ADT Security Services Home Security System 200 Plus User Manual

Security System  
User Guide  
FOCUS 200 PLUS  
Commercial Fire & Burglary  
Alarm System  
F200PA  
REV 4.4  
K3693-1SIA 1/07  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Overview  
Introduction  
The ADT FOCUS200 PLUS is a user-friendly security system that  
monitors your site’s detectors and alarms. Fully programmable, the  
FOCUS200 PLUS allows you to control hundreds of critical security  
functions from one menu-driven interface as simple to use as the automated  
teller machine (ATM) at your local bank.  
The ADT FOCUS200 PLUS consists of a central control unit, an operating  
panel, and up to 255 protection points. The control unit is protected by a  
heavy-gauge steel cabinet and protected by a tamper sensor. While  
monitoring protection points 24 hours a day, the controller itself is  
electronically monitored by trained ADT personnel. If a hazard or security  
breach occurs, the appropriate authorities (police, fire) are alerted. In case of  
a maintenance problem, ADT service personnel can also be notified.  
All functions are accessed through the system operating panels or through  
card/key readers.  
FOCUS200 PLUS Features  
Attractive, easy-to-use, menu-driven operating panel.  
Up to 255 protection points in as many as eight independent groups from  
one central location.  
Manual activation or deactivation of any function.  
Ability to turn group(s) on in either the AWAY or STAY mode. STAY  
mode automatically bypasses certain point types. Check with your ADT  
service technician to see if your system contains any of these point types.  
Ability to bypass points for maintenance or service.  
Ability to program automatic activation/deactivation of security groups.  
– 3 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Overview (cont’d)  
Capacity of up to 255 individual operating panel users, each having  
various security privileges.  
Capacity of up to 999 individual card/key reader users, each having  
various levels of access.  
Control and recording of employee access to workplace areas along with  
time and date.  
Recording of security-related activities.  
Ability to send messages to up to 8 paging services.  
Ability to trigger a panic by pressing the or # key on the operating  
panel.  
Although the FOCUS200 PLUS has many powerful features, ADT has  
designed the system to operate as close to “turnkey” as possible. Once the  
FOCUS200 PLUS is set up for your site, operators will need only swipe or  
insert a card or key, or enter a six-digit ID code once or twice a day.  
Control Unit  
The FOCUS200 PLUS control unit – the brains of your security system –  
is a powerful microcomputer that manages every function of your security  
system. All information about your site’s security is stored in this unit.  
Operating Panel  
The FOCUS200 PLUS operating panel was designed for intuitive, efficient  
operation by personnel with little or no experience using security systems.  
All operations are accessed through four sequential menus.  
The "?" key on each menu provides context-specific help. The QUICK  
START section will help even the most instrument-shy operator get up to  
speed in under an hour.  
4 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Overview (cont’d)  
Protection Points and Groups  
The FOCUS200 PLUS monitors up to 255 protection points in up to eight  
independent fire and burglary groups. The system lets you designate group  
names in ways that make sense for your specific needs. For example, “Office”  
and “Warehouse” could cover two sets of entry doors that activate/deactivate  
independently.  
Turning groups on and off allows different tasks to be carried out at different  
times of day, all while maintaining the optimal level of safety and security.  
By scrolling through the FOCUS200 PLUS menu options, you may turn  
groups on/off in the AWAY or STAY mode, or bypass points at any time for  
maintenance or servicing. The system also allows you to check points or  
groups to review their status, and alerts you to the precise location of an  
activated alarm. Although some features may be manually activated or  
deactivated at any time, FOCUS200 PLUS also features powerful  
scheduling capabilities for automated, worry-free operation.  
The combination of point/group control and scheduling features allows  
operators of the system to construct versatile scenarios quickly and with no  
previous programming knowledge.  
NOTE: Keypads assigned to group 1 will duplicate all entry, exit, and alarm  
sounds generated by the keypads assigned to other groups.  
User Access and Security  
Each FOCUS200 PLUS card/key reader acts as a security gateway to your  
workplace, or to a specific area where certain employees have access and  
others do not. This feature, which operates on manual-input codes, Wiegand,  
proximity, magnetic cards, or Marlok keys, allows tracking of all security-  
related activities, either through a continuous printout or by accessing the  
1000-event history log. The FOCUS200 PLUS supports up to 999 different  
users (maximum 255 user codes, the rest are access cards only) and various  
levels of security with all the flexibility you will need to assure that every  
employee has the proper level of access to the workplace areas.  
– 5 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Overview (cont’d)  
Automated Event Recording and Printing  
The ADT FOCUS200 PLUS provides complete documentation and event-  
recording capabilities. The system prints all desired events and stores the  
last 1000 system events in memory. The types of events recorded in the  
memory are:  
Changes in the system  
status.  
Use of a card/key reader.  
Activation/deactivation of  
points or groups.  
Modifications to user or system  
data.  
In addition to the 1000-event history log, you may obtain a real-time printout  
of all events at multiple remote printers.  
The system’s powerful data-handling capabilities are indispensable for:  
Keeping track of system  
status  
Verifying workplace safety and  
security  
Assuring smooth operation  
Documenting employee access.  
Summary  
ADT’s FOCUS200 PLUS offers the security industry’s best combination of  
versatility, value, and ease of use. It handles all your site’s security and  
access control needs through a pleasant, intuitive, menu-driven user  
interface. Although the system uses a powerful microprocessor, it was  
designed so that non-technical personnel can easily access all its features.  
The QUICK START section is meant as a guide to introduce new users to the  
operation of the FOCUS200 PLUS operating panel. After reading QUICK  
START and working through the exercises (a process that should take less  
than one hour), the user will be familiar with all of the system’s most  
important functions and operations. Advanced operations and specific ways  
to get the most out of the system are covered in the rest of this manual.  
6 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
False Alarm Prevention  
Introduction  
In recent years the pace of electronic development of security systems has  
greatly accelerated. This has brought the price range of reliable monitored  
security systems to a level that is affordable to most households and nearly  
all businesses. As a result, the number of security systems installed is  
expanding swiftly.  
Since these security systems are a most significant deterrent to unwanted  
intrusion, structures protected by security systems are generally safer than  
those without; this is a benefit to both the residents and the local law  
enforcement.  
However, from time to time, many security system users operate their  
system improperly and an alarm signal is generated in error. This situation  
is referred to as a “false alarm.”  
When a security system monitoring center receives an alarm signal, your  
local police and/or fire department will be advised that there is an emergency  
at your location requiring their timely response. Even if each user has only  
one false alarm every two years, the police could potentially be called upon to  
respond to nearly ten million false alarms each year. In most cities, more  
than 90 percent of all alarms reported to the police are FALSE! In many  
cities, the police spend as much as 15 percent of their time and resources on  
false alarm-generated “wild goose chases.” In turn, this:  
Diverts police and/or fire department personnel from legitimate calls.  
Puts the community members at unnecessary risk.  
Wastes taxpayers' money.  
Embarrasses the security system user.  
Diverts and wastes security company resources.  
7 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
False Alarm Prevention (cont’d)  
Statistics verify that more than 75% of all false alarms are caused by  
alarm system operators  
Of these, at least 7 out of 10 are simple errors made by a user while turning  
the system on or off or when leaving or entering the building. Other typical  
causes are:  
Entering an area or opening a door or window whose protection has been  
turned on.  
Animals or large insects roaming through areas with protection turned  
on.  
False alarms on fire-monitored systems are typically caused by burning food,  
heavy smoking in a room, or steam from a shower.  
Working as a team, you and ADT must have a goal of zero false alarms  
In many cities, the municipal government and police department are  
attempting to make alarm system users more aware of their responsibility to  
reduce false alarms by:  
Requiring permits for alarm system users issued by licensed security  
companies.  
Charging fines for multiple false alarms and, in some areas, escalating  
fines if false alarms persist.  
Refusing to respond to an alarm when the rate of false alarm signals  
remains high.  
You must help eliminate false alarms  
By installing this dependable, state-of-the-art FOCUS200 PLUS system,  
which is monitored by ADT Security Systems, you have already taken the  
first step.  
8 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
False Alarm Prevention (cont’d)  
Additional steps are to carefully read and understand this manual, to  
become thoroughly familiar with your system by practicing entry and exit  
commands, and to learn how your monitoring system can become part of  
your workday lifestyle. Learn your Personal Identification Number (PIN),  
which is necessary when you communicate with your ADT Customer  
Monitoring Center. Then teach all others who will be using the system.  
Make sure they are confident they can flawlessly operate the system and are  
able to promptly cancel a false alarm, should one occur. All users must be  
very familiar with the operating procedure to cancel false alarms.  
Preventing causes of false alarms  
The ADT brochure entitled Helping You Prevent False Alarms refers you to  
this manual for any of several actions you may take to prevent false alarms.  
These actions are listed below:  
1. When You Test Your System: Follow the procedure under the heading  
TESTING THE SYSTEM in this manual. Make certain your system is  
“out of service” before you start testing the various sensors.  
2. If You Move to a Different Building: ADT offers a special  
consideration to customers who move, provided you give to your local  
ADT representative the name of the party that purchases or leases your  
present building. Do not take your operating panel or any part of your  
system with you. Ask ADT to take your system out of service just before  
the new party takes ownership of your present building.  
3. If You Get a Watchdog: Nearly all types of animals can cause false  
alarms. If you get a watchdog or have other animals, do not allow them  
into a room with an area sensor when your system is turned on.  
4. If You Hire Janitorial Help: Assign a special user code to each janitor,  
and enter the code into the system using the procedure under the  
heading SYSTEM PROGRAMMING in this manual. Carefully train your  
help to turn the system on, turn it off, and cancel false alarms. They  
must also understand the entry and exit delays and be able to respond to  
a verification call from your ADT Monitoring Center.  
9 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
False Alarm Prevention (cont’d)  
5. If You Fumigate Your Building: The chemical fog used in the  
fumigation process may be sensed as smoke by fire alarm smoke  
detectors and may also adversely affect area sensors. Therefore, be sure  
to notify ADT BEFORE starting.  
6. If You Change Your Telephone: Changes in the location of the  
telephone outlets or telephone numbers could compromise the  
effectiveness of your security system. Have an ADT service technician  
inspect your system immediately after any such changes.  
7. If You Install Anything Near Any System Device: If you install any  
electrical or electronic equipment within a few feet of any element of your  
security system, it could cause the security equipment to malfunction.  
Discuss such installation plans with an ADT service technician prior to  
proceeding with the installation.  
8. If You Remodel or Renovate Your Building: During the course of  
remodeling or renovating, there are often changes in telephone and/or  
electrical circuits. In addition, large clouds of construction dust are  
generated. Any of these can compromise the effectiveness of your security  
system.  
In addition, any change in the position of walls, or door or window  
openings may disable certain sensors in your system. A change in the  
location of mirrors, pictures, or other wall hangings, as well as fans or  
large plants, could cause a false alarm when an area sensor is activated  
by movement or reflections of movement.  
Remember to discuss any renovation or redecorating with your ADT  
representative before you start construction or redecorating, and once  
again when you complete it.  
10 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start  
Introduction  
The QUICK START section is designed to familiarize new users with the  
operation of the FOCUS200 PLUS operating panel in under an hour. It  
will introduce you the FOCUS200 PLUS’ four primary menus and guide  
you through the logic behind one or two operations from each menu.  
Think of the QUICK START section as a “crash course” on how to access  
basic menus and functions of your new security system. After reading the  
QUICK START section and going through the exercises, users will be better  
able to define their particular control and programming needs and to  
pinpoint problems, then locate the needed information in this manual and  
follow the specific instructions confidently and efficiently.  
Operating Panel Functions  
The operating panel is the primary interface between you, the operator,  
and the electronic components forming the “brains” of your FOCUS200  
PLUS security system. The panel consists of a liquid crystal display (LCD)  
on the left and a numeric keypad (similar to the buttons on a TouchTone  
phone) on the right. Users can access most FOCUS200 PLUS operations  
through the LCD. Some operations require both the LCD screen and the  
keypad.  
Operating panel functions are divided into three main groups:  
Programming — Operations relate to system settings, user names, user  
ID numbers, schedules, names of points and groups, and time/date  
functions.  
System — Operations allow you to turn burglary protection on and off,  
bypass protection points, respond to system alarms, obtain a history log,  
and extend your site’s close time.  
Test — Operations enable operators to test protection points, security  
groups, and hardware.  
11 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Normal Inactive Screen  
When there are no alarms or troubles and no one is using the operating  
panel, the Normal Inactive Screen will display:  
?  
Front Office  
Moreꢀ  
XXXXXX  
Clearꢀ  
Off  
Enter ID  
12:59pm  
Press the ? to view the Help Screen, which will aid you in responding to  
an alarm or trouble condition.  
The top line of the display will indicate a particular Burglar Alarm (BA)  
group and the second line will indicate that group’s status. To view  
status of other BA groups, press More.  
As you enter your ID code, the system will verify your entry by displaying  
“X.” If you make a mistake entering your ID code, press Clear and re-  
enter the ID code  
12 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Responding to Alarms  
During an alarm, your system’s alarm annunciating devices (bell, siren,  
lights, and/or operating panel, depending on the optional devices you  
selected) will be activated. The operating panel and horns will sound an  
intermittent tone (with a 5-second pause every 10 seconds) to audibly  
annunciate a fire alarm and a steady tone to audibly annunciate a burglary  
alarm.  
BURGLARY NOTE: Do not enter the premises until police arrive. Have a  
key available to let the police in.  
FIRE NOTE:  
If you are on the premises when an alarm occurs,  
EVACUATE IMMEDIATELY.  
HOLDUP NOTE:  
During a holdup or hostage (duress) situation, try to  
remain as calm as possible. All employees should be  
instructed on the operation of holdup devices. Users  
with ID codes should be instructed on the use of the  
Ambush/Hostage and Duress features.  
Viewing Current Alarms  
During an alarm (excluding holdup, hostage and duress alarms), the  
operating panel will display the current alarm by type and point description.  
? 1 Fire Alarm  
Smoke Detector  
No Other Alarms  
Continue  
13 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
To view current alarms, perform the following steps:  
1
Using the operating panel’s numeric keypad, enter a valid ID code to  
display the Action Menu 1 (see page 19) if no burglary groups are on; or  
press the “Turn off” selector button (if burglary groups are on) to  
deactivate all annunciating devices.  
2
3
If any burglary groups are on, complete the steps under “Turning Off  
Burglary Protection” in the SYSTEM OPERATION section. When all  
burglary groups are off, press Continue to display Action Menu 1.  
Press See alarms to display the alarm type, point number, and  
description.  
4
5
Press Prev or Next to display additional alarms.  
Press Quit to display Action Menu 1.  
Entering Your Personal ID Number  
The first step in performing any function within the FOCUS200 PLUS  
system is to enter your personal six-digit ID number.  
To enter a valid ID code, perform the following steps:  
1
Enter your six-digit personal ID number. You should hear a short beep  
after each digit is entered. After your number has been accepted, you will  
hear a longer beep.  
