The Wireless Connectivity Expert
48511 Warm Springs Blvd., Suite 206, Fremont CA 94539
Tel: (510) 490-8024
Fax: (510) 623-7268
ACT-IR8250SW
Firmware download & configuration program
for IR8250PEK User’s Manual
April 09, 2004 Ver. 0.12
© Copyright 2003-2004 ACTiSYS Corporation
All Rights Reserved
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
ACTiSYS reserves the right to make changes without further notice to any
products herein to improve reliability, function or design. ACTiSYS does not
assume any liability arising out of the application or use of any product or
circuit described herein.
Page 2 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
Revision History
Revision
Rev. 0.01
Rev. 0.10
Rev. 0.11
Rev. 0.12
Date
Comment
03/08/2004 Preliminary Design Specification for internal review.
03/22/2004 Add uninstall procedure.
04/01/2004 Correct IR8250PEK photos.
04/09/2004 Only one typo corrected in the cover page.
The package includes:
1) IR8250SW.exe: Installer-v1.10-040422, and IR8250SW-v0.11-040402
2) IR8250SW Manual-v0.12-040409,
3) Two firmware files,
4) One config file.
Please run the setup program, those files will be installed into Windows “Programs”:
You can read the User's Manual by click
"Start"==>"Programs"==>"ACTiSYS"==>"ACT-IR8250SW".
Page 3 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
INSTALLATION FOR ACT-IR8250SW
Following is the installation instruction for ACTiSYS ACT-IR8250SW under Windows 2000.
Note: This program supports Windows 98/Me/2000/NT/XP.
1. Click on IR8250SW_Setup.exe to
execute InstallShield Wizard.
Click Next to continue.
2. Please Select “Typical”
(Recommend) Click Next button.
Page 4 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
3. Click OK to complete the
installation.
Page 5 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
UNINSTALLATION FOR ACT-IR8250SW
Following is the un-installation instruction for ACTiSYS ACT-IR8250SW software under Windows 2000.
1. Open the Control Panel and
select Add/Remove Programs.
Page 6 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
2. Select IR8250SW from the list.
Click Add/Remove to execute
the uninstall process.
3. Select “Remove” and click Next
button.
Page 7 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
4. Click Yes to uninstall the
IR8250SW software.
Page 8 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
APPLICATION GUIDE
Main Window Layout
Firmware file name
Tools Bar
Text box for
display the
download
status.
Click Download
button to start
the download
progress.
Click to stop
the download
progress.
Indicate which
COM port will
be used to
download.
Indicate the number
of frame sends to
IR8250.
Indicators for which
download function will
be executed when start
the download function.
Page 9 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
Setup function configuration
Set the current
configuration of
IR8250 host
interface.
Select IrLMP Hint
Bits to describe
your device
Specify a
Nickname of
IR8250.
application.
Ex. Printer,
The user string
will be used,
when each IrDA
device
Modem… etc.
Some IrDA stack
will get these to
verify and display
an icon.
discovered.
Specify a Device
Name of IR8250.
The user string
will be used
Save the current
settings and close
Setup window.
when IR8250 get
a “Device Name”
inquire.
For Microsoft IR Socket.
You can specify a “Class Name” for your application program usage.
Note: (Not all of the firmware version support this parameter.)
Page 10 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
Using IR8250SW
This tutorial illustrates how you may use the IR8250SW to download a firmware and change the config
settings.
Before reading this chapter you should:
ꢀ
ꢀ
ꢀ
Have installed the IR8250SW software, as described in the chapter Installation for ACT-IR8250SW.
Setup the IR8250P evaluation kit, as described in the IR8250P Specification.
Make sure that the AC adaptor (P1) and RS-232 cable (J2) has been connected correctly.
P1
J2
1. Click
StartsꢁProgramsꢁACTiSYSꢁIR8250SW
to run the IR8250SW software.
Page 11 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
P.S: If an Error message displayed as
below, which means the COM
port resource has been held for
other device. Please select
SetupꢁCOM Port Setup to
change COM port.
2. Click the FileꢁOpen Firmware
File to open the “File Browser
Dialog Box ”.
Page 12 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
3. Choose the firmware file (*.bin),
click OK button to load the
firmware.
Page 13 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
4. Click the Setup on the tools bar
and Enable Firmware Download
function.
5. Click SetupꢁConfig Setup (Refer
to Page# 10. Config Setup
Window Explain. ) to set the
Device name and IR8250 chips
information for your application.
Page 14 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
6. Click the Setup on the tools bar
and Enable Config Download
function.
7. Click Download button to
download the Config setup value
and update firmware to your
IR8250 chips
Page 15 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
8. Please remove J10, wait a second,
and restore J10 of IR82x0PEK
board. After that, click OK to start
download.
J10
J3
J4
J5
J11
Correct JUMPER setting for Download
Page 16 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
9. When you see the “Download
completed!” message which
means you have successful
updated the firmware.
If you do not remove and restore
J10 at step 8 correctly, or you click
the “Abort” button, or anything to
stop the download progress, you
will get the Error message shown
on the right side.
If this is the case, you will have to
check the IR8250SW settings,
COM port, AC adaptor, firmware
files or IR82x0PEK board. If all
right, click the Download button
again for complete download
progress.
Page 17 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
WARRANTY INFORMATION
ACTiSYS Corporation warrants to the first consumer purchaser, for a period of 1 year from the
date of purchase, that this wireless interface (The Product? Will be free from defective
workmanship and materials, and agrees that it will, at its option, either repair the defect or replace
the defective Product or part thereof at no charge to the purchaser for parts or for labor.
This warranty does not apply to any appearance items of the Product, any consumable items such
as paper, ink ribbon, or batteries supplied with the Product, or to any equipment or any hardware,
software, firmware, or peripheral other than the Product. This warranty does not apply to any
Product the exterior of which has been damaged or defected, which has been subjected to
misuse, abnormal service or handling, or which has been altered or modified in design,
construction or interfacing. Tampering With Label Voids Warranty.
In order to enforce the rights under this limited warranty, the purchaser should mail, ship, or carry
the Product, together with proof of purchase, to ACTiSYS .
The limited warranty described above is in addition to whatever implied warranties may be granted
to purchasers by law. To the extent permitted by applicable law, ALL IMPLIED WARRANTIES
INCLUDING THE WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR USE ARE
LIMITED TO A PERIOD OF 1 YEAR FROM THE DATE OF PURCHASE. Some states do not
allow limitations on how long an implied warranty lasts, so the above limitation may not apply to
you.
Neither the sales personnel of the seller nor any other person is authorized to make any
warranties other than those described above, or to extend the duration of any warranties beyond
the time period described above on behalf of ACTiSYS Corporation.
The warranties described above shall be the sole and exclusive remedy available to the
purchaser. Correction of defects, in the manner and for the period of time described above, shall
constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or
otherwise. In no event shall ACTiSYS Corporation be liable or in any way responsible, for any
damages or defects in the Product which were caused by repairs or attempted repairs performed
by anyone other than ACTiSYS technician. Nor shall ACTiSYS Corporation be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may
not apply to you.
Page 19 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
ACT-IR8250SW
User’s Manual
The Infrared Wireless Expert
CONTACT INFORMATION
ACTiSYS Corporation.
48511 Warm Springs Blvd, Suite 206
Fremont, CA 94539, USA
TEL: (510) 490-8024, FAX: (510) 623-7268
E-Mail: [email protected]
Web: www.actisys.com
Page 20 of 20
© Copyright 2003-2004 ACTiSYS Corp.
Version 0.12
April 09, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
|