Pro PatchTM
Optical Normal Through Panel
Module Front
Module Rear
Chassis Open
ADC’s Optical Normal Through Panel is the latest addition to its Pro Patch line of broadcast
patching products. This fiber panel is designed to provide patch by exception, normal through
functionality, similar to copper-based patch panels. Traditional fiber patch panels require a fiber
jumper to be in place at all times. With this newly designed panel, however, all fiber “Source”
and “Destination” connections are on the rear of the panel, with a normal through connection
between the “Source” and “Destination” ports. For greater convenience and reliability, patch and
monitoring capabilities are accessed on the front of the panel.
Features
Module specifications:
Two density options:
• Modules may be added to the chassis
as needed.
• The 3RU chassis houses 6 modules to
provide 24 fiber terminations (12 pairs)
using simplex connectors (SC, FC, ST).
• “Source” and “Destination” terminations
may be made by either splicing raw cable
to pigtails attached to the modules or by
routing connectorized patch cords to the
back of the modules.
• The 4RU chassis houses 6 modules to
provide 48 fiber terminations (24 pairs)
using small-form-factor connectors (LC).
Functionality:
• Manual switch on front of module to
change to “Patched” operation.
• Each module contains pairs of “Source” and
“Destination” fibers plus optional monitor
ports and a switch for emergency patching.
• LED indicators for “Normal” and
“Patched” operations.
• Accommodates 1310 and 1550 singlemode
wavelengths (switch wavelength range is
1290-1330 and 1525-1610).
• Modules are available with or without
monitor ports on the front.
Chassis specification:
• Connector ports on front and rear may be
SC, FC, ST or LC.
• 19" EIA flush mounting
• IL through module is approximately 0.5 dB
(final specifications TBD).
• Hot swappable power supply
to power switches inside modules
• Module port is configurable to 90/10, 95/5
or 99/1 split ratios.
• 110/220 IEC interface
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro PatchTM Optical Normal Through Panel
Pro Patch™ Preconfigured Panels
The information below explains the ordering numbers contained in the charts on this page.
Catalog Number
PPO - __ __ __ __ __ __ __ __ - __
Power Supply
Panel Size
0
No cord
3
4
3 RU
4 RU
1
With IEC cord
Rear Cable Management/splice
Modules Loaded
0
2
3
Patch cord slack storage
Heat shrink splice trays
Mass Fusion splice trays
1-6 Number of modules loaded
Front Patch Connector Style
2
7
J
SMFC
Rear Connector/Splice
SMSC
2
7
J
SMFC
SMSC (8º angled polish)
SMLC (4 RU only)
SMST
SMSC
8
4
SMSC (8º angled polish)
SMLC (4 RU only)
Pigtail for splicing
SMST
8
0
4
Switch Type
0
2
Standard individual
Pair switch together
Monitor Split Style
Monitor Port Connector
0
A
B
No monitor
90/10
0
F
No monitor
SMFC (8º angled polish)
SMSC (8º angled polish)
SMALC (4 RU only)
95/5
J
C
99/1
Q
Custom configurations are available. Please contact ADC Technical Assistance Center.
w w w . a d c . c o m
•
+ 1 - 9 5 2 - 9 3 8 - 8 0 8 0
•
1 - 8 0 0 - 3 6 6 - 3 8 9 1
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Pro Patch™ Modules
The information below explains the ordering numbers contained in the charts on this page.
Catalog Number
PPO-M __ __ __ __ __ __
Panel Size
Rear Connector/Splice
3
4
3 RU
4 RU
7
J
SMSC
SMSC (8º angled polish)
SMLC (4 RU only)
Pigtail for splicing
SMST
8
0
4
2
Front Patch Connector Style
2
7
J
SMFC
SMSC
SMFC
SMSC (8º angled polish)
SMST
Monitor Split Style
4
8
0
A
B
No monitor
90/10
SMLC (4 RU only)
Switch Type
95/5
C
99/1
0
2
Standard individual
Pair switch together
Monitor Port Connector
0
F
No monitor
SMFC (8º angled polish)
SMSC (8º angled polish)
SMALC (4 RU only)
J
Q
Custom configurations are available. Please contact ADC Technical Assistance Center.
From North America, Call Toll Free: 1-800-366-3891 • Outside of North America: +1-952-938-8080
Fax: +1-952-917-3237 • For a listing of ADC’s global sales office locations, please refer to our Web site.
ADC Telecommunications, Inc., P.O. Box 1101, Minneapolis, Minnesota USA 55440-1101
Specifications published here are current as of the date of publication of this document. Because we are continuously
improving our products, ADC reserves the right to change specifications without prior notice. At any time, you may
verify product specifications by contacting our headquarters office in Minneapolis. ADC Telecommunications, Inc.
views its patent portfolio as an important corporate asset and vigorously enforces its patents. Products or features
contained herein may be covered by one or more U.S. or foreign patents. An Equal Opportunity Employer
103447AE 9/06 Revison © 2006 ADC Telecommunications, Inc. All Rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
|