54 Mbps
Wireless
USB Adapter
Model #: 802UIG
User Manual
Solutions for the Digital Life™
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
This page left intentionally blank.
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
1
Thank you for purchasing the Actiontec 54 Mbps Wireless USB Adapter. The 54
Mbps Wireless USB Adapter features the latest wireless technology and security
protocols to keep your data accessible and secure. This easy-to-set-up, easy-to-
use product is perfect for the mobile, home, or small office computer user. If you
want to take your computing to the next level, the Actiontec 54 Mbps Wireless
USB Adapter is one of the keys to your success.
This User Manual will show you how to set up the 54 Mbps Wireless USB Adapter
and customize its configuration to get the most out of your wireless network. The
54 Mbps Wireless USB Adapter is compliant with the 802.11g specifications and
requires a wireless access point, router/gateway, or any other compatible
wireless device.
Package Contents
s Actiontec 54 Mbps Wireless USB Adapter
s
USB cable
s Installation CD (includes user manual)
s Quick Start guide
Minimum System Requirements
A computer with the following:
s
USB connector (USB 1.1, 2.0 compatibility)
s Microsoft Windows 98 SE, Millennium Edition (Me), 2000, or XP
TCP/IP network protocol installed
s Internet Explorer 5.0 or Netscape Navigator 5.0 (or higher)
s
s
s
64 Mb (or more) of RAM
200 MHz (or faster) processor
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Features
s
s
s
IEEE 802.11b and 802.11g standards conformity
USB interface (USB 1.1 [11 Mbps max.], 2.0 [54 Mpbs max.] compatible)
WEP, WPA, WPA_PSK, and 802.1x support
Technical Support
Actiontec Electronics prides itself on making durable, high-performance, high-
quality products. If you need assistance, the Actiontec Technical Support Department
is available all day every day to provide professional support.
Actiontec Electronics, Inc.
760 N. Mary Avenue
Sunnyvale, CA 94085
United States
Technical Support
Phone: (USA) 1-888-436-0657
(UK) 0845-65-80411
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding the
Wireless Network
2
Wireless local area networks (WLAN) perform the exact same functions as wired
local area networks (LAN). Each computer in the WLAN uses a data radio device to
connect to the network, and all computers in the network share the same frequen-
cy and method for identifying wireless devices. Wireless local area networks differ
from wired local area networks only in their operating mode. The two operation
modes are Ad Hoc and Infrastructure.
Ad Hoc Mode
Ad hoc mode is a networking framework by which wireless devices or stations
communicate directly with each other, without the need for an access point or
wireless router/gateway.
Ad hoc mode is also called peer-to-peer mode or independent basic service set
(IBSS). This mode is useful when communicating among many computers locally
without the need to connect to printers or file servers on a wired LAN.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Infrastructure Mode
Infrastructure mode is a networking framework where devices communicate
with each other by first going through an access point or wireless router/gateway.
Infrastructure mode lets wireless devices communicate with each other or with a
wired network.
Two types of service can exist while in infrastructure mode:
Basic Service Set (BSS) - An access point connected to a wired network and a
set of wireless stations.
Extended Service Set (ESS) - A set of two or more basic service sets forming a
single subnetwork.
Note: Corporate WLANs require infrastructure mode to use
services such as file servers or printers.
☞
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up
3
the Adapter
The instructions that follow in this chapter parallel the steps contained in the
Actiontec Connection 1-2-3® setup utility, which provides a visual, step-by-step guide
to setting up the USB Adapter. It is recommended the user run Connection 1-2-3
first, before attempting any other procedures.
Caution: Do not plug in the Adapter until instructed during the
installation procedure.
M
1. Insert the Installation CD in the CD-ROM drive of the computer. Connection
1-2-3 starts automatically. Temporary files and drivers for the Adapter are
loaded onto the hard drive, then the first Connection 1-2-3 screen appears.
Read the onscreen instructions, then click Next.