2
Now wait about 15 seconds and try to enter another, random six-digit  
number. What happens now?  
The number is recognized as an invalid ID code and the operating panel  
will display “Code Incorrect, Try Again.”  
3
If you make a mistake, press “Clear” to re-enter the number.  
The operating panel is active for 10 seconds after a valid code is entered. You  
must enter a menu selection within that time or the operating panel will  
deactivate, requiring the input of a valid ID code again. Once you have  
selected a menu item, however, the panel remains active for a full minute  
before becoming inactive. This timeout feature automatically secures your  
FOCUS200 PLUS security system in the event of a distraction or  
emergency that causes you to step away from the operating panel.  
14 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: PANEL ACTIVATION/DEACTIVATION  
Enter your ID code. Count to 15 after you hear the long beep. The  
operating panel should now become inactive. Enter your ID code  
again. As soon as you hear the long beep, press the More selection  
once. The screen should change to the next menu, Action Menu 2  
(see page 21). Wait a few seconds and press More again. You  
should now be on Action Menu 3 (see page 23). Now wait a full  
minute. What happens?  
If you waited a full minute in the last exercise, your operating panel should  
have entered its timeout phase. In other words, you have one minute after  
entering your last menu selection before the operating panel shuts down.  
Hostage  
If this feature has been enabled, you can activate a silent holdup alarm by  
entering the Duress code programmed by your system installer.  
The Navigational Menu Selections  
Each of the four Action Menus has several selections, depending on user  
privilege. Among these are the navigational menu selections, which take you  
from one menu to the next and back again. The two navigational selections  
from these menus are More/First and Quit/Previous.  
The More/First Selection  
The More selection allows you to scroll through the Action Menus. At the last  
menu designation, the More selection changes to First. Selecting First brings  
you back to the first Action Menu. The position (bottom right) of the key does  
not change.  
15 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: THE MORE/FIRST SELECTION  
Enter your ID code and press the More selection three times. You are  
now at the last Action Menu screen, and the More selection on the  
screen has changed to First. Choosing First will now bring you back to  
the first Action Menu screen. Repeat the steps two or three times to  
verify that you have seen each screen before.  
The Quit/Previous Selection  
Pressing the menu selection Previous on the bottom left of each Action Menu  
screen returns you to the previous Action Menu. Choosing Quit from Action  
Menu 1 deactivates the operating panel.  
EXERCISE: THE MORE/PREVIOUS SELECTION  
Enter your ID code and press the More selection once, then press the  
Previous selection. You should be back at Action Menu 1. Now choose  
More three times and Previous three times. Again you should be back  
at Action Menu 1. Experiment with the More and the Previous  
selections until you feel comfortable navigating through the four  
Action Menus.  
Now return to the Action Menu 1 (choose Previous until its  
designation changes to Quit). Choose Quit to return to the inactive  
operating panel display.  
Other Navigational Selections  
Later on, when you begin working in the submenus of the FOCUS200  
PLUS system, you will encounter other navigational selections such as  
Enter, Done, Next, Pgdn, and Continue. The first two are used at the end of  
operations such as entering a new group name or changing an ID code. Next,  
Pgdn, and Continue are specific to certain submenus. Their meaning is  
similar to More in the Action Menus (i.e., they move you to the next logical  
step in the programming or operational procedure).  
16 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Summary: Navigational Selections  
Every Action Menu screen contains two navigational selections, More/First  
and Quit/Previous. More/First allows you to scroll forward among the four  
Action Menus, while Quit/Previous brings you to the previous menu screen  
(from screen 2-4) or inactivates the operating panel (from screen 1). If you  
are not completely comfortable with the navigational selections, go back and  
repeat the exercises before continuing.  
Turning BA Groups Off  
When an ID code is entered and any BA (Burglary) group is on, you will be  
presented with the following screen:  
Some BA Groups  
are on  
Code Accepted  
Continue  
Turn Offꢀ  
If you desire to turn off any group, press Turn Off to display groups that are  
on. To scroll through the groups that are on, press Previous or Next. To turn  
off that group, press the key to the right of the group name. Hint: If all BA  
groups you have access to are to be turned off, press All. Repeat the previous  
steps for all groups to be turned off.  
17 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Action Menus 1-4 – Main Features  
Now that you are familiar with the navigational and help features common  
to all FOCUS200 PLUS menus, it’s time to take a closer look at what  
distinguishes one menu from another. To perform all the exercises here, your  
ID code will need to have access to all levels of operation.  
Operating panel Action Menus 1-4 give you access to all the features in your  
security system through just 14 feature selections (three each on Action  
Menus 1 and 2, four each on Action Menus 3 and 4). These 14 selections, in  
turn, lead you logically and intuitively through the system submenus.  
The FOCUS200 PLUS operating panel was designed to maximize  
functionality while eliminating memorization of complex commands; one  
menu leads you to the next — and the next, if necessary — until your  
operation is complete.  
Action Menu 1  
?  
Enter choice:  
Lesson  
Turn onꢀ  
Resetꢀ  
Moreꢀ  
See alarms  
Quit  
Assistance: The “?” Selection  
The FOCUS200 PLUS operating panel provides online assistance.  
Choosing ? from most menus provides definitions, descriptions, and  
assistance in using that menu or screen. For example, choosing ? at Action  
Menu 1 gives online descriptions of choices corresponding to Lesson, See  
alarms, Quit, Turn on, Reset, and More.  
18 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: THE “?” SELECTION  
Scroll through the four Action Menus using the two navigational keys  
discussed earlier. At each screen, choose the ? selection to familiarize  
yourself with the various Help Screens.  
Take a look at Action Menu 1. You now know that this menu contains two  
navigational selections and a help selection. The four feature selections for  
Action Menu 1 are:  
Lesson – Provides context-sensitive information regarding use of  
operating panel, availability of help, and ADT help telephone number.  
See alarms – Lists all current alarms by type, point number, and point  
description.  
Turn on – Activates one, some, or all of the protection groups in either  
the AWAY or STAY mode.  
Reset – Takes you to Reset Submenu 1.  
EXERCISE: LESSON  
Enter your ID code and observe Action Menu 1. Press Lesson. Read  
text, then press More to scroll through text. Note ADT phone number  
on last screen. Press Quit.  
EXERCISE: SEE ALARMS  
See alarms allows you to review all current alarm conditions. Enter  
your ID code and choose See alarms. At this time there are no alarms,  
so the screen will display “No current alarms or trouble points.” If  
there were, an alarm or trouble display would show the condition and  
description of it. Press Next and Previous to scroll through alarms.  
Press Quit to return to Action Menu 1.  
19 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: TURN ON BURGLARY PROTECTION  
Enter your ID code and observe Action Menu 1. Press Turn on.  
Choosing this enables you to turn the group(s) on in either the AWAY  
or STAY mode. Once you select the mode, you can scroll through your  
burglary groups using the Previous and Next selections. Try it. To  
turn specific groups on, press the key to the right of the group name  
when that group’s identification is displayed. To turn on all groups,  
press All. Press Quit to return to Action Menu 1.  
Action Menu 2  
?  
See points  
Change close timeꢀ  
Previous Moreꢀ  
Enter choice:  
Testꢀ  
Action Menu 2 has three feature selections:  
See points – Displays the number, description and current status of  
each protection point.  
Change close time – Changes the close (system on) time of protection  
groups.  
Test – Takes you to the Test Submenu for testing of protection groups,  
points, holdup devices, and/or the bell and display.  
EXERCISE: SEE POINTS  
From Action Menu 2, choose See points to enter a submenu. Press  
Supervisory, Burglary, Holdup, or Fire (depending on services being  
provided). If Burglary is selected, select which group. Press Installed.  
This will show you the first point of the selected service. If there is  
more than one point in this service, press Next to see the next point.  
NOTE: Next and Previous will not be displayed if there is only one  
point in that service. Press Quit to return to Action Menu 2.  
20 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: TEST  
The test function is used for testing points, groups, and alarm  
functions of your security system. To explore this function, enter your  
ID code and enter Action Menu 2 by pressing More at Action Menu 1.  
Press Test to go to the Test Submenu. Press More to display Test  
Submenu 2. Press Quit to return to Action Menu 2.  
Action Menu 3  
?  
Enter choice:  
Historyꢀ  
Bypass  
Status  
Previous  
Timeꢀ  
Moreꢀ  
Action Menu 3 is your starting point for most time-related, power status, and  
bypass functions. It has four feature selections:  
Bypass – Bypasses and unbypasses protection points, displays the  
number of points within each group that can be bypassed, or bypasses  
Vault Vibration Sensor points. Bypassing a point causes the system to  
ignore that point until it is restored to normal operation (unbypassed).  
Bypassing may be used to ignore a malfunctioning device, such as repair,  
maintenance, or construction.  
Status – Checks status of AC power, standby battery power, and the  
telephone line.  
History – Displays or prints the most recent 1000 system events,  
including user, time, and date of the occurrence of each event.  
Time – Displays, modifies, or enters time-related functions such as  
holidays, open/close schedules, daylight savings, current time/date, and  
the open/close schedule in case of an ambush.  
21 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
EXERCISE: BYPASS/UNBYPASS PROTECTION POINTS  
Enter your ID code and press More twice to display Action Menu 3.  
Choosing Bypass leads you to the Bypass selection menu. (You must  
have a Bypass BA privilege. If not, you will not see Bypass). Selecting  
Burglar will bring you to the Group Selection menu for the BA groups.  
You may now scroll through the list of your burglary groups using the  
Previous and Next selections. (This is automatically skipped if only  
one BA group is being used). Choose one of the groups and press the  
key next to the name of the group to display the Bypass Submenu.  
Choose Bypass points to display point number, status, description,  
and additional selector keys. Use Previous and Next to navigate  
through a listing of specific points. To choose a point, press Bypass.  
(Notice that Bypass changes to Unbypass.) Unbypass that point by  
pressing Unbypass. Press Quit to return to Action Menu 1.  
?  
Bypassing:  
Bypass points ꢀ  
See limits ꢀ  
Quit  
Bypass VVS ꢀ  
EXERCISE: HISTORY LOG  
Enter your ID code and scroll to Action Menu 3. To display the last  
100 events by date, time and type, press History and select On this  
screen. The most recent event is displayed first. PgDn displays  
additional information about an event, including the user name,  
point, and group descriptions. PgUp returns you to the original  
information. To scroll through the events, use Prev and Next. At any  
time you may select Quit to return to the History Selection Menu. To  
obtain a hard copy of the history log, select On printer from this  
menu. Pressing Quit again will return you to Action Menu 1.  
22 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Action Menu 4  
?  
Enter choice:  
SysInfo  
ID codesꢀ  
Name pnt/gps  
Previous  
Loadꢀ  
Firstꢀ  
Action Menu 4 contains four feature selections:  
SysInfo – Displays model number, revision, and date of your FOCUS  
200 PLUS system.  
Name pnt/gps – Displays or changes the name, number, and type of  
each protection point or group.  
ID codes – Changes user names, group access, privileges, card/key  
number, cancel dates, and/or adds/changes the ID code of the first 255  
users.  
Load – Downloads changes into the system from a remote ADT Service  
Terminal.  
EXERCISE: NAME PNT/GPS  
This exercise uses both the menu screens and the numeric keypad.  
Enter your ID code and scroll to Action Menu 4 using the More key.  
Choose Name pnt/gps to display the first BA group description. The  
FOCUS200 PLUS lists groups first, then card/key readers, then  
points. If you are familiar with your protection point ID numbers, you  
may go directly to a point by entering its corresponding three-digit  
number on the keypad.  
Pressing Change now displays the selector keys for entering a new  
description for a point or group from the Character Entry Screen.  
23 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
? FIRST BA GROUP  
Back CHR Forwardꢀ  
Left  
Quit  
POS  
Rightꢀ  
Continueꢀ  
The first line of the screen displays the current name with the cursor  
on the first letter of the description. Use the POS (Cursor Position)  
keys to move the cursor to the right and left through the description.  
Use the CHR (Character) keys to scroll forward and backward  
through the character list (letters, numbers, symbols, and spaces).  
Similarly, you may change characters directly by using the  
alphanumeric keypad, which is organized like the TouchTone dial on  
a telephone.  
Experiment with the alphanumeric keypad. The keypad allows you to  
insert a character, space, number, or symbol at any location within  
the group, point, or user name:  
Letters are entered by pressing the key corresponding to them on the  
keypad. Pressing a key once, twice, or three times enters the first,  
second, or third letter shown on the button. For example, press the 5  
key three times to enter the letter L. The letters Q and Z are the  
fourth letters for the 7 and 9 keys, respectively.  
Numbers are entered by pressing the 0 key once to enter the number  
0, or by pressing the 0 key repeatedly to scroll through the numbers  
until the correct one is displayed.  
Spaces are entered by pressing the 1 key.  
Symbols are accessible by pressing the 1 key and scrolling through  
the entire character set using the CHR (backward and forward) keys.  
Hint: Scrolling through the entire alphabet will take less time if you  
hold the keys down instead of pressing and releasing them.  
24 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick Start (cont’d)  
Summary  
After reading through the Quick Start section and going through the  
exercises, you should be familiar with the operating panel of the FOCUS  
200 PLUS security system. If you are uncertain of any operation, return to  
that part of this section and repeat the exercise.  
25 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview  
Operating Panel  
Your FOCUS200 PLUS security system is controlled through interactive  
operating panels consisting of a numeric keypad for entering data; a four-  
line, 17-character (per line) display; and 8 selector buttons for choosing  
operating functions.  
Numeric Keypad  
Selector Buttons  
Help Button  
1
2
3
ABC  
DEF  
4
5
6
GHI  
JKL  
MNO  
7
8
9
PRS  
TUV  
WXY  
0
Display Screen  
Operating Panel  
Your “key” to the system is your personal 6-digit identification code, which  
provides access to all operating functions. The system can be programmed to  
limit the operational capabilities of each ID code and user.  
As each digit of an ID code is entered from the numeric keypad, the  
operating panel will emit a short beep. When the final digit of a valid ID code  
is entered, the operating panel will emit a longer beep, signifying the ID code  
was accepted.  
Note: If you enter 18 incorrect digits, the operating panel will go into lock-  
out,preventing further entries for 60 seconds.  
26 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview (contd)  
As selector buttons are pressed, the operating panel will display system  
status, selection menus, prompts, and help screens to guide the user through  
the various operational capabilities assigned to that user. The messages  
displayed on the operating panel can be customized by programming unique  
descriptions for the name of each protective point, group of protective points,  
holiday, and users.  
Note: The operating panel remains activefor 10 seconds after the entry  
of a valid ID code. However, pressing a selector button within the initial 10  
seconds extends the activeperiod to 60 seconds.  
Upon entry of a valid ID code, the operating panel will display the first of  
four Action Menus. These Action Menus display all the operating functions  
the user can access. To choose a displayed function, simply press the  
corresponding selector button.  
