|
ASK Proxima Projection Link 300
Frequently Asked Questions
When using the PL300, the projected image is fuzzy or out of focus.
Adjust the gain control on the side of the receiver. If this does not help, try adjusting the three color controls on the bottom
of the receiver.
What cable should be used between the transmitter and receiver?
Use a CAT-5B, twisted pair cable, with RJ45 connectors on both ends.
Copyright © 1997-2004 InFocus Corporation.
All Rights Reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|