Note: If Connection 1-2-3 does not start automatically, click
☞
Start from the desktop, then select Run. Type d:\c123.exe
(with “d” representing the drive letter of the computer’s CD-
ROM drive) in the “Open” text box, and click OK.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
2. Get the USB cable and Adapter from the box, then click on Next.
3. Plug the smaller end of the USB cable into the port on the front of the
Adapter, then click Next.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Setting Up the Adapter
4. Plug the other end of the USB cable into the USB port located on the back of
the computer.
Note: After plugging in the Adapter to the computer, wait for the
“Add New Hardware Wizard” to complete before clicking Next.
☞
Click Next.
5. If using Windows XP, follow the steps on the next screen. Otherwise, click Next
to continue.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Note: For systems running Windows 98 SE, the Windows 98 SE
Installation CD may need to be accessed during the installation
process. If this occurs, a window will appear, asking for 98 SE
Installation CD. Remove the Connection 1-2-3 CD from the CD-
ROM drive, replace it with the 98 SE Installation CD, then, when
finished, remove it and put the Connection 1-2-3 CD back in the
CD-ROM drive.
☞
6. Connection 1-2-3 detects the Adapter. Click Next.
7. When the Adapter is successfully detected, make sure the Power light
(PW) glows steadily orange. The Link Activity light (LK) may blink, as well.
Click Next.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 Setting Up the Adapter
8. The congratulations screen appears. Click Next.
9. Read the onscreen instructions, then click Finish.
Reboot the computer. The USB Adapter is now ready to use. For additional config-
uration options, see chapter 4, “Using the Wireless Configuration Utility.” If using
Windows XP, see Appendix B, “Using the Adapter With Windows XP.”
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
This page left intentionally blank.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Wireless
4
Configuration Utility
To monitor the wireless network to which the USB Adapter is connected, as well as
check or adjust wireless network settings, use the Wireless Configuration Utility. This
Utility offers the ability to check wireless network signal strength, connect to a wireless
network, and many other options.
Note: If the computer is using the Windows XP Wireless
☞
Configuration Utility, the Actiontec Wireless Configuration
Utility cannot be used. To use the Actiontec Utility, disable the XP
Utility by right-clicking on the appropriate network icon in the
system tray, then selecting Status from the menu that appears.
In the next window, click Properties. In the next window, make
sure the check box next to “Use Windows to configure my wire-
less network settings” is deactivated (no check mark).
Opening the Wireless Configuration Utility
To open the Utility, go to the right-hand corner of the desktop. In the system tray
(where the clock is located), right-click on the Actiontec Wireless Configuration
Utility icon (shown in the red circle, below)
Note: Depending on the operating system, the Utility icon may
☞
not appear in the system tray. A shortcut icon for the Utility will,
however, appear on the desktop.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
A menu appears, displaying the Utility’s options. To select one, click on it, and the
appropriate window will appear.
About
Selecting “About” from the Utility menu generates the “About” window.
This window displays the version numbers for the Adapter’s chipset, driver version,
and firmware.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Wireless Configuration Utility
Link Status
Selecting “Link Status” from the Utility menu generates the “Link Status” window.
The Link Status window provides information regarding the current status of the
USB Adapter and its settings, including how many packets are being received and
transmitted, transfer rate, SSID, IP address, and other related settings.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Site Monitor
Selecting “Site Monitor” from the Utility menu generates the “Site Monitor” win-
dow. The Site Monitor window displays information regarding nearby visible
access points or wireless routers/gateways, as well as other computers available
through ad hoc networks.
To view more information about a particular network, select it from the “Visible
Networks” list box and click Advanced Monitor. The “Advanced Site Monitor”
appears, displaying more information about the selected network.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Using the Wireless Configuration Utility
View Available Networks
Selecting “View Available Networks” from the Utility menu generates the “Single
Source Card Utility” window. This window displays the available wireless networks,
allowing the user to change networks.
