Acer Computer Monitor ETDG5HP006 User Manual

TABLE OF CONTENTS  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INFORMATION FOR YOUR SAFETY AND COMFORT  
Safety instructions  
Read these instructions carefully. Keep this document for future reference. Follow all warnings  
and instructions marked on the product.  
CAUTION for accessibility  
Be sure that the power outlet you plug the power cord into is easily accessible and located as  
close to the equipment operator as possible. When you need to disconnect power to the  
equipment, be sure to unplug the power cord from the electrical outlet.  
Warnings  
Do not use this product near water.  
Do not place this product on an unstable cart, stand or table. If the product falls, it could  
be seriously damaged.  
Slots and openings are provided for ventilation to ensure reliable operation of the  
product and to protect it from overheating. These openings must not be blocked or  
covered. The openings should never be blocked by placing the product on a bed, sofa, rug  
or other similar surface. This product should never be placed near or over a radiator or  
heat register, or in a built-in installation unless proper ventilation is provided.  
Never push objects of any kind into this product through cabinet slots as they may touch  
dangerous voltage points or short-out parts that could result in a fire or electric shock.  
Never spill liquid of any kind onto or into the product.  
To avoid damage of internal components and to prevent battery leakage, do not place  
the product on a vibrating surface.  
Never use it under sporting, exercising, or any vibrating environment which will probably  
cause unexpected short current or damage rotor devices, HDD, Optical drive, and even  
exposure risk from lithium battery pack.  
Safe listening  
Follow these instructions, suggested by hearing experts, to protect your earning.  
Gradually increase the volume until you can hear it clearly and comfortably and without  
distortion.  
After setting the volume level, do not increase it after your ears adjust.  
Limit the amount of time listening to music at high volume.  
Avoid turning up the volume to block out noisy surroundings.  
Turn the volume down if you can’t hear people speaking near you.  
EN-2  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Product servicing  
Do not attempt to service this product yourself, as opening or removing covers may expose you to  
dangerous voltage points or other risks. Refer all servicing to qualified service personnel.  
Unplug this product from the wall outlet and refer servicing to qualified service person-nel when:  
the power cord or plug is damaged, cut or frayed  
liquid was spilled into the product  
the product was exposed to rain or water  
the product has been dropped or the case has been damaged  
the product exhibits a distinct change in performance, indicating a need for service  
the product does not operate normally after following the operating instructions  
Note: Adjust only those controls that are covered by the operating instructions, since  
improper adjustment of other controls may result in damage and will often require  
extensive work by a qualified technician to restore the product to normal condition.  
LCD Pixel Statement  
The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some  
pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded  
image and does not constitute a malfunction.  
Tips and information for comfortable use  
Computer users may complain of eyestrain and headaches after prolonged use. Users are also at  
risk of physical injury after long hours of working in front of a computer. Long work periods, bad  
posture, poor work habits, stress, inadequate working conditions, personal health and other  
factors greatly increase the risk of physical injury.  
Incorrect computer usage may lead to carpal tunnel syndrome, tendonitis, tenosynovitis or other  
musculoskeletal disorders. The following symptoms may appear in the hands, wrists, arms,  
shoulders, neck or back:  
numbness, or a burning or tingling sensation  
aching, soreness or tenderness  
pain, swelling or throbbing  
stiffness or tightness  
coldness or weakness  
If you have these symptoms, or any other recurring or persistent discomfort and/or pain related to  
computer use, consult a physician immediately and inform your company’s health and safety  
department.  
The following section provides tips for more comfortable computer use.  
Finding your comfort zone  
Find your comfort zone by adjusting the viewing angle of the monitor, using a footrest, or raising  
your sitting height to achieve maximum comfort. Observe the following tips:  
refrain from staying too long in one fixed posture  
avoid slouching forward and/or leaning backward  
stand up and walk around regularly to remove the strain on your leg muscles  
take short rests to relax your neck and shoulders  
avoid tensing your muscles or shrugging your shoulders  
install the external display, keyboard and mouse properly and within comfort able reach  
if you view your monitor more than your documents, place the display at the center of  
your desk to minimize neck strain  
EN-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking care of your vision  
Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting,  
poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The  
following sections provide suggestions on how to reduce eyestrain.  
Eyes  
Rest your eyes frequently.  
Give your eyes regular breaks by looking away from the monitor and focusing on a  
distant point.  
Blink frequently to keep your eyes from drying out.  