If you encounter a problem or require additional information during the  
operation of the system, simply press the Help button located in the upper-  
left corner of the operating panel. The display will then provide instructions  
and information associated with the specific items displayed on the screen.  
The use of the "Help" button will not interfere with the system operation in  
process. Press Quit or the upper-left button again to exit the Help display.  
If a system trouble or error message is displayed, refer to the  
TROUBLESHOOTING GUIDE section. It provides a list of these messages,  
a brief explanation of each message, and the required action to resolve the  
problem.  
Note: The contrast of the display screen can be adjusted at any time.  
Simply press the [0] and [#] keys simultaneously which are located on the  
numeric keypad. The contrast adjustment options will be shown on the  
display screen. To increase the contrast, press the CONTRAST (+)”  
selector button. To decrease the contrast, press the CONTRAST (-)”  
selector button.  
27 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview (contd)  
Action Menus  
Upon the entry of a valid ID code, the operating panel will display the first of  
four Action Menu screens. These menus are the starting point for all  
operating functions that can be accessed (except turning off the system). To  
choose a displayed function, simply press the corresponding selector button.  
Action Menu 1  
?  
Enter choice:  
Lesson  
Turn onꢀ  
Resetꢀ  
Moreꢀ  
See alarms  
Quit  
?
Help. Provides information regarding all other items currently  
displayed on the operating panel. Help can be selected at any time  
without interfering with the operation in process.  
Lesson Provides information regarding use of the operating panel and the  
availability of Help messages.  
See alarms Provides a description of all current alarms by type, point number,  
and point description.  
Quit Exits a menu or deactivates the operating panel display.  
Turn on Turns on all or a portion of the system burglary protection groups in  
either the AWAY or STAY mode.  
Reset Resets (clears) alarms and test modes.  
More Displays the next Action Menu, more information, or additional  
operating functions.  
28 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview (contd)  
Action Menu 2  
?  
See points  
Change close timeꢀ  
Previous Moreꢀ  
Enter choice:  
Testꢀ  
See points Displays the number description and current status of each  
protection point.  
Change close time Changes the close time (system on) of a protection group(s).  
Previous or Prev Returns to the previous display.  
Test Tests protection groups, points, holdup devices, and/or bell and  
operating panel display.  
29 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview (contd)  
Action Menu 3  
?  
Enter choice:  
Historyꢀ  
Bypass  
Status  
Previous  
Timeꢀ  
Moreꢀ  
Bypass  
Bypasses (ignores) or unbypasses (restores to normal operation)  
protection points, displays the number of points within each  
group that can be bypassed, or bypasses Vault Vibration Sensor  
(VVS) points.  
Status  
History  
Time  
Checks AC power, standby battery power, and the telephone  
line.  
Displays or prints the 1000 most recent system events  
including user, time, and date for each event.  
Displays, enters, or changes the following time-related  
functions:  
Holiday – The name and date of each scheduled holiday.  
Open/Close – Temporary and permanent daily  
opening/closing schedules and limits (i.e., earliest opening  
and latest closing).  
Daylight – The dates of daylight savings time (spring and  
fall).  
Hstg – The open/close schedule for an ambush condition  
(forced open/close).  
Current – The current time and date.  
30 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation Overview (contd)  
Action Menu 4  
?  
Enter choice:  
SysInfo  
ID codesꢀ  
Loadꢀ  
Name pnt/gps  
Previous  
Firstꢀ  
SysInfo  
Name pnt/gps  
ID codes  
Displays the model number, revision, and date of your  
FOCUS200 PLUS security system.  
Displays or changes the name, number, and type of each  
protection point and group.  
Displays or changes user or group access names, access  
privileges, user card/key numbers, the user ID code of the first  
255 persons, and cancel dates.  
Load  
First  
Loads changes into your system from a remote ADT Service  
Terminal.  
Return to Action Menu 1.  
31 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming  
Introduction  
Your FOCUS200 PLUS security system is easily customized to meet your  
specific security and monitoring requirements. During installation, your  
ADT representative will review all system options and will recommend  
certain features and functions to accommodate your facility and daily  
business routines.  
Certain system features and functions can be reprogrammed (changed) from  
your remote operating panel. However, to program or reprogram your  
system, you must use an ID code that has been assigned with the  
appropriate “privilege level” (see User Data later in this section).  
You can enter, display, add, delete, and/or change system data from your  
operating panel. However, as changes are made, keep accurate and up-to-  
date records to avoid potential errors in the future.  
Note: Certain system features and functions must be controlled from the  
ADT Customer Monitoring Center. Prior to modifying your system, it is  
advisable to check with your ADT Service Representative.  
Your interactive operating panel provides four lines of information and/or  
messages that prompt you through a simple selection process. If you are  
unsure of a procedure, or require additional information or explanation of a  
feature or function, simply press the "Help" selector button. You can use the  
"Help" button at any time without interfering with the operation in process.  
User Data  
Your FOCUS200 PLUS system accommodates up to 255 different six-digit  
ID codes. Users must be assigned an ID code in order to access the operating  
panel. The first two digits represent the user number. The last four serve as  
the Personal Identification Number (PIN), which uniquely identifies the  
person operating the system. Without a valid ID code, a user will not be able  
to access or operate the system.  
32 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Once an ID code is assigned to a user, that user may automatically perform  
the following functions:  
Turn on/off assigned Burglary Protection.  
Test system sounders.  
Test burglary points.  
View/print the system’s history log.  
Each code may also be assigned a specific “Privilege Level(s)” that provides  
access to additional system operating functions (see Assigning Privilege  
Levels later in this section). If a user does not have the privilege to operate a  
function, it will not be displayed as a selection choice.  
Note: Upon installation or initial system setup, one user (e.g., System  
Manager) will be assigned the Privilege Levelto perform the following  
functions:  
Open outside of the schedules (Irregular open).  
Bypass burglar alarm (BA) protection points.  
Change temporary schedules.  
Change permanent daily schedules and the real-time.  
Change, add, and delete user names, ID codes, card/key codes, cancel  
dates, and Privilege Levelsfor users.  
Entering or Changing a User Name  
Use the following procedure to add new users, change an existing user's  
access, or delete existing users from the system.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change names."  
2. Press the More button three times to display Action Menu 4.  
3. Press ID codes to display the User Selection Menu. Note: If ID codes is  
not displayed, you do not have the privilege level of "Can change names."  
Consult your manager or ADT Service Representative.  
33 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
User Selection Menu  
?  
User Name  
Deleteꢀ  
Change  
Nextꢀ  
User xxx  
Prev  
Quit  
4. Press Prev or Next to display the specific user name and user number to  
be changed or added.  
Hint: To go directly to the user, enter one-to three-digit user number on the  
numeric keypad.  
5. Press Change to display the Character Entry Screen to change the user  
name.  
The first line of the screen displays the current name with the cursor on the  
first letter of the description.  
6. Use the POS (Cursor Position) keys to move the cursor to the right and  
left through the description. Use the CHR (Character) keys to scroll  
forward and backward through the character list (letters, numbers,  
symbols, and spaces).  
Similarly, you may change characters directly by using the alphanumeric  
keypad, which is organized like the TouchTone dial on a telephone.  
Letters are entered by pressing the key corresponding to them on the  
keypad. Pressing a key once, twice, or three times enters the first,  
second, or third letter shown on the button. For example, press the 5 key  
three times to enter the letter L. The letters Q and Z are the fourth  
letters for the 7 and 9 keys, respectively.  
Numbers are entered by pressing the 0 key once to enter the number 0,  
or by pressing the 0 key repeatedly to scroll through the numbers until  
the correct one is displayed.  
34 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Spaces are entered by pressing the 1 key.  
Symbols are entered by pressing the 1 key, then using the CHR  
(backward and forward) keys to scroll through the entire character set.  
Hint: Scrolling through the entire alphabet will take less time if you hold  
the keys down instead of pressing and releasing them.  
7. Press Continue to display the User Selection Menu again.  
Repeat steps 4 through 6 to change the name of other users.  
8. Press Quit to display Action Menu 4.  
Deleting a User ID Code  
Use this function to eliminate a user’s access to the security system.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change names."  
2. Press the More button three times to display Action Menu 4.  
3. Press ID codes to display the User Selection Menu. Note: If ID codes is  
not displayed, you do not have privilege level of "Can change names."  
Consult your manager or ADT Service Representative.  
User Selection Menu  
?  
User Name  
Deleteꢀ  
Change  
Nextꢀ  
User xxx  
Prev  
Quit  
4. Press Prev or Next to display the specific user name and user number to  
be deleted.  
Hint: To go directly to the user, enter the one- to three-digit user number  
on the numeric keypad.  
35 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
5. Press Delete to delete the User Name, ID code, Burglary group access,  
privilege levels, card/key code, and cancel date. Note: If Delete is not  
displayed, contact ADT for removal of this user from the system.  
6. Press Continue to display the User Selection Menu again.  
To delete other users, repeat steps 4 through 6.  
7. Press Quit to display Action Menu 4.  
Assigning or Changing User Access  
Use the following steps to assign or change a user’s access to burglary  
groups, privilege levels, ID code, card/key code, and/or code and card cancel  
date.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change names."  
2. Press the More button three times to display Action Menu 4.  
3. Press ID codes to display the User Selection Menu. Note: If ID codes is  
not displayed, you do not have privilege level of "Can change names."  
Consult your manager or ADT Service Representative.  
User Selection Menu  
?  
User Name  
Deleteꢀ  
Change  
Nextꢀ  
User xxx  
Prev  
Quit  
4. Press Prev or Next to display the specific user name and user number to  
be changed or added.  
Hint: To go directly to the user, enter the one- to three-digit user number  
on the numeric keypad.  
5. Press Change to display the desired user name.  
36 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
6. Press Continue to display the first Burglary (BA) group description. This  
screen also shows the user’s access privilege for the BA group displayed  
("Can access & open," "Can access," "Can access irr & open," or "Can not  
access").  
Refer to Table 1: Access Capability later in this section.  
Assigning Burglary Group Access  
7. To change the user’s access and open privilege to the BA group displayed,  
press Change or to display the user’s access privilege to the next BA  
group, press Continue.  
8. To assign access and open privileges for this user to each BA group,  
repeat step 7.  
9. Once you have assigned access to all the BA groups (pressing Continue at  
the last BA group), the operating panel will automatically display the  
Privilege Level Selection Menu.  
Assigning Privilege Levels  
Once an ID is assigned the user may automatically perform the following  
basic functions:  
Turn on/off assigned burglary protection.  
Test system sounders.  
Test burglary points.  
View/print the system’s history log.  
Note: To change the privilege level of a user, an ID code must have this  
capability assigned to it during the initial setup and programming of the  
system by ADT.  
Each code may also be assigned one or more of the following privilege levels:  
Open irregular – Open (turn off) BA group(s) outside of the scheduled  
opening time. A user without this privilege level will trip an irregular  
opening alarm or be denied access if a BA group is turned off before the  
opening time, after the closing time, or on a holiday.  
37 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Bypass BA – Bypass and unbypass all assigned burglary points.  
Change temp sched – Change temporary daily schedules, closing times,  
and limited time changes.  
Change perm sched – Change permanent daily schedules, earliest open  
times, latest closing times, date, and unlimited time changes.  
Change names – Add, change or delete user names, group access,  
privilege levels, ID codes, card/key codes, cancel dates, BA group  
descriptions and point descriptions.  
10. Press Change to select whether the user “Can” or “Can not” perform the  
operating function displayed.  
11. Press Continue to move to the next operating function.  
Repeat steps 10 and 11 until the appropriate privilege level has been  
assigned for each operating function.  
Once you have assigned all privilege levels for this user, the operating panel  
will display “User Name” and whether the user ID code “may” or “may not”  
be changed.  
12. If the user “may” be changed, and you desire to change or assign the  
user's ID code, press Change and continue with step 13. Otherwise, press  
Continue and skip to step 18.  
38 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Table 1: Access Capability  
Access  
Capability  
Time  
Condition of  
BA Group(s)  
Access  
Action  
CMC  
Signal  
Log and  
Print  
Programming  
Required  
Person can open  
and access any  
time.  
Inside or  
Outside  
Schedule  
On  
Open and  
Access  
Opening  
Opening  
Access irr & open  
plus can open  
irregular  
Off  
On  
Access  
No Signal  
Opening  
Access (1)  
Opening  
Same as above,  
but an irregular  
event will be  
flagged for  
access outside  
of schedule  
(PVF).  
Inside  
Schedule  
Open and  
Access  
Access irr & open  
Plus can not open  
irregular  
Off  
On  
Access  
No Signal  
Access (1)  
Outside  
Schedule  
Open and  
Access  
Irregular  
Opening  
(PVF)  
Irregular  
Opening  
Off  
On  
Access  
No Signal  
Irregular  
Access  
Person can open  
and access, but  
only within  
Inside  
Schedule  
Open and  
Access  
Opening  
Open and  
Access  
Can access &  
open plus can not  
open irregular  
Off  
On  
Off  
Access  
No Signal  
No Signal  
No Signal  
Access (1)  
No Access  
No Access  
schedule.  
Outside  
Schedule  
(2)  
No Access  
No Access  
Person cannot  
open, but can  
access within  
schedule.  
Inside  
Schedule  
On  
Off  
On  
Off  
No Access  
Access  
No Signal  
No Signal  
No Signal  
No Signal  
No Access  
Access (1)  
No Access  
No Access  
Can access plus  
can not open  
irregular  
Outside  
Schedule  
(2)  
No Access  
No Access  
Person cannot  
gain access at  
any time.  
Inside or  
Outside  
Schedule  
On  
Off  
No Access  
No Access  
No Signal  
No Signal  
No Access  
No Access  
Can not access  
Notes: 1. Nothing will be logged or printed if the Log Option = N. Selectable for each reader.  
2. Access can be granted by establishing a temporary schedule.  
39 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Assigning a User ID Code  
The ID code is used to access the operating panel. The first two digits of the  
ID code are the user number. The number to be entered is the unique four-  
digit PIN. Choose a number that is easy to remember, but is still difficult for  
others to guess.  
13. Press Change to display the ID Code Entry screen.  
Note: If this user number has an existing ID code, the existing four-digit  
PIN will not be displayed.  
14. Using the operating panel’s numeric keypad, enter the four-digit user  
PIN. Each digit is displayed as entered.  
15. Press Enter to enter the new user ID code into the system.  
16. Press Continue to assign this user a card/key code (go to step 18 below).  
17. Press Quit to return to Action Menu 4.  
Assigning a User a Card/Key Code  
18. Go to the nearest card/key reader and swipe the card through the reader  
or insert and remove the key. The red lamp on the reader will flash and  
the key or card number will be displayed.  