To configure the SSID or name of a wireless network, highlight the name
(“Actiontec” in the figure above, for example) and click Configure. To automati-
cally connect to a particular network every time the Adapter searches for a net-
work, click Add, select the network, and, when the network name appears in the
“Preferred networks” list box, select it. Using the “Move Up” button, make sure the
selected network appears at the top of the list.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Advanced
Clicking “Advanced” in the Single Source Card Utility window generates the
“Advanced” window.
Use this window to select the type of network to which the Adapter connects.
Exit
Selecting “Exit” from the Utility menu closes the Utility.
Hide Systray Icon
Selecting “Hide Systray Icon” removes the Utility icon from the system tray. To
place it back in the system tray, start the Utility by selecting Start from the desktop,
then Programs, Actiontec 54 Mbps, and Wireless Utility.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
and FAQs
5
This chapter describes some common problems that may be encountered when
using the USB Adapter, and ways to resolve the problems. Also included is a list of
frequently asked questions.
Troubleshooting
The Adapter can’t connect to an access point.
From the Network Properties applet, perform the following steps:
• Make sure the operating mode is set to Infrastructure mode.
• Make sure that the SSID is the same as the SSID of the access point. Many
access points are case sensitive and require all devices to match the letter
case as well.
• Check the security settings. In the WEP Encryption window, for example,
make sure all of the WEP settings match the WEP settings of the access
point.
Changing the Adapter’s IP address.
There are two methods to change the Adapter’s IP address:
• Open the USB Adapter Network Connection from the Network Properties
applet. Click on the IP Settings screen, click the Static IP Address radio but-
ton, and change the IP address.
• If you still have problems, unplug the Adapter from the computer and plug
it back in. Then, change the IP address again.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
The computer won’t detect the Adapter.
Make sure the USB cable is properly connected and that the orange Power light
(PW) is on. Also, make sure the computer’s USB drivers are properly installed.
Frequently Asked Questions
How far can I be from the access point and maintain a connection?
The access point’s range depends on the environment. Indoor range is approxi-
mately 91 meters (300 ft.) or more; outdoor range can reach up to 533 meters
(1750 ft.).
How fast is the wireless network?
The rated speed of the wireless network under optimal conditions is 54 Mbps.
This speed does vary, depending on distance from the access point and the
amount of attenuation (physical barriers such as walls, glass, etc.) the wireless
signal must go through.
My Adapter seems to be installed correctly and it says that it is getting a
link, but I can’t access the Internet. What should I do?
Disable any other network adapters that may be installed on the computer. If
these adapters were installed prior to the USB Adapter, they may be preventing
you from getting on the web. If using Windows XP, right-click on My Network
Places and click Properties in the next window to ensure that no network
bridges have been installed on your computer. These can also prevent the
Adapter from getting online.
Can I use the Adapter to connect to the 802.11b access point?
Yes, the Adapter can connect to an 802.11b access point.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Troubleshooting
Will cordless phones interfere with the Adapter?
The Adapter uses the 2.4 GHz frequency. If your cordless phone uses this fre-
quency, problems may occur. Different cordless phones use different frequen-
cies, and generally include a label stating which frequency they use. If you are
having problems with interference caused by your cordless phone, try changing
the channel of your wireless network. This can sometimes clear up interference
issues. Any wireless device using the 2.4 GHz frequency can cause wireless inter-
ference.
Can my wireless signal pass through floors, walls, and glass?
The effect of the physical environment can have varying effects on signal
strength and quality. The denser an object (a concrete wall compared to a plaster
wall, for example), the greater the interference. Concrete or metal-reinforced
structures cause a higher degree of wireless signal loss than those made of wood,
plaster, or glass.
What is WEP?
Wireless Encryption Protocol (WEP) is the standard encryption mode for
802.11x communications.
How do I make a HEX-based WEP key?
64-bit WEP - Composed of 10 alphanumeric characters (0-9, A-F).
Example: 843A29A562
128-bit WEP - Composed of 26 alphanumeric characters (0-9, A-F).