Display  
Keep your display clean.  
Keep your head at a higher level than the top edge of the display so your eyes point  
downward when looking at the middle of the display.  
Adjust the display brightness and/or contrast to a comfortable level for enhanced text  
readability and graphics clarity.  
Eliminate glare and reflections by:  
placing your display in such a way that the side faces the window or any light source  
minimizing room light by using drapes, shades or blinds  
using a task light  
changing the display’s viewing angle  
using a glare-reduction filter  
using a display visor, such as a piece of cardboard extended from the display’s top front  
edge  
Avoid adjusting your display to an awkward viewing angle.  
Avoid looking at bright light sources, such as open windows, for extended periods of  
time.  
Developing good work habits  
Develop the following work habits to make your computer use more relaxing and productive:  
Take short breaks regularly and often.  
Perform some stretching exercises.  
Breathe fresh air as often as possible.  
Exercise regularly and maintain a healthy body.  
Warning! We do not recommend using the product on a couch or bed. If this is  
unavoidable, work for only short periods, take breaks regularly, and do some stretching  
exercises.  
For more information and help in recycling, please visit the following websites:  
Worldwide:  
EN-4  
Download from Www.Somanuals.com. All Manuals Search And Download.  
UNPACKING  
Please check the following items are present when you unpack the box, and  
save the packing materials in case you will need to ship or transport the  
monitor in future.  
LCD Monitor  
AC Power Cord  
D-Sub Cable  
(Optional)  
DVI Cable (Optional)  
Audio Cable  
(Optional)  
User Manual  
Quick Start Guide  
EN-5  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ATTACHING / REMOVING THE BASE  
Note: Remove the monitor and monitor base from its packaging.  
Carefully place the monitor face-down on a stable surface -- use a  
cloth to avoid scratching the screen.  
Install:  
Remove:  
Align the base with the stand and  
Depress the release hooks as indicated  
push the base towards the top of the first before removing the base and  
monitor.  
follow the arrow direction to remove  
it.  
SCREEN POSITION ADJUSTMENT  
In order to optimize the best viewing position, you can adjust the tilt of the  
monitor by using both of your hands to hold the edges of the monitor as  
shown in the figure below.  
The monitor can be adjusted to 15 degrees up or 5 degrees down as indicated  
by arrow below.  
EN-6  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CONNECTING THE POWER CORD  
Check first to make sure that the power cord you use is the correct type  
required for your area.  
This monitor has a universal power supply that allows operation in either  
100/120V AC or 220/240 V AC voltage area. No user-adjustment is required.  
Plug one end of the power cord to the AC Inlet, plug another end to a  
proper AC outlet.  
For unit using at 120 V AC:  
Use a UL Listed Cord Set, Type SVT wire and plug rated 10 A/125 V.  
For unit using at 220/240 V AC (outside of U.S.):  
Use a Cord Set consisting of H05VV-F cord and plug rated 10 A, 250 V. The  
cord set should have the appropriate safety approvals for the country in  
which the equipment will be installed.  
SAFETY PRECAUTION  
Avoid placing the monitor, or any other heavy object, on the power cord  
to avoid damage to the cable.  
Do not expose the monitor to rain, excessive moisture, or dust.  
Do not cover the ventilation slots or openings of the monitor. Always put  
the monitor in a place where there is adequate ventilation.  
Avoid placing the monitor against a bright background or where sun-light  
or other light sources may reflect on the face of the monitor. Place the  
monitor just below eye level.  
Handle with care when transporting the monitor.  
Refrain from giving shock or scratch to the screen, as screen is fragile.  
CLEANING YOUR MONITOR  
Please carefully follow the below guidelines when cleaning the monitor.  
Always unplug the monitor before cleaning.  
Use a soft cloth to wipe the screen and cabinet front and sides.  
EN-7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
POWER SAVING  
The monitor will be driven into Power Saving” mode by the control signal  
from the display controller, as indicated by the amber-color power LED.  
State  
ON  
LED Light  
Blue  
Power Saving Mode  
Amber  
The power saving states will be kept until a control signal has been detected  
or the keyboard or mouse is activated. The recovery time from Active OFF  
state back to ON state is around 3 seconds.  
DDC  
To make your installation easier, the monitor is able to Plug and Play with  
your system if your system also supports DDC protocol. The DDC (Display Data  
Channel) is a communication protocol through which the monitor  
automatically informs the host system about its capabilities, for example,  
supported resolutions and corresponding timing. The monitor supports  
DDC2B standard.  