19. Press Continue if a cancel date is desired, and continue with step 21.  
20. Press Quit to return to the User Selection Menu.  
Assigning a Code and Card Cancel Date  
A date valid for up to one year can be assigned to a user, after which the  
user’s ID code and card/key code will be automatically deleted from the  
system. Use this feature only for temporary help or construction personnel  
who will not need access after a job is completed.  
21. Using the operating panel’s numeric keypad, enter the month (1-12) and  
day (1-31) that this user will be automatically deleted from the system.  
22. Press Enter to enter the new user ID code cancel date into the system.  
23. Press Quit to return to the User Selection Menu.  
40 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Changing the Time and Date  
Your FOCUS200 PLUS security system contains a real-time clock and  
calendar, which must be programmed at the time of installation. Periodically  
check the clock and calendar to ensure their accuracy. The time and date  
may require re-entering if both AC power and battery power have been  
interrupted or disconnected. If a change is required, complete the steps  
below.  
Changing the Current Time  
Note: Before changing the time or date, turn off all BA groups.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Change perm sched" or "Change  
temp sched."  
2. Press More twice to display Action Menu 3.  
3. Press Time to display the Time Selection Menu.  
Time Selection Menu  
? Time:  
Holiday  
Open/close  
Quit  
Daylightꢀ  
Hstgꢀ  
Currentꢀ  
4. Press Current to display the current time and date settings of the system.  
5. Press Change to display the selector buttons “Change time” and “Change  
date.”  
Note: Change will not appear unless all BA groups are off.  
41 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
6. Press Change time to display the time currently set in the system.  
7. Using the operating panel’s numeric keypad, enter the new time.  
Note: Those users who have been assigned only the privilege level of  
Change temp schedare limited to time changes within 5 minutes of the  
current time displayed on the screen.  
8. Press AM or PM to complete your entry and display the new time and  
date.  
9. Press Quit to display the Time Selection Menu.  
Changing the Current Date  
Perform the first 5 steps under the previous heading Changing the Current  
Time and then continue with step 6 here.  
Note: Before changing the time or date, turn off all BA groups.  
6. Press Change date to display the date currently set in the system.  
7. Using the operating panel’s numeric keypad, enter the new date.  
Example: October 7th, 1998 is entered as 100798.  
8. Press Enter to complete your entry and display the new date and time.  
9. Press Quit to display the Time Selection Menu.  
Setting Dates for Daylight Saving Time  
Your FOCUS200 PLUS security system will automatically adjust the real-  
time clock for daylight saving time on the two dates programmed into the  
system. To program those dates do the following:  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Change perm sched" or "Change  
temp sched."  
2. Press More twice to display Action Menu 3.  
3. Press Time to display the Time Selection Menu.  
42 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
4. Press Daylight to display “Spring Daylight” description and programmed  
date.  
5. Press Previous or Next to toggle between “Spring Daylight” description  
and “Fall Daylight” description and the date you want to change.  
6. Press Change to display the selector buttons for entering a new spring or  
fall description.  
7. Press Continue to display current and new date entry field.  
8. Using the operating panel’s numeric keypad, enter the new date.  
Example: April 9th is entered 0409.  
9. Press Enter to complete your entry and display the new date.  
10. Press Quit to display the previous screen. Repeat steps 5 to 9 for the  
second date.  
11. Press Quit to display the Time Selection Menu.  
Daily Operating Schedules  
Your FOCUS200 PLUS system can accommodate two distinct daily  
operating schedules (two opening times and two closing times) for each day  
of the week for each Burglary (BA) group. Daily operating schedules may be  
used to restrict access to the facility and/or system. Users who have not been  
assigned “open regular” privilege will be denied access (key or card access  
control) or will trip an irregular opening alarm if a BA group is turned off  
outside the schedules or on holidays. These schedules also enable your  
system to automatically alert the ADT Customer Monitoring Center if the  
burglary protection was turned on at the proper time. Your system can also  
accommodate schedule limits, which prevent schedule changes that are  
outside the schedule limits.  
43 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Schedules can be permanent or temporary. A permanent schedule is fixed,  
and remains in effect until it is changed (by an authorized user). A  
temporary schedule will override the permanent schedule for one day only. It  
is automatically deleted at midnight of the day it took effect. For example, on  
a Friday, a temporary closing time of 8:00 PM is programmed into the  
system to override the permanent schedule closing time of 5:00 PM. It will  
affect that day’s (Friday’s) schedule only. The 8:00 PM temporary closing  
time will be automatically deleted at midnight, thus restoring the permanent  
closing time of 5:00 PM for future Fridays.  
Changing Daily Operating Schedules  
Use the following procedure to re-program (change) the daily operating  
schedules.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change perm schedule."  
2. Press More twice to display the Action Menu 3.  
3. Press Time to display the Time Selection Menu.  
Time Selection Menu  
? Time:  
Holiday  
Open/close  
Quit  
Daylightꢀ  
Hstgꢀ  
Currentꢀ  
4. Press Open/close to display the “Group Description” selector button.  
5. Press Previous or Next to display the desired “Group Description” of the  
schedule to be changed.  
44 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
6. Press the Group Description button to display the selector buttons "Daily  
schedules" and "Schedule limits."  
7. Press Daily schedules to display the selector buttons "Permanent" and  
"Temporary."  
8. Press Permanent or Temporary to display the current permanent or  
temporary open/close schedule.  
Hint: The system will start display with “today” (Mon-Sun).  
9. Press More to step through the daily schedules and to the specific daily  
schedule you would like to change.  
10. Press Change to display the selector buttons "Open time" and "Close  
time."  
11. Press Open time or Close time to display the open or close schedule entry  
screen.  
12. Using the operating panel’s numeric keypad, enter the new open or close  
time.  
Example: 8:22 is entered as 0822.  
13. Press AM or PM to complete your entry and to display the new open or  
close schedule.  
If Auto On/Off feature has been selected, see Changing Auto On/Off  
Schedule.  
14. Press Change to display the Auto On/Off options, or press Quit to display  
another daily operating schedule.  
Guidelines for Changing Daily Operating Schedules:  
UUUU indicates Unscheduled; enter desired time. NNNN indicates Not  
changeable; the schedule cannot be changed. Refer to your master system user.  
Open times cannot be later than closing times. Closing times cannot be earlier  
than open times.  
Pressing Delete when changing an opening time will tell the system that no  
opening will occur for that schedule. Persons without irregular access privilege  
will be denied access or will create an Irregular Open Alarm.  
45 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Guidelines (continued):  
Pressing Delete when changing a closing time will tell the system that no closing  
will occur for that schedule that day (up to midnight). Use this to tell the system  
when there is an early morning closing the next day. You must also program a  
12:00 AM opening and a closing time (i.e., 3:00 AM) the next day.  
If your schedule is unpredictable, you may need to program a No Close time  
period. Upon opening the group, a timer can be preset with a number of hours  
and minutes you will be open that day. A closing timer will start when 20  
minutes remain. A closing warning will start when only 5 minutes remain. If the  
warning and reminder are ignored, and the group is not closed, a No Close signal  
will be sent to the ADT Customer Monitoring Center. To program a No Close  
time, first select the second schedule for the desired day. Second, delete the  
second opening time by pressing Change, Open time, Delete. Third, enter the  
number of hours and minutes you will be open on that day as the second closing  
time. For example, if you want two hours and 30 minutes, press Change, Close  
time, 0, 2, 3, 0, AM. Repeat the procedure for each day that this feature is  
desired.  
AM is used for less than 12 hours. If 12 to 24 hours is desired, subtract 12 hours  
from the desired length of time, enter the remainder, and press PM. For example,  
if you want 14 hours and 20 minutes, press Change, Close time, 0, 2, 2, 0, PM.  
The No Close time will take effect only when the group is opened. If you want the  
new time to take effect NOW, first turn on the group and then turn it off.  
The programming of the first schedule for each day is optional. If you do program  
the first schedule, openings outside the schedule can be restricted. For example, a  
first schedule opening time of 5:00 AM and a first schedule close time of 10:00  
PM may restrict certain users from midnight to 5AM and from 10PM to  
midnight. Persons who open anytime will be required to close the group in the  
specified time period entered in the second close schedule as specified above.  
Changing Auto On/Off Schedule  
Your FOCUS200 PLUS security system can accommodate an Auto On/Off  
feature. If enabled, the Auto On/Off feature enables your system to  
automatically turn itself on and off according to the daily operating schedule  
(permanent or temporary) that you have assigned. The Auto On/Off  
feature is automatically deleted on holidays and can be cancelled by  
deleting a schedule.  
46 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
For maximum security, the Auto On/Off feature is not recommended. If Auto  
Off is enabled, burglary protection will automatically be turned off  
regardless of unforeseen events, possibly allowing unauthorized personnel to  
enter the premises. If Auto On is enabled, burglary protection will  
automatically be turned on, which could lead to the generation of a false  
alarm if personnel are within a protected area.  
There are four Auto On/Off options that you may select from. It is  
recommended that you discuss these with your ADT Service Representative  
to determine which one, if any would be appropriate for your particular  
application.  
The four options are:  
Manual on  
Manual off  
Manual on  
Manual off  
Automatic off  
Automatic off  
Automatic on  
Automatic on  
Manual: The user must perform the on/off function.  
Automatic: The system automatically performs the on/off function.  
The Auto On/Off feature is separately programmed for each group and daily  
operating schedule. For example, you can select Auto Off for Burglary Group  
1 on Saturday and Sunday only.  
If your system was programmed with the Auto On/Off feature at the time of  
installation, simply follow the steps under Changing Daily Operating  
Schedules. Once you have entered AM or PM at step 13, the display will  
indicate whether the system can or cannot turn itself on or off at that time.  
15. Press More to display the next daily operating schedule to be changed; or  
press Quit to display the Time Selection Menu.  
47 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Changing Open/Close Schedule Limits  
Use the procedure below to change the earliest open times and the latest  
close times for the system.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change perm sched."  
2. Press More twice to display Action Menu 3.  
3. Press Time to display the Time Selection Menu.  
Time Selection Menu  
? Time:  
Holiday  
Open/close  
Quit  
Daylightꢀ  
Hstgꢀ  
Currentꢀ  
4. Press Open/close to display “Group Description” selector buttons.  
5. Press Previous or Next to display the desired “Group Description” of the  
schedule to be changed.  
6. Press the Group Descriptionbutton to display the “Schedule limits”  
selector button.  
7. Press Schedule limits to display the limits currently set in the system.  
8. Press Change to display selector buttons "Earliest open" and "Latest  
close."  
9. Press Earliest open or Latest close to display the current earliest open  
and latest close time.  
10. Using the operating panel’s numeric keypad, enter the new earliest open  
or latest close time (enter hours only).  
48 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
11. Press AM or PM to complete the entry and to display the new schedule  
limits.  
12. Press Change to re-enter an earliest open or latest close time, or press  
Quit to display other schedule options.  
Holiday Description and Dates  
Your FOCUS200 PLUS security system can accommodate up to 14 holiday  
descriptions and dates. Holidays are dates on which your entire facility (all  
BA groups) is closed.  
Any employee who has been assigned the privilege level of "Cannot open  
irregular" will not be granted access (if using card access) or will trip an  
irregular opening alarm if a BA group is turned off anytime during that  
holiday.  
If automatic-off has been selected, groups will not turn off on a holiday.  
Adding or Changing Holiday Descriptions  
To add or re-program (change) holiday descriptions and dates, follow the  
steps below.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change perm sched."  
2. Press More twice to display Action Menu 3.  
3. Press Time to display the Time Selection Menu.  
Time Selection Menu  
? Time:  
Holiday  
Open/close  
Quit  
Daylightꢀ  
Hstgꢀ  
Currentꢀ  
49 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
4. Press Holiday to display holiday descriptions and dates.  
5. Press Previous or Next to display the holiday description and date you  
want to change, or to display an unassigned holiday description and date.  
6. Press Change to display the selector buttons for entering the new holiday  
description.  
The first line of the screen displays the current name with the cursor on the  
first letter of the description.  
7. Use the POS (Cursor Position) keys to move the cursor to the right and  
left through the description. Use the CHR (Character) keys to scroll  
forward and backward through the character list (letters, numbers,  
symbols, and spaces).  
Similarly, you may change characters directly by using the alphanumeric  
keypad, which is organized like the TouchTone dial on a telephone.  
Letters are entered by pressing the key corresponding to them on the  
keypad. Pressing a key once, twice, or three times enters the first,  
second, or third letter shown on the button. For example, press the 5 key  
three times to enter the letter L. The letters Q and Z are the fourth  
letters for the 7 and 9 keys, respectively.  
Numbers are entered by pressing the 0 key once to enter the number 0,  
or by pressing the 0 key repeatedly to scroll through the numbers until  
the correct one is displayed.  
Spaces are entered by pressing the 1 key.  
Symbols are entered by pressing the 1 key then using the CHR  
(backward and forward) keys to scroll through the entire character set.  
Hint: Scrolling through the entire alphabet will take less time if you hold  
the keys down instead of pressing and releasing them.  
8. Press Continue to enter a new holiday date, or press Quit to display  
another holiday description and date.  
50 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
Changing Holiday Dates  
Complete steps 1 through 6 from Adding or Changing Holiday Descriptions.  
7. Press Continue to display the current and new Holiday dates.  
8. Using the operating panel’s numeric keypad, enter the new date.  
Example: January 1 is entered as 0101.  
9. Press Enter to complete your entry and to display the new date.  
10. Press Quit to display the Time Selection menu.  
Group/Point Descriptions  
Change group and point descriptions to define a burglary or other protection  
group, or to tailor group names to suit your specific needs. Change point  
descriptions whenever a sensor is added or moved in the system.  
Follow the steps below to change the group or point descriptions.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change names."  
2. Press the More button three times to display Action Menu 4.  
3. Press Name pnt/gps to display group and/or point descriptions.  
4. Press Prev or Next to display the group or point description and number  
you want to change.  
Note: Group descriptions will be displayed first. Press the Next button to  
scroll through the group descriptions and begin display of point  
descriptions.  
Hint: To go directly to a point, enter the one- to three-digit point number on  
the numeric keypad.  
5. Press Change to display the selector buttons for entering a new  
description.  
The first line of the screen displays the current name with the cursor on the  
first letter of the description.  
51 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Programming (contd)  
6. Use the POS (Cursor Position) keys to move the cursor to the right and  
left through the description. Use the CHR (Character) keys to scroll  
forward and backward through the character list (letters, numbers,  
symbols, and spaces).  
Similarly, you may change characters directly by using the alphanumeric  
keypad, which is organized like the TouchTone dial on a telephone.  
Letters are entered by pressing the key corresponding to them on the  
keypad. Pressing a key once, twice, or three times enters the first,  
second, or third letter shown on the button. For example, press the 5 key  
three times to enter the letter L. The letters Q and Z are the fourth  
letters for the 7 and 9 keys, respectively.  
Numbers are entered by pressing the 0 key once to enter the number 0,  
or by pressing the 0 key repeatedly to scroll through the numbers until  
the correct one is displayed.  