Example: 3C29F2536BEF3276D32E364A2C
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
How do I enable WEP in XP using the Wireless Zero Configuration Utility?
First, make sure the Adapter is correctly installed in the computer. Then, in
the system tray (in the lower right hand side of the desktop, next to the clock),
right-click on the appropriate wireless network (double computer) icon and
select View Available Wireless Networks. When the “Connect to Wireless
Network” window appears, click Advanced. The “Wireless Network Connection
Properties” window appears. Select a wireless network, then click Configure.
When the “Wireless Network Properties” window appears, make sure the correct
SSID or network name is entered in the “Network Name (SSID)” text box. Then,
activate “Data Encryption” by clicking in the appropriate check box. If the text
boxes below remain grayed out, make sure the check box next to “The key is
provided for me automatically” is unchecked (not active). Select a “Key format”
and “Key length” from the appropriate list boxes, then enter the WEP key in the
“Network key” text box. If connecting to an ad hoc network, click in the “This is
a computer-to-computer (ad hoc) network…” check box to activate. Click OK.
What is the difference between 40-bit and 64-bit encryption?
There really is no difference between the two. They are different terminologies
used throughout the industry for the same level of encryption.
I plugged in the Adapter to an available USB port but no “Found New
Hardware Wizard” came up. What should I do?
The USB ports on the computer may be disabled in device manager or in the
BIOS. If this is the case contact your computer manufacturer for help in activat-
ing the USB ports. Also, check that the drivers for the USB controller are installed
correctly on the computer.
Everything installed fine and the Adapter was working until I shut down
and restarted my machine. Now the computer is not detecting the
Adapter. What should I do?
Some USB host controllers have a timing issue at boot up. If the Adapter is not
being detected, try unplugging and then replugging (while the computer is
already booted up) the Adapter. It should start working again.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
A
General
Model Number
802UIG (54 Mbps Wireless USB Adapter)
Standards
IEEE 802.11b/g (Wireless)
Certification
FCC Part 15
CE (available for products purchased in Europe)
Frequency Band
2.4 - 2.4835 GHz
Interface
USB Plug-N-Play (compatible with USB 1.1 and 2.0)
Data Rate
802.11b: up to 11 Mbps
802.11g: up to 54 Mbps (when used with USB 2.0 only)
Data Encryption
64- and 128-bit WEP compatible
WPA
WPA_PSK
802.1x
Wireless Operating Range
Indoors
Up to 91 M (300 ft.)
Outdoors
Up to 533 M (1750 ft.)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
LED Indicators
Power (PW), Link Activity (LK)
Environmental
Operating Temperature
º
º
º
º
0 C to 65 C (32 F to 149 F)
Storage Temperature
º
º
º
º
-20 C to 85 C (-4 F to 185 F)
Operating Humidity
0% to 95% (non-condensing)
Storage Humidity
5% to 95% (non-condensing)
Note: Specifications are subject to change without notice.
☞
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Adapter
with Windows XP
B
This appendix details connecting the USB Adapter to a wireless network on a com-
puter running Windows XP.
Connecting to an Unsecured Access Point
If the Adapter has been properly installed, a pop-up box showing the name of the
available access point appears. To connect to an another unsecured access point:
1. Locate the wireless network (double computer) icon corresponding to the
Adapter by moving the cursor over the network icons in the system tray. When
the correct icon is located, a dialog box similar to the one below appears.
2. Once the correct icon is located, right-click on it and, from the menu that
appears, select View Available Wireless Networks.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
3. The “Wireless Network Connection” window appears. From the “Available
wireless networks” list box, select the network (or SSID of the access point or
wireless router/gateway) with which to connect.
4. Activate the box next to “Allow me to connect to the selected wireless network,
even though it is not secure” by clicking in it to cause a check mark to appear.
5. Click Connect.
Note: If Windows XP SP1 is not running on the computer, the
☞
check mark will not appear and connection with an unsecured
network will automatically appear.