EN-8  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
CONNECTOR PIN ASSIGNMENT  
15-Pin Color Display Signal Cable  
PIN NO.  
DESCRIPTION  
Red  
PIN NO.  
9.  
DESCRIPTION  
+5V  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
Green  
10.  
Logic Ground  
Monitor Ground  
DDC-Serial Data  
H-Sync  
Blue  
11.  
Monitor Ground  
DDC-return  
R-Ground  
G-Ground  
B-Ground  
12.  
13.  
14.  
V-Sync  
15.  
DDC-Serial Clock  
EN-9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
24-Pin Color Display Signal Cable*  
PIN  
1.  
Meaning  
TMDS Data2-  
TMDS Data2+  
TMDS Data 2/4 Shield  
NC  
PIN  
13.  
14.  
15.  
16.  
17.  
18.  
19.  
20.  
21.  
22.  
23.  
24.  
Meaning  
NC  
2.  
+5V Power  
3.  
Logic Ground  
Hot Plug Detect  
TMDS Data0-  
TMDS Data0+  
TMDS Data 0/5 Shield  
NC  
4.  
5.  
NC  
6.  
DDC Clock  
DDC Data  
7.  
8.  
NC  
9.  
TMDS Data1-  
TMDS Data1+  
TMDS Data 1/3 Shield  
NC  
NC  
10.  
11.  
12.  
TMDS Clock Shield  
TMDS Clock+  
DDC TMDS Clock-  
* only for certain models  
Download from Www.SomanualsE.coNm-.1A0ll Manuals Search And Download.  
STANDARD TIMING TABLE  
Mode  
MAC  
MAC  
MAC  
MAC  
VESA  
SVGA  
SVGA  
SVGA  
SVGA  
MAC  
XGA  
Resolution  
1
640 x 480  
640 x 480  
640 x 480  
640 x 480  
720 x 400  
800 x 600  
800 x 600  
800 x 600  
800 x 600  
832 x 624  
1024 x 768  
1024 x 768  
1024 x 768  
1152 x 870  
1152 x 864  
1280 x 720  
1280 x 800  
1600 x 900  
60  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
Hz  
2
72  
3
75  
4
66.66  
70  
5
6
56  
7
60  
8
72  
9
75  
10  
11  
12  
13  
14  
15  
16  
17  
18  
74.55  
60  
XGA  
70  
XGA  
75  
MAC  
VESA  
VESA  
WXGA  
WXGA+  
75  
75  
60  
60  
60  
Download from Www.SomanualsE.coNm-.1A1ll Manuals Search And Download.  
 
INSTALLATION  
To install the monitor to your host system, please follow the steps as given  
below:  
Steps  
1. 1-1 Connect Video Cable  
a. Make sure both the monitor and computer are powered-OFF.  
b. Connect the VGA video cable to the computer.  
1-2 Connect Digital Cable (Only Dual-input model)  
a. Make sure both the monitor and computer are powered-OFF.  
b. Connect one end of the 24-pin DVI cable to the back of the monitor  
and connect the other end to the computer’s port.  
2. Connect the Audio Cable(Only Audio-Input Model)(Optional)  
3. Connect power cord  
Connect the power cord to the monitor, then to a properly grounded AC  
outlet.  
4. Power-ON Monitor and Computer  
Power-ON the monitor first, then power-ON the computer.  
This sequence is very important.  
5. If the monitor still does not function properly, please refer to the  
troubleshooting section to diagnose the problem.  
Download from Www.SomanualsE.coNm-.1A2ll Manuals Search And Download.  
 
USER CONTROLS  
Power Switch / Power LED:  
To turn the monitor ON or OFF.  
Lights up to indicate the power is turned ON.  
Using the Shortcut Menu  
Press the function button to open the shortcut menu. The shortcut menu lets you  
quickly select the most commonly accessed settings.  
Empowering:  
Press the Empowering Key to open the Acer eColor Management OSD and access the  
scenario modes.  
AUTO Auto Adjust:  
Press this button to activate the Auto Adjustment function. The Auto Adjustment  
function is used to set the HPos, VPos, Clock and Focus.  
MENU OSD functions  
Press this botton to activate the OSD menu.  
Volume Up / Down  
Press to adjust volume (Only Audio-Input Model)(Optional)  
INPUT Input Key  
Use Input key to select from different video sources that may be connected to your  
monitor.  