Spaces are entered by pressing the 1 key.  
Symbols are entered by pressing the 1 key, then using the CHR  
(backward and forward) keys to scroll through the entire character set.  
Hint: Scrolling through the entire alphabet will take less time if you hold  
the keys down instead of pressing and releasing them.  
52 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation  
Your FOCUS200 PLUS security system is controlled through operating  
panels conveniently located throughout your facility. See SYSTEM  
OPERATION OVERVIEW section for detailed operating instructions and a  
description of the operating panel.  
Turning On Burglary Protection  
Turning on burglary protection will probably be the most used (and most  
important) operation for most sites. Take extra time to practice securing and  
exiting your premises. Make sure other operators you depend on for site  
closings do the same.  
If the operating panel is located within the protected area, you must enter  
and exit the premises through a pre-determined entry/exit door. If your  
system is programmed with an audible exit delay warning, the operating  
panel will beep (once every second) during the exit delay period. You must  
exit the protected area and close the exit door securely before the exit delay  
expires. A 4-second steady tone indicates the expiration of the exit delay. If  
you are detained and hear the 4-second tone, return to the operating panel,  
re-enter your ID code, and repeat the process for exiting. If there is no exit  
delay warning programmed for the group you are in, but you are arming  
multiple groups, some of which have exit delay warning, you will hear the  
exit delay warning at your keypad.  
Note: If you do not exit the protected area prior to the expiration of the exit  
delay, an exit failsignal will be transmitted to the ADT Customer  
Monitoring Center.  
The system can be turned on in either the AWAY or STAY mode. The STAY  
mode automatically bypasses certain point types. Check with your ADT  
service technician to see if your system contains any of these point types.  
Turning On ALL Burglary Groups  
Before turning on, be sure to secure (or bypass) all protection points.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
53 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation (contd)  
Action Menu 1  
?  
Enter choice:  
Lesson  
Turn onꢀ  
Resetꢀ  
Moreꢀ  
See alarms  
Quit  
2. Press Turn on to display Arming Mode screen (if STAY mode is enabled).  
3. Select which arming mode (AWAY or STAY).  
4. Press All to turn on all Burglary groups.  
5. Secure and exit premises prior to the expiration of the exit delay (if  
applicable).  
Turning On One or More Burglary Groups  
Use this function to turn on certain groups and leave others inactive. This is  
especially useful during opening and closing times. After turning off all  
Burglary groups, the first person on site may wish to turn a few Burglary  
groups back on before the rest of the employees arrive. For example, they  
may re-activate door alarms, but leave motion detectors inactive.  
Before turning on, be sure to secure (or bypass) all protection points.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
2. Press Turn on to display Arming Mode screen (if STAY mode is enabled).  
3. Select which arming mode (AWAY or STAY). The system displays the  
Burglary group status.  
4. Press Previous or Next to display the specific Burglary group to be  
turned on.  
54 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5. Press the Group descriptionbutton to turn on that specific group.  
System Operation (contd)  
6. Press Continue to display Action Menu 1.  
7. Repeat steps 2 through 5 to turn on additional groups.  
8. If an outside sounder is installed and optioned, wait to hear a short  
“ding” before leaving. The sounder's failure to annunciate the "ding"  
indicates ADT has not received the closing signal.  
Turning On One or More Burglary Groups Using a Key or Card Reader  
Before turning on, be sure to secure (or bypass) all protection points.  
1. Press the Next button at or near the entry door and exit the premises.  
The red lamp above the button will start to flash.  
Note: Failure of the light to flash indicates a door or window is open.  
Secure (or bypass) all protection and retry.  
2. Within one minute, insert and swipe the access key or card. The red lamp  
on the exit button will illuminate steadily. If you are using a key, turn  
the key and lock the door.  
Note: If the red lamp does not light, the system has not armed. If you  
are using a key, the cylinder will not turn and the door will not lock.  
Secure (or bypass) all protection and retry.  
3. If an outside sounder is installed and optioned, wait to hear a short  
“ding” before leaving. The sounder's failure to annunciate the "ding"  
indicates ADT has not received the closing signal.  
Turning Off Burglary Protection  
If the operating panel is located within the protected area, enter through a  
pre-determined entry door. The operating panel will emit a steady tone  
indicating the entry delay.  
Note: If you do not turn the system off prior to the expiration of the entry  
delay (steady tone stops), an alarm signal will be transmitted to the ADT  
Customer Monitoring Center.  
55 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation (contd)  
Turning Off ALL Burglary Groups  
Note: All Burglary groups in alarm or entry delay will be automatically  
turned off when a valid ID code is entered. All other Burglary groups must  
be turned off manually.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display the Turn Off Menu.  
Turn Off Menu  
Some BA Groups  
are on  
Code Accepted  
Continue  
Turn Offꢀ  
2. Press Turn off to display Burglary group description and additional  
selector buttons.  
3. Press All to turn off all Burglary groups.  
4. Press Continue to display Action Menu 1.  
Turning Off One or More Burglary Groups  
Note: All Burglary groups in alarm or entry delay will be automatically  
turned off when a valid ID code is entered. All other Burglary groups must  
be turned off manually.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display the Turn Off Menu.  
2. Press Turn off to display Burglary group description and additional  
selector buttons.  
56 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press Previous or Next to display the specific Burglary group to be  
turned off.  
System Operation (contd)  
4. Press the Group descriptionbutton to turn off that specific group.  
5. Repeat steps 2 through 4 to turn off additional groups.  
6. Press Continue to display Action Menu 1.  
Turning Off One or More Burglary Groups Using a Key or Card Reader  
1. Insert or swipe the access key or card. The green lamp will illuminate on  
the key/card reader. If you are using a key, turn the cylinder to unlock  
the door. If you are using a strike, pull the door open.  
Note: If the green lamp does not light and the red lamp winksout  
momentarily, it indicates the system is rejecting the access attempt.  
The system can reject access for the following reasons:  
a. User does not have “irregular open” privilege, and the present time is  
outside the schedule or is a holiday.  
b. “Lockout” option is selected, and the present time is outside the  
schedule or is a holiday.  
c. User does not have “open” privilege, and group(s) are on.  
d. User does not have “access” privilege to this group or area.  
Resetting Current Alarms  
Resetting alarms is used after one or more alarms have been activated and  
you have determined that the situation has returned to normal.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1 (if no Burglary groups are on) or the Turn Off  
Menu (if Burglary groups are on) and to deactivate all annunciating  
devices.  
2. If Burglary groups are on, complete the steps under the heading Turning  
Off One or More Burglary Groups. When all Burglary groups are off,  
press Continue to display Action Menu 1.  
57 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press Reset to display the reset choices.  
System Operation (contd)  
4. Press Alarms to reset all points to which you have access. The display  
will indicate if all points have or have not been reset.  
5. If all points have not been reset, press See points to display those points  
that have not been reset. Inspect those points and correct the problem.  
6. If all points have been reset, press Continue to display Action Menu 1.  
Triggering a Panic  
A panic can be triggered by pressing the or # key on an operating panel.  
The panic can be setup for either silent or audible and to send a message to  
the CCC. Ask your installer if the panic features have been setup in the  
system.  
System History Log  
Your FOCUS200 PLUS security system stores up to 1000 system events,  
including the user, time, and date of each occurrence. The history log  
includes the following events:  
Opening/closings of Burglary groups (including the name of the users).  
Schedule changes (including the name of the user who made the change).  
Alarms, by description and number of Burglary group and point.  
Trouble conditions, by description and number of point.  
Bypassed and unbypassed points, by description and number of Burglary  
group and point (including the name of the user who performed the  
function).  
Name of the user requesting the printout of the history log.  
Results of point tests.  
Optionally, all card/key accesses per reader.  
Viewing the History Log  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
2. Press More twice to display Action Menu 3.  
58 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Press History to display the History Selection Menu.  
System Operation (contd)  
History Selection Menu  
?  
See history:  
On this screenꢀ  
On printerꢀ  
Quit  
4. Press On this screen to display the last 1000 system events (in  
chronological order, beginning with the most recent event). The events  
are displayed by date, time, and type.  
5. Press PgDn to display additional information, including the user name,  
point, and group description.  
6. Press PgUp to display the original event information.  
7. Press Prev or Next to display additional events in the history log.  
8. Press Quit to display the History Selection Menu.  
9. Press Quit to display Action Menu 1.  
Printing the History Log  
If a printer is installed, turned on and selected complete steps 1 through 3 in  
Viewing the History Log. Then perform following steps:  
4. Press On printer to display the printing options.  
5. Press Last 60 events or Last 1000 events to print the desired number of  
events.  
6. The display will prompt you to check your paper supply (2 sheets to print  
60 events or 20 sheets to print 1000 events).  
7. Press Start print to begin printing the history log.  
59 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
8. Press Stop print to stop the printing of the history log; or press Continue  
to display Action Menu 3.  
System Operation (contd)  
History Log Alpha and Event Codes  
Description  
Alpha  
System Event  
System Reset  
Reset Memory  
AC Fail  
RESET  
RESET MEM  
AC FAIL  
AC Restore  
AC RESTORE  
AC FAIL 4H  
AC 4H RST  
AC Fail 4-Hour  
AC Fail 4-Hour Restore  
Telco Line Cut (built-in dialer)  
Telco Line Cut Restore (built-in dialer)  
Telco Line Cut (backup dialer)  
Telco Line Cut Restore (backup dialer)  
Communication Failure (built-in dialer)  
Communication Failure Restore (built-in dialer)  
Communication Failure (backup dialer)  
Communication Failure Restore (backup dialer)  
Telco Line Trouble (AC module)  
Telco Line Restore (AC module)  
Low Battery System  
TEL T MCUT  
TEL R MCUT  
TEL T BCUT  
TEL R BCUT  
TEL T MCOM  
TEL R MCOM  
TEL T BCOM  
TEL R BCOM  
TEL T ACOM  
TEL R ACOM  
LOW BAT  
Low Battery System Restore  
BATTERY RS  
CHARG FAIL  
CHARG RST  
CH DATE  
Battery Charger Fail  
Battery Charger Restore  
Change Date  
Expansion Module  
Interactive Keypad Tamper  
Interactive Keypad Trouble - Supervision  
Interactive Keypad Trouble Restore  
Cardreader Alarm  
KEYPAD ALM  
KEYPAD TBL  
KEYPAD RST  
READER ALM  
READER TBL  
Cardreader Trouble  
60 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation (contd)  
Description  
Expansion Module (continued)  
Cardreader Trouble Restore  
Alpha  
READER RST  
GATEWAY AL  
GATEWAY TB  
GATEWAY RS  
PRINTER AL  
PRINT TBL  
Point Gateway Tamper Alarm  
Point Gateway Trouble - Supervision  
Point Gateway Trouble Restore  
Printer Tamper Alarm  
Printer Trouble – Supervision  
Printer Trouble Restore  
PRINT RST  
RF Low Battery  
RF LOW BAT  
Downloading  
DLL Aborted  
DLL ABORT  
START DLL  
DLL INTER  
END DLL AL  
DLL COMM F  
END DLL NA  
Start DLL  
DLL Interrupted  
End DLL Altered  
DLL Comm Fail  
End DLL Not Altered  
Burglary  
BA Burglary Alarm  
BURGLAR AL  
BA BYPASS  
BURGLAR RS  
BURGLAR TB  
BA UNBYP  
BA Burglary Point Bypass  
BA Burglary Alarm Restore  
BA Burglary Point Trouble  
BA Burglary Point Unbypass  
Open/Close  
BA Auto Close  
AUTO CLOSE  
AUTO CL BY  
TBL CLOSE  
BYP CLOSE  
CLOSING  
BA Auto Close with Bypass – within Group  
BA Trouble Closing (closed with burglary alarm during exit)  
BA Bypass Closing – within group  
BA Closing  
BA Auto Open  
AUTO OPEN  
IRR OPEN  
BA Irregular Opening  
61 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Alpha  
OPENING  
BA Opening  
System Operation (contd)  
Description  
Alpha  
Open/Close (continued)  
BA No Close – Scheduled close time expired  
BA Exit Fail – exit error (user)  
NO CLOSE  
EXIT FAIL  
BA Bypass Closing by User  
BYPASS USR  
BA STAY (Local) Arming  
CLOSE STAY  
Fire  
Fire Alarm  
FIRE ALARM  
FIRE TBL  
Fire Trouble  
Fire Alarm Restore  
Fire Alarm Silence  
Fire Point Bypass  
Fire Alarm Point Unbypass  
Supervisory Alarm  
Supervisory Trouble  
Supervisory Restore  
Supervisory Point Bypass  
Supervisory Point Unbypass  
Waterflow Alarm  
Waterflow Bypass  
Waterflow Restore  
Waterflow Trouble  
Waterflow Unbypass  
Panic  
FIRE RST  
FA SILENCE  
FA BYPASS  
FA UNBYP  
CRIT ALARM  
CRIT TBL  
CRITL RST  
CRIT BYP  
CRIT UNBYP  
WF ALARM  
WF BYPASS  
WF RST  
WF TBL  
WF UNBYP  
Holdup Alarm  
HOLDUP ALM  
HOLDUP TBL  
HOLDUP RST  
HU BYPASS  
Holdup Point Trouble – sensor trouble  
Holdup Restore  
Holdup Point Bypass  
Holdup Point Unbypass  
Hostage Alarm – Duress  
HU UNBYP  
HHHHHHHHHH  
62 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Description  
Alpha  
Medical Alarm  
MED ALARM  
MED RST  
Medical Alarm Restore  
System Operation (contd)  
Alpha  
Panic (continued)  
Medical Trouble  
Medical Bypass  
Medical Unbypass  
MED TBL  
UT BYPASS  
U UNBYPASS  
Scheduling  
BA Change Close Time (extend closing)  
CH CLOSE T  
BA Change Open Time  
CH OPEN TM  
CH CLOSE T  
CH AUTO ON  
CH LT CLOS  
CH OPEN TM  
CH TIME  
Change Close Time  
Change Auto-On Level  
Change Latest Close – sent only if closing schedule is altered  
Change Open Time – schedule change  
Change Time – time/date reset  
Other  
Supervised Bell Alarm (remote bell)  
Supervised Bell Trouble (remote bell)  
BELL ALARM  
BELL TBL  
Supervised Bell Trouble Restore (remote bell)  
Remote Power Supply Alarm  
Remote Power Supply Trouble  
Remote Power Supply Trouble Restore  
Keyswitch Alarm  
BELL RST  
POWER ALM  
POWER TBL  
POWER RST  
KEY ALARM  
KET RST  
Keyswitch Trouble  
Keyswitch Restore  
KEY RST  
Janitor Keyswitch Alarm  
JANITOR AL  
JAN TBL  
Janitor Keyswitch Trouble  
Janitor Keyswitch Alarm Restore  
Janitor On Premises – user on premises  
Janitor Off Premises – user on premises restore  
ADT On-Premises  