The Adapter is connected to an unsecured wireless network.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Using the Adapter with Windows XP
Connecting to a Secured Access Point
To connect to a secured access point:
1. Locate the wireless network (double computer) icon corresponding to the
Adapter by moving the cursor over the network icons in the system tray. When
the correct icon is located, a dialog box similar to the one below appears.
2. Once the correct icon is located, right-click on it and, from the menu that
appears, select View Available Wireless Networks.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
3. The “Wireless Network Connection” window appears. Click Advanced.
4. When the window below appears, make sure the check box next to “Use
Windows to configure my wireless network settings” is activated.
5. Select the SSID or access point to connect to, then click Configure.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B Using the Adapter with Windows XP
6. The “Wireless Network Properties” window appears. The name of the network
selected in step 5 is displayed in the “Network Name” text box.
7. From the Wireless Network Properties window, select the type of network
authentication from the “Network Authentication” menu list. The choices
include:
Open - Open authentication allows any wireless station to communicate with
the access point. In general, security is improved when using this method.
Shared - In Shared authentication mode, the client is required to have the
secret key in order to authenticate with the access point.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
8. From the Wireless Network Properties window, select the type of data encryp-
tion used on the access point. The choices include:
WEP - WEP (Wired Equivalent Privacy) is an authentication algorithm which
protects authenticated wireless LAN users against eavesdropping.
WPA-PSK - WPA-PSK is a simplified but still powerful form of WPA (see below)
most suitable for home networking. To use WPA-PSK, a static key or “pass-
phrase” is set, as with WEP. But, using TKIP, WPA-PSK automatically changes
the keys at a preset time interval, making it much more difficult for hackers to
find and access them.
WPA - WPA (Wi-Fi Protected Access) is a security technology for wireless net-
works. WPA improves on the authentication and encryption features of WEP.
9. Enter the Network key. Confirm the key, if prompted.
10. If WPA is not selected, make sure the check box next to “The key is provided
for me automatically” is activated.
11. Click OK in all open windows to close them.
The Adapter is connected to a secured wireless network.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Access Point
A device that allows wireless clients to connect to one another. An access point
can also act as a bridge between wireless clients and a “wired” network, such as
an Ethernet network. Wireless clients can be moved anywhere within the cover-
age area of the access point and remain connected to the network. If connected
to an Ethernet network, the access point monitors Ethernet traffic and forwards
appropriate Ethernet messages to the wireless network, while also monitoring
wireless traffic and forwarding wireless client messages to the Ethernet network.
ATM (Asynchronous Transfer Mode)
A networking technology based on transferring data in fixed-size packets.
Client
A desktop or mobile computer connected to a network.
DHCP (Dynamic Host Configuration Protocol)
A protocol designed to automatically assign an IP address to every computer on
the network.
DNS (Domain Name System) Server Address
Allows Internet host computers to have a domain name and one or more IP
addresses. A DNS server keeps a database of host computers and their respective
domain names and IP addresses so that when a user enters a domain name into
a Web browser, the user is sent to the proper IP address. The DNS server address
used by computers on the home network corresponds to the location of the DNS
server the ISP has assigned.
DSL (Digital Subscriber Line) Modem
A modem that uses existing phone lines to transmit data at high speeds.
Encryption
A method to provide wireless data transmissions a level of security.
ESSID (Extended Service Set Identifier)
A unique identifier for a wireless network. Also known as “SSID.”
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Ethernet Network
A standard wired networking configuration using cables and hubs.
Firewall
A method preventing users outside the network from accessing and/or damag-
ing files or computers on the network.
Gateway
A central device that manages the data traffic of the network, as well as data traf-
fic to and from the Internet.
IP (Internet Protocol) Address
A series of four numbers separated by periods identifying a unique Internet
computer host.
ISP Gateway Address
An IP address for the Internet router. This address is only required when using a
cable or DSL modem.
ISP (Internet Service Provider)
A business that allows individuals or businesses to connect to the Internet.