(a) VGA input  
(b) DVI input  
(c) HDMI input  
As you cycle through the sources you will see the following messages on right top side  
of screen to indicate currently selected input source. It may take 1 or 2 seconds for the  
image to appear.  
VGA or DVI or HDMI  
If either VGA or DVI input is selected ,but the VGA and DVI cables are not con-nected,  
a floating dialog box indicates:  
“No Cable Connect” or “No Signal”  
Download from Www.SomanualsE.coNm-.1A3ll Manuals Search And Download.  
 
Acer eColor Management  
Operation instructions  
Step 1: Press “  
” Key to open the Acer eColor Management OSD and access  
the scenario modes  
Step 2: Press ““ or “” to select the mode  
Step 3: Press “ AUTO “ Key to confirm the mode and run Auto Adjust.  
Features and Benefits  
Main  
Menu icon  
Sub Menu Sub Menu  
Description  
icon  
item  
User defined. Settings can be fine-tuned to  
suit any situation  
N/A  
User mode  
Optimal balance of brightness and contrast  
prevent eyestrain. The most comfortable way  
to read onscreen text.  
N/A  
N/A  
N/A  
Text mode  
Standard  
mode  
Default Setting. Reflects native display  
capability  
Enhances colors and emphasize fine detail.  
Pictures and photographs appear in vibrant  
colors with sharp detail.  
Grahpic  
mode  
Displays scenes in clearest detail. Presents  
great visuals, even in unsuitably-lit  
environments.  
Movie  
mode  
N/A  
Download from Www.SomanualsE.coNm-.1A4ll Manuals Search And Download.  
Adjusting the OSD settings  
Note: The following content is for general reference only. Actual  
product specifications may vary.  
The OSD can be used for adjusting the settings of your LCD Monitor.  
Press the MENU key to open the OSD. You can use the OSD to adjust the  
picture quality, OSD position and general settings. For advanced settings,  
please refer to following page:  
Adjusting the picture quality  
1 Press the MENU key to bring up the OSD.  
2 Using the / keys, select  
Picture from the OSD. Then navigate to the  
picture element you wish to adjust.  
3 Use the / keys to adjust the sliding scales.  
4 The Picture menu can be used to adjust the current Brightness, Contrast,  
Colour Temp, Auto Config and other image-related qualities.  
Download from Www.SomanualsE.coNm-.1A5ll Manuals Search And Download.  
Adjusting the OSD position  
1 Press the MENU key to bring up the OSD.  
2 Using the directional keys, select  
OSD from the on screen display. Then  
navigate to the feature you wish to adjust.  
Download from Www.SomanualsE.coNm-.1A6ll Manuals Search And Download.  
Adjusting the setting  
1 Press the MENU key to bring up the OSD.  
2 Using the / keys, select  
Setting from the OSD. Then navigate to  
the feature you wish to adjust.  
3 The Setting menu can be used to adjust the screen Menu Language and  
other important settings.  
Download from Www.SomanualsE.coNm-.1A7ll Manuals Search And Download.  
Product information  
1 Press the MENU key to bring up the OSD.  
2 Using the / keys, select  
Information from the OSD. Then the basic  
information of LCD monitor will show up for current input.  
Download from Www.SomanualsE.coNm-.1A8ll Manuals Search And Download.  
TROUBLESHOOTING  
Before sending your LCD monitor for servicing, please check the trouble-  
shooting list below to see if you can self-diagnose the problem.  
(VGA Mode)  
Problems  
Current Status  
LED ON  
Remedy  
Using OSD, adjust brightness and  
No Picture  
contrast to maximum or reset to  
their default settings.  
Check the power switch.  
Check if AC power cord is properly  
connected to the monitor.  
LED OFF  
Check if video signal cable is  
properly connected at the back of  
monitor.  
LED displays amber color  
Check if the power of computer  
system is ON.  
Check if the specification of graphics  
adapter and monitor is in  
compliance which may be causing  
the input signal frequency  
mismatch.  
Abnormal  
Picture  
Unstable Picture  
Using OSD, adjust RESOLUTION,  
CLOCK, CLOCK-PHASE, H-POSITION  
and V-POSITION with non-standard  
signals.  
Using OSD, in case of missing full-  
screen image, please select other  
resolution or other vertical refresh  
timing.  
Wait for a few seconds after  
adjusting the size of the image  
before changing or disconnecting  
the signal cable or powering OFF the  
monitor.  