JAN RST  
JANITOR ON  
JAN OFF  
SERVICE ON  
63 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Alpha  
SER OFF  
ADT Off-Premises  
Tamper Alarm  
TAMPER ALM  
TAMPER RST  
Tamper Restore  
System Operation (contd)  
Description  
Alpha  
Other (continued)  
Tamper Bypass  
TMP BYPASS  
TMP UNBYP  
VVS BYPASS  
VVS UNBYP  
BYP USER  
ACCESS  
Tamper Unbypass  
VVS Bypass  
VVS Unbypass (after 12 AM auto-off)  
Bypass by User  
Keypad Active  
Audible Walk-Test  
AUDIBLE TS  
CH CODE  
Change Code  
Change Early Open  
Change Holiday  
CH ER OPEN  
CH HOLIDAY  
CO ALARM  
CO BYPASS  
CO RST  
Carbon Monoxide Alarm  
Carbon Monoxide Bypass  
Carbon Monoxide Restore  
Carbon Monoxide Trouble  
Carbon Monoxide Unbypass  
Long Range Radio  
CO TBL  
CO UNBYP  
DC Fault  
LR DC FLT  
DC Fault Restore  
Tamper Fault  
LR DC RST  
LR TMP FLT  
LR TMP RST  
LR BAT FLT  
LR BAT RST  
LR VSR FLT  
LR VSR RST  
LR ECP FLT  
LR ECP RST  
LR COM FLT  
Tamper Fault Restore  
Low Battery  
Low Battery Restore  
VSR Fault (antenna)  
VSR Fault Restore (antenna)  
ECP Fault  
ECP Fault Restore  
Communication Fault  
64 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Communication Fault Restore  
Alpha  
LR COM RST  
Access  
2-Man 2ND Person  
Keypad Lockout  
ACCESS 2ND  
KEYPD LOCK  
System Operation (contd)  
Description  
Alpha  
Access (continued)  
Cardreader Irregular Access  
IRR ACCESS  
MAP ACCESS  
DENIED NA  
INVALID NA  
Manual Pushbutton Access – remote arm/disarm opening  
Access Denied Code Known – access denied  
Access Denied Code Unknown – access denied  
System Test  
Walk-Test  
WALK TEST  
BELL TEST  
HU TEST AL  
HU TEST RS  
SRT FA TST  
END FA TST  
SRT BA TST  
END BA TST  
SRT SV TST  
END SV TST  
SRT HU TEST  
END HU TST  
LONG PRINT  
Bell Test  
Holdup Test Alarm  
Holdup Test Restore  
Start Fire Alarm Test  
End Fire Alarm Test  
Start Burglary Alarm Test  
End Burglary Alarm Test  
Start Supervisory Test  
End Supervisory Test  
Start Holdup Alarm Test  
End Holdup Alarm Test  
Long Print  
Short Print  
SHT PRINT  
CRIT TST A  
CRIT TST R  
FIRE TST A  
FIRE TST R  
BA TST AL  
BA TST RST  
Supervisory Test Print – manual trigger test report  
Supervisory Test Restore  
Fire Alarm Test Print  
Fire Alarm Test Print Restore  
Burglary Alarm Test Print  
Burglary Alarm Test Print Restore  
65 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Description  
Alpha  
Holdup Suspicion Print  
Keypad No Access  
Untyped Bypass  
SUSPICION  
NO ACCESS  
UT BYPASS  
U UNBYPASS  
BA WAN  
Untyped Unbypass  
Burglary Alarm Diagnostics  
Fire Alarm Diagnostics  
FA WAN  
System Operation (contd)  
System Test (continued)  
Output Trouble  
OUTPUT TBL  
OUTPUT RST  
POINT TBL  
POINT ALM  
POINT RST  
Output Trouble Restore  
Point Trouble  
Point Alarm – general alarm  
Point Alarm Restore – general alarm restore  
Untyped Diagnostics  
UA WAN  
Burglary Alarm Weak Battery  
Fire Alarm Weak Battery  
Holdup Alarm Weak Battery  
Supervisory Alarm Weak Battery  
Untyped Alarm Weak Battery  
Weak Battery Restore  
B WEAK BAT  
F WEAK BAT  
H WEAK BAT  
S WEAK BAT  
U WEAK BAT  
BAT RESTOR  
Dialer Test  
Dialer Test Report  
DLR TEST  
TBL TEST  
Dialer Test Report with System Trouble Present  
Bypassing/Unbypassing Burglary Protection  
Bypassing a point or part of the burglary protection will cause the system to  
ignore that point or portion of protection until it is unbypassed (restored to  
normal operation) or the system is turned off.  
Bypassing may be required to ignore a malfunctioning device or to allow  
access to permanently secured areas. Only those users assigned the privilege  
level of "Can Bypass BA" may bypass and unbypass protection.  
66 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bypassing Protection Points  
Note: A bypassed point cannot detect intrusion or an alarm condition.  
Before resorting to bypassing a point, attempt to repair or correct the  
problem.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can bypass BA."  
System Operation (contd)  
2. Press More twice to display Action Menu 3.  
3. Press Bypass to display the Bypass Selection Menu 1.  
Bypass Selection Menu 1  
?  
What Type?  
Burglarꢀ  
Special  
Supervisory  
Quit  
Fireꢀ  
Holdupꢀ  
Note: Special, Supervisory, Fire, and Holdup will be displayed only if the  
user has privilege level of "Can bypass FA/HU/SPV."  
4. Press Burglar to display the Group Selection Menu.  
Group Selection Menu  
?  
Which group:  
Group Descriptionꢀ  
Previous  
Quit  
Nextꢀ  
5. Press Previous or Next to display the “Group description” that contains  
the point(s) you want to bypass.  
67 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
6. Press the Group description button to display Bypass Selection Menu 2.  
7. Press Bypass points to display the point number, status, description,  
and additional selector buttons.  
8. Press Prev or Next to display the specific point to be bypassed.  
System Operation (contd)  
Bypass Selection Menu 2  
?  
Bypassing:  
Bypass pointsꢀ  
See limitsꢀ  
Quit  
Bypass VVSꢀ  
9. Press Bypass to bypass the point displayed and to display the “unbypass”  
selector button.  
10. To bypass additional points, repeat steps 8 and 9.  
11. Press Quit to display Action Menu 1.  
Unbypassing Protection Points  
Complete steps 1 through 7 under Bypassing Protection Points. Then perform  
the following steps:  
8. Press Prev or Next to display the specific point to be unbypassed.  
9. Press Unbypass to unbypass the point displayed and to display the  
“Bypass” selector button.  
10. To unbypass additional points, repeat steps 8 and 9.  
11. Press Quit to display Action Menu 1.  
Bypassing/Unbypassing Vault Vibration Sensors (VVS)  
68 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Vault vibration sensors are sophisticated electronic sensors that are  
sensitive to occupant and construction vibrations. If construction is  
scheduled to end by the programmed "Latest Close Time," use the Bypass  
VVS feature to automatically bypass ALL VVS detectors. ALL VVS  
detectors will be automatically unbypassed after 12 midnight. Complete  
steps 1 through 6 under Bypassing Protection Points. Then perform the  
following steps:  
System Operation (contd)  
7. Press Bypass VVS or Unbypass VVS to bypass or unbypass vault  
vibration sensors.  
8. Press Quit to display Action Menu 3.  
Extending Close Time  
Fifteen minutes prior to the scheduled close time, the operating panel will  
beep once per minute to remind you to close (turn on burglary protection). If  
you are unable to turn on the burglary protection, you must extend the close  
time. Extending the close time (temporary schedule change) will override the  
permanent close schedule for one day only. It will be automatically deleted at  
midnight of the day it was entered. To extend the close time, perform the  
following steps:  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change temp sched."  
2. Press More to display Action Menu 2.  
3. Press Change close time to display Burglary group descriptions.  
4. Press Previous or Next to display the specific Burglary group description.  
5. Press the Group descriptionbutton to display the current and new  
close times.  
6. Using the operating panel’s numeric keypad, enter the new close time.  
7. Press AM or PM to complete your entry and to display the new close time.  
8. Press Quit to display the Time Selection Menu.  
69 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Operation (contd)  
Sending Messages to a Pager  
The FOCUS 200 PLUS system can transmit messages to up to 8 paging  
services (typically one for each group). The types of messages are divided  
into 4 categories: System Troubles, Point Troubles, Alarms and Open/Closes.  
Additionally, the system can be programmed to attempt to dial the paging  
service either once or twice (the default is twice).  
The format of the pager message is as follows:  
EEE GGG UUUU  
EEE = Event Code  
GGG = Group Number (001-008)  
UUUU = User Number (for open/closes) or Point Number.  
The possible event codes are:  
111 = Fire Alarm  
500 = Group Failed to Turn ON  
555 = Point or System Trouble  
777 = Group was Turned ON  
222 = Hold-up or Hostage Alarm  
333 = Burglary Alarm  
400 = Group failed to Turn OFF  
444 = Group was Turned OFF  
911 = Personal Emergency (Medical  
Alarm)  
The following is an example of a pager message:  
444 001 0025 Group 1 was turned OFF by user 25.  
70 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Test  
To ensure proper operation of your FOCUS200 PLUS security system, it is  
recommended that you periodically test all devices within your system. You  
can print, display, or audibly annunciate all system tests. Before testing  
protection groups and/or points, turn off the group(s) containing the points to  
be tested.  
Burglary Protection Points (Audible)  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
2. Bypass all protection points to be tested.  
3. Press More to display Action Menu 2.  
4. Press Test to display Test Menu 1.  
5. Press More to display Test Menu 2.  
6. Press Burg pts. audibly to audibly annunciate the test from the operating  
panel and begin the system test. The display will indicate "Test in  
Progress."  
7. Walk through the test areas and activate each protection point to be  
tested. You will hear a beep when all points are secure (normal) and a  
steady tone when a point is activated.  
8. When the test is complete, return to the operating panel and re-enter  
your ID code to display Action Menu 1.  
9. Press Reset to display the reset options.  
10. Press Tests to exit the test mode and to return the system to normal  
operation.  
11. Press Continue to display Action Menu 1.  
12. Unbypass those points that were bypassed for test purposes.  
71 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Test (contd)  
Protection Points (Visual)  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1. Turn off those groups to be tested.  
2. Press More to display Action Menu 2.  
3. Press Test to display Test Menu 1.  
4. Press Sensor points to display types of devices to be tested.  
5. Press Burglar to display Burglary group descriptions.  
6. Press Previous or Next to display the “Group description” to be tested.  
7. Press Group description to begin display of the test instructions.  
8. Press More 3 times to scroll through the test instructions.  
9. Press Start test to begin the system test.  
10. Activate those devices to be tested. One history event will be logged for  
each sensor.  
11. When the test is complete, return to the operating panel and re-enter  
your ID code to display Action Menu 1.  
12. Press Reset to display the reset options.  
13. Press Tests to exit the test mode and to return the system to normal  
operation.  
14. Press Continue to display Action Menu 1.  
15. Press More twice to display Action Menu 3.  
16. Press History to display the history menu and test results.  
72 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Test (contd)  
Protection Groups  
Use this test to determine if the selected Burglary group is ready to turn on.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
2. Press More to display Action Menu 2.  
3. Press Test to display Test Menu 1.  
4. Press Burglary groups to display the "Burglary Group Descriptions."  
5. Press Previous or Next to display the “Group description” to be tested.  
6. Press Group description to test that specific group and to display the  
test results.  
7. Press Quit to display Action Menu 2.  
8. To test additional groups, repeat steps 3 through 7.  
Testing Holdup, Fire, and Supervisory Devices  
Caution: Use care when conducting this test. All holdup, fire, and  
supervisory functions are disabled during this test mode. In the event of a  
security breach or fire, no signals will be sent to the monitoring center.  
1. Using the operating panel’s numeric keypad, enter a valid ID code that  
has been assigned the privilege level of "Can change perm sched" or "Can  
bypass FA/HU/SPV."  
2. Press More to display Action Menu 2.  
3. Press Test to display Test Menu 1.  
4. Press Sensor points to display types of devices to be tested.  
5. Press Holdup, Fire, or Supervisory to display the test instructions.  
6. Press More twice to scroll through burglar device test instructions. Press  
?. Press More twice to scroll through fire, holdup, and supervisory test  
instruction. Press Quit. Press More twice for the remainder of the test  
instructions.  
73 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
System Test (contd)  
7. Press Start test to begin the test.  
8. Activate each Holdup, Fire, or Supervisory device. You will hear a beep  
once per minute as a reminder that the system is in the test mode. A  
history event will be logged for each sensor activated.  
9. Upon completion of the test, return to the operating panel and re-enter  
your ID code to display Action Menu 1.  
10. Press Reset to display the reset options.  
11. Press Test to exit the test mode and to return the system to normal  
operation.  
12. Press Continue to display Action Menu 1.  
13. Check the system history to see that all points tested properly.  
Bell and Operating Panel Display  
Testing the bell and operating panel display will not affect any other  
operation, nor will it interfere with protection from any point or group.  
1. Using the operating panel’s numeric keypad, enter a valid ID code to  
display Action Menu 1.  
2. Press More to display Action Menu 2.  
3. Press Test to display Test Menu 1.  
4. Press More to display Test Menu 2.  
5. Press Bell and display to begin automatic test of your system’s bell and  
display.  
Note: A test pattern of all LCD elements will be shown for 4 seconds, and  
the bell will ring for the last 4 seconds of this 30-second test. Walk to an  
area where the bell can be heard to verify its operation.  
6. The display will indicate the completion of the test.  
7. Press Quit to display Test Menu 2.  
8. Press Quit to display Action Menu 2.  
74 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide  
During operation of your FOCUS200 PLUS security system, your  
operating panel may display error or trouble messages, which restrict system  
operation. To display additional information regarding trouble or error  
messages, press the "Help" selector button ?. The chart below also  
provides a list of these messages, a brief explanation and the required action  
to resolve the problem.  
Note: If a system trouble condition or error message persists, contact your  
ADT Service Representative for assistance.  
Trouble or Error Display  
Description  
Action  
AC electrical power has  
been interrupted or  
disconnected.  
System has battery power only.  
Check the status of AC  
power throughout the  
facility.  
Cannot turn on! AC power is  
off.  
Check that the Central  
Control Unit transformer is  
plugged into an AC  
electrical outlet.  
Check the circuit breaker  
for the Central Control Unit  
AC electrical outlet.  
Your systems standby  
battery is low.  
Cannot turn on! Battery power  
is low.  
Check availability of AC  
power (to re-charge the  
standby battery).  
If AC power has recently  
been interrupted or  
disconnected, it will be  
several hours before the  
standby battery re-  
charges.  
Check that the Central  
Control Unit transformer is  
plugged into an AC  
electrical outlet.  
Check the circuit breaker  
for the Central Control Unit  
AC electrical outlet.  
If AC power has not been  
interrupted or  
disconnected, the  
standby battery may be  
defective.  