LAN (Local Area Network)
A group of computers and devices connected together in a relatively small area
(such as a house or an office). A home network is considered a LAN.
MAC (Media Access Control) Address
The unique hardware address of a device connected to a network.
NAT (Network Address Translation)
A method allowing all of the computers on a home network to use one IP
address, enabling access to the Internet from any computer on the home net-
work without having to purchase more IP addresses from the ISP.
PC Card
An adapter that inserts in the PCMCIA slot of a computer, enabling the commu-
nication with a device.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
PPPoE (Point-To-Point Protocol over Ethernet)/
PPPoA (Point-To-Point Protocol over ATM)
Methods of secure data transmission.
Router
A central device that manages the data traffic of the network.
Subnet Mask
A set of four numbers configured like an IP address used to create IP address
numbers used only within a particular network.
SSID
See “ESSID.”
TCP/IP (Transmission Control Protocol/Internet Protocol)
The standard protocol for data transmission over the Internet.
USB (Universal Serial Bus)
An external peripheral interface standard for communicationis between a com-
puter and external peripheral over a cable using biserial transmission.
WAN (Wide Area Network)
A network that connects computers located in separate areas, (i.e., different
buildings, cities, countries). The Internet is a WAN.
WECA (Wireless Ethernet Compatibility Alliance)
An industry group that certifies cross-vender interoperability and compatibility
of IEEE 802.11b wireless networking products and promotes the standard for
enterprise, small business, and home environments.
WEP (Wired Equivalent Privacy)
A security protocol for WLANs defined in the 802.11b standard designed to pro-
vide the same level of security as a wired LAN.
WLAN (Wireless Local Area Network)
A group of computers and other devices connected wirelessly in a small area.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Wi-Fi (Wireless Fidelity)
A generic term for any kind of wireless network.
WPA (Wi-Fi Protected Access)
An improved version of WEP using better encryption and authentication,
designed to work with existing WEP-enabled products.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Regulatory Compliance Notices
Class B Equipment
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installa-
tion. This equipment generates, uses, and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that inter-
ference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by implementing one or more of the following measures:
s Reorient or relocate the receiving antenna;
s Increase the separation between the equipment and receiver;
s Connect the equipment to an outlet on a circuit different from that to
which the receiver is connected;
s Consult the dealer or an experienced radio or television technician for help.
Modifications
The FCC requires the user to be notified that any changes or modifications made
to this device that are not expressly approved by Actiontec Electronics, Inc., may
void the user’s authority to operate the equipment.
Declaration of conformity for products marked with the FCC logo – United States
only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the fol-
lowing two conditions:
1. This device may not cause harmful interference;
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
2. This device must accept any interference received, including interference that
may cause unwanted operation.
Note: To comply with FCC RF exposure compliance require-
☞
ments, the antenna used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with
any other antenna or transmitter.
For questions regarding your product or the FCC declaration, contact:
Actiontec Electronics, Inc.
760 North Mary Ave.
Sunnyvale, CA 94085
United States
Tel: (408) 752-7700
Fax: (408) 541-9005
Miscellaneous Legal Notices
© 2004 Actiontec Electronics, Inc. Actiontec Installation Buddy, Connection 1-2-3,
Solutions for the Digital Life, Actiontec Digital Gear, and the Actiontec logo are
trademarks or registered trademarks of Actiontec Electronics, Inc.
All other names are the property of their respective owners.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
Hardware: Actiontec Electronics, Inc., warrants to the end user (“Customer”) that
this hardware product will be free from defects in workmanship and materials,
under normal use and service, for twelve (12) months from the date of purchase
from Actiontec Electronics or its authorized reseller.