Display is missing, center  
shift, or too small or too  
large in display size  
Check the audio cable with the host  
PC is connected.  
Check if the volume setup of the  
host PC is in minimum position and  
try to raise the volume level.  
Abnormal  
Sound  
(Only Audio-  
Input model)  
(Optional)  
No sound, or sound level  
is too low  
Download from Www.SomanualsE.coNm-.1A9ll Manuals Search And Download.  
 
(DVI Mode)  
Problems  
Current Status  
LED ON  
Remedy  
Using OSD, adjust brightness  
No Picture  
and contrast to maximum or  
reset to their default settings.  
Check the power switch.  
Check if AC power cord is  
properly connected to the  
monitor.  
LED OFF  
Check if video signal cable is  
properly connected at the back  
of monitor.  
LED displays amber color  
Check if the power of computer  
system is ON.  
Check the audio cable with the  
host PC is connected.  
Check if the volume setup of the  
host PC is in minimum position  
and try to raise the volume  
level.  
Abnormal Sound  
(Only Audio-Input  
model)  
No sound, or sound  
level is too low  
(Optional)  
Download from Www.SomanualsE.coNm-.2A0ll Manuals Search And Download.  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih  
Taipei Hsien 221, Taiwan  
Tel : 886-2-2696-1234  
Fax : 886-2-2696-3535  
Declaration of Conformity  
We,  
Acer Incorporated  
8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan  
Contact Person: Mr. Easy Lai, E-mail: [email protected]  
And,  
Acer Europe SA  
Via Cantonale, Centro Galleria 2 6928 Manno Switzerland  
Hereby declare that:  
Product:  
LCD Monitor  
Trade Name:  
Model Number:  
SKU Number:  
Acer  
G205HV  
G205HV********(“*” = 0~9, a ~ z, or A ~ Z)  
Is compliant with the essential requirements and other relevant provisions of the following EC directives,  
and that all the necessary steps have been taken and are in force to assure that production units of the same  
product will continue comply with the requirements.  
EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:  
-. EN55022, AS/NZS CISPR22 Class B.  
-. EN55024  
-. EN61000-3-2, Class D  
-. EN61000-3-3  
Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized  
standard:  
-. EN60950-1  
RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in  
Electrical and Electronic Equipment:  
-. The maximum concentration values of the restricted substances by weight in homogenous material  
are:  
Lead  
0.1% Polybrominated Biphenyls (PBB’s)  
0.1%  
0.1%  
0.01%  
Mercury  
0.1% Polybrominated Diphenyl Ethers (PBDE’s)  
Hexavalent Chromium 0.1% Cadmium  
Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign  
requirements for energy-related product.  
Year to begin affixing CE marking 2010.  
Jun. 3, 2010  
Date  
Easy Lai /Manager  
Regulation, Acer Inc.  
Download from Www.SomanualsE.coNm-.2A1ll Manuals Search And Download.  
Acer America Corporation  
333 West San Carlos St., San Jose  
CA 95110, U. S. A.  
Tel : 254-298-4000  
Fax : 254-298-4147  
Federal Communications Commission  
Declaration of Conformity  
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two  
conditions: (1) this device may not cause harmful interference, and (2) this device must  
accept any interference received, including interference that may cause undesired  
operation.  
The following local Manufacturer /Importer is responsible for this declaration:  
Product:  
LCD Monitor  
G205HV  
Model Number:  
SKU Number:  
(“*” = 0~9, a ~ z, or A ~ Z)  
G205HV********  
Name of Responsible Party:  
Address of Responsible Party:  
Acer America Corporation  
333 West San Carlos St.  
San Jose, CA 95110  
U. S. A.  
Contact Person:  
Phone No.:  
Fax No.:  
Acer Representative  
254-298-4000  
254-298-4147  
Download from Www.SomanualsE.coNm-.2A2ll Manuals Search And Download.  

3M Intercom System C1060 User Manual
Accusplit Heart Rate Monitor 605XE User Manual
ACR Electronics Marine Safety Devices 2882 User Manual
AEG Cooktop 84602 G User Manual
AEG Washer 1003 803 User Manual
Allied Telesis Switch x900 12x User Manual
Allstar Products Group Garage Door Opener MVP User Manual
Amana Microwave Oven AMV2175CB User Manual
Amana Range Coil User Manual
ATN Binoculars ATN NVG7 User Manual