75 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide (contd)  
Trouble or Error Display  
Description  
Action  
The user is not authorized  
to perform any function  
until ADT is finished  
working.  
ADT Service personnel working  
on system.  
Check with your ADT  
Service Representative to  
determine completion time.  
A problem exists with the  
systems telephone line.  
System has telephone line  
problem.  
Check other telephones in  
the facility.  
Contact the telephone  
company (if other  
telephones do not work) or  
your ADT Service  
Cannot turn on!  
Communication line trouble.  
Representative (if other  
telephones work) for  
assistance.  
This is a Late Close  
Time to turn on Group  
Descriptionor extend closing  
time.  
Turn the system on.  
OR  
Warning.The operating  
panel will emit a steady  
tone until the closing time  
is changed. If the system  
is not turned on or the  
closing time extended, a  
signal will be transmitted  
to the ADT Customer  
Monitoring Center.  
Extend the closing time.  
Note: You must have an  
ID code with a privilege  
level of "Can change  
temp sched."  
Group interlock option is  
programmed into your  
system.  
Cannot turn on! Group  
Descriptionmust be on first.  
The group displayed must  
be turned on before the  
group you have selected.  
Your system is  
Cannot turn off Group  
DescriptionSchedule locked.  
This group can only be  
turned off during the  
programmed opening  
schedule. Check with your  
Security Manager to  
determine the  
programmed with  
schedule lockoutfor this  
protection group.  
programmed schedule.  
76 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting Guide (contd)  
Trouble or Error Display  
Description  
Action  
Some fire, supervisory, or  
holdup points are  
bypassed.  
Fire, SPV or Holdup points  
bypassed.  
Check with your ADT  
Service Representative to  
determine when they will  
be restored.  
Your system is  
programmed with the  
ADT reset option.  
Cannot turn on! System must  
be reset by ADT.  
Contact your ADT Service  
Representative to reset  
your system.  
User has entered an  
invalid ID code.  
Code incorrect.  
Press Try againbutton  
and re-enter a valid 6-digit  
ID code.  
User has entered 18  
incorrect ID code digits.  
Code incorrect. Keyboard  
locked. Please wait.  
Wait 60 seconds for the  
operating panel lockout to  
expire and re-enter a valid  
ID code.  
There are some abnormal  
protection points within  
the group you selected.  
Cannot turn on! Some points  
are abnormal.  
Press See pointsbutton.  
Inspect and secure (return  
to normal) these points  
befroe turning this group  
on.  
Bypass warning. Too  
many points are  
bypassed, which may  
compromise building  
security.  
Too many points bypassed.  
If you do not have bypass  
capability, check with your  
Security Manager before  
proceeding.  
If you have bypass  
capability, unbypass some  
of these points before  
turning the system on.  
77 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Fire Alarm Application Note  
About Fire Alarm Codes  
There are various fire alarm codes written by industry associations and institutes.  
For example, the National Fire Alarm Protection Association writes the National Life  
Safety Code, also known as NFPA 101. There are other fire alarm codes written by  
other associations or institutes such as BOCA and ICBO that specify whether or not  
a given building or structure type is required to have a fire alarm system and if so  
what fire alarm system functions must be supported. Each state and local  
government jurisdiction adopts in part or in entirety these codes which become that  
jurisdiction’s code.  
In addition there are also standards that govern the design, installation and service  
of fire alarm systems. For instance, the use and placement of smoke and fire  
detection devices is specified in the National Fire Alarm Code. The most popularly  
adopted code is the National Fire Alarm Code, commonly referred to as NFPA 72.  
Code Enforcement  
Codes are enforced by the person who is designated by the state or local government  
as the “Authority Having Jurisdiction,” also simply referred to as the “AHJ.” The  
AHJ has the delegated power to review and interpret the code as it may pertain to a  
particular structure. The AHJ must interpret codes because structures often are not  
uniform. So for example, the AHJ will review a fire alarm design for the correct  
number of smoke detectors and their placement in relation to the structure’s layout.  
ADTs FOCUS 200 Plus Fire Alarm System Capabilities  
The FOCUSCADET security system is Underwriters Laboratories listed for, and  
can support, addressable smoke and fire detection, as well as provide fire alarm  
warning to your premise’s occupants. It is a best fit for many structures that require  
fire alarm in those jurisdictions that allow combination security and fire alarm  
systems.  
ADT can help you with all your fire alarm system requirements. Even if you already  
have a fire alarm system, be sure to involve your local ADT office anytime you are  
renovating or expanding your facility. Your local representative can help you  
determine how to protect your facility whether it be for fire, security, or critical item  
monitoring such as cooler temperatures or storage tank levels.  
78 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Emergency Evacuation  
Establish and regularly practice a plan of escape in the event of fire. The  
following steps are recommended by the National Fire Protection  
Association:  
1. Position your detector or your interior and/or exterior sounders so  
that they can be heard by all occupants.  
2. Determine two means of escape from each room. One path of  
escape should lead to the door that permits normal exit from the  
building. The other should be an alternate escape route such as a  
window, to be used if your normal exit path is impassable. Station  
an escape ladder at such windows if there is a long drop to the  
ground.  
3. Sketch a floor plan of the building. Show windows, doors, stairs,  
and rooftops that can be used to escape. Indicate escape routes for  
each room. Keep these routes free from obstruction and post  
copies of the escape routes in every room.  
4. Assure that all bedroom doors are shut while you are asleep. This  
will prevent deadly smoke from entering while you escape.  
5. Try the door. If the door is hot, check your alternate escape route.  
If the door is cool, open it cautiously. Be prepared to slam the door  
if smoke or heat rushes in.  
6. Where smoke is present, crawl on the ground; do not walk  
upright. Smoke rises and may overcome you. Clearer air is near  
the floor.  
7. Escape quickly; don't panic.  
8. Establish a common meeting place outdoors, away from your  
house, where everyone can meet and then take steps to contact  
the authorities and account for those missing. Choose someone to  
assure that nobody returns to the house — many die going back.  
79 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEDERAL COMMUNICATIONS COMMISSION (FCC) PART 15 STATEMENT  
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital  
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential installation. This equipment generates, uses  
and can radiate radio frequency energy and, if not installed and used in accordance with the  
instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by turning the  
equipment off and on, the user is encouraged to try to correct the interference by one or more of the  
following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
Consult the dealer or an experienced radio/TV technician for help.  
ADDITIONAL TELEPHONE COMPANY INFORMATION  
The security control panel must be properly connected to the telephone line with USOC RJ-31X or  
RJ38X telephone jack and a matching 8-pin modular “Direct Connect Cord.” The FCC prohibits  
customer-provided terminal equipment to be connected to party line or to be used in conjunction with  
coin telephone service. Inter-connect rules may vary from state to state.  
INCIDENCE OF HARM  
In the unlikely event that the communicator should ever cause harm to the telephone network, the  
telephone company will notify the telephone subscriber that temporary discontinuance of service may  
be required; however, where prior notice is not practical, the telephone company may temporarily  
discontinue service. In the case of temporary discontinuance, the telephone company shall promptly  
notify the telephone subscriber, who will be given the opportunity to correct the situation. The  
customer also has the right to bring a complaint to the FCC if he feels the disconnection is  
unwarranted.  
If your telephone equipment causes harm to the telephone network, the telephone company may  
discontinue your service temporarily. If possible, they will notify you in advance, but if advance  
notification is not practical, you will be notified as soon as possible. You will be notified of your right to  
file a complaint with the FCC.  
CHANGES IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES  
The telephone company may make changes to its communications facilities, equipment, operations or  
procedures, where such action is reasonably required and proper in its business. Should any changes  
render the communicator incompatible with the telephone company facilities, the customer shall be  
given adequate notice to make modifications to maintain uninterrupted service.  
80 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NOTIFICATION  
All connections to the telephone network must be made through standard plugs and standard  
telephone company jacks, or equivalent, in such manner as to allow for easy and immediate  
disconnection of the alarm equipment. If the connecting cord is unplugged from the jack there shall be  
no interference to the telephone equipment still connected to the telephone network. Notify the  
telephone company if the communicator is removed from the premises and the RJ-31X or RJ38X jack is  
no longer needed.  
MALFUNCTIONS OF EQUIPMENT  
In the unlikely event that the system should ever fail to operate properly, it should be disconnected  
from the RJ-31X or RJ38X jack to determine if the problem is with the telephone network or with the  
security system. If a problem is found with the communicator, leave disconnected until repaired or  
replaced.  
If you experience trouble with the telephone equipment, please contact your ADT Customer Service  
Representative and ask for information on obtaining service or repairs.  
The telephone company may ask that you disconnect this equipment from the network until the  
problem has been corrected or until you are sure that the equipment is not malfunctioning.  
81 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FEDERAL COMMUNICATIONS COMMISSION (FCC) PART 68 NOTICE  
This equipment complies with Part 68 of the FCC rules. On the front cover of this equipment is a label  
that contains, among other information, the FCC registration number and ringer equivalence number  
(REN) for this equipment. If requested, this information must be provided to the telephone company.  
This equipment uses the following jacks:  
An RJ31X is used to connect this equipment to the telephone network.  
The REN is used to determine the quantity of devices which may be connected to the telephone line.  
Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming  
call. In most, but not all areas, the sum of the RENs should not exceed five (5.0). To be certain of the  
number of devices that may be connected to the line, as determined by the total RENs, contact the  
telephone company to determine the maximum REN for the calling area.  
If this equipment causes harm to the telephone network, the telephone company will notify you in  
advance that temporary discontinuance of service may be required. If advance notice is not practical,  
the telephone company will notify the customer as soon as possible. Also, you will be advised of your  
right to file a complaint with the FCC if you believe necessary.  
The telephone company may make changes in its facilities, equipment, operations, or procedures that  
could affect the operation of the equipment. If this happens, the telephone company will provide  
advance notice in order for you to make the necessary modifications in order to maintain  
uninterrupted service.  
If trouble is experienced with this equipment, please contact the manufacturer for repair and warranty  
information. If the trouble is causing harm to the telephone network, the telephone company may  
request you remove the equipment from the network until the problem is resolved.  
There are no user serviceable components in this product, and all necessary repairs must be made by  
the manufacturer. Other repair methods may invalidate the FCC registration on this product.  
This equipment cannot be used on telephone company-provided coin service. Connection to Party Line  
Service is subject to state tariffs.  
This equipment is hearing-aid compatible.  
When programming or making test calls to an emergency number, briefly explain to the dispatcher the  
reason for the call. Perform such activities in the off-peak hours, such as early morning or late evening.  
82 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CANADIAN DEPARTMENT OF COMMUNICATIONS (DOC) STATEMENT  
This Class B digital apparatus complies with Canadian ICES-003  
NOTICE  
AVIS  
The Industry Canada Label identifies certified  
equipment. This certification means that the  
equipment meets telecommunications network  
protective, operational and safety requirements as  
prescribed in the appropriate Terminal Equipment  
l’étiquette d’Industrie Canada identifie le matériel  
homologué. Cette étiquette certifie que le matériel  
est  
conforme  
aux  
normes  
de  
protection,  
d’exploitation et de sécurité des réseaux de  
télécommunications, comme le prescrivent les  
documents concernant les exigences techniques  
relatives au matériel terminal. Le Ministère  
n’assure toutefois pas que le matériel fonctionnera à  
la satisfaction de l’utilisateur.  
Technical  
Requirements  
Department does not guarantee the equipment will  
operate to the user’s satisfaction.  
document(s).  
The  
Before installing this equipment, users should  
ensure that it is permissible to be connected to the  
facilities of the local telecommunications company.  
The equipment must also be installed using an  
acceptable method of connection. The customer  
should be aware that compliance with the above  
conditions may not prevent degradation of service in  
some situations.  
Repairs to certified equipment should be coordinated  
by a representative designated by the supplier. Any  
repairs or alterations made by the user to this  
equipment, or equipment malfunctions, may give the  
telecommunications company to request the user to  
disconnect the equipment.  
Avant d’installer ce matériel, l’utilisateur doit  
s’assurer qu’il est permis de le raccorder aux  
installations  
de  
l’enterprise  
locale  
de  
télécommunication. Le matériel doit également être  
installé en suivant une méthode acceptée da  
raccordement. L’abonné ne doit pas oublier qu’il est  
possible que la conformité aux conditions énoncées  
ci-dessus n’empêche pas la dégradation du service  
dans certaines situations.  
Les réparations de matériel nomologué doivent être  
coordonnées par un représentant désigné par le  
fournisseur. L’entreprise de télécommunications  
peut demander à l’utilisateur da débrancher un  
Users should ensure for their own protection that  
the electrical ground connections of the power  
utility, telephone lines and internal metallic water  
pipe system, if present, are connected together, This  
precaution may be particularly important in rural  
areas.  
appareil  
à
la suite de réparations ou de  
modifications effectuées par l’utilisateur ou à cause  
de mauvais fonctionnement.  
Pour sa propre protection, l’utilisateur doit s’assurer  
que tous les fils de mise à la terre de la source  
d’energie électrique, de lignes téléphoniques et des  
canalisations d’eau métalliques, s’il y en a, sont  
Caution: Users should not attempt to make such  
connections  
themselves  
but  
should  
contact  
raccordés  
ensemble.  
Cette  
précaution  
est  
appropriate electric inspection authority, or  
electrician, as appropriate.  
particulièrement importante dans les régions  
rurales.  
NOTICE:  
The Ringer Equivalence Number  
Avertissement : L’utilisateur ne doit pas tenter de  
faire ces raccordements lui-même; il doit avoir  
racours à un service d’inspection des installations  
électriques, ou à un électricien, selon le cas.  
AVIS : L’indice d’équivalence de la sonnerie  
(IES) assigné à chaque dispositif terminal indique le  
nombre maximal de terminaux qui peuvent être  
raccordés à une interface. La terminaison d’une  
interface téléphonique peut consister en une  
(REN) assigned to each terminal device provides an  
indication of the maximum number of terminals  
allowed to be connected to a telephone interface.  
The termination on an interface may consist of any  
combination of devices subject only to the  
requirement that the sum of the Ringer Equivalence  
Numbers of all the devices does not exceed 5.  
combinaison de quelques dispositifs,  
à
la seule  
condition que la somme d’indices d’équivalence de la  
sonnerie de tous les dispositifs n’excède pas 5.  
83 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING!  
THE LIMITATIONS OF THIS ALARM SYSTEM  
While this system is an advanced design security system, it does not offer guaranteed protection  
against burglary or fire or other emergency. Any alarm system, whether commercial or residential, is  
subject to compromise or failure to warn for a variety of reasons. For example:  
• Intruders may gain access through unprotected openings or have the technical sophistication to  
bypass an alarm sensor or disconnect an alarm warning device.  
• Intrusion detectors (e.g., passive infrared detectors), smoke detectors, and many other sensing  
devices will not work without power. Battery-operated devices will not work without batteries, with  
dead batteries, or if the batteries are not put in properly. Devices powered solely by AC will not work  
if their AC power supply is cut off for any reason, however briefly.  