Actiontec Electronics’ sole obligation under this express warranty shall be, at
Actiontec’s option and expense, to repair the defective product or part, deliver to
Customer an equivalent product or part to replace the defective item, or if neither
of the two foregoing options is reasonably available, Actiontec Electronics may, in its
sole discretion, refund to Customer the purchase price paid for the defective prod-
uct. All products that are replaced will become the property of Actiontec Electronics,
Inc. Replacement products may be new or reconditioned. Actiontec Electronics war-
rants any replaced or repaired product or part for ninety (90) days from shipment,
or the remainder of the initial warranty period, whichever is longer.
Software: Actiontec Electronics warrants to Customer that each software program
licensed from it will perform in substantial conformance to its program specifica-
tions, for a period of ninety (90) days from the date of purchase from Actiontec
Electronics or its authorized reseller. Actiontec Electronics warrants the media con-
taining software against failure during the warranty period. The only updates that
will be provided are at the sole discretion of Actiontec Electronics and will only
Electronics’ sole obligation under this express warranty shall be, at Actiontec
Electronics’ option and expense, to refund the purchase price paid by Customer
for any defective software product, or to replace any defective media with software
which substantially conforms to applicable Actiontec Electronics published specifi-
cations. Customer assumes responsibility for the selection of the appropriate appli-
cations program and associated reference materials. Actiontec Electronics makes
no warranty or representation that its software products will meet Customer’s
requirements or work in combination with any hardware or applications software
products provided by third parties, that the operation of the software products will
be uninterrupted or error free, or that all defects in the software products will be
corrected. For any third-party products listed in the Actiontec Electronics software
product documentation or specifications as being compatible, Actiontec Electronics
will make reasonable efforts to provide compatibility, except where the non-com-
patibility is caused by a “bug” or defect in the third party’s product or from use of
the software product not in accordance with Actiontec Electronics published speci-
fications or user guide.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
THIS ACTIONTEC ELECTRONICS PRODUCT MAY INCLUDE OR BE BUNDLED
WITH THIRD-PARTY SOFTWARE, THE USE OF WHICH IS GOVERNED BY A
SEPARATE END-USER LICENSE AGREEMENT.
THIS ACTIONTEC ELECTRONICS WARRANTY DOES NOT APPLY TO SUCH THIRD-
PARTY SOFTWARE. FOR THE APPLICABLE WARRANTY, PLEASE REFER TO THE
END-USER LICENSE AGREEMENT GOVERNING THE USE OF SUCH SOFTWARE.
Obtaining Warranty Service: Customer may contact Actiontec Electronics
Technical Support Center within the applicable warranty period to obtain war-
ranty service authorization. Dated proof of purchase from Actiontec Electronics or
its authorized reseller may be required. Products returned to Actiontec Electronics
must be pre-authorized by Actiontec Electronics with a Return Merchandise
Authorization (RMA) number marked on the outside of the package, and sent
prepaid and packaged appropriately for safe shipment, and it is recommended that
they be insured or sent by a method that provides for tracking of the package. The
repaired or replaced item will be shipped to Customer, at Actiontec Electronics’
expense, not later than thirty (30) days after Actiontec Electronics receives the
defective product.
Return the product to:
(In the United States)
Actiontec Electronics, Inc.
760 North Mary Avenue
Sunnyvale, CA 94085
Actiontec Electronics shall not be responsible for any software, firmware, informa-
tion, memory data, or Customer data contained in, stored on, or integrated with
any products returned to Actiontec Electronics for repair, whether under warranty
or not.
WARRANTIES EXCLUSIVE: IF AN ACTIONTEC ELECTRONICS’ PRODUCT DOES
NOT OPERATE AS WARRANTED ABOVE, CUSTOMER’S SOLE REMEDY FOR
BREACH OF THAT WARRANTY SHALL BE REPAIR, REPLACEMENT, OR REFUND
OF THE PURCHASE PRICE PAID, AT ACTIONTEC ELECTRONICS’ OPTION. TO
THE FULL EXTENT ALLOWED BY LAW, THE FOREGOING WARRANTIES AND
REMEDIES ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, TERMS OR
CONDITIONS, EXPRESS OR IMPLIED, EITHER IN FACT OR BY OPERATION OF LAW,
STATUTORY OR OTHERWISE, INCLUDING WARRANTIES, TERMS OR CONDITIONS
OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, SATISFACTORY
QUALITY, CORRESPONDENCE WITH DESCRIPTION, AND NON-INFRINGEMENT,
ALL OF WHICH ARE EXPRESSLY DISCLAIMED. ACTIONTEC ELECTRONICS
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Limited Warranty
NEITHER ASSUMES NOR AUTHORIZES ANY OTHER PERSON TO ASSUME FOR
IT ANY OTHER LIABILITY IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE OR USE OF ITS PRODUCTS.
