1.
USB 1.1 devices cannot operate at USB 2.0 speeds even when
connected to a USB 2.0 hub or adapter.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
XHub for Notebooks User’s Guide
Maximizing XHub Performance
For your XHub for Notebooks to operate at optimum speed, it
must be connected to a USB 2.0 port, and USB 2.0 driver software
with hub support must be installed on your computer.
Note: Macintosh users—There are currently no USB 2.0 drivers
for the Macintosh OS, and USB 2.0 PCI cards will not work on
Macintosh systems. Your XHub for Notebooks will operate at
USB 1.1 speeds.
If your computer does not have a built-in USB 2.0 port, we
recommend connecting the XHub for Notebooks to an Adaptec
USB 2.0 card for the highest-quality USB 2.0 connection. (For
information on USB 2.0 adapters, go to the Adaptec website at
USB 2.0 drivers with hub support can be found on the XHub for
Notebooks CD included in your kit. See Installing Drivers on page 5
for more information.
Technical Specifications
USB Compliant Version
Number of USB Ports
Operating Temperature
Power Source
USB 2.0, USB Hi-Speed Certified
4
0 °C – 40 °C
Self-powered
Power Adapter Input
Power Adapter Output
AC 100 V – 240 V, 50 Hz/60 Hz
DC 5 V/2.6 A
Note: The XHub for Notebooks can operate without a power
adapter if it is connected to a bus-powered USB device, such as
a mouse, keyboard, or zip drive. However, if the total power
consumption of the USB devices connected to the XHub
exceeds 490 mA, a power adapter must be used. Use Adaptec
USBControl to determine the power consumption of your
devices. Refer to USBControl online help for more information.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Adaptec, Inc.
691 South Milpitas Boulevard
Milpitas, CA 95035 USA
© 2002 Adaptec, Inc.
All rights reserved. Adaptec and the Adaptec logo
are trademarks of Adaptec, Inc. which may be
registered in some jurisdictions.
Part Number: 513302-06, Ver. AA, LB 07/02
Download from Www.Somanuals.com. All Manuals Search And Download.
|