• Signals sent by wireless transmitters may be blocked or reflected by metal before they reach the  
alarm receiver. Even if the signal path has been recently checked during a weekly test, blockage can  
occur if a metal object is moved into the path.  
• A user may not be able to reach a panic or emergency button quickly enough.  
• While smoke detectors have played a key role in reducing residential fire deaths in the United  
States, they may not activate or provide early warning for a variety of reasons in as many as 35% of  
all fires, according to data published by the Federal Emergency Management Agency. Some of the  
reasons smoke detectors used in conjunction with this System may not work are as follows. Smoke  
detectors may have been improperly installed and positioned. Smoke detectors may not sense fires  
that start where smoke cannot reach the detectors, such as in chimneys, in walls, or roofs, or on the  
other side of closed doors. Smoke detectors also may not sense a fire on another level of a residence  
or building. A second-floor detector, for example, may not sense a first-floor or basement fire.  
Moreover, smoke detectors have sensing limitations. No smoke detector can sense every kind of fire  
every time. In general, detectors may not always warn about fires caused by carelessness and safety  
hazards like smoking in bed, violent explosions, escaping gas, improper storage of flammable  
materials, overloaded electrical circuits, children playing with matches, or arson. Depending upon  
the nature of the fire and/or the locations of the smoke detectors, the detector, even if it operates as  
anticipated, may not provide sufficient warning to allow all occupants to escape in time to prevent  
injury or death.  
• Passive Infrared Motion Detectors can only detect intrusion within the designed ranges as  
diagrammed in their installation manual. Passive Infrared Detectors do not provide volumetric area  
protection. They do create multiple beams of protection, and intrusion can only be detected in  
unobstructed areas covered by those beams. They cannot detect motion or intrusion that takes place  
behind walls, ceilings, floors, closed doors, glass partitions, glass doors, or windows. Mechanical  
tampering, masking, painting or spraying of any material on the mirrors, windows or any part of the  
optical system can reduce their detection ability. Passive Infrared Detectors sense changes in  
temperature; however, as the ambient temperature of protected area approaches the temperature  
range of 90° to 105°F, the detection performance can decrease.  
84 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING!  
THE LIMITATIONS OF THIS ALARM SYSTEM  
(continued)  
• Alarm warning devices such as sirens, bells, or horns may not alert people or wake up sleepers if  
they are located on the other side of closed or partly open doors. If warning devices sound on a  
different level of the residence from the bedrooms, then they are less likely to waken or alert people  
inside the bedrooms. Even persons who are awake may not hear the warning if the alarm is muffled  
from a stereo, radio, air conditioner or other appliance, or by passing traffic. Finally, alarm warning  
devices, however loud, may not warn hearing-impaired people or waken deep sleepers.  
• Telephone lines needed to transmit alarm signals from a premises to a central monitoring station  
may be out of service or temporarily out of service. Telephone lines are also subject to compromise by  
sophisticated intruders.  
• Even if the system responds to the emergency as intended, however, occupants may have insufficient  
time to protect themselves from the emergency situation. In the case of a monitored alarm system,  
authorities may not respond appropriately.  
• This equipment, like other electrical devices, is subject to component failure. Even though this  
equipment is designed to last as long as 10 years, the electronic components could fail at any time.  
The most common cause of an alarm system not functioning when an intrusion or fire occurs is  
inadequate maintenance. This alarm system should be tested weekly to make sure all sensors and  
transmitters are working properly.  
Installing an alarm system may make one eligible for lower insurance rates, but an alarm system is  
not a substitute for insurance. Homeowners, property owners, and renters should continue to act  
prudently in protecting themselves and continue to insure their lives and property.  
We continue to develop new and improved protection devices. Users of alarm systems owe it to  
themselves and their loved ones to learn about these developments.  
85 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
Access Capability....................................... 39  
Action Menu 1 ....................................... 18, 28  
Action Menu 2 ....................................... 20, 29  
Action Menu 3 ....................................... 21, 30  
Action Menu 4 ....................................... 23, 31  
Action Menus................................................ 28  
Action Menus 1-4.......................................... 18  
ADT Customer Monitoring Center................... 9  
ADT Service personnel working on system76  
Assigning a Code and Card Cancel Date..... 40  
Assigning a User a Card/Key Code.............. 40  
Assigning a User ID Code ............................ 40  
Assigning Access to a User.......................... 36  
Assigning Burglary Group Access ................ 37  
Assigning Privilege Levels............................ 37  
Assistance: The ?Selections..................... 18  
Auto On/Off Schedule................................... 46  
Automated Recording and Documenting........ 6  
AWAY......................................................... 3, 5  
BURGLARY NOTE....................................... 13  
Bypass................................................... 21, 30  
Bypass BA................................................... 38  
Bypass Selection Menu 1........................... 67  
Bypass Selection Menu 2........................... 68  
Bypassing Protection Points......................... 66  
Bypassing/Unbypassing Vault Vibration Sensors  
(VVS) ........................................................ 68  
Can change names ...................................... 33  
Cannot turn off Group DescriptionSchedule  
locked ...................................................... 76  
Cannot turn on! Group Descriptionmust be  
on first...................................................... 76  
Cannot turn on! AC power is off................ 75  
Cannot turn on! Battery power is low....... 75  
Cannot turn on! Communication line trouble.  
.................................................................. 76  
Cannot turn on! Some points are abnormal.77  
Cannot turn on! System must be reset by  
ADT. ......................................................... 77  
Change close time................................ 20, 29  
Change names ............................................ 38  
Change perm sched ................................... 38  
Change temp sched....................................38  
CHANGES IN TELEPHONE COMPANY  
EQUIPMENT.............................................80  
Changing Daily Operating Schedules...........44  
Changing the Current Date...........................42  
Changing the Current Time...........................41  
Changing the Time and Date........................41  
Character Entry Screen ................................23  
Character Keys .............................................34  
Code incorrect.............................................77  
Code incorrect. Keyboard locked. Please wait.  
..................................................................77  
CONTRAST ..................................................27  
Control Unit.....................................................4  
Current.........................................................30  
Customer Monitoring Center.........................32  
Daily Operating Schedules ...........................43  
Daylight........................................................30  
Deleting a User ID Code...............................35  
DOC..............................................................83  
Emergency Evacuation.................................79  
Entering Your Personal ID Number...............14  
Event Code ...................................................70  
Extending Close Time...................................69  
Fall Daylight ..................................................43  
False Alarm Prevention...................................7  
False alarms ...................................................8  
FCC PART 15 STATEMENT ........................80  
FCC PART 68 NOTICE ................................82  
Fire Alarm Application Note ..........................78  
Fire Alarm Codes..........................................78  
Fire Alarm System Capabilities.....................78  
FIRE NOTE...................................................13  
Fire, SPV or Holdup points bypassed. ......77  
First ..............................................................31  
FOCUS200 PLUS Features ........................3  
Group Number ..............................................70  
Group Selection Menu................................67  
Group/Point Descriptions..............................51  
History....................................................21, 30  
History Log......................................................5  
History Log Alpha and Event Codes.............60  
History Selection Menu ..............................59  
86 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Spring Daylight..............................................43  
Status .....................................................21, 30  
STAY...............................................................5  
STAY mode...............................................3, 54  
SysInfo ...................................................23, 31  
System has battery power only..................75  
System has telephone line problem. .........76  
System History Log .......................................58  
System Operation Overview..........................26  
System Overview ............................................3  
System Programming....................................32  
System Test ..................................................71  
temporary schedule.......................................44  
Test.........................................................20, 29  
Testing Bell and Operating Panel Display.....74  
Testing Burglary Protection Points (Audible).71  
Testing Holdup, Fire and Supervisory Devices73  
Testing Protection Groups.............................73  
Testing Protection Points (Visual).................72  
Time........................................................21, 30  
Time Selection Menu...................................41  
Too many points bypassed. .......................77  
Troubleshooting Guide..................................75  
Turn Off Menu..............................................56  
Turn on...................................................19, 28  
Turning BA Groups Off..................................17  
Turning Off ALL Burglary Groups..................56  
Turning Off Burglary Groups Using a Key or Card  
Reader ......................................................57  
Turning Off Burglary Protection.....................55  
Turning Off One or More Burglary Groups ....56  
Turning On ALL Burglary Groups..................53  
Turning On Burglary Groups Using a Key or Card  
Reader ......................................................55  
Turning On Burglary Protection.....................53  
Turning On One or More Burglary Groups ....54  
Unbypassing Protection Points .....................68  
User Access and Security...............................5  
User Data......................................................32  
User Name....................................................33  
User Number.................................................70  
User Selection Menu.......................34, 35, 36  
Viewing Current Alarms.................................13  
Viewing the History Log.................................58  
Wiegand..........................................................5  
HOLDUP NOTE............................................13  
Holiday.........................................................30  
Holiday Dates................................................51  
Holiday Description and Dates......................49  
Hstg..............................................................30  
ID codes...........................................23, 31, 32  
INCIDENCE OF HARM.................................80  
Lesson ...................................................19, 28  
LIMITATIONS OF THIS ALARM SYSTEM...84  
Load .......................................................23, 31  
MALFUNCTIONS OF EQUIPMENT .............81  
Marlok keys.....................................................5  
More .............................................................28  
Name pnt/gps ........................................23, 31  
National Life Safety Code .............................78  
Navigational Menu Selections.......................15  
Normal Inactive Screen.................................12  
Open irregular .............................................37  
Open/Close..................................................30  
Open/Close Schedule Limits.........................48  
Operating panel ..............................................4  
Operating Panel............................................26  
Operating Panel Functions ...........................11  
Operating Panel Lock-Out..........................26  
Pager ............................................................70  
pager message .............................................70  
permanent schedule .....................................44  
Permits for alarm system ................................8  
Personal Identification Number (PIN), ............9  
Point Number................................................70  
Preventing causes of false alarms..................9  
Previous.......................................................29  
Printing the History Log.................................59  
Privilege Level...............................................33  
Programming...............................................11  
Protection Points and Groups.........................5  
Quick Start ....................................................11  
Quick Start".....................................................4  
Quit...............................................................28  
Reset ......................................................19, 28  
Resetting Current Alarms........................57, 58  
Responding To Alarms .................................13  
See alarms.............................................19, 28  
See points..............................................20, 29  
Setting Dates for Daylight Saving Time ........42  
Silent holdup alarm .......................................15  
87 –  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LIMITED WARRANTY  
Terms and Conditions Applying to Sale of Equipment  
1.  
Limited Warranty.  
Any part of the system, including the wiring, installed under this Agreement which proves to be defective in material or workmanship within  
90 days of the date of completion of installation will be repaired or replaced at ADT's option with a new functionally operative part. Labor and  
material required to repair or replace such defective components or to make mechanical adjustments to the system will be free of charge for  
a period of 90 days following the completion of the original installation.  
This warranty is extended only to the original consumer purchaser of the system and may be enforced only by such person.  
To obtain service under this warranty, call or write our local ADT Service Department at the telephone number or address found in your local  
yellow pages.  
Service pursuant to the warranty will be furnished only during ADT's normal working hours 8:00A.M. to 4:30P.M., Monday through Friday,  
except holidays. Services rendered outside the normal working hours of ADT are not within the scope of this warranty and any services  
requested to be performed at such times shall be charged for at ADT's then applicable rates for labor and material.  
This warranty does not apply to the conditions listed below, and in the event customer calls ADT for service under the warranty and upon  
inspection it is found that one of these conditions has led to the inoperability or apparent inoperability of the system, a charge will be made for  
the service call of the ADT representative, whether or not he actually works on the system. Should it actually be necessary to make repairs to  
the system due to one of the "conditions Not Covered By Warranty", a charge will be made for such work at ADT's then applicable rates for  
labor and material.  
Conditions Not Covered By Warranty.  
A. Damage from accidents, acts of God, alterations, misuse, tampering or abuse. B. Failure of the customer to properly close or secure a  
door, window, or other point protected by a burglar alarm device. C. Failure of customer to properly follow operating instructions provided by  
ADT at time of installation or at a later date. D. Trouble in leased telephone. E. Trouble due to interruption of commercial power. F. Battery  
replacements.  
This warranty is in lieu of all other express warranties. Any implied warranties of merchantability and fitness for a particular purpose are  
limited in duration to a period of 90 days from the date of completion of installation. The exclusive remedy of the customer hereunder shall be  
repair or replacement as stated above. Under no circumstances shall ADT be liable to the customer or any other person for incidental or  
consequential damages of any nature, including without limitation, damages for personal injury or damages to property, and, however  
occasioned, whether alleged as resulting from breach of warranty by ADT, the negligence of ADT, or otherwise, ADT's liability will in no event  
exceed the purchase price of the system. Some states may not allow limitations on how long an implied warranty lasts, or the exclusion or  
limitations of incidental or consequential damages, so the above limitations and exclusions may not apply to you, unless a longer period is  
required by applicable law. Any action against ADT in connection with a system must be commenced within one year after the cause of  
action has occurred.  
No agent, employee or representative of ADT nor any other person is authorized to modify this warranty in any respect.  
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.  
2.  
Installation.  
ADT agrees to install the equipment in  
a
workmanlike manner in accordance with the following conditions:  
A. Customer will make premises available without interruption during ADT normal working hours 8:00A.M. to 4:30P.M., Monday through  
Friday, except Holidays. B. Customer understands that the installation will necessitate drilling into various parts of the premises: ADT  
intends, generally, to conceal wiring in the finished areas of the premises; however, there may be areas which, due to construction,  
decoration, or furnishing of the premises, ADT determines, in its sole discretion, that it would be impractical to conceal wiring and, in such  
cases, wiring will be exposed. C. Customer agrees to provide 110 VAC electrical outlets at designated locations for equipment requiring AC  
power. D. Customer to provide for lifting and replacing carpeting, if required, for installation of floor mats or wiring.  
ALL RIGHTS RESERVED  
No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means electronic,  
mechanical, photocopying, recording, or otherwise without the written permission of ADT Security Systems, Inc. The material in this  
publication is for information purposes and subject to change without notice. ADT Security Systems, Inc. assumes no responsibility for any  
errors which may appear in this publication.  
ADT Security Services, Inc.  
One Town Center Road  
Boca Raton, FL 33486  
Copyright 2007  
ÊK3693-1SIA†Š  
K3693-1SIA 1/07 Rev A  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Accusplit Fitness Electronics AE190XLM User Manual
Acnodes Server PC 5150 User Manual
Aga Ranges Stove Berrington User Manual
Altec Lansing Portable Speaker 1209B User Manual
Altec Lansing Speaker INMOTION User Manual
Alvin Indoor Furnishings X 3 XB User Manual
Alvin Mobility Aid CH444 User Manual
AMX Network Card RDM ZC User Manual
Asus Cell Phone P526 User Manual
Axor Indoor Furnishings 34010XX1 User Manual