ACTIONTEC ELECTRONICS SHALL NOT BE LIABLE UNDER THIS WARRANTY
IF ITS TESTING AND EXAMINATION DISCLOSE THAT THE ALLEGED DEFECT
OR MALFUNCTION IN THE PRODUCT DOES NOT EXIST OR WAS CAUSED BY
CUSTOMER’S OR ANY THIRD PERSON’S MISUSE, NEGLECT, IMPROPER INSTALLATION
OR TESTING, UNAUTHORIZED ATTEMPT TO OPEN, REPAIR OR MODIFY THE
PRODUCT, OR ANY OTHER CAUSE BEYOND THE RANGE OF THE INTENDED USE, OR
BY ACCIDENT, FIRE, LIGHTNING, OTHER HAZARDS, OR ACTS OF GOD.
LIMITATION OF LIABILITY: TO THE FULL EXTENT ALLOWED BY LAW,
ACTIONTEC ELECTRONICS ALSO EXCLUDES FOR ITSELF AND ITS SUPPLIERS
ANY LIABILITY, WHETHER BASED IN CONTRACT OR TORT (INCLUDING
NEGLIGENCE), FOR INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR
PUNITIVE DAMAGES OF ANY KIND, OR FOR LOSS OF REVENUE OR PROFITS,
LOSS OF BUSINESS, LOSS OF INFORMATION OR DATA, OR OTHER FINANCIAL
LOSS ARISING OUT OF OR IN CONNECTION WITH THE SALE, INSTALLATION,
MAINTENANCE, USE, PERFORMANCE, FAILURE, OR INTERRUPTION OF ITS
PRODUCT, EVEN IF ACTIONTEC ELECTRONICS OR ITS AUTHORIZED RESELLER
HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, AND LIMITS ITS
LIABILITY TO REPAIR, REPLACEMENT, OR REFUND OF THE PURCHASE PRICE
PAID, AT ACTIONTEC ELECTRONICS’ OPTION. THIS DISCLAIMER OF LIABILITY
FOR DAMAGES WILL NOT BE AFFECTED IF ANY REMEDY PROVIDED HEREIN
SHALL FAIL OF ITS ESSENTIAL PURPOSE.
Disclaimer: Some countries, states or provinces do not allow the exclusion or
limitation of implied warranties or the limitation of incidental or consequential
damages for certain products supplied to consumers, or the limitation of liability
for personal injury, so the above limitations and exclusions may be limited in their
application to you. When the implied warranties are not allowed to be excluded in
their entirety, they will be limited to the duration of the applicable written warranty.
This warranty gives you specific legal rights which may vary depending on local law.
Dispute Resolution: The customer may contact the Director of Technical Support
in the event the Customer is not satisfied with Actiontec Electronics’ response to
the complaint. In the event that the Customer is still not satisfied with the response
of the Director of Technical Support, the Customer is instructed to contact the
Director of Marketing. In the event that the Customer is still not satisfied with the
response of the Director of Marketing, the Customer is instructed to contact the
Chief Financial Officer and/or President.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Actiontec 54 Mbps Wireless USB Adapter User Manual
Governing Law: This Limited Warranty shall be governed by the laws of the State
of California, U.S.A., excluding its conflicts of laws and principles, and excluding
the United Nations Convention on Contracts for the International Sale of Goods.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
|
